ZH
RU
ES
Flame Retardant Instruments
Flame Retardant Instruments, Total:236 items.
In the international standard classification, Flame Retardant Instruments involves: Protection against fire, Electrical accessories, Noise with respect to human beings, Non-destructive testing, Resistors, Protective equipment, Acoustics and acoustic measurements, On-board equipment and instruments, Audio, video and audiovisual engineering, Thermodynamics and temperature measurements, Burners. Boilers, Fasteners, Electricity. Magnetism. Electrical and magnetic measurements, Internal combustion engines for road vehicles, Mining equipment, Power stations in general, Geology. Meteorology. Hydrology, Air quality, Internal combustion engines, Diagnostic, maintenance and test equipment, Plastics, Fuels, Protection of and in buildings, Nuclear energy engineering, Alarm and warning systems, Power transmission and distribution networks, Transformers. Reactors, Rubber, Electrical equipment for working in special conditions, Coals, Cycles, Rubber and plastics products, Analytical chemistry, Radiation protection, Radiation measurements, Aerospace electric equipment and systems, Fluid storage devices, Electrical wires and cables, Domestic, commercial and industrial heating appliances, Linear and angular measurements, Petroleum, petroleum products and natural gas handling equipment, Electromechanical components for electronic and telecommunications equipment, Electromagnetic compatibility (EMC), Electrical engineering in general, Insulating materials.
Underwriters Laboratories (UL), Flame Retardant Instruments
- UL 555-1990 Fire dampers
- UL 555-1995 Fire dampers
- UL 555-1999 Fire dampers
- UL 555-2006 UL Standard for Safety Fire Dampers Seventh Edition
- UL SUBJECT 1357-2012 OUTLINE OF INVESTIGATION FOR OXYGEN-FUEL GAS FLASH ARRESTER AND COMBINATION FLASH ARRESTER AND BACK-PRESSURE CHECK VALVES (Issue 5)
- UL SUBJECT 1357-2013 OUTLINE OF INVESTIGATION FOR OXYGEN-FUEL GAS FLASH ARRESTER AND COMBINATION FLASH ARRESTER AND BACK-PRESSURE CHECK VALVES (Issue 6)
- UL SUBJECT 1357-2009 OUTLINE OF INVESTIGATION FOR OXYGEN-FUEL GAS FLASH ARRESTER AND COMBINATION FLASH ARRESTER AND BACK-PRESSURE CHECK VALVES (Issue 4)
- UL 17 BULLETIN-2019 UL Standard for Safety Vent or Chimney Connector Dampers for Oil-Fired Appliances
- UL SUBJECT 1357-2005 OUTLINE OF INVESTIGATION FOR OXYGEN-FUEL GAS COMBINATION FLASH ARRESTER AND BACK-PRESSURE CHECK VALVES (Issue Number 2)
Professional Standard - Electricity, Flame Retardant Instruments
- DL/T 1334-2014 Piezoresistive sensor readout box
- DL/T 1742-2017 Differential Resistance Measuring Instruments
- DL/T 1254-2013 Specification for appraisal of elastic wire resistance type sensor
- DL/T 1694.5-2017 Calibration specifications for high-voltage testing instruments and equipment Part 5: Zinc oxide arrester resistive current tester
- DL/T 987-2005 General technical conditions of resistive current tester for zinc oxide surge arrester
- DL/T 987-2017 General technical requirements for zinc oxide arrester resistive current tester
International Electrotechnical Commission (IEC), Flame Retardant Instruments
- IEC 61027:1991 Instruments for the measurement of aural acoustic impedance/admittance
- IEC 62397:2007 Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
- IEC 62397:2022 Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
Danish Standards Foundation, Flame Retardant Instruments
- DS/EN 61027:1994 Instruments for the measurement of aural acoustic impedance/admittance
- DS/ISO 29541:2011 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
- DS/EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
- DS/EN 12514-2:2000 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; Parts, valves, pipes, filters, oil de-aerators, meters
- DS/EN 60645-5:2005 Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance
- DS/ISO 21663:2020 Solid recovered fuels – Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
Professional Standard - Machinery, Flame Retardant Instruments
- JB/T 11277-2012 Non-destructive testing instruments - Single channel acoustic impedance instrument
- JB/T 4279.2-1994 Enamelled winding wire test equipment verification method DC resistance test device
- JB/T 4279.2-2008 Verification procedure for test equipment of enamelled winding wire.Part 2:DC electrical resistance tester
Korean Agency for Technology and Standards (KATS), Flame Retardant Instruments
- KS C 5116-2003 Fixed carbon composition resistors for use in electronic equipment
- KS C 5115-8-2001 Fixed resistors for use in electronic equipment－Part 8：Sectional specification：Fixed chip resistors
- KS C 5115-4-2001 Fixed resistors for use in electronic equipment－Part 4：Sectional specification：Fixed power resistors
- KS C 5115-5-2001 Fixed resistors for use in electronic equipment－Part 5：Sectional specification：Fixed precision resistors
- KS C 5115-7-2001 Fixed resistors for use in electronic equipment－Part 7：Sectional specification：Fixed resistor networks in whichnot all resistors are individually measurable
- KS C 5115-6-2001 Fixed resistors for use in electronic equipment－Part 6：Sectional specification：Fixed resistor networks withindividually measurable resistors
- KS C 5115-2-2001 Fixed resistors for use in electronic equipment－Part 2：Sectional specification：Fixed low-power non-wirewound resistors
- KS C 5115-81-2001 Fixed resistors for use in electronic equipment-Part 8:Blank detail specification:Fixed chip resistors Assessment level E
- KS C 5115-42-2001 Fixed resistors for use in electronic equipment-Part 4:Blank detail specification:Fixed power resistors Assessment level F
- KS E 4115-2006(2011) Interferometer type gas alarms
- KS E 4115-1980 Interferometer type gas alarms
- KS C 5115-51-2001 Fixed resistors for use in electronic equipment-Part 5:Blank detail specification:Fixed precision resistors Assessment level E
- KS C 5115-43-2001 Fixed resistors for use in electronic equipment-Part 4:Blank detail specification:Fixed power resistors, heat-sink types Assessment level H
- KS C 5115-21-2001 Fixed resistors for use in electronic equipment-Part 2:Blank detail specification:Fixed low-power non-wirewound resistors Assessment level E
- KS C 5115-22-2001 Fixed resistors for use in electronic equipment-Part 2:Blank detail specification:Fixed low-power non-wirewound resistors Assessment level F
- KS C 5115-71-2001 Fixed resistors for use in electronic equipment-Part 7:Blank detail specification:Fixed resistor networks in whichnot all resistors are individually measurable Assesment level E
- KS C IEC 62397-2012(2022) Nuclear power plants－Instrumentation and control important to safety－Resistance temperature detectors
- KS C IEC 62397-2012(2017) Nuclear power plants－Instrumentation and control important to safety－Resistance temperature detectors
- KS C 5115-62-2001 Fixed resistors for use in electronic equipment-Part 6:Blank detail specification: Fixed resistor networks withindividually measurable resistors, of either different resistancevalues or different rated dissipations Assessment level E
- KS C IEC 60645-5A:2017 Electroacoustics — Audiometric equipment — Part 5：Instruments for the measurement of aural acoustic impedance/admittance
- KS C IEC 60645-5-2007(2012) Electroacoustics－Audiometric equipment－Part 5：Instruments for the measurement of aural acoustic impedance/admittance
- KS C IEC 60645-5A-2017(2022) Electroacoustics — Audiometric equipment — Part 5：Instruments for the measurement of aural acoustic impedance/admittance
- KS C 6599-2007(2018) Installation, operation and maintenance of combustible gases detection instruments in domestic premises
- KS C 5115-4102-2001 Fixed resistors for use in electronic equipment-Part 4:Detail specification:Fixed power wirewound resistors withsolderable axial wire leads-Stability class 1 %-Assessment level E
- KS C 5115-4101-2001 Fixed resistors for use in electronic equipment-Part 4:Detail specification:Fixed power wirewound resistors withsolderable axial wire leads-Stability class 5 %-Assessment level E
- KS C 5115-61-2001 Fixed resistors for use in electronic equipment-Part 6:Blank detail specification:Fixed resistor networks with individually measurable resistors, all of equal value and equal dissipation Assessment level E
- KS R ISO 10054:2009 Internal combustion compression-ignition engines－Measurement apparatus for smoke from engines operating under steady-state conditions－Filter-type smokemeter
- KS C 5115-6101-2001 Fixed resistors for use in electronic equipment-Part 6:Detail specification:Fixed thick film resistor networks with individually measurable resistors, all of equal value and equal dissipation, class 1(dual-in-line network)
- KS C 5115-6102-2001 Fixed resistors for use in electronic equipment-Part 6:Detail specification:Fixed thick film resistor networks with individually measurable resistors, all of equal value and equal dissipation, class 1 (single-in-line network)
- KS C IEC 61034-1:2020 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus
American Society for Testing and Materials (ASTM), Flame Retardant Instruments
- ASTM F1930-18 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
- ASTM D2068-97 Standard Test Method for Filter Blocking Tendency of Distillate Fuel Oils
- ASTM F1930-23 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
- ASTM D2068-04 Standard Test Method for Filter Plugging Tendency of Distillate Fuel Oils
- ASTM F2517-22 Standard Specification for Determination of Child Resistance of Portable Fuel Containers for Consumer Use
- ASTM E2058-13a Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Flame Retardant Instruments
- GB/T 15953-1995 Instruments for the measurement of aural acoustic impedance/admittance
- GB/T 3413-2008 Instrument for dam monitoring.Embedded Cu resistance thermometer
- GB/T 14060-1993 DDZ-III series process electronic control system Impedance converter
- GB/T 3408.1-2008 Instrument for dam monitoring.Strain meter.Part 1:Unbonded elastic wire resistance strain meter
- GB/T 3409.1-2008 Instrument for dam monitoring.Rebar strain meter.Part 1:Unbonded elastic wire relistance rebar srtain meter
- GB/T 3410.1-2008 Instrument for dam monitoring.joint meter.Part 1:Unbonded elastic wire resistance joint meter
- GB/T 22264.6-2009(英文版) Fixed digital electric measuring instruments—Part 6: Special requirements for insulation resistance meters
- GB/T 7341.5-2018 Electroacoustics.Audiometric equipment.Part 5:Instruments for the measurement of aural acoustic impedance/admittance
Society of Automotive Engineers (SAE), Flame Retardant Instruments
- SAE AS405D-2012 Fuel and Oil Quantity Instruments
- SAE J1862-2000 (R) Fuel Injection System Fuel Pressure Regulator and Pressure Damper
- SAE AS408B-1991 PRESSURE INSTRUMENTS - FUEL, OIL and HYDRAULIC (RECIPROCATING ENGINE POWERED AIRCRAFT)
Association Francaise de Normalisation, Flame Retardant Instruments
- NF ISO 3930:2001 Instruments de mesure des gaz d'échappement des véhicules
- NF C97-615:1993 Instruments for the measurement of aural acoustic impedance/admittance.
- NF C23-541-2:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2 : performance requirements for apparatus for the detection of combustible gases.
- NF EN 60645-5:2005 Électroacoustique - Appareillage audiométrique - Partie 5 : instruments pour la mesure de l'impédance ou de l'admittance aurale (impédancemètres ou admittancemètres)
- NF EN IEC/IEEE 62582-6:2021 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Méthodes de surveillance de l'état des matériels électriques - Partie 6 : résistance d'isolement
- NF X34-117:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods.
- NF C23-558:1992 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent (V/V) gas.
- NF X34-220:2020 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
- NF C23-570:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.
- NF C23-570*NF EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
- NF C32-073-1:1993 MEASUREMENT OF SMOKE DENSITY OF ELECTRIC CABLES BURNING UNDER DEFINED CONDITIONS. PART 1 : TEST APPARATUS.
- NF EN ISO 21663:2020 Combustibles solides de récupération - Méthodes de détermination de la teneur en carbone (C), hydrogène (H), azote (N) et soufre (S) par la méthode instrumentale
American National Standards Institute （ANSI), Flame Retardant Instruments
- ANSI/TIA-455-172-1986 Flame Resistance of Firewall Connector
- ANSI/ASA S3.39-1987 Specifications for Instruments to Measure Aural Acoustic Impedance and Admittance (Aural Acoustic Immittance)
- ANSI S3.39-1987 Specifications for Instruments to Measure Aural Acoustic Impedance and Admittance (Aural Acoustic Immittance)
- ANSI N42.37-2006 Training Requirements for Homeland Security Purposes Using Radiation Detection Instrumentation for Interdiction and Prevention
- ANSI/ISA 60079-1(12.22.01)-2009 Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Flameproof "d"
Professional Standard - Electron, Flame Retardant Instruments
- SJ/Z 9174-1995 Specifications for determination of 0.25W and 0.5W retardant carbon film resistors used for VCR
- SJ/Z 9178-1995 Specifications for determination of 2W flame-retardant power type wirewound resistors used for VCR
- SJ/Z 9179-1995 Specifications for determination of porcelain-shell flame-retardant power type wirewound resistors used for VCR
Group Standards of the People's Republic of China, Flame Retardant Instruments
- T/GDCKCJH 047-2021 Performance requirements and test method for mask flame retardant tester
- T/ZZB 0518-2018 For low voltage electric appliances industry:high temperature & yellowing resistant flame retardant and reinforced polyamide
- T/CEC 354-2020 General technical requirements for transformer low-voltage short-circuit impedance tester
- T/SHPTA 040-2023 Flame-retardant PBT engineering plastics used for unattended electrical plastic parts
- T/ZZB 0476-2018 The special flame retarding reinforced polyamide composite for low voltage electrical apparatus
- T/SHPTA 030-2022 Polyvinyl-fluoride?flame-retardant & weathering-resistant decorative laminates for civil aviation
Professional Standard - Urban Construction, Flame Retardant Instruments
SE-SIS, Flame Retardant Instruments
United States Navy, Flame Retardant Instruments
RU-GOST R, Flame Retardant Instruments
- GOST 8623-1978 Supplementary resistances for electrical measuring instruments. Specifications
- GOST 28610-1990 Fixed resistors for use in electronic equipment. Part 2. Sectional specification: fixed low-power non-wirewound resistors
- GOST 28611-1990 Fixed resistors for use in electronic equipment. Part 2. Blanc detail specification: fixed low-power non-wirewound resistors. Assessment level E
- GOST 28608-1990 Fixed resistors for use in electronic equipment. Part 1. General specification
- GOST R 54244-2010 Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
- GOST 14014-1991 Digital instruments and measuring transducers of voltage, current and resistance. General technical requirements and methods of tests
- GOST 14014-1982 Digital instruments and measuring transducers of voltage, current and resistance. General specifications
- GOST R IEC 61241-2-2-1999 Electrical apparatus for use in the presence of combustible dust. Part 2. Test methods. Section 2. Method for determining the electrical resistivity of dust in layers
- GOST R IEC 61241-1-1-1999 Electrical apparatus for use in the presence of combustible dust. Part 1-1. Electrical apparatus protected by enclosures and surface temperature limitation. Specification for apparatus
- GOST 32979-2014 Solid mineral fuel. Instrumental method for determination of carbon, hydrogen and nitrogen
- GOST 32985-2014 Solid biofuels. Determination of carbon, hydrogen and nitrogen by instrumental methods
- GOST R 54216-2010 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen by instrumental methods
- GOST 33513-2015 Solid recovered fuel. Determination of carbon (C), hydrogen (H) and nitrogen (N) content by instrumental method
- GOST 17750-1972 Jet fuel. Method for the determination luminometric number on the PLCHT instrument
- GOST R IEC 61241-3-1999 Electrical apparatus for use in the presence of combustible dust. Part 3. Classification of areas
- GOST R IEC 61241-18-2009 Electrical apparatus for use in the presence of combustible dust. Part 18. Protection by encapsulation «mD»
- GOST R IEC 61241-14-2008 Electrical apparatus for use in the presence of combustible dust. Part 14. Selection and installation
- GOST R IEC 61241-1-2-1999 Electrical apparatus for use in the presence of combustible dust. Past 1:2. Electrical apparatus protected by enclosures and surface temperature limitation. Selection, installation and maintenance
- GOST 23706-1993 Direct acting indicating electrical measuring instruments and their accessories. Part 6. Special requirements for ohmmeters (impedance meters) and conductance meters
- GOST 23706-1979 Ohmmeters. General specifications
SAE - SAE International, Flame Retardant Instruments
- SAE J1862-1990 Fuel Injection System Fuel Pressure Regulator and Pressure Damper@ Recommended Practice (February 1990)
- SAE J1862-2012 Fuel Injection System Fuel Pressure Regulator and Pressure Damper
TIA - Telecommunications Industry Association, Flame Retardant Instruments
HU-MSZT, Flame Retardant Instruments
Japanese Industrial Standards Committee (JISC), Flame Retardant Instruments
- JIS M 7602:1993 Interferometer type instrumental gas detector for inflammable gas
- JIS D 8005:2009 Road vehicles -- Reciprocating internal combustion compression-ignition engines -- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
- JIS B 8572-1:2008 Fuel oil flow meters -- Measuring instruments used in transaction or certification -- Part 1: Fuel dispensers for motor vehicles
- JIS C 5402-2-1:2005 Connectors for electronic equipment -- Tests and measurements -- Part 2-1: Electrical continuity and contact resistance tests -- Test 2a : Contact resistance -- Millivolt level method
NL-NEN, Flame Retardant Instruments
- NEN 11027-1993 Instruments for the measurement of aural acoustic impedance/admittance (IEC 1027:1991)
- NEN 2873-1982 Testing of stony materials - Skid-resistance apparatus according Leroux and determination of surf ace frictional properties
CENELEC - European Committee for Electrotechnical Standardization, Flame Retardant Instruments
- EN 61027:1993 Instruments for the Measurement of Aural Acoustic Impedance/Admittance
National Metrological Technical Specifications of the People's Republic of China, Flame Retardant Instruments
- JJF 1771-2019 Program of Pattern Evaluation for Measuring Instruments of Aural Acoustic Impedance/Admittance
British Standards Institution (BSI), Flame Retardant Instruments
- BS ISO 13506:2008 Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin
- BS ISO 11614:1999 Reciprocating internal combustion compression-ignition engines - Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
- BS 6020-5:1982 Instruments for the detection of combustible gases - Specification for performance requirements for Group II instruments reading up to 100% gas
- BS EN 50241-2:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Performance requirements for apparatus for the detection of combustible gases
- BS 6020-4:1981 Instruments for the detection of combustible gases - Specification for performance requirements for Group II instruments reading up to 100% lower explosive limit
- BS 6020-3:1982 Instruments for the detection of combustible gases - Specification for safety and performance requirements for Group I instruments reading up to 100% methane
- BS IEC 62397:2007 Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
- BS ISO 29541:2010 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen content. Instrumental method
- BS 1428-B2:1960 Microchemical analysis - Apparatus for the determination of elements by other than combustion methods - Specification for ammonia distillation apparatus (Markham)
- BS 6020-1:1981 Instruments for the detection of combustible gases - Specification for general requirements and test methods
- BS EN 15104:2011 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods
- BS 6020-2:1981 Instruments for the detection of combustible gases - Specification for safety and performance requirements for Group I instruments reading up to 5% methane in air
- BS DD CEN/TS 15104:2006 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
- BS DD CEN/TS 15104:2005 Solid biofuels — Determination of total content of carbon, hydrogen and nitrogen — Instrumental methods
- BS IEC 62397:2022 Tracked Changes. Nuclear power plants. Instrumentation and control important to safety. Resistance temperature detectors
- DD ISO/TS 12902:2002 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen. Instrumental methods
- 21/30405935 DC BS IEC 62397. Nuclear power plants. Instrumentation and control systems important to safety. Resistance temperature detectors
- BS 7967:2015 Guide for the use of electronic portable combustion gas analysers for the measurement of carbon monoxide in dwellings and the combustion performance of domestic gas-fired appliances
Professional Standard - Military and Civilian Products, Flame Retardant Instruments
- WJ 2282-1995 Verification regulations for protective equipment ventilation resistance tester
International Organization for Standardization (ISO), Flame Retardant Instruments
- ISO 11614:1999 Reciprocating internal combustion compression-ignition engines - Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
- ISO/TS 12902:2001 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
- ISO/CD 29541:1976 Solid mineral fuels — Determination of total carbon, hydrogen and nitrogen content — Instrumental method
- ISO 29541:2010 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method
- ISO 10054:1998 Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter-type smokemeter
工业和信息化部, Flame Retardant Instruments
- HG/T 6041-2022 Flame retardant polyamide for plastic low-voltage electrical appliance enclosures
Defense Logistics Agency, Flame Retardant Instruments
- DLA QPL-29-QPD-2011 Resistors, Fixed, Meter Multiplier, External (High Voltage, Ferrule Terminal Type)
- DLA QPL-29-53-2006 RESISTORS, FIXED, METER MULTIPLIER, EXTERNAL (HIGH VOLTAGE, FERRULE TERMINAL TYPE)
BE-NBN, Flame Retardant Instruments
Professional Standard - Energy, Flame Retardant Instruments
- NB/SH/T 0895-2015 Determination of filter blocking tendency of middle distillate fuels and liquid fuels
Professional Standard - Earthquake, Flame Retardant Instruments
- DB/T 29.1-2008 Technical requirements of instruments in network for earthquake monitoring.Geoelectrical meters.Part 1: Direct current meter for geoelectrical resistivity
U.S. Air Force, Flame Retardant Instruments
- AIR FORCE MIL-PRF-27617 G-2011 GREASE, AIRCRAFT AND INSTRUMENT, FUEL AND OXIDIZER RESISTANT
- AIR FORCE QPL-27617-2012 Grease, Aircraft and Instrument, Fuel and Oxidizer Resistant
- AIR FORCE MIL-DTL-25988 C-2006 RUBBER, FLUOROSILICONE ELASTOMER, OIL-AND FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES
National Metrological Verification Regulations of the People's Republic of China, Flame Retardant Instruments
- JJG 991-2017 Verification regulations for audiometric equipment otoacoustic impedance/admittance measuring instruments
- JJG(石油) 34-1995 Verification Regulation of Mud Pit Resistance Volume Sensor
- JJG(电子) 05013-1988 AV2551 type potentiometer dynamic contact resistance change measuring instrument trial verification regulations
RO-ASRO, Flame Retardant Instruments
American Petroleum Institute (API), Flame Retardant Instruments
Professional Standard - Railway, Flame Retardant Instruments
- TB/T 2702-1996 Flame retardant requirements for non-metallic materials of railway passenger car electrical equipment
ISA - International Society of Automation, Flame Retardant Instruments
KR-KS, Flame Retardant Instruments
- KS C 6591-2007(2023) Installation, operation and maintenance of combustible gas detection instruments
- KS C 6599-2007(2023) Installation, operation and maintenance of combustible gases detection instruments in domestic premises
- KS C IEC 60645-5A-2017 Electroacoustics — Audiometric equipment — Part 5：Instruments for the measurement of aural acoustic impedance/admittance
- KS C IEC 61034-1-2020 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Flame Retardant Instruments
- GB/T 35684-2017 Technique requirements for explosion suppression material in fuel tank explosive atmospheres
German Institute for Standardization, Flame Retardant Instruments
- DIN 3388-4:1984-12 Flue gas dampers for gas appliances, thermaly controlled, connected to the appliances; requirements, testing, marking
- DIN ISO 13506:2008 Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin (ISO 13506:2008); English version of DIN ISO 13506:2008-12
- DIN 51724-3:2012 Solid mineral fuels - Determination of sulfur content - Part 3: Instrumental methods
- DIN 51724-3:2012-07 Solid mineral fuels - Determination of sulfur content - Part 3: Instrumental methods
- DIN 51724-3:2008 Solid mineral fuels - Determination of sulfur - Part 3: Instrumental methods
- DIN 51732:2014 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
- DIN 51732:2007 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
- DIN 51732:2014-07 Testing of solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
- DIN EN 60645-5:2005-08 Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance (IEC 60645-5:2004); German version EN 60645-5:2005 / Note: DIN EN 61027 (1993-10) remains valid alongside this standard until 2007...
- DIN EN ISO 21663:2021-03 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020); German version EN ISO 21663:2020
Taiwan Provincial Standard of the People's Republic of China, Flame Retardant Instruments
- CNS 3514-1974 Method of Test for Combustible Properties of Treated Wood by the Fire-Tube Apparatus
Acoustical Society of America (ASA), Flame Retardant Instruments
- ASA S3.39-1987 Specifications for Instruments to Measure Aural Acoustic Impedance and Admittance (Aural Acoustic Immittance)
CZ-CSN, Flame Retardant Instruments
- CSN 38 5529-1985 Gaseous fuels. Analysis by means of absorption-chromatographic apparatus
- CSN 34 5615 Z4-1998
- CSN 35 6512-1988 Electronic measuring instruments. General requirements on firmness and resistance at performance of mechanical influences and testing methods
API - American Petroleum Institute, Flame Retardant Instruments
- API RP 556-2011 Instrumentation@ Control@ and Protective Systems for Gas Fired Heaters (Second Edition)
- API RP 556 RUSSIAN-2011 Instrumentation@ Control@ and Protective Systems for Gas Fired Heaters (Second Edition)
- API RP 12N-1986 RECOMMENDED PRACTICE FOR THE OPERATION@ MAINTENANCE AND TESTING OF FIREBOX FLAME ARRESTORS FIRST EDITION
Professional Standard - Aviation, Flame Retardant Instruments
- HB 20085-2012 Test methods of elastic support with squeeze oil film damper of aircraft gas turbine engine
- HB 7101-1994 Minimum performance requirements for civil aircraft fuel, oil and hydraulic pressure instruments
European Committee for Standardization (CEN), Flame Retardant Instruments
- EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
- EN 2591-315:1998 Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 315: Fluid Resistance
- EN 2591-317:1998 Aerospace series - Elements of electrical and optical connection - Test methods - Part 317: Flammability
CEN - European Committee for Standardization, Flame Retardant Instruments
- PD CEN/TS 15104:2005 Solid biofuels - Determination of total content of carbon@ hydrogen and nitrogen - Instrumental methods
Lithuanian Standards Office , Flame Retardant Instruments
- LST EN 15104-2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
- LST EN 12514-2-2001 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters
- LST EN 60645-5-2005 Electroacoustics. Audiometric equipment. Part 5: Instruments for the measurement of aural acoustic impedance/admittance (IEC 60645-5:2004)
ZA-SANS, Flame Retardant Instruments
- SANS 12902:2007 Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods
- SANS 61034-1:2006 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus
ES-AENOR, Flame Retardant Instruments
AENOR, Flame Retardant Instruments
- UNE-EN 60645-5:2006 Electroacoustics - Audiometric equipment -- Part 5: Instruments for the measurement of aural acoustic impedance/admittance
- UNE-EN 12514-2:2001 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters.
Instrument Society of America (ISA), Flame Retardant Instruments
- ISA TR84.00.05-2009 Guidance on the Identification of Safety Instrumented Functions (SIF) in Burner Management Systems (BMS)
IN-BIS, Flame Retardant Instruments
The American Road & Transportation Builders Association, Flame Retardant Instruments
- AASHTO T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
- AASHTO T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
- AASHTO T 245-2015 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO - American Association of State Highway and Transportation Officials, Flame Retardant Instruments
- T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
- T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
- T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
Military Standard of the People's Republic of China-General Armament Department, Flame Retardant Instruments
- GJB 9852.10-2020 Technical requirements for energy equipment selection Part 10: Explosion-proof electrostatic ground resistance tester
European Committee for Electrotechnical Standardization（CENELEC）, Flame Retardant Instruments
- EN 60051-6:1989 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 6: Special Requirements for ohmmeters (Impedance Meters) and Conductance Meters
ES-UNE, Flame Retardant Instruments
- UNE-EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO 21663:2020)
AT-ON, Flame Retardant Instruments
- ONORM E 6512-1995 Pliable cable protecting conduits with coupler of PVC-U, corrugated, normal Performance, non flame propagating
IT-UNI, Flame Retardant Instruments
- UNI EN ISO 21663:2021 Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
PL-PKN, Flame Retardant Instruments
- PN C04046-1965 Petroleum products Me?hod of ?es? for filtration of engine fulels by AzNII-FT-2 I appara?us
Standard Association of Australia （SAA）, Flame Retardant Instruments
- AS 60695.7.50:2006 Fire hazard testing - Toxicity of fire effluent - Estimation of toxic potency - Apparatus and test method