Double 85 test standard iec

Double 85 test standard iec, Total:454 items.

In the international standard classification, Double 85 test standard iec involves: Paint ingredients, Kitchen equipment, Particle size analysis. Sieving, Acoustics and acoustic measurements, Quality, Leather technology, Optics and optical measurements, Fuel cells, Electricity. Magnetism. Electrical and magnetic measurements, Mechanical structures for electronic equipment, Graphic technology, Earthworks. Excavations. Foundation construction. Underground works, Construction materials, Soil quality. Pedology, Insulating materials, Analytical chemistry, Rubber, Shipbuilding and marine structures in general, Rubber and plastics products, Biology. Botany. Zoology, Testing of metals, Agricultural machines, implements and equipment, Plastics, Nuclear energy engineering, Water quality, Galvanic cells and batteries, Coals, Piezoelectric and dielectric devices, Electrical engineering in general, Footwear, Ceramics, Adhesives, Telecontrol. Telemetering, Materials for aerospace construction, Surface treatment and coating, Linear and angular measurements, Corrosion of metals, Electromechanical components for electronic and telecommunications equipment, Telecommunication systems, Components and accessories for telecommunications equipment, Semiconducting materials, Organic chemicals, Fibre optic communications, Electromagnetic compatibility (EMC), Applications of information technology, Insulation, Non-ferrous metals, Measurement of volume, mass, density, viscosity, Integrated circuits. Microelectronics, Semiconductor devices, Lubricants, industrial oils and related products, Radiation protection, Air quality, Magnetic materials, Electrical and electronic testing, Industrial automation systems.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Double 85 test standard iec

ASHRAE 51-1985 Laboratory Methods of Testing Fans for Rating (AMCA Standard 210-85)

CZ-CSN, Double 85 test standard iec

CSN 85 6220 Za-1987 Czech National Standard 85 6220 *Disposable injection technical parameter testing
CSN 85 6170 Za-1988 Czech Standard 85 6170* Single-use injection needle. Technical Parameters. test
CSN 85 6201 Za-1989 Czech Standard 85 8201 Technical requirements for multiple-use injection needles. Test Methods
CSN 85 6209 Za-1987 Revision a. 7 - 8/1987 Czech National Standard 85 6209 *Basic parameters for single use sampling, infusion, and blood. skills requirement. Test Methods

Institute of Electrical and Electronics Engineers (IEEE), Double 85 test standard iec

IEEE/IEC 61671-4-2016 IEC/IEEE International Standard - Standard for Automatic Test Markup Language (ATML) Test Configuration
IEC 61671-4 Edition 1.0 2016-04 IEC/IEEE International Standard - Standard for Automatic Test Markup Language (ATML) Test Configuration
IEEE/IEC 61671-6-2016 IEC/IEEE International Standard - Standard for Automatic Test Markup Language (ATML) Test Station Description
IEC 61671-6:2016 IEC/IEEE International Standard - Standard for Automatic Test Markup Language (ATML) Test Station Description
IEC 61671-6 Edition 1.0 2016-04 IEC/IEEE International Standard - Standard for Automatic Test Markup Language (ATML) Test Station Description
IEEE Std 167A.1-1995 IEEE Standard Facsimile Test Chart: Bilevel (Black and White)
IEEE/IEC 62525-2007 IEC/IEEE International Standard - Standard Test Interface Language (STIL) for Digital Test Vector Data
IEEE/IEC 62529-2012 IEC 62529:2012(E) Standard for Signal and Test Definition
IEEE/IEC 62529-2007 IEC 62529 Ed. 1 Standard for Signal and Test Definition
IEC 62529:2012*IEEE Std 1641:2010 IEC 62529:2012(E) Standard for Signal and Test Definition
IEC 62529:2012(E) (IEEE Std 1641-2010 IEC 62529:2012(E) Standard for Signal and Test Definition
IEC 62529:2007 (E) IEC 62529 Ed. 1 Standard for Signal and Test Definition
IEEE/IEC 61671-5-2016 IEC/IEEE International Standard - Automatic Test Markup Language (ATML) Test Adapter Description
IEC 61671-5 Edition 1.0 2016-04 IEC/IEEE International Standard - Automatic Test Markup Language (ATML) Test Adapter Description
IEC 62529:2012(E) (IEEE Std 1641-2010 - Redline IEC 62529:2012(E) Standard for Signal and Test Definition - Redline
IEEE/IEC 61671-2-2016 IEC/IEEE International Standard for Automatic Test Markup Language (ATML) Instrument Description
IEC 61671-2 Edition 1.0 2016-04 IEC/IEEE International Standard for Automatic Test Markup Language (ATML) Instrument Description
ISO/IEC/IEEE 32430:2021(E) IEEE/ISO/IEC International Standard--Software engineering--Trial use standard for software non-functional sizing measurements
IEEE/ISO/IEC 29119-4-2021 IEEE/ISO/IEC International Standard - Software and systems engineering--Software testing--Part 4: Test techniques
IEEE/ISO/IEC 29119-3-2021 IEEE/ISO/IEC International Standard for Software and systems engineering--Software testing--Part 3:Test documentation
IEEE/ISO/IEC 29119-4-2015 ISO/IEC/IEEE International Standard - Software and systems engineering--Software testing--Part 4: Test techniques
IEEE/ISO/IEC 29119-2-2021 ISO/IEC/IEEE International Standard - Software and systems engineering - Software testing -- Part 2: Test processes
IEEE/ISO/IEC 29119-3-2013 ISO/IEC/IEEE International Standard - Software and systems engineering -- Software testing -- Part 3: Test documentation
IEEE/ISO/IEC 29119-2-2013 ISO/IEC/IEEE International Standard - Software and systems engineering - Software testing -- Part 2:Test processes
ISO/IEC/IEEE 29119-3:2013(E) ISO/IEC/IEEE International Standard - Software and systems engineering — Software testing —Part 3: Test documentation
ISO/IEC/IEEE 29119-2:2013(E) ISO/IEC/IEEE International Standard - Software and systems engineering —Software testing —Part 2:Test processes
ISO/IEC/IEEE 29119-3:2021(E) IEEE/ISO/IEC International Standard for Software and systems engineering--Software testing--Part 3:Test documentation
ISO/IEC/IEEE 29119-2:2021(E) ISO/IEC/IEEE International Standard - Software and systems engineering - Software testing -- Part 2: Test processes
ISO/IEC/IEEE 29119-4:2021(E) IEEE/ISO/IEC International Standard - Software and systems engineering--Software testing--Part 4: Test techniques
IEEE/ISO/IEC 13210-1994 ISO/IEC/IEEE International standard for Information Technology--Test Methods for Measuring Conformance to POSIX(R)
ISO/IEC/IEEE P29119-3_FDIS, June2021 IEEE/ISO/IEC Approved Draft International Standard - Software and systems engineering -- Software testing -- Part 3: Test documentation
IEEE Std 1465-1998(R2004) [Adoption of ISO/IEC 12119: 1994(E)] IEEE Standard - Adoption of International Standard ISO/IEC 12119:1994(E) - Information Technology - Software Packages - Quality Requirements and Testing
IEEE Std 1465-1998(R2004) IEEE Standard - Adoption of International Standard ISO/IEC 12119:1994(E) - Information Technology - Software Packages - Quality Requirements and Testing
ISO/IEC13210: 1994 (E) ANSI/IEEE Std 1003.3-1991 ISO/IEC/IEEE International standard for Information Technology--Test Methods for Measuring Conformance to POSIX(R)
IEEE/IEC 62527-2007 IEC 62527 Ed. 1 (IEEE Std 1450.2(TM)-2002): Standard for Extensions to Standard Test Interface Language (STIL) for DC Level Specification
IEC 62527:2007 (E) IEC 62527 Ed. 1 (IEEE Std 1450.2(TM)-2002): Standard for Extensions to Standard Test Interface Language (STIL) for DC Level Specification
IEC 62526:2007(E) IEEE 1450.1-2005(E) IEC 62526 Ed. 1 (IEEE Std 1450.1(TM)-2005): Standard for Extensions to Standard Test Interface Language (STIL) for Semiconductor Design Environments
IEEE/ISO/IEC P29119-4_FDIS, December 2020 IEEE/ISO/IEC Draft International Standard - Software and systems engineering--Software testing--Part 4: Test techniques
ISO/IEC/IEEE P29119-3/D3_January 2021 IEEE/ISO/IEC Draft International Standard - Software and systems engineering -- Software testing -- Part 3: Test documentation
IEEE/ISO/IEC P29119-4/FDIS, June 2021 IEEE/ISO/IEC Draft International Standard - Software and systems engineering--Software testing--Part 4: Test techniques
ISO/IEC/IEEE 29119-3:2021 Red IEEE/ISO/IEC International Standard for Software and systems engineering--Software testing--Part 3:Test documentation - Redline
IEEE/ISO/IEC P29119-4/DIS, April 2020 IEEE/ISO/IEC Draft International Standard - Software and systems engineering--Software testing--Part 4: Test techniques
ISO/IEC/IEEE P29119-2/FDIS, June2021 ISO/IEC/IEEE Draft International Standard - Software and systems engineering - Software testing -- Part 2: Test processes
ISO/IEC/IEEE P29119-2/CD Second edition, August 20 ISO/IEC/IEEE Draft International Standard - Software and systems engineering - Software testing -- Part 2: Test processes
ISO/IEC/IEEE P29119-3/CD Second edition, August 20 ISO/IEC/IEEE Draft International Standard - Software and systems engineering -- Software testing --Part 3: Test documentation
ISO/IEC/IEEE 29119-2:2021 Red Iso/iec/ieee international standard - software and systems engineering - software testing -- part 2: test processes - redline
ISO/IEC/IEEE P29119-2/DIS Second edition, April 20 ISO/IEC/IEEE Draft International Standard - Software and systems engineering - Software testing -- Part 2: Test processes
ISO/IEC/IEEE P29119-3/DIS Second edition, April 20 ISO/IEC/IEEE Draft International Standard - Software and systems engineering -- Software testing --Part 3: Test documentation
ISO/IEC/IEEE P29119-2/DIS Second edition, April 2020 ISO/IEC/IEEE Draft International Standard - Software and systems engineering - Software testing -- Part 2: Test processes
ISO/IEC/IEEE P29119-3/DIS Second edition, April 2020 ISO/IEC/IEEE Draft International Standard - Software and systems engineering -- Software testing --Part 3: Test documentation
ISO/IEC/IEEE P29119-2_FDIS, December 2020 ISO/IEC/IEEE Draft International Standard - Software and systems engineering - Software testing -- Part 2: Test processes
ISO/IEC/IEEE P29119-4/FDIS, August 2019 ISO/IEC/IEEE Draft International Standard - Software and systems engineering--Software testing--Part 4: Test techniques
ISO/IEC/IEEE P29119-2/CD Second edition, August 2019 ISO/IEC/IEEE Draft International Standard - Software and systems engineering - Software testing -- Part 2: Test processes
ISO/IEC/IEEE P29119-3/CD Second edition, August 2019 ISO/IEC/IEEE Draft International Standard - Software and systems engineering -- Software testing --Part 3: Test documentation
ISO/IEC/IEEE 29119-4:2021(E) - Redline IEEE/ISO/IEC International Standard - Software and systems engineering--Software testing--Part 4: Test techniques - Redline
ISO/IEC/IEEE 29119-2:2021(E) - Redline ISO/IEC/IEEE International Standard - Software and systems engineering - Software testing -- Part 2: Test processes - Redline
ISO/IEC/IEEE 29119-3:2021(E) - Redline IEEE/ISO/IEC International Standard for Software and systems engineering--Software testing--Part 3:Test documentation - Redline
IEC 62526:2007*IEEE 1450.1:2005 IEC 62526 Ed. 1 (IEEE Std 1450.1(TM)-2005): Standard for Extensions to Standard Test Interface Language (STIL) for Semiconductor Design Environments
IEEE/IEC 62526-2007 IEC 62526 Ed. 1 (IEEE Std 1450.1(TM)-2005): Standard for Extensions to Standard Test Interface Language (STIL) for Semiconductor Design Environments
IEEE/ISO/IEC 29119-5-2016 ISO/IEC/IEEE International Standard - Software and systems engineering -- Software testing -- Part 5: Keyword-Driven Testing
ISO/IEC/IEEE 29119-5 First edition 2016-11-15 ISO/IEC/IEEE International Standard - Software and systems engineering -- Software testing -- Part 5: Keyword-Driven Testing
ISO/IEC/IEEE P29119-5-FDIS1, July 2016 ISO/IEC/IEEE Approved Draft International Standard - Software and Systems Engineering -- Software Testing -- Part 5: Keyword-Driven Testing
IEC 60076-21:2018*IEEE Std C57.15:2017 IEC/IEEE International Standard- Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators
ISO/IEC/IEEE P29119-5-CD1 April 2014 ISO/IEC/IEEE Draft International Standard Software and Systems Engineering -- Software Testing -- Part 5: Keyword-Driven Testing
ISO/IEC/IEEE P29119-5-DIS2-1504 ISO/IEC/IEEE Draft International Standard - Software and Systems Engineering -- Software Testing -- Part 5: Keyword-Driven Testing
ISO/IEC/IEEE DIS P29119-5, August 2014 ISO/IEC/IEEE Draft International Standard Software and Systems Engineering -- Software Testing -- Part 5: Keyword-Driven Testing
ISO/IEC/IEEE P29119-5, October 2023 ISO/IEC/IEEE Draft International Standard for Software and systems engineering -- Software testing -- Part 5: Keyword-Driven Testing
IEEE/ISO/IEC P29119-5 ISO/IEC/IEEE Draft International Standard for Software and systems engineering -- Software testing -- Part 5: Keyword-Driven Testing
IEEE/IEC C57.15-2017 IEEE/IEC International Standard- Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators
IEC 60076-21:2018(E) IEEE Std C57.15-2017 IEC/IEEE International Standard- Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators
IEEE/IEC 62243-2002 IEC/IEEE International Standard - Artificial intelligence exchange and service tie to all test environments (AI-ESTATE)
IEEE/ISO/IEC 29119-1-2021 ISO/IEC/IEEE International Standard - Software and systems engineering --Software testing --Part 1:General concepts
ISO/IEC/IEEE 29119-1:2022(E) ISO/IEC/IEEE International Standard - Software and systems engineering --Software testing --Part 1:General concepts
IEEE/IEC 60079-30-1-2015 IEC/IEEE International Standard - Explosive atmospheres -- Part 30-1: Electrical resistance trace heating -- General and testing requirements
ISO/IEC/IEEE P29119-1/DIS, September 2012 SO/IEC/IEEE Draft Standard for Software and Systems Engineering--Software Testing--Part 1: Concepts and Definitions
ISO/IEC/IEEE 29119-1:2013(E) ISO/IEC/IEEE International Standard - Software and systems engineering —Software testing —Part 1:Concepts and definitions
IEC/IEEE 60079-30-1 Edition 1.0 2015-09 IEC/IEEE International Standard - Explosive atmospheres -- Part 30-1: Electrical resistance trace heating -- General and testing requirements
IEC/IEEE P60079-30-1/D9.1, 2015 IEC/IEEE Approved Draft International Standard - Explosive Atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
ISO/IEC/IEEE P29119-1/FDIS, September 2021 ISO/IEC/IEEE Approved Draft International Standard - Software and systems engineering--Software testing--Part 1: Concepts and definitions
IEC/IEEE P61007-389/CD, June 2023 IEEE/IEC Draft International Standard for Transformers and Inductors for use in Electronic and Telecommunication Equipment - Measuring Methods and Test Procedures
IEEE/IEC P61007-389 IEEE/IEC Draft International Standard for Transformers and Inductors for use in Electronic and Telecommunication Equipment - Measuring Methods and Test Procedures
IEEE/IEC P60079-30-1 IEEE/IEC Draft International Standard - Explosive atmospheres -- Part 30-1: Electrical resistance trace heating -- General and testing requirements
IEC/IEEE FDIS P60079-30-1, 2015 IEC/IEEE Draft International Standard - Explosive Atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
IEEE/IEC P60079-30-1 D5, January 2022 IEEE/IEC Draft International Standard - Explosive atmospheres -- Part 30-1: Electrical resistance trace heating -- General and testing requirements
ISO/IEC/IEEE P29119-1/CD, June 2020 ISO/IEC/IEEE Draft International Standard - Software and systems engineering --Software testing--Part 1: Concepts and definitions
IEEE/ISO/IEC P29119-1 ISO/IEC/IEEE Draft International Standard - Software and systems engineering--Software testing--Part 1: Concepts and definitions
ISO/IEC/IEEE P29119-1/FDIS, September 2021 ISO/IEC/IEEE Draft International Standard - Software and systems engineering--Software testing--Part 1: Concepts and definitions
ISO/IEC/IEEE P29119-1/DIS, December 2020 ISO/IEC/IEEE Draft International Standard - Software and systems engineering--Software testing--Part 1: Concepts and definitions
IEEE 1453-2011 Adoption of IEC 61000-4-15:2010, Electromagnetic compatibility (EMC) - Testing and measurement techniques - Flickermeter - Functional and design specifications
IEC 63003:2015*IEEE Std 1505.1:2015 IEC/IEEE International standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505(TM)
IEEE/IEC 63003-2015 IEC/IEEE International standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505(TM)
IEEE/IEC 62528-2007 IEC 62528 Ed. 1 (IEEE Std 1500(TM)-2005): Standard Testability Method for Embedded Core-based Integrated Circuits
IEEE/ISO/IEC 26513-2017 ISO/IEC/IEEE International Standard - Systems and software engineering -- Requirements for testers and reviewers of information for users
IEC 62528:2007 (E) IEC 62528 Ed. 1 (IEEE Std 1500(TM)-2005): Standard Testability Method for Embedded Core-based Integrated Circuits
ISO/IEC/IEEE 26513:2017(E) ISO/IEC/IEEE International Standard - Systems and software engineering -- Requirements for testers and reviewers of information for users
IEC 63003 Edition 1.0 2015-12 IEEE Std 1505.1 IEC/IEEE International standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505(TM)
IEC/IEEE P62395-1/CD, April 2022 IEEE/IEC Draft Standard - Electrical Resistance Trace Heating Systems for Industrial and Commercial Applications – Part 1: General and testing requirements
IEEE Std 26513-2010 IEEE Standard for Adoption of ISO/IEC 26513:2009 Systems and Software Engineering--Requirements for Testers and Reviewers of Documentation
ISO/IEC/IEEE 26513:2017(E) - Redline ISO/IEC/IEEE International Standard - Systems and software engineering -- Requirements for testers and reviewers of information for users - Redline
IEC 62243:2005*IEEE 1232:2012 IEC 62243 Ed. 1 (IEEE Std 1232(TM)-2002): Standard for Artificial Intelligence Exchange and Service Tie to All Test Environments (AI- ESTATE)
ISO/IEC/IEEE 26513:2017 Red ISO/IEC/IEEE International Standard - Systems and software engineering -- Requirements for testers and reviewers of information for users - Redline
ISO/IEC/IEEE DIS P26513, March 2016 ISO/IEC/IEEE International Draft Standard - Systems and Software Engineering -- Requirements for Testers and Reviewers of User Documentation
ISO/IEC/IEEE CD P26513/D1, August 2015 ISO/IEC/IEEE International Draft Standard - Systems and Software Engineering -- Requirements for Testers and Reviewers of User Documentation
ISO/IEC/IEEE P26513_D2, January 2017 ISO/IEC/IEEE International Draft Standard - Systems and Software Engineering -- Requirements for Testers and Reviewers of User Documentation
IEC 62243 First edition 2005-07 IEEE 1232 IEC 62243 Ed. 1 (IEEE Std 1232(TM)-2002): Standard for Artificial Intelligence Exchange and Service Tie to All Test Environments (AI- ESTATE)
IEEE/IEC P62395-1 IEEE/IEC Draft Standard - Electrical Resistance Trace Heating Systems for Industrial and Commercial Applications ¿¿¿ Part 1: General and testing requirements
IEC/IEEE P62395-1/CD, December 2022 IEEE/IEC Draft Standard - Electrical Resistance Trace Heating Systems for Industrial and Commercial Applications – Part 1: General and testing requirements
IEC/IEEE P60079-30-1/D7A, July 2013 IEEE/IEC Draft Standard for Explosive Atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements for Industrial Applications
IEEE Unapproved Draft Std P26513/D1, Dec 2009 IEEE Draft Standard Adoption of ISO/IEC 26513:2009 -- Systems and Software Engineering -- Requirements for Testers and Reviewers of User Documentation
IEEE/IEC 61636-1-2021 IEC/IEEE International Standard-Software Interface for Maintenance Information Collection and Analysis (SIMICA): Exchanging Test Results and Session Information via the eXtensible Markup Language (XML)
IEEE/ISO/IEC 14515-1-2000 ISO/IEC/IEEE International Standard for Information Technology -- Portable Operating System Interface (POSIX(R)) -- Test methods for measuring conformance to POSIX -- Part 1: System interfaces
ISO/IEC 14515-1:2000 IEEE Std 2003.1-2000 ISO/IEC Standard for Information Technology--Portable Operating System Interface (POSIX®) System--Test Methods for Measuring Conformance to POSIX®--Part 1: System Interfaces
ISO/IEC 14515-2_2003 IEEE Std 2003.2-1996 ISO/IEC International Standard for Information technology--Portable Operating System Interface (POSIX)--Test methods for measuring conformance to POSIX--Part 2:Shell and utilities
IEEE P26513/D1, December 2009 IEEE Draft Standard Adoption of ISO/IEC 26513:2009 Systems and Software Engineering Requirements for Testers and Reviewers of User Documentation

American Society for Testing and Materials (ASTM), Double 85 test standard iec

ASTM D801-02(2009) Standard Test Methods for Sampling and Testing Dipentene
ASTM D801-02(2013) Standard Test Methods for Sampling and Testing Dipentene
ASTM E1181-87(1998)e1 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM E1181-02 Standard Test Methods for Characterizing Duplex Grain Sizes
ASTM E1124-10 Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
ASTM F1181-19 Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM E1124-97(2004) Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
ASTM F1181-09(2014) Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM F1181-09 Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM E1124-10(2016) Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
ASTM F1425-92(1996) Standard Test Method for Determining the Tribocharge of Two-Component Developer Materials
ASTM F1425-92(2001) Standard Test Method for Determining the Tribocharge of Two-Component Developer Materials
ASTM D3385-18 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
ASTM D4221-18 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
ASTM D4221-17 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
ASTM G187-23 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM D6143-05 Standard Test Method for Iron Content of Bisphenol A (4,4180; - Isopropylidenediphenol)
ASTM E2313-04 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)
ASTM D3385-94 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
ASTM D8169/D8169M-18 Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load
ASTM G187-18 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM D816-06(2016) Standard Test Methods for Rubber Cements
ASTM G187-05 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM G187-12 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM G187-12a Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM D3385-03 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
ASTM F2469-20 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D5418-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
ASTM D5418-99 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
ASTM E1022-94(2002) Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks
ASTM D4221-11 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
ASTM A1084-13 Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
ASTM A1084-15a Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
ASTM F2469-05 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D5093-90(1997) Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
ASTM E2489-16 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM F2469-15 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D4754-18 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
ASTM D5093-15e1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM A1084-15a(2022) Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
ASTM A1084-15 Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
ASTM D5093-15 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM C1871-22 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM D7574-23 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D7131-05 Standard Test Method for Determination of Ion Exchange Capacity (IEC) in Grafted Battery Separator
ASTM C1871-18a Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM D5093-02 Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
ASTM A923-06 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM C1871-18 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM A923-22 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM A923-23 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM A923-08 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM A923-14 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM D5263-93(2008) Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
ASTM D5093-02(2008) Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM D4093-95 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM C1499-15 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM D3528-96(2016) Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM D7574-09 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
ASTM A923-98 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
ASTM D3528-96(2008) Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM A923-01e1 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
ASTM A923-03 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
ASTM E2469-08 Standard Test Method for Chloride in Monoethylene Glycol by Ion Chromatography
ASTM E2469-16 Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography
ASTM D7093-13 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
ASTM D7093-19 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
ASTM B588-88(2010) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
ASTM D7574-16 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
ASTM E1349-90(1998) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
ASTM B651-83(2010) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM B588-88(2001) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
ASTM E1349-06(2022) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
ASTM F1529-02 Standard Test Method for Sheet Resistance Uniformity Evaluation by In-Line Four-Point Probe with the Dual-Configuration Procedure
ASTM E2679-09(2016)e1 Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol byNon-Aqueous Potentiometric Titration
ASTM B651-83(2019) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM D2339-98 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM D4093-95(2001)e1 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D2339-98(2011) Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM D4093-23 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D2339-98(2017) Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM D4093-95(2014) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D2339-98(2004) Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM E2679-09 Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by
Non-Aqueous Potentiometric Titration
ASTM E1917-97 Standard Test Method for Determination of Phosphorous in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Molecular Absorption Spectrometric Method
ASTM E1917-02 Standard Test Method for Determination of Phosphorous in Nickel, Ferronickel, and Nickel Alloys by the Phosphovanadomolybdate Molecular Absorption Spectrometric Method
ASTM D1481-93(1997) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-91 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM E1855-20 Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
ASTM D1481-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D1481-02(2007) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
ASTM D6047-99(2003) Standard Test Methods for Rubber, Raw--Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM E1855-04 Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
ASTM E1855-04e1 Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
ASTM D6047-99(2009) Standard Test Methods for Rubber, Raw--Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D6047-99(2014) Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D6047-15 Standard Test Methods for Rubber, Raw&x2014;Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D6047-17 Standard Test Methods for Rubber, Raw&x2014;Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
ASTM D8165-19 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D8165-19a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D8165-20a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D8165-21 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D8165-20 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D8165-17 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D1480-93(1997) Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM E1855-05 Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
ASTM E1855-96 Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
ASTM E1855-15 Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
ASTM E1050-10 Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System
ASTM E1855-05e1 Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
ASTM D3266-91(2000)e1 Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
ASTM D3266-91(2018) Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
ASTM E1349-06(2018) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
ASTM E1349-06(2013) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45deg;:0deg; or 0deg;:45deg;) Geometry
ASTM D7858-13(2018) Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry

American National Standards Institute （ANSI), Double 85 test standard iec

ANSI/ASTM F1605:2014 Standard Test Method for Performance of Double-Sided Griddles
ANSI/IEEE 1453:2011 Recommended Practice for Adoption of IEC 61000-4-15:2010, Electromagnetic Compatibility (EMC)-Testing
ANSI/ASTM E2489:2016 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs

AASHTO - American Association of State Highway and Transportation Officials, Double 85 test standard iec

T242-1992 Standard Method of Test for Frictional Properties of Paved Surfaces Using a Full-Scale Tire (ASTM E274-85)
T 208-1996 Standard Method of Test for Unconfined Compressive Strength of Cohesive Soil (HM-22; Part IIB; ASTM Designation D 2166-85)
T110-1994 Standard Method of Test for Moisture or Volatile Distillates in Bituminous Paving Mixtures (Twentieth Edition; ASTM D1461-85)
TP 100-2012 Standard Method of Test for Deep Foundation Elements under Bidirectional Static Axial Compressive Load
T 110-1994 Standard Method of Test for Moisture or Volatile Distillates in Bituminous Paving Mixtures (HM-22; Part IIA; ASTM Designation D 1461-85)
TP24-1994 Standard Test Method for Determining the Density of Freshly Mixed Concrete in Place Using a Twin-Probe Nuclear Density Gauge
T 363-2017 Standard Method of Test for Evaluating Stress Development and Cracking Potential due to Restrained Volume Change Using a Dual Ring Test

Korean Agency for Technology and Standards (KATS), Double 85 test standard iec

KS A 3255-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3255-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3259-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS UNKNOWN, TWO-SIDED)
KS C IEC 60870-5-6-2022 Telecontrol equipment and systems－Part 5－6：Guidelines for conformance testing for the IEC 60870－5 companion standards
KS C IEC TS 60870-5-604-2014(2019) Telecontrol equipment and systems — Part 5-604: Conformance test cases for the IEC 60870－5-104 companion standard
KS C IEC TS 60870-5-604-2019 Telecontrol equipment and systems — Part 5-604: Conformance test cases for the IEC 60870－5-104 companion standard
KS C IEC 60870-5-601-2019 Telecontrol equipment and systems — Part 5-601: Conformance test cases for the KS C IEC 60870－5-101 companion standard
KS C IEC 61935-3:2014 Testing of balanced and coaxial information technology cabling — Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
KS C IEC 61935-3-2014(2019) Testing of balanced and coaxial information technology cabling — Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
KS C IEC 61935-3-2019 Testing of balanced and coaxial information technology cabling — Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Double 85 test standard iec

JEDEC JESD203-2005 Standard Test Loads For Dual - Supply Level Translation Devices

GSO, Double 85 test standard iec

GSO ASTM D4705:2021 Standard Test Method for Stitch Tear Strength of Leather, Double Hole
BH GSO ASTM D4705:2022 Standard Test Method for Stitch Tear Strength of Leather, Double Hole
GSO IEC 61587-3:2013 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks
GSO IEC 61587-1:2015 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor conditions
OS GSO IEC 60870-5-601:2013 Telecontrol equipment and systems - Part 5-601: Conformance test cases for the IEC 60870-5-101 companion standard
BH GSO IEC 60870-5-601:2016 Telecontrol equipment and systems - Part 5-601: Conformance test cases for the IEC 60870-5-101 companion standard
BH GSO IEC/TS 60870-5-604:2016 Telecontrol equipment and systems - Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard
GSO IEC TS 60870-5-601:2013 Telecontrol equipment and systems - Part 5-601: Conformance test cases for the IEC 60870-5-101 companion standard
GSO IEC 60870-5-6:2015 Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards
GSO IEC 61935-2:2021 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards
BH GSO IEC 61935-2:2022 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards
OS GSO IEC 61935-3:2010 Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
BH GSO IEC 61935-3:2011 Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards

US-CFR-file, Double 85 test standard iec

CFR 40-85.2207-2014 Protection of Environment. Part85:Control of air pollution from mobile sources. Section85.2207:Onboard diagnostic test standards.
CFR 40-85.1515-2014 Protection of Environment. Part85:Control of air pollution from mobile sources. Section85.1515:Emission standards and test procedures applicable to imported nonconforming motor vehicles and motor vehicle engines.

Group Standards of the People's Republic of China, Double 85 test standard iec

T/ZJCX 0034-2023 Test standard of graphite bipolar plate characteristics for proton exchange membrane fuel cell

International Electrotechnical Commission (IEC), Double 85 test standard iec

IEC 61587-4:2012 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 4: Combination of performance levels for modular cabinets
IEC 61587-2:2011 IEC 61587-2, Ed. 2.0: Mechanical structures for electronic equipment - Tests for IEC 60917 and 60297 - Part 2: Seismic tests for cabinets and racks
IEC 57/738/DTS:2004 IEC 60870-5-601 TS, Ed. 1.0: Telecontrol equipment and systems - Part 5-601: Conformance test cases for the IEC 60870-5-101 companion standard
IEC 57/822/DTS:2006 IEC 60870-5-604 TS, Ed. 1: Telecontrol equipment and systems - Part 5-604: Conformance test cases for the IEC 60870-5-104 - Companion Standard
IEC 61587-1:2011 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1: Environmental requirements, test-set-up and safety aspects for cabinets, racks, subracks and chassis under indoor conditions
IEC TS 60870-5-601:2006 Telecontrol equipment and systems - Part 5-601: Conformance test cases for the IEC 60870-5-101 companion standard
IEC TS 60870-5-604:2016 RLV Telecontrol equipment and systems - Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard
IEC 61935-1:2009/COR1:2010 Specification for the testing of balanced and coaxial information technology cabling – Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards CORRIGENDUM 1 (Edition 3.0)
IEC TS 60870-5-601:2015 Telecontrol equipment and systems - Part 5-601: Transmission protocols - Conformance test cases for the IEC 60870-5-101 companion standard
IEC 61326-2-4:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and f
IEC 61935-3:2008 Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
IEC 61935-1-1:2019 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801-1 and related standards
IEC 61935-2:2022 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801-1 and related standards
IEC 61935-2:2022 CMV Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801-1 and related standards

未注明发布机构, Double 85 test standard iec

ASTM RR-D16-1075 2020 D4789 - Standard Test Method for Solution Color of Bisphenol A (4,4′-Isopropylidenediphenol)
ANSI/ISA 82.02.01-1999 Safety Standard for Electrical and Electronic Test, Measuring, Controlling, and Related Equipment — General Requirements Harmonized Standard to IEC Publication 1010-1
ANSI/TIA-568-C.2-2-2014 Balanced Twisted-Pair Telecommunications Cabling and Components Standard, Addendum 2: Alternative Test Methodology for Category 6A Patch Cords

Lithuanian Standards Office , Double 85 test standard iec

LST EN 60212-2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials (IEC 60212:2010)
LST EN 61075-2002 Loran-C receivers for ships. Minimum performance standards. Methods of testing and required test results (IEC 61075:1991)
LST EN 60689-2009 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values (IEC 60689:2008)
LST EN 61340-4-3-2002 Electrostatics. Part 4-3: Standard test methods for specific applications. Footwear (IEC 61340-4-3:2001)
LST EN 61935-2-2011 Specification for the testing of balanced and coaxial information technology cabling -- Part 2: Cords as specified in ISO/IEC 11801 and related standards (IEC 61935-2:2010)
LST EN 61926-1-2002 Design automation. Part 1: Standard test language for all systems. Common abbreviated test language for all systems (C/ATLAS) (IEC 61926-1:1999)
LST EN 62217-2006 Polymeric insulators for indoor and outdoor use with a nominal voltage > 1 000 V - General definitions, test methods and acceptance criteria (IEC 62217:2005)
LST EN 62217-2006/AC-2007 Polymeric insulators for indoor and outdoor use with a nominal voltage > 1 000 V - General definitions, test methods and acceptance criteria (IEC 62217:2005)
LST EN IEC 60749-41:2020 Semiconductor devices - Mechanical and climatic test methods - Part 41: Standard reliability testing methods of non-volatile memory devices (IEC 60749-41:2020)
LST EN 60870-5-6-2009 Telecontrol equipment and systems -- Part 5-6: Guidelines for conformance testing for the EN 60870-5 companion standards (IEC 60870-5-6:2006)
LST EN 60216-2-2005 Electrical insulating materials. Thermal endurance properties. Part 2: Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria (IEC 60216-2:2005)

European Committee for Standardization (CEN), Double 85 test standard iec

DD ENV 13065-1998 Bar Coding - Test Specifications for Bar Code Masters Superseded by EN ISO/IEC 15421:2001

AENOR, Double 85 test standard iec

UNE 32320:1995 EXPANSION OR CONTRACTION OF COAL BY THE SOLE-HEATED OVEN. STANDARD TEST METHOD WITH DOUBLE-CHAMBER OVEN.

ISUZU - Isuzu Motors Ltd., Double 85 test standard iec

INDEX VOLUME 1-2010 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Metal BILINGUAL (Japanese/English Version)
INDEX VOLUME 1-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Metal BILINGUAL (Japanese/English Version)
INDEX VOLUME 1-2006 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Metal BILINGUAL (Japanese/English Version)
INDEX VOLUME 1-2013 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Metal BILINGUAL (Japanese/English Version)
INDEX VOLUME 1-2014 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Metal BILINGUAL (Japanese/English Version)
INDEX VOLUME 1-2004 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Metal BILINGUAL (Japanese/English Version)
INDEX VOLUME 1-2012 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Metal BILINGUAL (Japanese/English Version)
INDEX VOLUME 1-2005 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Metal BILINGUAL (Japanese/English Version)
INDEX VOLUME 5-2007 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL
INDEX VOLUME 6-2005 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2013 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2006 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2010 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2008 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2014 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2007 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2011 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 6-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Misellaneous BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2010 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2013 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2012 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2006 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2004 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2008 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2003 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2005 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 3-2014 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Coating BILINGUAL (Japanese/English Version)
INDEX VOLUME 5-2011 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
INDEX VOLUME 5-2008 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
INDEX VOLUME 5-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
INDEX VOLUME 5-2010 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
INDEX VOLUME 5-2005 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
INDEX VOLUME 5-2006 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
INDEX VOLUME 5-2013 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Plastics & Rubbers BILINGUAL (Japanese/English Version)
INDEX VOLUME 2-2004 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
INDEX VOLUME 2-2011 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
INDEX VOLUME 2-2008 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
INDEX VOLUME 2-2007 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
INDEX VOLUME 2-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
INDEX VOLUME 2-2006 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS - Adhesive/Sealer BILINGUAL (Japanese/English Version)
INDEX VOLUME 4-2007 ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japenese/English Version)
INDEX VOLUME 4-2009 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)
INDEX VOLUME 4-2011 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)
INDEX VOLUME 4-2014 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)
INDEX VOLUME 4-2010 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS- Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)
INDEX VOLUME 4-2013 INDEX of ISUZU ENGINEERING STANDARDS - MATERIALS & TEST METHODS-Fuels/Lubricants & Coolant BILINGUAL (Japanese/English Version)

The American Road & Transportation Builders Association, Double 85 test standard iec

AASHTO TP 100-2012 Standard Method of Test for Deep Foundation Elements under Bidirectional Static Axial Compressive Load
AASHTO TP 100-2012(R2018) Standard Method of Test for Deep Foundation Elements under Bidirectional Static Axial Compressive Load
AASHTO T 385-2019 Standard Method of Test for Deep Foundation Elements under Bidirectional Static Axial Compressive Load
AASHTO TP 113-2015 Standard Method of Test for Determination of Asphalt Binder Resistance to Ductile Failure Using Double-Edge-Notched Tension (DENT) Test
AASHTO TP 113-2015(R2019) Standard Method of Test for Determination of Asphalt Binder Resistance to Ductile Failure Using Double-Edge-Notched Tension (DENT) Test
AASHTO T 363-2017 Standard Method of Test for Evaluating Stress Development and Cracking Potential due to Restrained Volume Change Using a Dual Ring Test
AASHTO TP24-1994 Standard Test Method for Determining the Density of Freshly Mixed Concrete in Place Using a Twin-Probe Nuclear Density Gauge 2000 Edition; Interim Edition 4/2001 R(1996)

Japanese Industrial Standards Committee (JISC), Double 85 test standard iec

JIS C 6011-2:2011 Tests for enclosures for JIS C 6010 (all parts) and IEC 60297 (all parts) -- Part 2: Seismic tests for cabinets and racks
JIS C 6011-3:2011 Tests for enclosures for JIS C 6010 (all parts) and IEC 60297 (all parts) -- Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks
JIS C 6011-1:2011 Tests for enclosures for JIS C 6010 (all parts) and IEC 60297 (all parts) -- Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis

SCC, Double 85 test standard iec

DIN IEC 62624 E:2009 Draft Document - IEEE Standard test methods for measurement of electrical properties of carbon nanotubes (IEC 113/58A/FDIS:2009)
DIN EN IEC 63137-1:2020 Standard test radio-frequency connectors - Part 1: Generic specification - General requirements and test methods (IEC 63137-1:2019); German version EN IEC 63137-1:2019
DIN IEC 60212 E:2010 Draft Document - Standard conditions for use prior to and during the testing of solid electrical insulating materials (IEC 112/138/CD:2009)
DIN EN 61340-4-6:2016 Electrostatics - Part 4-6: Standard test methods for specific applications - Wrist straps (IEC 61340-4-6:2015); German version EN 61340-4-6:2015
DIN EN 61340-4-7:2018 Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization (IEC 61340-4-7:2017); German version EN 61340-4-7:2017
DIN EN IEC 61340-4-3:2018 Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear (IEC 61340-4-3:2017); German version EN IEC 61340-4-3:2018
DIN EN 63137-1 E:2018 Draft Document - Standard test radio-frequency connectors - Part 1: Generic specification - General requirements and test methods (IEC 46F/380/CD:2017)
DIN IEC /TS 60870-5-604:2010 Telecontrol equipment and systems - Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard (IEC/TS 60870-5-604:2007)
DIN IEC /TS 60870-5-601:2009 Telecontrol equipment and systems - Part 5-601: Conformance test cases for the IEC 60870-5-101 companion standard (IEC/TS 60870-5-601:2006)
CEI EN 60870-5-6:2010 Telecontrol equipment and systems Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards
DIN EN 61340-4-3 E:2016 Draft Document - Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear (IEC 101/487/CD:2015)
DIN EN 62326-18 E:2013 Draft Document - Printed boards - Part 18: Standard on Device Embedded Substrate - Test methods (IEC 91/1083/CD:2013)
DIN EN 61340-4-6 E:2011 Draft Document - Electrostatics - Part 4-6: Standard test methods for specific applications - Wrist straps (IEC 101/329/CD:2011)
DIN EN 61340-4-9 E:2011 Draft Document - Electrostatics - Part 4-9: Standard test methods for specific applications - Garments (IEC 101/331/CD:2011)
DIN EN 61340-4-7 E:2011 Draft Document - Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization (IEC 101/335/CD:2011)
DIN IEC 61340-4-9 E:2009 Draft Document - Electrostatics - Part 4-9: Standard test methods for specific applications - Garments (IEC 101/270/CDV:2008)
DIN EN IEC 61853-4:2019 Photovoltaic (PV) module performance testing and energy rating - Part 4: Standard reference climatic profiles (IEC 61853-4:2018); German version EN IEC 61853-4:2018
DIN IEC /TS 62896:2016 Hybrid insulators for a.c. and d.c. high-voltage applications - Definitions, test methods and acceptance criteria (IEC/TS 62896:2015)
DIN EN 61935-2 E:2016 Draft Document - Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards (IEC 46/614/CD:2016)
DIN IEC /TS 61340-4-2:2016 Electrostatics - Part 4-2: Standard test methods for specific applications - Electrostatic properties of garments (IEC/TS 61340-4-2:2013)
DIN EN 61340-4-8 E:2011 Draft Document - Electrostatics - Part 4-8: Standard test methods for specific applications - Discharge shielding - Bags (IEC 101/330/CD:2011)
ASTM F1529-97 Standard Test Method for Sheet Resistance Uniformity Evaluation by In-Line Four-Point Probe with the Dual-Configuration Procedure (Withdrawn 2003)
DANSK DS/IEC TS 60870-5-601:2015 Telecontrol equipment and systems - Part 5-601: Transmission protocols - Conformance test cases for the IEC 60870-5-101 companion standard
DIN EN 61340-4-9:2020 Electrostatics - Part 4-9: Standard test methods for specific applications - Garments (IEC 61340-4-9:2016); German version EN 61340-4-9:2016
DIN EN 61853-4 E:2016 Draft Document - Photovoltaic (PV) module performance testing and energy rating - Part 4: Standard reference climatic profiles (IEC 82/1067/CD:2016)
DANSK DS/EN 61935-2:2010 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards
CEI EN 61935-2:2011 Specification for the testing of balanced and coaxial information technology cabling Part 2: Cords as specified in ISO/IEC 11801 and related standards
DIN IEC /TS 62896 E:2014 Draft Document - Hybrid insulators for a.c. and d.c. applications with nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria (IEC 36/348/CD:2014)
DIN IEC 61935-2 E:2009 Draft Document - Specification for the testing of balanced and coaxial information technology cabling - Part 2: Patch cords and work area cords as specified in ISO/IEC 11801 and related standards (IEC 46/294/CD:2008)
DIN EN 62217 E:2011 Draft Document - Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria (IEC 36/300/CDV:2011); German version FprEN 62217:2011

SE-SIS, Double 85 test standard iec

SIS SS IEC 318:1985 Acoustics - An IEC artificial ear, of the wide band type, for the calibration of earphones used in audiometry

ISA - International Society of Automation, Double 85 test standard iec

ISA S82.01-1994 Safety Standard for Electrical and Electronic Test@ Measuring@ Controlling and Related Equipment - General Requirements Harmonized Standard to IEC Publication 1010-1

British Standards Institution (BSI), Double 85 test standard iec

PD IEC/TS 60870-5-604:2016 Telecontrol equipment and systems. Conformance test cases for the IEC 60870-5-104 companion standard
23/30473243 DC BS EN IEC 61340-4-11. Electrostatics - Part 4-11. Standard test methods for specific applications. Testing of electrostatic properties of composite IBC
21/30402789 DC BS EN IEC 61340-4-11. Electrostatics. Part 4-11. Standard test methods for specific applications. Testing of electrostatic properties of composite IBC
PD IEC/TS 60870-5-601:2015 Telecontrol equipment and systems. Transmission protocols. Conformance test cases for the IEC 60870-5-101 companion standard
BS ISO/IEC 29109-1:2009 Information technology - Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794: Generalized conformance testing methodology
BS EN 60512-26-100:2009 Connectors for electronic equipment. Tests and measurements. Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7. Tests 26a to 26g
BS EN 60512-26-100:2008 Connectors for electronic equipment — Tests and measurements — Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 — Tests 26a to 26g
BS EN 61326-2-4:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment
BS EN 61326-2-4:2007 Electrical equipment for measurement, control and laboratory use - EMC requirements - Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices, according to IEC 61557-8 and for equipm
BS EN 60512-27-100:2012 Connectors for electronic equipment. Tests and measurements. Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors
23/30456799 DC BS EN ISO/IEC 18013-4 AMD 1. Personal identification. ISO-compliant driving licence - Part 4. Test methods. Test methods for compact encoding
19/30350992 DC BS EN IEC 60749-41. Semiconductor devices. Mechanical and climatic test methods. Part 41. Standard reliability testing methods of non-volatile memory devices
BS EN 60512-26-100:2008+A1:2011 Connectors for electronic equipment. Tests and measurements. Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 Tests 26a to 26g
BS EN 61935-2:2010 Specification for the testing of balanced and coaxial information technology cabling. Part 2: Cords as specified in ISO/IEC 11801 and related standards
21/30432308 DC BS EN IEC 62217. Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
19/30364698 DC BS EN IEC 62217. Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
21/30450000 DC BS EN IEC 62217. Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
23/30472671 DC BS EN IEC 62217. Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
16/30301980 DC BS ISO/IEC 18013-4 AMD1. Information technology. Personal identification. ISO-compliant driving licence. Part 4. Test methods
23/30475690 DC BS EN IEC 61935-4. Specification for the testing of balanced and coxial information technology cabling. Part 4. Installed balanced single pair cabling as specified in ISO/IEC 11801-1 and related standards
24/30488689 DC BS EN IEC 61935-4 Specification for the testing of balanced and coxial information technology cabling - Part 4: Installed balanced single pair cabling as specified in ISO/IEC 11801-1 and related standards

German Institute for Standardization, Double 85 test standard iec

DIN EN 61075:1994-03 Loran-C receivers for ships; minimum performance standards; methods of testing and required test results (IEC 61075:1991, modified); German version EN 61075:1993
DIN EN 60512-28-100:2013 Connectors for electronic equipment.Tests and measurements.Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g (IEC 60512-28-100:2013); German version EN 60512-28-100:2013
DIN EN 61300-2-46 Berichtigung 1:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat cyclic (IEC 61300-2-46:2006); German version EN 61300-2-46:2006, Corrigendum to DIN EN 61300-2-46:2007-03; (IEC-Cor. :2012 to
DIN EN 60870-5-6:2009 Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the EN 60870-5 companion standards (IEC 60870-5-6:2006); German version EN 60870-5-6:2009
DIN EN 60870-5-6:2009-11 Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the EN 60870-5 companion standards (IEC 60870-5-6:2006); German version EN 60870-5-6:2009
DIN EN IEC 61753-089-02:2022 Fibre optic interconnecting devices and passive components - Performance standard - Part 089-02: Non-connectorised single-mode bidirectional OTDR monitoring WWDM for categorie C - Indoor controlled environment (IEC 86B/4477/CDV:2021); German and English v
DIN EN 60512-23-3 Berichtigung 1:2012 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories (IEC 60512-23-3:2000); German version EN 60512-23-3:2001, Corrigendum to DI
DIN EN 60512-1-4 Berichtigung 1:2012 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof) (IEC 60512-1-4:1997); German version EN 60512-1-4:1997, Corrigend
DIN EN IEC 61300-2-5:2023-09 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion (IEC 61300-2-5:2022); German version EN IEC 61300-2-5:2022 / Note: DIN EN 61300-2-5 (2011-10) remains valid alongside this st...
DIN EN IEC 61300-2-18:2023-10 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat (IEC 61300-2-18:2023); German version EN IEC 61300-2-18:2023 / Note: DIN EN 61300-2-18 (2006-04) remains valid alongside th...
DIN IEC 60404-3 Berichtigung 1:2010 Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (IEC 60404-3:1992 + A1:2002 + A2:2009), Corrigendum to DIN IEC 60404-3:2010-05
DIN EN 61300-3-35 Berichtigung 1:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Fibre optic cylindrical connector endface visual and automated inspection (IEC 61300-3-35:2009); German version

Association Francaise de Normalisation, Double 85 test standard iec

NF EN 60870-5-6:2009 Telecontrol equipment and systems - Part 5-6: guidelines for testing compliance with accompanying standards IEC 60870-5
NF C93-471-1:2012 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor conditions
NF C46-956*NF EN 60870-5-6:2009 Telecontrol equipment and systems - Part 5-6 : guidelines for conformance testing for the IEC 60870-5 companion standards
NF C93-587-2*NF EN 61935-2:2018 Specification for the testing of balanced and coaxial information technology cabling - Part 2 : cords as specified in ISO/IEC 11801 and related standards
NF EN 61935-2:2018 Specification for testing symmetrical and coaxial information technology cabling - Part 2: cords as specified in ISO/IEC 11801 and associated standards
NF C46-050-2-4*NF EN 61326-2-4:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4 : particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and
NF C93-587-3*NF EN 61935-3:2010 Testing of balanced and coaxial information technology cabling - Part 3 : installed cabling as specified in EN 50173-4 and related standards

Society of Automotive Engineers (SAE), Double 85 test standard iec

SAE AS5127/1B-2009 Aerospace Standard Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds

European Committee for Electrotechnical Standardization（CENELEC）, Double 85 test standard iec

EN 60870-5-6:2009 Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the EN 60870-5 companion standards
EN 61926-1:2000 Design Automation - Part 1: Standard Test Language for All Systems - Common Abbreviated Test Language for All Systems (C/ATLAS)

IEC - International Electrotechnical Commission, Double 85 test standard iec

IEC 60512-6-2:2002 Connecteurs Pour Equipements Electroniques - Essais et Mesures - Partie 6-2: Essais de Contraintes Dynamiques - Essai 6b: Secousses (Edition 1.0; This Standard Along with 60512-6-1 Replaces IEC 60512-4)
IEC 60512-4-2:2002 Connecteurs pour Equipements Electroniques - Essais et Mesures - Partie 4-2: Essais de Contrainte Dielectrique - Essai 4b: Decharges Partielles (Edition 1.0; This Standard Along with IEC 60512-1-2@ 60512-2-1@ 60512-2-3@ 60512-2-6@ 60512-3-1@ and 60512-4-3
TS 60870-5-604-2016 Telecontrol equipment and systems – Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard (Edition 2.0)
TS 60870-5-604 (REDLINE + STANDARD)-2016 Telecontrol equipment and systems – Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard (Edition 2.0)
TS 60870-5-601-2006 Telecontrol equipment and systems – Part 5-601: Conformance test cases for the IEC 60870-5-101 companion standard (Edition 1.0)
TS 60870-5-604-2007 Telecontrol equipment and systems – Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard (Edition 1.0)
TS 60870-5-601-2015 Telecontrol equipment and systems - Part 5-601: Transmission protocols - Conformance test cases for the IEC 60870-5-101 companion standard (Edition 2.0)
IEC 60793-1-20:2001 Optical Fibres - Part 1-20: Measurement Methods and Test Procedures - Fibre Geometry (Edition 1.0; Together with the Other Standards in the IEC 60793-1-2X Series)

Canadian Standards Association (CSA), Double 85 test standard iec

CSA ISO/IEC 13673-02-CAN/CSA:2002 Information technology Document processing and related communication Conformance testing for Standard Generalized Markup Language (SGML) systems ISO/IEC 13673:2000

Danish Standards Foundation, Double 85 test standard iec

DS/IEC/TS 60870-5-601:2007 Telecontrol equipment and systems - Part 5-601: Conformance test cases for the IEC 60870-5-101 companion standard
DS/EN 61935-2:2010 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards
DS/IEC 885-3:1990 International Electrotechnical Commission IEC Publication No. 885-3 First edition 1988 Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
DS/IEC 332-2:1992 Tests on electric cables under fire conditions. Part 2: Test on a single small vertical insulated copper wire or cable

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Double 85 test standard iec

IEEE 2003 ERTA-1999 Information Technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX Standards (IEEE Computer Society Document; Corrections March 11@ 1999; International Standard ISO/IEC 1

(U.S.) Telecommunications Industries Association , Double 85 test standard iec

TIA-568-C.2-2-2014 Balanced Twisted-Pair Telecommunications Cabling and Components Standard, Addendum 2: Alternative Test Methodology for Category 6A Patch Cords (Addendum to TIA-568-C)

TIA - Telecommunications Industry Association, Double 85 test standard iec

TIA-568.2-C-2-2014 Balanced Twisted-Pair Telecommunications Cabling and Components Standard@ Addendum 2: Alternative Test Methodology for Category 6A Patch Cords (Addendum to TIA-568-C)

International Organization for Standardization (ISO), Double 85 test standard iec

ISO/FDIS 19238 Radiological protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics — The dicentric assay

ES-UNE, Double 85 test standard iec

UNE-EN 61935-2:2010 Specification for the testing of balanced and coaxial information technology cabling -- Part 2: Cords as specified in ISO/IEC 11801 and related standards (Endorsed by AENOR in October of 2010.)

AT-OVE/ON, Double 85 test standard iec

OVE EN IEC 61753-089-02:2021 Fibre optic interconnecting devices and passive components - Performance standard - Part 089-02: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Indoor controlled environment (IEC 86B/4477/CDV) (english version)

ZA-SANS, Double 85 test standard iec

SANS 61326-2-4:2009 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for