ZH
RU
ES
Detection wavelength peak
Detection wavelength peak, Total:500 items.
In the international standard classification, Detection wavelength peak involves: Railway engineering in general, Construction of railways, Thermodynamics and temperature measurements, Optoelectronics. Laser equipment, Optics and optical measurements, Fibre optic communications, Semiconductor devices, Electricity. Magnetism. Electrical and magnetic measurements, Non-destructive testing, Testing of metals, Iron and steel products, Fuels, Integrated circuits. Microelectronics, Analytical chemistry, Telecommunication systems, Vocabularies, Lubricants, industrial oils and related products, Non-ferrous metals, Welding, brazing and soldering, Metrology and measurement in general, Astronomy. Geodesy. Geography, Medical equipment, Construction equipment, Protection against crime, Petroleum products in general, Special measuring equipment for use in telecommunications, Equipment for petroleum and natural gas industries, Valves, Medical sciences and health care facilities in general, Petroleum, petroleum products and natural gas handling equipment, Equipment for entertainment, Optical equipment, Organic chemicals, Radiocommunications, Transport, Mining equipment, Air quality, Elements of buildings, Nuclear energy engineering, Radiation measurements, Linear and angular measurements, Inorganic chemicals, Measurement of volume, mass, density, viscosity, Construction of waterways and ports, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Audio, video and audiovisual engineering, Acoustics and acoustic measurements, Protective equipment.
Professional Standard - Railway, Detection wavelength peak
Group Standards of the People's Republic of China, Detection wavelength peak
- T/GDCKCJH 053-2021 Temperature performance requirements and test method for tunnel furnace of reflow soldering & wave soldering
- T/ZKJXX 00032-2023 Technical requirements and test methods for long-wave receivers
- T/GDC 172-2022 Lifewave health parameter detector
- T/CSTM 00666-2023 Non-destructive testing –Steel products –Ultrasonic testing method for steel ingot
- T/JSQA 164-2023 Code for on-site inspection of engineering pile length
- T/CITSA 13-2021 Traffic incident detection-technical specification for microwave traffic incident detector
- T/CSTM 00697-2023 Non-destructive testing – Ultrasonic testing –Ultrasonic testing method for weld overlay of wellhead and tree products
Professional Standard - Electron, Detection wavelength peak
- SJ 2355.7-1983 Method of measurement for peak emission wavelength and spectral radiation bandwidth of light-emitting devices
- SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width
- SJ/T 31333-1994 Requirements of readiness and methods of inspection and assessment for automatic annular wire crest welders
- SJ/T 2658.12-2015 Measuring method for semiconductor infrared-emitting diode.Part 12: Peak-emission wavelength and spectral radiant bandwidth
National Metrological Verification Regulations of the People's Republic of China, Detection wavelength peak
- JJG 963-2001 Verification Regulation of Optical Wavelength Counters in Telecommunication
- JJG 348-1984 Verification Regulation of Resonance Type Wavemeter
- JJG 990-2004 Acoustic Detector
- JJG 810-1993 Verification Regulation for Wavelength Dispersive X-Ray Fluorescence Spectrometers
- JJG(石油) 21-1996 Verfication Regulation of Geophone Tester
- JJG 55-1984 Verification Regulation of Horizontal Metroscope
- JJG 281-1981 Verification Regulation of Waveguide Slotted Line
- JJG(海洋) 05-2003 Verification Regulations for Acoustic Wave Meter
- JJG 928-1998 Verification Regulation of Utrasonic Ranger
- JJG 403-1986 Verification Regulation of Ultrasonic Thickness Gauge
- JJG 121-1990 Verification Regulation of Video Noise Meter
- JJG(邮电) 029-1994 Verification Regulations for Microwave Test Receivers
- JJG(邮电) 022-1994 Specification for verification of microwave relay tester
- JJG 764-1992 Verification Regulation of Vertical Laser Metroscope
- JJG(铁道) 136-1992 Verification rules for axle full length measuring ruler
- JJG(纺织) 056-1993 Verification Regulations for Wire Linear Length Measuring Instrument
- JJG(交通) 027-2015 Water Transport Engineering.Nonmetal Ultrasonic Detector
- JJG(交通) 027-2004 Water Transport Engineering-Nonmetal Ultrasonic Detector
- JJG(邮电) 003-1989 Specification for verification of ME62A model microwave testing devices
- JJG 027-2015 Non-metallic acoustic wave detector for water transport engineering
- JJG(烟草) 28-2010 Verification regulations for microwave cigarette quality inspection system for cigarette making machines
- JJG(烟草)28-2010 Verification regulations for microwave cigarette quality inspection system for cigarette making machines
UNKNOWN, Detection wavelength peak
- GB/T 32211-2015 Test Method for Variable Wavelength Photometric Detectors for Liquid Chromatography
- GB/T 32211-2015 Test Method for Variable Wavelength Photometric Detectors for Liquid Chromatography
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Detection wavelength peak
- GB/T 32212-2015 Standard practice for testing fixed-wavelength photometric detectors used in liquid chromatography
- GB/T 42972-2023 Microwave circuit detector test method
- GB/T 31211-2014 Non-destructive testing.Ultrasonic guided wave testing.General principle
- GB/T 23904-2009 Non-destructive testing.Test method for ultrasonic testing by surface wave
- GB/T 23905-2009(英文版) Non destructive testing Blocks for ultrasonic testing
- GB/T 2523-2022 Measuring method of surface roughness, peak count and waviness for cold-rolled metal sheet and strip
- GB/T 28704-2012 Non-destructive testing.Test method for ultrasonic guided wave testing based on magnetostrictive effects
- GB/T 15489.3-1995 Colour filter glass test methods Temperatrue Coefficient of sharp cut wavelength
- GB/T 13255.5-1991 Caprolactam for industrial use--Determination of absorbance at a wavelength of 290nm
- GB/T 26771-2011 The setting specification for microwave traffic detector
- GB/T 24981.1-2010 Test methods of long afterglow phosphors activated by rare earths.Part 1:Determination of emission dominantpeak and chromaticity coordinates
- GB/T 28072-2011(英文版) Detection and identification of Alternaria gaisen Nagano
- GB/T 23908-2009 Non-destructive testing.Practice for ultrasonic pulse-echo straight-beam testing by the contact method
- GB/T 23912-2009 Non-destructive testing.Practice for immersed ultrasonic testing by the reflection method using pulsed longitudinal waves
- GB/T 32073-2015 Non-destructive testing.Test method for measuring residual stress using ultrasonic critical refracted longitudinal wave
工业和信息化部, Detection wavelength peak
- YD/T 3128-2016 Fiber Bragg grating based on wavelength detection for communication
- YD/T 4113-2022 Wavelength Switched Optical Network (WSON) Test Method
- JB/T 4008-2020 Recommended practice for immersed ultrasonic testing by the reflection method using pulsed longitudinal waves
- JB/T 4009-2020 Non-destructive testing contact ultrasonic longitudinal wave pulse echo detection and evaluation method of discontinuity
- YS/T 1103-2016 Ultrasonic (transverse wave) detection method for copper and copper alloy pipes
- YD/T 3917-2021 Access network equipment testing method Wavelength routing method WDM-PON
SE-SIS, Detection wavelength peak
British Standards Institution (BSI), Detection wavelength peak
- BS 6647:1985 Guide to oscilloscopes and peak voltmeters for impulse tests
- BS EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments. Michelson interferometer single wavelength meters
- BS 9690-2:2011 Non-destructive testing. Guided wave testing. Basic requirements for guided wave testing of pipes, pipelines and structural tubulars
- BS EN 15317:2013 Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment
- BS ISO 18211:2016 Non-destructive testing. Long-range inspection of above-ground pipelines and plant piping using guided wave testing with axial propagation
- BS EN ISO 16810:2014 Non-destructive testing. Ultrasonic testing. General principles
- BS EN ISO 16823:2014 Non-destructive testing. Ultrasonic testing. Transmission technique
- BS EN IEC 60793-1-44:2023 Optical fibres - Measurement methods and test procedures. Cut-off wavelength
- BS 9690-1:2011 Non-destructive testing. Guided wave testing. General guidance and principles
- BS EN 14127:2011 Non-destructive testing. Ultrasonic thickness measurement
- BS EN ISO 2400:2012 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 1
- BS EN ISO 16826:2014 Non-destructive testing. Ultrasonic testing. Examination for discontinuities perpendicular to the surface
- BS EN 60793-1-44:2002 Optical fibres - Measurement methods and test procedures - Cut-off wavelength
- BS EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments. Optical spectrum analyzers
- BS EN ISO 16811:2014 Non-destructive testing. Ultrasonic testing. Sensitivity and range setting
- BS EN 61300-3-7:2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Wavelength dependence of attenuation and return loss of single mode components
- BS EN ISO 11666:2011 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
- BS EN ISO 11666:2010 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
- 22/30439260 DC BS ISO 4773. Non-destructive testing. Method. Ultrasonic guided wave inspection using phased array technique
- BS EN IEC 61300-3-7:2021 Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Wavelength dependence of attenuation and return loss of single mode components
- BS EN 14127:2004 Non-destructive testing - Ultrasonic thickness measurement
- BS 5343-2:1991 Gas detector tubes - Specification for long term gas detector tubes
- BS EN ISO 16827:2014 Non-destructive testing. Ultrasonic testing. Characterization and sizing of discontinuities
- BS EN 60793-1-44:2011 Optical fibres. Measurement methods and test procedures. Cut-off wavelength
- 22/30437356 DC BS EN ISO 7963. Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
- BS EN ISO 11666:2018 Tracked Changes. Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
- BS EN ISO 17640:2017 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
- BS EN ISO 17640:2010 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
- BS ISO 7059:2023 Caprolactam for industrial use. Determination of absorbance at a wavelength of 290 nm
- BS EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- BS EN 12668-3:2013 Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Combined equipment
- BS ISO 19675:2017 Non-destructive testing. Ultrasonic testing. Specification for a calibration block for phased array testing (PAUT)
IN-BIS, Detection wavelength peak
Professional Standard - Machinery, Detection wavelength peak
- JB/T 9358-1999 Test method for fixed wavelength (254nm) UV detector used in liquid chromatography
- JB/T 10814-2007 Non-destructive testing.Ultrasonic testing by surface wave
- JB/T 11604-2013 Non-destructive testing instruments.Ultrasonic thickness gauge
- JB/T 6903-2008 Methods for ultrasonic examination of steel forgings for valves
SAE - SAE International, Detection wavelength peak
Society of Automotive Engineers (SAE), Detection wavelength peak
Professional Standard - Military and Civilian Products, Detection wavelength peak
- WJ 2278-1995 Regulations for verification of interference filters for wavelength verification of spectrophotometers
- WJ 2279-1995 Verification rules for wavelength standard device of low-pressure quartz mercury lamp
- WJ 2387-1997 Verification Regulations for Microwave and Millimeter Wave Phase Noise Test System
- WJ 2589-2002 Ultrasonic Testing of Large Caliber Projectiles
American Society for Testing and Materials (ASTM), Detection wavelength peak
- ASTM E685-93 Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
- ASTM E685-93(2013) Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
- ASTM E685-93(2021) Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography
- ASTM E1657-98 Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography
- ASTM E1657-98(2001) Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography
- ASTM E1657-98(2019) Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography
- ASTM E388-04(2009) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers ,
- ASTM E1685-20 Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
- ASTM G178-16 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
International Organization for Standardization (ISO), Detection wavelength peak
- ISO 16831:2012 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- ISO 16810:2012 Non-destructive testing - Ultrasonic testing - General principles
- ISO/CD 5577:2023 Non-destructive testing — Ultrasonic testing — Vocabulary
- ISO/FDIS 4773 Non-destructive testing — Ultrasonic guided wave testing using the phased array technique
- ISO/DIS 4773 Non-destructive testing — Ultrasonic guided wave testing using the phased array technique
- ISO 4773:2011 Non-destructive testing — Ultrasonic guided-wave testing using the phased-array technique
- ISO/CD 16831:2023 Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
- ISO 18211:2016 Non-destructive testing - Long-range inspection of above-ground pipelines and plant piping using guided wave testing with axial propagation
- ISO 23243:2020 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary
- ISO/CD 16810:2023 Non-destructive testing — Ultrasonic testing — General principles
- ISO/CD 16823:2011 Non-destructive testing — Ultrasonic testing — Through-transmission technique
- ISO 4773:2023 Non-destructive testing — Ultrasonic guided-wave testing using the phased-array technique
- ISO 16809:2012 Non-destructive testing - Ultrasonic thickness measurement
- ISO 16809:2017 Non-destructive testing - Ultrasonic thickness measurement
- ISO/CD TR 23867 Ultrasonic testing of hardmetals
- ISO 16811:2012 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
- ISO 7963:2022 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
- ISO/CD 16811:2011 Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
- ISO/CD 16826:2011 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
- ISO/CD 16946 Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block
- ISO 24647:2023 Non-destructive testing — Robotic ultrasonic test systems — General requirements
- ISO/DIS 16946:2023 Non-destructive testing — Ultrasonic testing — Specification for a step wedge calibration block
- ISO 7963:2006 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
- ISO/CD 16827:2023 Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
- ISO 17405:2022 Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion
- ISO/DIS 7059 Caprolactam for industrial use — Determination of absorbance at a wavelength of 290 nm
- ISO 23279:2017 Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
- ISO 7059:1982 Caprolactam for industrial use; Determination of absorbance at a wavelength of 290 nm
- ISO 7059:2023 Caprolactam for industrial use — Determination of absorbance at a wavelength of 290 nm
- ISO/PRF 7059:2023 Caprolactam for industrial use — Determination of absorbance at a wavelength of 290 nm
- ISO 16827:2012 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
Korean Agency for Technology and Standards (KATS), Detection wavelength peak
- KS B ISO 12710:2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
- KS B ISO 16810:2019 Non-destructive testing ― Ultrasonic testing ― General principles
- KS B ISO 5577:2022 Non-destructive testing — Ultrasonic testing — Vocabulary
- KS B ISO 16823:2022 Non-destructive testing — Ultrasonic testing —Transmission technique
- KS D 0075-2014(2019) Ultrasonic inspection of titanium pipes and tubes
- KS B ISO 11666:2019 Non-destructive testing of welds ― Ultrasonic testing ― Acceptance levels
- KS B ISO 17640:2019 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
- KS D 0075-1994 Ultrasonic inspection of titanium pipes and tubes
- KS D 0075-2014 Ultrasonic inspection of titanium pipes and tubes
- KS B ISO 2400:2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
- KS B 0831-2001(2021) Standard test blocks for ultrasonic testing
- KS C IEC 61300-3-7:2008 Fibre optic interconnecting devices and passive components－Basic test and measurement procedures－Part 3-7：Examinations and measurements－Wavelength dependence of attenuation and return loss
- KS B ISO 16826:2022 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
- KS D 0252-1994 Ultrasonic examination for arc welded steel pipes
- KS D 0252-2019 Ultrasonic testing for the detection of longitudinal and/or transverse imperfections in welded seam of arc welded steel pipes
- KS C IEC 61300-3-7-2008(2018) Fibre optic interconnecting devices and passive components－Basic test and measurement procedures－Part 3-7：Examinations and measurements－Wavelength dependence of attenuation and return loss
- KS B ISO 10375:2018 Non-destructive testing — Ultrasonic inspection — Characterization of search unit and sound field
- KS B ISO 16827:2022 Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
- KS B ISO 25902-2:2021 Titanium pipes and tubes — Non-destructive testing — Part 2: Ultrasonic testing for the detection of longitudinal imperfections
- KS C 3700-2007(2017) Partial discharge detectors with electromagnetic wave method
- KS B 0522-1994 Method of ultrasonic testing and classification of test results for T type welds in aluminium plates
- KS B ISO 23279-A:2019 Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
- KS E 4113-1996 Detector tube type carbon monoxide measuring instrunments(Length &##8211; of - stain)
- KS E 4113-1996(2011) Detector tube type carbon monoxide measuring instrunments(Length?of - stain)
KR-KS, Detection wavelength peak
- KS B ISO 12710-2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
- KS B ISO 16810-2019 Non-destructive testing ― Ultrasonic testing ― General principles
- KS B ISO 5577-2022 Non-destructive testing — Ultrasonic testing — Vocabulary
- KS B ISO 16823-2022 Non-destructive testing — Ultrasonic testing —Transmission technique
- KS B ISO 11666-2019 Non-destructive testing of welds ― Ultrasonic testing ― Acceptance levels
- KS B ISO 17640-2019 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
- KS B ISO 2400-2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
- KS B ISO 16826-2022 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
- KS B ISO 10375-2018 Non-destructive testing — Ultrasonic inspection — Characterization of search unit and sound field
- KS B ISO 16827-2022 Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
- KS B ISO 25902-2-2021 Titanium pipes and tubes — Non-destructive testing — Part 2: Ultrasonic testing for the detection of longitudinal imperfections
- KS B ISO 22825-2023 Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
- KS B ISO 23279-A-2019 Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
FI-SFS, Detection wavelength peak
Danish Standards Foundation, Detection wavelength peak
- DS 2333:1987 Non-destructive testing. Ultrasonic testing. Terminology
- DS/EN 10308:2002 Non destructive testing - Ultrasonic testing of steel bars
- DS/EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- DS/EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
- DS/EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters
- DS/EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
- DS/EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
- DS/EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
- DS/EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
- DS/EN 583-3:1998 Non destructive testing - Ultrasonic examination - Part 3: Transmission technique
- DS/EN ISO 23243:2020 Non-destructive testing – Ultrasonic testing with arrays – Vocabulary (ISO 23243:2020)
- DS/ISO 23243:2020 Non-destructive testing – Ultrasonic testing with arrays – Vocabulary
- DS/EN IEC 61300-3-7:2021 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-7: Examinations and measurements – Wavelength dependence of attenuation and return loss of single mode components
- DS/EN 61300-3-7:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components
- DS/EN ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds
- DS/EN 60793-1-44:2011 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
- DS/EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- DS/EN 583-1/A1:2004 Non-destructive testing - Ultrasonic examination - Part 1: General principles
- DS/EN 583-1:1999 Non-destructive testing - Ultrasonic examination - Part 1: General principles
- DS/EN 61300-3-5:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-5: Examinations and measurements - Wavelength dependence of attenuation
- DS/EN 1330-4:2010 Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing
Lithuanian Standards Office , Detection wavelength peak
- LST EN 10308-2002 Non destructive testing - Ultrasonic testing of steel bars
- LST EN 15317-2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- LST EN 14127-2011 Non-destructive testing - Ultrasonic thickness measurement
- LST EN 62129-2-2011 Calibration of wavelength/optical frequency measurement instruments -- Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011)
- LST EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012)
- LST EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)
- LST EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
- LST EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
- LST EN ISO 23243:2021 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)
- LST EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
- LST EN 583-3-2000 Non-destructive testing - Ultrasonic examination - Part 3: Transmission technique
- LST EN 583-1-2000 Non-destructive testing - Ultrasonic examination - Part 1: General principles
- LST EN 583-1-2000/A1-2004 Non-destructive testing - Ultrasonic examination - Part 1: General principles
- LST EN 13068-2-2001 Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices
- LST EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012)
- LST EN 1330-4-2010 Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing
AENOR, Detection wavelength peak
- UNE-EN 10308:2002 Non destructive testing - Ultrasonic testing of steel bars
- UNE-EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- UNE-EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
- UNE-EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017)
- UNE-EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012)
- UNE-EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012)
- UNE-EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)
- UNE-EN 61300-3-7:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components
- UNE-EN ISO 7963:2011 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
- UNE-EN ISO 2400:2013 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
- UNE-EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
- UNE-EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012)
- UNE-EN ISO 16826:2014 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012)
- UNE-EN ISO 22825:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012)
- UNE-EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017)
Association Francaise de Normalisation, Detection wavelength peak
- NF A09-017*NF EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary
- NF EN ISO 5577:2017 Essais non destructifs - Contrôle par ultrasons - Vocabulaire
- NF C93-846-2*NF EN 62129-2:2011 Calibration of wavelength/optical frequency measurement insturments - Part 2 : Michelson interferometer single wavelength meters.
- NF A09-322:1985 Non destructive testing - Ultrasonic testing - Specifications of ultrasonic probes for industrial use
- NF A09-332*NF EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles
- NF A09-334*NF EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique
- NF A09-023*NF EN ISO 23243:2020 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary
- NF EN ISO 16823:2014 Essais non destructifs - Contrôle par ultrasons - Technique par transmission
- NF EN ISO 16810:2014 Essais non destructifs - Contrôle par ultrasons - Principes généraux
- NF EN ISO 16809:2019 Essais non destructifs - Mesurage de l'épaisseur par ultrasons
- NF P18-511-3*NF EN 14488-3:2006 Testing sprayed concrete - Part 3 : flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
- NF EN 50130-5:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
- NF EN 302998-1:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
- NF EN 62129-2:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
- NF DTU 40.37:2011 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 2 : appareils de mesure de longueur d'onde unique à interféromètre de Michelson
- NF EN 15317:2013 Essais non destructifs - Contrôle ultrasonore - Caractérisation et vérification des appareils de mesure de l'épaisseur par ultrasons
- NF A09-323:1987 Non-destructive testing - Ultrasonic testing - Methods for specifying ultrasonic probes for industrial use
- NF EN ISO 2400:2012 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 1
- NF A09-018*NF ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
- A09-325:1987 Non-destructive testing. Ultrasonic testing. Acoustic beams. Generalities.
- NF A09-321:1988 Non destructive testing. Ultrasonic testing. Methods for specifying ultrasonic apparatus.
- NF C48-230:1987 Intrusion detection - Ultrasound motion detectors - Specific standard.
- NF A89-521*NF EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
- NF EN ISO 7963:2022 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 2
- NF A89-520*NF EN ISO 17640:2018 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
- NF A04-307:1981 IRON AND STEEL. ULTRASONIC INTERNAL DEFECT DETECTION IN LONG PRODUCTS EXCLUDING BEAMS,RAILS AND SIMILAR SECTION (MANUAL INSPECTION).
- NF A09-333*NF EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
- NF EN ISO 16946:2017 Essais non destructifs - Essais par ultrasons - Spécifications relatives aux blocs d'étalonnage à gradins
- NF A09-312*NF EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
- NF EN ISO 11666:2018 Essais non destructifs des assemblages soudés - Contrôle par ultrasons - Niveaux d'acceptation
- NF EN ISO 16811:2014 Essais non destructifs - Contrôle par ultrasons - Réglage de la sensibilité et de la base de temps
- NF C93-903-7*NF EN IEC 61300-3-7:2021 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7 : examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components
- NF C93-903-7*NF EN 61300-3-7:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7 : examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components
- NF A09-336*NF EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
- NF ISO 19675:2017 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage pour la technique multi-éléments
- NF A09-324:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment.
- NF EN ISO 16827:2014 Essais non destructifs - Contrôle par ultrasons - Caractérisation et dimensionnement des discontinuités
- NF A09-324*NF EN 15317:2013 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- NF EN ISO 17405:2022 Essais non destructifs - Contrôle par ultrasons - Technique d'essai des placages produits par soudage, laminage et explosion
- NF A09-320-1:2010 Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 1 : instruments.
- NF EN 60793-1-44:2012 Fibres optiques - Partie 1-44 : méthodes de mesure et procédures d'essai - Longueur d'onde de coupure
- NF A89-523:2012 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys.
- NF A89-523*NF EN ISO 22825:2017 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys
- NF EN ISO 23243:2020 Essais non destructifs - Contrôle à l'aide de réseaux ultrasonores - Vocabulaire
- NF A89-522*NF EN ISO 23279:2017 Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds
- NF EN ISO 16826:2014 Essais non destructifs - Contrôle par ultrasons - Contrôle des discontinuités perpendiculaires à la surface
European Committee for Standardization (CEN), Detection wavelength peak
- prEN ISO 5577 Non-destructive testing — Ultrasonic testing — Vocabulary
- EN 10308:2001 Non destructive testing - Ultrasonic testing of steel bars
- prEN ISO 16831 rev Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
- EN ISO 23243:2020 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)
- prEN ISO 16810 rev Non-destructive testing — Ultrasonic testing — General principles
- prEN ISO 16823 rev Non-destructive testing — Ultrasonic testing — Transmission technique
- EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles
- EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique
- prEN ISO 16811 rev Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
- prEN ISO 16826 rev Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
- prEN ISO 16946 rev Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
- EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
- EN ISO 7963:2022 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
- EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
- prEN ISO 16827 rev Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
- EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
- EN ISO 16827:2014 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
- EN 583-3:1997 Non-Destructive Testing - Ultrasonic Examination - Part 3: Transmission Technique
- EN 15317:2013 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
German Institute for Standardization, Detection wavelength peak
- DIN EN 10308:2002-03 Non-destructive testing - Ultrasonic testing of steel bars; German version EN 10308:2001
- DIN EN ISO 5577:2017-05 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017); German version EN ISO 5577:2017
- DIN 51440-1:2003 Testing of gasolines - Determination of phosphorus content - Part 1: Analysis by wavelength dispersive X-ray spectrometry (XRS)
- DIN EN 15317:2014-02 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version EN 15317:2013
- DIN EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012); German version EN ISO 16810:2014
- DIN EN ISO 16823:2014-07 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012); German version EN ISO 16823:2014
- DIN EN ISO 16810:2014-07 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012); German version EN ISO 16810:2014
- DIN EN ISO 16809:2020-02 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017); German version EN ISO 16809:2019
- DIN EN 62129-2:2012-03 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011); German version EN 62129-2:2011
- DIN 51391-2:1994 Testing of lubricants; determination of the content of additive elements; analysis by wavelengthdispersive X-ray spectrometry (XRS)
- DIN EN ISO 11666:2018-05 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018); German version EN ISO 11666:2018
- DIN EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012); German version EN ISO 16823:2014
- DIN EN ISO 7963:2023-02 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022); German version EN ISO 7963:2022
- DIN EN ISO 2400:2013-01 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012); German version EN ISO 2400:2012
- DIN EN 583-1:1998 Non-destructive testing - Ultrasonic examination - Part 1: General principles; German version EN 583-1:1998
- DIN EN ISO 16811:2014-06 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012); German version EN ISO 16811:2014
- DIN EN ISO 23243:2021-03 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020); German version EN ISO 23243:2020
- DIN EN ISO 17640:2019 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
- DIN EN ISO 16826:2014-06 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012); German version EN ISO 16826:2014
- DIN 51431-2:2004 Testing of lubricants - Determination of the magnesium content - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRF)
- DIN EN ISO 16946:2017-07 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017); German version EN ISO 16946:2017
- DIN EN ISO 22825:2018-02 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017); German version EN ISO 22825:2017
- DIN 51379-2:1990 Testing of lubricants; determination of molybdenum content of lubricating oils; analysis by wavelength dispersive X-ray spectrometry (XRS)
- DIN EN 62129-2:2012 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters (IEC 62129-2:2011); German version EN 62129-2:2011
- DIN 25702:1995 Shieldings for detectors for nuclide-specific activity measurements - Standard-systems with germanium detectors
- DIN EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
- DIN EN ISO 7963:2023 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
- DIN EN ISO 16827:2014-06 Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012); German version EN ISO 16827:2014
- DIN EN IEC 61300-3-7:2022-11 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components (IEC 61300-3-7:2021); German v...
- DIN EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version EN 15317:2013
- DIN EN 13068-2:2000-02 Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices; German version EN 13068-2:1999
- DIN 25450:1990 Ultrasonic equipment for manual testing
- DIN EN ISO 13588:2019-07 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019); German version EN ISO 13588:2019
- DIN EN 583-3:1997 Non-destructive testing - Ultrasonic testing - Part 3: Transmission technique; German version EN 583-3:1997
- DIN EN ISO 22825:2018 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)
- DIN EN ISO 17640:2019-02 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018); German version EN ISO 17640:2018
International Electrotechnical Commission (IEC), Detection wavelength peak
- IEC 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters
- IEC 61300-3-7:2000 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements; Wavelength dependence of attenuation and return loss
- IEC 61300-3-7:2004 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss
- IEC 60793-1-44:2023 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
PL-PKN, Detection wavelength peak
- PN T06561-1971 Microwave measuring instruments Cavity wavemeter General requirements and tests
- PN-EN ISO 17640-2019-01 P Non-destructive testing of welds -- Ultrasonic testing -- Techniques, testing levels, and assessment (ISO 17640:2018)
BE-NBN, Detection wavelength peak
Electronic Components, Assemblies and Materials Association, Detection wavelength peak
- ECA EIA-364-71C-2008 TP-71C Solder Wicking (Wave Solder Technique) Test Procedure for Electrical Connectors and Sockets
ECIA - Electronic Components Industry Association, Detection wavelength peak
- 364-71-1992 TP-71 Solder Wicking Test Procedure for Electrical Connectors/Sockets (Wave Solder Technique)
- EIA-364-71A-1999 TP-71A Solder Wicking (Wave Solder Technique) Test Procedure for Electrical Connectors and Sockets
- EIA-364-71C-2008 TP-71C Solder Wicking (Wave Solder Technique) Test Procedure for Electrical Connectors and Sockets
Professional Standard - Agriculture, Detection wavelength peak
- JJG(教委) 016-1996 Verification rules for wavelength dispersive X-ray fluorescence spectrometer
- JAP-096 The method of detection of elixir
RO-ASRO, Detection wavelength peak
- STAS R 12500/3-1987 Ultrasonic fault detection CHECKING LP METHODS IX SERVICE OF ULTRASONICFAULT DETECTORS
- STAS R 12500/2-1987 ULTRASONIC FAULT DETECTION CALIBRATION AND ADJUSTMENT OF ULTRASONIC FA DL DETECTORS
- STAS 9552-1987 Ultrasonic fault detection MANUAL EXAMINATION OF FUSE WELDING JOINTS
AR-IRAM, Detection wavelength peak
HU-MSZT, Detection wavelength peak
NO-SN, Detection wavelength peak
- NS 10210-1982 Non-destructive testing - Ultrasonic testing - Calibration block 1
IT-UNI, Detection wavelength peak
Indonesia Standards, Detection wavelength peak
Standard Association of Australia （SAA）, Detection wavelength peak
- AS ISO 16809:2020 Non-destructive testing — Ultrasonic thickness measurement
- AS 2452.3:2005 Non-destructive testing - Determination of thickness - Use of ultrasonic testing
- AS 2574:2000
- AS 2563:1996 Wavelength dispersive X-ray fluorescence spectrometers - Determination of precision
CENELEC - European Committee for Electrotechnical Standardization, Detection wavelength peak
- EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters
- EN 60793-1-44:2002 Optical Fibres Part 1-44: Measurement Methods and Test Procedures - Cut-Off Wavelength
- EN 61300-3-5:2001 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures Part 3-5: Examinations and Measurements - Wavelength Dependence of Attenuation
ES-UNE, Detection wavelength peak
- UNE-EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters (Endorsed by AENOR in October of 2011.)
- UNE-EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
- UNE-EN ISO 16809:2020 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
- UNE-EN ISO 23243:2022 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)
- UNE-EN ISO 17640:2019 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
- UNE-EN ISO 23279:2018 Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO 23279:2017)
- UNE-EN ISO 19285:2018 Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels (ISO 19285:2017)
- UNE-EN ISO 7963:2023 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
- UNE-EN 60793-1-44:2011 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength (Endorsed by AENOR in October of 2011.)
- EN IEC 60793-1-44:2023 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
- UNE-EN ISO 13588:2020 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
- UNE-EN ISO 22825:2018 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)
US-FCR, Detection wavelength peak
Taiwan Provincial Standard of the People's Republic of China, Detection wavelength peak
- CNS 14138-1998 Method of ultrasonic test for titanium pipes and tubes
- CNS 13342-1994 Glossary of Terms Related to Nondestructive Testing (Ultrasonic Testing Terms)
- CNS 14136-1998 Method of ultrasonic test for steel forgings
- CNS 11224-1991 Evaluation Characteristics of Pulse Echo Ultrasonic Testing System
- CNS 5253-1980 Carbon Monoxide Detector with Length-of-Stain Type Detector Tubes
- CNS 11401-1995 Method of Ultrasonic Test for Steel Butt Welds
- CNS 12618-2000 Method of Ultrasonic Test for the welds of Steel Structure
- CNS 13404-1994 Method of Ultrasonic Test for Arc Welded Steel Pipes
- CNS 12622-1989 Method of Ultrasonic Test for Large Firged Steel Shaft
- CNS 4120-1998 Type G standard test block for ultrasonic normal beam testing
- CNS 4122-1998 Type A1 standard test block for ultrasonic testing
- CNS 13806-1997 Method of Measurement for Emission Wavelength and Luminous Intensity of Epitaxial Wafers of Light Emitting Diodes
Military Standard of the People's Republic of China-General Armament Department, Detection wavelength peak
- GJB 593.1-1988 Non-destructive testing quality control specifications Ultrasonic longitudinal and transverse wave inspection
- GJB 9654-2019 Ultrasonic testing method of TaW12 alloy sheet
YU-JUS, Detection wavelength peak
- JUS F.S2.054-1977 Testing oftextiks. Determination ofshrink of filament yarns (Du Pont-test)
- JUS C.K6.037-1982 Testing of prestressing steels. Determination of the transmission length
未注明发布机构, Detection wavelength peak
- BS EN 1714:1998(2004) Non - destructive testing of welds — Ultrasonic testing of welded joints
- BS EN 583-1:1999(2008) Non - destructive testing — Ultrasonic examination — Part 1 : General principles
- BS EN 1712:1997(2004) Non - destructive testing of welds — Ultrasonic testing of welded joints — Acceptance levels
- DIN EN 1714:2002 Non-destructive testing of welded joints – ultrasonic testing of welded joints
- DIN EN 12668-1-A1:2004 Non-destructive testing – Characterization and verification of ultrasonic testing equipment – Part 1: Testing equipment
- JIS G 0801:2023 Ultrasonic testing of steel plates for pressure vessels
- BS EN 583-2:2001(2007) Non - destructive testing — Ultrasonic examination — Part 2 : Sensitivity and range setting
RU-GOST R, Detection wavelength peak
- GOST R 8.780-2012 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the energy, of the distribution of energy density, of the pulse duration and of the laser wavelength in the wavelength range from 0,3 to 2,0 µm
- GOST 8.197-2005 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring of the spectral radiance in spectral range from 0,04 to 0,25 ?
- GOST 8.197-1986 State system for ensuring the uniforming of measurements. State special standard and state verification schedule for means measuring spectral density of energy radiance of optical radiation in the wavelength range of 0,04-0,25 um
- GOST 22727-1988 Rolled sheet. Ultrasonic test methods
- GOST R ISO 16809-2015 Non-destructive testing. Ultrasonic testing. Thickness measurement
- GOST R ISO 16831-2016 Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment
- GOST 29115-1991 Detector sets of gamma radiation for spectrometry. Metods basic parameters measurement
Japanese Industrial Standards Committee (JISC), Detection wavelength peak
- JIS T 1205:2005 Ultrasound ophthalmic measuring system for the axial length
- JIS G 0584:2022 Ultrasonic examination for arc welded steel pipes
- JIS K 0804:1992 Gas detector tubes (Length-of-stain type)
- JIS Z 2354:1992 Method for measurement of ultrasonic attenuation coefficient of solid by pulse echo technique
Professional Standard - Construction Industry, Detection wavelength peak
Professional Standard - Public Safety Standards, Detection wavelength peak
- GA/T 1995-2022 Forensic Science Metal Examination Wavelength Dispersive X-ray Fluorescence Spectrometry
- GA/T 1654-2019 Forensic Science Paper Elemental Composition Examination Wavelength Dispersive X-ray Fluorescence Spectroscopy
CEN - European Committee for Standardization, Detection wavelength peak
- EN ISO 16809:2019 Non-destructive testing - Ultrasonic thickness measurement
- EN 14127:2004 Non-destructive testing - Ultrasonic thickness measurement
- EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
American National Standards Institute （ANSI), Detection wavelength peak
- ANSI/ASTM D2622:2005 Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
- ANSI/TIA/EIA 455-80B-1998 Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power
- ANSI S4.6-1982 Method of measuring recorded flux of magnetic sound records at medium wavelengths
国家市场监督管理总局、中国国家标准化管理委员会, Detection wavelength peak
- GB/T 38952-2020 Non-destructive testing—Testing method for measuring residual stress using bulk wave
- GB/T 34370.11-2020 Nondestructive testing of amusement equipments—Part 11: Ultrasonic guided wave testing
- GB/T 24981.1-2020 Test methods of rare earth long afterglow phosphors—Part 1: Determination of emission dominantpeak and chromaticity coordinates
- GB/T 39283-2020 Non-destructive testing—Testing method for surface-wave testing using electromagnetic acoustic transducer (EMAT) techniques
- GB/T 39282-2020 Non-destructive testing—Testing method for pulse-echo testing using electromagnetic acoustic transducer (EMAT) techniques
Professional Standard - Post and Telecommunication, Detection wavelength peak
- YD/T 592-1992 Test method for wavelength dispersion of mono-mode optical fiber - interference method
- YD/T 504-1991 Technical conditions for short-wave long optical time domain reflectoscopes
- YD/T 1527-2006 Technical requirements and test methods for optoelectronic(wavelength/mode)converter
- YD/T 1527-2013 Photoelectric (wavelength/mode) converter technical requirements and test methods
Professional Standard - Petroleum, Detection wavelength peak
IPC - Association Connecting Electronics Industries, Detection wavelength peak
U.S. Military Regulations and Norms, Detection wavelength peak
GB-REG, Detection wavelength peak
CZ-CSN, Detection wavelength peak
- CSN 05 1171-1983 Nondestructive testing. Methods of ultrasonic testing of welds
- CSN 36 7109-1984 Fixed broadcasting transmitters in the LW and MW bands, automated Principal parameters, generál technical requirements, methods of measurement
National Association of Pipe Fabricators (NAPF), Detection wavelength peak
Anhui Provincial Standard of the People's Republic of China, Detection wavelength peak
- DB34/T 728-2018 Inspection regulations for long-distance natural gas pipelines (direct inspection)
Professional Standard - Geology, Detection wavelength peak
国家煤矿安全监察局, Detection wavelength peak
National Metrological Technical Specifications of the People's Republic of China, Detection wavelength peak
- JJF(纺织) 01-1985 Verification method of Y301 type rough length measuring device
- JJF(纺织) 15-1985 Verification method of Y351 yarn length measuring machine
- JJF 1969-2022 Calibration Specification for Impact Elastic Wave Measurement Apparatus
AT-ON, Detection wavelength peak
CH-SNV, Detection wavelength peak
- SN EN ISO 23243:2021 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)
国家铁路局, Detection wavelength peak
- TB/T 3568.3-2021 Railway nondestructive testing materials Part 3: Ultrasonic testing probes
VN-TCVN, Detection wavelength peak
- TCVN 5115-2009 Non-destructive testing.Ultrasonic testing.Specification for calibration block No.2
TH-TISI, Detection wavelength peak
- TIS 2026-2000 Caprolactam for industrial use.determination of absorbance at a wavelength of 290 nm
European Committee for Electrotechnical Standardization（CENELEC）, Detection wavelength peak
- EN 60793-1-44:2011 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
Professional Standard - Traffic, Detection wavelength peak
- JT/T 576-2015 Water transport engineering.Nonmetal ultrasonic detector
- JT/T 576-2004 Water transport engineering.Nonmetal ultrasonic detector
BR-ABNT, Detection wavelength peak
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Detection wavelength peak
AWS - American Welding Society, Detection wavelength peak
- UEAW-1986 Handbook on the Ultrasonic Examination of Austenitic Welds
未注明发布机构, Detection wavelength peak
- BS EN 1714:1998(2004) Non - destructive testing of welds — Ultrasonic testing of welded joints
- BS EN 583-1:1999(2008) Non - destructive testing — Ultrasonic examination — Part 1 : General principles
- BS EN 1712:1997(2004) Non - destructive testing of welds — Ultrasonic testing of welded joints — Acceptance levels
- DIN EN 1714:2002 Non-destructive testing of welded joints – ultrasonic testing of welded joints
- DIN EN 12668-1-A1:2004 Non-destructive testing – Characterization and verification of ultrasonic testing equipment – Part 1: Testing equipment
- JIS G 0801:2023 Ultrasonic testing of steel plates for pressure vessels
- BS EN 583-2:2001(2007) Non - destructive testing — Ultrasonic examination — Part 2 : Sensitivity and range setting
Institute of Electrical and Electronics Engineers (IEEE), Detection wavelength peak