ZH
RU
ES

Analysis Principle of Ultraviolet Spectroscopy

Analysis Principle of Ultraviolet Spectroscopy, Total:500 items.

In the international standard classification, Analysis Principle of Ultraviolet Spectroscopy involves: Analytical chemistry, Vocabularies, Education, Paints and varnishes, Paint ingredients, Water quality, Optics and optical measurements, Petroleum products in general, Non-ferrous metals, Products of the textile industry, Burners. Boilers, Farming and forestry, Coals, Protection against crime, Inorganic chemicals, Lubricants, industrial oils and related products, Optoelectronics. Laser equipment, Ferroalloys, Iron and steel products, Testing of metals, Fertilizers, Standardization. General rules, Products of the chemical industry, Refractories, Milk and milk products, Metalliferous minerals, Corrosion of metals, Fuels, Glass, Ferrous metals, Products of non-ferrous metals, Air quality, METALLURGY, Medical sciences and health care facilities in general, Acoustics and acoustic measurements, Road engineering, Thermodynamics and temperature measurements, Surface treatment and coating, Cereals, pulses and derived products, Soil quality. Pedology, Seals, glands, Shafts and couplings.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Analysis Principle of Ultraviolet Spectroscopy

GB/T 25481-2010 On-line ultraviolet/visible spectrum analyzer
GB/T 34796-2017(英文版) Quantification and purity analysis of nucleic acid concentration in solution—Ultraviolet spectrophotometry
GB/T 12153-1989 Analysis of water used in boiler and cooling system--Determination for mineral oil--Ultraviolet spectrophotometry
GB/T 19267.2-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 2:Ultraviolet-visible absorption spectroscopy
GB/T 19267.2-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 2: Ultraviolet-visible absorption spectroscopy
GB/T 14422-1993 Analysis of water used in boiler and cooling system. Determination of benzotriazole. Ultraviolet spectrophotometry
GB/T 12689.9-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of antimony content-The atomic fluorescence spectrometer and the flame atomic absorption spectrometric method
GB/T 8151.15-2005 Methods for chemical analysis of zinc concentrates-Determination of mercury content-Atomic fluorescence spectrometry method
GB/T 8152.11-2006 Methods for chemical analysis of lead concentrates. Determination of mercury content. Atomic fluorescence spectrometer method
GB/T 8152.5-2006 Methods for chemical analysis of lead concentrates. Determination of arsenic content. Atomic fluorescence spectrometer method
GB/T 4325.3-2013 Methods for chemical analysis of molybdenum.Part 3:Determination of bismuth content.Atomic fluorescence spectrometry
GB/T 4325.4-2013 Methods for chemical analysis of molybdenum.Part 4:Determination of tin content.Atomic fluorescence spectrometry
GB/T 4325.5-2013 Methods for chemical analysis of molybdenum.Part 5:Determination of antimony content.Atomic fluorescence spectrometry
GB/T 4325.6-2013 Methods for chemical analysis of molybdenum.Part 6:Determination of arsenic content.Atomic fluorescence spectrometry
GB/T 29559-2013 Surface chemical analysis.Analysis of zinc and/or aluminium based metallic coatings by glow discharge optical emission spectrometry
GB/T 14423-1993 Analysis of water used in boiler and cooling system. 2-Mercaptobenzothiazole. Ultraviolet spectrophotometry
GB/T 6150.10-2023 Methods of chemical analysis of tungsten concentrates - Part 10: Determination of lead content by hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
GB/T 6150.15-2023 Methods for chemical analysis of tungsten concentrates - Part 15: Determination of bismuth content by hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
GB/T 12689.2-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of arsenic content-The atomic fluorescence spectrometer method
GB/T 14849.10-2016 Methods for chemical analysis of industrial silicon - Part 10: Determination of mercury content by atomic fluorescence spectrometry
GB/T 6150.17-2022 Methods for chemical analysis of tungsten concentrates—Part 17：Determination of antimony content—Atomic fluorescence spectrometry
GB/T 11066.2-2008 Methods for chemical analysis of gold.Determination of silver content.Flame atomic absorption spectrometry
GB/T 11066.3-2008 Methods for chemical analysis of gold.Determination of iron content.Flame atomic absorption spectrometry
GB/T 8647.2-2006 The methods for chemical analysis of nickel. Determination of aluminium content. Electrothermal atomic absorption spectrometric method
GB/T 8647.5-2006 The methods for chemical analysis of nickel. Determination of magnesium content. Flame atomic absorption spectrometric method
GB/T 11067.2-2006 Methods for chemical analysis of silver. Determination of copper contents. Flame atomic absorption spectrometric method
GB/T 11067.6-2006 Methods for chemical analysis of silver. Determination of iron contents. Flame atomic absorption spectrometric method
GB/T 20931.1-2007 Methods for chemical analysis of lithium Determination of potassium content Flame atomic absorption spectrometric method
GB/T 20931.10-2007 Methods for chemical analysis of lithium Determination of copper content Flame atomic absorption spectrometric method
GB/T 20931.11-2007 Methods for chemical analysis of lithium Determination of magnesium content Flame atomic absorption spectrometric method
GB/T 20931.2-2007 Methods for chemical analysis of lithium Determination of sodium content Flame atomic absorption spectrometric method
GB/T 20931.3-2007 Methods for chemical analysis of lithium Determinationof calcium content Flame atomic absorption spectrometric method
GB/T 4324.15-2008 Methods for chemical analysis of tungsten.Determination of magnesium content.The flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
GB/T 3253.6-2008 Methods for chemical analysis of antimony and antimony trioxide.Determination of selenium content.Atomic fluorenscence spectrophotometric method
GB/T 3253.10-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of mercury content.Atomic fluorescence spectrometric method
GB/T 3253.7-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of bismuth content.Atomic fluorescence spectrometric method
GB/T 23364.1-2009 Methods for chemical analysis of high purity indium oxide.Part 1:Determination of arsenic content.Atomic fluorescence spectrometry
GB/T 23364.3-2009 Methods for chemical analysis of high purity indium oxide.Part 3:Determination of antimony content.Atomic fluorescenece spectrometry
GB/T 4324.9-2012 Methods for chemical analysis of tungsten.Part 9:Determination of cadmium content.Inductively-coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
GB/T 3884.11-2005 Methods for chemical analysis of copper concentrates-Determination of mercury content-Cold atomic absorption spectrometric method
GB/T 1819.17-2006 Methods for chemical analysis of tin concentrates. Determination of mercury content. The cold vapor atomic absorption spectrometric method
GB/T 11066.9-2009 Methods for chemical analysis of gold.Determination for arsenic and tin contents.Hydride generation-atomic fluorescence spectrometry
GB/T 6150.13-2022 Methods for chemical analysis of tungsten concentrates—Part 13：Determination of arsenic content—Atomic fluorescence spectrometry and the silver diethyldithiocarbamate（DDTC-Ag）spectrophotometry
GB/T 23362.1-2009 Methods for chemical analysis of high purity indium hydroxide.Part 1:Determination of arsenic content.Atomic fluorescence spectrometry
GB/T 23362.3-2009 Methods for chemical analysis of high purity indium hydroxide.Part 3:Determination of antimony content.Atomic fluorescene spectrometry
GB/T 6150.11-2008 Methods for chemical analysis of tungsten concentrates.Determination of zinc content.Flame atomic absorption spectrometric method
GB/T 1819.7-2004 Methods for chemical analysis of tin concentrates Determination of bismuth content-Flame atomic absorption spectrometric method
GB/T 1819.8-2004 Methods for chemical analysis of tin concentrates Determination of zinc content-Flame atomicabsorption spectrometric method
GB/T 8151.16-2005 Methods for chemical analysis of zinc concentrates-Determination of cobalt content-Flame atomic absorption spectrometer method
GB/T 1819.14-2006 Methods for chemical analysis of tin concentrates. Determination of copper content. Flame atomic absorption spectrometric method
GB/T 1819.16-2006 Methods for chemical analysis of tin concentrates. Determination of silver content. Flame atomic absoption spectrometric method
GB/T 11067.5-2006 Methods for chemical analysis of silver. Determination of lead and bismuth contents. Flame atomic absorption spectrometric method
GB/T 6150.9-2009 Methods for chemical analysis of tungsten concentrates.Determination of copper content.Flame atomic absorption spectrometry
GB/T 8152.12-2006 Methods for chemical analysis of lead concentrates. Determination of cadmium content. Flame atomic absorption spectrometric method
GB/T 8152.7-2006 Methods for chemical analysis of lead concentrates. Determination of copper content. Flame atomic absorption spectrometric method
GB/T 6150.10-2008 Methods for chemical analysis of tungsten concentrates.Determination of lead content.Flame atomic absorption spectrometric method
GB/T 6150.15-2008 Methods for chemical analysis of tungsten concentrates.Determination of bismuth content.Flame atomic absorption spectrometric method
GB/T 32179-2015 Chemical analysis of refractories.General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES) methods
GB/T 6150.13-2008 Methods for chemical analysis of tungsten concentrates.Determination of arsenic content.Hydride reduction atomic absorption spectrometry and the silver diethyldithiocarbamate(DDTC-Ag) photometry
GB/T 1819.6-2004 Methods for chemical analysis of tin concentrates Determination of antimony content-The malachite green spectrometric method and the flame atomic absorption spectrometric method
GB/T 23278.4-2009 Methods for chemical analysis of sodium stannate.Part 4:Determination of lead content.Flame atomic absorption spectrometry
GB/T 4324.1-2012 Methods for chemical analysis of tungsten.Part 1:Determination of lead content.Flame atomic absorption spectrometry
GB/T 4324.10-2012 Methods for chemical analysis of tungsten.Part 10:Determination of copper content.Flame atomic absorption spectrometry
GB/T 4324.17-2012 Methods for chemical analysis of tungsten.Part 17:Determination of sodium content.Flame atomic absorption spectrometry
GB/T 4324.18-2012 Methods for chemical analysis of tungsten.Part 18:Determination of potassium content.Flame atomic absorption spectrometry
GB/T 4325.2-2013 Methods for chemical analysis of molybdenum.Part 2:Determination of cadmium content.Flame atomic absorption spectrometry
GB/T 4325.10-2013 Methods for chemical analysis of molybdenum.Part 10:Determination of copper content.Flame atomic absorption spectrometry
GB/T 4325.13-2013 Methods for chemical analysis of molybdenum.Part 13:Determination of calcium content.Flame atomic absorption spectrometry
GB/T 4325.14-2013 Methods for chemical analysis of molybdenum.Part 14:Determination of magnesium content.Flame atomic absorption spectrometry
GB/T 4325.15-2013 Methods for chemical analysis of molybdenum.Part 15:Determination of sodium content.Flame atomic absorption spectrometry
GB/T 4325.16-2013 Methods for chemical analysis of molybdenum.Part 16:Determination of potassium content.Flame atomic absorption spectrometry
GB/T 4325.20-2013 Methods for chemical analysis of molybdenum.Part 20:Determination of manganese content.Flame atomic absorption spectrometry
GB/T 3260.1-2013 Methods for chemical analysis of tin.Part 1:Determination of copper content.Flame atomic absorption spectrometric method
GB/T 3260.4-2013 Methods for chemical analysis of tin.Part 4:Determination of lead content.Flame atomic absorption spectrometric method
GB/T 3260.7-2013 Methods for chemical analysis of tin.Part7:Determination of aluminium content.Electrothermal atomic absorption spectrometric method
GB/T 3260.8-2013 Methods for chemical analysis of tin.Part 8:Determination of zinc content.Flame atomic absorption spectrometric method
GB/T 3260.10-2013 Methods for chemical analysis of tin.Part 10:Determination of cadmium content.Flame atomic absorption spectrometric method
GB/T 3260.3-2013 Methods for chemical analysis of tin.Part 3:Determination of bismuth content.KI photometric method and flame atomic absorption spectrometric method
GB/T 4325.8-2013 Methods for chemical analysis of molybdenum.Part 8:Determination of cobalt content.5-CI-PADAB spectrophotometry and flame atomic absorption spectrometry

国家市场监督管理总局、中国国家标准化管理委员会, Analysis Principle of Ultraviolet Spectroscopy

GB/T 41072-2021 Surface chemical analysis—Electron spectroscopies—Guidelines for ultraviolet photoelectron spectroscopy analysis
GB/T 37186-2018 Gas analysis—Determination of sulfur dioxide and nitrogen oxides—Ultraviolet differential optical absorption spectroscopy
GB/T 37396.1-2019 Lasers and laser-related equipment—Standard optical components—Part 1: Components for the UV,visible and near-infrared spectral ranges

German Institute for Standardization, Analysis Principle of Ultraviolet Spectroscopy

DIN 51009:2013-11 Optical atomic spectral analysis - Principles and definitions
DIN 51009:2013 Optical atomic spectral analysis - Principles and definitions
DIN 51009:2001 Optical atomic spectral analysis - Principles and definitions
DIN 55673:2000 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
DIN 55673:2017 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
DIN 55673:2017-04 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
DIN 51451:2020-02 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
DIN 51451:2004 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
DIN 51451:2020 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
DIN 51820:2013-12 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum / Note: Applies in conjunction with DIN 51451 (2004-09).
DIN 51820-1:1989 Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum
DIN EN ISO 11151-1:2015-12 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
DIN 51820:2013 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum
DIN CEN/TS 17784-1:2022-07 Organo-mineral fertilizers - Identification of complexing agents - Part 1: Method using UV-Vis spectrophotometry and gravimetry; German version CEN/TS 17784-1:2022
DIN 51418-1:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN 51418-1:2008-08 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN 38404-3:2005 German standard methods for the examination of water, waste water and sludge - Physical and physicochemical parameters (group C) - Part 3: Determination of spectral absorption in the UV range, Spectral absorptions coefficient (C 3)
DIN EN ISO 26845:2008-06 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008); German version EN ISO 26845:2008
DIN 51451:2023-10 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles / Note: Date of issue 2023-08-25*Intended as replacement for DIN 51451 (2020-02).
DIN EN 12396-3:2000-10 Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV-spectrometric xanthogenate method; German version EN 12396-3:2000
DIN 51418-1:2008 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN V ENV 13800:2000 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES) without separation of the lead matrix; German version ENV 13800:2000
DIN V ENV 14029:2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix; German version ENV 14029:2001
DIN EN 12938:2000 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry (includes AC:2000); German version EN 12938:1999 + AC:2000
DIN 3761-14:1984 Rotary shaft lip type seals for automobils; test; infrared-spectroscopic analysis of elastomers

Professional Standard - Education, Analysis Principle of Ultraviolet Spectroscopy

JY/T 0570-2020 General rules for ultraviolet and visible absorption spectrometry

Association Francaise de Normalisation, Analysis Principle of Ultraviolet Spectroscopy

NF ISO 4735:2002 Huiles essentielles de Citrus - Détermination de la valeur CD par analyse spectrométrique dans l'ultraviolet
NF S10-111-1*NF EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges
NF EN ISO 11151-1:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 1 : composants pour les plages spectrales UV, visible et proche de l'infrarouge
NF U44-145:1984 FERTILIZERS AND SOILS CONDITIONERS. DETERMINATION OF MAGNESIUM BY ATOMIC ABSORPTION SPECTROMETRIC METHOD.
NF A06-001:1979 Analysis of light metals by spectrography. Processing of test results. Statistical interpretation.
NF A22-402:1979 Chemical analysis of manganese ores. Determination of iron. Atomic absorption spectrometric method.
XP CEN/TS 17784-1:2022 Engrais organo-minéraux - Identification des agents complexants - Partie 1 : méthode utilisant la spectrophotométrie UV-Vis et la gravimétrie
NF X31-408*NF ISO 11264:2008 Soil quality - Determination of herbicides - Method using HPLC with UV-detection
NF ISO 7530-9:2007 Alliages de nickel - Analyse par spectrométrie d'absorption atomique dans la flamme - Partie 9 : dosage du vanadium
FD A08-300:2021 Analyse chimique des aciers et des fontes - Elaboration et emploi de méthodes d'analyse par spectrométrie d'absorption atomique dans la flamme
NF EN ISO 26845:2008 Analyse chimique des matériaux réfractaires - Exigences générales pour les méthodes d'analyse chimique par voie humide, par spectrométrie d'absorption atomique (AAS) et par spectrométrie d'émission atomique avec plasma induit par haute fréq...
NF B40-672*NF EN ISO 26845:2008 Chemical analysis of refractories . General requirements for wet chemicals analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
NF A08-553:2010 Chemical analysis of aluminium and its alloys - Determination of zinc - Atomic absorption spectrometric method
NF A08-556:2010 Chemical analysis of aluminium and its alloys - Determination of chromium - Atomic absorption spectrometric method
NF A08-547:2010 Chemical analysis of aluminium and its alloys - Determination of lead - Atomic absorption spectrometric method
NF A08-709:1983 Chemical analysis of copper alloys. Determination of antimony content. Atomic absorption spectrometry method.
NF A08-341:1987 Chemical analysis of steel. Determination of silicon content. Flame atomic absorption spectrometric method.
NF A08-309:2018 Chemical analysis of steels - Determination of molybdenum content - Flame atomic absorption spectrometric method
NF A08-344:1996 Steel and iron. Determination of vanadium content. Flame atomic absorption spectrometric method.
NF ISO 7530-8:2007 Alliages de nickel - Analyse par spectrométrie d'absorption atomique dans la flamme - Partie 8 : dosage du silicium
NF A08-309:1985 Chemical analysis of steel and cast iron. Determination of molybdenum content. Flame atomic absorption spectrometric method.
NF A08-349:2020 Analyse chimique des aciers et des fontes - Détermination du cobalt - Méthode par spectrométrie d'absorption atomique dans la flamme
NF A08-903:1991 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 3 : determination of chromium content.
NF A08-904:1991 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 4 : determination of copper content.
NF A08-905:1991 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 5 : determination of iron content.
NF A08-906:1991 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 6 : determination of manganese content.
NF M07-073:2001 Petroleum products - Determination of the content of total aromatic hydrocarbons in saturated fractions - Ultra-Violet absorbance spectrometric method for low contents.
NF A06-841-7*NF EN 12441-7:2005 Zinc and zinc alloys - Chemical analysis - Part 7 : determination of tin - Flame atomic absorption spectrometric method after extraction.
NF EN ISO 21587-3:2007 Analyse chimique des produits réfractaires d'aluminosilicates (méthode alternative à la méthode par fluorescence de rayons X) - Partie 3 : méthodes par spectrométrie d'absorption atomique (AAS) et spectrométrie d'émission atomique avec plasm...
NF A10-186:1977 Chemical analysis of ferroalloys. Determination of aluminium in ferrosilicon. Atomic absorption spectrometric method.
NF A08-349:1984 Chemical analysis of steel and cast iron. Determination of cobalt content. Flame atomic absorption spectrometric method.
NF X21-004*NF ISO 22309:2012 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above.
NF A08-001:1979 Analyse chimique des métaux et alliages légers - Application de la spectrométrie d'absorption atomique à l'analyse de l'aluminium, du magnésium et de leurs alliages

AENOR, Analysis Principle of Ultraviolet Spectroscopy

UNE 77401:1992 ECOTOXICOLOGY. DETERMINATION OF UV-VIS ABSORPTION SPECTRA.
UNE-EN 12396-3:2001 Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Part 3: UV spectrometric xanthogenate method.
UNE 36329-1:1991 CHEMICAL ANALYSIS OF FERROUS METAL. DETERMINATION OF COPPER CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.

Professional Standard - Environmental Protection, Analysis Principle of Ultraviolet Spectroscopy

HJ 756-2015 Determination of water quality butyl xanthate by UV spectrophotometry

Korean Agency for Technology and Standards (KATS), Analysis Principle of Ultraviolet Spectroscopy

KS M 9102-1996 Water quality-Determination of total mercury by flameless atomic absorption spectrometry(Method after pretreatment with ultraviolet radiation)
KS D 2568-2008 Tantalum－Method for atomic absorption spectrometric analysis
KS M 9102-1996(2001) WATER QUALITY-DETERMINATION OF TOTAL MERCURY BY FLAMELESS ATOMIC ABSORPTION SPECTROMETRY(METHOD AFTER PRETREATMENT WITH ULTRAVIOLET RADITION)
KS D 1659-2008 Methods for atomic absorption spectrophotometric analysis of iron and steel
KS D 2086-2019 Methods for atomic emission spectrometric analysis of titanium
KS B ISO 11151-1-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
KS D 1652-2007 Iron and steel-Method for spark discharge atomic emission spectrometric analysis
KS D 1679-2008 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
KS M ISO 78-4:2010 Layouts for standards－Part 4：Standard for atomic absorption spectrometric analysis
KS L ISO 26845-2012(2022) Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
KS L ISO 26845-2012(2017) Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
KS D 1679-2020 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
KS L ISO 26845:2012 Chemical analysis of refractories-General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
KS D ISO 10700:2008 Steel and iron-Determination of manganese content-Flame atomic absorption spectrometric method
KS D 1658-2003 Emission-spectroscopic analysis for carbon steel and low alloy steel
KS D ISO 9647:2002 Steel and iron?Determination of vanadium content — Flame atomic absorption spectrometric method
KS I ISO 20552:2021 Workplace air — Determination of mercury vapour —Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
KS I ISO 20552:2010 Workplace air－Determination of mercury vapour－Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
KS D ISO 7530-4-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 4：Determination of copper content
KS D ISO 7530-2-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 2：Determination of cobalt content
KS D ISO 7530-9-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 9：Determination of vanadium content
KS D ISO 7530-7-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 7：Determination of aluminium content
KS D ISO 7530-6-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 6：Determination of manganese content
KS D ISO 7530-3-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 3：Determination of chromium content
KS D ISO 7530-8-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 8：Determination of silicon content
KS I ISO 20552-2010(2016) Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
KS I 20552-2010 Workplace air-Determination of mercury vapour-Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
KS D ISO 7530-9:2012 Nickel alloys-Flame atomic absorption spectrometric analysis-Part 9:Determination of vanadium content
KS D ISO 7530-4-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 4：Determination of copper content
KS D ISO 7530-6-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 6：Determination of manganese content
KS D ISO 7530-9-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 9：Determination of vanadium content
KS D ISO 7530-7-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 7：Determination of aluminium content
KS D ISO 7530-8-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 8：Determination of silicon content
KS D ISO 7530-2-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 2：Determination of cobalt content
KS D ISO 7530-5-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 5：Determination of iron content
KS D ISO 7530-5-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 5：Determination of iron content
KS D ISO 7530-3-2012(2022) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 3：Determination of chromium content
KS D ISO 22309:2011 Microbeam analysis-Quantitative analysis using energy-dispersive spectrometry(EDS)

Professional Standard - Petroleum, Analysis Principle of Ultraviolet Spectroscopy

SY/T 5121-1986 Infrared spectroscopic analysis method of rock organic matter and crude oil

Indonesia Standards, Analysis Principle of Ultraviolet Spectroscopy

SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers
SNI 13-4694-1998 Composition analysis of coal ash by atomic absorption spectrometry

American Society for Testing and Materials (ASTM), Analysis Principle of Ultraviolet Spectroscopy

ASTM E958-93(2005) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E169-04(2009) Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM E958-13 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E958-93(1999) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E169-04 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM E169-99 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM E169-04(2014) Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM E169-16 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM D8369-21 Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV)
ASTM D836-77 Standard test method for detailed analysis of hydrocarbons by high-resolution gas chromatography using vacuum ultraviolet absorption spectrometry (GC-VUV)
ASTM D836-84 Standard test method for detailed analysis of hydrocarbons by high-resolution gas chromatography using vacuum ultraviolet absorption spectrometry (GC-VUV)
ASTM E925-09(2022) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
ASTM G177-03(2012) Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37deg; Tilted Surface
ASTM E925-83(1994)e1 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E925-09(2014) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
ASTM E925-02 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E925-09 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E1835-14 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
ASTM G177-03 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37 Tilted Surface
ASTM G177-03e1 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37 Tilted Surface
ASTM G177-03(2008)e1 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37x00B0; Tilted Surface
ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM E2209-02(2006)e1 Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry
ASTM E1251-04 Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry
ASTM E2209-02 Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry
ASTM E2209-02(2006)e2 Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry
ASTM E1251-17a Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry
ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM E2224-22 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E2224-23 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E2224-23a Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E2994-21 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
ASTM E1835-96(2002)e1 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
ASTM E1835-96 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
ASTM E1835-96(2002) Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
ASTM E3047-22 Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry
ASTM E3047-16 Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry
ASTM E1999-18 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
ASTM E1999-23 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
ASTM G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM E2224-02 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E2224-23ae1 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
ASTM E1251-07 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry
ASTM E220-86(1996)e1 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM E2209-02(2006) Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry
ASTM E1999-11 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
ASTM B954-07 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
ASTM E1835-09 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
ASTM E2209-21 Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry
ASTM E1835-14(2022) Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
ASTM E2209-22 Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry
ASTM B954-23 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
ASTM B954-15 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
ASTM D6350-98 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
ASTM D6350-98(2003) Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
ASTM E1834-18 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
ASTM E415-21 Standard Test Method for Atomic Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
ASTM E2209-13 Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry
ASTM E2994-16 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
ASTM E1252-98 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM E1252-98(2002) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM E1252-98(2021) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM E1252-98(2013)e1 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM UOP841-83 Trans Olefins in Fatty Acids, Esters or Triglycerides by IR Spectroscopy

国家能源局, Analysis Principle of Ultraviolet Spectroscopy

SY/T 5121-2021 Infrared spectroscopic analysis method of organic matter and crude oil in rocks
SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

Japanese Industrial Standards Committee (JISC), Analysis Principle of Ultraviolet Spectroscopy

JIS H 1630:1995 Method for atomic emission spectrometric analysis of titanium
JIS H 1630:1975 Method for atomic emission spectrometric analysis of titanium
JIS H 1291:1977 Method for atomic absorption spectrochemical analysis of copper and copper alloys
JIS H 1306:1999 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys

ES-AENOR, Analysis Principle of Ultraviolet Spectroscopy

UNE 77-401-1992 Ecotoxicology. Determination of UV-VIS absorption spectra of a chemical compoud

AT-ON, Analysis Principle of Ultraviolet Spectroscopy

ONORM ISO 5666 Teil.2:1984 Water quality; determination of total mercury by flameless atomic absorption spectrometry; method after pretreatment with ultraviolett radiation

International Organization for Standardization (ISO), Analysis Principle of Ultraviolet Spectroscopy

ISO 5666-2:1983 Water quality; Determination of total mercury by flameless atomic absorption spectrometry; Part 2: Method after pretreatment with ultraviolet radiation
ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection
ISO 78-4:1983 Layouts for standards; Part 4: Standard for atomic absorption spectrometric analysis
ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
ISO 18554:2016 Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
ISO 7530-3:1990 Nickel alloys — Flame atomic absorption spectrometric analysisPart 3:Determination of chromium content
ISO/TS 13473-4:2008 Characterization of pavement texture by use of surface profiles - Part 4: Spectral analysis of surface profiles
ISO 22309:2011 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above

国家质量监督检验检疫总局, Analysis Principle of Ultraviolet Spectroscopy

SN/T 4668-2016 Qualitative Analysis of Imported and Exported Textile Fibers by UV Diffuse Reflectance Spectrometry of Natural Colored Cotton

Danish Standards Foundation, Analysis Principle of Ultraviolet Spectroscopy

DS/ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection
DS/EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
DS/EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods

Tianjin Provincial Standard of the People's Republic of China, Analysis Principle of Ultraviolet Spectroscopy

DB12/T 885-2019 Determination of Proanthocyanidins in Plant Extracts by UV/Vis Spectrophotometry

Standard Association of Australia （SAA）, Analysis Principle of Ultraviolet Spectroscopy

AS 3753:2001 Recommended practice for chemical analysis by ultraviolet/visible spectrophotometry
AS 2134.3:1994 Recommended practice for chemical analysis by atomic absorption spectrometry - Vapour generation atomic absorption spectrometry
AS 2300.1.8.2:1991 Methods of chemical and physical testing for the dairying industry - General methods and principles - Assessment of instrumental methods - Infrared spectrometric analysis of milk
AS 2134.1:1999 Recommended practice for chemical analysis by atomic absorption spectrometry - Flame atomic absorption spectrometry
AS 2134.2:1999 Recommended practice for chemical analysis by atomic absorption spectrometry - Graphite furnace spectrometry
AS/NZS 1050.20:1994 Methods for the analysis of iron and steel - Determination of magnesium content (flame atomic absorption spectrometric method)
AS 1050.23:1990 Methods for the analysis of iron and steel - Determination of molybdenum content - Flame atomic absorption spectrometric method
AS 1050.25:1986 Methods for the analysis of iron and steel - Determination of lead content (flame atomic absorption spectrometric method)
AS 1050.29:1989 Methods for the analysis of iron and steel - Determination of cobalt content - Flame atomic absorption spectrometric method
AS 1050.33:1988 Methods for the analysis of iron and steel - Determination of nickel content - Flame atomic absorption spectrometric method
AS/NZS 1050.6:1995 Methods for the analysis of iron and steel - Determination of tin content - Flame atomic absorption spectrometric method
AS/NZS 1050.38:1994 Methods for the analysis of iron and steel - Determination of vanadium content - Flame atomic absorption spectrometric method
AS/NZS 1050.37:1994 Methods for the analysis of iron and steel - Determination of copper content - Flame atomic absorption spectrometric method
AS/NZS 1050.39:1994 Methods for the analysis of iron and steel - Determination of chromium content - Flame atomic absorption spectrometric method
AS 2300.1.8:2008

Professional Standard - Forestry, Analysis Principle of Ultraviolet Spectroscopy

LY/T 2053-2012 Standard method for near infrared qualitative analysis of Wood
LY/T2053-2012 Standard method for mear infrarde qualitative analysis of wood

Professional Standard - Geology, Analysis Principle of Ultraviolet Spectroscopy

DZ/T 0064.59-2021 Methods of Analytical Groundwater Quality Part 59: Determination of Nitrate by Ultraviolet Spectrophotometry
DZ/T 0064.81-2021 Methods of Analytical Groundwater Quality Part 81: Determination of Mercury Amounts by Atomic Fluorescence Spectrometry
DZ/T 0064.11-2021 Analytical methods for groundwater quality - Part 11: Determination of arsenic content by hydride generation - atomic fluorescence spectrometry
DZ/T 0064.38-2021 Analytical methods for groundwater quality - Part 38: Determination of the amount of selenium by hydride generation - atomic fluorescence spectrometry

工业和信息化部, Analysis Principle of Ultraviolet Spectroscopy

YS/T 1171.8-2017 Methods for chemical analysis of recycled zinc raw materials Part 8: Determination of mercury content by atomic fluorescence spectrometry and cold atomic absorption spectrometry
YS/T 1332.3-2019 Methods for chemical analysis of crude copper and cobalt raw materials Part 3: Determination of sulfur content High frequency combustion-infrared spectroscopy
YS/T 1171.7-2017 Methods for chemical analysis of recycled zinc raw materials Part 7: Determination of arsenic and antimony amounts Atomic fluorescence spectrometry
YS/T 445.10-2019 Methods of chemical analysis of silver concentrates Part 10: Determination of antimony content Hydride generation-atomic fluorescence spectrometry and flame atomic absorption spectrometry
YS/T 3015.6-2017 Methods for chemical analysis of gold-loaded carbon Part 6: Determination of mercury content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
YS/T 3015.7-2017 Methods for chemical analysis of gold-loaded carbon Part 7: Determination of arsenic content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
YS/T 1381-2020 Methods for chemical analysis of rhodium compounds - Determination of arsenic content Atomic fluorescence spectrometry
YS/T 1341.7-2019 Methods of chemical analysis of crude zinc Part 7: Determination of antimony content Atomic fluorescence spectrometry
YS/T 1341.8-2019 Methods of chemical analysis of crude zinc Part 8: Determination of tin content Atomic fluorescence spectrometry
YS/T 1341.6-2019 Methods of chemical analysis of crude zinc Part 6: Determination of arsenic content by atomic fluorescence spectrometry
YS/T 1171.9-2017 Methods for chemical analysis of recycled zinc raw materials Part 9: Determination of cadmium amount Atomic absorption spectrometry
YS/T 445.13-2019 Methods of chemical analysis of silver concentrates Part 13: Determination of mercury content by atomic fluorescence spectrometry
YS/T 445.11-2019 Methods for chemical analysis of silver concentrates Part 11: Determination of bismuth content Hydride generation-atomic fluorescence spectrometry, flame atomic absorption spectrometry and Na2EDTA titration
YS/T 990.17-2015 Methods for chemical analysis of matte Part 17: Determination of cobalt content Atomic absorption spectrometry
YS/T 1115.3-2016 Methods for chemical analysis of copper ores and tailings Part 3: Determination of zinc content Flame atomic absorption spectrometry
YS/T 1115.4-2016 Methods for chemical analysis of copper ores and tailings Part 4: Determination of nickel content Flame atomic absorption spectrometry
YS/T 1115.1-2016 Methods for chemical analysis of copper ores and tailings Part 1: Determination of copper content Flame atomic absorption spectrometry
YS/T 1115.5-2016 Methods for chemical analysis of copper ores and tailings Part 5: Determination of cobalt content Flame atomic absorption spectrometry
YS/T 1115.2-2016 Methods for chemical analysis of copper ores and tailings Part 2: Determination of lead content Flame atomic absorption spectrometry
YS/T 1115.8-2016 Methods for chemical analysis of copper ores and tailings Part 8: Determination of magnesium content Flame atomic absorption spectrometry
YS/T 1115.6-2016 Methods for chemical analysis of copper ores and tailings Part 6: Determination of cadmium content Flame atomic absorption spectrometry
YS/T 1115.7-2016 Methods for chemical analysis of copper ores and tailings Part 7: Determination of manganese content Flame atomic absorption spectrometry
YS/T 1171.12-2021 Methods for chemical analysis of recycled zinc raw materials Part 12: Determination of indium content by flame atomic absorption spectrometry

Group Standards of the People's Republic of China, Analysis Principle of Ultraviolet Spectroscopy

T/QAS 082.3-2022 Chemical Analysis of Rock Salt and Glauber's Salt Part 3: Determination of Nitrate by Ultraviolet Spectrophotometry
T/QAS 082.10-2023 Chemical Analysis of Rock Salt and Glauber's Salt - Part 10: Determination of Arsenic by Atomic Fluorescence Spectrometry
T/QAS 081.5-2023 Chemical analysis of polymetallic minerals - Part 5: Determination of gold by foam adsorption - atomic absorption spectrometry
T/QAS 081.4-2023 Chemical analysis of polymetallic minerals - Part 4: Determination of tin by hydride generation - atomic fluorescence spectrometry
T/CPCIF 0187-2022 Rapid analysis method of diesel engines NOx reduction agent- aqueous urea solution（AUS 32)—Near infrared spectrometry

European Committee for Standardization (CEN), Analysis Principle of Ultraviolet Spectroscopy

prEN 25666-2-1992 Water quality; determination of total mercury by flameless atomic absorption spectrometry; part 2: method after pretreatment with ultraviolet radiation (ISO 5666-2:1983)
EN ISO 11151-1:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000
EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
prEN 10201-1988 Chemical analysis of ferrous materials; determination of silicon in steel and iron; flame atomic absoption spectrometric method
EN 16344:2013 Cosmetics - Analysis of cosmetic products - Screening for UV-filters in cosmetic products and quantitative determination of 10 UV-filters by HPLC
DD ENV 955-4-1997 Chemical Analysis of Refactory Products - Part 4: Products Containing Silica and/or Alumina (Analysis by Flame Atomic Absorption Spectrometry (FAAS) and Inductively Coupled Plasma Atomic Emission Spectrography (ICP))
EN ISO 10700:1995 Steel and Iron - Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method (ISO 10700 : 1994)

未注明发布机构, Analysis Principle of Ultraviolet Spectroscopy

BS 684-1.15:1990(1999)*ISO 4656:1989 Methods of analysis of Fats and fatty oils — Part 1 : Physical methods — Section 1.15 Determination of ultraviolet absorbance
BS EN ISO 26845:2008(2009) Chemical analysis of refractories — General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP - AES) methods

BE-NBN, Analysis Principle of Ultraviolet Spectroscopy

NBN T 01-104-1984 Layouts. for standards - Standard for atomic absorption-spectrometric analysis.

Professional Standard - Non-ferrous Metal, Analysis Principle of Ultraviolet Spectroscopy

YS/T 536.7-2009 Methods for chemical analysis of bismuth.Determination of arsenic content.Atomic fluorescence spectrometric method
YS/T 536.11-2009 Methods for chemical analysis of bismuth.Determination of mercury content.Atomic fluorescence spectrometric method
YS/T 536.4-2009 Methods for chemical analysis of bismuth.Determination of silver content.Flame atomic absorption spectrophotmetric method and electrothermal atomic absorption spectrometric method
YS/T 555.4-2009 Methods for chemical analysis of molybdenum concentrate.Determination of tin content.Atomic fluorescence spectrometry
YS/T 1605.3-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 3: Determination of bismuth content— Flame atomic absorption spectrometry and atomic fluorescence spectrometry
YS/T 872-2013 Methods for chemical analysis gallium.Determination of mercury in industrial gallium.Atomic fluorescence spectrometer method
YS/T 555.3-2009 Methods for chemical analysis of molybdenum concentrate.Determination of arsenic conten.Atomic fluorescence spectrometry
YS/T 710.4-2009 Method for chemical analysis of cobalt oxide.Part 4:Determination of arsenic content.Atomic fluorescence spectrometry
YS/T 556.7-2009 Methods for chemical analysis of antimony concentrates.Part 7:Determination of mercury content.Atomic fluorescence spectrometry
YS/T 229.2-2013 Methods for chemical analysis of high pure lead.Part 2:Determination of arsenic content.Atomic fluorescence spectrometry
YS/T 229.3-2013 Methods for chemical analysis of high pure lead.Part 3:Determination of antimony content.Atomic fluorescence spectrometry
YS/T 276.8-2011 Methods for chemical analysis of indium.Part 8:Determination of bismuth content.Method 1:Hydride generation-atomic fluorescence spectrometry.Method 2:Flame atomic absorption spectrometry
YS/T 536.2-2009 Methods for chemical analysis of bismuth.Determination of iron content.Electrothermal atomic absorption spectrometric method
YS/T 536.6-2009 Methods for chemical analysis of bismuth.Determination of lead content.Electrothermal atomic absorption spectrometric method
YS/T 536.12-2009 Methods for chemical analysis of bismuth.Determination of nickel content.Electrothermal atomic absorption spectrometric method
YS/T 536.13-2009 Methods for chemical analysis of bismuth.Determination of cadmium content.Electrothermal atomic absorption spectrometric method
YS/T 461.6-2003 The methods for chemical analysis of lead and zinc bulk concentrates-The determination of mercury content-The atomic fluorescence spectrometry method
YS/T 276.5-2011 Methods for chemical analysis of indium.Part 5:Determination of iron content.Method 1:Graphite furnace atomic absorption spectrometry.Method 2:Flame atomic absorption spectrometry
YS/T 248.3-2007 Methods for chemical analysis of crude lead.Determination of antimony content.Flame atomic absorption spectrometric method
YS/T 248.5-2007 Methods for chemical analysis of crude lead.Determination of copper content.Flame atomic absorption spectrometric method
YS/T 248.7-2007 Methods for chemical analysis of crude lead.Determination of silver content.Flame atomic 'absorption spectrometric method
YS/T 248.8-2007 Methods for chemical analysis of crude lead.Determination of zinc content.Flame atomic absorption spectrometric method
YS/T 248.9-2007 Methods for chemical analysis of crude lead.Determination of bismuth content.Flame atomic absorption spectrometric method
YS/T 248.10-2007 Methods for chemical analysis of crude lead.Determination of iron content.Flame atomic absorption spectrometric method
YS/T 226.1-2009 Methods for chemical analysis of selenium.Part 1:Determination of bismuth content.Hydride generation-atomic fluorescence spectrometry
YS/T 226.2-2009 Methods for chemical analysis of selenium.Part 2:Determination of antimony content-Hydride generation-atomic fluorescence spectrometry
YS/T 74.1-2010 Methods for chemical analysis of cadmium- Part 1: Determination of arsenic content- Hydride generation-atomic fluorescence spectrometry
YS/T 74.2-2010 Methods for chemical analysis of cadmium- Part 2: Determination of antimony content- Hydride generation-atomic fluorescence spectrometry
YS/T 227.1-2010 Methods for chemical analysis of tellurium-Part 1: Determination of bismuth content-Hydride generation-atomic fluorescence spectrometry
YS/T 227.10-2010 Methods for chemical analysis of tellurium-Part 10: Determination of arsenic content- Hydride generation-atomic fluorescence spectrometry
YS/T 74.9-2010 Mehtods for chemical analysis of cadmium- Part 9:Determination of tin content- Hydride generation-atomic fluorescence spectrometry
YS/T 461.6-2013 Methods for chemical analysis of lead and zinc bulk concentrates.Part 6:The determination of mercury content.Atomic fluorescence spectrometry
YS/T 276.1-2011 Methods for chemical analysis of indium.Part 1:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry
YS/T 1605.5-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 5: Determination of antimony content— Atomic fluorescence spectrometry
YS/T 1605.4-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 4: Determination of tin content— Atomic fluorescence spectrometry
YS/T 990.4-2014 Methods for chemical analysis of copper matte.Part 4:Determination of bismuth content.Atomic absorption spectrometry
YS/T 990.7-2014 Methods for chemical analysis of copper matte.Part 7:Determination of cadmium content.Atomic absorption spectrometry
YS/T 990.11-2014 Methods for chemical analysis of copper matte.Part 11:Determination of nickel content.Atomic absorption spectrmetry
YS/T 990.15-2014 Methods for chemical analysis of copper matte.Part 15:Determination of antimony content.Atomic absorption spectrometry
YS/T 520.10-2007 Chemical analysis of gallium.Part 10:Determination of zinc content.The atomic absorption spectral method
YS/T 341.2-2006 Methods for chemical analysis of nickel concentrates-Determination of copper content-Flame atomic absorption spectrometric method
YS/T 252.3-2007 Methods for chemical analysis of nickel matte.Determination of cobalt content.Flame atomic absorption spectrometric method
YS/T 240.11-2007 Methods for chemical analysis of bismuth concentrate.Determination of silver content.Flame atomic absorption spectrometric method
YS/T 990.16-2014 Methods for chemical analysis of copper matte.Part 16:Determination of mercury content.Cold atomic absorption spectrometry
YS/T 520.11-2007 Chemical analysis of gallium.Part 11:Determination of zinc content.The cold vapor atomic absorption spectral method
YS/T 226.7-2009 Methods for chemical analysis of selenium.Part 7:Determination of magnesium content.Flame atomic absorption spectrometry
YS/T 226.8-2009 Methods for chemical analysis of selenium.Part 8:Determination of copper content.Flame atomic absorption spectrometry
YS/T 226.9-2009 Methods for chemical analysis of selenium.Part 9:Determination of iron content.Flame atomic absorption spectrometry
YS/T 226.10-2009 Methods for chemical analysis of selenium.Part 10:Determination of nickel content.Flame atomic absorption spectrometry
YS/T 226.11-2009 Methods for chemical analysis of selenium.Part 11:Determination of lead content.Flame atomic absorption spectrometry
YS/T 74.3-2010 Methods for chemical analysis of cadmium- Part 3: Determination of nickel content- Electrothermal atomic absorption spectrometric method
YS/T 74.4-2010 Methods for chemical analysis of cadmium- Part 4: Determination of lead content- Flame atomic absorption spectrometry
YS/T 227.3-2010 Methods for chemical analysis of bismuth-Part 3: Determination of lead content-Flame atomic absorption spectrometry
YS/T 74.6-2010 Mehtods for chemical analysis of cadmium- Part 6:Determination of zinc content- Flame atomic absorption spectrometry
YS/T 74.10-2010 Mehtods for chemical analysis of cadmium- Part 10:Determination of silver content- Flame atomic absorption spectrometry
YS/T 276.7-2011 Methods for chemical analysis of indium.Part 7:Determination of lead content.Flame atomic absorption spectrometry
YS/T 281.10-2011 Methods for chemical analysis of cobalt.Part 10:Determination of nickel content.Flame atomic absorption spectrometry
YS/T 281.18-2011 Methods for chemical analysis of cobalt.Part 18:Determination of sodium content.Flame atomic absorption spectrometry
YS/T 281.6-2011 Methods for chemical analysis of cobalt.Part 6:Determination of magnesium content.Flame atomic absorption spectrometry
YS/T 281.7-2011 Methods for chemical analysis of cobalt.Part 7:Determination of zinc content.Flame atomic absorption spectrometry
YS/T 281.8-2011 Methods for chemical analysis of cobalt.Part 8:Determination of cadmium content.Flame atomic absorption spectrometry
YS/T 281.9-2011 Methods for chemical analysis of cobalt.Part 9:Determination of lead content.Flame atomic absorption spectrometry
YS/T 227.3-010

Professional Standard - Agriculture, Analysis Principle of Ultraviolet Spectroscopy

水产品质量安全检验手册 1.2.4.4-2005 Chapter 1 General Introduction Section 2 Analytical Methods for Aquatic Product Inspection 4. Physicochemical Analysis (4) Atomic Fluorescence Spectrometry

PL-PKN, Analysis Principle of Ultraviolet Spectroscopy

PN H04155-09-1986 Chemical analysis of silica raw materials and refractory products Method spectrographic
PN EN 24943-1992 Chemical analysis of ferrous metal. Determination of copper content. Flame atomic absorption spectrometric method

ES-UNE, Analysis Principle of Ultraviolet Spectroscopy

UNE-EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
UNE-CEN/TS 17784-1:2022 Organo-mineral fertilizers - Identification of complexing agents - Part 1: Method using UV-Vis spectrophotometry and gravimetry (Endorsed by Asociación Española de Normalización in May of 2022.)

CZ-CSN, Analysis Principle of Ultraviolet Spectroscopy

CSN 42 0615 Cast.2-1974 Chemical analysis of brazing alloys Determination of siliver by AAS
CSN 42 0636 Cast.2-1975 Chemical analysis of hard lead. Determination of silver by AAS
CSN 42 0615 Cast.14-1974 Chemical analysis of brazing alloys. Determination of antimony by AAS
CSN 42 0615 Cast.13-1974 Chemical analysis of brazing alloys. Determination of lead by AAS
CSN 42 0615 Cast.7-1974 Chemical analysis of brazing alloys. Determination of iron by AAS
CSN 42 0636 Cast.12-1975 Chemical analysis of hard lead. Determination of zinc by AAS
CSN 42 0648 Cast.4-1986 Chemical analysis of metallic chromium. Determination of iron by the photometric and the atomic absorption method methods
CSN 42 0616 Cast.19-1975 Chemical analysis of silver brazing alloys. Determination of antimony by AA?
CSN 42 0616 Cast.15-1975 Chemical analysis of silver brazing alloys. Determination of iron by AAS.
CSN 70 0639 Cast.2-1976 Glass testing. Chemical analysis of glass. Determination of magnesium oxide. Atomic absorption spectrometry
CSN 42 0616 Cast.9-1974 Chemical analysis of silver solders. Determination of nickel by AAS
CSN 42 0616 Cast.12-1974 Chemical analysis of silver solders Determination of lead by AAS
CSN 42 0616 Cast.13-1974 Chemical analysis of silver solders. Determination of zinc by AAS
CSN 42 0616 Cast.17-1975 Chemical analysis of silver brazing alloys. Determination of manganese by AAS
CSN 70 0638 Cast.2-1990 Glass testing methods. Chemical analysis of glass. Determination of calcium oxide by atomic absorption spectometry
CSN 42 0614 Cast.10-1974 Chemical analysis of tin-lead solders. Determination of zinc by atomic absorption spectrometry
CSN 70 0632 Cast.3-1986 Glass testing methods. Chemical analysis of glass. Determination of lead oxide by atomic absorption spectrometry
CSN 42 0614 Cast.5-1974 Chemical analysis of tin-lead solders. Determination of copper by atomic absorption spectrometry
CSN 42 0614 Cast.7-1974 Chemical analysis of tin-lead solders. Determination of iron by atomic absorption spectrometry
CSN 70 0631 Cast.3-1986 Glass testing methods. Chemical analysis of glass. Determination of zinc oxide by atomic absorption spectrometry
CSN 42 0648 Cast.6-1986 Chemical analysis of metallic chromium. Determination of copper by the photometric and the atomic absorption method methods
CSN 72 2041-21-1992
CSN 42 0613 Cast.11-1974 Chemical analysis of bearing lead and calcium metala. Determination of iron by atomic absorption
CSN 42 0648 Cast.10-1986 Chemical analysis of metallic chromium. Determination of aluminum by titration and atomic absorption method

Professional Standard - Energy, Analysis Principle of Ultraviolet Spectroscopy

NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

Professional Standard - Aviation, Analysis Principle of Ultraviolet Spectroscopy

HB 6731.1-1993 Determination of Copper Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.9-1993 Determination of Chromium Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.2-1993 Determination of Magnesium Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.4-1993 Determination of Lead Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.5-1993 Determination of Cadmium Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.6-1993 Determination of Iron Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.7-1993 Determination of Manganese Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.8-1993 Determination of Nickel Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.10-1993 Determination of Vanadium Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.3-1993 Determination of Zinc Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB/Z 5088.6-1999 Analytical method of electroplating nickel solution Determination of copper content by atomic absorption spectrometry
HB/Z 5091.5-1999 Analysis method for chrome plating solution Determination of ferrous content through atomic absorption spectrometry
HB/Z 5091.6-1999 Analysis method for chrome plating solution Determination of copper content through atomic absorption spectrometry
HB/Z 5088.5-1999 Analysis method for nickel plating solution Determination of ferrous content through atomic absorption spectrometry

Lithuanian Standards Office , Analysis Principle of Ultraviolet Spectroscopy

LST EN ISO 11151-1:2002 Laser and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2000)
LST EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008)

British Standards Institution (BSI), Analysis Principle of Ultraviolet Spectroscopy

BS EN ISO 26845:2009 Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
BS EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
PD CEN/TS 17784-1:2022 Organo-mineral fertilizers. Identification of complexing agents.. Method using UV-Vis spectrophotometry and gravimetry
BS EN ISO 10700:1995 Steel and iron - Determination of manganese content - Flame atomic absorption spectrometric method
BS ISO 20552:2007 Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
DD ENV 13800-2000 Lead and lead alloys. Analysis by flame atomic absorption spectromerty (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
BS 7709-5:1993 Analysis of extract solutions of glass. Method for determination of iron (III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry
BS ISO 18554:2016 Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
DD ISO/TS 13473-4:2008 Characterization of pavement texture by use of surface profiles. Spectral analysis of texture profiles
BS DD ENV 13800:2000 Lead and lead alloys - Analysis by flame atomic absorption spectromerty (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
BS ISO 7530-1:2015 Nickel alloys. Flame atomic absorption spectrometric analysis. Determination of cobalt, chromium, copper, iron and manganese
BS 7455-7:1992 Analysis of nickel alloys by flame atomic absorption spectrometry. Method for determination of aluminium
BS 7455-9:1994 Analysis of nickel alloys by flame atomic absorption spectrometry. Method for determination of vanadium
BS 7020-11.2:1993 Analysis of iron ores. Methods for the determination of vanadium content. Flame atomic absorption spectrometric method
BS 7455-8:1992 Analysis of nickel alloys by flame atomic absorption spectrometry. Method for determination of silicon
BS EN 15948:2020 Cereals. Determination of moisture and protein. Method using Near-Infrared Spectroscopy in whole kernels
BS EN 16344:2013 Cosmetics. Analysis of cosmetic products. Screening for UV-filters in cosmetic products and quantitative determination of 10 UV-filters by HPLC
BS PD CEN/TR 10362:2014 Chemical analysis of ferrous materials. Determination of selenium in steels. Electrothermal atomic absorption spectrometric method
DD 220-1994 Soil quality. Determination of mineral oil content. Method by infrared spectrometry and gas chromatographic method

NL-NEN, Analysis Principle of Ultraviolet Spectroscopy

NEN 6302-1980 Test methods for vegetable and animal oils and fats - Preparation of methyl esters for gaschromatography and infrared spectrophotometry
NEN 6228-1985 Chemical analysis of iron and steel - Determination of the tin content in iron and steel by atomic absorption spectrometry
NEN 6214-1978 Chemical analysis of iron and steel - Determination of the magnesium content in iron by atomic absorption spectrometry
NEN 6214-1984 Chemical analysis of iron and steel - Determination of the magnesium content in iron by atomic absorption spectrometry
NEN 6227-1983 Chemical analysis of iron and steel Determination of the copper content in iron and steel by atomic absorption spectrometry

IN-BIS, Analysis Principle of Ultraviolet Spectroscopy

IS 6010-1971

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Analysis Principle of Ultraviolet Spectroscopy

GB/T 1819.17-2017 Methods for chemical analysis of tin concentrates—Part 17：Determination of mercury content—Atomic fluorescence spectrometric method

Professional Standard - Railway, Analysis Principle of Ultraviolet Spectroscopy

TB/T 2544.2-1995 Quick Analysis Method for Corrosion Inhibitor in Cooling Water of Railway Diesel Locomotive Determination of Nitrite Ultraviolet Spectrophotometry
TB/T 2544.3-1995 Quick Analysis Method for Corrosion Inhibitor in Cooling Water of Railway Diesel Locomotive Determination of Benzotriazole by UV Spectrophotometry

KR-KS, Analysis Principle of Ultraviolet Spectroscopy

KS I ISO 20552-2021 Workplace air — Determination of mercury vapour —Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry

RU-GOST R, Analysis Principle of Ultraviolet Spectroscopy

GOST 31870-2012 Drinking water. Determination of elements content by atomic spectrometry methods
GOST R ISO 20552-2011 Workplace air. Determination of mercury vapour. Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
GOST R ISO 7530-2-2016 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 2. Determination of cobalt content
GOST R ISO 7530-3-2016 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 3. Determination of chromium content
GOST R ISO 7530-9-2017 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 9. Determination of vanadium content
GOST R 59422.1-2021 Optics and photonics. Lasers and laser-related equipment. Standard optical elements. Part 1. Standard optical elements for laser equipment operating in the ultraviolet, visible and near-infrared spectral ranges. General technical requirements

Professional Standard - Electron, Analysis Principle of Ultraviolet Spectroscopy

SJ/Z 3206.5-1989 Treatment methods for sensitized plate and film photograph for chemical analysis using spectrum

YU-JUS, Analysis Principle of Ultraviolet Spectroscopy

JUS C.A1.237-1990 Methods for chemical analysis of cadmium. Determination of silver content. Flame atomic absorption spectrometric method
JUS C.A1.235-1990 Metbods for cbemical aualysis of cadmium. Determination of copper content. Flame atomic absorption svectrometric metbo?
JUS C.A1.236-1990 Hethods for chemical saalysis of cadmium. Determination of lead content. Fla?e atomic absorption spectrometric method
JUS C.A1.238-1990 Metha?s for chemical analysis of cadmium. Determination of zine content. Flame atomic absorption spectroinetric method
JUS C.A1.263-1981 Methods for chemical analysis of aluminium and aluminium alloys. Determination of zine content b\ atomic absorption spectrophotometry
JUS C.A1.363-1982 Methods for chemical analysis of zinc and zinc alloys. Determination of cadmium by atomic absorpti-on spectrophotometry
JUS C.A1.362-1982 Methods for chemical analysis of zinc and zinc alloys. Determination of lead by atomic absorption spec-trophotometry
JUS C.A1.364-1982 Methods for chemical analysis of zinc and zinc alloys. Determination of copper by atomic absorption spec troph o tometry
JUS C.A1.622-1985 Method for chemical analysis of copper and copper alloys. Determination of chromivm by atomic absorption spectrophotometry
JUS C.A1.264-1978 Methods for chemical analysis oj alummtum and ahtmintum alloys. Determination ofcopper by atomic absorption

NO-SN, Analysis Principle of Ultraviolet Spectroscopy

NS 4775-1994 Water analysis. Atomic absorption spectrometry, atomization in flame. Special guidelines for sodium and potassium
NS 4776-1994 Water analysis. Atomic absorption spectrometry, atomization in flame. Special guidelines for calcium and magnesium
NS 4783-1988 Water analysis - Metal content of biological material determined by atomic absorption spectrometry

RO-ASRO, Analysis Principle of Ultraviolet Spectroscopy

STAS SR ISO 7530-2:1995 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 2: Determination of cobalt content
STAS SR ISO 7530-3:1995 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 3: Determination of chromium content
STAS SR 13313-1995 Chemical analysis of ferrous materials. Recommendation for the drafting of standard methods of analysis employing flame atomic absorption spectrometry for the chemical analysis of iron and steel
STAS SR EN 24943-1994 Chemical analysis of ferrous metal. Determination of copper content. Flame atomic absorption spectrometric method

PT-IPQ, Analysis Principle of Ultraviolet Spectroscopy

NP EN 12373-8-2001 Aluminium and aluminium alloys Anodizing Part 8:Determination of the comparative fastness to ultra-voilet light and heat of coloured anodic oxidation coatings

Yunnan Provincial Standard of the People's Republic of China, Analysis Principle of Ultraviolet Spectroscopy

DB53/T 639.6-2014 Methods for chemical analysis of direct reduced iron - Part 6: Determination of multiple elements by flame atomic absorption spectrometry
DB53/T 639.7-2014 Methods for chemical analysis of direct reduced iron - Part 7: Determination of multiple elements by X-ray fluorescence spectrometry

Professional Standard - Commodity Inspection, Analysis Principle of Ultraviolet Spectroscopy

SN/T 2297.7-2015 Analysis method for gypsum and gysum products.Part 7:Determination of arsenic and mercury content.Atomic fluorescence spectrum

SE-SIS, Analysis Principle of Ultraviolet Spectroscopy

SIS SS-EN 24 943-1991 Chemical analysis of ferrous metal — Deter- mination of copper content — Flame atomic absorption spectrometric method

Anhui Provincial Standard of the People's Republic of China, Analysis Principle of Ultraviolet Spectroscopy

DB34/T 2879-2017 Methods for chemical analysis of copper slag tailings - Determination of copper content - Atomic absorption spectrometry