ZH
RU
ES
National standard
National standard, Total:96 items.
In the international standard classification, National standard involves: Materials for aerospace construction, Rubber, Electrical accessories, Paints and varnishes, Rubber and plastics products, Construction materials, Wood-based panels, Aerospace fluid systems and components, Optics and optical measurements, Lighting, Road engineering, Quality, Metrology and measurement in general, Lamps and related equipment, General methods of tests and analysis for food products, Mechanical testing, Radiation measurements, Electromagnetic compatibility (EMC), Domestic, commercial and industrial heating appliances, Radiocommunications.
American National Standards Institute （ANSI), National standard
- ANSI/ISEA 107-2020 American National Standard for High-Visibility Safety Apparel
- BS EN ISO 3995:2023 Metallic powders. Determination of green strength by transverse rupture of rectangular compacts (British Standard)
- ANSI/IEEE C12.7:1993 American National Standard Requirements for Watthour Meter Sockets
- BS EN ISO 180:2023 Plastics. Determination of Izod impact strength (British Standard)
- BS ISO 7972:2023 Adhesives. Absorption of water into an adhesive layer using an open-faced specimen and determination of shear strength by secondary bonding (British Standard)
- BS EN ISO 20785-3:2023 Dosimetry for exposures to cosmic radiation in civilian aircraft Measurements at aviation altitudes (British Standard)
- BS ISO 24087:2023 Rubber, vulcanized. Determination of the glass transition temperature and enthalpy by differential scanning calorimetry (British Standard)
- ANSI/NCSL Z540.2-1997 American National Standard for Expressing Uncertainty - U.S. Guide to the Expression of Uncertainty in Measurement
- ANSI C78.376-1996 AMERICAN NATIONAL STANDARD FOR ELECTRIC LAMPS- SPECIFICATIONS FOR THE CHROMATICITY OF FLUORESCENT LAMPS
- BS EN 2591-508:2023 Aerospace series. Elements of electrical and optical connection. Test methods Measurement of thickness of coating on contacts (British Standard)
- PD ISO/TS 4640:2023 Dentistry. Test methods for tensile bond strength to tooth structure (British Standard)
- ANSI Z83.19a-2010 American National Standard/CSA Standard for Gas-Fired High Intensity Infrared Heaters, same as CSA 2.35a
CU-NC, National standard
- INC 81-1985
- INC 78-1984
- NC 00-38-1987 National System for Standardizaron, Metrology and Quality Control. Standard Reference Samples. General Principies
- NC 00-37-1987 National System for Standardiza- tion, Metrology and Quality Control. Guide for the Elabora- tion of Precisión Measurement Standards
British Standards Institution (BSI), National standard
Association Francaise de Normalisation, National standard
- NF T46-028:1976 Vulcanized rubbers of low hardness (10 to 35 irhd). Determination of hardness.
- NF T46-029:1976 Vulcanized rubbers of high hardness (85 to 100 irhd). Determination of hardness.
- NF T30-120:1974 PAINTS. DETERMINATION OF FILM THICKNESS. SUMMARY OF FRENCH STANDARDS.
- NF T47-404-1:2008 Rubber-covered rollers - Determination of apparent hardness - Part 1 : IRHD method.
PL-PKN, National standard
- PN C99282-10-1993 Photography. Direct-exposing medical and dental radiographic film/process systems. Determination of ISO speed and ISO average gradient
International Organization for Standardization (ISO), National standard
- ISO 1818:1975 Vulcanized rubbers of low hardness (10 to 35 IRHD); Determination of hardness
- ISO 1400:1975 Vulcanized rubbers of high hardness (85 to 100 IRHD); Determination of hardness
- ISO 48:1979 Vulcanized rubbers; Determination of hardness (Hardness between 30 and 85 IRHD)
- ISO 48:1994 Rubber, vulcanized or thermoplastic - Determination of hardness (Hardness between 10 IRHD and 100 IRHD)
- ISO 48:2007 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
- ISO 48:1994/Amd 1:1999 Rubber, vulcanized or thermoplastic - Determination of hardness (Hardness between 10 IRHD and 100 IRHD); Amendment 1
- ISO/IEC Guide 21:1981/Add 1:1983 Indication of the degree of equivalence between national standards and international standards; addendum 1
- ISO 7267-1:2008 Rubber-covered rollers - Determination of apparent hardness - Part 1: IRHD method
- ISO 7267-1:1986 Rubber-covered rollers; Determination of apparent hardness; Part 1 : IRHD method
Danish Standards Foundation, National standard
- DS/ISO 1818:1979 Vulcanized rubber of low hardness (10 to 35 IRHD). Determination of hardness
- DS/ISO 1400:1979 Vulcanized rubbers of high hardness (85 to 100 IRHD). Determination of hardness
- DS/ISO 48:1989 Vulcanized rubbers. Determination of hardness (Hardness between 30 and 85 IRHD)
- DS/ISO 7267/1:1987 Rubber covered rollers. Determination of apparent hardness. Part 1: IRHD method
American Society for Testing and Materials (ASTM), National standard
- ASTM D1415-68 Standard Test Method for International Hardness Of Vulcanized Rubber
- ASTM E1926-08(2021) Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ES-AENOR, National standard
Acoustical Society of America (ASA), National standard
- ASA S3.2-2020 AMERICAN NATIONAL STANDARD Method for Measuring the Intelligibility of Speech over Communication Systems
- ASA S1.22-2021 AMERICAN NATIONAL STANDARD Scales and sizes for plotting frequency characteristics and polar diagrams (a nationally adopted international standard)
Professional Standard - Building Materials, National standard
ZA-SANS, National standard
- SANS 1931:2003 Particle board - Highly moisture-resistant exterior type
- SANS 10048:2003 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD)
Institute of Electrical and Electronics Engineers (IEEE), National standard
- IEEE Std C12.7-1993 American National Standard Requirements for Watthour Meter Sockets(ANSI/IEEE)
- IEEE/ASA C16.31-1959*58 IRE 23.S1 ASA American Standard Method of Measurement of Television Luminance Signal Levels
- IEEE/ANSI C63.15-2010 American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment
- IEEE/ANSI C63.15-2018 American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment
- ANSI C63.15-2017 American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment
- IEEE Std C63.15-2010 American National Standard
Recommended Practice for
the Immunity Measurement of
Electrical and Electronic Equipment
- ANSI PC63.15/D1.04, June 2017 Approved Draft American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment
- IEEE/ANSI C63.9-2008 American National Standard for RF Immunity of Audio Office Equipment to General Use Transmitting Devices with Transmitter Power Levels up to 8 Watts
European Committee for Standardization (CEN), National standard
- EN 3049:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD
German Institute for Standardization, National standard
- DIN EN 3049:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD; German version EN 3049:1998
- DIN EN 2428:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 50 IRHD; German version EN 2428:1995
- DIN EN 2261:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD; German version EN 2261:1995
- DIN EN 2259:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD; German version EN 2259:1995
- DIN EN 2260:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD; German version EN 2260:1995
- DIN ISO 48:2003 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:1994 + Amd. 1:1999)
- DIN EN 2432:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 90 IRHD; German version EN 2432:1995
- DIN EN 2430:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 70 IRHD; German version EN 2430:1995
- DIN EN 2431:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 80 IRHD; German version EN 2431:1995
- DIN EN 2429:1995 Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 60 IRHD; German version EN 2429:1995
- DIN EN 2262:1995 Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD; German version EN 2262:1995
Korean Agency for Technology and Standards (KATS), National standard
- KS M ISO 48:2008 Rubber, vulcanized or thermoplastic-Determination of hardness(hardness between 10 IRHD and 100 IRHD)
- KS A 0061-2015 Specification of colours according to the CIE 1931 standard colorimetric system and the CIE 1964 supplementary standard colorimetric system
- KS M ISO 7267-1:2010 Rubber-covered rollers－Determination of apparent hardness－Part 1：IRHD method
CZ-CSN, National standard
Jiangsu Provincial Standard of the People's Republic of China, National standard
- DB32/T 3495-2019 Specifications for setting speed limit signs on ordinary national and provincial highways
RO-ASRO, National standard
- STAS 5441/1-1974 VULCANIZED ELASTOMERES Determination of hardness expressed in International Rubber Hard Degree
National Health Commission of the People's Republic of China, National standard
- GB 5009.239-2016 Determination of food acidity in national food safety standards
- GB 5009.238-2016 Determination of Water Activity of Food in National Food Safety Standard
- GB 5009.225-2016 Determination of ethanol concentration in national food safety standard wine
- GB 5009.2-2016 Determination of Relative Density of Food in National Food Safety Standard
RU-GOST R, National standard
- GOST 8.062-1985 State system for ensuring the uniformity of measurements. State special standart and state verification schedule for measuring means of hardness on Brinell scales
- GOST 8.031-1982 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means of measuring neutron flux and its density
- GOST 8.205-1990 State system for ensuring the uniformity of measurements. State verification schedule for measurement means of chroma coordinates and chromaticity coordinates
IN-BIS, National standard
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., National standard
- IEEE C63.15-2017 American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment
- IEEE C63.15-2010 American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment
- IEEE PC63.15/D1.04-2017 American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment
- IEEE C63.9-2008 American National Standard for RF Immunity of Audio Office Equipment to General Use Transmitting Devices with Transmitter Power Levels up to 8 Watts
IT-UNI, National standard
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, National standard
- GB 5413.33-2010 National food safety standard Determination of specific gravity in raw milk
International Telecommunication Union (ITU), National standard
- ITU-R TF.685-1990 (WITHDRAWN) International Synchronization of UTC Time Scales - Section 7B - Specifications for the Standard-Frequency and Time-Signal Services