ZH
RU
ES

day tightness

day tightness, Total:306 items.

In the international standard classification, day tightness involves: Glass, Construction materials, Earthworks. Excavations. Foundation construction. Underground works, Fertilizers, Waxes, bituminous materials and other petroleum products, Raw materials for rubber and plastics, Tea. Coffee. Cocoa, Fasteners, Metrology and measurement in general, Structures of buildings, Wood, sawlogs and sawn timber, Products of the chemical industry, Paint ingredients, Quality, Road vehicles in general, Heat pumps, Refrigerating technology, Testing of metals, Materials for aerospace construction, Vocabularies, Open systems interconnection (OSI), Test conditions and procedures in general, Pipeline components and pipelines, Components for aerospace construction, Radiocommunications, Astronomy. Geodesy. Geography, Iron and steel products, Headgear. Clothing accessories. Fastening of clothing, Medical equipment, Optics and optical measurements, Road engineering, Jewellery, Linear and angular measurements, Mechanical testing, Organic chemicals, Air quality, Adhesives, Fruits. Vegetables, Aerospace electric equipment and systems, Electrical accessories, Products of the textile industry, Soil quality. Pedology, Refractories, Acoustics and acoustic measurements, Electromechanical components for electronic and telecommunications equipment, Fasteners for aerospace construction, Equipment for the chemical industry, External sewage systems, Photography.

PT-IPQ, day tightness

E 197-1966
NP 2993/1-1985
NP EN 524-6-2000 Steel strip sheaths for prestressing tendons Test methods Part6:Determination of leaktightness(determination of water loss)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, day tightness

GB/T 5432-1985 The density of daily use glass--Test method
GB/T 18798.5-2013 Instant tea.Part 5:Methods for determination of free-flow and compacted bulk densities
GB/T 21877-2015 Dyestuffs and intermediate of dyes.Determination of tapping density
GB/T 21877-2008 Dyestuffs and intermediate of dyes.Determination of tapping density
GB/T 6379.3-2012 Accuracy(trueness and precision) of measurement methods and results.Part 3:Intermediate measures of the precision of a standard measurement method
GB/T 6379-1986 Precision of test methods--Determination of repeatability and reproducibility for a standard test method by interlaboratory tests

CZ-CSN, day tightness

CSN ISO 4111:1994 Fresh concrete.Determination of the consistency.Degree of compactibility(Compaction index)
CSN 73 1315-1989 Determination of volume mass, den- sity, compactness and porosity of concrete
CSN 77 3003-1989 Aerosol containers and aerosol valves. Determination of compactness of anticorrosive coating

(U.S.) Ford Automotive Standards, day tightness

FORD ESF-M4G157-A-1978 SEALER, LOCKING - HIGH STRENGTH - HIGH VISCOSITY
FORD FLTM BV 012-1-2000 TEST FOR LOCKING STRENGTH OF SEALERS

Association Francaise de Normalisation, day tightness

NF P84-515:1998 Geomembranes. Measurement of the conventional tightness level of geomembranes.
NF EN ISO 14130:1998 Composites plastiques renforcés de fibres - Détermination de la résistance au cisaillement interlaminaire apparent par essai de flexion sur appuis rapprochés
NF T42-015*NF ISO 705:2016 Rubber latex - Determination of density between 5oC and 40 oC
NF T42-015:1997 Rubber latex. Determination of density between 5 degrees Celsius and 40 degrees Celsius.
NF EN 14831:2005 Éléments de fixation - Aptitude au serrage - Méthode d'essai simplifiée Couple/Angle
NF EN 12350-4:2019 Essais pour béton frais - Partie 4 : indice de serrage
NF ISO 705:2016 Latex de caoutchouc - Détermination de la masse volumique entre 5 oC et 40 oC
NF EN 15586:2008 Textiles - Méthodes d'essai des tissus pour l'étanchéité aux fibres : essai par frottement
NF EN 658-5:2003 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à température ambiante - Partie 5 : détermination de la résistance au cisaillement interlaminaire par essai de flexion sur appuis rapprochés (trois points)
NF P21-313*NF EN ISO 8970:2020 Timber structures - Testing of joints made with mechanical fasteners - Requirements for timber density
NF S11-555:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin.
NF T47-105*NF ISO 3870:2009 Conveyor belts (fabric carcass), with length between pulley centres up to 300 m, for loose bulk materials - Adjustment of take-up device
NF X43-050:1996 Air quality. Determination of the asbestos fiber concentration by transmission electron microscopy. Indirect method.
NF P78-470:2015 Glass in building - Calculation of the temperatures of components and the forces in seals for insulating glass units without solar protection
NF L54-175-002*NF EN 3545-002:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 oC to 175 oC - Part 002 : Specification of performance and contact arrangements
NF EN 1097-3:1998 Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 3 : méthode pour la détermination de la masse volumique en vrac et de la porosité intergranulaire

ESDU - Engineering Sciences Data Unit, day tightness

ESDU 13003-2016 Modal density of acoustic spaces

HU-MSZT, day tightness

VN-TCVN, day tightness

TCVN 5088-1990 Instant tea.Determination of free-flow and compacted bulk densities
TCVN 7034-2002 Instant coffee.Determination of free-flow and compacted bulk densities
TCVN 6910-3-2001 Accuracy (Trueness and precision) of measurement methods and results.Part 3: Intermediate measures of the precision of a standard measurement method

AREMA - American Railway Engineering and Maintenance-of-Way Association, day tightness

CHAPTER 18-1997 Light Density and Short Line Railways (Current from August 1@ 1997 to July 31@ 1998; Volume 3/Infrastructure and Passenger)
CHAPTER 32/PART 4-1996 Project Scheduling Module (Current from August 1@ 1997 to July 31@ 1998; Volume 4/Systems Management)

GM Europe, day tightness

GME QK 001021-1984 Polyethylen mittlerer Dichte Polyethylene Middle Density German
GME STD 518660-1996 Cellular plastic 8660 PEX Foamed, crosslinked PELD with closed cells Cellplast 8660 PEX Skummad, tv鋜bunden PELD med slutna celler English/Swedish

RU-GOST R, day tightness

GOST EN 1237-2013 Fertilizers. Method for determination of bulk density (tapped)
GOST R ISO 705-2003 Rubber latex. Determination of density between 5 °C and 40 °C
GOST 26798.1-1996 Oil-well cement. Test methods
GOST 26798.1-1985 Oil-well cements. Test methods of flowability, density, water-el: mination, thickening time and setting time
GOST 25645.138-1986 Natural radiation belts of earth. Model of spatial and energy distribution of proton flux
GOST 14618.10-1978 Essential oils, aromatics and their intermediates. Methods for determination of density and refractive index
PNST 532-2021 Space systems. Carbon-carbon and ceramic matrix composites. Determination of apparent density and of open porosity

Illuminating Engineering Society of North America, day tightness

IESNA LM-83-2012 Approved Method: IES Spatial Daylight Autonomy (sDA) and Annual Sunlight Exposure (ASE)

轻工业部, day tightness

QB 1010-1991 Method for determination of true density of pigments for daily ceramic materials

International Organization for Standardization (ISO), day tightness

ISO 534:1988 Paper and board; determination of thickness and apparent bulk density or apparent sheet density
ISO 705:1994 Rubber latex - Determination of density between 5 °C and 40 °C
ISO 705:2015 Rubber latex - Determination of density between 5 degrees C and 40 degrees C
ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
ISO 8970:2010 Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density
ISO 8970:2020 Timber structures — Testing of joints made with mechanical fasteners — Requirements for timber density
ISO 8970:1989 Timber structures; testing of joints made with mechanical fasteners; requirements for wood density
ISO/PRF 5725-3 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies
ISO 5725-3:2023 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies
ISO 5725-3:1994/cor 1:2001 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method; Technical Corrigendum 1
ISO/IEC 17982:2012 Information technology - Telecommunications and information exchange between systems - Close Capacitive Coupling Communication Physical Layer (CCCC PHY)
ISO/IEC 17982:2021 Information technology -- Telecommunications and information exchange between systems -- Close capacitive coupling communication physical layer (CCCC PHY)
ISO 8448:1986 Pipework; Double overlap flexible metal hoses (unpacked, limited tightness, circular or polygonal section, in protected carbon steel)
ISO 8450:1986 Pipework; Single overlap flexible metal hoses (unpacked, no tightness, circular or polygonal section, in protected carbon steel)
ISO 10236:1995 Carbonaceous materials for the production of aluminium - Green coke and calcined coke for electrodes - Determination of bulk density (tapped)
ISO 8447:1986 Pipework; Single overlap flexible metal hoses (rubber packing, limited tightness, circular or polygonal section, in protected carbon steel)
ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
ISO 8449:1995 Pipework - Single overlap flexible metal hoses (with packing, limited tightness, circular or polygonal section, in protected carbon steel)
ISO/R 1903:1971
ISO 8444:1985 Pipework; Double overlap flexible metal hoses (copper packing, limited tightness, circular section, in protected carbon steel)

American Society for Testing and Materials (ASTM), day tightness

ASTM D2320-98(2017) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM E691-99 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-08 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D6752-02a Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-02 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM E2366-05 Standard Test Method for Measurement of Daytime Chromaticity of Pavement Marking Materials Using a Portable Reflection Colorimeter
ASTM G117-98 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
ASTM D861-01 Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns
ASTM D861-01a Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns
ASTM D861-95 Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns
ASTM D861-07(2018) Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns
ASTM D6780-02 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
ASTM D6780-05 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
ASTM E1130-08 Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
ASTM G117-02(2007) Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
ASTM G117-02 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
ASTM E691-09e1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM G117-13 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
ASTM F2510/F2510M-07 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
ASTM F2510/F2510M-07(2013) Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes

National Fire Protection Association (NFPA), day tightness

NFPA 350-2016 Guide for Safe Confined Space Entry and Work (Effective Date: 12/04/2015)
NFPA 1584-2015 Standard on the Rehabilitation Process for Members During Emergency Operations and Training Exercises (Effective Date: 12/01/2014)
NFPA 1584-2022 Standard on the Rehabilitation Process for Members During Emergency Operations and Training Exercises (Effective Date: 4/8/2021)

Korean Agency for Technology and Standards (KATS), day tightness

KS M ISO 705:2010 Rubber latex－Determination of density between 5 ℃ and 40 ℃
KS M ISO 705:2021 Rubber latex — Determination of density between 5 ℃ and 40 ℃
KS A ISO 5725-3-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 3：lntermediate measures of the precision of a standard measurement method
KS M ISO 6999-2003(2018)
KS A ISO 5725-3:2012 Accuracy(trueness and precision) of measurement methods and results－Part 3：lntermediate measures of the precision of a standard measurement method

British Standards Institution (BSI), day tightness

BS ISO 705:2015 Rubber latex. Determination of density between 5 C and 40 C
BS ISO 14903:2012 Refrigerating systems and heat pumps. Qualification of tightness of components and joints
22/30380920 DC BS ISO 5725-3. Accuracy (trueness and precision) of measurement methods and results - Part 3. Intermediate precision and alternative designs for collaborative studies
BS EN ISO 8970:2010 Timber structures. Testing of joints made with mechanical fasteners. Requirements for wood density
BS EN ISO 8970:2020 Tracked Changes. Timber structures. Testing of joints made with mechanical fasteners. Requirements for timber density
BS ISO/IEC 17982:2021 Information technology. Telecommunications and information exchange between systems. Close capacitive coupling communication physical layer (CCCC PHY)
BS ISO 5725-3:1995 Accuracy (trueness and precision) of measurement methods and results. Intermediate measures of the precision of a standard measurement method
BS ISO 14952-6:2003 Space systems. Surface cleanliness of fluid systems - Precision-cleaning processes
BS ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX). Effect of time and temperature on expected strength
18/30365218 DC BS EN ISO 8970. Timber structures. Testing of joints made with mechanical fasteners. Requirements for timber density
20/30405152 DC BS EN ISO/IEC 17982. Information technology. Telecommunications and information exchange between systems. Close Capacitive Coupling Communication Physical Layer (CCCC PHY)
BS EN 6025:2021 Aerospace series. Plates. Aluminium alloy 2024. Close tolerances flatness. Thickness. 6 mm = a = 55 mm. Dimensions
BS ISO 5725-3:2023 Accuracy (trueness and precision) of measurement methods and results. Intermediate precision and alternative designs for collaborative studies
BS EN 3545-001:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Technical specification
BS EN 3545-002:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 002: Specification of performance and contact arrangements
BS EN 3545-004:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Connectors with male contacts - Product standard
BS EN 3545-004:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ - Part 004: Connectors with male contacts - Product standard
BS EN 3545-009:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 009: Protective cover for plug and receptacle — Product standard

AIA/NAS - Aerospace Industries Association of America Inc., day tightness

NAS85-1946 Bolt-100 Degree Flush Head Close Tolerance (Rev 1)
NAS86-1946 Bolt-100 Degree Flush Head Close Tolerance 5/8-18 (Rev 1)
NAS1767-1990 Bolt@ Close Tolerance 100 Degree Reduced Head Dovetail Slot (Rev 2)
NAS1533-1992 Pin@ 100 Degree Csk. Head Hi-Shear Rivet@ Close Tolerance (Rev 1)
NAS82-1946 Bolt-100 Degree Flush Head Close Tolerance 3/8-24 (Rev 1)
NAS80-1946 Bolt-100 Degree Flush Head Close Tolerance 1/4-28 (Rev 1)
NAS83-1946 Bolt-100 Degree Flush Head Close Tolerance 7/16-20 (Rev 1)
NAS1583-1992 Pin@ 100 Degree Csk. Head Hi-Shear Rivet@ Close Tolerance@ 1200 Degrees F (Rev 1)
NAS9313-1997 Rivet@ Solid@ Close Tolerance@ 100 Degree@ Flush Head@ Aluminum Alloy@ Titanium-Columbium Alloy
NAS333-340-2000 Screw@ Shear@ 100 Degree Standard Flush Head@ Close Tolerance@ 95 KSI Fsu (Rev 14; FREARSON RECESS INACTIVE FOR NEW DESIGN AFTER 30 MARCH@ 1962)
NAS9314-1997 Rivet@ Solid@ Close Tolerance@ 100 Degrees@ Flush@ Reduced Shear Head@ Aluminum Alloy@ Titanium-Columbium Alloy
NAS4703-4716-1996 Bolt@ 100 Degree Reduced Head@ Tri-Slot Recess@ Close Tolerance@ Alloy Steel@ Short Thread Nonlocking (Rev 6)
NAS4400-4416-1998 Bolt@ 100 Deg. Head@ Tri-Slot Recess@ Close Tolerance@ Alloy Steel@ Short Thread@ Self-Locking and Nonlocking (REV 8)
NAS4903-4916-1996 Bolt@ 100 Degree Reduced Head@ Tri-Slot Recess@ Close Tolerance@ 6Al-4V Titanium Alloy@ Short Thread@ Nonlocking (Rev 5)
NA0042-1996 Screw@ Close Tolerance@ 100 Degree Flush Head@ Offset Cruciform Recess A-286 CRES 660 MPa Shear Metric (Rev 3)
NAS7600-7616-2013 BOLT@ 100 Degrees HEAD@ CRUCIFORM RECESS@ CLOSE TOLERANCE@ 6Al-4V TITANIUM ALLOY@ SHORT THREAD@ SELF-LOCKING AND NONLOCKING (Rev 7)
NAS4803-4816-1996 Bolt@ 100 Degree Reduced Head@ Tri-Slot Recess@ Close Tolerance@ A286 CRES@ Short Thread@ Nonlocking (Rev 5 ***BEST AVAILABLE COPY***)

AENOR, day tightness

UNE 88122:2005 Fibrecement roofing. Complements of tightness. Mastics
UNE-EN ISO 8970:2010 Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:2010)
UNE 82009-3:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 3: INTERMEDIATE MEASURES OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.

RO-ASRO, day tightness

STAS 2414-1972 TESTS OF CON'CRETE Determination of density, compaction and porosity of hardened concrete
STAS 1759-1988 Tests of concretes TESTS OF FRESH CONCRETE Determination of apparent density, consistance fine aggregates content and setting time

KR-KS, day tightness

KS M ISO 705-2021 Rubber latex — Determination of density between 5 ℃ and 40 ℃
KS M ISO 6999-2003(2023)

SE-SIS, day tightness

SIS 65 00 47-1960 Method for the determination of down and feather closeness in fabrics
SIS SS 02 71 10-1989 Geotechnical tests — Compaction properties — Field determination of density

ISUZU - Isuzu Motors Ltd., day tightness

ISC-F20-021A-2011 Tack-free Time of Adhesive and Sealing Material Test Procedure (Japanese/English Version)

Professional Standard - Machinery, day tightness

JB/T 7384.3-1994 Fasteners Test modules for head height and thickness between the slot and the supporting surface
JB/T 7384.9-1994 Fasteners Caliper for the thickness between the slot bottom and the bearing surface of slotted nut

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., day tightness

ASHRAE AN-04-9-3-2004 Cooling of High Heat Density Rooms Today and in the Future

European Committee for Standardization (CEN), day tightness

EN ISO 8970:2020 Timber structures - Testing of joints made with mechanical fasteners - Requirements for timber density (ISO 8970:2020)
EN ISO 8970:2010 Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:2010)
EN 28970:1991 Timber Structures - Testing of Joints Made with Mechanical Fasteners - Requirements for Wood Density
EN 12240:1997 Touch and close fasteners - Determination of the overall and effective widths of tapes and the effective width of a closure
EN 16128:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin
EN ISO 13845:2000 Plastics Piping Systems - Elastomeric-Sealing-Ring-Type Socket Joints for Use with Unplasticized Poly (Vinyl Chloride)(PVC-U) Pipes - Test Method for Leaktightness under Internal Pressure and with Angular Deflection ISO 13845:2000
EN 3545-002:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 Degrees C to 175 Degrees C - Part 002: Specification of performance and contact arrangements
EN 3545-004:2005 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard
EN 3545-009:2008 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 Degrees C to 175 Degrees C - Part 009: Protective cover for plug and receptacle - Product standard
EN 3545-003:2005 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 degree C to 175 degrees C - Part 003: Connectors with female contacts Product standard

German Institute for Standardization, day tightness

DIN ISO 705:2004 Rubber latex - Determination of density between 5 °C and 40 °C (ISO 705:1994)
DIN ISO 5725-3:2003 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001)
DIN EN 12350-4:2017 Testing fresh concrete - Part 4: Degree of compactability; German and English version prEN 12350-4:2017
DIN EN ISO 8970:2020-12 Timber structures - Testing of joints made with mechanical fasteners - Requirements for timber density (ISO 8970:2020); German version EN ISO 8970:2020
DIN ISO 5725-3:2003-02 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001)
DIN EN ISO 8970:2010 Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:2010); German version EN ISO 8970:2010
DIN EN ISO 8970:2020 Timber structures - Testing of joints made with mechanical fasteners - Requirements for timber density (ISO 8970:2020); German version EN ISO 8970:2020
DIN 51050:2000 Methods for tests for dense shaped refractory products - Determination of cold crushing strength of the intermediate zone of chemically bonded basic bricks
DIN EN 16128:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin; German version EN 16128:2011
DIN 28161:1987 Requirements on agitator drives; agitator speed and direction, bearing application running accuracy, dismounting space for shaft seal

IT-UNI, day tightness

The American Road & Transportation Builders Association, day tightness

AASHTO T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
AASHTO T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method

Danish Standards Foundation, day tightness

DS/ISO 5725-3/Corr.1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
DS/ISO/IEC 17982:2021 Information technology – Telecommunications and information exchange between systems – Close capacitive coupling communication physical layer (CCCC PHY)
DS/EN 28970:1994 Timber structures. Testing of joints made with mechanical fasteners. Requirements for wood density
DS/EN ISO 8970:2010 Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density

未注明发布机构, day tightness

BS ISO 5725-3:1994(2002) Accuracy (trueness and precision) of measurement methods and results — Part 3 : Intermediate measures of the precision of a standard measurement method
DIN EN 28970:1991 Timber structures; Testing of joints made with mechanical fasteners; Requirements for wood density (ISO 8970: 1989); German version EN 28 970: 1991

Professional Standard - Forestry, day tightness

LY/T 3144-2019/ISO 8970:2010 Density requirements for test specimens for connection tests of wood-metal fasteners for structural use

国家林业和草原局, day tightness

LY/T 3144-2019 Density requirements for wood-to-metal fastener connection test materials for structural use

Group Standards of the People's Republic of China, day tightness

T/GDASE 0041-2023 Test methods for bimetallic composite pipes for submarine pipelines Tightness test

Society of Automotive Engineers (SAE), day tightness

SAE AMS-T-21014-1998 Tungsten Base Metal, High Density Should Be Used Instead of MIL-T-21014D, Which Was Cancelled on October 5, 1998
SAE AMS-T-81914/4-1998 Tubing, Plastic, Extra Flexible, Convoluted, Fluorinated Ethylene Propylene, Close Convolution Should Be Used Instead of MIL-T-81914/4, Which Was Cancelled on December 18, 1998
SAE AMS3281E-2010 Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)
SAE AMS3267/4A-1992 Sealing Compound, Low Adhesion, Corrosion Inhibiting 9,000 to 14,000 Poises (900 to 1400 Pa.s), 2 Hour Application Time (B-2)
SAE AMS3267/1A-1992 Sealing Compound, Low Adhesion, Corrosion Inhibiting 200 to 600 Poises (20 to 60 Pa.s), 1/2 Hour Application Time (A-1/2)
SAE AMS3267/2A-1992 Sealing Compound, Low Adhesion, Corrosion Inhibiting 9,000 to 14,000 Poises (900 to 1400 Pa.s), 1/2 Hour Application Time (B-1/2)
SAE AMS-T-81914/2-1999 Tubing, Plastic, Extra Flexible, Convoluted, Polytetrafluoroethylene, Close Convolution FSC 9330; Should Be Used Instead of MIL-T-81914/2(AS), which Was Inactivated for New Design on 31 August 1999
SAE AMS3281F-2016 Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)
SAE AMS3281G-2022 Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)
SAE AS38999/43A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Jam Nut Mounting, Hermetic, Breech Coupling, He...
SAE AMS3269C-2011 Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities High Strength, for Intermittent Use to 360°F (182°C)
SAE AMS3281-1994 SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.35 sp gr max), for Intermittent Use to 360 °F (182 °C)

Aerospace Industries Association, day tightness

AIA NAS 1583-1992 (Inactive)Pin, 100 Degree Csk. Head Hi-Shear Rivet, Close Tolerance, 1200 Degrees F (Rev. 1)
AIA NAS 7400-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NAS 7400-7416-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NAS 7401-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NAS 7402-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NAS 7403-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NAS 7404-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NAS 7405-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NAS 7406-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NAS 7407-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NAS 7408-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NAS 7409-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NAS 7410-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NAS 7412-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NAS 7414-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NAS 7416-1996 Bolt, 100 Degree Head, Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking and Nonlocking Rev. 3
AIA NA 0039-1996 Screw, Close Tolerance, 100 Deg. Flush Head, Offset Cruciform Recess, Titanium Alloy, 660 MPa, Shear, Metric (Rev. 4)
AIA NA 0125-1996 Screw, Close Tolerance, 100 Deg. Reduced Crown Head, Offset Cruciform Recess, Titanium, 660 MPa Shear, Metric (Rev. 5)
AIA NA 0124-1996 Screw, Close Tolerance, 100 Deg. Reduced Crown Head, Offset Cruciform Recess, A-286 CRES, 660 MPa Shear, Metric (Rev. 5)
AIA NA 0123-1996 Screw, Close Tolerance, 100 Deg. Reduced Crown Head, Offset Cruciform Recess, Alloy Steel, 660 MPa Shear, Metric (Rev. 5)

Professional Standard - Energy, day tightness

NB/SH/T 6001-2020 Guidelines for interlaboratory studies to determine the precision of test methods

Electronic Components, Assemblies and Materials Association, day tightness

ECA SP3703-1999 Detail Specification for High Density Tuning Fork Contacts and Components of Certified Quality Comment Period Expires: September 20, 1999; EIA-700D0AA
ECA SP3702-1999 Detail Specification for High Density Blade Connector (396/556 Pin Contact Families) Comment Period Expires: September 20, 1999; EIA-700A0AG

Standard Association of Australia （SAA）, day tightness

AS 1289.5.3.5:1997(R2013)
AS 1012.3.4:1998 Methods of testing concrete - Determination of properties related to the consistency of concrete - Compactibility index
AS 1289.5.8.1:1995 Methods of testing soils for engineering purposes Method 5.8.1: Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-density gauge - Direct transmission mode
AS 1937.9:1991 Methods of test for sealers and adhesives for automotive purposes - Determination of shear strength of metal-to-metal adhesive

ETSI - European Telecommunications Standards Institute, day tightness

ETR 088-1993 Network Aspects (NA); Time/Type of Day Dependant Scheduling Function Support Object Classes

BE-NBN, day tightness

NBN-ISO 8970:1992 Timber structures - Testing of joints made with mechanical fasteners - Requirements of wood density

Lithuanian Standards Office , day tightness

LST EN ISO 8970:2010 Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:2010)
LST ISO 5725-3+AC1:2007 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (identical ISO 5725-3:1994 including technical corrigendum ISO 5725-3:1994/Cor.1:2001)

Underwriters Laboratories (UL), day tightness

UL 122701 BULLETIN-2016 UL Standard for Safety Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids (COMMENTS DUE: OCTOBER 17@ 2016)
UL 122701 BULLETIN-2017 UL Standard for Safety Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids (COMMENTS DUE: MARCH 6@ 2017)
UL 651A-2011 UL Standard for Safety Schedule 40 and 80 High Density Polyethylene (HDPE) Conduit (Fifth Edition; Reprint with revisions through and including December 9@ 2016)
UL 910-1995 UL Standard for Safety Test for Flame-Propagation and Smoke-Density Values for Electrical and Optical-Fiber Cables Used in Spaces Transporting Environmental Air (Fourth Edition; Reprint with Revisions Through and Including May 02@ 1995)
UL 567A BULLETIN-2018 UL OUTLINE OF INVESTIGATION FOR EMERGENCY BREAKAWAY FITTINGS@ SWIVEL CONNECTORS AND PIPE-CONNECTION FITTINGS FOR GASOLINE/ETHANOL BLENDS WITH NOMINAL ETHANOL CONCENTRATIONS UP TO 85 PERCENT (E0 – E85) (COMMENTS DUE: May 7@ 2018)
UL 567A BULLETIN-2014 OUTLINE OF INVESTIGATION FOR EMERGENCY BREAKAWAY FITTINGS@ SWIVEL CONNECTORS AND PIPE-CONNECTION FITTINGS FOR GASOLINE/ETHANOL BLENDS WITH NOMINAL ETHANOL CONCENTRATIONS UP TO 85 PERCENT (E0 – E85) (COMMENTS DUE: MAY 26@ 2014)
UL 567A BULLETIN-2015 UL OUTLINE OF INVESTIGATION FOR EMERGENCY BREAKAWAY FITTINGS@ SWIVEL CONNECTORS AND PIPE-CONNECTION FITTINGS FOR GASOLINE/ETHANOL BLENDS WITH NOMINAL ETHANOL CONCENTRATIONS UP TO 85 PERCENT (E0 – E85) (COMMENTS DUE: JUNE 1@ 2015)
UL 122701-2011 UL Standard for Safety Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids (Second Edition; Reprint with revisions through and including June 6@ 2016)

IN-BIS, day tightness

IS 5420 Pt.2-1973

Society of Motion Picture and Television Engineers (SMPTE), day tightness

SMPTE RP 180-1999 Spectral Conditions Defining Printing Density in Motion-Picture Negative and Intermediate Films

AT-ON, day tightness

ONORM EN 28970-1991 Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:1989)

SAE - SAE International, day tightness

SAE AMS3276B-1998 Sealing Compound@ Integral Fuel Tanks and General Purpose@ Intermittent Use to 360 Degrees F (182 Degrees C)
SAE AMS3276-1993 Sealing Compound@ Integral Fuel Tanks and General Purpose@ Intermittent Use to 360 Degrees F (182 Degrees C)
SAE AMS3276A-1995 Sealing Compound@ Integral Fuel Tanks and General Purpose@ Intermittent Use to 360 Degrees F (182 Degrees C)
SAE AMS3276C-1999 Sealing Compound@ Integral Fuel Tanks and General Purpose@ Intermittent Use to 360 Degrees F (182 Degrees C)
SAE AMS3281C-2003 Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)
SAE AMS3259-1996 Sealing Compound@ Polythioether Nonchromated@ Corrosion Inhibiting for Intermittent Use to 360 Degrees F (182 Degrees C)
SAE AMS3259B-2005 Sealing Compound@ Polythioether Nonchromated@ Corrosion Inhibiting for Intermittent Use to 360 Degrees F (182 Degrees C)
SAE AMS3281A-1996 Sealing Compound@ Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr)@ for Intermittent Use to 360 Degrees F (182 Degrees C)
SAE AMS3281B-1999 Sealing Compound@ Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr)@ for Intermittent Use to 360 Degrees F (182 Degrees C)
SAE AS38999/43A-1998 Connectors@ Electrical@ Circular@ Miniature@ High Density@ Quick Disconnect (Bayonet@ Threaded@ and Breech Coupling)@ Environment Resistant@ Removable Crimp and Hermetic Solder Contacts@ Receptacle@ Jam Nut Mounting@ Hermetic@ Breech Coupling@ Hermetic So
SAE AS38999/43-1998 Connectors@ Electrical@ Circular@ Miniature@ High Density@ Quick Disconnect (Bayonet@ Threaded@ and Breech Coupling)@ Environment Resistant@ Removable Crimp and Hermetic Solder Contacts@ Receptacle@ Jam Nut Mounting@ Hermetic@ Breech Coupling@ Hermetic So
SAE AMS3277A-1999 Sealing Compound@ Polythioether Integral Fuel Tanks and General Purpose@ Fast Curing Intermittent Use to 360 Degrees F (182 Degrees C)
SAE AMS3277-1995 Sealing Compound@ Polythioether Integral Fuel Tanks and General Purpose@ Fast Curing Intermittent Use to 360 Degrees F (182 Degrees C)
SAE AMS3265A-2001 Sealing Compound@ Polysulfide (T) Rubber@ Nonchromated@ Corrosion Inhibiting for Intermittent Use to 360 Degrees F (182 Degrees C)
SAE AMS3265-1996 Sealing Compound@ Polysulfide (T) Rubber Nonchromated@ Corrosion Inhibiting for Intermittent Use to 340 Degrees C (171 Degrees F)
SAE AMS3279-1997 Sealing Compound@ Sprayable@ For Integral Fuel Tanks and Fuel Cell Cavities@ Intermittent Use to 350 Degrees F (177 Degrees C)
SAE AMS3281D-2008 Sealing Compound@ Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)
SAE AMS3269-1993 Sealing Compound@ Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities High Strength@ for Intermittent Use to 360 Degrees F (182 Degrees C)

International Commission on Illumination (CIE), day tightness

CIE 110-1994 Spatial Distribution of Daylight - Luminance Distributions of Various Reference Skies (CIE 110.1-1995 Revision 1)

Aerospace Industries Association/ANSI Aerospace Standards, day tightness

AIA/NAS NAS5320-2012 SCREW, SHEAR, 100 DEG FLUSH REDUCED HEAD, CLOSE TOLERANCE, NAS1800 SIX LOBE RECESS, 95 KSI FSU (Rev 1)
AIA/NAS NA0124-2011 SCREW, CLOSE TOLERANCE, 100 DEG. REDUCED CROWN HEAD, OFFSET CRUCIFORM RECESS, A286 CRES, 660 MPa SHEAR, METRIC (Rev 6)

ES-UNE, day tightness

UNE-EN ISO 8970:2020 Timber structures - Testing of joints made with mechanical fasteners - Requirements for timber density (ISO 8970:2020)

European Telecommunications Standards Institute (ETSI), day tightness

ETSI ETR 088-1993 Network Aspects (NA); Time/Type of Day Dependant Scheduling Function Support Object Classes

International Telecommunication Union (ITU), day tightness

ITU-R OPINION 96-1997 Future Use of the Global Navigation Satellite Ssytem (GNSS) for High-Precision Time Transfer
ITU-R S.1433-2000 UPLINK AND INTER-SATELLITE EQUIVALENT POWER FLUX-DENSITY RADIATED BY NON-GSO FSS SYSTEMS
ITU-R S.1594-2002 Technical characteristics of high density fixed-satellite service earth stations transmitting towards geostationary fixed-satellite service space stations in the 30 GHz range*

American National Standards Institute （ANSI), day tightness

ANSI/ASTM E691:2013 PRACTICE FOR CONDUCTING AN INTERLABORATORY STUDY TO DETERMINE THE PRECISION OF A TEST METHOD
ANSI/EIA 700AOAF:2000 Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI)
ANSI/EIA 540FAAB:1992 Detail Specification for Multi-Package 100 Mil Pitch, Angled Mounting Format Module Sockets for Use in Electronic Equipment
ANSI/EIA 540FAAD:1992 Detail Specification for Multi-Package 50 Mil Pitch, Angled Mounting Format Module Sockets for Use in Electronic Equipment
ANSI/ASTM F2510/F 2510M:2007 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes

工业和信息化部, day tightness

YD/T 3320.1-2018 Temperature control equipment for communication high heat density equipment rooms Part 1: Inter-column temperature control equipment

ZA-SANS, day tightness

SANS 6043:2005 Breaking strength in tension of wood adhesive bonds in close-joint and gap-joint test pieces
SANS 1700-4-2:1996 Fasteners Part 4: Tolerances Section 2: Bolts, screws and nuts with thread diameters from 1 up to 3 mm and product grade F for fine mechanics

GM Global, day tightness

GMW 16680-2012 Sealers, Paint Shop, Pumpable, for Waterborne/2K, 3-Wet, Non-Compressed, Compact Painting Process ?Generic Qualification Issue 1; English

European Association of Aerospace Industries, day tightness

AECMA PREN 3545-001-2006 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 癈 to 175 癈 Part 001: Technical specification Edition P 4
AECMA PREN 3545-001-2004 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification Edition P 3
AECMA PREN 3545-001-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification Edition P 2
AECMA PREN 3545-007-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard Edition P 2
AECMA PREN 3545-007-2004 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard Edition P 3
AECMA PREN 3545-007-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard Edition P 1
AECMA PREN 3545-002-2006 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 癈 to 175 癈 Part 002: Specification of performance and contact arrangements Edition P 5
AECMA PREN 3545-002-1998 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of Performance and Contact Arrangements Edi
AECMA PREN 3545-002-2004 Aerospace series Connectors, electrical rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of performance and contact arrangements Editi
AECMA PREN 3545-002-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Devices, Operating Temperatures - 55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of Performance and Contact Arrangements Ed
AECMA PREN 3545-001-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification Edition P 1; Corrigendum 04/30/1995
AECMA PREN 3545-003-2004 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with female contacts Product standard Edition P 3
AECMA PREN 3545-003-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with Female Contacts Product Standard Edition P 2
AECMA PREN 3545-003-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with Female Contacts Product Standard Edition P 1
AECMA PREN 3545-004-2004 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts - Product Standard Edition P 3
AECMA PREN 3545-004-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts Product Standard Edition P 2
AECMA PREN 3545-004-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts Product Standard Edition P 1
AECMA PREN 3545-009-2006 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 癈 to 175 癈 Part 009: Protective cover for plug and receptacle Product standard Edition P 1
AECMA PREN 3545-005-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 005 : Female Coding and Attachment System for Mounting on Free Housing (Pl
AECMA PREN 3545-006-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 006: Male Coding and Attachment System for Mounting on Fixed Housing (Rece
AECMA PREN 3545-008-2005 Aerospace Series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 degrees C to 175 degrees C Part 008: Tools for assembly/removal of coding and attachment system Product st

Defense Logistics Agency, day tightness

DLA MIL-DTL-28804 D (1)-1999 CONNECTORS, PLUG AND RECEPTACLE, ELECTRIC, RECTANGULAR, HIGH DENSITY, POLARIZATION CENTER JACKSCREW, GENERAL SPECIFICATION FOR
DLA MIL-DTL-28804 D-1998 CONNECTORS, PLUG AND RECEPTACLE, ELECTRIC, RECTANGULAR, HIGH DENSITY, POLARIZATION CENTER JACKSCREW, GENERAL SPECIFICATION FOR
DLA MIL-DTL-28840/14 F-2009 CONNECTORS, ELECTRICAL, CIRCULAR, SCREW THREADS, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CRIMP CONTACTS, RECEPTACLE, JAM NUT MOUNTING, CLASSES D, DS, P, T AND Z

Institute of Electrical and Electronics Engineers (IEEE), day tightness

SMPTE RP 180:1999 RP 180:1999 - SMPTE Recommended Practice - Spectral Conditions Defining Printing Density in Motion-Picture Negative and Intermediate Films

TR-TSE, day tightness

TS 1954-1975 LIQUEFIED PHENOL, m-CRESOL, CRESYLIC ACID AND XYLENOLS FOR INDUSTRIAL USE DETERMINATION OF DENSITY AT 20°C

Electronic Components, Assemblies and Materials Association, day tightness

ECA EIA-700A0AF-2000 Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI)

CEN - European Committee for Standardization, day tightness

EN 3545-002:2005 Aerospace series - Connectors@ electrical@ rectangular@ with sealed and non-sealed rear@ plastic housing@ locking device@ operating temperatures -55 degrees C to 175 degrees C - Part 002: Specification of performance and contact arrangements

ECIA - Electronic Components Industry Association, day tightness

EIA-700A0AF-2000 Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI)
EIA-540FAAD-1992 Detail Specification for Multi- Package 50 Mil Pitch@ Angled Mounting Format Module Sockets for Use in Electronic Equipment
540FAAD-1992 Detail Specification for Multi-Package 50 Mil Pitch@ Angled Mounting Format Module Sockets for Use in Electronic Equipment

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, day tightness

PREN 3646-006-1996 Aerospace Series Connectors@ Electrical@ Circular@ Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty Part 006 - Jam-Nut Mounted Round Flange Hermetic Receptacle (Edition: 5E)
PREN 3646-004-1996 Aerospace Series Connectors@ Electrical@ Circular@ Bayonet Coupling - Operating Temperature 175 Degrees C or 200 Degrees C Continuous Duty PArt 004: Jam-Nut Mounted Round Flange Sealed Receptacle (Edition: 5E)
PREN 2997-006-2005 Aerospace Series Connectors@ Electrical@ Circular@ Coupled by Threaded Ring@ Fire-Resistant or Non Fire-Resistant@ Operating Temperatures -65 Degrees C to 175 Degrees C Continuous@ 200 Degrees C Continuous@ 260 Degrees C Peak Part 006: Hermetic Jam-Nut Mo
PREN 3372-009-2005 Aeropsace Series Connectors@ Electrical@ Circular@ Medium and High Contact Density@ Scoop-Proof with Bayonet Coupling@ Operating Temperatures - 65 Degrees C to 175 Degrees C or 200 Degrees C Continuous Part 009: Receptacle@ Jam Nut Mounting Product Standa

Aerospace, Security and Defence Industries Association of Europe (ASD), day tightness

ASD-STAN PREN 3545-001-2006 Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures ? 55 °C to 175 °C Part 001: Technical specification (Edition P 4)