ZH
RU
ES
How to measure elastic modulus
How to measure elastic modulus, Total:352 items.
In the international standard classification, How to measure elastic modulus involves: Mechanical testing, Continuous handling equipment, Wood, sawlogs and sawn timber, Plastics, Wood-based panels, Conducting materials, Iron and steel products, Wood technology processes, Insulating fluids, Testing of metals, Construction materials, Rubber, Ceramics, Analytical chemistry, Non-destructive testing, Cellular materials, Powder metallurgy, Mining and quarrying, Technical drawings, Civil engineering in general, Non-ferrous metals, Textile fibres, Paper and board, Waxes, bituminous materials and other petroleum products, Fuels, Road vehicles in general, Reinforced plastics, Materials for the reinforcement of composites, Glass, Refractories, Road engineering, Inorganic chemicals, Hydraulic fluids, Soil quality. Pedology, Paints and varnishes, Raw materials for rubber and plastics, Structures of buildings, Insulating materials, Metrology and measurement in general, Fibre optic communications.
Indonesia Standards, How to measure elastic modulus
SE-SIS, How to measure elastic modulus
- SIS 20 03 11
- SIS SS 13 72 32-1983 Concrete testing - Hardened concrete - Modulus of elasticity in ompression
- SIS SS 13 73 09-1982 Autoclaved aerated concrete - Determination of modulus of elasticity at compression
- SIS SS 11 21 39-1987 Aliuminium and steel - Stranded con- uctors for overhead lines - Tensile esting for the determination of the odulus of elasticity
International Organization for Standardization (ISO), How to measure elastic modulus
- ISO 9856:1989 Conveyor belts; determination of elastic modulus
- ISO 3349:1975 Wood; Determination of modulus of elasticity in static bending
- ISO 12076:2002 Steel wire ropes - Determination of the actual modulus of elasticity
- ISO 6784:1982 Concrete; Determination of static modulus of elasticity in compression
- ISO 21181:2005 Light conveyor belts - Determination of the relaxed elastic modulus
- ISO/TR 4137:1978 Plastics; Determination of modulus of elasticity by alternating flexure
- ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
- ISO 9856:2003 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- ISO 6073:1980 Hydraulic fluid power; Petroleum fluids; Prediction of bulk moduli
- ISO 16978:2003 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
- ISO 3312:1987 Sintered metal materials and hardmetals; Determination of Young modulus
- ISO 11093-7:2011 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method
- ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- ISO 21713:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method
- ISO 20343:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus of thick ceramic coatings at elevated temperature
- ISO 13061-4:2014 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 4: Determination of modulus of elasticity in static bending
- ISO 19603:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of thick ceramic coatings
- ISO 13061-4:2014/Amd 1:2017 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 4: Determination of modulus of elasticity in static bending — Amendment 1
- ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of ceramic tube and rings
CZ-CSN, How to measure elastic modulus
- CSN 73 1360-1976 Determination of modulus of elasticity of cellular concrete
- CSN 49 0116-1976 Sawn timbor Testing ní' iikkIuIus of elasticity in bending
- CSN 49 0116-1980 Wood. Determination of the modulus of elasticity in static bending
- CSN 73 1319-1968 Determination of modulus o? elasticity and deformability of concrete
- CSN 79 3819-1977 ting of leatliers. Apparent modulus iíiision elasticity, tensilc stiffncss I agreement modulus of leathers
- CSN ISO 6784:1993 Concrete-Determination of static modulus of elasticity in compression
- CSN 73 6174-1994
- CSN 49 0131-1982 Sawn timber. Determination of modulus of elasticity in static bending
- CSN 34 6311-1984 Testing of ceramic elektrolochtiic mulo rials. Methods of determination of tin; elasticity modulus
- CSN 72 5021-1973 Testing of fired ceramic materials. Determination of the modullus of elasticity in tension
- CSN 64 0614-1981 Testing of plnstios. Determination f modulus of elasticity from tensile, ompresion and flexural tests
TR-TSE, How to measure elastic modulus
- TS 2478-1976 WOOD - DETERMINATION OF MODULUS OF ELASTICITY IN STATIC BENDING
- TS 3502-1981 TEST METHOD FOR STATIC MODULUS OF ELASTICITY AND POISSON'S RATIC OF CONCRETE IN COMPRESSION
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to measure elastic modulus
- GB/T 14694-1993 Plastics. Determination of compressive elastic modulus
- GB/T 1936.2-1991 Method for determination of the modulus of elasticity in static bending of wood
- GB/T 3074.2-2008 Method for the determination of the elastic modulus of graphite electrodes
- GB/T 1936.2-2009 Method for determination of the modulus of elasticity in static bending of wood
- GB/T 3074.2-1982 Method for determination of the elastic modulus of graphite electrodes
- GB/T 24191-2009 Steel wire ropes.Determination of the actual modulus of elasticity
- GB/T 1943-2009 Method for determination of the modulus of elasticity in compression perpendicular to grain of wood
- GB/T 15777-1995 Method for determination of the modulus of elasticity in compressive parallel to grain of wood
- GB/T 1943-1991 Method for determination of the modulus of elasticity in compression perpendicular to grain of wood
- GB/T 14453-1993 Metallic materials. Standard test method for the elastic modulus at high temperature. The method of disc. Vibrator
- GB/T 43112-2023 Rate jump method for measuring elastic modulus of metallic materials
- GB/T 5166-1998 Sintered metal materials and hardmetals--Determination of Young's modulus
- GB/T 22906.7-2008 Testing of cores.Part 7:Determination of flexural modulus by the three-point method
- GB/T 15902-2009 Conveyor belts-Determination of elastic and permanent elongation and calculation of elastic modulus
- GB/T 5166-2023 Determination of elastic modulus of sintered metal materials and cemented carbide
- GB/T 11718.8-1989 Medium density fiberboard--Determination of static bending strength and elastic modulus
- GB/T 43013-2023 Determination of dynamic elastic modulus of chemical fibers by acoustic pulse propagation method
- GB/T 29895-2013 Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration
- GB/T 22906.8-2008 Testing of cores.Part 8:Determination of natural frequency and flexural modulus by experimental modal analysis
- GB/T 28990-2012 Code for non-destructive evaluation of interior decay and modulus of elasticity of historic building wood members by stress wave methods
- GB 5594.2-1985 Test method for performance of structural ceramic materials for electronic components Test method for Young's modulus of elasticity and Poisson's ratio
- GB/T 5594.2-1985 Test methods for properties of structure ceramic used in electronic components--Test method for Young's elastic modulus and Poisson ratio
- GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- GB/T 1927.13-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 13:Determination of the modulus of elasticity in compression perpendicular to grain
Association Francaise de Normalisation, How to measure elastic modulus
- NF ISO 12076:2008 Câbles en acier - Détermination du module effectif d'élasticité
- NF A47-207*NF ISO 12076:2008 Steel wire ropes - Determination of the actual modulus of elasticity
- NF A95-336*NF EN 23312:1993 Sintered metal materials and hardmetals. Determination of young modulus.
- NF T47-154*NF EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
- NF EN ISO 21181:2013 Courroies transporteuses légères - Détermination du module d'élasticité relaxé
- NF T47-111:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus.
- NF T47-111*NF EN ISO 9856:2017 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- NF B10-638*NF EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
- NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
- NF EN 14580:2005 Méthodes d'essai des pierres naturelles - Détermination du module d'élasticité statique
- NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
- FD T66-065:2018 Bitumen and bituminous binders - Determination of the complex modulus - Elasticimeter
- NF EN ISO 9856:2017 Courroies transporteuses - Détermination de l'allongement élastique et rémanent et calcul du module d'élasticité
- NF T47-111/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus - Amendment 1.
- NF B10-631*NF EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
- NF EN 14146:2004 Méthodes d'essai pour pierres naturelles - Détermination du module d'élasticité dynamique (par la mesure de la fréquence de résonance fondamentale)
- NF P18-430-13:2014 Testing hardened concrete - Part 13 : determination of secant modulus of elasticity in compression
- NF P18-430-13*NF EN 12390-13:2021 Testing hardened concrete - Part 13 : determination of secant modulus of elasticity in compression
- NF EN 12390-13:2021 Essais pour béton durci - Partie 13 : détermination du module sécant d'élasticité en compression
- NF B51-123:1987 Wood based panels. Determination of modulus of elasticity in tension and of tensile strength parallel to faces.
- NF B41-210-5*NF EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5 : determination of elastic moduli at elevated temperatures
- NF EN 820-5:2009 Céramiques techniques avancées - Propriétés thermomécaniques des céramiques monolithiques - Partie 5 : détermination des modules élastiques à températures élevées
- NF EN 13286-43:2003 Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 43 : méthode d'essai pour la détermination du module d'élasticité des mélanges traités aux liants hydrauliques
- NF EN 13412:2006 Produits et systèmes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination du module d'élasticité en compression
- NF P18-938*NF EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression.
- NF EN 1352:1997 Détermination du module d'élasticité statique en compression du béton cellulaire autoclavé et du béton de granulats légers à structure ouverte
- NF B51-016:1987 Wood. Static bending. Determination of modulus of elasticity in static bending using small clear specimens.
- NF B51-018:1988 Wood. Tensile parallel to grain. Determination of modulus of elasticity in tensile parallel to grain using small clear specimens.
- NF C93-903-42*NF EN 61300-3-42:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-42 : Examinations and measurements - Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves
RO-ASRO, How to measure elastic modulus
- STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- STAS 7168-1971 PLYWOOD Determination of the strength and moduls of elasticity bending
- STAS 9994-1975 WOOD Determination of modulus of elasticity by the dynamic method
- STAS 10574-1976 WOOD Detorminalion of the modulus of elasticity in shear by the dynamic method
- STAS 5855-1990 CHIPBOARDS AND WOOD FIBREBOARDS Strength and elasticity modulus deter- minatiou at slalic bending
(U.S.) Ford Automotive Standards, How to measure elastic modulus
Korean Agency for Technology and Standards (KATS), How to measure elastic modulus
- KS D ISO 12076-2006(2011) Steel wire ropes－Determination of the actual modulus of elasticity
- KS D ISO 12076:2006 Steel wire ropes-Determination of the actual modulus of elasticity
- KS D ISO 12076:2013 Steel wire ropes－Determination of the actual modulus of elasticity
- KS L 1598-1994 Testing methods for elastic modulus of high performance ceramics at elevated temperature
- KS F 2437-2013 Standard test method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
- KS F 2437-2008 Testing method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
- KS F 2437-1982 Testing method for dynamic modulus of elasticity, rigidity and dynamic Poisson’s ratio of concrete specimens by resonance vibration
- KS F 2438-2002 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS F 2438-1982 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS F 2376-2014 Standard test method for determining the resilient modulus of asphalt mixtures using indirect tensile mode
- KS M ISO 6073:2003 Petroleum products-Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
- KS F 2438-2017 Testing method for static modulus of elasticity and Poission′s ratio in compression of cylindrical concrete specimens
- KS M ISO 6073:2013 Petroleum products－Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
- KS F 2437-2019 Standard test method for dynamic modulus of elasticity, dynamic modulus of rigidity and dynamic Poisson’s ratio of concrete specimens by forced resonance apparatus
- KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
- KS M ISO 1209-2-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
Professional Standard - China Metal Association, How to measure elastic modulus
- CSM 01 01 02 03-2006 Uncertainty Evaluation of Measurement Result of Elastic Modulus of Steel Strand
TH-TISI, How to measure elastic modulus
- TIS 1744-1999 Concrete.determination of static modulus of elasticity in compression
RU-GOST R, How to measure elastic modulus
- GOST 210-1975 Rubber. Method for the determination of elasticity modulus at extension
- GOST 18336-1973 Rigid cellular plastics. Method of test for modulus of elasticity
- GOST R 50236-1992 Modified wood. Method for determination of modulus of elasticity in compression
- GOST 25095-1982 Sintered hardmetals. Method of determination of elastic modulus (of Young's modulus)
- GOST ISO 21181-2018 Light conveyor belts. Determination of the relaxed elastic modulus
- GOST 16483.26-1973 Wood. Determination method of modulus of elasticity in tension along fibres
- GOST 16483.27-1973 Wood. Determination method of modulus of elasticity in tension along fibres
- GOST R 57603-2017 Reinforcing filler. Method for determination of tensile strength and modulus of elasticity
- GOST 16483.31-1974 Wood. Resonance method for determination of modulus of elasticity and shear and decrement vibrations
- GOST 9622-2016 Glued laminated wood. Methods for determination of ultimate strength and modulus of elasticity in tension
- GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
- GOST 9900-2013 Glass and glass products. Methods for determination of mechanical properties. Determination of elasticity modulus at cross static bending
- GOST 18299-1972 Paintwork materials. Method for determination of tensile strength, relative elongation at tear and modulus of elasticity
- GOST R 8.942-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data.Laser Crystals (Potassium rare-earth tungstates). Elasticity constants. Elasto-optic modules for isotropic diffraction
Professional Standard - Chemical Industry, How to measure elastic modulus
Japanese Industrial Standards Committee (JISC), How to measure elastic modulus
- JIS R 1602:1995 Testing methods for elastic modulus of fine ceramics
- JIS A 1149:2001 Method of test for static modulus of elasticity of concrete
- JIS A 1149:2010 Method of test for static modulus of elasticity of concrete
- JIS A 1149:2017 Method of test for static modulus of elasticity of concrete
- JIS A 1127:2010 Methods of test for dynamic modulus of elasticity, rigidity and Poisson's ratio of concrete by resonance vibration
- JIS R 1605:1995 Testing methods for elastic modulus of fine ceramics at elevated temperature
- JIS A 1127:2001 Methods of test for dynamic modulus of elasticity, rigidity and Poisson's ratio of concrete by resonance vibration
- JIS R 1644:2002 Testing methods for elastic modulus of continuous fiber-reinforced ceramic matrix composites
- JIS K 7221-2:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
Shandong Provincial Standard of the People's Republic of China, How to measure elastic modulus
- DB37/T 2263-2012 Determination of modulus of elasticity in tension of vulcanized rubber
国家市场监督管理总局、中国国家标准化管理委员会, How to measure elastic modulus
- GB/T 38897-2020 Non-destructive testing—Measurement method for material elastic modulus and Poisson's ratio using ultrasoinc velocity
- GB/T 40406-2021 Standard test method for static modulus of elasticity and poisson's ratio of carbon materials in compression
- GB/T 39682-2020 Fine ceramics—Determination of elastic modulus at high temperature or ultra-high temperature—Split ring relative method
- GB/T 1927.10-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending
- GB/T 9966.9-2021 Test methods for natural stone—Part 9: Determination of the dynamic modulus of elasticity by measuring the fundamental resonance frequency
YU-JUS, How to measure elastic modulus
- JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
- JUS U.M1.025-1982 Concrete. Determination of static modulus of elasticity in compression
- JUS B.F8.159-1987 Noncombustible mineral boards. Determination of.modulus ofelasticity in bending
- JUS D.A1.035-1979 Testingofwood. Determination ofmodulus ofelasticitv in static ben?ing
- JUS U.J6.226-1982 Teso'ng of cellular plastics; determination of the dynamic modulus ofelasticity and the loss factor
- JUS U.J6.236-1983 Testing of plastics and damped laminated systems.Bending vibration test;determination of complex modulus of elasticity
European Committee for Standardization (CEN), How to measure elastic modulus
- EN ISO 9856:1995 Conveyor Belts - Determination of Elastic Modulus (ISO 9856 : 1989)
- EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
- EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
- EN ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
- EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
- prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
- EN 1723:1999 Light Conveyor Belts - Method of Test for the Determination of the Relaxed Elastic Modulus
- EN ISO 9856:2003 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus ISO 9856:2003
- EN 12390-13:2013 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- EN 12390-13:2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- EN ISO 9856:2003/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd 1:2012)
- EN 23312:1993 Sintered metal and hardmetals; determination of Young moduls (ISO 3312:1987)
- EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
- DD ENV 843-2-1995 Advanced Technical Ceramics - Monolithic Ceramics - Mechanical Properties at Room Temperature - Part 2: Determination of Elastic Moduli
SG-SPRING SG, How to measure elastic modulus
- SS 78 Pt.B9-1992 Testing Concrete Part B9 : Recommendations For The Measurement Of Dynamic Modulus Of Elasticity
- SS 78 Pt.A21-1987 Testing Concrete Part A21 : Method For Determination Of Static Modulus Of Elasticity In Compression
未注明发布机构, How to measure elastic modulus
- BS 1881-209:1990(1998) Testing concrete — Part 209 : Recommendations for the measurement of dynamic modulus of elasticity
- DIN EN ISO 9856:2004 Conveyor belts – determination of elastic and permanent elongation and calculation of elastic modulus
- BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
- BS EN 1723:2000 Light conveyor belts - Method of test for the determination of the relaxed elastic modulus
- BS 1881-121:1983(1998) Testing concrete — Part 121 : Method for determination of static modulus of elasticity in compression
- BS 6319-6:1984(2011) Testing of resin compositions for use in construction — Part 6 : Method for determination of modulus of elasticity in compression
- BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength
CEN - European Committee for Standardization, How to measure elastic modulus
- EN ISO 21181:2006 Light conveyor belts - Determination of the relaxed elastic modulus
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to measure elastic modulus
- GB/T 15777-2017 Method for determination of the modulus of elasticity in compression parallel to grain of wood
- GB/T 34367-2017 Light conveyor belts—Determination of the relaxed elastic modulus
- GB/T 15902-2017 Conveyor belts—Determination of elastic and permanent elongation and calculation of elastic modulus
GM Daewoo, How to measure elastic modulus
- GMKOREA EDS-T-7432-2012 Determination of Pressure Modulus and Loss Angle of Elastomers ???? ?? ???, ??? ?? ?? Version 4; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14738. [Replaced: GMKOREA
- GMKOREA EDS-T-7510-2006 TESTING OF PLASTICS DETERMINATION OF THE MODULUS OF ELASTICITY BY TENSILE, COMPRESSION AND FLEXURAL TEST (VERSION: 4)
Danish Standards Foundation, How to measure elastic modulus
- DS/EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus
- DS/EN ISO 9856:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- DS/EN ISO 9856/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- DS/ISO 6073:1989 Hydraulic fluid power. Petroleum fluids. Prediction of bulk moduli
- DS/EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
- DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
- DS/EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
- DS/EN 12390-13:2021 Testing hardened concrete – Part 13: Determination of secant modulus of elasticity in compression
- DS/EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
- DS/EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
- DS/EN 1352:2004 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
- DS/EN 13286-43:2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
- DS/EN 61300-3-42:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-42: Examinations and measurements - Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves
British Standards Institution (BSI), How to measure elastic modulus
- BS EN ISO 21181:2013 Light conveyor belts. Determination of the relaxed elastic modulus
- BS EN ISO 9856:2003+A1:2012 Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus
- BS EN ISO 9856:2016 Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus
- BS EN 14146:2004 Natural stone test methods - Determination of the dynamic elastic modulus of elasticity (by measuring the fundamental resonance frequency)
- BS EN 12390-13:2013 Testing hardened concrete. Determination of secant modulus of elasticity in compressio
- BS EN 12390-13:2021 Testing hardened concrete. Determination of secant modulus of elasticity in compression
- BS EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
- BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- BS 1881-209:1990 Testing concrete - Recommendations for the measurement of dynamic modulus of elasticity
- BS 1881-121:1983 Testing concrete - Method for determination of static modulus of elasticity in compression
- BS 6319-3:1990 Testing of resin and polymer/cement compositions for use in construction - Methods for measurement of modulus of elasticity in flexure and flexural strength
- 19/30397531 DC BS EN 12390-13. Testing hardened concrete. Part 13. Determination of secant modulus of elasticity in compression
- BS EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5:Determination of elastic moduli at elevated temperatures
- BS EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
- BS EN 13412:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
- BS EN 13286-43:2003(2017) Unbound and hydraulically bound mixtures - Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
- BS EN 13286-43:2003 Unbound and hydraulically bound mixtures - Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
- BS ISO 21713:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method
- 13/30255941 DC BS ISO 13061-4. Physical and mechanical properties of wood. Test methods for small clear specimen. Part 4. Determination of modulus of elasticity in static bending
- BS EN 1352:1997 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
- BS ISO 20343:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus of thick ceramic coatings at elevated temperature
- 19/30349557 DC BS ISO 21713. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method
- BS EN 61300-3-42:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-42: Examinations and
measurements — Attenuation of single
mode alignment sleeves and or adaptors
with resilient alignment sleeves
- BS ISO 19603:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of thick ceramic coatings
- BS ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of ceramic tube and rings
German Institute for Standardization, How to measure elastic modulus
- DIN EN ISO 21181:2007 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2005); German version EN ISO 21181:2006
- DIN EN ISO 21181:2013-09 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013); German version EN ISO 21181:2013
- DIN EN ISO 9856:2017-03 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016); German version EN ISO 9856:2016
- DIN EN 14580:2005 Natural stone test methods - Determination of static elastic modulus; German version EN 14580:2005
- DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
- DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
- DIN EN 14580:2005-07 Natural stone test methods - Determination of static elastic modulus; German version EN 14580:2005
- DIN 52377:2016-07 Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
- DIN EN 14146:2004-06 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency); German version EN 14146:2004
- DIN EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency); German version EN 14146:2004
- DIN EN 12390-13:2019 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression; German and English version prEN 12390-13:2019
- DIN EN 12390-13:2021-09 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression; German version EN 12390-13:2021
- DIN EN ISO 9856:2017 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016); German version EN ISO 9856:2016
- DIN EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013); German version EN ISO 21181:2013
- DIN 51942:2002 Testing of carbonaceous materials - Determination of dynamic modulus of elasticity by pulse excitation - Solid materials
- DIN EN 820-5:2009-10 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures; German version EN 820-5:2009
- DIN EN ISO 9856:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003 + Amd 1:2012); German version EN ISO 9856:2003 + A1:2012
- DIN EN 1352:1997-02 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1352:1996
- DIN EN 13412:2006-11 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression; German version EN 13412:2006
- DIN EN 13286-43:2003-07 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures; German version EN 13286-43:2003
- DIN EN 12390-13:2014 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression; German version EN 12390-13:2013
- DIN 51942 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of dynamic moduls of elasticity by pulse excitation - Solid materials, Corrigenda to DIN 51942:2002-03
- DIN EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures; English version of DIN EN 820-5:2009-10
- DIN EN 61300-3-42:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-42: Examinations and measurements - Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves (IEC 61300-3-42:2
ES-UNE, How to measure elastic modulus
- UNE-EN ISO 21181:2013 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013) (Endorsed by AENOR in April of 2013.)
- UNE-EN ISO 9856:2016 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016) (Endorsed by AENOR in December of 2016.)
- UNE-EN 12390-13:2022 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- UNE-EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures (Endorsed by AENOR in September of 2009.)
- UNE-EN 61300-3-42:2008 Fibre optic interconnecting devices and passive components- Basic test and measurement procedures- Part 3-42: Examinations and measurements- Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves (Endorsed by AENO...
ES-AENOR, How to measure elastic modulus
Professional Standard - Ferrous Metallurgy, How to measure elastic modulus
- YB/T 5350-2006 Method for Measuring High Temperature Elastic Modulus of Metallic Materials by Disc Oscillator Method
American Society for Testing and Materials (ASTM), How to measure elastic modulus
- ASTM C1591-04 Standard Test Method for Determination of the Modulus of Elasticity of AAC
- ASTM B223-08(2018) Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
- ASTM B223-08 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
- ASTM D6793-02 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
- ASTM D6793-02(2012) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
- ASTM D6793-02(2007) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
- ASTM C469/C469M-10 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
- ASTM C469-94 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
- ASTM C469-94e1 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
- ASTM C469-02 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
- ASTM C469-02e1 Standard Test Method for Static Modulus of Elasticity and Poisson''s Ratio of Concrete in Compression
- ASTM C885-87(2002) Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
- ASTM C885-87(2007) Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
- ASTM D7369-09 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
- ASTM C885-87(2007)e1 Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
- ASTM D7369-20 Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test
- ASTM C747-93(2005) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM D5407-95(2000) Standard Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement
- ASTM C1523-04 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
- ASTM C747-93(1998) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM C747-16 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM C1523-02 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
- ASTM C1523-17 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
- ASTM C1523-02a Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
- ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
- ASTM C747-23 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM C747-93(2010)e1 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
- ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- ASTM C580-18(2023) Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
Professional Standard - Water Conservancy, How to measure elastic modulus
- SL 135-2017 Calibration method of concrete dynamic elastic modulus tester
水利部, How to measure elastic modulus
- SL/T 135-2017 Calibration method of concrete dynamic elastic modulus measuring instrument
AENOR, How to measure elastic modulus
- UNE 53630:2010 Rubber. Determination of elasticity modulus shears. Quadruple-shear method.
- UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
- UNE 36745:2004 Test method for the determination of the modulus of elasticity of steel for reinforced concrete.
- UNE-EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
- UNE-EN 12390-13:2014 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- UNE 22950-3:1990 MECHANICAL PROPERTIES OF ROCKS. STRENGTH DETERMINATION TESTS. PART 3: MODULES OF ELASTICITY (YOUNG) AND POISSON'S RATIO DETERMINATION.
- UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
- UNE-EN 13412:2008 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
- UNE-EN 1352:1997 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
- UNE-EN 13286-43:2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
NO-SN, How to measure elastic modulus
- NS 3676-1987 Concrete testing - Hardened concrete - Modules of elasticity in compression
Professional Standard - Electron, How to measure elastic modulus
- SJ 2317-1983 Test methods for elasticity modulus and loss factor of paper stock for loudspeakers
Professional Standard - Forestry, How to measure elastic modulus
- LY/T 2382-2014 Standard test method for nondestructive evaluation of lumber using stress wave
NL-NEN, How to measure elastic modulus
- NEN-EN 310-1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
Lithuanian Standards Office , How to measure elastic modulus
- LST EN 14580-2005 Natural stone test methods - Determination of static elastic modulus
- LST EN ISO 21181:2007 Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2005)
- LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
- LST EN ISO 9856:2004 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003)
- LST EN 14146-2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
- LST EN 12390-13-2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- LST EN ISO 9856:2004/A1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd.1:2012)
- LST EN 820-5-2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
- LST EN 13412-2007 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
- LST EN 1352-2000 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
- LST EN 13286-43-2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
HU-MSZT, How to measure elastic modulus
Professional Standard - Non-ferrous Metal, How to measure elastic modulus
- YS/T 63.13-2016 Test methods for carbon materials for aluminum - Part 13: Determination of elastic modulus
BE-NBN, How to measure elastic modulus
AT-ON, How to measure elastic modulus
- OENORM EN 12390-13-2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
- ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
- ONORM B 3124 Teil.9-1986 Testing of natural stone; mechanical properties of rock; modulus of elasticity, stress-strain curve and poisson's ratio under uniaxial compressive loading
IT-UNI, How to measure elastic modulus
- UNI EN 12390-13-2021 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
The American Road & Transportation Builders Association, How to measure elastic modulus
- AASHTO T 307-1999(R2007) Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
- AASHTO T 307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
- AASHTO T307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials Twentieth Edition
- AASHTO TP31-1996 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension 2000 Edition; Interim Edition 4/2001
AASHTO - American Association of State Highway and Transportation Officials, How to measure elastic modulus
- T 307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
- TP46-1994 Standard Test Method for Determining the Resilient Modulus of Soils and Aggregate Materials
- TP31-1996 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension
- TP31-1994 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension (Edition 1B)
- T292-1991 Standard Method of Test for Resilient Modulus of Subgrade Soils and Untreated Base/Subbase Materials (Eighteenth Edition)
- T 292-1997 Standard Method of Test for Resilient Modulus of Subgrade Soils and Untreated Base/Subbase Materials (No Superseded)
- T294-1994 Standard Method of Test for Resilient Modulus of Unbound Granular Base/ Subbase Materials and Subgrade Soils - SHRP Protocol P46
Standard Association of Australia （SAA）, How to measure elastic modulus
IN-BIS, How to measure elastic modulus
IX-SA, How to measure elastic modulus
VN-TCVN, How to measure elastic modulus
- TCVN 5726-1993 Heavy weight concrete.Method for determination of prismatic compressive strength and static modulus of elasticity
- TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength
BELST, How to measure elastic modulus
- STB 1501-2013 Highways. Мethod of determination elastic modulus and uniformity consolidation of materials of layers of road designs
American National Standards Institute （ANSI), How to measure elastic modulus
- ANSI/ASTM C747:2005 Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
- ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending
US-FCR, How to measure elastic modulus
- FCR COE CRD-C 166-92-1992 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR STATIC MODULUS OF ELASTICITY OF CONCRETE IN TENSION
GOSTR, How to measure elastic modulus
- GOST R 57864-2017 Polymer composites. Test method for determination of through-thickness flatwise tensile strength and elastic modulus
NZ-SNZ, How to measure elastic modulus
- AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)
European Committee for Electrotechnical Standardization（CENELEC）, How to measure elastic modulus
- EN 61300-3-42:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-42: Examinations and measurements - Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves
International Electrotechnical Commission (IEC), How to measure elastic modulus
- IEC 61300-3-42:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-42: Examinations and measurements - Attenuation of single mode alignment sleeves and or adaptors with resilent alignment sleeves