ZH
RU
ES
solid state
solid state, Total:498 items.
In the international standard classification, solid state involves: Electrical accessories, Electricity. Magnetism. Electrical and magnetic measurements, Galvanic cells and batteries, Lubricants, industrial oils and related products, Spices and condiments. Food additives, Capacitors, Semiconductor devices, Beverages, Tea. Coffee. Cocoa, Food products in general, Data storage devices, Optoelectronics. Laser equipment, Aircraft and space vehicles in general, Construction materials, Road engineering, Analytical chemistry, Protection against dangerous goods, Ventilators. Fans. Air-conditioners, Switchgear and controlgear, Thermodynamics and temperature measurements, Quantities and units, Fuel cells, Wastes, Fuels, Miscellaneous domestic and commercial equipment, Chipless working equipment, Medical equipment, Vocabularies, Lighting, Aerospace electric equipment and systems, Valves, Electronic display devices, Farming and forestry, Storage equipment, Telecommunication systems, Inks. Printing inks, Integrated circuits. Microelectronics, Agricultural machines, implements and equipment, Lamps and related equipment, Radiation measurements, Processes in the food industry, Products of the chemical industry, Raw materials for rubber and plastics, Audio, video and audiovisual engineering, Materials for aerospace construction, Environmental protection, Paper and board, Energy and heat transfer engineering in general, Protective equipment, Kitchen equipment, Radiation protection, Non-ferrous metals, Plastics, Installations in buildings, Shipbuilding and marine structures in general, Geology. Meteorology. Hydrology, Powder metallurgy, Particle size analysis. Sieving, Graphical symbols, Surface treatment and coating, Insulating materials, Fertilizers, Animal feeding stuffs, Measurement of volume, mass, density, viscosity, Hydraulic energy engineering, Space systems and operations, Technical product documentation, Elements of buildings, Protection of and in buildings, Radiocommunications, Electronic components in general, Rubber and plastics products, Lubrication systems, Piezoelectric and dielectric devices, Milk and milk products, Organic chemicals, Waxes, bituminous materials and other petroleum products, Commercial vehicles, Manufacturing forming processes, Wind turbine systems and other alternative sources of energy, Insulation, Paints and varnishes, Air quality, Inorganic chemicals.
U.S. Military Regulations and Norms, solid state
- ARMY UFGS-06 61 16-2009 SOLID POLYMER (SOLID SURFACING) FABRICATIONS
- ARMY MIL-DTL-62187 C-2009 REGULATOR, 650 AMP, SOLID STATE
- ARMY MIL-PRF-62071C-1995 POWER SUPPLY: HIGH VOLTAGE, SOLID STATE, 24 VOLTS, DIRECT CURRENT
- ARMY P-D-410 C INT AMD 1-1983 DISHWASHING COMPOUND, HAND (SYNTHETIC DETERGENT, SOLID AND LIQUID FORM)
- ARMY P-D-410 C-1977 DISHWASHING COMPOUND, HAND (SYNTHETIC DETERGENT, SOLID AND LIQUID FORM)
- ARMY MIL-PRF-46010 G-2008 LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE ?S-1738
- ARMY MIL-DTL-62069 G (1)-2011 CONTROL, DIRECTIONAL SIGNAL LIGHT, AUTOMOTIVE: 24 VOLT DC, SOLID STATE
- ARMY MIL-DTL-62069 G-2010 CONTROL, DIRECTIONAL SIGNAL LIGHT, AUTOMOTIVE: 24 VOLT DC, SOLID STATE
Electronic Components, Assemblies and Materials Association, solid state
ECIA - Electronic Components Industry Association, solid state
British Standards Institution (BSI), solid state
- BS EN 62314:2007 Solid-state relays
- BS EN 62314:2006 Solid-state relays
- 19/30398399 DC BS EN 62314. Solid-state relays
- 18/30376564 DC BS EN 62314. Solid-state relays
- 18/30388399 DC BS EN 62314. Solid-state relays
- BS 1704:1985 Specification for solid-stem general purpose thermometers
- 20/30412414 DC BS EN IEC 62314. Solid-state relays
- BS 7952:2001 Specification for chemical firelighters in solid form used for the ignition of solid fuels in residential heating and cooking appliances
- BS EN 61747-1:2000 Liquid crystal and solid-state display devices - Generic specification
- BS EN 61747-1:1998 Liquid crystal and solid-state display devices. Generic specification
- BS IEC 61747-1:1998 Liquid crystal and solid state display devices. Generic specification
- BS CECC 30300:1992 Harmonized system of quality assessment for electronic components. Sectional specification: aluminium electrolytic capacitors with solid and non-solid electrolyte
- BS ISO 8816:1993+A1:2012 Aircraft. Solid-state remote power controllers. General requirements
- BS EN 14664:2004 Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate, solid
- BS EN 14665:2004 Thermal spraying-Thermally sprayed coatings-Symbolic representation on drawings
- BS QC 300300:1998 Harmonized system of quality assessment for electronic components - Fixed capacitors for use in electronic equipment - Sectional specification: aluminium electrolytic capacitors with solid and non-solid electrolyte
- BS ISO 24065:2023 Aerospace. High-power solid-state power controller. General performance requirements
- BS 5424-2:1987 Low-voltage controlgear - Specification for semiconductor contactors (solid state contactors)
- BS EN 61747-2:1999 Liquid crystal and solid-state display devices. Liquid crystal display modules. Sectional specification
- BS EN 61747-3:2000 Liquid crystal and solid-state display devices - Sectional specification for liquid crystal display (LCD) cells
- BS ISO 19670:2017 Fertilizers and soil conditioners. Solid urea aldehyde slow release fertilizer. General requirements
- BS IEC 61747-3-1:1998 Liquid crystal and solid state display devices. Liquid crystal display (LCD) cells. Blank detail specification
- BS EN 61747-3-1:2000 Liquid crystal and solid-state display devices - Liquid crystal display (LCD) cells - Blank detail specification
- BS EN 61747-3-1:2007 Liquid crystal display devices. Liquid crystal display (LCD) cells. Blank detail specification
- BS EN 61747-5:1998 Liquid crystal and solid-state display devices. Environmental, endurance and mechanical test methods
- BS PD IEC/TS 62332-2:2014 Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components. Simplified test
- BS EN 61747-6:2004 Liquid crystal and solid-state display devices - Measuring methods for liquid crystal modules - Transmissive type
International Electrotechnical Commission (IEC), solid state
- IEC 62314:2006 Solid-state relays
- IEC 62314:2022 Solid-state relays - Safety requirements
- IEC 60384-4/AMD1:1992 Fixed capacitors for use in electronic equipment; part 4: sectional specification: aluminium electrolytic capacitors with solid and non-solid electrolyte; amendment 1
- IEC 61747-1:2003 Liquid crystal and solid-state display devices - Part 1: Generic specification
- IEC 61747-1:1998+AMD1:2003 CSV Liquid crystal and solid-state display devices - Part 1: Generic specification
- IEC 61747-1:1998 Liquid crystal and solid-state display devices - Part 1: Generic specification
- IEC PAS 62190:2000 Moisture/reflow sensitivity classification for nonhermetic solid state surface mount devices
- IEC 61747-1:1998/AMD1:2003 Liquid crystal and solid-state display devices - Part 1: Generic specification; Amendment 1
- IEC 61747-3:1998 Liquid crystal and solid state display devices - Part 3: Sectional specification for liquid crystal display (LCD) cells
- IEC 60158-2:1982 Low-voltage controlgear. Part 2 : Semiconductor contactors (solid state contactors)
- IEC 61747-2:1998 Liquid crystal and solid-state display devices - Part 2: Liquid crystal display modules - Sectional specification
Association Francaise de Normalisation, solid state
Institute of Electrical and Electronics Engineers (IEEE), solid state
German Institute for Standardization, solid state
- DIN EN 62314:2007 Solid-state relays (IEC 62314:2006); German version EN 62314:2006
- DIN 66137-1:2019-03 Determination of solid state density - Part 1: Principles
- DIN 1310:1984-02 Composition of (gaseous, liquid and solid) mixtures; concepts, symbols
- DIN 42111-2:1980 Solid state switches; dimensions, ratings, requirements, tests, type A
- DIN EN 61747-1:2003 Liquid crystal and solid-state display devices - Part 1: Generic specification (IEC 61747-1:1998 + A1:2003); German version EN 61747-1:1999 + A1:2003
- DIN 66137-2:2019-03 Determination of solid state density - Part 2: Gaspycnometry
- DIN 66137-3:2019-03 Determination of solid state density - Part 3: Gas buoyancy method
- DIN EN 61747-1:2003-12 Liquid crystal and solid-state display devices - Part 1: Generic specification (IEC 61747-1:1998 + A1:2003); German version EN 61747-1:1999 + A1:2003 / Note: DIN EN 61747-1 (2000-02) remains valid alongside this standard until 2006-04-01.*To be replace...
- DIN 25483:2023-07 Methods of environmental monitoring using integrating solid-state dosimeters
- DIN EN 61747-2:1999-07 Liquid crystal and solid-state display devices - Part 2: Liquid crystal display modules; sectional specification (IEC 61747-2:1998); German version EN 61747-2:1999 / Note: To be replaced by DIN EN 61747-2 (2013-04).
- DIN 42111-1:1980 Solid state switches; definitions, climatic test categories, measuring methods and testing procedures
- DIN EN 61747-3:2007 Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells - Sectional specification (IEC 61747-3:2006); German version EN 61747-3:2006
- DIN 51938:1994 Testing of carbon materials; determination of particle size distribution by sieving; solid matters
Danish Standards Foundation, solid state
European Committee for Electrotechnical Standardization（CENELEC）, solid state
- EN 62314:2006 Solid-state relays
- EN 61747-2:1999 Liquid crystal and solid-state display devices Part 2: Liquid crystal display modules Sectional specification
Gansu Provincial Standard of the People's Republic of China, solid state
未注明发布机构, solid state
RO-ASRO, solid state
- STAS 35-1981 CRUDE, OIL LIQUID SEMI-SOLID AND SOLID PETROLEUM PRODUCTS Detcrmination or density
- STAS 3228-1983 Solid fueles COAl.S Grain size dctermination
- STAS 6477-1990 Soild fuels. Pit coal. Classification system and statistical grouping
- STAS 737/16-1984 International System of Units (SI) UNITS OF SOLID STATE PHYSICS
- STAS 6107-1981 SOLID ELECTRICAL INSULATING MATERIALS Methods of test for volume and sur- face resistivity and of insution resistance
- SR 6397-1995 Metallic cookers burning with solid fuels for household use General technical requirements for quality
Group Standards of the People's Republic of China, solid state
- T/SPSTS 019-2021 Performance requirements and test methods of solid-state electrolytes for solid-state lithium batteries——Inorganic oxide solid-state electrolyte
- T/JGC 0004-2022 semi-solid seasoning
- T/SPSTS 020-2021 Performance requirements and test methods of solid-state electrolytes for solid-state lithium batteries——Polymer and composite solid-state electrolyte
- T/5115YBAPS 028-2021 Yibin Traditional Lu Jiu
- T/AHFIA 064-2022 Solid state tea-type liquor
- T/HBJ 0003-2022 pure grain solid-state fermented baijiu
- T/JLPFA 0001.1-2022 Jilin Pure Grain Solid Liquor
- T/MSAH 003-2022 Semi-solid compound seasoning
- T/SPFA 002-2023
- T/JGXH 008-2020 Diode pump solid state laser
- T/JSQA 027-2020 Anode foil for solid state capacitors
- T/CEEIA 603-2022 Low-voltage solid state circuit-breaker for ships
- T/5115YBAPS 047-2023 Danliang Xiaoqu solid-state liquor
- T/CBJ 2105-2019 Crude traditional Feng xiang xing Baijiu
- T/CASME 150-2022 Technical requirements for solid state energy storage system
- T/BJJSJ 0001-2019 Si Chuan strong-flavour Crude Spirits with pure grain by traditional fermentation
- T/ZBSQN 002-2023 LaNi5 hydride solid state hydrogen storage system equipment
- T/CCSA 266-2019 Test specification for SSD of data centers
- T/AHFIA 066-2022 Technical regulations for the production of solid-state tea-type liquor
- T/GDES 10004-2017 Technical requirements for ammonia solid storage and delivery system
- T/GDC 5-2019 General specifications for semi-solid aluminum alloy die castings
- T/CPSS 1003-2020 Technical specification for solid state transfer switch site acceptance test
- T/SHJNXH 0008-2021 Technical requirements for magnesium-based hydride solid-state hydrogen storage and transportation system
- T/CQJX 2-2022 Chongqing Xiaoqu Solid State Liquor Production Technical Specifications
- T/CESA 9281-2020 Information technology application innovation—General technical specification for solid state disks
- T/5115YBAPS 001-2019 Specifications for traditional solid-state brewing process of Wuliang Luzhou-flavor liquor
- T/SDEPI 037-2023 Technical code for carbon-source utilization of solid-state fermentation Baijiu industry wastewater
- T/CSTM 00751-2022 Measurement of dielectric properties of solid-state dielectric materials in microwave frequency range—The closed cavity method
- T/CESA 1171-2021 Information technology — Solid state disk technical specification for video surveillance storage application
- T/CESA 1233-2022 Application performance test method of solid state disk for server based on typical server application scenarios
- T/GDGM 0007-2019 Green Design Product Evaluation Technical Specifications for Aluminum Alloy Semi-Solid Die Castings
- T/CEC 678-2022 Safety requirements and test methods for solid-state lithium-ion batteries for power storage
- T/GDCKCJH 026-2020 Performance index and test methods for polymer quasi-solid-state electrolyte power battery
- T/SDHCIA 012-2021 Online solid polymer electrochemical total volatile organic compounds（TVOC）monitor
- T/CTMA 027.1-2021 Shelf life for tea products—Part 1: Instant tea in solid form, matcha and tea concentrated in liquid
CZ-CSN, solid state
Society of Automotive Engineers (SAE), solid state
- SAE AS1701D-2014 Lubricant, Solid Film
- SAE AS4805-2007 Solid State Power Controller, General Standard for
- SAE AMS3084B-1996 Lubricant, Solid Film Minimal Outgassing
- SAE AMS3571-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type
- SAE AS5272A-2005 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting Procurement Specification
- SAE AMS3573B-1994 Resin, Polyurethane (EU) Casting Polyether-Type, Flexible, Solid Low-Temperature Resistant, 80 to 90
United States Navy, solid state
- NAVY MIL-PRF-24711 B-2008 SWITCH, PROXIMITY, SOLID-STATE
- NAVY UFGS-26 35 43-2011 400-HERTZ (HZ) SOLID STATE FREQUENCY CONVERTER
- NAVY MIL-F-29000-1973 FREQUENCY CONVERTER: SOLID STATE, 5 KVA, WITH TRANSIT CASE
- NAVY MIL-F-24638 VALID NOTICE 1-1989 FREQUENCY CHANGER, SOLID STATE, AIR COOLED (NAVAL SHIPBOARD)
- NAVY MIL-F-24638-1984 FREQUENCY CHANGER, SOLID STATE, AIR COOLED (NAVAL SHIPBOARD)
- NAVY MIL-F-29001 A (4)-1977 FREQUENCY CONVERTER: SOLID STATE, 12.5 KVA (10 KW), WITH TRANSIT COVER
- NAVY MIL-F-29001 A-1974 FREQUENCY CONVERTER: SOLID STATE, 12.5 KVA (10 KW), WITH TRANSIT COVER
Professional Standard - Agriculture, solid state
Professional Standard - Machinery, solid state
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, solid state
中华全国供销合作总社, solid state
工业和信息化部, solid state
RU-GOST R, solid state
- GOST R 51846-2001 Solid-state lasers and solid-state laser heads for wide application devices. General specifications
- GOST 23982-1985 Equipment for distributing solid organic fertilizers. General specifications
- GOST 28718-2016 Agricultural machinery. Machine for introduction of solid organic fertilizers. Test methods
- GOST 6433.1-1971 Solid electrical insulating materials. Environmental conditions at preparation of samples and testing
- GOST R 52126-2003 Radioactive waste. Long time leach testing of solidified radioactive waste forms
- GOST 6433.2-1971 Solid electrical insulating materials. Methods for evaluation of electrical resistance at d. c. voltages
- GOST 10315-1975 Solid electrical insulating materials. Methods for the determination of moisture resistance and water resistance
- GOST 32629-2014 Testing of chemicals that are hazardous to the environment. Fat solubility of solid and liquid substances. Flask method
- GOST 10345.2-1978 Solid electroinsulating materials. Method for the determination of arc resistance of direct current of low voltage
Society of Motion Picture and Television Engineers (SMPTE), solid state
(U.S.) Ford Automotive Standards, solid state
Military Standards (MIL-STD), solid state
HU-MSZT, solid state
IN-BIS, solid state
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., solid state
- IEEE C12.16-1991 Electricity Metering Solid-State Electricity Meters
- IEEE 216-1960 STANDARDS ON SOLID STATE DEVICES: DEFINITIONS OF SEMICONDUCTOR TERMS
- IEEE C12.15-1990 Electricity Metering Solid-State Demand Registers for Electromechanical Watthour Meters
- IEEE C12.17-1991 Electricity Metering Cartridge-Type Solid- State Pulse Recorders for Electricity Metering
Defense Logistics Agency, solid state
- DLA MS25205 REV G VALID NOTICE 1-2011 Flasher, Solid State, Aircraft Light
- DLA MIL-PRF-28750 D (3)-2002 RELAYS, SOLID-STATE, SEALED, GENERAL SPECIFICATION FOR
- DLA MIL-PRF-28750 D SUPP 1-1999 RELAYS, SOLID-STATE, SEALED, GENERAL SPECIFICATION FOR
- DLA MIL-PRF-28750 D-1999 RELAYS, SOLID-STATE, SEALED, GENERAL SPECIFICATION FOR
- DLA MIL-PRF-28750 E-2008 RELAYS, SOLID STATE, GENERAL SPECIFICATION FOR
- DLA MIL-PRF-28750 E SUPP 1-2009 RELAYS, SOLID-STATE, GENERAL SPECIFICATION FOR
- DLA QPL-28750-QPD-2010 Relays, Solid State, General Specification for
- DLA QPL-28750-2011 Relays, Solid State, General Specification for
- DLA QPL-28750-2012 Relays, Solid State, General Specification for
- DLA QPL-28750-2013 Relays, Solid State, General Specification for
- DLA QPL-28750-37 NOTICE 1-2008 Relays, Solid State, General Specification for
- DLA MS24577 REV F VALID NOTICE 1-2011 Flasher, Solid State, Aircraft Navigational Light
- DLA MIL-DTL-83739/1 C-2009 SWITCH, ANTENNA, RADIO FREQUENCY, SOLID-STATE, SA-1474A/A
- DLA MIL-DTL-83739/1 D-2013 SWITCH, ANTENNA, RADIO FREQUENCY, SOLID-STATE, SA-1474A/A
- DLA MIL-DTL-83739 C (1)-2007 SWITCHES, ANTENNA, RADIO FREQUENCY, SOLID-STATE, GENERAL SPECIFICATION FOR
- DLA MIL-DTL-28875 B-2006 AMPLIFIERS, RADIO-FREQUENCY AND MICROWAVE, SOLID- STATE, GENERAL SPECIFICATION FOR
- DLA MIL-F-26301 F-2003 FLASHER, SOLID STATE, AIRCRAFT NAVIGATIONAL LIGHT, GENERAL SPECIFICATION FOR
- DLA MIL-PRF-83726 D-2008 RELAYS, HYBRID AND SOLID STATE, TIME DELAY, GENERAL SPECIFICATION FOR
- DLA MIL-PRF-83726 E SUPP 1-2011 RELAYS, HYBRID AND SOLID STATE, TIME DELAY, GENERAL SPECIFICATION FOR
- DLA MIL-PRF-83726 E-2011 RELAYS, HYBRID AND SOLID STATE, TIME DELAY, GENERAL SPECIFICATION FOR
- DLA MIL-DTL-28875/10 B-2010 AMPLIFIERS, RADIO-FREQUENCY AND MICROWAVE, SOLID-STATE, WIDEBAND, TO CONFIGURATION
- DLA MIL-DTL-28875 C-2012 AMPLIFIERS, RADIO-FREQUENCY AND MICROWAVE, SOLID-STATE, GENERAL SPECIFICATION FOR
- DLA MIL-DTL-28875 C SUPP 1-2012 AMPLIFIERS, RADIO-FREQUENCY AND MICROWAVE, SOLID-STATE, GENERAL SPECIFICATION FOR
- DLA MIL-DTL-83739 D-2012 SWITCHES, ANTENNA, RADIO FREQUENCY, SOLID-STATE, GENERAL SPECIFICATION FOR
- DLA QPL-83726-2011 Relays, Hybrid and Solid State, Time Delay, General Specification for
- DLA QPL-83726-2013 Relays, Hybrid and Solid State, Time Delay, General Specification for
- DLA MIL-DTL-28875/12 A NOTICE 2-2010 AMPLIFIERS, RADIO-FREQUENCY AND MICROWAVE, SOLID-STATE, WIDEBAND, LOW PROFILE, TO CONFIGURATION
- DLA MIL-DTL-28875/12A-2000 AMPLIFIERS, RADIO-FREQUENCY AND MICROWAVE, SOLID-STATE, WIDEBAND, LOW PROFILE, TO CONFIGURATION
- DLA SMD-5962-95605-1995 MICROCIRCUIT, LINEAR, 28 VOLT, SOLID STATE POWER CONTROLLER, HYBRID
- DLA MIL-PRF-22885/9 L VALID NOTICE 2-2011 Switch, Push Button, Illuminated, 4-Lamp, Solid Mount, (Modular Constructed)
- DLA MIL-DTL-28875/5 A NOTICE 2-2010 AMPLIFIERS, RADIO-FREQUENCY AND MICROWAVE, SOLID-STATE, LOW NOISE, WIDEBAND, TO CONFIGURATION
- DLA MIL-DTL-28875/5A-2000 AMPLIFIERS, RADIO-FREQUENCY AND MICROWAVE, SOLID-STATE, LOW NOISE, WIDEBAND, TO CONFIGURATION
- DLA MIL-DTL-28875/6 B-2010 AMPLIFIERS, RADIO-FREQUENCY AND MICROWAVE, SOLID-STATE, LOW NOISE, WIDEBAND, COAXIAL CONFIGURATION
- DLA DSCC-DWG-86031 REV J-2005 RELAY, SOLID STATE, OPTICALLY ISOLATED, 10 AMPERE LOAD AT 250 V AC, DC INPUT CONTROL
- DLA MIL-R-83726/22 F-2008 RELAYS, SOLID STATE, REPEAT CYCLE TIMER, TYPE IV, CLASS C, SPST, 250 MILLIAMPERES
Lithuanian Standards Office , solid state
AENOR, solid state
- UNE-EN 62314:2007 Solid-state relays (IEC 62314:2006).
- UNE 20543-15/1M:1995 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT. SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE.
- UNE 20543-15:1985 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT. SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
- UNE-EN ISO 80000-12:2014 Quantities and units - Part 12: Solid state physics (ISO 80000-12:2009)
Inner Mongolia Provincial Food Standard of the People's Republic of China, solid state
American Society for Testing and Materials (ASTM), solid state
- ASTM D3289-97 Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
- ASTM D3289-03 Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
- ASTM D3289-08 Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
- ASTM F2406-04 Standard Practice for Determining Yield of Solid Ink Sticks
- ASTM F2406-04(2012) Standard Practice for Determining Yield of Solid Ink Sticks
- ASTM D2510-94(2006) Standard Test Method for Adhesion of Solid Film Lubricants
- ASTM F1755M-96 Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)
- ASTM F1755M-96(2002) Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)
- ASTM F1755M-96(2007) Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric]
- ASTM D2510-94(2012) Standard Test Method for Adhesion of Solid Film Lubricants
- ASTM F1755M-96(2018) Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)
- ASTM E3277-23a Standard Test Method for Determining the Liquid or Solid State of a Material by Rheometry
- ASTM D2649-04 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
- ASTM E680-79(2005) Standard Test Method for Drop Weight Impact Sensitivity Of Solid-Phase Hazardous Materials
- ASTM D2649-04(2009) Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
- ASTM D70-09e1 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
- ASTM F1755M-96(2012)e1 Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric]
- ASTM D2649-04(2014) Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
- ASTM D2511-93(2003) Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants
- ASTM E1423-99 Standard Practice for Determining the Steady State Thermal Transmittance of Fenestration Systems
- ASTM D2457-97 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
- ASTM D2981-94(2003) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
- ASTM D70-17 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
- ASTM UOP1025-18 Density of Viscous Liquids and Semi-Solid Hydrocarbons by Nitrogen Displacement
- ASTM D2457-08 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
- ASTM D2457-08e1 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
- ASTM D2457-13 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
- ASTM D2511-93(2014) Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants
- ASTM D2981-94(2014) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
- ASTM D2457-03 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
- ASTM D2320-98(2003) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
- ASTM D2320-98 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
- ASTM D2320-98(2008) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
- ASTM D2320-98(2012) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
- ASTM D2336-99 Standard Guide for Specifying Factory Applied Wood Coatings
- ASTM E3277-23 Standard Test Method for Determining the Liquid or Solid State of a Material by Rheometry
- ASTM D2981-94(2009) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
Building Officials and Code Administrators International(U.S.), solid state
American Gear Manufacturers Association, solid state
- AGMA 94FTM8-1994 Reference Point, Mesh Stiffness and Dynamic Behavior of Solid, Semi-Solid and Thin Rimmed Spur Gears
Underwriters Laboratories (UL), solid state
- UL 1917-2013 UL Standard for Safety Solid-State Fan Speed Controls (Fourth Edition; Reprint with Revisions Through and Including October 4@ 2017)
- UL 244A-2003 UL Standard for Safety Solid-State Controls for Appliances
- UL 2367-2009 UL Standard for Safety Solid State Overcurrent Protectors (First Edition; Reprint with revisions through and including May 2@ 2014)
- UL 2367 BULLETIN-2008 OUTLINE OF INVESTIGATION FOR SOLID STATE OVERCURRENT PROTECTORS
- UL 1472 BULLETIN-2005 UL Standard for Safety Solid-State Dimming Controls
- UL 1472 BULLETIN-2006 UL Standard for Safety Solid-State Dimming Controls
- UL 1008S BULLETIN-2014 UL Standard for safety Solid-State Transfer Switches
- UL 244A BULLETIN-2008 UL Standard for Safety Solid-State Controls for Appliances
- UL 1472 BULLETIN-2022 UL Standard for Safety Solid-State Dimming Controls
- UL 1472-2015 UL Standard for Safety Solid-State Dimming Controls (Second Edition)
- UL 1917 BULLETIN-2002 UL Standard for Safety Solid-State Fan Speed Controls
- UL 2367 BULLETIN-2018 UL Standard for Safety Solid State Overcurrent Protectors
- UL 1917 BULLETIN-2006 UL Standard for Safety Solid-State Fan Speed Controls
- UL SUBJECT 2367-2004 OUTLINE OF INVESTIGATION FOR SOLID STATE OVERCURRENT PROTECTORS (Issue 1)
- UL 858A-1989 Safety-related solid-state controls for household electric ranges
- UL 858A-1995 Safety-related solid-state controls for household electric ranges
- UL 1008S-2012 UL Standard for safety Solid-State Transfer Switches (First Edition)
- UL 858A BULLETIN-2002 UL Standard for Safety Safety-Related Solid-State Controls for Household Electric Ranges
- UL 858A BULLETIN-2006 UL Standard for Safety Safety-Related Solid-State Controls for Household Electric Ranges
- UL 991 BULLETIN-2000 UL Standard for Safety Tests for Safety-Related Controls Employing Solid-State Devices
Beijing Provincial Standard of the People's Republic of China, solid state
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, solid state
Canadian Standards Association (CSA), solid state
US-FCR, solid state
Professional Standard - Electron, solid state
- SJ/T 11790-2021 Solid State Disk Energy Consumption Test Method
- SJ 20611-1996 Microwave circuits.Measuring methods for solid noise sources
- SJ 20682-1998 General specification for Lx band Solid-state pulse power modules
- SJ/T 10700-1996 General specification for solid state transmitter in LORAN-C navigation system
- SJ 20618-1997 General specification for all-solid-state short-wave broadband transmitters for submarines
- SJ 20676-1998 General specification for wideband solid power amplifier module in CCM
- SJ 20270-1993 Verification regulation of model YH1301 full solid state microwave sweep
- SJ 20675-1998 Series and products of microwave circuits--Products of microwave solid state noise sources series
Taiwan Provincial Standard of the People's Republic of China, solid state
BE-NBN, solid state
Professional Standard - Electricity, solid state
- DL/T 1226-2013 Technical specification for solid state transfer switch
National Metrological Verification Regulations of the People's Republic of China, solid state
CN-QIYE, solid state
Professional Standard - Petrochemical Industry, solid state
Anhui Provincial Standard of the People's Republic of China, solid state
- DB34/T 2264-2014 Analytical method of solid-state fermented fermented grains
- DB34/T 803-2008 Technical regulations for the production of solid-state strains
- DB34/T 2561-2015 Near-infrared method for rapid determination of routine indicators of solid-state fermented grains
- DB34/T 1728-2012 Analytical methods for conventional indicators in liquor solid-state fermentation yellow pulp water
Military Standard of the People's Republic of China-General Armament Department, solid state
- GJB 9643-2019 General Specification for Military Solid State Drives
- GJB 10232-2021 Specification for solid-state memory for use in spacecraft
- GJB/J 2907-1997 Broadband solid-state noise source calibration procedures
- GJB 2907A-2020 Broadband solid-state noise source calibration procedures
- GJB 2212-1994 Standard verification procedures for solid-state DC voltage
- GJB 5847-2006 General specification for radio-frequency and microwave solid-state amplifiers
- GJB 7084-2010 General specification for RF solid state power amplifier model
- GJB 10196-2021 Accelerated life test method for solid-state microwave power devices
- GJB 4979-2003 Specification for modules for solid-state modulators and high-voltage power supplies for military radars
U.S. Air Force, solid state
Electronic Components, Assemblies and Materials Association, solid state
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, solid state
国家市场监督管理总局、中国国家标准化管理委员会, solid state
- GB/T 36355-2018 Information technology—Test method of solid state disk
- GB/T 36512-2018 General requirements for solid-state remote power controllers of aircraft
- GB/T 40809-2021 Casting aluminum alloys—Process specification for semisolid rheo-diecasting forming
American National Standards Institute （ANSI), solid state
NEMA - National Electrical Manufacturers Association, solid state
- NEMA C78.377-2017 Electric Lamps — Specifications for the Chromaticity of Solid-State Lighting Products
- NEMA C78.377-2015 Electric Lamps - Specifications for the Chromaticity of Solid-state Lighting Products
- NEMA SSL 7A-2013 Phase Cut Dimming for Solid State Lighting: Basic Compatibility
- NEMA EI 25-1984 CARTRIDGE TYPE SOLID- STATE PULSE RECORDERS FOR ELECTRICITY METERS (WITHDRAWN)
- NEMA ANSLG C78.377-2011 American National Standard for electric lamps— Specifications for the Chromaticity of Solid State Lighting Products
- NEMA C136.42-2019 For Roadway and Area Lighting Equipment— Solid State Lighting Retrofit Kits
GB-REG, solid state
IET - Institution of Engineering and Technology, solid state
AT-OVE/ON, solid state
SAE - SAE International, solid state
Jiangsu Provincial Standard of the People's Republic of China, solid state
Sichuan Provincial Standard of the People's Republic of China, solid state
- DB51/T 390-2006 Technical requirements for solid excipient fermented bean curd
- DB51/T 394-2006 Technical requirements for semi-solid compound seasoning
Xinjiang Provincial Food Standard of the People's Republic of China, solid state
SE-SIS, solid state
YU-JUS, solid state
- JUS N.A5.011-1983 Measurement of electrical resistance of solid insulating materials
- JUS N.A5.005-1979 Standard conditions for testirrg ofsolid insukting materiak
- JUS M.E6.110-1987 Boilers forcentra! heating. Solid fules boi/eri. Construction and qualiiy reguirements
Korean Agency for Technology and Standards (KATS), solid state
ISA - International Society of Automation, solid state
Professional Standard - Commodity Inspection, solid state
- SN/T 2879-2011 Determination of fat solubility of solid and liquid substances
Professional Standard - Aviation, solid state
- HB 20101-2012 General specification for solid state power controllers
Professional Standard - Business, solid state
- SB/T 10311-1999 Technical regulations of soy sauce with low-salt and solid state fermentation
Illuminating Engineering Society of North America, solid state
- IESNA LM-79-2008 Electrical and Photometric Measurements of Solid-State Lighting Products
International Organization for Standardization (ISO), solid state
- ISO 124:2008 Latex, rubber - Determination of total solids content
- ISO 124:2014 Latex, rubber - Determination of total solids content
- ISO 8816:1993 Aircraft; solid-state remote power controllers; general requirements
- ISO 27027:2008 Aerospace - Solid-state remote power controllers - General performance requirements
- ISO 8816:1993/Amd 1:2012 Aircraft — Solid-state remote power controllers — General requirements — Amendment 1
- ISO 27027:2014 Aerospace - Solid-state remote power controllers - General performance requirements
- ISO 19670:2017 Fertilizers and soil conditioners - Solid urea aldehyde slow release fertilizer - General requirements
- ISO/PRF 24065:2023 Aerospace — High power solid state power controller — General performance requirements
- ISO 24065:2023 Aerospace — High power solid state power controller — General performance requirements
- ISO 124:1997/Amd 1:2006 Latex, rubber - Determination of total solids content; Amendment 1: Precision data
National Electrical Manufacturers Association（NEMA), solid state
- NEMA SSL 7A-2015 Phase-Cut Dimming for Solid State Lighting: Basic Compatibility
- NEMA ICS 1.1-1984 Safety Guidelines for the Application, Installation, and Maintenance of Solid State Control
- NEMA ANSLG C78.377-2008 American National Standard for electric lamps?Specifications for the Chromaticity of Solid State Lighting Products
Japanese Industrial Standards Committee (JISC), solid state
- JIS Z 4416:2005 Solid state nuclear track dosemeter for personal neutron monitoring
- JIS C 5142:1991 Fixed tantalum electrolytic capacitors with solid electrolyte for use in electronic equipment
- JIS C 5141:1991 Fixed aluminium electrolytic capacitors with non-solid electrolyte for use in electronic equipment
- JIS C 5143:1991 Fixed tantalum electrolytic chip capacitors with solid electrolyte for use in electronic equipment
- JIS C 2135:2011 Dry, solid insulating materials.Resistance test to high-voltage low-current arc discharges
Fujian Provincial Standard of the People's Republic of China, solid state
- DB35/ 1131-2011 Energy consumption limit per unit product of solid-state liquor raw liquor
- DB35/ 1132-2011 Energy consumption limit per unit product of semi-solid liquor raw liquor
Qinghai Provincial Food Standard of the People's Republic of China, solid state
The American Road & Transportation Builders Association, solid state
- AASHTO T 228-2009 Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials
- AASHTO M 249-2008 Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form)
- AASHTO M 249-1998 Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form)
Professional Standard - Water Conservancy, solid state
- SL 149-2013 General specification of solid state logger for hydrologic data
- SL/T 149-1995 General specification for hydrologic data solid storage collection system
AASHTO - American Association of State Highway and Transportation Officials, solid state
- T 228-2009 Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials
- T 228-2006 Standard Method of Test for Specific Gravity of Semi-Solid Bituminous Materials
- T228-1994 Standard Specification for Specific Gravity of Semi-Solid Bituminous Materials (Nineteenth Edition; D70-82(1990))
Inner Mongolia Provincial Standard of the People's Republic of China, solid state
- DB15/T 2816-2022 Technical regulations for corn husk solid-state fermentation bacterial protein feed
NATO - North Atlantic Treaty Organization, solid state
- STANAG 4334-1992 Electrical Power Conditioners Solid State General Purpose for Interoperability (ED 1 AMD 0)
ES-UNE, solid state
- UNE-EN 61747-1:1999 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES. PART 1: GENERIC SPECIFICATION. (Endorsed by AENOR in November of 1999.)
- UNE-EN 61747-1:1999/A1:2003 Liquid crystal and solid-state display devices -- Part 1: Generic specification (Endorsed by AENOR in July of 2003.)
KR-KS, solid state
国家能源局, solid state
- NB/T 42100-2016 Solid-state composite switch for switching high-voltage parallel capacitor banks
European Committee for Standardization (CEN), solid state
- EN ISO 13982-1:2004 Protective clothing for use against solid particulate chemicals - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulate chemicals (type 5 clothing) (ISO 13982-1:2004)
- EN 16603-35-02:2014 Space engineering - Solid propulsion for spacecrafts and launchers
- HD 419.2 S1-1987 Low-voltage controlgear; part 2: semiconductor contactors (solid state contactors)
National Fire Protection Association (NFPA), solid state
- NFPA 430-2004 Code for the Storage of Liquid and Solid Oxidizers Effective Date: 8/5/2004
ES-AENOR, solid state
European Standard for Electrical and Electronic Components, solid state
AT-ON, solid state
ESDU - Engineering Sciences Data Unit, solid state
- ESDU 68023-1978 Thermal conductivity@ viscosity@ heat capacity@ density and Prandtl number of solid@ liquid and gaseous heavy water.
Institute of Interconnecting and Packaging Electronic Circuits (IPC), solid state
IPC - Association Connecting Electronics Industries, solid state
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., solid state
- ASHRAE 3644-1993 Measurements of Electrical Power Inputs to Variable-Speed Motors and Their Solid-State Power Converters