ZH

RU

ES

Primer quality

Primer quality, Total:497 items.

In the international standard classification, Primer quality involves: Biology. Botany. Zoology, Materials for aerospace construction, Meat, meat products and other animal produce, Microbiology, Quality, Soil quality. Pedology, Transport, Iron and steel products, Materials for the reinforcement of composites, Measurement of volume, mass, density, viscosity, Road vehicle systems, Passenger cars. Caravans and light trailers, Optical equipment, Protection against dangerous goods, Products of the textile industry, Plastics, On-board equipment and instruments, Railway rolling stock, Galvanic cells and batteries, Road engineering, Analytical chemistry, Cereals, pulses and derived products, Pulps, Miscellaneous domestic and commercial equipment, Structures of buildings, Water quality, Materials and articles in contact with foodstuffs, Construction materials, Animal feeding stuffs, Farming and forestry, Piezoelectric and dielectric devices, Bearings, Materials and components for railway engineering, Mechanical structures for electronic equipment, Textile fibres, Footwear, Environmental protection, Electric traction equipment, Installations in buildings, Shipbuilding and marine structures in general, Vocabularies, Edible oils and fats. Oilseeds, Products of the chemical industry, Paints and varnishes, Paint ingredients, Coals, Air quality, Vacuum technology, Wastes, Earth-moving machinery, Commercial vehicles, Waxes, bituminous materials and other petroleum products, Rubber, Company organization and management, Rubber and plastics products, Energy and heat transfer engineering in general, Furniture, Fertilizers, Electricity. Magnetism. Electrical and magnetic measurements, Hydraulic construction, Protection of and in buildings, Raw materials for rubber and plastics, Tyres, Fuels, Farm buildings, structures and installations, Textile auxiliary materials, Pesticides and other agrochemicals, Services, Equipment for entertainment, Inorganic chemicals, Metalliferous minerals, Chocolate, Wood, sawlogs and sawn timber, Adhesives, Tea. Coffee. Cocoa, Leather technology, Electronic component assemblies, Quantities and units, Heat recovery. Thermal insulation, Agricultural machines, implements and equipment, Fluid storage devices.


中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Primer quality

United States Navy, Primer quality

Indonesia Standards, Primer quality

German Institute for Standardization, Primer quality

  • DIN 58959 Bb.1:1997 Quality management in medical microbiology - Overview and index
  • DIN 19706:2013-02 Soil quality - Determination of the soil erosion risk caused by wind
  • DIN ISO 15795:2008 Optics and photonics - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations (ISO 15795:2002+Cor. 1:2007);English version of DIN ISO 15795:2008-04
  • DIN ISO 15795:2008-04 Optics and photonics - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations (ISO 15795:2002+Cor. 1:2007)
  • DIN 19731:1998 Soil quality - Utilization of soil material
  • DIN ISO 15799:2004 Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials (ISO 15799:2003)
  • DIN EN ISO 15496:2004 Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control (ISO 15496:2004); German version EN ISO 15496:2004
  • DIN EN ISO 520:2011-03 Cereals and pulses - Determination of the mass of 1000 grains (ISO 520:2010); German version EN ISO 520:2010
  • DIN ISO 15795:2006 Optics and optical instruments - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations (ISO 15795:2002);English version of DIN ISO 15795-2006-03
  • DIN EN 13630-10:2005 Explosives for civil uses - Detonating cords and safety fuses - Part 10: Determination of initiating capability of detonating cords; German version EN 13630-10:2005
  • DIN EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter; English version of DIN EN 14907
  • DIN ISO 11262:2012-04 Soil quality - Determination of total cyanide (ISO 11262:2011)
  • DIN EN 13630-9:2004 Explosives for civil uses - Detonating cords and safety fuses - Part 9: Determination of transmission of detonation from detonating cord to detonating cord; German version EN 13630-9:2004
  • DIN EN ISO 14240-1:2011-09 Soil quality - Determination of soil microbial biomass - Part 1: Substrate-induced respiration method (ISO 14240-1:1997); German version EN ISO 14240-1:2011
  • DIN EN 16493:2014-11 Water quality - Nomenclatural requirements for the recording of biodiversity data, taxonomic checklists and keys; German version EN 16493:2014
  • DIN 19732:2011 Soil quality - Determination of the site specific potential for translocation of non-sorbable substances
  • DIN 51904:2012-11 Testing of carbonaceous materials - Determination of water content - Solid matters
  • DIN EN 17725:2023-06 Plant biostimulants - Determination of the quantity (indicated by mass or volume); German and English version prEN 17725:2023 / Note: Date of issue 2023-05-19*Intended as replacement for DIN CEN/TS 17725 (2022-07).
  • DIN CEN/TS 17725:2022-07 Plant biostimulants - Determination of the quantity (indicated by mass or volume); German version CEN/TS 17725:2022
  • DIN ISO 15799:2021 Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials (ISO 15799:2019)
  • DIN 10755:2001-04 Analysis of honey - Determination of mineral content
  • DIN EN ISO 15496 Berichtigung 1:2006 Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control (ISO 15496:2004); German version EN ISO 15496:2004, Corrigenda to DIN EN ISO 15496:2004-09; German version EN ISO 15496:2004/AC:2006
  • DIN 5491:1970-09 Mass transfer (diffusion and transport of matter); basic concepts, quantities, symbols, dimensionless parameters
  • DIN 19739-2:2003 Air and soil quality - Measurement of atmospheric deposition of organic trace substances; Funnel adsorber method - Part 2: Determination of polynuclear aromatic hydrocarbons
  • DIN EN 13630-5:2004 Explosives for civil uses - Detonating cords and safety fuses - Part 5: Determination of resistance to abrasion of detonating cords; German version EN 13630-5:2003
  • DIN EN 12145:1996-10 Fruit and vegetable juices - Determination of total dry matter - Gravimetric method with loss of mass on drying; German version EN 12145:1996
  • DIN EN ISO 22030:2011-09 Soil quality - Biological methods - Chronic toxicity in higher plants (ISO 22030:2005); German version EN ISO 22030:2011
  • DIN CEN/TS 17773:2022-07 Organic and organo-mineral fertilizers - Determination of the dry matter content; German version CEN/TS 17773:2022
  • DIN ISO 10473:2002-08 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method (ISO 10473:2000)

Professional Standard - Military and Civilian Products, Primer quality

Standard Association of Australia (SAA), Primer quality

  • AS 3906:2004 Quality of service - Guide to customer expectations
  • ASRM 012B-3-2005 Reference material - Coal sample having total sulfur of 0.68%

American National Standards Institute (ANSI), Primer quality

Society of Automotive Engineers (SAE), Primer quality

Electronic Industrial Alliance (U.S.), Primer quality

CU-NC, Primer quality

International Organization for Standardization (ISO), Primer quality

  • ISO 11465:1993 Soil quality; determination of dry matter and water content on a mass basis; gravimetric method
  • ISO 4605:1978 Textile glass; Woven fabrics; Determination of mass per unit area
  • ISO 6016:1982 Earth-moving machinery; Methods of measuring the masses of whole machines, their equipment and components
  • ISO 15795:2002 Optics and photonics - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations
  • ISO 4074-8:1984 Rubber condoms; Part 8 : Determination of mass
  • ISO 8543:1986 Textile floor coverings; Methods for determination of mass
  • ISO 11465:1993/Cor 1:1994 Soil quality; determination of dry matter and water content on a mass basis; gravimetric method; technical corrigendum 1
  • ISO 28801:2011 Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
  • ISO 11262:2003 Soil quality - Determination of cyanide
  • ISO 15496:2004 Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control
  • ISO 15496:2018 Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control
  • ISO 16620-4:2016 Plastics - Biobased content - Part 4: Determination of biobased mass content
  • ISO/DIS 16620-4:2023 Plastics — Biobased content — Part 4: Determination of biobased mass content
  • ISO 16620-5:2017 Plastics - Biobased content - Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
  • ISO 1005-3:1982 Railway rolling stock material; Part 3 : Axles for tractive and trailing stock; Quality requirements
  • ISO 1005-7:1982 Railway rolling stock material; Part 7 : Wheelsets for tractive and trailing stock; Quality requirements
  • ISO 21479:2019 Soil quality — Determination of the effects of pollutants on soil flora — Leaf fatty acid composition of plants used to assess soil quality
  • ISO 15795:2002/cor 1:2007 Optics and optical instruments - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations; Technical Corrigendum 1
  • ISO 23196:2022 Water quality — Calculation of biological equivalence (BEQ) concentrations
  • ISO 11349:2010 Water quality - Determination of low-volatility lipophilic substances - Gravimetric method
  • ISO 3801:1977 Textiles; Woven fabrics; Determination of mass per unit length and mass per unit area
  • ISO 16198:2015 Soil quality - Plant-based test to assess the environmental bioavailability of trace elements to plants
  • ISO 15799:2003 Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials
  • ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter
  • ISO 2920:2004|IDF 58:2004 Determination of dry matter content of ricotta cheese
  • ISO 1005-1:1982 Railway rolling stock material; Part 1 : Rough-rolled tyres for tractive and trailing stock; Quality requirements

Korean Agency for Technology and Standards (KATS), Primer quality

  • KS I ISO 11465:2005 Soil quality-Determination of dry matter and water contenton a mass basis-Gravimetric method
  • KS L ISO 4605:2008 Textile glass-Woven fabrics-Determination of mass per unit area
  • KS B ISO 15795-2011(2021) Optics and photonics — Quality evaluation of optical systems —Assessing the image quality degradation due to chromatic aberrations
  • KS I ISO 11465:2021 Soil quality — Determination of dry matter and water content on a mass basis — Gravimetric method
  • KS I ISO 11465-2005(2015) Soil quality-Determination of dry matter and water contenton a mass basis-Gravimetric method
  • KS B ISO 15795:2011 Optics and photonics-Quality evaluation of optical systems-Assessing the image quality degradation due to chromatic aberrations
  • KS I ISO 14240-1-2009(2014) Soil quality-Determination of soil microbial biomass-Part 1:Substrateinduced
  • KS R ISO 1005-7-2004(2009) Railway rolling stock material-Part 7:Wheelsets for tractive and trailing stock-Quality requirements
  • KS Q ISO 28592:2019 Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality(PRQ) and consumer's risk quality(CRQ)
  • KS Q ISO 28801:2018 Double sampling plans by attributes with minimal sample sizes, indexed by producer''s risk quality(PRQ) and consumer''s risk quality(CRQ)
  • KS K ISO 8543:2011 Textile floor coverings-Methods for determination of mass
  • KS I ISO 11262:2019 Soil quality ― Determination of total cyanide
  • KS F ISO 6016:2003 Earth-moving machinery-Methods of measuring the masses of whole machines, their equipment and components
  • KS R ISO 1005-7:2004 Railway rolling stock material-Part 7:Wheelsets for tractive and trailing stock-Quality requirements
  • KS R ISO 1005-3:2004 Railway rolling stock material-Part 3:Axle for tractive and trailing stock-Quality requirement
  • KS K ISO 12951:2008 Textile floor coverings-Determination of mass loss using the Lisson test
  • KS K ISO 12951:2016 Textile floor coverings-Determination of mass loss using the Lisson test
  • KS M ISO 248:2007 Rubber, raw-Determination of volatile-matter content
  • KS H ISO 520-2009(2019) Cereals and pulses-Determination of the mass of 1 000 grains
  • KS I ISO 6107-9:2007 Water quality-Vocabulary-Part 9:Alphabetical list and subject index
  • KS C IEC 60368-3:2018 Piezoelectric filters of assessed quality — Part 3: Standard outlines and lead connections
  • KS C IEC 60368-3-2023 Evaluating the Quality of Piezoelectric Filters Part 3: Standard Profiles and Lead Connections
  • KS I ISO 22030-2016(2021) Soil quality-Biological methods-Chronic toxicity in higher plants
  • KS I ISO 15799:2009 Soil quality-Guidance on the ecotoxicological characterization of soils and soil materials
  • KS I ISO 9096:2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
  • KS L ISO 1887:2018 Textile glass — Determination of combustible-matter content
  • KS I ISO 10473:2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
  • KS Q ISO 3951-1:2019 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristi
  • KS B ISO 21244:2011 Agricultural equipment-Mechanical connections between towed and towing vehicles-Implement hitch rings and attachment to tractor drawbars
  • KS B ISO 21244:2016 Agricultural equipment-Mechanical connections between towed and towing vehicles-Implement hitch rings and attachment to tractor drawbars
  • KS R ISO 1005-1:2004 Railway rolling stock material-Part 1:Rough-rolled tyres for tractive andtrailing stock-Technical delivery conditions
  • KS C IEC 60122-3:2018 Quartz crystal units of assessed quality — Part 3: Standard outlines and lead connections
  • KS M ISO 2871:2007 Surface active agents-Detergents-Determination of cationic-active matter content-High-molecular-mass cationic-active matter

IN-BIS, Primer quality

Military Standard of the People's Republic of China-General Armament Department, Primer quality

  • GJB 814.3-1996 Structural elements of fuze, shape and quality of warhead fuze for special ammunition
  • GJB 814.2-1993 Fuze structural elements, mortar warhead fuze shape and quality
  • GJB 814.1-1990 Shape and quality of warhead fuze for large-caliber artillery shells among fuze structural elements

RU-GOST R, Primer quality

  • GOST R 51005-1996 Transport services. Freight traffic. Quality index nomenclature
  • GOST R 51004-1996 Transport services. Passenger transportation. Quality index nomenclature
  • GOST 3040-1955 Grain. Methods for determination of quality
  • GOST R ISO 11465-2011 Soil quality. Determination of dry matter and water content on a mass by gravimetric method
  • GOST 4.253-1980 Product-quality index system. Beilding. Steel structures. Nomenclature of indixes
  • GOST R 50316-1992 Pulp. Determination of dry matter content
  • GOST 7824-1980 Vegetable oils. Methods for determination of phosphorated substances content
  • GOST R 52487-2005 Paint materials. Determination of non-volatile-matter mass fraction
  • GOST 4.399-1985 Production quality indexes system. Busses. Indexes nomenclature
  • GOST 10398-1976 Reagents and super pure substances. Complexonometric method for determination of basic matter content
  • GOST 27869-1988 High purity substances. Method for concentration of microimpurities by ion exchange
  • GOST 4.376-1985 Product-quality index system. Combination analogue electrical measuring instruments. Index nomenclature
  • GOST 31640-2012 Feeds. Methods for determination of dry matter content
  • GOST R 52838-2007 Feeds. Methods for determination of dry matter content
  • GOST ISO 520-2014 Cereals and pulses. Determination of the mass of 1000 grains
  • GOST 32990-2014 Solid biofuel. Determination of the content of volatile matter
  • GOST R 52487-2010 Paint materials. Determination of non-volatile-matter mass fraction
  • GOST 13586.1-1968 Grain. Methods of determination quantity and quality of gluten in wheat
  • GOST 4.6-1985 Quality rating system. Silk and half-silk. Fabrics for domestic use. Quality characteristic nomenclature
  • GOST 30704-2001 Wood protective substances. Quality testing methods
  • GOST 21119.1-1975 General methods of test for pigments and extenders. Determination of water and volatile matters mass fraction
  • GOST 29208.1-1991 Sodium chlorate for industrial use. Determination of mass fraction substances insoluble in water. Gravimetric method
  • GOST R ISO 22030-2009 Soil quality. Biological methods. Chronic phytotoxicity for higher plants
  • GOST R 54550-2011 Synthetic rubbers. Determination of the mass fraction of extractables
  • GOST 28862-1990 Rubber latices. Determination of total solids content
  • GOST 4.3-1978 Quality rating system. Cotton, and blended fabrics piece goods for domestic uses. Quality characteristics nomenclature

American Society for Testing and Materials (ASTM), Primer quality

  • ASTM A621/A621M-91 Standard Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled, -Drawing Quality
  • ASTM D5261-92(2009) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
  • ASTM D5261-92(2003) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
  • ASTM E595-93(1999) Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
  • ASTM E595-07 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
  • ASTM C1827-20 Standard Test Method for Determination of the Air-Entraining Admixture Demand of a Cementitious Mixture
  • ASTM E1756-95 Standard Test Method for Determination of Total Solids in Biomass
  • ASTM E1756-01 Standard Test Method for Determination of Total Solids in Biomass
  • ASTM F1011-86(1994)e1 Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel

AENOR, Primer quality

  • UNE-ISO 11465:2011 Soil quality -- Determination of dry matter and water content on a mass basis -- Gravimetric method
  • UNE 37219:1980 LEAD OXYDES. DETERMINATION OF WATER-SOLUBLE MATTER CONTENTS.
  • UNE 40228-7:1974 DETERMINATION OF THE CONTENT IN VEGETABEL MATTER ANDOF THE TOTAL OF INSOLUBLE IMPURITIES IN ALKALI OF WASHED WOOL SUBSAMPLES.
  • UNE 22010:1990 WINCH ENGINES TO 60 KN OF STRENGTH.
  • UNE-ISO 3951-2:2012 Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
  • UNE-EN ISO 520:2011 Cereals and pulses - Determination of the mass of 1000 grains (ISO 520:2010)
  • UNE-ISO 10473:2005 Ambient air -- Measurement of the mass of particulate matter on a filter medium -- Beta-ray absorption method

CH-SNV, Primer quality

British Standards Institution (BSI), Primer quality

  • BS 7961:2004 Specification for a device for measuring the static vertical mass (noseweight)at the coupling point of the towed vehicle
  • BS ISO 16620-4:2016 Plastics. Biobased content. Determination of biobased mass content
  • BS EN 15466-1:2009 Primers for cold and hot applied joint sealants - Part 1:Determination of homogeneity
  • BS ISO 15795:2002 Optics and photonics - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations
  • BS EN 60122-3:2011 Quartz crystal units of assessed quality. Standard outlines and lead connections
  • BS EN 60122-3:2010 Quartz crystal units of assessed quality. Standard outlines and lead connections
  • BS EN 60368-3:2010 Piezoelectric filters of assessed quality. Standard outlines and lead connections
  • BS ISO 16620-5:2017 Plastics. Biobased content. Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
  • BS PD CEN/TR 16721:2014 Bio-based products. Overview of methods to determine the bio-based content
  • BS EN ISO 15496:2004 Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control
  • BS EN ISO 15496:2018 Textiles. Measurement of water vapour permeability of textiles for the purpose of quality control
  • BS EN 13630-5:2004 Explosives for civil uses - Detonating cords and safety fuses - Determination of resistance to abrasion of detonating cords
  • BS ISO 28801:2011 Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
  • BS ISO 11262:2011 Soil quality. Determination of total cyanide
  • BS ISO 1272:2000 Essential oils. Determination of content of phenols
  • BS EN ISO 14240-1:2011 Soil quality. Determination of soil microbial biomass. Substrate-induced respiration method
  • BS ISO 19984-3:2017 Rubber and rubber products. Determination of biobased content - Biobased mass content
  • BS ISO 11349:2010 Water quality. Determination of low-volatility lipophilic substances. Gravimetric method
  • BS EN 60679-3:2013 Quartz crystal controlled oscillators of assessed quality. Standard outlines and lead connections
  • BS EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • BS EN 14907:2005(2010) Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • PD CEN/TS 17725:2022 Plant biostimulants. Determination of the quantity (indicated by mass or volume)
  • BS 2471:2005 Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area
  • BS PD CEN/TS 17201:2018 Construction products. Assessment of release of dangerous substances. Content of inorganic substances. Methods for analysis of aqua regia digests
  • PD CEN/TS 17773:2002 Organic and organo-mineral fertilizers. Determination of the dry matter content
  • BS EN ISO 23275-2:2006 Animal and vegetable fats and oils. Cocoa butter equivalents in cocoa butter and plain chocolate. Quantification of cocoa butter equivalents
  • BS EN ISO 23275-2:2008 Animal and vegetable fats and oils - Cocoa butter equivalents in cocoa butter and plain chocolate - Quantification of cocoa butter equivalents
  • BS EN 16785-1:2015 Bio-based products. Bio-based content. Determination of the bio-based content using the radiocarbon analysis and elemental analysis
  • BS EN 160200-2:1998 Harmonized system of quality assessment for electronic components - Sectional specification - Microwave modular electronic units of assessed quality - Index of test methods
  • BS EN ISO 9346:2007 Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary
  • 23/30445431 DC BS ISO 16620-4. Plastics. Biobased content - Part 4. Determination of biobased mass content
  • BS ISO 28592:2017 Tracked Changes. Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
  • BS EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - High-molecular-mass cationic-active matter

Association Francaise de Normalisation, Primer quality

  • NF ISO 15795:2002 Optique et photonique - Évaluation de la qualité des systèmes optiques - Estimation de la dégradation de la qualité de l'image due à des aberrations chromatiques
  • NF EN 16736:2015 Évaluation des risques sanitaires causés par les substances chimiques - Exigences relatives à la dispensation de formation
  • NF P98-871-1*NF EN 15466-1:2010 Primers for cold and hot applied joint sealants - Part 1 : determination of homogeneity
  • NF V03-702:1981 Cereals. Determination of the mass of 1000 grains.
  • NF P41-290:2008 Effect of materials on the quality of water intented for human consumption - Cytotoxicity measurement method.
  • NF V18-109*NF ISO 6496:2011 Animal feeding stuffs - Determination of moisture and other volatile matter content.
  • NF T90-461:2001 Water quality - Microbiology - Quality control of culture media.
  • NF T90-461/A1:2005 Water quality - Microbiology - Quality control of culture media.
  • NF T90-461/A2:2007 Water quality - Microbiology - Quality control of culture media.
  • FD T90-461:2022 Water quality - Microbiology - Quality control of culture media
  • NF F18-831:1992 Railway rolling stock. Rolling bearings for drives and traction motors. Quality requirements.
  • NF X31-202:1986 Soils quality - Test for the inhibition of plant growth by a substance
  • NF EN ISO 520:2011 Céréales et légumineuses - Détermination de la masse de 1000 grains
  • NF S96-900:2011 Quality of biological resource centres (BRCs) - Management system of a BRC and quality of biological resources.
  • XP X30-489:2013 Caractérisation des déchets - Détermination de la teneur en éléments et substances des déchets
  • NF E51-749:2007 Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in commercial buildings.
  • NF X31-407*NF ISO 11262:2012 Soil quality - Determination of total cyanide.
  • NF ISO 11262:2012 Qualité du sol - Dosage des cyanures totaux
  • NF T70-630-9*NF EN 13630-9:2004 Explosives for civil uses - Detonating cords and safety fuses - Part 9 : determination of transmission of detonation from detonating cord to detonating cord
  • NF X31-328*NF EN ISO 21479:2020 Soil quality - Determination of the effects of pollutants on soil flora - Leaf fatty acid composition of plants to assess soil quality
  • NF T90-721:2023 Qualité de l'eau - Encagement in situ de gammares pour la mesure de la bioaccumulation de substances chimiques
  • NF EN ISO 14240-1:2011 Qualité du sol - Détermination de la biomasse microbienne du sol - Partie 1 : méthode par respiration induite par le substrat
  • NF T73-320-1*NF EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1 : high-molecular-mass cationic-active matter.
  • NF T73-320:1994 Surface active agents. Detergents. Determination of cationic-active matter content. Part 1 : high-molecular-mass cationic-active matter.
  • XP U45-004*XP CEN/TS 17725:2022 Plant biostimulants - Determination of the quantity (indicated by mass or volume)
  • XP CEN/TS 17725:2022 Biostimulants des végétaux - Détermination de la quantité (exprimée en masse ou en volume)
  • NF EN 12880:2000 Caractérisation des boues - Détermination de la teneur en matière sèche et de la teneur en eau
  • NF X31-102*NF ISO 11465:1994 Soil quality. Determination of dry matter and water content on a mass basis. Gravimetric method.
  • NF S31-057:1982 Acoustics. Verification of the acoustic quality of buildings.
  • NF T43-104:1994 Rubbers, raw. Determination of volatile-matter content.
  • NF P50-743*NF EN ISO 9346:2007 Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary
  • NF D90-221:2002 Manufactured articles filled with feather and down - Method for the determination of a filled product's total mass and the mass of the filling.
  • FD S99-132:2000 Methodology for identification of quality and construction criteria, introduction and monitoring of indicators for health establishments
  • NF EN ISO 24032:2021 Qualité du sol - Encagement in situ d'escargots pour la mesure de la bioaccumulation de contaminants
  • NF X43-901:2008 Biomonitoring of air quality - Active biomonitoring of air quality by ray-grass : from crops to sample preparation
  • NF T70-630-5*NF EN 13630-5:2004 Explosives for civil uses - Detonating cords and safety fuses - Part 5 : determination of resistance to abrasion of detonating cords
  • XP U42-741*XP CEN/TS 17773:2022 Organic and organo-mineral fertilizers - Determination of the dry matter content
  • XP CEN/TS 17773:2022 Engrais organiques et organo-minéraux - Détermination de la teneur en matière sèche
  • NF X31-603:2004 Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials.
  • NF U42-405:1981 Compound mineral fertilizers. Homogeneity of a batch. Inspection method.
  • NF V05-222:1986 Instant coffee. Determination of insoluble matter content.
  • NF ISO 1887:1996 Verre textile - Détermination de la teneur en matières combustibles
  • NF EN ISO 11936:2023 Cuir - Détermination de la teneur totale en certains bisphénols
  • NF ISO 10473:2000 Air ambiant - Mesurage de la masse des matières particulaires sur un milieu filtrant - Méthode par absorption de rayons bêta
  • NF G06-017:1975 Quantitative chemical analysis of ternary mixtures of cotton, regenerated cellulose and protein substances.

CZ-CSN, Primer quality

  • CSN 73 1313-1968 Determination of air content in air-entrained concrete mixture
  • CSN 65 7084-1983 Water-soluble matters contalned in asphalts
  • CSN 58 0114-2001 Coffee extracts and chicory extracts - Determination of the caffeine content in decaffeinated coffee extracts - etermination of the dry matter content in dried extract - Determination of the dry matter content in liquid extract
  • CSN 64 0316-1984 Determination f volatile matter ontent
  • CSN 01 1323-1986 Quantities and units of heat transmission and transfer of matter
  • CSN 80 4202-1983 Household fabrics. Basic nomenclature of quality parameters
  • CSN 68 4150-1987 Detennination of content of substances cducing potassium permenganate

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Primer quality

  • GB/T 21575-2008 Dangerous goods.Test method of cap for extremely insensitive detonate substance (EIDS)
  • GB/T 21576-2008 Dangerous goods.Test method of gap for extremely insensitive detonate substance (EIDS)
  • GB/T 21577-2008 Dangerous goods.Test method of extremely insensitive detonate substance (EIDS)
  • GB/T 21625-2008 Dangerous goods.Bullet impact test method of extremely insensitive detonating substance
  • GB/T 21626-2008 Dangerous goods.External fire test method of extremely insensitive detonating substance
  • GB/T 21627-2008 Dangerous goods.Slow cook-off test of extremely insensitive detonating substance
  • GB 18421-2001 Marine biological quality
  • GB/T 4669-1995 Textiles--Woven fabrics--Determination of mass per unit length and mass per unit area
  • GB/T 13906-1992 Air quality.Determination of nitrogen oxides
  • GB/T 11901-1989 Water quality--Determination of suspended substance--Gravimetric method
  • GB 18668-2002 Marine sediment quality
  • GB/T 38529-2020 Requirements of concentration limits for restricted substances in tyres
  • GB/T 4669-2008 Textiles.Woven fabrics.Determination of mass per unit length and mass per unit area
  • GB/T 28489-2012 Limits of hazardous substances for musical instruments
  • GB 28489-2022 Limits of hazardous substances for musical instruments

National Metrological Technical Specifications of the People's Republic of China, Primer quality

  • JJF 1645-2017 In-house Preparation of Quality Control Materials(QCMs)

IX-ICAO, Primer quality

  • ICAO 9889-2007 Airport Air Quality Guidance Manual PRELIMINARY EDITION

HU-MSZT, Primer quality

ZA-SANS, Primer quality

US-FCR, Primer quality

PT-IPQ, Primer quality

KR-KS, Primer quality

  • KS I ISO 11465-2021 Soil quality — Determination of dry matter and water content on a mass basis — Gravimetric method
  • KS B ISO 15795-2023 Optics and optical instruments — Quality evaluation of optical systems — Assessing the image quality degradation due to chromatic aberrations
  • KS A ISO TR 16476-2018(2023) Reference materials — Establishing and expressing metrological traceability of quantity values assigned to reference materials
  • KS Q ISO 28801-2018 Double sampling plans by attributes with minimal sample sizes, indexed by producer''s risk quality(PRQ) and consumer''s risk quality(CRQ)
  • KS Q ISO 28592-2019 Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality(PRQ) and consumer's risk quality(CRQ)
  • KS I ISO 11262-2019 Soil quality ― Determination of total cyanide
  • KS C IEC 60368-3-2018 Piezoelectric filters of assessed quality — Part 3: Standard outlines and lead connections
  • KS C IEC 60368-3-2018(2023) Piezoelectric filters of assessed quality — Part 3: Standard outlines and lead connections
  • KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
  • KS L ISO 1887-2018 Textile glass — Determination of combustible-matter content
  • KS I ISO 10473-2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
  • KS Q ISO 3951-1-2019 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristi
  • KS C IEC 60122-3-2018 Quartz crystal units of assessed quality — Part 3: Standard outlines and lead connections
  • KS C IEC 60122-3-2018(2023) Quartz crystal units of assessed quality — Part 3: Standard outlines and lead connections

U.S. Military Regulations and Norms, Primer quality

RO-ASRO, Primer quality

  • STAS 8217-1984 COILED SPRINGS OF ROUND STEEL. FOR TRACTION Technical requirements for quality
  • STAS SR EN 20638-1995 Pulps - Determination of dry matter content
  • STAS 2213/17-1976 SWEETS Determination of total proteinic content and milk proteinic substance content
  • STAS 11062-1978 CARBON MASS FOR CONTINUOUS ELECTRODES Determination of volatile matter of the crude mass
  • STAS 11355-1985 Pneumatic power STRAIGHT MOTION ENGINES Special technical requirements for quality
  • STAS 10220-1975 ROLLER BEARINGS FOR ELECTROC TRACTION Special technical requrements for quality
  • STAS 12101/1-1992 Hidraulic fluid power. Orbital slow-speed engines Special technical requirements for quality
  • STAS SR 13327-1996 Air quality. Fallout. Determination of polonium 210 content
  • STAS 2211-1980 CALCULATION OF THE MASS OF HYGROSCOPIC MATERIALS AND PRODUCTSC
  • STAS 145/20-1988 VEGETABLE OILS AND FATS etermination of fat substances content
  • STAS 446/1-1984 I.EAD-ACIB TRACTION AND 'LIGHT1NG ACCUMULATORS General technical requirements for quality
  • STAS 12083-1982 HOUSEHOLD ARTICLES OF GLASS-CRYSTAL BLOWNWITH LEAD ' General technical requirements for quality
  • STAS SR ISO 9864:1996 Geotextiles Determination of mass per unit area
  • SR 7690-1993 Textiles. Determination of soluble bubstance content in organic solvents

IT-UNI, Primer quality

  • UNI 5747-1974 Draw-hooks for railway cars. Quality, requirements and tests.
  • UNI 3622-1955
  • UNI 3617-1955 Procedures for chemical analysis of minerals. Determination of arsenic in iron ore. Gravimetric method.
  • UNI 3664-1955 Procedures for chemical analysis of minerals. Determination of sulphur in iron ore. Gravimetric method.

Professional Standard - Electron, Primer quality

Group Standards of the People's Republic of China, Primer quality

ES-AENOR, Primer quality

Danish Standards Foundation, Primer quality

  • DS/ISO 4074/8:1987 Rubber condoms. Part 8: Determination of mass
  • DS/ISO 28801:2011 Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
  • DS/EN 15241/AC:2011 Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in buildings
  • DS/EN ISO 520:2011 Cereals and pulses - Determination of the mass of 1000 grains
  • DS/ISO 11262:2012 Soil quality - Determination of total cyanide
  • DS/EN ISO 14240-1:2011 Soil quality - Determination of soil microbial biomass - Part 1: Substrate-induced respiration method
  • DS/ISO 248:1981 Rubbers, raw. Determination of volatile matter content
  • DS/ISO 3951-2:2013 Sampling procedures for inspection by variables - Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
  • DS/ISO 11349:2011 Water quality - Determination of low-volatility lipophilic substances - Gravimetric method
  • DS/EN 60368-3:2011 Piezoelectric filters of assessed quality - Part 3: Standard outlines and lead connections
  • DS/EN 14907:2005 Ambient air quality - Reference gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • DS/EN 60122-3:2011 Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections

UY-UNIT, Primer quality

AT-ON, Primer quality

  • ONORM S 2022-1989 Quality requirements for waste-compost
  • ONORM EN 29002 Beib.1-1990 Quality Systems; modelfor quality assurance in production and Installation; trilingual index (de, en.fr) for ?NORM EN 29002
  • ONORM S 2200/A1-2000 Quality requirements for biowaste-compost (Amendment)
  • ONORM S 1403-1975 Textile floor coverings; determination of mass per piece, mass per unit length and mass per unit area
  • ONORM EN 29003 Beib.1-1990 Quality systems; model for quality assurance in final inspection and test; trilingual index (de, en,fr)for ONORM EN 29003
  • ONORM EN 29004 Beib.1-1990 Quality management and quality system elements; guidelines; trilingual index (de, en, fr)for ONORM EN 29004
  • ONORM M 9415 Teil.2-1991 Measuring technique — Measurement ofthe emission of substances into the atmosphere — Regulations for measuring
  • ONORM M 6272-1985 Water analysis; determination of the mass concentration of settleable matter in water and waste water
  • ONORM EN 20638-1994 Pulps. Determination of dry matter content (ISO 638:1978)
  • ONORM S 7008-1982 Testing of leather; determination of the contents of organic materials extractable by washing out (loss ofmass by washing out).
  • ONORM S 2200-1993 Quality requirements for biowaste-compost - Marking of conformity

Japanese Industrial Standards Committee (JISC), Primer quality

Taiwan Provincial Standard of the People's Republic of China, Primer quality

  • CNS 12680-4-1996 Quality Management and Quality Assurance Standards-Part 4:Guide to Dependability Programme Management

国家市场监督管理总局、中国国家标准化管理委员会, Primer quality

  • GB/T 38356-2019 Quality management—Guideline for customer-oriented innovation cycle
  • GB/T 39715.4-2021 Plastics—Biobased content—Part 4: Determination of biobased mass content

PH-BPS, Primer quality

  • PNS ISO/TR 16476:2021 Reference materials - Establishing and expressing metrological traceability of quantity values assigned to reference materials

Xinjiang Provincial Standard of the People's Republic of China, Primer quality

Professional Standard - Navy, Primer quality

  • HJB 351.6-2006 Quality control requirements for Russian underwater weapons Part 6: уэтт torpedo quality control requirements
  • HJB 351.1-2006 The Quality Control Requirements for Russian Underwater Weapons Part 1: 53—65кэ Torpedo Quality Control Requirements
  • HJB 351.5-2006 Quality control requirements for Russian underwater weapons Part 5: CэT—65кэ torpedo quality control requirements
  • HJB 351.2-2006 The Quality Control Requirements for Russian Underwater Weapons Part 2: TэC T—71M кэ Torpedo Quality Control Requirements
  • HJB 351.4-2006 Quality control requirements for Russian underwater weapons Part 4: Quality control requirements for C MдM self-propelled mines
  • HJB 351.3-2006 The Quality Control Requirements for Introducing Russian Underwater Weapons Part 3: The Quality Control Requirements for Mг—74 Submarine Simulator

VN-TCVN, Primer quality

  • TCVN 6648-2000 Soil quality.Determination of dry matter and water content on a mass basis.Gravimetric method
  • TCVN 4587-1988 Canned foods.Determination of mineral foreign matter content
  • TCVN 1272-1986 Reagents and super pura chemicals.Complexometric method for determination of basic matters content

CL-INN, Primer quality

Professional Standard - Agriculture, Primer quality

  • NY/T 1737-2009 Technical regulation of trial growing and characterization for introduced crop genetic resources
  • NY/T 251-1995 Determination of mass per unit area of sisal fabric

CO-ICONTEC, Primer quality

SE-SIS, Primer quality

YU-JUS, Primer quality

BE-NBN, Primer quality

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Primer quality

European Committee for Standardization (CEN), Primer quality

  • PD CEN/TR 16721:2014 Bio-based products - Overview of methods to determine the bio-based content
  • EN 15241:2007 Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in commercial buildings
  • EN ISO 20963:2011 Soil quality - Effects of pollutants on insect larvae (Oxythyrea funesta) - Determination of acute toxicity (ISO 20963:2005)
  • EN ISO 14240-1:2011 Soil quality - Determination of soil microbial biomass - Part 1: Substrate-induced respiration method (ISO 14240-1:1997)
  • EN 14907:2005 Ambient air quality Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • EN ISO 21479:2020 Soil quality - Determination of the effects of pollutants on soil flora - Leaf fatty acid composition of plants to assess soil quality (ISO 21479:2019)
  • FprCEN/TS 17725-2021 Plant biostimulants - Determination of the quantity (indicated by mass or volume)
  • PD CEN/TS 17201:2018 Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests
  • EN ISO 15496:2004 Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control
  • EN ISO/TR 15462:2009 Water quality - Selection of tests for biodegradability
  • FprCEN/TS 17773-2021 Organic and organo-mineral fertilizers - Determination of the dry matter content
  • CEN/TS 17773:2022 Organic and organo-mineral fertilizers - Determination of the dry matter content
  • EN ISO 15799:2022 Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials (ISO 15799:2019)
  • EN 20638:1993 Pulps - Determination of Dry Matter Content (ISO 638 : 1978)
  • EN 13630-7:2002 Explosives for civil use - Detonating cords and safety fuses - Part 7: Determination of the reliability of initiation of detonating cords
  • EN ISO 13088:2001 Manufactured Articles Filled with Feather and Down - Method for the Determination of a Filled Product´s Total Mass and of the Mass of the Filling

Professional Standard - Railway, Primer quality

  • TB/T 3328-2015 Portable power quality test equipment for traction substation
  • TB 10421-2003 Standard for constructional quality acceptance of railway electric traction feeding engineering
  • TB 10421-2018 Construction quality acceptance criteria for railway electric traction power supply engineering

SAE - SAE International, Primer quality

  • SAE EIA-765-A-2015 International and National Quality Standards Index (Formerly TechAmerica EIA-765-A)

未注明发布机构, Primer quality

  • BS 7961:2004(2009) Specification for a device for measuring the static vertical mass (noseweight) at the coupling point of a towed vehicle
  • DIN EN 160200-2:1998 Microwave modular electronic units of assessed quality — Part 2: Index of test methods

Lithuanian Standards Office , Primer quality

  • LST EN 15241-2007/AC-2011 Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in buildings
  • LST EN 14907-2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • LST EN ISO 520:2011 Cereals and pulses - Determination of the mass of 1 000 grains (ISO 520:2010)
  • LST ISO 10473:2001 Ambient air. Measurement of the mass of particulate matter on a filter medium. Beta-ray absorption method

CEN - European Committee for Standardization, Primer quality

  • EN ISO 15496:2018 Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control

Professional Standard - Environmental Protection, Primer quality

  • HJ 1222-2021 Gravimetric method for determination of moisture and dry matter content of solid waste
  • HJ/T 60-2000 Water quality.Determination of sulfides.Iodometric method

FI-SFS, Primer quality

PL-PKN, Primer quality

中华人民共和国环境保护部, Primer quality

  • GB 11901-1989 Water quality-Determination of suspended substance-Gravimetric method

Aerospace, Security and Defence Industries Association of Europe (ASD), Primer quality

Professional Standard - Machinery, Primer quality

  • JB/T 51075-1999 Product quality grading of machine-driven horizontal hay rakes (for internal use)
  • JB/T 53275-1999 Product Quality Classification of Centrifugal Induced Fans for Industrial Steam Boilers
  • JB/T 51227-1999 Product quality classification of traction floor scraper manure cleaner for chickens
  • JB/T 53285-1999 Product quality classification of power plant boiler centrifugal blower and induced draft fan

Association of German Mechanical Engineers, Primer quality

Professional Standard - Energy, Primer quality

农业农村部, Primer quality

GOSTR, Primer quality

  • GOST 27869-2019 High purity substances. Method for concentration of microimpurities by ion exchange

International Telecommunication Union (ITU), Primer quality

ES-UNE, Primer quality

  • UNE-CEN/TS 17725:2022 Plant biostimulants - Determination of the quantity (indicated by mass or volume) (Endorsed by Asociación Española de Normalización in May of 2022.)
  • UNE-EN ISO 18123:2016 Solid biofuels - Determination of the content of volatile matter (ISO 18123:2015)
  • UNE-EN 60368-3:2010 Piezoelectric filters of assessed quality -- Part 3: Standard outlines and lead connections (Endorsed by AENOR in March of 2011.)
  • UNE-EN ISO 22030:2011 Soil quality - Biological methods - Chronic toxicity in higher plants (ISO 22030:2005) (Endorsed by AENOR in August of 2011.)
  • UNE-CEN/TS 17773:2022 Organic and organo-mineral fertilizers - Determination of the dry matter content (Endorsed by Asociación Española de Normalización in May of 2022.)
  • UNE-EN 60122-3:2010 Quartz crystal units of assessed quality -- Part 3: Standard outlines and lead connections (Endorsed by AENOR in April of 2011.)

Beijing Provincial Standard of the People's Republic of China, Primer quality

  • DB11/T 387.3-2020 Water conservancy project construction quality assessment part 3: water diversion pipeline
  • DB11/T 387.3-2013 Water conservancy project construction quality assessment part 3: water diversion pipeline

Professional Standard - Textile, Primer quality

(U.S.) Ford Automotive Standards, Primer quality

TN-INNORPI, Primer quality

U.S. Environmental Protection Agency (U.S. EPA), Primer quality

GB-REG, Primer quality

Professional Standard - Business, Primer quality

Yunnan Provincial Standard of the People's Republic of China, Primer quality

North Atlantic Treaty Organization Standards Agency, Primer quality

  • STANAG 4107-2007 MUTUAL ACCEPTANCE OF GOVERNMENT QUALITY ASSURANCE AND USAGE OF THE ALLIED QUALITY ASSURANCE PUBLICATIONS (AQAP)

(U.S.) Parachute Industry Association, Primer quality

International Electrotechnical Commission (IEC), Primer quality

  • IEC 60368-3:2001 Piezoelectric filters of assessed quality - Part 3: Standard outlines and lead connections
  • IEC 60368-3:2010 Piezoelectric filters of assessed quality - Part 3: Standard outlines and lead connections

European Committee for Electrotechnical Standardization(CENELEC), Primer quality

  • EN 60122-3:2010 Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections

CENELEC - European Committee for Electrotechnical Standardization, Primer quality

  • EN 60122-3:2001 Quartz crystal units of assessed quality Part 3: Standard outlines and lead connections

ANSI - American National Standards Institute, Primer quality

  • N14.7-2013 Radioactive Materials - Guidance for Packaging Type A Quantities of Radioactive Materials (INMM)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved