ZH
RU
ES

Composite material testing fatigue machine

Composite material testing fatigue machine, Total:258 items.

In the international standard classification, Composite material testing fatigue machine involves: Reinforced plastics, Testing of metals, Plastics, Rubber and plastics products, Ceramics, Mechanical testing, Waxes, bituminous materials and other petroleum products, Internal combustion engines, Medical equipment, Cellular materials, Powder metallurgy, Footwear, Products of non-ferrous metals, Bearings, Road engineering, Road vehicles in general, Construction materials, Semiconductor devices, Rubber, Electromechanical components for electronic and telecommunications equipment, Vibrations, shock and vibration measurements, Materials for aerospace construction, Thermodynamics and temperature measurements, Packaging machinery.

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Composite material testing fatigue machine

GB/T 35465.3-2017 Test method for fatigue properties of polymer matrix composite materials -Part 3: Tension-tension fatigue
GB/T 35465.1-2017 Test method for fatigue properties of polymer matrix composite materials—Part 1：General principle
GB/T 33812-2017 Metallic material—Fatigue testing—Strain-controlled thermomechanical fatigue testing method
GB/T 8243.15-2018 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 15: Vibration fatigue test for composite filter housings
GB/T 35465.2-2017 Test method for fatigue properties of polymer matrix composite materials -Part 2: Statistical analysis of linear or linearized stress-life(S-N) and strain-life(ε-N) fatigue data

国家市场监督管理总局、中国国家标准化管理委员会, Composite material testing fatigue machine

GB/T 35465.5-2020 Test method for fatigue properties of polymer matrix composite materials—Part 5: Flexural fatigue
GB/T 35465.4-2020 Test method for fatigue properties of polymer matrix composite materials—Part 4: Tension-compression fatigue and compression-compression fatigue
GB/T 35465.6-2020 Test method for fatigue properties of polymer matrix composite materials—Part 6:Fatige properties of adhesives in shear by tension
GB/T 41154-2021 Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-controlled thermo-mechanical fatigue testing method
GB/T 38250-2019 Metallic materials—Verification of the alignment of fatigue testing machines
GB/T 41155-2021 Sintered metal materials, excluding hardmetals—Fatigue test pieces

British Standards Institution (BSI), Composite material testing fatigue machine

BS ISO 23296:2022 Metallic materials. Fatigue testing. Force controlled thermo-mechanical fatigue testing method
21/30381303 DC BS ISO 23296. Metallic materials. Fatigue testing. Force controlled thermo-mechanical fatigue testing method
BS ISO 12111:2011 Metallic materials. Fatigue testing. Strain-controlled thermomechanical fatigue testing method
BS ISO 12108:2018 Tracked Changes. Metallic materials. Fatigue testing. Fatigue crack growth method
BS ISO 23788:2012 Metallic materials. Verification of the alignment of fatigue testing machines
BS ISO 12110-1:2013 Metallic materials. Fatigue testing. Variable amplitude fatigue testing. General principles, test method and reporting requirements
BS ISO 1143:2010 Metallic materials. Rotating bar bending fatigue testing
BS ISO 12110-2:2013 Metallic materials. Fatigue testing. Variable amplitude fatigue testing. Cycle counting and related data reduction methods
21/30404149 DC BS ISO 1352. Metallic materials. Torque-controlled fatigue testing
BS EN ISO 3385:1995 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding
BS EN ISO 3385:2014 Flexible cellular polymeric materials. Determination of fatigue by constant-load pounding
18/30366891 DC BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing
20/30404146 DC BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing
BS ISO 1352:2021 Tracked Changes. Metallic materials. Torque-controlled fatigue testing
BS ISO 3928:1999 Sintered metal materials, excluding hardmetals - Fatigue test pieces
BS ISO 1143:2021 Tracked Changes. Metallic materials. Rotating bar bending fatigue testing
20/30361190 DC BS ISO 22407. Metallic materials. Fatigue testing. Axial plane bending method
BS EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance
BS ISO 4965-1:2012 Metallic materials. Dynamic force calibration for uniaxial fatigue testing. Testing systems
17/30347641 DC BS ISO 12107. Metallic materials. Fatigue testing. Statistical planning and analysis of data
BS ISO 4548-15:2014 Methods of test for full-flow lubricating oil filters for internal combustion engines. Vibration fatigue test for composite filter housings
BS EN 62047-6:2010 Semiconductor devices - Micro-electromechanical devices - Axial fatigue testing methods of thin film materials
BS CWA 15261-1:2005 Measurement uncertainties in mechanical tests on metallic materials - The evaluation of uncertainties in low-cycle fatigue testing
BS ISO 17140:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of fatigue properties at constant amplitude
BS EN ISO 17140:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of fatigue properties at constant amplitude
BS ISO 7905-3:2019 Plain bearings. Bearing fatigue - Test on plain strips of a metallic multilayer bearing material
BS ISO 7905-4:2022 Plain bearings. Bearing fatigue - Tests on half-bearings of a metallic multilayer bearing material
BS ISO 4965-2:2012 Metallic materials. Dynamic force calibration for uniaxial fatigue testing. Dynamic calibration device (DCD) instrumentation
BS ISO 7905-2:2021 Plain bearings. Bearing fatigue - Test with a cylindrical specimen of a metallic bearing material
BS ISO 17142:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude
BS EN ISO 17142:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude
BS ISO 20819-2:2023 Plastics. Wood-plastic recycled composites (WPRC) - Test methods
BS EN 3873:2011 Aerospace series. Test methods for metallic materials. Determination of fatigue crack growth rates using corner-cracked (CC) test pieces
BS EN 3873:2010 Aerospace series. Test methods for metallic materials. Determination of fatigue crack growth rates using corner-cracked (CC) test pieces

RU-GOST R, Composite material testing fatigue machine

GOST R 56793-2015 Polymer composites. Method for determination of fatigue delamination of unidirectional reinforced composites
GOST R 57569-2017 Polymer composites. Test method for fatigue of samples with open hole
GOST R 57049-2016 Polymer composites. Test method for shear fatigue of sandwich core materials
GOST R 57143-2016 Polymer composites. Standard test method for tension-tension fatigue
GOST R 57711-2017 Ceramic composites. Determination of characteristics fatigue loading with constant amplitude at high temperature
GOST R 57731-2017 Reinforcing fillers. Method for determination of fatigue delamination of unidirectional reinforced composites
GOST R 57047-2016 Polymer composites. Method for determination of the characteristics of fatigue resistance of laminates
GOST 28841-1990 Mashines for fatigue testing of materials. General technical requirements
GOST 33845-2016 Polymer composites. Test method for fatigue properties under cyclic loading conditions
GOST R ISO 10768-2017 Footwear. Test method for the determination of the resistance of elastic materials for footwear to repeated extension. Fatigue resistance
GOST R 57926-2017 Ceramic composites. Test method for determination of axial tension-tension cyclic fatigue at constant amplitude and normal temperature
GOST R ISO 3385-1993 Flexible cellular polymeric materials. Determination of fatigue by constant-load pounding
GOST R ISO 7905-3-1999 Plain bearings. Bearing fatigue. Test on plain strips of a metallic multilayer bearing material
GOST 25.505-1985 Design, calculation and strength testing. Methods of mechanical testing of metals. Method of testing on the low cycle fatigue at heat mechanical loading
GOST R ISO 7905-2-1999 Plain bearings. Bearing fatigue. Test with a cylindrical specimen of a metallic bearing material
GOST R 57686-2017 Ceramic composites. Determination of misalignment of grips of a testing machine
PNST 135-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the fatigue strength under repeated bending
GOST R 57712-2017 Polymer composites. Test method for determination of specific heat
GOST 33377-2015 Polymer composites. Test method for filled-hole tension testing of specimens
GOST 33375-2015 Polymer composites. Test method for open-hole tension testing of specimens
GOST R 57867-2017 Polymer composites. Test methods for determination of pull-through resistance
GOST R 57754-2017 Polymer composites. Test method for determination of linear thermal expansion by thermomechanical analysis

SE-SIS, Composite material testing fatigue machine

MNC 330-1979 Metallic materials — Fatigue testing

American Society for Testing and Materials (ASTM), Composite material testing fatigue machine

ASTM D3479/D3479M-96 Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D3479/D3479M-19 Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D3479/D3479M-12 Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D3479/D3479M-19(2023) Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D3479/D3479M-96(2002)e1 Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D3479/D3479M-96(2007) Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D7615/D7615M-23 Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
ASTM D7615/D7615M-19 Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
ASTM D7615/D7615M-11(2018) Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
ASTM D6873/D6873M-23 Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
ASTM B593-96 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2003) Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2003)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2009)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-20 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-21 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B593-96(2014)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM D8237-21 Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device
ASTM D8237-18 Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures With the Four-Point Beam Fatigue Device
ASTM D6115-97(2011) Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D6115-97(2019) Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM E468-11 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
ASTM D4762-11a Standard Guide for Testing Polymer Matrix Composite Materials
ASTM D7745-11 Standard Practice for Testing Pultruded Composites

Professional Standard - Aviation, Composite material testing fatigue machine

HB 7624-1998 Bending fatigue test method for carbon fiber composite laminates
HB 5440-1989 Tensile-tensile fatigue test method for carbon fiber resin matrix composites
HB 5439-1989 Tension-compression and compression-compression fatigue test methods for carbon fiber resin composites
HB 5277-1984 Engine blade plane and material vibration fatigue test method

BELST, Composite material testing fatigue machine

STB 1758-2007 Tribo-fatigue. Method of combined tests of the toothed gearing materials to contact and bending fatigue

Military Standard of the People's Republic of China-General Armament Department, Composite material testing fatigue machine

GJB 2637-1996 Fatigue test method for carbon fiber resin matrix composite laminates
GJB 2637A-2019 Test method for fatigue performance of fiber reinforced resin matrix composite laminates

International Organization for Standardization (ISO), Composite material testing fatigue machine

ISO 23296:2022 Metallic materials – Fatigue testing – Force controlled thermo-mechanical fatigue testing method
ISO 12111:2011 Metallic materials - Fatigue testing - Strain-controlled thermomechanical fatigue testing method
ISO 23788:2012 Metallic materials - Verification of the alignment of fatigue testing machines
ISO 3928:1977 Sintered metal materials, excluding hardmetals; Fatigue test pieces
ISO/CD TR 15262 Mechanical tests on metallic materials — Uncertainty in low-cycle fatigue
ISO 3385:1982 Cellular polymeric flexible materials — Determination of fatigue by constant load pounding
ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance
ISO/TR 13086-4:2019 Gas cylinders — Guidance for design of composite cylinders — Part 4: Cyclic fatigue of fibres and liners
ISO 24999:2008 Flexible cellular polymeric materials - Determination of fatigue by a constant-strain procedure
ISO 3385:1989 Flexible cellular polymeric materials; determination of fatigue by constant-load pounding
ISO 3385:2014 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding
ISO 17140:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude
ISO 4548-15:2014 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 15: Vibration fatigue test for composite filter housings
ISO 4965-2:2012 Metallic materials - Dynamic force calibration for uniaxial fatigue testing - Part 2: Dynamic calibration device (DCD) instrumentation
ISO/CD 4548-15 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15: Vibration fatigue test for composite filter housings
ISO/DIS 4548-15:2023 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15: Vibration fatigue test for composite filter housings
ISO 17142:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude
ISO 7905-3:2019 Plain bearings — Bearing fatigue — Part 3: Test on plain strips of a metallic multilayer bearing material

GOSTR, Composite material testing fatigue machine

GOST R 57752-2017 Ceramic composites. Determination of characteristics fatigue loading with constant amplitude at normal temperature
GOST R 58992-2020 Materials for aviation gas turbine engines. Test methods for fatigue at elevated temperatures
GOST R 57859-2017 Polymer composites. Test method for determining resistance of synthetic polymeric materials to fungi

Indonesia Standards, Composite material testing fatigue machine

SNI 07-3384-1994 Presentation of constant amplitude fatigue test result for metallic materials

AENOR, Composite material testing fatigue machine

UNE 59622:2007 Footwear materials. Elastics. Determination of fatigue resistance to repeated stretching.
UNE 53170:2002 Cellular polymeric flexible materials. Determination of static fatigue at constant deformation.
UNE 53211:2002 Cellular polymeric flexible materials. Determination of static fatigue at constant force.
UNE-EN ISO 3928:2017 Sintered metal materials, excluding hardmetals - Fatigue test pieces (ISO 3928:2016)
UNE-EN ISO 10768:2011 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010)
UNE 59536:2014 Footwear. Test methods for soles. Compression fatigue resistance of cellular materials.
UNE-EN ISO 3385:2014 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding (ISO 3385:2014)

Association Francaise de Normalisation, Composite material testing fatigue machine

NF T51-120-4:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 4 : essai en flexion quatre points sur éprouvettes non encastrées.
NF T51-120-5:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 5 : essai en flexion à moment constant.
NF T51-120-1:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 1 : principes généraux.
NF T51-120-2:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - Partie 2 : essai en flexion sur éprouvettes encastrées.
NF EN ISO 10768:2010 Chaussures - Méthode d'essai pour la détermination de la résistance des élastiques de chaussures à des extensions répétées - Résistance à la fatigue
NF T51-120-6:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 6 : essai de flexion par flambement.
NF A95-327*NF EN ISO 3928:2017 Sintered metal materials, excluding hardmetals - Fatigue test pieces
NF A95-327:2006 Sintered metal materials, excluding hardmetals - Fatigue test pieces.
NF EN ISO 3928:2017 Matériaux métalliques frittés, à l'exclusion des métaux-durs - Éprouvettes pour essais de fatigue
NF P98-233-1:1994 Tests relating to pavements. Determination of fatigue resistance on material bound with hydraulic binders. Part 1 : flexural fatigue test with constant stress.
NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF G62-616*NF EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance.
NF T56-115*NF EN ISO 3385:2014 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding
NF T56-115:1995 Flexible cellular polymeric materials. Determination of fatigue by constant-load pounding.
NF A95-327:1986 Powder metallurgy. Sintered metal materials excluding hardmetals. Fatigue test pieces.
NF EN ISO 3385:2014 Matériaux polymères alvéolaires souples - Détermination de la fatigue par indentation à charge constante
NF EN ISO 17140:2016 Céramiques techniques - Propriétés mécaniques des céramiques composites à température ambiante - Détermination des propriétés de fatigue à amplitude constante
NF T46-021:1973 Rubber and similar elastomers. Dynamic fatigue test by repeated tensile stresses.
NF B43-355*NF EN ISO 17140:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude
NF P98-286:2006 Test relating to pavements - Waterproofing materials for engineering structures - Determination of the fatigue strength of a waterproofing surface course on sheet metal - Negative bending moment fatigue bench test method
NF EN 62047-6:2010 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 6 : méthodes d'essais de fatigue axiale des matériaux en couche mince
NF B43-357*NF EN 15158:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude.
NF C96-050-6*NF EN 62047-6:2010 Semiconductor devices - Micro-electromechanical devices - Part 6 : axial fatigue testing methods of thin film materials
CWA 15261-1:2005 Measurement uncertainties in mechanical tests on metallic materials - Part 1 : the evaluation of uncertainties in low-cycle fatigue testing
NF EN ISO 17142:2016 Céramiques techniques - Propriétés mécaniques des céramiques composites à haute température sous air à pression atmosphérique - Détermination des propriétés de fatigue à amplitude constante
NF B43-356*NF EN ISO 17142:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude
NF EN 15158:2006 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à haute température sous atmosphère inerte - Détermination des propriétés de fatigue à amplitude constante
NF L06-452*NF EN 3873:2012 Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces.
NF EN 3873:2012 Série aérospatiale - Méthodes d'essais applicables aux matériaux métalliques - Détermination de la vitesse de propagation de fissure en fatigue à l'aide d'éprouvettes avec fissure en coin
NF C96-050-12*NF EN 62047-12:2012 Semiconductor devices - Micro-electromechanical devices - Part 12 : bending fatigue testing method of thin film materials using resonant vibration of MEMS structures.
NF EN 15534-1/IN1:2018 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 1 : Méthodes d'essai pour la caractérisation des compositions et d...
NF EN 15534-1+A1:2018 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 1 : Méthodes d'essai pour la caractérisation des compositions et d...

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Composite material testing fatigue machine

GJB 6213-2008 Testing method for thermal-mechanical fatigue of metallic materials

Korean Agency for Technology and Standards (KATS), Composite material testing fatigue machine

KS B 5537-2002(2022) Material testing machine：Fatigue testing machine：Definitions, general requirements
KS B 5537-2002(2017) Material testing machine：Fatigue testing machine：Definitions, general requirements
KS F 2378-2013 Standard test method for flexural beam fatigue of asphalt mixtures
KS D ISO 3928:2004 Sintered metal materials, excluding hardmetals-Fatigue test pieces
KS M ISO 3385:2002 Flexible cellular polymeric materials－Determination of fatigue by constant-load pounding
KS M ISO 3385:2017 Flexible cellular polymeric materials－Determination of fatigue by constant-load pounding
KS D ISO 3928:2019 Sintered metal materials, excluding hardmetals —Fatigue test pieces
KS M ISO 24999-2010(2021) Flexible cellular polymeric materials－Determination of fatigue by a constant-strain procedure
KS M ISO 3385-2017(2022) Flexible cellular polymeric materials－Determination of fatigue by constant-load pounding
KS M ISO 24999:2010 Flexible cellular polymeric materials-Determination of fatigue by a constant-strain procedure
KS B ISO 7905-3:2007 Plain bearings－Bearing fatigue－Part 3：Test on plain strips of a metallic multilayer bearing material
KS F 2624-2006 Fatigue resistance test method of direct injecting materials for repairing on the concrete crack
KS B ISO 7905-4:2007 Plain bearings－Bearing fatigue－Part 4：Tests on half-bearings of a metallic multilayer bearing material

BE-NBN, Composite material testing fatigue machine

NBN T 46-004-1977 Flexible cellular matinals - Test for dynamic fatigue by constant load pormding
NBN T 46-004-1983 Cellular polymeric flexible materials - Determination of fatigue by constant load pounding

Japanese Industrial Standards Committee (JISC), Composite material testing fatigue machine

JIS T 0309:2009 Test method for fatigue properties of metallic biomaterials
JIS R 1722:2015 Testing method for fatigue behavior of continuous fiber-reinforced ceramic composites at room temperature under constant amplitude
JIS C 5630-6:2011 Semiconductor devices -- Micro-electromechanical devices -- Part 6: Axial fatigue testing methods of thin film materials
JIS K 6400-4:2004 Flexible cellular polymeric materials -- Determination of physical properties -- Part 4: Compression set and fatigue characteristics
JIS C 5630-12:2014 Semiconductor devices.Micro-electromechanical devices.Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures

National Aeronautics and Space Administration (NASA), Composite material testing fatigue machine

NASA NACA-TN-2324-1951 Fatigue strengths of aircraft materials axial load-fatigue tests on unnotched sheet specimens of 24S-T3 and 75S-T6 aluminum alloys and of SAE 4130 steel

API - American Petroleum Institute, Composite material testing fatigue machine

API CEAC-TR-96-0103-1996 LONG-TERM CYCLIC FATIGUE STRENGTH PREDICTION METHODOLOGY FOR FIBERCOMPOSITE LAMINATES UNDER MULTIAXIAL LOADING

工业和信息化部/国家能源局, Composite material testing fatigue machine

JB/T 13226-2017 In-situ fatigue mechanical properties testing system for solid materials

German Institute for Standardization, Composite material testing fatigue machine

DIN EN ISO 3385:2014-10 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding (ISO 3385:2014); German version EN ISO 3385:2014
DIN EN ISO 3928:2017-03 Sintered metal materials, excluding hardmetals - Fatigue test pieces (ISO 3928:2016); German version EN ISO 3928:2016
DIN ISO 7905-3:1998 Plain bearings - Bearing fatigue - Part 3: Tests on plain strips of a metallic multilayer bearing material (ISO 7905-3:1996)
DIN EN ISO 10768:2010-12 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010); German version EN ISO 10768:2010
DIN ISO 7905-4:1998 Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material (ISO 7905-4:1996)
DIN EN 15158:2006-10 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude; German version EN 15158:2006
DIN EN ISO 3385:2008 Flexible cellular polymeric materials - Determination of fatigue by constant load pounding (ISO 3385:1989); German version EN ISO 3385:1995
DIN EN ISO 17140:2016-10 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude (ISO 17140:2014); German version EN ISO 17140:2016
DIN EN 62047-6:2010-07 Semiconductor devices - Micro-electromechanical devices - Part 6: Axial fatigue testing methods of thin film materials (IEC 62047-6:2009); German version EN 62047-6:2010
DIN ISO 7905-4:1998-09 Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material (ISO 7905-4:1996)
DIN ISO 7905-3:1998-09 Plain bearings - Bearing fatigue - Part 3: Tests on plain strips of a metallic multilayer bearing material (ISO 7905-3:1996)
DIN 53533-1:1988 Testing of elastomeres; testing of heat generation and service life during the fatigue test (flexometer test); bases principles
DIN 53533-3:1988 Testing of elastomers; testing of heat generation and service life during the fatigue test (flexometer test); compression-flexometer
DIN 53533-2:1988 Testing of elastomers; testing of heat generation and service life during the fatigue test (flexometer test); rotary flexometer
DIN EN ISO 17142:2016-11 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude (ISO 17142:2014); German version...
DIN EN 62047-12:2012-06 Semiconductor devices - Micro-electromechanical devices - Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures (IEC 62047-12:2011); German version EN 62047-12:2011
DIN EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010); German version EN ISO 10768:2010
DIN EN 3873:2011-11 Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces; German and English version EN 3873:2010
DIN ISO 7905-2:1998-09 Plain bearings - Bearing fatigue - Part 2: Test with a cylindrical specimen of a metallic bearing material (ISO 7905-2:1996)
DIN EN ISO 17140:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude (ISO 17140:2014); German version EN ISO 17140:2016

Danish Standards Foundation, Composite material testing fatigue machine

DS/EN ISO 3928:2006 Sintered metal materials, excluding hardmetals – Fatigue test pieces
DS/EN 15156:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude
DS/EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance
DS/EN 15158:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude
DS/EN ISO 3385:1995 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding
DS/EN 15157:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude
DS/EN 62047-6:2010 Semiconductor devices - Micro-electromechanical devices - Part 6: Axial fatigue testing methods of thin film materials
DS/EN 3873:2010 Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces

KR-KS, Composite material testing fatigue machine

KS D ISO 3928-2019 Sintered metal materials, excluding hardmetals —Fatigue test pieces

Lithuanian Standards Office , Composite material testing fatigue machine

LST EN 15156-2006 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude
LST EN 15158-2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude
LST EN ISO 3928:2006 Sintered metal materials, excluding hardmetals - Fatigue test pieces (ISO 3928:1999)
LST EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010)
LST EN 15157-2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude
LST EN ISO 3385:2001 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding (ISO 3385:1989)
LST EN 3873-2011 Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces
LST EN 62047-6-2010 Semiconductor devices - Micro-electromechanical devices - Part 6: Axial fatigue testing methods of thin film materials (IEC 62047-6:2009)

TR-TSE, Composite material testing fatigue machine

TS 3466-1980 FLEXIBLE CELLULAR MATERIALS - TEST FOR DYNAMIC FATIGUE BY CONSTANT LOAD POUNDING

Group Standards of the People's Republic of China, Composite material testing fatigue machine

T/SXMES 14-2022 Evaluation method of surface temperature for metal material fatigue limit test
T/CSAE 170-2020 Test methods for mechanical properties of adhesively bonded joints for automotive polymer matrix composites—Composite/composite
T/CSAE 171-2020 Test methodsfor mechanical properties of adhesively bonded joints for automotive polymer matrix composites—Composite/metal

European Committee for Standardization (CEN), Composite material testing fatigue machine

EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010)
EN ISO 3385:2014 Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding
EN ISO 3385:1995 Flexible Cellular Polymeric Materials - Determination of Fatigue by Constant-Load Pounding (ISO 3385 : 1989)
EN ISO 17140:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude (ISO 17140:2014)
EN 15156:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude
EN 3873:2010 Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces

IT-UNI, Composite material testing fatigue machine

UNI 3964-1973

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Composite material testing fatigue machine

GB/T 42258-2022 Flexible cellular polymeric materials—Determination of fatigue by a constant-strain procedure

BR-ABNT, Composite material testing fatigue machine

ABNT MB-458-1978

The American Road & Transportation Builders Association, Composite material testing fatigue machine

AASHTO T 321-2007 Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (HMA) Subjected to Repeated Flexural Bending
AASHTO T 321-2014 Standard Method of Test for Determining the Fatigue Life of Compacted Asphalt Mixtures Subjected to Repeated Flexural Bending

ES-UNE, Composite material testing fatigue machine

UNE-EN 15158:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude (Endorsed by AENOR in January of 2007.)
UNE-EN 62047-6:2010 Semiconductor devices - Micro-electromechanical devices -- Part 6: Axial fatigue testing methods of thin film materials (Endorsed by AENOR in June of 2010.)
UNE-EN ISO 17140:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude (ISO 17140:2014) (Endorsed by AENOR in June of 2016.)
UNE-EN 62047-12:2011 Semiconductor devices - Micro-electromechanical devices - Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures (Endorsed by AENOR in February of 2012.)
UNE-EN 3873:2010 Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces (Endorsed by AENOR in February of 2011.)

American Gear Manufacturers Association, Composite material testing fatigue machine

AGMA 08FTM11-2008 Bending Fatigue Tests of Helicopter Case Carburized Gears: Influence of Material, Design and Manufacturing Parameters

European Association of Aerospace Industries, Composite material testing fatigue machine

AECMA PREN 3874-1995 Aerospace Series Test Methods for Metallic Materials Constant Amplitude Force-Controlled Low Cycle Fatigue Testing
AECMA PREN 3874-1998 Aerospace Series Test Methods for Metallic Materials Constant Amplitude Force-Controlled Low Cycle Fatigue Testing Edition P 1
AECMA PREN 3873-2010 Aerospace series Test methods for metallic materials Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces Edition P 1

AASHTO - American Association of State Highway and Transportation Officials, Composite material testing fatigue machine

T 321-2014 Standard Method of Test for Determining the Fatigue Life of Compacted Asphalt Mixtures Subjected to Repeated Flexural Bending

AGMA - American Gear Manufacturers Association, Composite material testing fatigue machine

08FTM11-2008 Bending Fatigue Tests of Helicopter Case Carburized Gears: Influence of Material@ Design and Manufacturing Parameters

European Committee for Electrotechnical Standardization（CENELEC）, Composite material testing fatigue machine

EN 62047-6:2010 Semiconductor devices - Micro-electromechanical devices - Part 6: Axial fatigue testing methods of thin film materials

International Electrotechnical Commission (IEC), Composite material testing fatigue machine

IEC 62047-6:2009 Semiconductor devices - Micro-electromechanical devices - Part 6: Axial fatigue testing methods of thin film materials
IEC 62047-12:2011 Semiconductor devices - Microelectromechanical devices - Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Composite material testing fatigue machine

PREN 4524-1998 Aerospace Series Metallic Materials Test Methods Measurement of Fatigue Crack Growth Rates (Edition P1)
PREN 3873-2010 Aerospace series Test methods for metallic materials Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces (Edition P 1)

YU-JUS, Composite material testing fatigue machine

JUS M.C3.326-1988 Plain bearings. Hardness testlng of bearlng materials. Compound materials

Underwriters Laboratories (UL), Composite material testing fatigue machine

UL 1694-1997 Tests for flammability of small polymeric component materials

Aerospace, Security and Defence Industries Association of Europe (ASD), Composite material testing fatigue machine

ASD-STAN PREN 4524-1998 Aerospace Series Metallic Materials Test Methods Measurement of Fatigue Crack Growth Rates (Edition P1)

Professional Standard - Machinery, Composite material testing fatigue machine

JB/T 12748-2015 Methods of test for the performance of wood alternative composite material for delivery drums for wires and cables

Professional Standard - Aerospace, Composite material testing fatigue machine

QJ 2509-1993 Test method for ash content of carbon/carbon composite materials

American Welding Society (AWS), Composite material testing fatigue machine

WRC 445:1999 Plastic Pipe: Burst And Fatigue Testing Of PVC And HDPE Pipe: Part 1, Part 2, & Part 3