ZH
RU
ES

Asphaltene detection method

Asphaltene detection method, Total:500 items.

In the international standard classification, Asphaltene detection method involves: Road engineering, Road vehicle systems, Waxes, bituminous materials and other petroleum products, Pulps, Road vehicles in general, Construction materials, Organic chemicals, Thermodynamics and temperature measurements, Products of the textile industry, Paints and varnishes, Crude petroleum, Nuclear energy engineering, Protection of and in buildings.

Indonesia Standards, Asphaltene detection method

SNI 03-6885-2002 Methods of spot test of oil asphalt
SNI 03-6894-2002 Test method for asphalt content from asphalt mixtures by centrifuge
SNI 03-6829-2002 Test method of emulsion asphalt residue content by evaporation
SNI 03-6756-2002 Test method for determination of asphalted hardening density level
SNI 03-6758-2002 Test method for compressive strength of asphalt mixture
SNI 03-6831-2002 Test method of adhering emulsion asphalt M-50 aggregate
SNI 03-6835-2002 Tes method of effect of heat and air on a moving film of asphal (rolling thin film oven test)
SNI 06-6400-2000 Methods for determination of asphalt volume correction to volume at standard temperature
SNI 06-6721-2002 Viscocity test methods for liquid asphlat and emulsified asphlat by saybolt devices
SNI 03-6830-2002 Test methods for damage of emulsion asphalt and cement mixtures
SNI 03-6833-2002 Test methods of inorganic materials or ash contents in asphalt
SNI ASTM D6934:2012 Metode uji residu aspal emulsi dengan penguapan
SNI 03-6755-2002 Test methods for bulk specific gravity of compact asphalt mixture using parafin layer test specimens
SNI 06-6452-2000 Test methods for bitumen paint used as protective coating
SNI 03-6752-2002 Test method of water and light fraction content in asphalted hardening mixture
SNI 03-6757-2002 Test method for bulk specific gravity of compact asphalt mixture using saturated surface dry test specimens
SNI 03-6754-2002 Test method of air cavity in bituminous paving of compacted dense and open graded
SNI 2490-2008 Testing methodes for water content of asphalt and material contain asphalt by using of destilation method
SNI 06-6893-2002 Test methods of maximum specicific gravity of bituminous paving mixtures
SNI ASTM D6935:2012 Metode uji penentuan campuran semen pada aspal emulsi

BR-ABNT, Asphaltene detection method

Group Standards of the People's Republic of China, Asphaltene detection method

T/SMHTA 004-2023 DetectionMethod for Asphalt Gas Emission
T/HNCAA 044-2023 Standard for foaming quality and testing methods of foamed asphalt

The American Road & Transportation Builders Association, Asphaltene detection method

AASHTO T 50-1999 Standard Method of Test for Float Test for Bituminous Materials
AASHTO T 59-2008 Standard Method of Test for Emulsified Asphalts
AASHTO T 59-2001 Standard Method of Test for Testing Emulsified Asphalts
AASHTO T 78-2010 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products
AASHTO T 287-2006 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
AASHTO T 287-2014 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
AASHTO T 164-2010 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
AASHTO T 164-2013 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
AASHTO T 164-2014 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
AASHTO T 201-2010 Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens)
AASHTO T 201-2015 Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens)
AASHTO T 308-2010 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
AASHTO T 308-2008 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
AASHTO T 44-2003(R2007) Standard Method of Test for Solubility of Bituminous Materials
AASHTO T 44-2013 Standard Method of Test for Solubility of Bituminous Materials
AASHTO T 49-2014 Standard Method of Test for Penetration of Bituminous Materials
AASHTO T 44-2014 Standard Method of Test for Solubility of Bituminous Materials
AASHTO T 49-2015 Standard Method of Test for Penetration of Bituminous Materials
AASHTO T 319-2008 Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
AASHTO TP 72-2008 Standard Method of Test for Quantitative Determination of the Percentage of Lime in Hot Mix Asphalt (HMA)
AASHTO T 383-2021 Standard Method of Test for Evaluation of Asphalt Release Agents (ARAs)
AASHTO TP 91-2011 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Asphalt Bond Strength (ABS) Test
AASHTO TP 63-2007 Standard Method of Test for Determining Rutting Susceptibility of Hot-Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
AASHTO TP 92-2014 Standard Method of Test for Determining the Cracking Temperature of Asphalt Binder Using the Asphalt Binder Cracking Device (ABCD)
AASHTO T 53-2008 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
AASHTO T 195-1967 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
AASHTO T 53-2011 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
AASHTO T 317-2004 Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures
AASHTO T 355-2015 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods

Korean Agency for Technology and Standards (KATS), Asphaltene detection method

KS M 2248-2005(2020) Testing method for kinematic viscosity of asphalts(bitumens)
KS F 2354-2013 Standard test method for asphalt content from asphalt paving mixtures
KS F 2354-1982 Standard test method for asphalt content from asphalt paving mixtures
KS F 2490-2016 Standard test method for asphalt content of hot-mix asphalt by ignition method
KS F 2490-2022 Standard test method for asphalt content of hot-mix asphalt by ignition method
KS F 2490-2016(2021) Standard test method for asphalt content of hot-mix asphalt by ignition method
KS F 2365-1995 Testing Method for Quantitative Extraction of Bitumen from Bitminous Paving Mixtures
KS F 2365-1995(2000) TESTING METHOD FOR QUANTITATIVE EXTRACTION OF BITUMEN FROM BITUMINOUS PAVING MIXTURES
KS F 2353-2010(2017) Standard test method for specific bulk gravity of compacted asphalt mixtures
KS M 2252-2007(2017) Testing method for penetrating of bituminous materials
KS M 2254-2007(2017) Testing method for ductility of bituminous materials
KS M 2257-2007(2017) Testing method for distillation of cut-back asphaltic products
KS F 2493-2007 Standard test method of binder run-off test for porous asphalt mixtures
KS M 2250-2019 Petroleum product — Testing method for softening point of bituminous materials(Ring and ball method)
KS F 2364-2013 Standard test method for percent air voids in compacted dense and open asphalt mixtures
KS F 2364-1976 Standard test method for percent air voids in compacted dense and open asphalt mixtures
KS F 2392-2004 Standard test method for viscosity determination of asphalt binder using rotational viscometer
KS F 2487-2005(2010) Standard test method for preparation of asphalt mixture specimens for performance testing
KS M 2258-2007(2017) Testing method for effect of heat on thin-film of asphaltic materials

ES-AENOR, Asphaltene detection method

Association Francaise de Normalisation, Asphaltene detection method

XP CEN/TS 17481:2020 Bitumes et liants bitumineux - Détermination de la teneur en sel des bitumes - Méthode par mesure de conductivité
NF EN 12697-36:2022 Mélanges bitumineux - Méthodes d'essai - Partie 36 : méthode d'évaluation d'épaisseur d'un revêtement bitumineux
NF P98-818-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6 : determination of bulk density of bituminous specimens.
NF T66-082*NF EN 16849:2016 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
NF EN 13589:2018 Bitumes et liants bitumineux - Détermination des caractéristiques de traction des bitumes modifiés par la méthode de force ductilité
NF T66-038:2010 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method.
NF EN 13587:2017 Bitumes et liants bitumineux - Détermination des caractéristiques de traction des liants bitumineux par la méthode d'essai de traction
NF EN 12697-47:2010 Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 47 : détermination de la teneur en cendres des bitumes naturels
NF P98-818-11:2006 Bituminous mixtures - Test methods for hot mix asphalt - Part 11 : determination of the affinity between aggregate and bitumen.
NF P98-818-11:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 11: determination of the affinity between aggregate and bitumen
NF EN 16849:2016 Bitumes et liants bitumineux - Détermination de la teneur en eau des émulsions de bitume - Méthode par évaporation à la balance dessiccatrice
NF EN 12697-11:2020 Mélanges bitumineux - Méthodes d'essai - Partie 11 : détermination de l'affinité granulat-bitume
NF P98-818-29:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 29 : determination of the dimensions of a bituminous specimen.
NF P98-818-36:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 36 : determination of the thickness of a bituminous pavement.
NF P98-818-12:2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 12 : determination of the water sensitivity of bituminous specimens.
NF P98-818-47*NF EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47 : determination of the ash content of natural asphalts.
NF P98-818-23:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 23 : determination of the indirect tensile strength of bituminous specimens.
NF P98-818-36*NF EN 12697-36:2022 Bituminous mixtures - Test methods - Part 36 : determination of the thickness of bituminous pavement
NF P98-818-29*NF EN 12697-29:2020 Bituminous mixtures - Test methods - Part 29 : determination of the dimensions of a bituminous specimen
NF EN 12697-29:2020 Mélanges bitumineux - Méthodes d'essai - Partie 29 : détermination des dimensions des éprouvettes bitumineuses
NF P98-818-13:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 13 : temperature measurement.
NF P98-818-2:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2 : Determination of particle size distribution.
NF P98-818-5:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 5 : determination of the maximum density.
NF EN 12697-6:2020 Mélanges bitumineux - Méthodes d'essai - Partie 6 : détermination de la masse volumique apparente des éprouvettes bitumineuses
NF EN 12697-42:2021 Mélanges bitumineux - Méthodes d'essai - Partie 42 : quantité de matériaux étrangers présents dans les agrégats d'enrobés
NF P98-818-7:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 7 : determination of bulk density of bituminous specimens by gamma rays.
NF P98-818-15:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15 : determination of the segregation sensitivity.
NF EN 12697-12:2018 Mélanges bitumineux - Méthodes d'essai - Partie 12 : détermination de la sensibilité à l'eau des éprouvettes bitumineuses
NF EN 12697-55:2019 Mélanges bitumineux - Méthodes d'essai - Partie 55 : évaluation organoleptique des mélanges à l'émulsion de bitume
NF P98-818-49:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 49 : determination of friction after polishing
NF EN 15626:2017 Bitumes et liants bitumineux - Détermination de l'adhésivité des liants bitumineux fluidifiés et fluxés par l'essai d'immersion dans l'eau - Méthode utilisant des granulats
NF P98-818-11*NF EN 12697-11:2020 Bituminous mixtures - Test methods - Part 11 : determination of the affinity between aggregate and bitumen
NF EN 12697-23:2017 Mélanges bitumineux - Méthode d'essais - Partie 23 : Détermination de la résistance à la traction indirecte des éprouvettes bitumineuses
NF P98-818-39:2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 39 : binder content by ignition.
NF P98-818-39:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 39 : binder content by ignition.
NF P98-818-23*NF EN 12697-23:2017 E: Bituminous mixtures -Test methods - Part 23 : Determination of the indirect tensile strength of bituminous specimens

IN-BIS, Asphaltene detection method

Japanese Industrial Standards Committee (JISC), Asphaltene detection method

JIS P 8205:1976 Method of testing pitch content of paper pulp

VN-TCVN, Asphaltene detection method

TCVN 7500-2005 Bitumen.Test method for solubility in trichloroethylene
TCVN 7499-2005 Bitumen.Test method for determination of loss on heating
TCVN 7502-2005 Bitumen.Test method for determination of kinematic viscosity
TCVN 7501-2005 Bitumen.Test method for determination of density (Pycnometer method)
TCVN 3185-1979 Petroleum bitumen.Method for the determination of water.soluble acid and alkali
TCVN 3186-1979 Petroleum bitumen.Method for determination of percentage of water soluble
TCVN 7504-2005 Bitumen.Test method for determination of adhesion with paving stone

British Standards Institution (BSI), Asphaltene detection method

BS EN 12697-12:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 12:Determination of the water sensitivity of bituminous specimens
BS EN 12697-47:2010 Bituminous mixtures.Test methods for hot mix asphalt. Part 47:Determination of the ash content of natural asphalts
BS EN 12697-12:2008 Bituminous mixtures — Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens
BS EN 12697-36:2003 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the thickness of a bituminous pavement
BS EN 12697-11:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 11:Determination of the affinity between aggregate and bitumen
BS EN 12697-36:2022 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the thickness of a bituminous pavement
BS EN 12697-6:2012 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens
BS EN 12697-6:2003 Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density of bituminous specimens
BS EN 13587:2010 Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method
BS EN 12697-8:2003 Bituminous mixtures - Test methods for hot mix asphalt - Determination of void characteristics of bituminous specimens
BS EN 12697-23:2003 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the indirect tensile strength of bituminous specimens
BS EN 13301:2003 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of staining tendency of bitumens
BS EN 12697-11:2012 Bituminous mixtures. Test methods for hot mix asphalt. Determination of the affinity between aggregate and bitumen
BS EN 12697-11:2005 Bituminous mixtures — Test methods for hot mix asphalt — Part 11: Determination of the affinity between aggregate and bitumen
BS EN 12697-9:2002 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the reference density
BS EN 12697-47:2023 Bituminous mixtures. Test methods - Determination of the ash content of natural asphalts
BS EN 12697-7:2014 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-56:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-7:2002 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the bulk density of bituminous specimens by gamma rays
BS EN 12697-48:2021 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-55:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-53:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-54:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 13587:2016 Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method
BS EN 12697-5:2002 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the maximum density
BS EN 12697-2:2002 Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle size distribution
BS EN 12697-5:2009 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the maximum density
BS EN 12697-5:2010 Bituminous mixtures. Test methods for hot mix asphalt. Determination of the maximum density
BS EN 12849:2002 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of penetration power of bitumen emulsions
BS EN 12847:2002 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of settling tendency of bitumen emulsions
BS EN 1430:2000 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of particle polarity of bitumen emulsions
BS EN 12697-39:2012 Bituminous mixtures. Test methods for hot mix asphalt. Binder content by ignition
BS EN 12697-39:2004 Bituminous mixtures - Test methods for hot mix asphalt - Binder content by ignition
BS EN 12697-49:2014 Bituminous mixtures. Test methods for hot mix asphalt. Determination of friction after polishing
BS EN 12697-12:2018 Tracked Changes. Bituminous mixtures. Test methods. Determination of the water sensitivity of bituminous specimens
BS EN 12697-8:2018 Tracked Changes. Bituminous mixtures. Test methods. Determination of void characteristics of bituminous specimens
BS EN 12697-6:2020 Tracked Changes. Bituminous mixtures. Test methods. Determination of bulk density of bituminous specimens
BS EN 1428:2000 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method
BS EN 13589:2003 Methods of test for petroleum and its products - BS 2000-520:Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
BS EN 13702-1:2004 Methods of test for petroleum and its products. BS 2000-513. Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen. Cone and plate method
BS EN 13303:2003 Methods of test for petroleum and its products - BS 2000-506: Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumens
BS EN 13587:2004 Methods of test for petroleum and its products - BS 2000-519: Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
BS EN 13302:2003 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of viscosity of bitumen using a rotating spindle apparatus
BS EN 12697-15:2003 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the segregation sensitivity
BS EN 12697-15:2022 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the segregation sensitivity
BS EN 12697-11:2020 Tracked Changes. Bituminous mixtures. Test methods. Determination of the affinity between aggregate and bitumen
20/30426174 DC BS EN 12697-36. Bituminous mixtures. Test methods. Part 36. Determination of the thickness of bituminous pavement
18/30382716 DC BS EN 12697-29. Bituminous mixtures. Test methods. Part 29. Determination of the dimensions of a bituminous specimen
BS EN 12697-23:2017 Tracked Changes. Bituminous mixtures. Test methods. Determination of the indirect tensile strength of bituminous specimens
BS EN 13399:2004 Methods of test for petroleum and its products - BS2000-517 - Bitumen and bituminous binders - Determination of storage stability of modified bitumen
BS EN 13398:2004 Methods of test for petroleum and its products. BS2000-516. Bitumen and bituminous binders. Determination of the elastic recovery of modified bitumen
BS EN 12697-17:2017 Tracked Changes. Bituminous mixtures. Test methods. Particle loss of porous asphalt specimens
BS EN 13702-2:2004 Methods of test for petroleum and its products - BS 2000-514: Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Coaxial cylinders method
BS EN 13632:2004 Methods of test for petroleum and its products. BS2000-518. Bitumen and bituminous binders. Visualisation of polymer dispersion in polymer modified bitumen
BS EN 13614:2004 Methods of test for petroleum and its products - BS 2000-521: Bitumen and bituminous binders - Determination of adhesivity of bitumen emulsions by water immersion test - Aggregate method
BS EN 12848:2002 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of mixing stability with cement of bitumen emulsions
14/30311115 DC BS EN 12697-8. Bituminous mixtures. Test methods. Part 8. Determination of void characteristics of bituminous specimens
18/30382725 DC BS EN 12697-6. Bituminous mixtures. Test methods. Part 6. Determination of bulk density of bituminous specimens
BS EN 12697-7:2022 Tracked Changes. Bituminous mixtures. Test methods. Determination of the bulk density of bituminous specimens by gamma rays
BS EN 13703:2004 Methods of test for petroleum and its products - BS 2000-515: Bitumen and bituminous binders - Determination of deformation energy
BS EN 13703:2003*BS 2000-515:2003 Methods of test for petroleum and its products - BS 2000-515: Bitumen and bituminous binders - Determination of deformation energy
BS EN 13358:2004 Methods of test for petroleum and its products. BS 2000-525. Bitumen and bituminous binders. Determination of the distillation characteristics of petroleum cut-back bitumen products
BS EN 13357:2003 Methods of test for petroleum and its products - BS 2000-502: Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens
BS EN 13357:2002 Methods of test for petroleum and its products BS 2000-502: Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens
BS EN 12846:2002 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of efflux time of bitumen emulsions by the efflux viscometer method
BS EN 13357:2002(2005)*BS 2000-502:2002 Methods of test for petroleum and its products - BS 2000-502: Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens
BS EN 12697-45:2012 Bituminous mixtures. Test methods for hot mix asphalt. Saturation Ageing Tensile Stiffness (SATS) conditioning test
19/30396552 DC BS EN 12697-42. Bituminous mixtures. Test methods. Part 42. Amount of foreign matter in reclaimed asphalt
BS EN 1431:2000 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of recovered binder and oil distillate from bitumen emulsions by distillation
BS 598-107:2004 Sampling and examination of bituminous mixtures for roads and other paved areas - Method of test for the determination of the composition of design surface course rolled asphalt
18/30382740 DC BS EN 12697-11. Bituminous mixtures. Test methods. Part 11. Determination of the affinity between aggregate and bitumen
BS EN 12697-2:2015 Bituminous mixtures. Test methods. Determination of particle size distribution
BS EN 12697-2:2015+A1:2019 Bituminous mixtures. Test methods. Determination of particle size distribution
21/30438592 DC BS EN 12697-47. Bituminous mixtures. Test methods - Part 47. Determination of the ash content of natural asphalts

VE-FONDONORMA, Asphaltene detection method

AASHTO - American Association of State Highway and Transportation Officials, Asphaltene detection method

T 78-2010 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products
T 78-2005 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products
T229-1985 Standard Method of Test for Density of Solid Pitch and Asphalt (Displacement Method) (R 1993)
T 287-2014 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
T 287-2006 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
T 287-2005 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
T 287-2004 Standard Method of Test for Asphalt Binder Content of Asphalt Concrete Mixtures by the Nuclear Method
TP53-1997 Standard Test Method for Determining the Asphalt Content of Hot Mix Asphalt (HMA) by the Ignition Method
T 59-1994 Standard Method of Test for Testing Emulsified Asphalts
T 59-2001 Standard Method of Test for Testing Emulsified Asphalts
T 308-2005 Standard Method of Test for Determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) by the Ignition Method
T 308-2004 Standard Method of Test for Determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) by the Ignition Method
TP53-1995 Standard Test Method for Determining the Asphalt Content of Hot Mix Asphalt (HMA) by the Ignition Method (First Edition)
T 164-2008 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
T 164-2010 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
T 164-2006 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot-Mix Asphalt (HMA)
T 164-2013 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
T 164-2014 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
T 164-2011 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
T 201-2003 Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens)
T 201-2010 Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens)
T 201-2015 Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens)
T 201-2009 Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens)
T 308-2010 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
T 308-2008 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
T 308-2009 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
T 308-2016 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
T78-1996 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products (Twentieth Edition; ASTM D402-94)
T 44-2013 Standard Method of Test for Solubility of Bituminous Materials
T 51-2008 Standard Method of Test for Ductility of Bituminous Materials
T 49-2014 Standard Method of Test for Penetration of Bituminous Materials
T 49-2007 Standard Method of Test for Penetration of Bituminous Materials
T 44-2003 Standard Method of Test for Solubility of Bituminous Materials
T 51-2009 Standard Method of Test for Ductility of Asphalt Materials
T 44-2014 Standard Method of Test for Solubility of Bituminous Materials
T 51-2006 Standard Method of Test for Ductility of Bituminous Materials
T 49-2015 Standard Method of Test for Penetration of Bituminous Materials
T49-1993 Standard Method of Test for Penetration of Bituminous Materials
T287-1993 Standard Method of Test for Asphalt Cement Content of Asphalt Concrete Mixtures by the Nuclear Method (Eighteenth Edition; ASTM D4125-92)
TP2-1994 Standard Test Method for the Quantitative Extraction and Recovery of Asphalt Binder from Hot Mix Asphalt (HMA)
T 383-2018 Standard Method of Test for Evaluation of Asphalt Release Agents (ARAs)
TP 91-2011 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Asphalt Bond Strength (ABS) Test
T 201-2001 Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens) (HM-22; Part IIB; ASTM Designation D 2170-95)
TP 92-2011 Standard Method of Test for Determining the Cracking Temperature of Asphalt Binder Using the Asphalt Binder Cracking Device (ABCD)
TP 92-2014 Standard Method of Test for Determining the Cracking Temperature of Asphalt Binder Using the Asphalt Binder Cracking Device (ABCD)
T 228-2009 Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials
T 228-2006 Standard Method of Test for Specific Gravity of Semi-Solid Bituminous Materials
T 53-2009 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
T 53-2008 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
T 53-2006 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
T 53-1992 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
T 355-2018 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
T 355-2015 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods

RU-GOST R, Asphaltene detection method

GOST 11507-1978 Petroleum bitumen. Method for determination of Fraas break point
GOST EN 12593-2013 Bitumens and bituminous binders. Method for determination of the Fraass breaking point
GOST 11504-1973 Petroleum bitumens. Method for determination of diluent quantity vaporized from liquid bitumens
GOST EN 13303-2013 Bitumens and bituminous binders. Method for determination of loss of mass after heating
GOST 32154-2013 Bituminous materials. Method for determination of penetration
GOST 11508-1974 Petroleum bitumens. Methods for determination of bitumen adhesion to marble and sand
GOST 32056-2013 Bituminous materials. Method for determination of ductility
GOST 11505-1975 Petroleum bitumens. Method for determination of ductility
GOST 11501-1978 Petroleum bitumens. Method for determination of depth of needle penetration
GOST 11503-1974 Petroleum bitumens. Method for determination of assumed viscosity
GOST 17789-1972 Petroleum bitumens. Method for determination of paraffin content
PNST 108-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of air voids content
GOST EN 13075-1-2013 Bitumens and bituminous binders. Determination of breaking behaviour. Part 1. Determination of breaking value of cationic bituminous emulsions by mineral filler method
PNST 92-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of maximum density
PNST 106-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of bulk density
PNST 130-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for the determination of shear deformation
PNST 133-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of the dynamic modulus
PNST 182-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the effect of icing reagents
PNST 95-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determining the degree of coating grains of aggregate by asphalt binder
PNST 134-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the internal angle of rotation of the rotary seal to the Superpave (SGC)
GOST 12784-1978 Mineral powder for asphaltic mixtures. Methods of tests

BELST, Asphaltene detection method

STB 2188-2011 Bitumen and bituminous binder. Method for determination of dynamic viscosity

AENOR, Asphaltene detection method

UNE 104281-0-2:1987 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS NO BITUMINOUS RAW MATERIALS TESTING METHODS. DETERMINATION OF FILLER MOISTURE
UNE-EN 12697-36:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement
UNE-EN 12697-29:2003 Bituminous mixtures - Test method for hot mix asphalt - Part 29: Determination of the dimensions of a bituminous specimen.
UNE-EN 12697-10:2003 BITUMINOUS MIXTURES. TEST METHODS FOR HOT MIX ASPHALT. PART 10: COMPACTABILITY.
UNE-EN 12697-12:2009 Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens
UNE-EN 12697-47:2011 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts
UNE-EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
UNE-EN 12697-8:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens
UNE-EN 12697-23:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens
UNE-EN 12697-11:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen
UNE-EN 12697-13:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement.
UNE-EN 12697-7:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays
UNE 104281-4-1:1985 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. JOINT SEALANTS FOR CONCRETE ELEMENTS. TESTING METHODS. "SAMPLING"
UNE 104281-4-3:1985 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. JOINT SEALANTS FOR CONCRETE ELEMENTS. TESTING METHODS. FLOW
UNE 104281-4-2:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. JOINTS SEALANT FOR CONCRETE ELEMENTS. TESTING METHODS. PENETRATION
UNE-EN 12697-5:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
UNE-EN 12697-15:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity

European Committee for Standardization (CEN), Asphaltene detection method

EN 12697-42:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt
EN 12697-42:2021 Bituminous mixtures - Test methods - Part 42: Amount of foreign matter in reclaimed asphalt
EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
EN 12697-6:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
EN 12697-29:2002 Bituminous mixtures - Test methods for hot mix asphalt - Part 29: Determination of the dimensions of bituminous specimen
EN 12697-36:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement
EN 12697-11:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen
EN 12697-11:2003 Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the affinity between aggregate and bitumen
EN 13587:2016 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
EN 12697-12:2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens
EN 12697-12:2003 Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens
EN 12697-12:2018 Bituminous mixtures - Test methods - Part 12: Determination of the water sensitivity of bituminous specimens
EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts
prEN 12697-36-2020 Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement
EN 12697-8:2003 Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens
EN 12697-23:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens
EN 12697-23:2017 Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens
EN 12697-39:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition
EN 12697-7:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays
EN 12697-13:2017 Bituminous mixtures - Test methods - Part 13: Temperature measurement
prEN 12697-47-2021 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
EN 12697-47:2023 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
EN 12697-9:2002 Bituminous Mixtures Test Methods for Hot Mix Asphalt - Part 9: Determination of the Reference Density
EN 12697-5:2009 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
EN 12697-2:2015 Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
EN 12697-49:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 49: Determination of friction after polishing
EN 12697-7:2002 Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays
EN 12697-15:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity

Standard Association of Australia （SAA）, Asphaltene detection method

AS/NZS 2891.9.3:2014
AS 2341.15:2023 Methods of testing bitumen and related roadmaking products, Method 15: Distillation of cutback bitumen
AS/NZS 2341.20:2016 Methods of testing bitumen and related roadmaking products, Method 20: Determination of sieve residue for bituminous materials
AS/NZS 2891.7.1:2015
AS 2341.16:1994 Methods of testing bitumen and related roadmaking products - Determination of flashpoint of cutback bitumen
AS 2341.17:1992 Methods of testing bitumen and related roadmaking products - Determination of distillation properties of tar
AS 2341.14:1992 Methods of testing bitumen and related roadmaking products - Determination of flashpoint of residual bitumen
AS 2341.32:2008(R2013)
AS 2341.15:1994 Methods of testing bitumen and roadmaking products - Distillation of cutback bitumen
AS 2341.14:2013
AS 2891.2.1:1995 Methods of sampling and testing asphalt - Sample preparation - Mixing, quartering and conditioning of asphalt in the laboratory
AS 2891.7.2:1993 Methods of sampling and testig asphalt Method 7.2:Determination of maximum density of asphalt - Trichloroethane displacement method
AS/NZS 2891.13.1:2013
AS/NZS 2891.14.5:1999 Methods of sampling and testing asphalt - Field density tests - Density ratio of compacted asphalt
AS/NZS 2891.9.2:2014
AS 2341.30:2021 Methods of testing bitumen and related roadmaking products, Method 30: Recovery of residue from bituminous emulsion
AS 2341.19:1992 Methods of testing bitumen and related roadmaking products - Determination of matter insoluble in quinoline for tar
AS 2341.32:2008 Methods of testing bitumen and related roadmaking products - Determination of pH of bituminous emulsions
AS/NZS 2891.9.1:2014
AS/NZS 2891.7.3:2014
AS/NZS 2891.2.1:2014
AS/NZS 2341.27:1996 Methods of testing bitumen and related roadmaking products Method 27: Determination of sedimentation
AS 2341.27:2022 Methods of testing bitumen and related roadmaking products, Method 27: Determination of sedimentation
AS 2891.8:2005 Methods of sampling and testing asphalt - Voids and density relationships for compacted asphalt mixes
AS 2341.26:2020 Methods of testing bitumen and related roadmaking products, Method 26: Determination of sieve residue

AT-ON, Asphaltene detection method

ONORM C 9219-1995 Bitumen - Testing - Elastic recovery of modified bitumen (ductilometer method)
OENORM EN 12697-36-2021 Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement
OENORM EN 12697-47-2021 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts

German Institute for Standardization, Asphaltene detection method

DIN EN 12697-36:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Method for the determination of the thickness of a bituminous pavement; German version EN 12697-36:2003
DIN EN 13589:2018-08 Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method; German version EN 13589:2018
DIN EN 16849:2016-12 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance; German version EN 16849:2016
DIN EN 12697-6:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens; German version EN 12697-6:2003+A1:2007
DIN EN 13587:2017-02 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method; German version EN 13587:2016
DIN EN 12697-47:2010-12 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts; German version EN 12697-47:2010 / Note: To be replaced by DIN EN 12697-47 (2021-10).
DIN EN 12697-12:2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens; English version of DIN EN 12697-12:2008-10
DIN EN 12697-36:2022 Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement
DIN EN 12697-29:2020 Bituminous mixtures - Test methods - Part 29: Determination of the dimensions of a bituminous specimen
DIN EN 12697-29:2020-08 Bituminous mixtures - Test methods - Part 29: Determination of the dimensions of a bituminous specimen; German version EN 12697-29:2020
DIN EN 12697-36:2020 Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement; German and English version prEN 12697-36:2020
DIN EN 12697-36:2022-06 Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement; German version EN 12697-36:2022
DIN EN 12697-11:2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen; English version of DIN EN 12697-11:2005
DIN EN 12697-8:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of the air voids content of bituminous specimen; German version EN 12697-8:2003
DIN EN 12697-2:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution (includes Amendment A1:2007); English version of DIN EN 12697-2:2007-11
DIN EN 12697-12:2018 Bituminous mixtures - Test methods - Part 12: Determination of the water sensitivity of bituminous specimens
DIN EN 12697-6:2020 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
DIN EN 12697-8:2019 Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of bituminous specimens
DIN EN 12697-47:2021-10 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts; German and English version prEN 12697-47:2021 / Note: Date of issue 2021-09-03*Intended as replacement for DIN EN 12697-47 (2010-12).
DIN EN 12697-6:2020-05 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens; German version EN 12697-6:2020
DIN EN 12697-8:2019-03 Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of bituminous specimens; German version EN 12697-8:2018
DIN EN 12697-12:2018-10 Bituminous mixtures - Test methods - Part 12: Determination of the water sensitivity of bituminous specimens; German version EN 12697-12:2018
DIN EN 12697-23:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens; German version EN 12697-23:2003
DIN EN 12697-5:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density; German version EN 12697-5:2002+A1:2007
DIN EN 12697-29:2002 Bituminous mixtures - Test method for hot mix asphalt - Part 29: Determination of the dimensions of bituminous specimen; German version EN 12697-29:2002
DIN EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens; German version EN 12697-6:2012
DIN EN 12697-11:2020 Bituminous mixtures - Test methods - Part 11: Determination of the affinity between aggregate and bitumen
DIN EN 12697-23:2018 Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens
DIN EN 12697-11:2020-05 Bituminous mixtures - Test methods - Part 11: Determination of the affinity between aggregate and bitumen; German version EN 12697-11:2020
DIN EN 12697-23:2018-02 Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens; German version EN 12697-23:2017
DIN EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts; German version EN 12697-47:2010
DIN 52006-3:2006 Bitumen and bituminous binders - Test methods for the determination of the effect of water on binder coatings - Part 3: Fluxed bitumen binder coating
DIN 52006-1:2006 Bitumen and bituminous binders - Test methods for the determination of the effect of water on binder coatings - Part 1: Bitumen emulsion binder coating
DIN EN 12697-15:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity; German version EN 12697-15:2003

CEN - European Committee for Standardization, Asphaltene detection method

EN 12697-6:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens (Incorporates Amendment A1: 2007)
PREN 16849-2015 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
EN 12697-11:2005 Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the affinity between aggregate and bitumen
PREN 12697-29-2018 Bituminous mixtures - Test methods - Part 29: Determination of the dimensions of a bituminous specimen
EN 12697-8:2018 Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of bituminous specimens
EN 12697-39:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition
PREN 12697-6-2018 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
EN 12697-2:2015/PRA1:2017 Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
PREN 12697-11-2018 Bituminous mixtures - Test methods - Part 11: Determination of the affinity between aggregate and bitumen

NZ-SNZ, Asphaltene detection method

AS/NZS 2341.20:1998 Methods of Testing Bitumen and Related Roadmaking Products Method 20: Determination of Sieve Residue for Bituminous Materials
AS/NZS 2341.30:1996 Methods of Testing Bitumen and Related Roadmaking Products Method 30: Recovery of Residue from Bituminous Emulsion
AS/NZS 2341.27:2008 Methods of testing bitumen and related roadmaking products Method 27: Determination of sedimentation
AS/NZS 2341.26:2002 Methods of Testing Bitumen and Related Roadmaking Products Method 26: Determination of Sieve Residue

American Society for Testing and Materials (ASTM), Asphaltene detection method

ASTM D6307-10 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
ASTM D4125/D4125M-21 Standard Test Methods for Asphalt Content of Asphalt Mixtures by the Nuclear Method
ASTM D4125/D4125M-10(2016) Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
ASTM D6307-98 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
ASTM D6307-05 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
ASTM D6307-04 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
ASTM D4125/D4125M-10 Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
ASTM D6307-16 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method
ASTM D6307-19 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method
ASTM D4125-05 Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
ASTM D2170-01a Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
ASTM D2170-01 Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
ASTM D2170-95 Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
ASTM D2042-01 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
ASTM D2042-97 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
ASTM D2042-09 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
ASTM D2042-15 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
ASTM D6140-00(2005) Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
ASTM D6140-97 Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
ASTM D6140-00(2009) Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
ASTM D6140-22 Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
ASTM D244-09(2017) Standard Test Methods and Practices for Emulsified Asphalts
ASTM D6140-00(2014) Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
ASTM D7157-12 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)
ASTM D4893-94(2004) Standard Test Method for Determination of Pitch Volatility
ASTM D6937-04 Standard Test Method for Determining Density of Emulsified Asphalt
ASTM D6937-08 Standard Test Method for Determining Density of Emulsified Asphalt
ASTM D6937-16 Standard Test Method for Determining Density of Emulsified Asphalt
ASTM D4715-98(2017) Standard Test Method for Coking Value of Tar and Pitch (Alcan)
ASTM D5147/D5147M-11 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
ASTM D5147/D5147M-11a Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
ASTM D1074-96 Standard Test Method for Compressive Strength of Bituminous Mixtures
ASTM D1074-02 Standard Test Method for Compressive Strength of Bituminous Mixtures
ASTM D8188-18 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)

ES-UNE, Asphaltene detection method

UNE-EN 16849:2017 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
UNE-EN 12697-36:2023 Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement
UNE-EN 12697-29:2022 Bituminous mixtures - Test methods - Part 29: Determination of the dimensions of a bituminous specimen
UNE-EN 12697-6:2022 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
UNE-EN 12697-12:2019 Bituminous mixtures - Test methods - Part 12: Determination of the water sensitivity of bituminous specimens
UNE-EN 12697-8:2020 Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of bituminous specimens
UNE-EN 12697-55:2022 Bituminous mixtures - Test methods - Part 55: Organoleptic assessment of mixtures with bitumen emulsion
UNE-EN 12697-11:2022 Bituminous mixtures - Test methods - Part 11: Determination of the affinity between aggregate and bitumen
UNE-EN 12697-23:2018 Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Asphaltene detection method

GB/T 3071-1982 Method for the determination of the true specific gravity of pitch coke
GB/T 8727-1988 Method for determination of coking value of coal pitch
GB/T 8727-2008 Method for determination of coking value of coal pitch products

Professional Standard - Ferrous Metallurgy, Asphaltene detection method

YB/T 5300-2006 Method for determination of true specific gravity of pitch coke
YB/T 5300-2009 Method for determination of true specific gravity of pitch coke

Danish Standards Foundation, Asphaltene detection method

DS/EN 12697-36:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement
DS/EN 12697-29:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 29: Determination of the dimensions of bituminous specimen
DS/EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts
DS/EN 12697-8:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens
DS/EN 12697-12:2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens
DS/EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
DS/EN 12697-23:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens
DS/EN 12697-11:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen
DS/EN 12697-13:2000 Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement
DS/EN 12697-13/AC:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement
DS/EN 12697-7:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays
DS/EN 12697-2+A1:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution
DS/EN 12697-5/AC:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
DS/EN 12697-5:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
DS/EN 12697-15:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity

Lithuanian Standards Office , Asphaltene detection method

LST EN 12697-29-2003 Bituminous mixtures - Test method for hot mix asphalt - Part 29: Determination of the dimensions of a bituminous specimen
LST EN 12697-36-2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement
LST EN 12697-8-2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens
LST EN 12697-12-2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens
LST EN 12697-47-2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts
LST EN 12697-6-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
LST EN 12606-2-2000 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method of extraction
LST 1362.23-1996 Asphalt concrete mixtures and asphalt concrete for road construction. Testing methods. Determination of binding of bitumen with mineral aggregates
LST EN 12697-23-2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens
LST EN 12697-11-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen
LST EN 12697-13+AC-2002 Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement
LST EN 12697-7-2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays
LST EN 12697-2+A1-2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution
LST EN 12697-5-2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
LST EN 12697-5-2010/AC-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
LST EN 12697-15-2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity

RO-ASRO, Asphaltene detection method

STAS 1338/2-1987 Road works ASPHALT MIXTURES AND HOT BITUMINOUS PAVEMENTS Methods for determination and test

PL-PKN, Asphaltene detection method

PN-EN 12697-29-2020-12 E Bituminous mixtures -- Test methods -- Part 29: Determination of the dimensions of a bituminous specimen

TR-TSE, Asphaltene detection method

TS 124-1964 STANDARD METHODS OF TEST FOR VVATER ?N BITUM?NOUS MATERIALS

TH-TISI, Asphaltene detection method

TIS 1203-1993 Standard test method for solubility of bituminous meterials in trichloroethylene

GOSTR, Asphaltene detection method

GOST R 58406.5-2020 Automobile roads of general use. Asphalt mixtures and asphalt. Method for determination of abrasion

Professional Standard - Nuclear Industry, Asphaltene detection method

EJ/T 693-2007 Determination for age of pitchblende and uraninite
EJ/T 693-1992 Age determination method of pitchblende and crystalline uranium ore

Shanxi Provincial Standard of the People's Republic of China, Asphaltene detection method

DB14/T 1715-2018 Technical requirements and testing methods of anti-rutting agent for highway asphalt mixture

Liaoning Provincial Standard of the People's Republic of China, Asphaltene detection method

DB21/T 2249-2014 On-the-spot rapid detection method of seam peel strength of asphalt waterproof membrane

未注明发布机构, Asphaltene detection method

BS 598-107:2004(2006) Sampling and examination of bituminous mixtures for roads and other paved areas — Part 107 : Method of test for the determination of the composition of design surface course rolled asphalt