ZH
RU
ES

Test center area

Test center area, Total:499 items.

In the international standard classification, Test center area involves: Buildings, Crude petroleum, Fuels, Products of the chemical industry, Rubber, Road engineering, Edible oils and fats. Oilseeds, Leather technology, Railway engineering in general, Lubricants, industrial oils and related products, Testing of metals, Non-destructive testing, Inorganic chemicals, Road vehicle systems, Diagnostic, maintenance and test equipment, Measurement of fluid flow, Gas and steam turbines. Steam engines, Surface treatment and coating, Optical equipment, Products of the textile industry, Home textiles. Linen, Analytical chemistry, Glass, Industrial automation systems, Protection against fire, Continuous handling equipment, Machine tool systems, Power transmission and distribution networks, Agricultural machines, implements and equipment, Fibre optic communications, Paper and board, Telecommunication systems, Services, Construction industry, Installations in buildings, Mining and quarrying, Construction materials, Rubber and plastics products, Elements of buildings, Telecommunications in general, Water quality, Laboratory medicine, Metalliferous minerals, Space systems and operations, Information technology (IT) in general, Soil quality. Pedology, Particle size analysis. Sieving, Farming and forestry, Geology. Meteorology. Hydrology, Sports equipment and facilities, Postal services, Non-ferrous metals, Packaging and distribution of goods in general, Character sets and information coding, Materials for the reinforcement of composites, Physics. Chemistry, Materials for aerospace construction, Iron and steel products, Road vehicles in general, Insulation, Flexible drives and transmissions, Welding, brazing and soldering, Reinforced plastics, Metrology and measurement in general, Powder metallurgy, Corrosion of metals, Measurement of volume, mass, density, viscosity, Ceramics, Insulating materials, Paints and varnishes, Protection of and in buildings, Linear and angular measurements, Construction of airports, Medical equipment, Production of metals, Insulating fluids, Earthworks. Excavations. Foundation construction. Underground works, Radiation measurements, Nuclear energy engineering, Microbiology, Interface and interconnection equipment, Wastes, Tyres, Raw materials for rubber and plastics, Wood-based panels.

Indonesia Standards, Test center area

SNI 03-7012-2004 Smoke management systems in malls, atria and large areas
SNI 13-6977-2003 Mineral grain - Determination of specific surface area using test methods of Lea and Nurse permeabilities

American Society for Testing and Materials (ASTM), Test center area

ASTM D4007-11 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-11e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D2709-22 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D2709-96(2001)e1 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D2709-88 Standard Test Method for Water and Sediment in Distillate Fuels by Centrifuge
ASTM D2709-96e2 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D270-65(1980) Standard test method for water and sediment in distillate fuels from centrifuges
ASTM D1290-95 Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
ASTM D1290-95(2002) Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
ASTM D1290-95(2008) Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
ASTM D2709-16 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D4620-02(2007) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM D2347-00(2021) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D2347-00(2010) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D2347-00(2015) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D2709-96(2011)e1 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D4007-81(1995)e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-02 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-02(2006) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-08 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-22 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D4007-11(2016)e1 Standard test method for determination of water and sediment in crude oil by centrifugation (laboratory method)
ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM E2971-16(2020) Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
ASTM D4620-02(2017) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D2347-00 Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D2347-00(2005) Standard Test Method for Measuring Area of Leather Test Specimens
ASTM D6556-03 Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D3483-14 Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
ASTM E2109-01(2021) Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
ASTM E210-63(2016) Standard Specification for Microscope Objective Thread
ASTM D6556-02 Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-02a Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-09 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-21 Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-14 Standard Test Method for Carbon Blackmdash;Total and External Surface Area by Nitrogen Adsorption
ASTM D4365-95(2008) Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D4365-13 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D4365-19 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM D1993-03(2008) Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D1993-03 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM D4620-98 Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM D4620-02(2021) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM D4620-02 Standard Test Method for Evaluating the Effective Surface Area of Zinc-Oxide in Rubber
ASTM D4620-02(2012) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
ASTM B263-99 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM B263/B263M-04(2010)e1 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM D6556-17 Standard Test Method for Carbon Black&x2014;Total and External Surface Area by Nitrogen Adsorption
ASTM B263-04 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM B263-04(2010) Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM E965-15(2019) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM D3977-97(2013)e1 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D5261-10 Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM B263/B263M-14(2020) Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM D5261-10(2018) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM B263/B263M-14 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM D5130-95(2003) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D4780-95(2007) Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption
ASTM D4780-95 Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption
ASTM E1197-87(1998) Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test
ASTM E1197-12(2021) Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test
ASTM D4870-22 Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM D6566-00(2006) Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D5261-92(1996) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D3858-95(2003) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3776-96(2002) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D3776-96 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM D6566-00 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D3858-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D8122-21 Standard Test Method for Determining Mass per Unit Area of Geohazard Nettings
ASTM D6566-18(2023) Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
ASTM D5626-94(2001) Standard Test Methods for U.S. Postal Service Optical Measurements for Small Areas
ASTM D3858-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D6566-14 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D1993-03(2013)e1 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
ASTM E2864-18 Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM D4870-07a Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM D4870-07 Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM D4807-88(1999) Standard Test Method for Sediment in Crude Oil by Membrane Filtration
ASTM D4870-99 Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM D4870-04 Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM D5015-02(2008) Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D4807-05(2010) Standard Test Method for Sediment in Crude Oil by Membrane Filtration
ASTM D4870-09(2014) Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM D6566-12 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D6566-17 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D6566-18 Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
ASTM E2864-13 Standard Test Method for Measurement of Airborne Metal and Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM A939-96 Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
ASTM A939-96(2001) Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
ASTM D6556-16 Standard Test Method for Carbon Black&x2014;Total and External Surface Area by Nitrogen Adsorption
ASTM D4780-95(2001) Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption
ASTM D6475-00 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
ASTM B922-10 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM D6556-10 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-04 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM E2109-01(2014) Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
ASTM B922-20 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM E965-96(2001) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM E965-96 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM E965-96(2006) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM B873-12 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B???212, B???329, and B???417
ASTM C1274-00(2006) Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM B922-02 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM D6556-00a Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-01a Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM D6556-01 Standard Test Method for Carbon Black8212;Total and External Surface Area by Nitrogen Adsorption
ASTM B922-02(2008) Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM C1274-00 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1274-95 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1274-10 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1274-12 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM D5993-18(2022) Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners
ASTM D5993-18 Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners
ASTM B922-22 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM C1274-12(2020) Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM B922-17 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM F1738-96(1999) Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants
ASTM F1738-96(2007) Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants
ASTM D2697-03 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM F1738-15 Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants
ASTM F1738-23 Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants
ASTM D4803-18 Standard Test Method for Predicting Heat Buildup in PVC Building Products
ASTM D4803-10(2018)e1 Standard Test Method for Predicting Heat Buildup in PVC Building Products
ASTM B873-23 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM B873-17 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM D2709-96(2006) Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM B873-96 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM B873-01 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM B873-01(2007) Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM D5061-92(1997) Standard Test Method for Microscopical Determination of Volume Percent of Textural Components in Metallurgical Coke
ASTM D6556-07 Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
ASTM D5130-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D5130-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM C1069-09(2022) Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM D5130-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D473-02 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
ASTM D4381-84(1993)e1 Standard Test Method for Sand Content by Volume of Bentonitic Slurries
ASTM D4381-84(2001) Standard Test Method for Sand Content by Volume of Bentonitic Slurries
ASTM E481-97 Standard Test Method for Measuring Neutron Fluence Rate by Radioactivation of Cobalt and Silver
ASTM F1738-10 Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants
ASTM E481-16 Standard Test Method for Measuring Neutron Fluence Rates by Radioactivation of Cobalt and Silver
ASTM D4412-19 Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
ASTM D4412-84(1997) Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
ASTM D4780-12 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM D5625-97(2002) Standard Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
ASTM C715-90(2000) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
ASTM D5625-97 Standard Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
ASTM C715-90(2016) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
ASTM D1428-82e1 Methods of Test for Sodium and Potassium in Water and Water-Formed Deposits by Flame Photometry
ASTM D2697-03(2021) Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM C173/C173M-01e1 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C173/C173M-10 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM D7249/D7249M-16e1 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
ASTM B873-21 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417

Korean Agency for Technology and Standards (KATS), Test center area

KS M 2115-2017(2022) Testing method for water and sediment in distillate fuel by centrifuge
KS M ISO 3734-2011(2016) Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method
KS M ISO 3734:2011 Petroleum products－Determination of water and sediment in residual fuel oils－Centrifuge method
KS B 4404-2003 TEST CODE FOR PERFORMANCE AND ACCURACY OF MACHINING CENTERS
KS B 7853-2013 Testing method for turning area and turning circle of agricultural tractors
KS B 4404-2008 TEST CODE FOR PERFORMANCE AND ACCURACY OF MACHINING CENTERS
KS B ISO 13041-7:2018 Test conditions for numerically controlled turning machines and turning centres — Part 7: Evaluation of contouring performance in the coordinate planes
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS G ISO 8364-2014(2019) Alpine skis and bindings — Binding mounting area — Requirements and test methods
KS T 1333-2012 Packaging－Complete, filled transport packages－Test methods for the determination of the center of gravity of a package
KS K ISO 9073-1:2018 Textiles — Test methods for nonwovens — Part 1: Determination of mass per unit area
KS B 4408-2012 test code for performance and accuracy of machining centers (vertical type)
KS D 0296-2009 Standard practice for determining area specific resistance of oxide scale formed on stainless steel plates
KS C IEC 60093:2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS B ISO 10791-8-2016(2021) Test conditions for machining centres — Part 8: Evaluation of contouring performance in the three coordinate planes
KS B ISO 10791-8:2021 Test conditions for machining centres — Part 8: Evaluation of contouring performance in the three coordinate planes
KS B ISO 10791-8:2016 Test conditions for machining centres — Part 8: Evaluation of contouring performance in the three coordinate planes
KS T 1333-2020 Packaging — Complete, filled transport packages — Test methods for the determination of the center of gravity of a package
KS K ISO 9073-1:2010 Textiles－Test methods for nonwovens－Part 1：Determination of mass per unit area
KS B ISO 13041-6:2018 Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece
KS B 4421-2002 Test code for performance and accuracy of machining centersX axis column traveling type
KS B ISO 10791-8:2010 Test conditions for machining centres-Part 8:Evaluation of contouring performance in the three coordinate planes

SE-SIS, Test center area

SIS SS 81 73 21-1979 Doorsets — Testing — Dimensions and squarness
SIS SS IEC 93:1983 Methods of test for volume résistivity and surface resistivityof solid electrical insulating materials
SIS SS-ISO 5748:1991 Pliers and nippers — End cutting nippers — Dimensions and test values
SIS SS-EN 29 073-1-1992 Textiles — Test methods for nonwovens — Part 1: Determination of m?ss per unit area

Professional Standard - Petrochemical Industry, Test center area

SH/T 0571-1993 Zeolite Surface Area Determination Method in Catalyst

Professional Standard - Energy, Test center area

NB/SH/T 0571-2021 Determination of Specific Surface Area and Micropore Volume of Zeolite in Catalyst

VE-FONDONORMA, Test center area

British Standards Institution (BSI), Test center area

BS EN 13863-3:2005 Concrete pavements - Test methods for the determination of the thickness of a concrete pavement from cores
BS EN 13863-3:2004 Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores
ISO 9073-1:2023 Nowovens. Test methods - Determination of mass per unit area
BS EN 12881-2:2005+A1:2008 Conveyor belts - Fire simulation flammability testing - Large scale fire test
BS EN 12881-2:2005+A1:2008(2009) Conveyor belts - Fire simulation flammability testing - Large scale fire test
BS EN ISO 25178-73:2019 Geometrical product specifications (GPS). Surface texture: Areal - Terms and definitions for surface defects on material measures
BS EN ISO 15301:2001 Animal and vegetable fats and oils. Determination of sediment in crude fats and oils. Centrifuge method
BS ISO 105-X16:2001 Textiles. Tests for colour fastness - Colour fastness to rubbing. Small areas
14/30288708 DC BS EN ISO 1288-2. Glass in building. Determination of the bending strength of glass. Part 2. Coaxial double-ring test on flat specimens with large test surface areas
BS EN 17125:2018 Domestic spas/whirlpool spas/hot tubs. Safety requirements and test methods
BS EN 29073-1:1990 Methods of test for nonwovens - Methods of test for nonwovens - Determination of mass per unit area
BS ISO 21283:2018 Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
BS 1042-2.2:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of velocity at one point of a conduit of circular cross section
BS ISO 3966:2008 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes
BS EN ISO 105-X16:2016 Tracked Changes. Textiles. Tests for colour fastness. Colour fastness to rubbing. Small areas
BS ISO 10791-8:2001 Test conditions for machining centres - Evaluation of contouring performance in the three coordinate planes
18/30381028 DC BS EN 15221-6. Facility Management - Part 6. Area and Space Measurement in Facility Management
BS ISO 3966:2020 Measurement of fluid flow in closed conduits. Velocity area method using Pitot static tubes
BS ISO 13674-2:2016 Tracked Changes. Road vehicles. Test method for the quantification of on-centre handling. Transition test
BS ISO 18322:2017 Space systems. General management requirements for space test centres
BS EN 2329:1993 Textile glass fibre preimpregnates - Test method for the determination of mass per unit area
22/30442768 DC BS EN ISO 9073-1. Nonwovens. Test methods. Part 1. Determination of mass per unit area
BS EN ISO 2420:2017 Leather. Physical and mechanical tests. Determination of apparent density and mass per unit area
20/30358619 DC BS EN ISO 748. Hydrometry. Measurement of liquid flow in open channels. Velocity area methods using point velocity measurements
BS ISO 10791-10:2022 Tracked Changes. Test conditions for machining centres. Evaluation of thermal distortions
BS ISO 13674-1:2010 Road vehicles - Test method for the quantification of on-centre handling - Weave test
BS EN ISO 4528:2000 Vitreous and porcelain enamel finishes. Selection of test methods for vitreous and porcelain enamelled areas of articles
BS EN ISO 4528:2009 Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles
BS ISO 24253-1:2015 Crop protection equipment. Spray deposition test for field crop. Measurement in a horizontal plane
PD CEN/TS 17510:2020 Materials obtained from end-of-life tyres. Determination of the specific surface area of powders. Method based on krypton adsorption
BS 5293-12:1996 Sampling and testing carbon black for use in the rubber industry - Methods for determination of surface area by surfactant adsorption
18/30361451 DC BS ISO 10791-7. Test conditions for machining centres. Part 7. Accuracy of finished test piece
BS 1042 Sec.2.2:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of velocity at one point of a conduit of circular cross section
BS 4140-23:1987 Methods of test for aluminium oxide - Determination of specific surface area by nitrogen adsorption (single-point method)
BS ISO 4652:2012 Rubber compounding ingredients. Carbon black. Determination of specific surface area by nitrogen adsorption methods. Single-point procedures
23/30440153 DC BS ISO 13674-1. Road vehicles. Test method for the quantification of on- centre handling - Part 1. Weave test

PT-IPQ, Test center area

NP 2332-1988 Methods of testing doors Measurement of dimensions and of defects of squareness of door leaves
NP EN 772-2-2001 Methods of test for masonry units Part 2:Determination of percentage area of voids in aggregate concrete masonry units(by paper indentation)

PL-PKN, Test center area

PN M53421-1961 Measuring Instruments Bench Testing Centres
PN C04087-1989 Crude petroleum and petroleum products Determination contens of water and sediment by the centrifuge method
PN C04404-11-1988 Pigments for paints General methods of test Determination of the specific surface area and texture
PN M55551-15-1987 Metal cutting machin? tools ethods of measurement the arallelism of an ax*s to a piane

International Organization for Standardization (ISO), Test center area

ISO 15301:2001 Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method
ISO 1070:2018 Hydrometry — Slope-area method
ISO 3354:1975 Measurement of clean water flow in closed conduits — Velocity-area method using current-meters
ISO 15301:2001/cor 1:2007 Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method; Technical Corrigendum 1
ISO 3966:2008 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes
ISO 3966:1977 Measurement of fluid flow in closed conduits; Velocity area method using Pitot static tubes
ISO/FDIS 9073-1 Nonwovens — Test methods — Part 1: Determination of mass per unit area
ISO 3966:2020 Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
ISO 9608:1994 V-belts - Uniformity of belts - Test method for determination of centre distance variation
ISO 2420:2017 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area
ISO 2420:2017 | IULTCS/IUP 5 Leather — Physical and mechanical tests — Determination of apparent density and mass per unit area
ISO 9073-1:1989 Textiles; test methods for nonwovens; part 1: determination of mass per unit area
ISO 10791-8:2001 Test conditions for machining centres - Part 8: Evaluation of the contouring performance in the three coordinate planes
ISO 21283:2018 Iron ores - Determination of specific surface area - Test method using air-permeability apparatus (Blaine)
ISO 3354:2008 Measurement of clean water flow in closed conduits - Velocity-area method using current-meters in full conduits and under regular flow conditions

ES-UNE, Test center area

UNE-EN ISO 15301:2002/AC:2007 Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method (ISO 15301:2001/Cor 1:2007)
UNE-EN 17125:2021 Domestic spas/whirlpool spas/hot tubs - Safety requirements and test methods
UNE-EN 772-2:1999/A1:2005 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
UNE-EN ISO 748:2023 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021)
UNE-EN ISO 2420:2018 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017)
UNE-EN ISO 105-X16:2016 Textiles - Tests for colour fastness - Part X16: Colour fastness to rubbing - Small areas (ISO 105-X16:2016)
UNE 15450-8:2003 ERRATUM Machine-tools. Test conditions for machining centres. Part 8: Evaluation of the contouring performance in the three coordinate planes.
UNE-EN 772-2:1999 METHODS OF TEST FOR MASONRY UNITS - PART 2: DETERMINATION OF PERCENTAGE AREA OF VOIDS IN AGGREGATE CONCRETE MASONRY UNITS (BY PAPER INDENTATION).
UNE-CEN/TS 17510:2020 Materials obtained from End-of-Life Tyres - Determination of the specific surface area of powders - Method based on krypton adsorption (Endorsed by Asociación Española de Normalización in December of 2020.)
UNE-EN ISO 11665-7:2016 Measurement of radioactivity in the environment - Air: radon-222 - Part 7: Accumulation method for estimating surface exhalation rate (ISO 11665-7:2012)
UNE-EN 16602-20-07:2016 Space product assurance - Quality and safety assurance for space test centres (Endorsed by AENOR in October of 2016.)

German Institute for Standardization, Test center area

DIN EN ISO 15301 Berichtigung 1:2007-09 Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method (ISO 15301:2001); German version EN ISO 15301:2001, Corrigenda to DIN EN ISO 15301:2002-01; German version EN ISO 15301:2001/AC:2007
DIN EN ISO 15301:2002-01 Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method (ISO 15301:2001); German version EN ISO 15301:2001
DIN EN ISO 15301 Berichtigung 1:2007 Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method (ISO 15301:2001); German version EN ISO 15301:2001, Corrigenda to DIN EN ISO 15301:2002-01; German version EN ISO 15301:2001/AC:2007
DIN EN 15221-6:2011-12 Facility Management - Part 6: Area and Space Measurement in Facility Management; German version EN 15221-6:2011 / Note: To be replaced by DIN EN 15221-6 (2018-12).
DIN 58933-1:1995-01 Haematology - Procedure for determining the volume fraction of erythrocytes (packed cell volume) in blood - Part 1: Reference method based on centrifugation
DIN EN 17125:2019 Domestic spas/whirlpool spas/hot tubs - Safety requirements and test methods
DIN EN 17125:2019-06 Domestic spas/whirlpool spas/hot tubs - Safety requirements and test methods; German version EN 17125:2018
DIN EN ISO 9073-1:2022-06 Nonwovens - Test methods - Part 1: Determination of mass per unit area (ISO/DIS 9073-1:2022); German and English version prEN ISO 9073-1:2022 / Note: Date of issue 2022-05-20*Intended as replacement for DIN EN 29073-1 (1992-08).
DIN EN 772-2:2005-05 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation); German version EN 772-2:1998 + A1:2005
DIN EN 1288-2:2000-09 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas; German version EN 1288-2:2000 / Note: To be replaced by DIN EN ISO 1288-2 (2007-10).
DIN EN 1288-5:2000-09 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas; German version EN 1288-5:2000 / Note: To be replaced by DIN EN ISO 1288-5 (2007-10).
DIN 58933-1:1995 Haematology - Procedure for determining the volume fraction of erythrocytes (packed cell volume) in blood - Part 1: Reference method based on centrifugation
DIN EN ISO 748:2022-12 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021); German version EN ISO 748:2021
DIN EN ISO 2420:2017-05 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017); German version EN ISO 2420:2017
DIN EN ISO 6272-2:2011-11 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011); German version EN ISO 6272-2:2011
DIN EN ISO 6272-1:2011-11 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011); German version EN ISO 6272-1:2011
DIN EN ISO 748:2022 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021)
DIN EN ISO 748:2020 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO/DIS 748:2020); German and English version prEN ISO 748:2020
DIN EN 1288-2:2000 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas; German version EN 1288-2:2000
DIN EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas; German version EN 1288-5:2000
DIN 66134:1998 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)
DIN EN 13863-3:2005 Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores; German version EN 13863-3:2004
DIN CEN/TS 17510:2020-12 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption; German version CEN/TS 17510:2020
DIN EN 13036-1:2010-10 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique; German version EN 13036-1:2010
DIN EN ISO 105-X16:2016-11 Textiles - Tests for colour fastness - Part X16: Colour fastness to rubbing - Small areas (ISO 105-X16:2016); German version EN ISO 105-X16:2016
DIN EN 2329:1993-04 Aerospace series; textile glass fibre preimpregnates; test method for the determination of mass per unit area; german version EN 2329:1993
DIN EN 17125:2017 Domestic spas and hot tubs - Safety requirements and test methods; German and English version prEN 17125:2017
DIN EN 16602-20-07:2016-12 Space produce assurance - Quality and safety assurance for space test centres; English version EN 16602-20-07:2016

国家铁路局, Test center area

TB/T 3536-2018 Train control center test specifications
TB/T 3535-2018 Radio Block Center Test Specification

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test center area

GB/T 13305-2008 Micrographic method for method determining area content of the α-phases in stainless steels
GB/T 8074-2008(英文版) Testing method for specific surface of cement—Blaine method
GB/T 7702.20-2008 Test method for granular activated carbon from coal.Determination of pore volume and specific surface area
GB/T 13305-1991 Austenitic stainless steels.Determination of area content of the alpha-phase.Micrographic method using standard diagrams
GB/T 2922-1982 Chemical reagents--Determination of specific surface area of solid supports used in chromatography
GB/T 7702.21-1997 Standard test method for granular activated carbon from coal--Determination of specific surface area
GB 50579-2010 Code of design for physical and chemical testing center of aviation industry
GB/T 14634.6-2002 Test methods of rare earth three-band phosphors for fluorescent lamps-Determination of specific surface area
GB/T 6401-1986 Micrographic method for determining area fraction of the alpha-phases using charts in ferritic-austenitic stainless steels
GB/T 9914.3-2001 Test method for reinforcement products Part 3: Determination of mass per unit area
GB/T 9914.3-2013 The method for reinforcement products.Part 3:Determination of mass per unit area
GB/T 32788.6-2016 Test method for properties of prepreg.Part 6:Determination of mass per unit area
GB/T 24218.1-2009 Textiles.Test methods for nonwovens.Part 1:Determination of mass per unit area
GB/T 14634.6-2010 Test methods of rare earth three-band phosphors for fluorescent lamps.Part 6:Determination of specific surface area
GB/T 13490-2006 V-belts. Uniformity of belts. Test method for determination of centre distance variation

GM Daewoo, Test center area

GMKOREA EDS-T-7611-2011

European Committee for Standardization (CEN), Test center area

prEN 772-2-1992 Methods of test for masonry units; part 2: determination of percentage area of voids in perforated and hollow masonry units (by paper indentation)
EN 13863-3:2004 Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores
EN ISO 15301:2001/AC:2007 Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method (ISO 15301:2001/Cor 1:2007)
FprEN ISO 9073-1 Nowovens - Test methods - Part 1: Determination of mass per unit area (ISO/FDIS 9073-1:2023)
EN ISO 9073-1:2023 Nonwovens - Test methods - Part 1: Determination of mass per unit area (ISO 9073-1:2023)
FprEN ISO 748:2021 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO/FDIS 748:2021)
EN ISO 15301:2001 Animal and Vegetable Fats and Oils - Determination of Sediment in Crude Fats and Oils - Centrifuge Method Incorporating corrigendum June 2007
prEN 725-6-1992 Advanced technical ceramics; methods of test for ceramic powders; part 6: determination of the specific surface area
EN 29073-1:1992 Textiles - Test Methods for Nonwoven - Part 1: Determination of Mass Per Unit Area

ZA-SANS, Test center area

ARP 065-2007 Test and fitment centres for airbags

Association of German Mechanical Engineers, Test center area

VDI/VDE 2640 Blatt 2-1981 Measurement of water flow in closed conduits; velocity-area method
DVS 1191-1989
DVS 1191-1988
DVS 1191-1987
DVS 1191-1986
DVS 1191-1992
DVS 1191-1991
DVS 1191-1990
DVS 1191-1994

CZ-CSN, Test center area

CSN 20 0300 Cast.24-1986 Measurements of geometrical accuracy of machine tools. Measuring methods for axial run-out of test part surfaces
CSN 66 8102 Cast.26-1997
CSN 49 0162-1975 Testing of physical and mechanical pro- perties of chipboards. Volume weight and square weight
CSN 50 0311-1983 Paper testing. Determination of thiokness, pparent density and speciíic volume
CSN 72 5042-1973 Testing of fired ceranyc materials. Definition of the specific surface and volume resistivities
CSN 20 0300 Cast.4-1984 Measurements of geometrical accuracy of machine tools Methods for parallelity measurement of two plane surfaces on test workpiece
CSN IEC 93:1993 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials

Standard Association of Australia （SAA）, Test center area

AS 4878.3:2001 Methods of test for coated fabrics - Determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
AS 3778.3.7:2007 Measurement of water flow in open channels - Velocity-area methods - Measurement by ultrasonic (acoustic) method
AS/NZS 1301.426s:1994 Methods of test for pulp and paper - Determination of thickness and apparent bulk density or apparent sheet density
AS/NZS 2111.3:1996 Textile floor coverings - Tests and measurements - Determination of mass per unit area
AS 1012.5:1999 Methods of testing concrete - Determination of mass per unit volume of freshly mixed concrete
AS/NZS 4257.3:1994 Plastic roof and wall cladding materials - Methods of test - Determination of mass per unit area of sheet
AS 3778.3.8:2007 Measurement of water flow in open channels - Velocity-area methods - Electromagnetic method using a full-channel-width coil
AS 3778.3.4:1990/Amdt 1:1991
AS/NZS 4347.2:1995 Damp-proof courses and flashings - Methods of test - Determination of continuity of coating on metal centres
AS 2836.3:1998 Methods of testing surgical dressing and surgical dressing materials - Method for the determination of mass per unit area
AS/NZS 2111.11:1996 Textile floor coverings - Tests and measurements - Determination of total pile mass per unit area by complete dissection

RO-ASRO, Test center area

STAS 8972/2-1981 Hydrometry LIQUID FLOOR MEASUREMENT IN OPEN CHANNELS Velocity-area methods
STAS 12708-1989 WOVEN FABRICS Determination of mass of warp and weft per unit area of fabric

Association Francaise de Normalisation, Test center area

NF P98-863-3*NF EN 13863-3:2005 Concrete pavements - Part 3 : test methods for the determination of the thickness of a concrete pavement from cores
NF T60-265*NF EN ISO 15301:2001 Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method
NF ISO 3734:2000 Produits pétroliers - Détermination de la teneur en eau et en sédiments dans les fuel-oils résiduels - Méthode par centrifugation
NF EN ISO 15301:2001 Corps gras d'origines animale et végétale - Détermination de la teneur en sédiment dans des corps gras bruts - Méthode par centrifugation
NF P90-329*NF EN 17125:2018 Domestic spas/whirpool spas/hot tubs - Safety requirements and test methods
NF C15-105:1991 Determination of cross-sectional area of conductors and selection of protective devices
NF X10-301*NF EN ISO 748:2021 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements
NF X10-112:1977 Measurement of fluid flow in closed conduites.velocity area method using pitot static tubes.
NF ISO 5682-3:2017 Matériel de protection des cultures - Équipement de pulvérisation - Partie 3 : méthode d'essai pour évaluer les performances des systèmes de régulation du volume/surface
NF X10-112*NF ISO 3966:2021 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes
NF E60-172-7*NF ISO 10791-7:2020 Test conditions for machining centres - Part 7 : accuracy of finished test pieces
NF G52-011*NF EN ISO 2420:2017 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area
NF ISO 13041-7:2004 Conditions d'essai des tours à commande numérique et des centres de tournage - Partie 7 : évaluation des performances en contournage dans les plans de coordonnées
NF G52-014:1976 DETERMINATION OF RESISTANCE OF LEATHER TO TEARING (ON SPECIMEN HAVING A SLIT IN THE CENTRE).
NF ISO 10791-6:2015 Conditions d'essai pour centres d'usinage - Partie 6 : précision des vitesses et interpolations
NF M60-768:2012 Measurement of radioactivity in the environment - Air : radon-222 - Part 7 : accumulation method for estimating surface exhalation rate.
NF EN 13036-1:2010 Caractéristiques de surface des routes et aérodromes - Méthodes d'essai - Partie 1 : mesurage de la profondeur de macrotexture de la surface d'un revêtement à l'aide d'une technique volumétrique à la tâche
NF G07-171-1*NF EN 29073-1:1992 Textiles. Test methods for nonwovens. Part 1 : determination of mass per unit area.
NF G07-169:1994 Textiles. Tests for knitted fabrics. Determination of number of stiches per unit length and unit surface.
NF B42-006:1996 Advanced technical ceramics. Methods of test for ceramic powders. Part 6 : determination of the specific surface area.
NF ISO 24253-1:2015 Matériel de protection des cultures - Essais de dépôt de la pulvérisation sur les grandes cultures - Partie 1 : mesurage dans un plan horizontal
NF P98-244:1993 Test relating to pavements. Measurement of the position of steel in cement concrete.
XP T47-769*XP CEN/TS 17510:2020 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorptionX
NF M60-763-7*NF EN ISO 11665-7:2016 Measurement of radioactivity in the environment - Air : radon-222 - Part 7 : accumulation method for estimating surface exhalation rate
NF EN 17125:2018 Spas domestique et les spas - Les exigences de sécurité et méthodes d'essai

Professional Standard - Textile, Test center area

FZ/T 60046-2016 Determination of mass per unit area of towel product

Professional Standard - Agriculture, Test center area

GB 2922-1982 Test method for specific surface area of chromatographic carrier for chemical reagents

American National Standards Institute （ANSI), Test center area

ANSI/ASME MFC-18M-2001 Measurement of Fluid Flow in Pipes Using Variable Area Meters
BS EN ISO 9073-1:2023 Nowovens. Test methods Determination of mass per unit area (British Standard)
ANSI/ASTM D4803:2010 Test Method for Predicting Heat Buildup in PVC Building Products
ANSI/ASTM E2619:2009 Practice for Measuring and Calculating Building Loss Features that Take Up Floor Area in Buildings

ES-AENOR, Test center area

UNE 55-910-1985

国家市场监督管理总局、中国国家标准化管理委员会, Test center area

GB/T 38691-2020 Testing method for specific surface area of petroleum refining catalysts
GB/T 33779.3-2021 Guidance for special characteristic of optical fibre—Part 3: Effective area (Aeff)
GB/T 39500-2020 Leather—Physical and mechanical tests—Determination of apparent density and mass per unit area
GB/Z 38062-2019 Nanotechnologies—Determination of specific surface area of graphene materials—Methylene blue adsorption method
GB/T 40331.1-2021 Crop protection equipment—Spray deposition test for field crop—Part 1:Measurement in a horizontal plane

IN-BIS, Test center area

Danish Standards Foundation, Test center area

DS/EN 1288-5:2001 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
DS/EN 1288-2:2001 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
DS/EN 15221-6:2012 Facility Management - Part 6: Area and Space Measurement in Facility Management
DS/EN 772-2/A1:2006 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
DS/EN 14736:2004 Space product assurance - Quality assurance for test centres
DS/EN 772-2:1999 Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)
DS/EN 13036-1:2011 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
DS/EN 29073-1:1993 Textiles. Test methods for nonwoven. Part 1: Determination of mass per unit area
DS/ISO 9073-1:1993 Textiles - Test methods for nonwovens - Part 1: Determination of mass per unit areal

Lithuanian Standards Office , Test center area

LST EN 1288-5-2002 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
LST EN 1288-2-2002 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
LST EN 15221-6-2012 Facility Management - Part 6: Area and Space Measurement in Facility Management
LST EN 772-2-2000/A1-2005 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
LST EN 14736-2004 Space product assurance - Quality assurance for test centres
LST EN 772-2-2000 Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)
LST EN 13036-1-2010 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
LST EN ISO 105-X16:2003 Textiles - Tests for colour fastness - Part X16: Color fastness to rubbing - Small areas (ISO 105-X16:2001)
LST CEN/TS 17510-2020 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption
LST EN 29073-1-2000 Textiles - Test methods for nonwovens - Part 1: Determination of mass per unit area

KR-KS, Test center area

KS B ISO 10791-8-2016 Test conditions for machining centres — Part 8: Evaluation of contouring performance in the three coordinate planes
KS B ISO 13041-7-2018 Test conditions for numerically controlled turning machines and turning centres — Part 7: Evaluation of contouring performance in the coordinate planes
KS K ISO 9073-1-2018 Textiles — Test methods for nonwovens — Part 1: Determination of mass per unit area
KS C IEC 60093-2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
KS F 2449-2022 Test method for air content of fresh concrete by the volumetric method
KS B ISO 10791-10-2016 Test conditions for machining centres — Part 10: Evaluation of thermal distortions
KS B ISO 10791-8-2021 Test conditions for machining centres — Part 8: Evaluation of contouring performance in the three coordinate planes
KS K ISO 9073-1-2018(2023) Textiles — Test methods for nonwovens — Part 1: Determination of mass per unit area
KS B ISO 13041-6-2018 Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece

Japanese Industrial Standards Committee (JISC), Test center area

JIS K 6404-2-2:1999 Testing methods for rubber-or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of the total mass per unit area, coating mass per unit area, and mass per unit area of the substrate
JIS A 1118:1997 Method of test for air content of fresh concrete by volumetric method
JIS B 1861:2016 V-belts and V-ribbed belts -- Test method for determination of centre distance variation
JIS A 1104 ERRATUM 1:2000 Methods of test for bulk density of aggregates and solid content in aggregates (Erratum 1)

API - American Petroleum Institute, Test center area

API STD 2542-1968 STANDARD METHODS OF TEST FOR WATER AND SEDIMENT IN CRUDE OILS
API MPMS 10.6-2002 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 6 - Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) (Third Edition)
API MPMS 10.6-2004 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 6 - Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) (Fourth Edition)
API MPMS 10.6-2013 Manual of Petroleum Measurement Standards Chapter 10.6 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) (FIFTH EDITION)
API MPMS 10.3-1981 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 3 - Determination of Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (ASTM D4007)
API MPMS 10.3-2003 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 3 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (Second Edition)
API MPMS 10.4-1988 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 4 - Determination of Sediment and Water in Crude Oil by the Centrifuge Method (Field Procedure) (ASTM D96-88) (R 1993)
API MPMS 10.6-1995 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 6 - Determination of Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) (Second Edition; ASTM D1796)
API MPMS 10.4-1999 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 4 - Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure) (Third Edition)
API MPMS 10.3-2013 Manual of Petroleum Measurement Standards Chapter 10.3 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (FOURTH EDITION)
API MPMS 10.3-2008 Manual of Petroleum Measurement Standards Chapter 10—Sediment and Water Section 3—Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (THIRD EDITION)
API MPMS 10.4-1970 Manual of Petroleum Measurement Standards Chapter 10-Sediment and Water Section 4-Standard Methods of Test for Water and Sediment in Crude Oils

Canadian General Standards Board （CGSB), Test center area

CGSB 148.1 NO.2-M85-CAN/CGSB-1985 Methodes D'Essai Pour Geotextiles Et Geomembranes Masse Surfacique

Group Standards of the People's Republic of China, Test center area

T/CCSA 267-2019 Test specification for micro modular data center
T/CCSA 266-2019 Test specification for SSD of data centers
T/CCSA 326-2021 Test method of general server in data center
T/CCSA 265-2019 Test specification for HDD of data centers
T/SHSIC 0101-2023
T/CCSA 268-2019 Power usage effectiveness ( PUE ) test specification for micromodel data center
T/DZJN 43-2021 Calculation of energy efficiency ratings and test methods for data centers
T/AI 118.2-2022 Artificial intelligence computing centre Part 2：Test approaches
T/CCSA 244-2019 SDN Test Standard for Technical Competency of Banking Datacenter Cloud
T/CCSA 327-2021 Technical requirements and test methods of carbon usage effectiveness for data center
T/CCSA 430-2023 Test and evaluation method for seismic performance of data center server
T/CCSA 429-2023 Technology requirements of test and evaluation method for seismic performance of data center switch

工业和信息化部, Test center area

YD/T 3984-2021 Micro Modular Data Center Test Specification
YD/T 3885-2021 Data center switch equipment VxLAN testing method
YD/T 4023-2022 Micro module data center energy efficiency (PUE) test specifications
YD/T 3399-2018 Telecom Internet Data Center (IDC) Network Equipment Testing Method

RU-GOST R, Test center area

GOST R ISO 3734-2009 Petroleum products. Determination of water and sediment content in residual fuel oils by centrifuge method
GOST R 50289-1992 Hollow insulators for use in electrical equipment. Test methods
GOST R 50499-1993 Solid electrical insulating materials. Methods of test for volume resistivity and surface resistivity

AENOR, Test center area

UNE-EN 15221-6:2012 Facility Management - Part 6: Area and Space Measurement in Facility Management
UNE 15450-8:2001 Machine-tools. Test conditions for machining centres. Part 8: Evaluation of the contouring performance in the three coordinate planes.
UNE 40293:1975 MACHINE MADE TESTILE FLOOR COVERINGS. DETERMINATION OF MASS PER UNIT AREA.
UNE-EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas.
UNE-EN 1288-2:2000 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas.
UNE-EN 13036-1:2010 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
UNE-EN 2329:1996 AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF MASS PER UNIT AREA.
UNE 21303:1983 METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS.
UNE-EN 29073-1:1993 TEXTILES. TEST METHODS FOR NONWOVENS. PART 1: DETERMINATION OF MASS PER UNIT AREA. (ISO 9073-1:989)

CEN - European Committee for Standardization, Test center area

PREN 15221-6-2018 Facility Management - Part 6: Area and Space Measurement in Facility Management
EN 17125:2018 Domestic spas/whirlpool spas/hot tubs - Safety requirements and test methods

FI-SFS, Test center area

SFS 3285-1975

Military Standard of the People's Republic of China-General Armament Department, Test center area

GJB 350.79-1987 Surface Combat Ship Mooring and Navigation Test Procedures Combat Intelligence Center Test

未注明发布机构, Test center area

BS EN 772-2:1998(2006) Methods of test for masonry units — Part 2 : Determination of percentage area of voids in masonry units (by paper indentation)
BS EN 2329:1993(1999) Textile glass fibre preimpregnates — Test method for the determination ofmass per unit area
VDI VDE 2602 Blatt 3-2018 Surface testing, specification of surface conditions in technical product documentation, Surface measurement, Specification of surface conditions in technical product documentation
VDI VDE 2602 Blatt 3-2012 Surface testing Specification of surface conditions in technical product documentation Surface measurement Specification of surface conditions in technical product documentation
BS 5507-1:1977(2010) Methods of test for Falsework equipment — Part 1 : Floor centres

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Test center area

ASHRAE 164.1-2008 Method of Test for Residential Central-System Humidfiers

US-FCR, Test center area

FCR AF AFI AFMC 21-119-2000 OBJECTIVE CENTER/TEST WING AIRCRAFT MAINTENANCE MANAGEMENT POLICY
FCR COE CRD-C 231-63-1963 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TEST FOR VOLUME CHANGES IN NEAT CEMENT BARS

Institute of Electrical and Electronics Engineers (IEEE), Test center area

IEEE Std 1450.6.2-2014 IEEE Standard for Memory Modeling in Core Test Language
RP 104:2005 RP 104:2005 - SMPTE Recommended Practice - Cross-Modulation Tests for Variable-Area Photographic Audio Tracks

(U.S.) Ford Automotive Standards, Test center area

FORD FLTM BI 105-1-2001 CONICAL MANDREL TEST FOR PAINTED PANELS (Replaces FLTM BI 005-01)

IT-UNI, Test center area

UNI 4288-1972
UNI 4870-1961
UNI CEN/TS 17510-2021 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption

AT-ON, Test center area

ONORM EN 2243 Teil.4-1991 Aerospace series - Structural adhesives - Test methods - Part 4: Metal-honeycomb core flatwise tensile test
ONORM S 4074-1990 Cross-country ski - Binding moun ting area- Requirements on fest screws - marking of conformity Skis de fand - Zone de montage de la fixation - Exigences pour des vis d'essai
ONORM EN 29073-1-1993 Textiles - Test methods for nonwovens -Determination of mass per unit area
ONR CEN/TS 17510-2021 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption

TR-TSE, Test center area

TS 3072-1978 Measurement Of Clean Water Flow In Closed Conduits - Velocity - Area Method Using Current - Meters

Canadian Standards Association (CSA), Test center area

CSA Z317.11-2003 Mesurage des aires dans les établissements de santé (Deuxième édition; Mise à jour no 1: Novembre 2003)

Malaysia Standards, Test center area

MS 961-1985

Professional Standard - Post and Telecommunication, Test center area

YD/T 4414-2023
YD/T 4280-2023 5G mobile communication network N4 (core network control plane and user plane) interface technical requirements and test methods

Professional Standard - Aerospace, Test center area

QJ 2220.2-1992 Test methods for electrical insulation properties of coatings Test methods for insulation resistance, surface resistivity, and volume resistivity

Liaoning Provincial Standard of the People's Republic of China, Test center area

DB21/T 2837-2017 On-site test method for mass per unit area of polymer waterproof material composite sheet (FS2)

The American Road & Transportation Builders Association, Test center area

AASHTO T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate

AASHTO - American Association of State Highway and Transportation Officials, Test center area

T 19M/T 19-2009 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
T 19M/T 19-2000 Standard Method of Test for Bulk Density ( Unit Weight ) and Voids in Aggregate

International Telecommunication Union (ITU), Test center area

ITU-T M.734-1988 Exchange of information on incoming test facilities at international switching centres
ITU-T R.79-1989 Automatic Tests of Transmission Quality on Telegraph Circuits between Switching Centres - Telegraph Transmission Study Group IX; 8 pp
ITU-T M.734 FRENCH-1988 Exchange of information on incoming test facilities at international switching centres
ITU-T M.734 SPANISH-1988 Exchange of information on incoming test facilities at international switching centres
ITU-T R.79 FRENCH-1988 AUTOMATIC TESTS OF TRANSMISSION QUALITY ON TELEGRAPH CIRCUITS BETWEEN SWITCHING CENTRES
ITU-T R.79 SPANISH-1988 AUTOMATIC TESTS OF TRANSMISSION QUALITY ON TELEGRAPH CIRCUITS BETWEEN SWITCHING CENTRES

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Test center area

ITU-T R.79-1988 AUTOMATIC TESTS OF TRANSMISSION QUALITY ON TELEGRAPH CIRCUITS BETWEEN SWITCHING CENTRES

Professional Standard - Railway, Test center area

TB/T 2606-1996 Zhuan 8A side frame spring bearing platform facing the vertical center line of the side frame verticality measurement and inspection tool