ZH
RU
ES

Liquid and solid phase detection

Liquid and solid phase detection, Total:500 items.

In the international standard classification, Liquid and solid phase detection involves: Optics and optical measurements, Equipment for petroleum and natural gas industries, Water quality, Pumps, Cereals, pulses and derived products, Vocabularies, Analytical chemistry, Biology. Botany. Zoology, Protection against crime, Milk and milk products, Food products in general, Metrology and measurement in general, General methods of tests and analysis for food products, Welding, brazing and soldering, Materials for aerospace construction, Extraction and processing of petroleum and natural gas, Rubber, Meat, meat products and other animal produce, Animal feeding stuffs, Fluid power systems, Fruits. Vegetables, Beverages, Prepackaged and prepared foods, Beekeeping, Testing of metals, Edible oils and fats. Oilseeds, Non-destructive testing, Photography, Terminology (principles and coordination), Soil quality. Pedology, Laboratory medicine, Fuels, Non-ferrous metals, Iron and steel products, Medical sciences and health care facilities in general, Measurement of volume, mass, density, viscosity, Paint ingredients, Products of the textile industry, Footwear, Sugar. Sugar products. Starch, Road engineering, Farming and forestry, Products of the chemical industry, Tea. Coffee. Cocoa, Environmental protection, Burners. Boilers, Organic chemicals, Air quality, Spices and condiments. Food additives, Hydraulic fluids.


Association Francaise de Normalisation, Liquid and solid phase detection

  • NF X45-600:1992 liquid - solid separation - Specifications for defining liquid-solid separating equipment
  • NF EN 15890:2010 Denrées alimentaires - Dosage de la patuline dans le jus de fruits et la compote de fruits en alimentation infantile - Méthode par CLHP avec purification par partition liquide-liquide et extraction en phase solide et détection UV
  • NF T90-123*NF EN ISO 11369:1997 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction.
  • NF EN ISO 17495:2003 Qualité de l'eau - Dosage des nitrophénols sélectionnés - Méthode par extraction en phase solide avec détection par chromatographie en phase gazeuse et spectrométrie de masse
  • NF EN ISO 11369:1997 Qualité de l'eau - Dosage de certains agents de traitement des plantes - Méthode par chromatographie en phase liquide haute performance (CLHP) avec détection UV après extraction solide-liquide
  • NF T90-181*NF EN ISO 17495:2003 Water quality - Determination of selected nitrophenols - Method by solid phase extraction and gas chromatography with mass spectrometric detection.
  • NF T51-506:2011 Plastics - Thermosetting resins - Analysis by liquid chromatography (HPLC)
  • NF EN ISO 17993:2004 Qualité de l'eau - Dosage de 15 hydrocarbures aromatiques polycycliques (HAP) dans l'eau par HPLC avec détection par fluorescence après extraction liquide-liquide
  • NF V03-068*NF EN 15890:2010 Foodstuffs - Determination of patulin in fruit juice and fruit based puree for infants and young children - HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection.
  • NF EN ISO 22478:2006 Qualité de l'eau - Dosage de certains explosifs et de composés apparentés - Méthode par chromatographie en phase liquide à haute performance (CLHP) avec détection UV
  • NF EN 12679:2018 Essais non destructifs - Contrôle radiographique - Détermination de la dimension des sources de radiographie industrielle gamma
  • NF E38-334:2023 Echangeurs monophasiques liquide/liquide - Procédure d'essai pour la détermination de la performance
  • NF M07-083:1995 Liquid fuels. Identificxation of colza methyl ester inmiddle distillate. Method by liquid and gas chromatography.
  • NF ISO 11264:2008 Qualité du sol - Dosage des herbicides - Méthode par CLHP avec détection par UV
  • NF X31-404-1*NF ISO 11916-1:2013 Soil quality - Determination of selected explosives and related compounds - Part 1 : method using high-performance liquid chromatography (HPLC) with ultraviolet detection
  • NF EN 14176:2017 Produits alimentaires - Dosage de l'acide domoïque dans les coquillages crus, les poissons crus et les moules cuites par CLHP en phase inverse couplée à la détection UV
  • NF EN 15911:2010 Denrées alimentaires - Détermination simultanée de neuf édulcorants par chromatographie liquide haute performance et détection à diffusion de lumière
  • NF V05-323:1995 Tea and instant tea in solid form. Determination of caffeine content. Method using high-performance liquid chromatography.
  • NF EN 16956:2017 Cosmétiques - Méthodes analytiques - Méthode CLHP couplée à la détection UV pour l'identification et l'analyse de l'hydroquinone, de ses éthers et des corticostéroïdes dans les produits cosmétiques éclaircissants de la peau
  • NF A09-018*NF ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
  • NF M41-017*NF EN 16423:2014 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection
  • NF T60-255*NF EN ISO 15302:2017 Animal and vegetable fats and oils - Determination of benzo[a]pyrene - Reverse-phase high performance liquid chromatography method
  • NF T90-115:2004 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction.
  • NF T90-189*NF ISO 16308:2014 Water quality - Determination of glyphosate and AMPA - Method using high performance liquid chromatography (HPLC) with tandem mass spectrometric detection
  • NF EN 16162:2012 Aliments des animaux - Dosage du décoquinate par chromatographie liquide à haute performance (CLHP) avec détection par fluorescence

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Liquid and solid phase detection

  • GB/T 32212-2015 Standard practice for testing fixed-wavelength photometric detectors used in liquid chromatography
  • GB/T 25221-2010 Inspection of grain and oils.Determination of ergosterol in grain.Normal phase high performance liquid chromatography
  • GB/T 22220-2008 Determination of cholesterol in foods.High-performance liquid chromatography
  • GB/T 23209-2008 Determination of lutein in milk powder.HPLC-UV method
  • GB/T 35024-2018 Detection method of mammals and poultry ingredients.Suspended bead array
  • GB/T 22400-2008 Rapid determination of melamine in raw milk. High performance liquid chromatography method
  • GB/T 14041.2-1993 Hydraulic fluid power.Filter elements.Verification of material compatibility with fluids
  • GB/T 12604.2-2005 Non-destructive testing.Terminology.Terms used in radiographic testing
  • GB/T 6526-1986 Self-fluxing alloy powders--Determination of solidus-liquidus temperature range
  • GB/T 23217-2008 Determination of tetrodotoxin in aquatic products.HPLC-fluorescence detection method
  • GB/T 20747-2006 Method for the determination of metabolite residues of dipyrone in bovine and porcine muscle tissues LC-UV and LC-MS-MS method
  • GB/T 20768-2006 Method for the determination of biogenic amines in fish and shrimp LC-UV detection method
  • GB/T 32563-2016 Non-destructive testing.Ultrasonic testing.Test method for phased-array ultrasonic testing
  • GB/T 5677-2007 Radiographic testing for steel castings
  • GB/T 23196-2008 Determination of ferulic acid content in propolis.HPLC-UV method
  • GB/T 20754-2006 Method for the determination of phenylbutazone in livestock and poultry muscles LC-UV detection method
  • GB/T 17592.2-1998 Textiles--Test method of the use of banned azo colourants--High pressure liquid chromatography method
  • GB/T 19681-2005 The method for the determination of Sudan dyes in foods-High performance liquid chromatography
  • GB/T 26625-2011 Inspection of grain and oils.Determination of soybean isoflavone.High performance liquid chromatography
  • GB/T 20760-2006 Method for the determination of α-trenbolone,β-trenbolone residues in bovine muscle, liver and kidney LC-UV method and LC-MS-MS method
  • GB/T 21317-2007 Determination of tetracyclines residues in food of animal origin－LC-MS/MS method and HPLC method
  • GB/T 29636-2013 GC,HPLC and GC-MS examination methods for methylamphetamine in suspected drug
  • GB/T 17455-2008 Non-destrctive testing.Metallographic replica techniques of surface examination
  • GB/T 22996-2008 Determination of ginsenosides in ginseng.LC-UV method
  • GB/T 20745-2006 Method for the determination of decoquinate residues in livestork and poultry muscles LC-fluorescence detection method
  • GB/T 20750-2006 Determination of flunixin meglumine residue in bovine muscle tissue LC-UV method
  • GB/T 18932.14-2003 Method for the determination of benzaldehyde residues in honey-HPLC-fluorescence detection method
  • GB/T 24903-2010 Inspection of grain and oils-Determination of resveratrol in peanut by high performance liquid chromatography
  • GB/T 14041.2-2007 Hydraulic fluid power Filter elements Part 2 : Verification of material compatibility with fluids
  • GB/T 2921-1982 Chemical reagents--Classification and nomenclature of liquid stationary phase for gas chromatography
  • GB/T 6022-1999 Butadiene for indusdrial use-Determination of oxygen in the gaseous phase above liquid butadiene-Gas chromatographic method
  • GB/T 18932.13-2003 Method for the determination of phenol residues in honey-HPLC-fluorescence detection method
  • GB/T 18932.18-2003 Method for the determination of hydroxymethylfurfural in honey-HPLC-UV detection method
  • GB/T 23910-2009 Non-destructive testing.Metal intensifying screens for radiographic testing
  • GB/T 20362-2006 Method for the determination of clopidol residues in eggs. High performance liquid chromatographic
  • GB/T 23496-2009 Determination of forbidden materials in foods.Dyes of basic orange.High performance liquid chromatography method
  • GB/T 22509-2008 Animal and vegetable fats and oil.Determination of benzo(α)pyrene-Reverse-phase high performance liquid chromatography method
  • GB/T 32268-2015 Method for Determination of Performance of Octadecyl Bonded Phase (C18) High Performance Liquid Chromatography Column
  • GB/T 19427-2003 Method for the determination of rutin,myricetin,quercetin,kaempferol,apigenin,pinocembrin,chrysin,galangin contents in propolis-LC-MS-MS detection method and LC-UV detection method
  • GB/T 22980-2008 Determination of flunixin residues in bovine milk and milk powder.LC-UV method

Professional Standard - Petroleum, Liquid and solid phase detection

  • SY/T 5382-1991 Drilling Fluid Solid Phase Content Meter
  • SY 5382-2009 Drilling Fluid Solid Phase Content Meter
  • SY 6677-2007 Calibration Method of Drilling Fluid Solid Phase Quantity Meter
  • SY/T 6677-2007 Calibration method of drilling fluid retort assembly
  • SY/T 5834-2007 Performance specifications and measuring methods of low-solid killing fluid
  • SY/T 5834-1993 Measurement method and evaluation index of low solids killing fluid performance
  • SY/T 5612-2007 Specification for solids control equipments of drilling fluid
  • SY/T 5834-2014 Performance specifications and measuring methods of low-solid killing fluid
  • SY 5834-2014 Performance evaluation index and evaluation method of low solids killing fluid

国家能源局, Liquid and solid phase detection

  • SY/T 5382-2009 Drilling fluid solid phase content measuring instrument
  • SY/T 6677-2022 Calibration method of drilling fluid solid phase content measuring instrument

Shandong Provincial Standard of the People's Republic of China, Liquid and solid phase detection

  • DB37/T 4148-2020 Determination of Water Quality 2,4-D by Solid Phase Extraction-Liquid Chromatography
  • DB37/T 4157-2020 Determination of Carbofuran in Water by Solid Phase Extraction-Liquid Chromatography
  • DB37/T 4161-2020 Determination of Water Quality Aldicarb Solid Phase Extraction-Liquid Chromatography
  • DB37/T 4155-2020 Determination of Water Quality Chlorpyrifos Solid Phase Extraction-Liquid Chromatography
  • DB37/T 4146-2020 Determination of Benzidine in Water by Solid Phase Extraction-Liquid Chromatography-Tandem Mass Spectrometry
  • DB37/T 4158-2020 Determination of Water Quality Environmental Hormone Compounds by Solid Phase Extraction-Liquid Chromatography-Tandem Mass Spectrometry
  • DB37/T 4162-2020 Determination of Odor and Taste Substances in Water Quality by Solid Phase Extraction-Gas Chromatography-Mass Spectrometry

Korean Agency for Technology and Standards (KATS), Liquid and solid phase detection

  • KS I ISO 20179-2006(2016) Water quality－Determination of microcystins－Method using solid phase extraction(SPE) and high performance liquid chromatography(HPLC) with ultraviolet(UV) detection
  • KS I ISO 20179:2021 Water quality — Determination of microcystins — Method using solid phase extraction(SPE) and high performance liquid chromatography(HPLC) with ultraviolet(UV) detection
  • KS I ISO 20179:2006 Water quality－Determination of microcystins－Method using solid phase extraction(SPE) and high performance liquid chromatography(HPLC) with ultraviolet(UV) detection
  • KS I ISO 11369:2008 Water quality－Determination of selected plant treatment agents－Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • KS I ISO 17495-2007(2017) Water quality－Determination of selected nitrophenols－Method by solidphase extraction and gas chromatography with mass spectrometric detection
  • KS I ISO 11369-2008(2018) Water quality－Determination of selected plant treatment agents－Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • KS I ISO 2943-2005(2020) Hydraulic fluid power－Filter elements－Verification of material compatibility with fluids
  • KS I ISO 17993-2008(2013) Water quality－Determination of 15 polycyclic aromatic hydrocarbons(PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction
  • KS I ISO 22478:2021 Water quality — Determination of certain explosives and related compounds — Method using high-performance liquid chromatography(HPLC) with UV detection
  • KS I ISO 11264-2016(2021) Soil quality－Determination of herbicides－Method using HPLC with UV-detection
  • KS I ISO 16362-2005(2020) Ambient air－Determination of particle－phase polycyclic aromatic hydrocarbons by high performance liquid chromatography
  • KS I ISO 21458:2021 Water quality — Determination of glyphosate and AMPA —Method using high performance liquid chromatography(HPLC)and fluorometric detection
  • KS M 1987-2002(2007) Butadiene for industrial use－Determination of oxygen and argon in the gaseous phase above liquid butadiene－Gas chromatographic method
  • KS I ISO 17993:2022 Water quality — Determination of 15 polycyclic aromatic hydrocarbons — PAH in water by HPLC with fluorescence detection after liquid-liquid extraction
  • KS M 2800-1-2007(2017) Determination of aromatic hydrocarbon types in oil spill dispersant－High performance liquid chromatography method with refractive index detection
  • KS I ISO 21458-2011(2016) Water quality - Determination of glyphosate and AMPA - Method using high performance liquid chromatography(HPLC) and fluorometric detection
  • KS B ISO 3057:2018 Non-destructive testing — Metallographic replica techniques of surface examination

Professional Standard - Environmental Protection, Liquid and solid phase detection

  • HJ 478-2009 Water quality.Determination of polycyclic aromatic hydrocarbons.Liquid-liquid extraction and solid-phase extraction followed by high performance liquid chromatographic method
  • HJ 648-2013 Water quality.Determination of nitroaromatics by gas chromatography
  • HJ 914-2017 Water Quality Determination of Paraquat and Diquat Solid Phase Extraction-High Performance Liquid Chromatography
  • HJ 892-2017 Determination of Polycyclic Aromatic Hydrocarbons in Solid Waste by High Performance Liquid Chromatography
  • HJ 1192-2021 Water Quality Determination of 9 Alkylphenol Compounds and Bisphenol A by Solid Phase Extraction/High Performance Liquid Chromatography
  • HJ/T 40-1999 Stationary source emission.Determination of benzo(a)pyrene.High performance liquid chromatography
  • HJ 1153-2020 Determination of aldehydes and ketones in waste gas from stationary pollution sources Solution absorption-high performance liquid chromatography

International Organization for Standardization (ISO), Liquid and solid phase detection

  • ISO 20179:2005 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection
  • ISO 11369:1997 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • ISO/CD 32679:2011 Non-destructive testing — Radiographic testing — Determination of the size of industrial radiographic gamma sources
  • ISO/DIS 32679:2023 Non-destructive testing — Radiographic testing — Determination of the size of industrial radiographic gamma sources
  • ISO 4773:2023 Non-destructive testing — Ultrasonic guided-wave testing using the phased-array technique
  • ISO 15885:2002 Milk fat - Determination of the fatty acid composition by gas-liquid chromatography
  • ISO 15885:2002|IDF 184:2002 Determination of fatty acid composition of milk fat by gas-liquid chromatography
  • ISO 13875:2005 | IDF 178:2005 Liquid milk — Determination of acid-soluble beta-lactoglobulin content — Reverse-phase HPLC method
  • ISO 10727:1995 Tea and instant tea in solid form - Determination of caffeine content - Method using high-performance liquid chromatography
  • ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
  • ISO 13875:2005 Liquid milk - Determination of acid-soluble -lactoglobulin content - Reverse-phase HPLC method
  • ISO 13875:2005|IDF 178:2005 Determination of acid-soluble β-lactoglobulin content in liquid milk by reversed-phase high performance liquid chromatography
  • ISO 11916-1:2013 Soil quality.Determination of selected explosives and related compounds.Part 1: Method using high-performance liquid chromatography (HPLC) with ultraviolet detection
  • ISO 16308:2014 Water quality - Determination of glyphosate and AMPA - Method using high performance liquid chromatography (HPLC) with tandem mass spectrometric detection
  • ISO 19563:2017 Determination of theanine in tea and instant tea in solid form using high-performance liquid chromatography
  • ISO 10727:2002 Tea and instant tea in solid form - Determination of caffeine content - Method using high-performance liquid chromatography

Professional Standard - Machinery, Liquid and solid phase detection

  • JB/T 9358-1999 Test method for fixed wavelength (254nm) UV detector used in liquid chromatography
  • JB/T 7902-2006 Non-destructive testing Image quality indicators (wire type) for radiographic testing
  • JB/T 5075-2004 Metal intensifying screens for non-destructive testing radiography

German Institute for Standardization, Liquid and solid phase detection

  • DIN EN 15890:2010-12 Foodstuffs - Determination of patulin in fruit juice and fruit based purée for infants and young children - HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection; German version EN 15890:2010
  • DIN EN ISO 17495:2003-09 Water quality - Determination of selected nitrophenols - Method by solid phase extraction and gas chromatography with mass spectrometric detection (ISO 17495:2001); German version EN ISO 17495:2003
  • DIN ISO 20179:2007-10 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection (ISO 20179:2005)
  • DIN EN ISO 11369:1997-11 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997); German version EN ISO 11369:1997
  • DIN EN 15890:2010 Foodstuffs - Determination of patulin in fruit juice and fruit based purée for infants and young children - HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection; German version EN 15890:2010
  • DIN EN 17503:2020 Environmental solid matrices - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC); German and English version prEN 17503:2020
  • DIN ISO 20179:2007 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection (ISO 20179:2005) English version of DIN ISO 20179:2007-10
  • DIN 55978:1981 Testing of dyestuffs; determination of the relative tinting strength in solutions; spectrophotometric method
  • DIN 55978:2021 Testing of dyestuffs - Determination of the relative tinting strength in solutions - Spectrophotometric method
  • DIN EN ISO 22478:2006-07 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006); German version EN ISO 22478:2006
  • DIN ISO 10727:2004-05 Tea and instant tea in solid form - Determination of caffeine content - Method using high-performance liquid chromatography (ISO 10727:2002)
  • DIN EN ISO 17993:2004-03 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction (ISO 17993:2002); German version EN ISO 17993:2003
  • DIN ISO 10727:2004 Tea and instant tea in solid form - Determination of caffeine content - Method using high-performance liquid chromatography (ISO 10727:2002)
  • DIN EN 12679:2018-12 Non-destructive testing - Radiographic testing - Determination of the size of industrial radiographic gamma sources; German version EN 12679:2018
  • DIN EN ISO 15302:2017-07 Animal and vegetable fats and oils - Determination of benzo[a]pyrene - Reverse-phase high performance liquid chromatography method (ISO 15302:2017); German version EN ISO 15302:2017
  • DIN EN ISO 11369:1997 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997); German version EN ISO 11369:1997

Group Standards of the People's Republic of China, Liquid and solid phase detection

  • T/ZZB 3063-2023 Solid-liquid two-phase flow hydraulic diaphragm pump
  • T/DLSHXH 011-2023 Liquid Chromatography Column for Detection of Aromatic Hydrocarbons in Diesel Oil
  • T/HNIMA 001-2023 Calibration method for liquid chromatograph with charged aerosol detector
  • T/DLSHXH 010-2023 Standard column for normal phase test of liquid chromatograph
  • T/GDSES 2-2022 Water quality—Determination of antibiotics—Solid phase extraction-high performance liquid chromatography-tandem mass spectrometry
  • T/JAASS 18-2021 Determination of vitamin A, D, E in milk and milk powder by On-line solid phase extraction - heart cutting of two-dimensional liquid phase chromatography
  • T/GDPA 1-2019 Determination of stereoisomers of Dihydromyricetin--High performance liquid chromatography method
  • T/CSES 112-2023 Water quality — Determination of tris (2-chloroethyl) phosphate— Solid phase extraction/liquid chromatography-triple quadrupole mass spectrometry
  • T/SATA 0004-2017 Liquid chromatography-tandem mass spectrometry for the detection of sulfa drug residues in animal urine
  • T/NXCL 026-2023 Method for determination of beryllium bronze β phase
  • T/GDSES 3-2022 Soil—Determination of antibiotics—Ultrasonic extraction-solid phase extraction-high performance liquid chromatography-tandem mass spectrometry
  • T/SHSYCXH 11-2022 Determination of free amino acids in serum—Liquid chromatography tandem mass spectrometry
  • T/CASMES 72-2022 Total 25-hydroxyl vitamin D testing kit(LC-MS-MS method)
  • T/SHSOT 011-2023 Determination of hydroxypropyl Tetrahydropyrantriol in cosmetics—Liquid chromatography
  • T/CAIA YQ005-2018 Performance testing method of liquid chromatograph
  • T/WHAS 045-2023 Determination of 24 drugs residues in eggs by Liquid chromatography – tandem mass spectrometry
  • T/CSATC 5-2020 Determination of Silk? by High Performance Liquid Chromatography

American Society for Testing and Materials (ASTM), Liquid and solid phase detection

  • ASTM E685-93 Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
  • ASTM E685-93(2013) Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
  • ASTM E685-93(2021) Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
  • ASTM E1303-95(2005) Practice for Refractive Index Detectors Used in Liquid Chromatography
  • ASTM E1303-95 Practice for Refractive Index Detectors Used in Liquid Chromatography
  • ASTM E1303-95(2000) Practice for Refractive Index Detectors Used in Liquid Chromatography
  • ASTM E594-96(2001) Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
  • ASTM E1303-95(2010) Practice for Refractive Index Detectors Used in Liquid Chromatography
  • ASTM E1303-95(2017) Standard Practice for Refractive Index Detectors Used in Liquid Chromatography
  • ASTM D2580-06(2012) Standard Test Method for Phenols in Water by Gas-Liquid Chromatography
  • ASTM D5534-94(1999) Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
  • ASTM E594-96(2006) Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
  • ASTM E594-96(2011) Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography

KR-KS, Liquid and solid phase detection

  • KS I ISO 20179-2021 Water quality — Determination of microcystins — Method using solid phase extraction(SPE) and high performance liquid chromatography(HPLC) with ultraviolet(UV) detection
  • KS I ISO 22478-2021 Water quality — Determination of certain explosives and related compounds — Method using high-performance liquid chromatography(HPLC) with UV detection
  • KS I ISO 11264-2016 Soil quality－Determination of herbicides－Method using HPLC with UV-detection
  • KS D 0227-2023 Radiographic testing for steel castings
  • KS I ISO 21458-2021 Water quality — Determination of glyphosate and AMPA —Method using high performance liquid chromatography(HPLC)and fluorometric detection
  • KS I ISO 17993-2022 Water quality — Determination of 15 polycyclic aromatic hydrocarbons — PAH in water by HPLC with fluorescence detection after liquid-liquid extraction
  • KS B ISO 3057-2018 Non-destructive testing — Metallographic replica techniques of surface examination

水利部, Liquid and solid phase detection

  • SL 761-2018 Water Quality Determination of Atrazine Solid Phase Extraction-High Performance Liquid Chromatography
  • SL/T 739-2016 Water Quality Determination of Organophosphorus Pesticides Solid Phase Extraction-Gas Chromatography

Anhui Provincial Standard of the People's Republic of China, Liquid and solid phase detection

  • DB34/T 1843-2013 Molecularly imprinted solid-phase extraction-liquid chromatography-tandem mass spectrometry for the detection of triazine herbicides in water
  • DB3403/T 02-2020 Solid Phase Extraction-High Performance Liquid Chromatography of Synthetic Colorants in Food
  • DB34/T 4207-2022 Determination of Ofloxacin in Chicken Excreta by High Performance Liquid Chromatography-Fluorescence Detection
  • DB34/T 2992-2017 Determination of optical brighteners in detergent products by high performance liquid chromatography
  • DB34/T 1765-2012 Determination of Cholesterol Content in Animal Fats and Fats by Liquid Chromatography Tandem Mass Spectrometry

未注明发布机构, Liquid and solid phase detection

  • BS EN ISO 11369:1997(2008)*BS 6068-2.61:1997 Water quality — Determination of selected plant treatment agents — Method using high performance liquid chromatography with UV detection after solid - liquid extraction
  • BS EN ISO 17495:2003(2008) Water quality — Determination of selectednitrophenols — Method by solid - phase extraction and gas chromatography with mass spectrometric detection
  • SAE AMS4777J-2018 Nickel Alloy, Brazing Filler Metal 82Ni 4.5Si 7.0Cr 3.1B 3.0Fe, 1780 to 1830°F (971 to 999°C) Solidus-Liquidus Range
  • BS EN ISO 17993:2003(2004)*BS 6068-2.79:2003 Water quality — Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid - liquid extraction
  • SAE AMS4783G-2014 Brazing Filler Metal@ High Temperature 50Co - 8.0Si - 19Cr - 17Ni - 4.0W - 0.80B 2050° - 2100°F (1120° - 1150°C) Solidus-Liquidus Range
  • BS EN 1435:1997(2004) Non - destructive testing of welds — Radiographic testing of welded joints

Professional Standard - Supply and Marketing Cooperative, Liquid and solid phase detection

  • GH/T 1081-2012 Determination of poplar tree gum in propolis.Reversed-phase high performance liquid chromatography method

HU-MSZT, Liquid and solid phase detection

Liaoning Provincial Standard of the People's Republic of China, Liquid and solid phase detection

  • DB21/T 3116-2019 Determination of Gluco-oligosaccharide Content by Liquid Chromatography
  • DB21/T 3286-2020 Determination of five sulfonamide antibiotics in water quality by solid phase extraction high performance liquid chromatography-triple quadrupole tandem mass spectrometry

Danish Standards Foundation, Liquid and solid phase detection

  • DS/ISO 20179:2007 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection
  • DS/EN ISO 11369:1998 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • DS/EN ISO 17495:2003 Water quality - Determination of selected nitrophenols - Method by solid-phase extraction and gas chromatography with mass spectrometric detection
  • DS/EN 15890:2011 Foodstuffs - Determination of patulin in fruit juice and fruit based purée for infants and young children - HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection
  • DS/EN 16162:2012 Animal feeding stuffs - Determination of decoquinate by HPLC with fluorescence detection
  • DS/EN ISO 22478:2006 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection
  • DS/ISO 16362:2007 Ambient air - Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography
  • DS/EN ISO 15302:2010 Animal and vegetable fats and oils - Determination of benzo[a]pyrene - Reverse-phase high performance liquid chromatography method

National Metrological Verification Regulations of the People's Republic of China, Liquid and solid phase detection

  • JJG 705-2002 Verification Regulation of Liquid Chromatographs
  • JJG 705-2014 Liquid Chromatographs
  • JJG 721-1991 Verification Regulation of 500MHz Phase Noise Measurement Set (Phase Detector Method)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Liquid and solid phase detection

  • GB/T 19495.9-2017 Detection of genetically modified organisms and derived products—Liquid bead array detection for plant products
  • GB/T 34782-2017 Method for the determination of poplar tree gum in propolis—High performance liquid chromatography
  • GB/T 35867-2018 Inspection of grain and oils—Determination of phospholipids content in lecithins—high performance liquid chromatography using a light-scattering detector

Professional Standard - Public Safety Standards, Liquid and solid phase detection

  • GA/T 1616-2019 Chloramphenicol Test in Forensic Science Biological Samples by Liquid Chromatography and Liquid Chromatography-Mass Spectrometry
  • GA/T 1642-2019 Liquid Chromatography and Liquid Chromatography-Mass Spectrometry for Cannabis Detection in Forensic Science Suspected Drugs
  • GA/T 1648-2019 Liquid Chromatography and Liquid Chromatography-Mass Spectrometry for Crow P Test in Suspected Drugs in Forensic Sciences
  • GA/T 1617-2019 Detection of Strychnine and Strychnine in Forensic Science Biological Samples by Liquid Chromatography and Liquid Chromatography-Mass Spectrometry
  • GA/T 1602-2019 Liquid chromatography and liquid chromatography-mass spectrometry for the detection of diazepam and its metabolites in forensic science biological samples
  • GA/T 1629-2019 Paraquat detection in blood and urine for forensic science by gas chromatography and gas chromatography-mass spectrometry
  • GA/T 1646-2019 Metsa T-Test Liquid Chromatography and Liquid Chromatography-Mass Spectrometry in Suspected Drugs in Forensic Science
  • GA/T 1645-2019 Liquid Chromatography and Liquid Chromatography-Mass Spectrometry for the Detection of Cocaine in Suspected Drugs in Forensic Science
  • GA/T 2031-2023 Forensic sciences—Examination methods for dolantin in suspected drugs—LC and LC-MS
  • GA/T 2035-2023 Forensic sciences—Examination methods for caffeine in suspected drugs—LC and LC-MS
  • GA/T 2039-2023 Forensic sciences—Examination methods for tramadol in suspected drugs—LC and LC-MS
  • GA/T 2027-2023 Forensic sciences—Examination methods for phencyclidine in suspected drugs—LC and LC-MS
  • GA/T 2029-2023 Forensic sciences—Examination methods for buprenorphine in suspected drugs—LC and LC-MS
  • GA/T 1327-2016 Gas chromatography, gas chromatography-mass spectrometry and liquid chromatography-tandem mass spectrometry methods for the detection of zolpidem in forensic science biological samples
  • GA/T 1789-2021 Liquid Chromatography-Mass Spectrometry, Gas Chromatography-Mass Spectrometry, and Liquid Chromatography for the Detection of Hydroxylimine in Suspected Precursor Chemicals in Forensic Science
  • GA/T 2023-2023
  • GA/T 2033-2023 Forensic Sciences—Examination methods for dihydroetorphine in suspected drug—LC and LC-MS
  • GA/T 1623-2019 Gas Chromatography-Mass Spectrometry and Liquid Chromatography-Mass Spectrometry for the Detection of Aldicarb in Forensic Science Biological Samples
  • GA/T 1621-2019 Gas Chromatography-Mass Spectrometry and Liquid Chromatography-Mass Spectrometry for the Detection of Buprofezin in Forensic Science Biological Samples
  • GA/T 121-2019 Gas Chromatography-Mass Spectrometry and Liquid Chromatography-Mass Spectrometry for Cantharidin Detection in Forensic Science Biological Samples
  • GA/T 1633-2019 Forensic Science Blood, Urine Ethyl Glucuronide Detection Gas Chromatography-Mass Spectrometry and Liquid Chromatography-Mass Spectrometry
  • GA/T 1535-2018 Liquid chromatography-mass spectrometry for the detection of diphenoxylate in biological samples
  • GA/T 1631-2019 Forensic science blood, urine, mirtazapine and fluoxetine testing by gas chromatography and gas chromatography-mass spectrometry
  • GA/T 1929-2021 Liquid Chromatography and Liquid Chromatography-Mass Spectrometry for the Detection of AB-CHMINACA, AB-FUBINACA, and AB-PINACA in Suspected Drugs in Forensic Science
  • GA/T 2025-2023
  • GA/T 1637-2019 Test of four sulfonylurea herbicides including metsulfuron-methyl in blood for forensic science by liquid chromatography and liquid chromatography-mass spectrometry
  • GA/T 1515-2018 Forensic Science Gasoline Residue Extraction Test Solid Phase Microextraction-Gas Chromatography-Mass Spectrometry
  • GA/T 1923-2021 Detection of 8 Fentanyl-like Substances in Suspected Drugs in Forensic Science by Liquid Chromatography and Liquid Chromatography-Mass Spectrometry
  • GA/T 1784-2021 Liquid Chromatography and Liquid Chromatography-Mass Spectrometry for the Detection of α-PBP, α-PVP, and 4-F-α-PVP in Forensic Science Suspected Drugs
  • GA/T 187-2021 Gas Chromatography-Mass Spectrometry and Liquid Chromatography-Mass Spectrometry for Dichlorvos and Trichlorfon in Forensic Science Biological Samples
  • GA/T 1643-2019 Detection of MDMA in Suspected Drugs in Forensic Science by Liquid Chromatography and Liquid Chromatography-Mass Spectrometry
  • GA/T 1622-2019 Gas Chromatography, Gas Chromatography-Mass Spectrometry and Liquid Chromatography-Mass Spectrometry for the Examination of Nereistoxin, Dimehytap, Cyclodime and Cartap in Forensic Science Biological Samples
  • GA/T 1316-2016 GC and GC-MS examination methods for ketamine in hair and blood samples of forensic science
  • GA/T 1619-2019 Gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry for the detection of methomyl and methomyl oxime in forensic science biological samples
  • GA/T 1601-2019 Detection of Fentanyl in Forensic Science Biological Samples by Liquid Chromatography-Mass Spectrometry
  • GA/T 1618-2019 Mesa T-test liquid chromatography-mass spectrometry in forensic science biological samples
  • GA/T 1910-2021 Detection of Paraquat in Forensic Science Biological Samples by Liquid Chromatography-Mass Spectrometry
  • GA/T 1513-2018 High Performance Liquid Chromatography for Forensic Science Stamp Color Trace Test

RU-GOST R, Liquid and solid phase detection

  • GOST R 51471-1999 Milk fat. Detection method of vegetable fat by gas-liquid chromatography of sterols
  • GOST R 53911-2010 Vegetable oils. Determination of organochlorme pesticides using gas-liquid chromatography method
  • GOST 32308-2013 Meat and meat products. Gas-liquid chromatography method of determination of the content of chlorine organic pesticide
  • GOST 32771-2014 Juice products. Determination of organic acids by reversed-phase High Performance Liquid Chromatography (HPLC)
  • GOST R 53955-2010 Animal and vegetable fats and oils. Determination of benzo(a)pyrene. Reverse-phase high performance liquid chromatography method

European Committee for Standardization (CEN), Liquid and solid phase detection

  • EN ISO 11369:1997 Water Quality - Determination of Selected Plant Treatment Agents - Method Using High Performance Liquid Chromatography with UV Detection After Solid-Liquid Extraction ISO 11369: 1997
  • EN 16162:2012 Animal feeding stuffs - Determination of decoquinate by HPLC with fluorescence detection
  • EN ISO 17495:2003 Water quality Determination of selected nitrophenols Method by solid-phase extraction and gas chromatography with mass spectrometric detection

Society of Automotive Engineers (SAE), Liquid and solid phase detection

  • SAE AMS4778H-2002 Nickel Alloy Brazing Filler Metal 92Ni 4.5Si 3.1B, 1800 to 1900°F Solidus-Liquidus Range
  • SAE AMS4778K-2013 Nickel Alloy, Brazing Filler Metal 92Ni 4.5Si 3.1B, 1800 to 1900°F Solidus-Liquidus Range
  • SAE AMS4787F-2000 Gold-Nickel Alloy, Brazing Filler Metal, High Temperature, 82Au 18Ni, 1740°F (949°C) Solidus-Liquidus Temperature
  • SAE AMS4779G-2005 Nickel Alloy, Brazing Filler Metal 94Ni 3.5Si 1.8B 1800 to 1950°F (982 to 1066°C) Solidus-Liquidus Range
  • SAE AMS4773F-1999 Silver Alloy, Brazing Filler Metal 60Ag 30Cu 10Sn 1115 to 1325 °F (602 to 718°C) Solidus-Liquidus Range
  • SAE AMS4767F-1999 Silver Alloy, Brazing Filler Metal 92.5Ag 7.2Cu 0.22Li, 1435 to 1635°F (779 to 891°C) Solidus-Liquidus Range
  • SAE AMS4765E-1999 Silver Alloy, Brazing Filler Metal 56Ag 42Cu 2.0Ni 1420 to 1640 °F (771 to 893°C) Solidus-Liquidus Range
  • SAE AMS4765F-2015 Silver Alloy@ Brazing Filler Metal 56Ag - 42Cu - 2.0Ni 1420 to 1640 ��(771 to 893 �� Solidus-Liquidus Range (UNS P07560)
  • SAE AMS4782F-2005 Nickel Alloy, Brazing Filler Metal 71Ni 10Si 19Cr, 1975 to 2075°F (1080 to 1135°C) Solidus-Liquidus Range
  • SAE AMS4761A-1999 Silver Alloy Brazing Filler Metal 38Ag 32Cu 28Zn 2.0Sn 1200 to 1330°F (649 to 721°C) Solidus-Liquidus Range
  • SAE AMS4774F-1999 Silver Alloy, Brazing Filler Metal 63Ag 28.5Cu 6.0Sn 2.5Ni, 1275 to 1475°F (691 to 802°C) Solidus-Liquidus Range
  • SAE AMS4772J-1999 Silver Alloy, Brazing Filler Metal 54Ag 40Cu 5.0Zn 1.0Ni 1325 to 1575°F (718 to 857°C) Solidus-Liquidus Range
  • SAE AMS4763A-1999 Silver Alloy, Brazing Filler Metal 56Ag 22Cu 17Zn 5.0Sn 1145 to 1205°F (618 to 652°C) Solidus-Liquidus Range
  • SAE AMS4761B-2015 Silver Alloy@ Brazing Filler Metal 38Ag �C 32Cu �C 28Zn �C 2.0Sn 1200 to 1330 ��(649 to 721 �� Solidus-Liquidus Range (UNS P07380)
  • SAE MAM4778C-2000 NICKEL ALLOY, BRAZING FILLER METAL 92Ni - 4.5Si - 3.1B 980 to 1040 °C Solidus-Liquidus Range
  • SAE AMS4778H-2006 Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range
  • SAE AMS4778G-2000 Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range
  • SAE MAM4778B-1994 NICKEL ALLOY, BRAZING FILLER METAL 92Ni - 4.5Si - 3.1B 980 to 1040 °C Solidus-Liquidus Range
  • SAE MAM4778A-1992 NICKEL ALLOY BRAZING FILLER METAL 92Ni - 4.5Si - 3.1B 980 to 1040 °C Solidus-Liquidus Range
  • SAE AMS4788A-1992 Silver Alloy Brazing Filler Metal 50Ag 28Zn 20Cu 2.0Ni 1220 to 1305°F (660 to 707°C) Solidus-Liquidus Range
  • SAE AMS4771H-1999 Silver Alloy, Brazing Filler Metal 50Ag 16Cd 15.5Zn 15.5Cu, 3.0Ni, 1170 to 1270°F (632 to 688°C) Solidus-Liquidus Range
  • SAE AMS4777G-2005 Nickel Alloy, Brazing Filler Metal 82Ni 4.5Si 7.0Cr 3.1B 3.0Fe, 1780 to 1830°F (971 to 999°C) Solidus-Liquidus Range
  • SAE MAM4778-1989 BRAZING FILLER METAL, NICKEL ALLOY 92Ni - 4.5Si - 3.1B 980° - 1040°C Solidus-Liquidus Range
  • SAE AMS4775H-2005 Nickel Alloy, Brazing Filler Metal 73Ni 0.75C 4.5Si 14Cr 3.1B 4.5Fe, 1790 to 1970°F (977 to 1077°C) Solidus-Liquidus Range
  • SAE AMS4779L-2022 Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 °F (982 °C) Solidus, 1950 °F (1066 °C) Liquidus
  • SAE AMS4782H-2022 Nickel Alloy, Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 °F (1080 °C) Solidus, 2075 °F (1135 °C) Liquidus
  • SAE AMS4777H-2010 Nickel Alloy, Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 to 1830 °F (971 to 999 °C) Solidus-Liquidus Range. (UNS N99620)
  • SAE AMS4785H-2009 Gold-Palladium-Nickel Alloy Brazing Filler Metal, High Temperature, 30Au 34Pd 36Ni, 2075 to 2130°F (1135 to 1166°C) Solidus-Liquidus Range
  • SAE AMS4776G-2005 Nickel Alloy, Brazing Filler Metal 73Ni 4.5Si 14Cr 3.1B 4.5Fe (Low Carbon) 1790 to 1970°F (977 to 1077°C) Solidus-Liquidus Range
  • SAE AMS4778J-2012 Nickel Alloy Brazing Filler Metal 92Ni 4.5Si 3.1B, 1800 to 1900°F Solidus-Liquidus Range
  • SAE AMS4775J-2010 Nickel Alloy, Brazing Filler Metal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790 to 1970 Degrees F (977 to 1077 Degrees C) Solidus-Liquidus Range (UNS N99600)
  • SAE AMS4786H-2009 Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature, 70Au 8.0Pd 22Ni, 1845 to 1915°F (1007 to 1046°C) Solidus-Liquidus Range
  • SAE AMS4787F-2008 Gold-Nickel Alloy, Brazing Filler Metal, High Temperature 82Au - 18Ni 1740 °F (949 °C) Solidus-Liquidus Temperature
  • SAE AMS4779F-2000 Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 to 1950 °F (982 to 1066 °C) Solidus-Liquidus Range
  • SAE AMS4782E-2000 Nickel Alloy, Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 to 2075 °F (1080 to 1135 °C) Solidus-Liquidus Range
  • SAE AMS4779G-2012 Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 to 1950 °F (982 to 1066 °C) Solidus-Liquidus Range
  • SAE AMS4782F-2012 Nickel Alloy, Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 to 2075 °F (1080 to 1135 °C) Solidus-Liquidus Range
  • SAE AMS4787H-2022 Gold-Nickel Alloy, Brazing Filler Metal, High Temperature 82Au - 18Ni 1740 °F (949 °C) Solidus-Liquidus Temperature
  • SAE AMS4786F-2001 Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au - 8.0Pd - 22Ni 1845 to 1915 °F (1007 to 1046 °C) Solidus-Liquidus Range UNS P00700
  • SAE AMS4776H-2010 Nickel Alloy, Brazing Filler Metal 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon) 1790 to 1970 °F (977 to 1077 °C) Solidus-Liquidus Range (UNS N99610)
  • SAE AMS4784G-2012 Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 50Au - 25Pd - 25Ni 2015 to 2050 °F (1102 to 1121 °C) Solidus-Liquidus Range (UNS P00500)
  • SAE AMS4783F-2003 Cobalt Alloy, High Temperature Brazing Filler Metal 50Co 8.0Si 19Cr 17Ni 4.0W 0.80B 2050 to 2100°F (1121 TO 1149°C) Solidus-Liquidus Range
  • SAE AMS4763A-2009 Silver Alloy, Brazing Filler Metal 56Ag - 22Cu - 17Zn - 5.0Sn 1145 to 1205 °F (618 to 652 °C) Solidus-Liquidus Range
  • SAE AMS4768H-2009 Silver Alloy, Brazing Filler Metal 35Ag - 26Cu - 21Zn - 18Cd 1125 to 1295 °F (607 to 702 °C) Solidus-Liquidus Range
  • SAE AMS4761A-2009 Silver Alloy, Brazing Filler Metal 38Ag - 32Cu - 28Zn - 2.0Sn 1200 to 1330 °F (649 to 721 °C) Solidus-Liquidus Range
  • SAE AMS4769F-2009 Silver Alloy, Brazing Filler Metal 45Ag - 24Cd - 16Zn - 15Cu 1125 to 1145 °F (607 to 618 °C) Solidus-Liquidus Range
  • SAE AMS4780E-2007 Manganese Alloy, Brazing Filler Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 °F (966 to 1024 °C) Solidus-Liquidus Range
  • SAE AMS4763C-2023 Silver Alloy, Brazing Filler Metal 56Ag - 22Cu - 17Zn - 5.0Sn 1145 to 1205 °F (618 to 652 °C) Solidus-Liquidus Range
  • SAE AMS4768J-2015 Silver Alloy, Brazing Filler Metal 35Ag - 26Cu - 21Zn - 18Cd 1125 to 1295 °F (607 to 702 °C) Solidus-Liquidus Range
  • SAE AMS4771H-2009 Silver Alloy, Brazing Filler Metal 50Ag - 16Cd - 15.5Zn - 15.5Cu - 3.0Ni 1170 to 1270 °F (632 to 688 °C) Solidus-Liquidus Range
  • SAE AMS4771J-2015 Silver Alloy, Brazing Filler Metal 50Ag - 16Cd - 15.5Zn - 15.5Cu - 3.0Ni 1170 to 1270 °F (632 to 688 °C) Solidus-Liquidus Range
  • SAE AMS4770K-2009 Silver Alloy Brazing Filler Metal 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160 to 1175 °F (627 to 635 °C) Solidus-Liquidus Range
  • SAE AMS4788A-2009 Silver Alloy Brazing Filler Metal 50Ag - 28Zn - 20Cu - 2.0Ni 1220 to 1305 °F (660 to 707 °C) Solidus-Liquidus Range
  • SAE AMS4770L-2015 Silver Alloy Brazing Filler Metal 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160 to 1175 °F (627 to 635 °C) Solidus-Liquidus Range

Guangdong Provincial Standard of the People's Republic of China, Liquid and solid phase detection

  • DB44/T 1153-2013 Water Quality Determination of Benazone, Atrazine and 2,4-D by Solid Phase Extraction-High Performance Liquid Chromatography
  • DB44/T 2016-2017 Determination of six environmental estrogenic compounds in water by solid-phase extraction-high performance liquid chromatography-tandem mass spectrometry
  • DB44/T 1356-2014 Testing method for relative density of sand filling

Professional Standard - Agriculture, Liquid and solid phase detection

Military Standard of the People's Republic of China-General Armament Department, Liquid and solid phase detection

  • GJB 1187A-2019 Radiographic testing
  • GJB 9547-2018 High-energy X-ray photography detection method of large solid rocket motor combustion chamber

Professional Standard - Commodity Inspection, Liquid and solid phase detection

  • SN/T 1499-2004 Determination of kojic acid in cosmetics-Liquid chromatography
  • SN/T 1475-2004 Determination of arbutin in cosmetics liquid chromatography
  • SN/T 1500-2004 Determination of glycyrrhizic acid dipotassium in cosmetics-Liquid chromatography
  • SN/T 3822-2014 Determination of bisphenol A in cosmetics for export.Liquid chromatography with fluorescence detection
  • SN/T 4252-2015 Determination of imidocarb residues in foodstuffs of animal origin for export.HPLC method and LC-MS/MS method
  • SN/T 1974-2007 Determination of methylene blue residues in aquatic product for import and export.LC-MS/MS and HPLC method
  • SN/T 2426-2010 Determination of citrinin contents in cereals for import and export-HPLC method
  • SN/T 3848-2014 Determination method of tea polyphenol residues in foods for export.HPLC method
  • SN/T 2534-2010 Determination of patulin in fruit and vegetable products for import and export-LC-MS/MS and HPLC method
  • SN/T 0931-2013 Determination of prohexadione-calcium residues in cereals for export.LC method
  • SN/T 4113-2015 Determination of acetophenon in plastic and plastic products.High performance liquid chromatography
  • SN/T 2331-2009 Raw material of textiles.Determination of sugar contents in cotton.High performance liquid chromatography (HPLC) method
  • SN/T 2483-2010 Determination of sterigmatocystin contents in cereals for import and export-HPLC method
  • SN/T 1971-2007 Determination of indoxacarb residues in food for import and export.GC and LC-MS/MS methods
  • SN 0535-1996 Method for the determination of gossypol in fodders for export.Liquid chromatographic method
  • SN/T 2012-2007 Determination of benzoic acid and sorbic acid in vinegar for export and import.Liquid chromatography
  • SN/T 1498-2004 Determination of magnesium L-ascorbyl-2-phosphate in cosmetics-Liquid chromatography
  • SN/T 2212-2008 Determination of bensulfuron methyl residues in cereals for import and export.Liquid chromatography
  • SN/T 1866-2007 Determination of imazosulfuron residue in cereals for import and export.Liquid chromatography
  • SN/T 3906-2014 Determination of kelevan in textiles for import and export.Liquid chromatography-tandem mass spectrometry method

British Standards Institution (BSI), Liquid and solid phase detection

  • BS EN ISO 11369:1997 Water quality. Determination of selected plant treatment agents. Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • 20/30410986 DC BS EN 17503. Environmental solid matrices. Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
  • BS EN ISO 17993:2003 Water quality. Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction
  • BS EN ISO 17993:2002 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction
  • BS ISO 11916-1:2013 Soil quality. Determination of selected explosives and related compounds. Method using high-performance liquid chromatography (HPLC) with ultraviolet detection
  • 22/30421191 DC BS IEC 62321-13 ED1. Determination of certain substances in electrotechnical products - Part 13. Bisphenol A in plastics by liquid chromatography-diode array detection (LC-DAD), liquid chromatography-mass spectrometry (LCMS) and liquid…
  • BS ISO 7981-2:2005 Water quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Determination of six PAH by high-performance liquid chromatography with fluorescence detection after liquid-liquid extraction
  • BS ISO 13875:2005 Liquid milk - Determination of acid-soluble -lactoglobulin content - Reverse-phase HPLC method
  • BS EN 16423:2013 Liquefied petroleum gases. Determination of dissolved residue. Gas chromatographic method using liquid, on-column injection
  • BS EN 12679:2000 Non-destructive testing - Determination of the size of industrial radiographic sources - Radiographic method
  • BS ISO 16308:2014 Water quality. Determination of glyphosate and AMPA. Method using high performance liquid chromatography (HPLC) with tandem mass spectrometric detection
  • BS EN 17411:2020 Fertilizers. Determination of perchlorate in mineral fertilizers by liquid chromatography and tandem mass spectrometry detection (LC-MS/MS)
  • BS ISO 19563:2017 Determination of theanine in tea and instant tea in solid form using high-performance liquid chromatography

海关总署, Liquid and solid phase detection

  • SN/T 2012-2019 Detection method of benzoic acid and sorbic acid in exported vinegar by liquid chromatography and liquid chromatography-mass spectrometry
  • SN/T 5223-2019 Determination of 18 free amino acids in honey by high performance liquid chromatography-fluorescence detection method

国家质量监督检验检疫总局, Liquid and solid phase detection

  • SN/T 4906-2017 Determination of alkylphenol disulfide in rubber by liquid chromatography-ultraviolet detection method
  • SN/T 4450-2016 Liquid chromatography method for detection of 9 restricted dyes in plastic and PVC shoe materials
  • SN/T 4799-2017 Detection method for animal tuberculosis pathogens Denaturing high performance liquid chromatography
  • SN/T 4852-2017 Evaluation Guide for Solid Phase Extraction Columns for Food Testing Polymer Ion Exchange Columns

Lithuanian Standards Office , Liquid and solid phase detection

  • LST EN ISO 17495:2004 Water quality - Determination of selected nitrophenols - Method by solid-phase extraction and gas chromatography with mass spectrometric detection (ISO 17495:2001)
  • LST EN ISO 11369:2000 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997)
  • LST EN 15890-2010 Foodstuffs - Determination of patulin in fruit juice and fruit based purée for infants and young children - HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection
  • LST EN 16162-2012 Animal feeding stuffs - Determination of decoquinate by HPLC with fluorescence detection

AENOR, Liquid and solid phase detection

  • UNE-EN ISO 17495:2003 Water quality - Determination of selected nitrophenols - Method by solid-phase extraction and gas chromatography with mass spectrometric detection (ISO 17495:2001)
  • UNE-EN 15890:2011 Foodstuffs - Determination of patulin in fruit juice and fruit based purée for infants and young children - HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection
  • UNE-EN 16162:2012 Animal feeding stuffs - Determination of decoquinate by HPLC with fluorescence detection
  • UNE-EN ISO 11369:1998 WATER QUALITY. DETERMINATION OF SELECTED PLANT TREATMENT AGENTS. METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY WITH UV DETECTION AFTER SOLID-LIQUID EXTRACTION. (ISO 11369:1997).

SAE - SAE International, Liquid and solid phase detection

  • SAE AMS4787G-2017 Gold-Nickel Alloy, Brazing Filler Metal, High Temperature, 82Au 18Ni, 1740°F (949°C) Solidus-Liquidus Temperature
  • SAE AMS4787C-1990 BRAZING FILLER METAL@ HIGH TEMPERATURE 82Au - 18Ni 1740°F (949°C) Solidus-Liquidus Temperature (UNS P00820)
  • SAE AMS4764A-1978 BRAZING FILLER METAL@ COPPER 52.5Cu - 38Mn - 9.5Ni 1615° - 1700°F (880° - 925°C) Solidus-Liquidus Range
  • SAE AMS4779B-1981 Brazing Filler Metal@ Nickel 94Ni - 3.5Si - 1.8B 1800° - 1950°F (980° - 1065°C) Solidus-Liquidus Range
  • SAE AMS4779A-1978 Brazing Filler Metal@ Nickel 94Ni - 3.5Si - 1.8B 1800° - 1950°F (980° - 1065°C) Solidus-Liquidus Range
  • SAE AMS4764B-1984 BRAZING FILLER METAL@ COPPER 52.5Cu - 38Mn - 9.5Ni 1615° - 1700°F (880° - 925°C) Solidus-Liquidus Range
  • SAE AMS4778F-1994 NICKEL ALLOY@ BRAZING FILLER METAL 92Ni - 4.5Si - 3.1B 1800 to 1900 degrees Solidus-Liquidus Range (UNS N99630)
  • SAE AMS4782A-1978 Brazing Filler Metal@ Nickel 71Ni - 10Si - 19Cr 1975° - 2075°F (1080° - 1135°C) Solidus-Liquidus Range
  • SAE AMS4777A-1978 Brazing Filler Metal@ Nickel 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780° - 1830°F (970° - 1000°C) Solidus-Liquidus Range
  • SAE AMS4787A-1978 BRAZING FILLER METAL@ HIGH TEMPERATURE 82Au - 18Ni 1740°F (950°C) Solidus-Liquidus Temperature (UNS P00820)
  • SAE AMS4787B-1984 BRAZING FILLER METAL@ HIGH TEMPERATURE 82Au - 18Ni@ 1740°F (950°C) Solidus-Liquidus Temperature (UNS P00820)
  • SAE AMS4777B-1981 Brazing Filler Metal@ Nickel 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780° - 1830°F (970° - 1000°C) Solidus-Liquidus Range
  • SAE AMS4766D-1984 BRAZING FILLER METAL@ SILVER 85Ag - 15Mn 1760° - 1780°F (960° to 970°C) Solidus-Liquidus Range (UNS P07850)
  • SAE AMS4773D-1991 BRAZING FILLER METAL@ SILVER 60Ag - 30Cu – 10Sn 1115° - 1325°F (602° - 718°C) Solidus-Liquidus Range (UNS P07600)
  • SAE AMS4778D-1989 Brazing Filler Metal@ Nickel Alloy 92Ni - 4.5Si - 3.1B 1800° to 1900 °F Solidus-Liquidus Range (UNS N99630)
  • SAE AMS4767B-1978 Brazing Filler Metal@ Silver 92.5Ag - 7.2Cu - 0.22Li 1435° - 1635° F (780° - 890°C) Solidus-Liquidus Range (UNS P07925)
  • SAE AMS4766E-1991 BRAZING FILLER METAL@ SILVER 85Ag - 15Mn 1760° - 1780°F (960° to 970°C) Solidus-Liquidus Range (UNS P07850)
  • SAE AMS4766C-1978 BRAZING FILLER METAL@ SILVER 85Ag - 15Mn 1760° - 1780°F (960° to 970°C) Solidus-Liquidus Range (UNS P07850)
  • SAE AMS4773C-1984 BRAZING FILLER METAL@ SILVER 60Ag - 30Cu – 10Sn 1115° - 1325°F (600° - 720°C) Solidus-Liquidus Range (UNS P07600)
  • SAE AMS4767C-1984 Brazing Filler Metal@ Silver 92.5Ag - 7.2Cu - 0.22Li 1435° - 1635° F (780° - 890°C) Solidus-Liquidus Range (UNS P07925)
  • SAE AMS4773B-1978 BRAZING FILLER METAL@ SILVER 60Ag - 30Cu – 10Sn 1115° - 1325°F (600° - 720°C) Solidus-Liquidus Range (UNS P07600)
  • SAE AMS4785B-1984 BRAZING FILLER METAL@ HIGH TEMPERATURE 30Au - 34Pd - 36Ni 2075° - 2130°F (1135° - 1165°C) Solidus-Liquidus Range (UNS P00300)
  • SAE AMS4782B-1985 Brazing Filler Metal@ Nickel 71Ni - 10Si - 19Cr 1975° to 2075°F (1080° - 1135°C) Solidus-Liquidus Range (UNS N99650)
  • SAE AMS4785C-1990 BRAZING FILLER METAL@ HIGH TEMPERATURE 30Au - 34Pd - 36Ni 2075° - 2130°F (1135° - 1166°C) Solidus-Liquidus Range (UNS P00300)
  • SAE AMS4775C-1981 Brazing Filler Metal@ Nickel 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790° - 1970° F (975° to 1075°C) Solidus-Liquidus Range
  • SAE AMS4786B-1984 BRAZING FILLER METAL@ HIGH TEMPERATURE 70Au - 8.0Pd - 22Ni 1845° - 1915°F (1005° - 1045°C) Solidus-Liquidus Range (UNS P00700)
  • SAE AMS4786C-1990 BRAZING FILLER METAL@ HIGH TEMPERATURE 70Au - 8.0Pd - 22Ni 1845° - 1915° F (1007° - 1046° C) Solidus-Liquidus Range (UNS P00700)
  • SAE AMS4775B-1978 Brazing Filler Metal@ Nickel 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790° - 1970°F (975° - 1075°C) Solidus-Liquidus Range
  • SAE AMS4770G-1984 BRAZING FILLER METAL@ SILVER 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160° - 1175°F (625° - 635°C) Solidus -Liquidus Range (UNS P07500)
  • SAE AMS4770F-1978 BRAZING FILLER METAL@ SILVER 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160° - 1175°F (625° - 635°C) Solidus -Liquidus Range (UNS P07500)
  • SAE AMS4769B-1978 Brazing Filler Metal@ Silver 45Ag - 24Cd - 16Zn - 15Cu 1125° - 1145°F (605° - 620°C) Solidus-Liquidus Range (UNS P07450)
  • SAE AMS4769C-1984 Brazing Filler Metal@ Silver 45Ag - 24Cd - 16Zn - 15Cu 1125° - 1145°F (605° - 620°C) Solidus-Liquidus Range (UNS P07450)
  • SAE AMS4774C-1984 BRAZING FILLER METAL@ SILVER 63Ag – 28.5Cu – 6.0Sn - 2.5Ni 1275° - 1475°F (690° - 800°C) Solidus-Liquidus Range (UNS P07630)
  • SAE AMS4774B-1978 BRAZING FILLER METAL@ SILVER 63Ag – 28.5Cu – 6.0Sn - 2.5Ni 1275° - 1475°F (690° - 800°C) Solidus-Liquidus Range (UNS P07630)
  • SAE AMS4782G-2017 Nickel Alloy@ Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 °F (1080 °C) Solidus@ 2075 °F (1135 °C) Liquidus (UNS N99650)
  • SAE AMS4778E-1992 Nickel Alloy Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range (UNS N99630)
  • SAE AMS4779K-2018 Nickel Alloy@ Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 °F (982 °C) Solidus@ 1950 °F (1066 °C) Liquidus (UNS N99640)
  • SAE AMS4779J-2017 Nickel Alloy@ Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 °F (982 °C) Solidus@ 1950 °F (1066 °C) Liquidus (UNS N99640)
  • SAE AMS4784B-1984 BRAZING FILLER METAL@ HIGH TEMPERATURE 50Au - 25Pd - 25Ni@ 2015° - 2050°F (1100° to 1120 °C) Solidus-Liquidus Range (UNS P00500)
  • SAE AMS4783A-1978 Brazing Filler Metal@ High Temperature 50Co - 8.0Si - 19Cr - 17Ni - 4.0W - 0.80B 2050° - 2100°F (1120° - 1150°C) Solidus-Liquidus Range
  • SAE AMS4783B-1985 Brazing Filler Metal@ High Temperature 50Co - 8.0Si - 19Cr - 17Ni - 4.0W - 0.80B 2050° - 2100°F (1120° - 1150°C) Solidus-Liquidus Range
  • SAE AMS4776B-1981 Brazing Filler Metal@ Nickel 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon) 1790° - 1970°F (975° - 1075°C) Solidus-Liquidus Range
  • SAE AMS4776A-1978 Brazing Filler Metal@ Nickel 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon) 1790° - 1970°F (975° - 1075°C) Solidus-Liquidus Range
  • SAE AMS4771E-1984 Brazing Filler Metal@ Silver 50Ag - 16Cd - 15.5Zn - 15.5Cu - 3.0Ni 1170° - 1270°F (630° - 690°C) Solidus-Liquidus Range (UNS P07501)
  • SAE AMS4778L-2019 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range (UNS N99630)
  • SAE MAM4778D-2003 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 980 to 1040 °C Solidus-Liquidus Range (UNS N99630)
  • SAE AMS4784C-1990 BRAZING FILLER METAL@ HIGH TEMPERATURE 50Au - 25Pd - 25Ni@ 2015° - 2050°F (1102° - 1121°C) Solidus-Liquidus Range (UNS P00500)
  • SAE AMS4773G-2016 Silver Alloy@ Brazing Filler Metal 60Ag – 30Cu – 10Sn 1115 to 1325 °F (602 to 718 °C) Solidus-Liquidus Range (UNS P07600)
  • SAE AMS4787D-1992 Gold-Nickel Alloy Brazing Filler Metal@ High Temperature 82Au - 18Ni 1740 Degrees F (949 Degrees C) Solidus- Liquidus Temperature
  • SAE AMS4778G-1995 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 Degrees F Solidus-Liquidus Range (UNS N99630)
  • SAE MAM4778C-1995 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 980 to 1040 Degrees C Solidus- Liquidus Range (UNS N99630)
  • SAE AMS4782D-1994 Nickel Alloy@ Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 to 2075 °F (1080 to 1135 °C) Solidus-Liquidus Range (UNS N99650)
  • SAE AMS4765C-1991 Filler Metal@ Silver@ Brazing 56Ag - 42Cu - 2.0Ni 1420° to 1640° F (771° to 893°C) Solidus-Liquidus Range (UNS P07560)
  • SAE AMS2663A-1992 SILVER ALLOY BRAZING FILLER METAL 56AG - 22CU - 17ZN - 5.0SN 1152 - 1203 DEGREES F (622 - 651 DEGREES C) SOLIDUS-LIQUIDUS RANGE (UNS P07563)
  • SAE AMS4789-1992 SILVER ALLOY BRAZING FILLER METAL 56Ag - 22Cu - 17Zn - 5.0Sn 1152 to 1205 °F (618 to 652°C) Solidus-Liquidus Range (UNS P07563)
  • SAE AMS4780G-2018 Manganese Alloy@ Brazing Filler Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 °F (966 to 1024 °C) Solidus-Liquidus Range (UNS M26800)
  • SAE AMS4789A-1993 SILVER ALLOY BRAZING FILLER METAL 56AG - 22CU - 17ZN - 5.0SN 1152 TO 1205 DEGREES F (618 TO 652 DEGREES C) SOLIDUS-LIQUIDUS RANGE

Agricultural Standard of the People's Republic of China, Liquid and solid phase detection

UNKNOWN, Liquid and solid phase detection

  • GB/T 32211-2015 Test Method for Variable Wavelength Photometric Detectors for Liquid Chromatography
  • GB/T 32211-2015 Test Method for Variable Wavelength Photometric Detectors for Liquid Chromatography

ZA-SANS, Liquid and solid phase detection

  • SANS 17495:2002 Water quality - Determination of selected nitrophenols - Method by solid-phase extraction and gas chromatography with mass spectrometric detection

Jiangsu Provincial Food Standard of the People's Republic of China, Liquid and solid phase detection

  • DBS32/ 012-2016 High-performance liquid chromatography, liquid chromatography-mass spectrometry/mass spectrometry for the detection of quinoline yellow in local food safety standards

BR-ABNT, Liquid and solid phase detection

Chongqing Provincial Food Standard of the People's Republic of China, Liquid and solid phase detection

  • DBS50/ 015-2013 High performance liquid chromatography for the detection of red powder in food

农业农村部, Liquid and solid phase detection

  • NY/T 3876-2021 Determination of carrageenan in pork by liquid chromatography-tandem mass spectrometry
  • NY/T 3904-2021 Detection of heterocyclic amines in meat and meat products by liquid chromatography-tandem mass spectrometry

Professional Standard - Chemical Industry, Liquid and solid phase detection

  • HG/T 3500-2011 Chemical reagent.Test method for polarity constant of liquid stationary phase in gas chromatography
  • HG/T 3500-1982 Method for Determination of Polarity Constant of Chemical Reagent Gas Chromatography Stationary Liquid
  • HG/T 2414-2007 Photographic chemicals.The method for the determination of the color couples.Reversed phase high performance liquid chromatography
  • HG/T 2414-1993 Determination of Coupler Content in Photographic Chemicals - Reversed-Phase High Performance Liquid Chromatography
  • HG/T 2535-2007 Photographic chemicals.The method for the determination of sensitization dyes.Reversed phase high performance liquid chromatography
  • HG/T 2535-1993 Determination of sensitizing dye content in photographic chemicals by reversed-phase high-performance liquid chromatography

Professional Standard - Non-ferrous Metal, Liquid and solid phase detection

  • YS/T 533-2006 Method for Determination of Solid-Liquidus Temperature Range of Self-fluxing Alloy Powder

Shaanxi Provincial Standard of the People's Republic of China, Liquid and solid phase detection

  • DB61/T 967-2015 Determination of Benzo[a]pyrene in Vegetable Oil by Liquid Chromatography-Fluorescence Detection

AT-ON, Liquid and solid phase detection

  • ONORM M 6623-1994 Water analysis - Determination of phenoxyalkyl carbonic acids by gas chromatography and mass-spectrometric detection after solid-liquid-extraction and derivatization

国家市场监督管理总局、中国国家标准化管理委员会, Liquid and solid phase detection

  • GB/T 5677-2018 Castings—Radiographic testing
  • GB/T 40833-2021 Determination of p-coumaric acid in sugarcane rinds—High performance liquid chromatography method
  • GB/T 38571-2020 Determination of alkaloids as plant secondary metabolites—Liquid chromatography-mass spectrometry
  • GB/T 40643-2021 Determination of hyperoside in extract of crataegus pinnatifida leaf—HPLC
  • GB/T 40644-2021 Determination of geniposidic acid in extract of eucommia ulmoides oliver leaf—HPLC
  • GB/T 39824-2021 Determination of relative strength of dyes in solution
  • GB/T 40734-2021 Non-destructive testing of welds—Phased array ultrasonic testing(PAUT)—Acceptance levels
  • GB/T 41114-2021 Non-destructive testing—Ultrasonic testing—Specification for a calibration block for phased array testing(PAUT)

司法部, Liquid and solid phase detection

  • SF/T 0113-2021 Gas chromatography-mass spectrometry and gas chromatography test methods for cyanide in blood

Professional Standard - Civil Aviation, Liquid and solid phase detection

  • MH/T 3009-2012 Nondestructive testing for aircraft.Radiographic testing

中华人民共和国国家卫生和计划生育委员会, Liquid and solid phase detection

  • WS/T 98-1996 Urine.Determination of creatinine.Reversed-phase high performance liquid chromatographic method

卫生健康委员会, Liquid and solid phase detection

Indonesia Standards, Liquid and solid phase detection

  • SNI 19-4956-1998 Test method for relative density, specific gravity and density (of homogeneous liquid)

Fujian Provincial Standard of the People's Republic of China, Liquid and solid phase detection

  • DB35/T 896-2009 Determination of Basic Rose T in Food by Liquid Chromatography-Fluorescence Detection

Hebei Provincial Standard of the People's Republic of China, Liquid and solid phase detection

  • DB13/T 5222-2020 Determination of Purity of Nematic Thermotropic Liquid Crystal Monomer by Gas Chromatography

YU-JUS, Liquid and solid phase detection

  • JUS C.A7.091-1985 Non-destructive testing. Metallographic replica technigues ofsurface examination

IN-BIS, Liquid and solid phase detection

Henan Provincial Standard of the People's Republic of China, Liquid and solid phase detection

  • DB41/T 1887-2019 Specification for supervision and inspection of installation of organic heat carrier liquid phase furnace

Shanxi Provincial Standard of the People's Republic of China, Liquid and solid phase detection

  • DB14/T 1948-2019 Determination of Halogenated Hydrocarbons in Water Quality Headspace/Solid Phase Microextraction-Gas Chromatography
  • DB14/T 1949-2019 Determination of Soil Halogenated Hydrocarbons Headspace/Solid Phase Microextraction-Gas Chromatography

CEN - European Committee for Standardization, Liquid and solid phase detection

  • EN ISO 15302:2007 Animal and vegetable fats and oils - Determination of benzo[a]pyrene content - Reverse-phase high-performance liquid chromatography method

Guangxi Provincial Standard of the People's Republic of China, Liquid and solid phase detection

  • DB45/T 781-2011 Determination of the content of arcinine in Jigucao by high performance liquid chromatography

International Dairy Federation (IDF), Liquid and solid phase detection

  • IDF/RM 217-2009 Cheese - Determination of nisin A content by LC-MS and LC-MS-MS

Tianjin Provincial Standard of the People's Republic of China, Liquid and solid phase detection

  • DB12/T 952-2020 Detection method of antibiotic residues in pig manure by liquid chromatography-mass spectrometry/mass spectrometry

ES-UNE, Liquid and solid phase detection

  • UNE-EN 12679:2019 Non-destructive testing - Radiographic testing - Determination of the size of industrial radiographic gamma sources
  • UNE-EN ISO 15302:2017 Animal and vegetable fats and oils - Determination of benzo[a]pyrene - Reverse-phase high performance liquid chromatography method (ISO 15302:2017)

CZ-CSN, Liquid and solid phase detection

  • CSN 75 7554-1998 Water quality - Determination of selected polynuclear aromatic hydrocarbons (PAH) - HPLC (FLD) and GC (MSD) methods

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Liquid and solid phase detection

  • PREN 3877-1993 Aerospace Series Test Method for Braze Alloys Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis

Professional Standard - Petrochemical Industry, Liquid and solid phase detection

  • SH/T 0806-2008 Determination of aromatic hydrocarbon types in middle distillates.High performance liquid chromatography method with refractive index detection

  solid phase liquid extraction, liquid chromatography solid phase extraction, solid phase liquid phase, solid phase extraction liquid phase extraction, liquid phase extraction solid phase, Solid phase detection and liquid phase detection, Solid phase detection Liquid phase detection, Solid phase detection, HPLC solid-liquid, solid liquid gas phase, solid-liquid extraction, Solder solid phase liquid phase, Liquid and solid phase detection, Solid phase method Liquid phase method, solid phase - liquid phase, Solid phase method Liquid phase method, liquid phase solid phase?, Solid phase detection, solid phase liquid extraction, liquid-solid phase chromatography.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved