ZH
RU
ES

Strength of k9 glass

Strength of k9 glass, Total:499 items.

In the international standard classification, Strength of k9 glass involves: Glass, Construction materials, Waxes, bituminous materials and other petroleum products, Insulating materials, Shipbuilding and marine structures in general, Protection against crime, Reinforced plastics, Bottles. Pots. Jars, Materials for the reinforcement of composites, Vocabularies, Pipeline components and pipelines, Ceramics, Analytical chemistry, Rubber and plastics products, Materials for aerospace construction, Road vehicle systems, Road engineering, Quality, Equipment for the chemical industry, Surface treatment and coating, Structure and structure elements, Thermodynamics and temperature measurements, Plastics, Interior finishing, Mechanical testing, Seagoing vessels, Raw materials for rubber and plastics, Water quality, Veterinary medicine, Fasteners, Aircraft and space vehicles in general, Installations in buildings.

British Standards Institution (BSI), Strength of k9 glass

BS EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Testing of channel shaped glass
BS EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Fundamentals of testing glass
BS ISO/TS 12928:1999 Glass in building. Determination of the bending strength of glass. Fundamentals of testing glass
14/30288714 DC BS EN ISO 1288-4. Glass in building. Determination of the bending strength of glass. Part 4. Testing of channel-shaped glass
14/30288705 DC BS EN ISO 1288-1. Glass in building. Determination of the bending strength of glass. Part 1. Fundamentals of testing glass
BS ISO 3342:2011 Textile glass. Mats. Determination of tensile breaking force
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Coaxial double ring test on flat specimens with small test surface areas
BS EN 1288-2:2000 Glass in building - Determination of the bending strength of glass - Coaxial double ring test on flat specimens with large test surface areas
18/30379293 DC BS ISO 22509. Glass in building. Heat strengthened soda lime silicate glass
BS EN 12603:2002 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
BS EN 12603:2003 Glass in building. Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
BS ISO 22314:2006 Plastics - Glass-fibre-reinforced products - Determination of fibre length
BS ISO 23013:2016 Road vehicles. Determination of resistance to forced entry of security glass constructions used in vehicle glazing. Test of glazing systems
23/30464394 DC BS ISO 22314. Plastics. Glass-fibre-reinforced products. Determination of fibre length
BS ISO 7685:2019 Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial ring stiffness
BS EN 2377:1989 Specification for glass fibre reinforced plastics - Test method - Determination of apparent interlaminar shear strength
14/30288711 DC BS EN ISO 1288-3. Glass in building. Determination of the bending strength of glass. Part 3. Test with specimen supported at two points (four-point bending)
BS ISO 16936-1:2020 Glass in building. Forced-entry security glazing - Test and classification by repetitive ball drop
BS ISO 11336-1:2012 Large yachts. Strength, weathertightness and watertightness of glazed openings. Design criteria, materials, framing and testing of independent glazed opening
BS ISO 11336-1:2023 Large yachts. Strength, weathertightness and watertightness of glazed openings - Design criteria, materials, framing and testing of independent glazed openings
BS ISO 3597-3:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of compressive strength
BS ISO 3597-2:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of flexural strength
BS ISO 3375:2009 Textile glass. Determination of stiffness of rovings
14/30288708 DC BS EN ISO 1288-2. Glass in building. Determination of the bending strength of glass. Part 2. Coaxial double-ring test on flat specimens with large test surface areas
BS EN 1447:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
BS EN 59:2016 Glass reinforced plastics. Determination of indentation hardness by means of a Barcol hardness tester
BS EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
BS EN ISO 11357-2:2014 Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature and glass transition step height
BS ISO 11357-2:2013 Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature and glass transition step height
18/30334470 DC BS ISO 11336-2. Large yachts. Strength, weathertightness and watertightness of glazed openings. Part 2. Glazed opening integrated into adjacent structure, (elastically bonded to bulkhead or shell), design criteria, structural support, installation and ...
BS EN 1394:1997 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the apparent initial circumferential tensile strength
19/30389925 DC BS ISO 8521. Glass-reinforced thermosetting plastic (GRP) pipes. Test methods for the determination of the initial circumferential tensile wall strength

Danish Standards Foundation, Strength of k9 glass

DS/INSTA 154:1987 Security glazings and safety glazings. Classification of resistance
DS/EN 1288-4:2001 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
DS/EN 1288-1:2001 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
DS/EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/EN 59:1978 Glass reinforced plastics. Measurement of hardness by means of a Barcol impressor
DS/EN 1288-2:2001 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
DS/EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
DS/EN 1288-5:2001 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
DS 1094.1:1983 Determination of cleanliness for sealed glazing units
DS/EN 2377:1989 Aerospace series. Glass fibre reinforced plastics. Test method. Determination of apparent interlaminar shear strenght
DS/EN 1394/AC:1998 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
DS/EN 1394:1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength

European Committee for Standardization (CEN), Strength of k9 glass

EN 1288-1:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 1: Fundamentals of Testing Glass
EN 1288-4:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 4: Testing of Channel Shaped Glass
EN 12603:2002 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
EN 59:1977 Glass Reinforced Plastics: Measurement of Hardness by Means of a Barcol Impressor
EN 1288-2:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 2: Coaxial Double Ring Test on Flat Specimens with Large Test Surface Areas
EN 1288-5:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 5: Coaxial Double Ring Test on Flat Specimens with Small Test Surface Areas
EN 60:1977 Glass Reinforced Plastics: Determination of the Loss on Ignition (Incorporates Amendment A1: 1978; Remains Current)
EN 60:1977/A1:1978 Glass reinforced plastics. Determination of the loss on ignition

Lithuanian Standards Office , Strength of k9 glass

LST EN 1288-4-2002 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
LST EN 1288-1-2002 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
LST EN 12603-2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
LST EN 59-2000 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
LST EN 1288-2-2002 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
LST EN 1288-5-2002 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
LST EN 2377-2001 Aerospace series - Glass fibre reinforced plastics - Test method - Determination of apparent interlaminar shear strength
LST EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
LST EN 1394+AC-2002 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength

AENOR, Strength of k9 glass

UNE-EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass.
UNE-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.
UNE-EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data.
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE-EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas.
UNE-EN 1288-2:2000 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas.
UNE-EN 2377:1993 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTIC. TEST METHOD. DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH.
UNE 43506:1985 TEXTILE GLASS. MATS OF TEXTILE GLASS. DETERMINATION OF AVERAGE THICKNESS, THICKNESS UNDER LOAD AND RECOVERY AFTER COMPRESSION
UNE-EN ISO 9163:2006 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
UNE-EN 1394:1997 PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE APPARENT INITIAL CIRCUMFERENTIAL TENSILE STRENGTH.

German Institute for Standardization, Strength of k9 glass

DIN EN 1288-4:2000-09 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass; German version EN 1288-4:2000 / Note: To be replaced by DIN EN ISO 1288-4 (2007-10).
DIN EN 1288-1:2000-09 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass; German version EN 1288-1:2000 / Note: To be replaced by DIN EN ISO 1288-1 (2007-10).
DIN EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass; German version EN 1288-4:2000
DIN EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass; German version EN 1288-1:2000
DIN EN 12603:2003-04 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data; German version EN 12603:2002
DIN 53766-1:1991 Testing of glass fibre reinforced plastics apparatus and containers; determination of adhesive strength
DIN EN 1288-2:2000 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas; German version EN 1288-2:2000
DIN EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas; German version EN 1288-5:2000
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN EN 59:2016-06 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; German version EN 59:2016
DIN EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data; German version EN 12603:2002
DIN 52230:2004 Determination of resistance to forced entry of safety glass constructions used in vehicle glazing - Test of glazing systems
DIN 61853-2:1987-04 Textile glass; textile glass mats for plastics reinforcement; classification and application
DIN 52313:1978 Testing of glass; determination of the resistance of glass products to thermal shock
DIN 53390:1988 Testing of glass fibre reinforced plastics; bending test on unidirectional glass fibre reinforced laminated plastics in the form of round bars
DIN 61853-1:1987-04 Textile glass; textile glass mats for plastics reinforcement; technical delivery conditions
DIN EN 2377:1989 Aerospace series; glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength; german version EN 2377:1989
DIN ISO 23013:2017-10 Road vehicles - Determination of resistance to forced entry of security glass constructions used in vehicle glazing - Test of glazing systems (ISO 23013:2016)
DIN 53769-1:1988-11 Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings
DIN EN 1288-5:2000-09 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas; German version EN 1288-5:2000 / Note: To be replaced by DIN EN ISO 1288-5 (2007-10).
DIN EN 1288-2:2000-09 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas; German version EN 1288-2:2000 / Note: To be replaced by DIN EN ISO 1288-2 (2007-10).
DIN 61853-2:1987 Textile glass; textile glass mats for plastics reinforcement; classification and application
DIN EN 59:1977 Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol Impressor
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN 28159 Bb.1:2006 Shaft end for externally coupled glass lined steel agitators - Dimensions - Supplement 1: Information concerning strength
DIN 61854-2:1987-04 Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; types
DIN 61853-1:1987 Textile glass; textile glass mats for plastics reinforcement; technical delivery conditions
DIN ISO 23013:2017 Road vehicles - Determination of resistance to forced entry of security glass constructions used in vehicle glazing - Test of glazing systems (ISO 23013:2016)
DIN EN 2377:1989-10 Aerospace series; glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength; german version EN 2377:1989
DIN 61854-2:1987 Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; types
DIN 61854-1:1987-04 Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; technical delivery conditions
DIN EN 17871:2022 Glass in building - Spectrophotometric characteristics of glass products - Validation procedure for calculation tool; German and English version prEN 17871:2022
DIN EN 17871:2022-12 Glass in building - Spectrophotometric characteristics of glass products - Validation procedure for calculation tool; German and English version prEN 17871:2022 / Note: Date of issue 2022-11-18
DIN EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005
DIN EN ISO 9163:2005-07 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005
DIN 12664-2:1981 Laboratory glassware; one-mark volumetric flasks, flasks with glass round thread
DIN 53766-1:2016 Testing of glass fibre reinforced plastics apparatus, containers and pipes - Part 1: Determination of traction adhesive strength
DIN 53766-1:2016-03 Testing of glass fibre reinforced plastics apparatus, containers and pipes - Part 1: Determination of traction adhesive strength
DIN 61854-1:1987 Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; technical delivery conditions
DIN 28159 Beiblatt 1:2006-12 Shaft end for externally coupled glass lined steel agitators - Dimensions - Supplement 1: Information concerning strength
DIN 53769-1:1988 Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings
DIN EN 1394:1996-12 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength; German version EN 1394:1996

未注明发布机构, Strength of k9 glass

JIS R 3111-4:2023 Glass in building -- Determination of the bending strength of glass -- Part 4: Testing of channel shaped glass
BS EN 2377:1989(2000) Glass fibre reinforced plastics — Test method — Determination of apparent interlaminar shear strength
JIS R 3111-5:2023 Glass in building -- Determination of the bending strength of glass -- Part 5: Coaxial double ring test on flat specimens with small test surface areas

PL-PKN, Strength of k9 glass

PN S13062-1966 Determina?ion of compressive s?reng?h of glass
PN W88059-1988 Toughened safety glass for side scuttles and windows

International Organization for Standardization (ISO), Strength of k9 glass

ISO 1288-4:2016 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
ISO 1288-1:2016 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
ISO 3605:1978 Textile glass reinforced plastics — Composites in the form of rods made from textile glass rovings — Determination of compressive strength
ISO/DIS 22314:2023 Plastics — Glass-fibre-reinforced products — Determination of fibre length
ISO/PRF 22314:2022 Plastics — Glass-fibre-reinforced products — Determination of fibre length
ISO 3605:1987 Textile glass; Rovings; Determination of compressive strength of rod composites
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
ISO 22314:2006 Plastics - Glass-fibre-reinforced products - Determination of fibre length
ISO 3597:1977 Textile glass reinforced plastics; Composites in the form of rods made from textile glass rovings; Determination of flexural (cross-breaking) strength
ISO 23013:2016 Road vehicles - Determination of resistance to forced entry of security glass constructions used in vehicle glazing - Test of glazing systems
ISO 1288-2:2016 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double-ring test on flat specimens with large test surface areas
ISO 1288-5:2016 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
ISO 3597-2:1993 Textile-glass-reinforced plastics; determination of mechanical properties on rods made of roving-reinforced resin; part 2: determination of flexural strength
ISO 3597-2:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2: Determination of flexural strength
ISO/FDIS 11336-1 Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1: Design criteria, materials, framing and testing of independent glazed openings
ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
ISO 718:1990 Laboratory glassware; thermal shock and thermal shock endurance; test methods
ISO 11336-1:2023 Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1: Design criteria, materials, framing and testing of independent glazed openings
ISO 1172:1975 Textile glass reinforced plastics; Determination of loss on ignition
ISO 9163:1996 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
ISO 11336-1:2012 Large yachts - Strength, weathertightness and watertightness of glazed openings - Part 1: Design criteria, materials, framing and testing of independent glazed openings
ISO 16936-1:2020 Glass in building — Forced-entry security glazing — Part 1: Test and classification by repetitive ball drop
ISO/DIS 20492-3:2023 Glass in buildings — Insulating glass — Part 3: Gas concentration and gas leakage
ISO 3342:1995 Textile glass - Mats - Determination of tensile breaking force
ISO 3342:2011 Textile glass - Mats - Determination of tensile breaking force
ISO 8513:2016 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the initial longitudinal tensile strength
ISO 8521:1998 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
ISO 3597-3:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3: Determination of compressive strength

Association Francaise de Normalisation, Strength of k9 glass

NF P78-341*NF EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1 : fundamentals of testing glass.
NF P78-344*NF EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4 : testing of channel shaped glass
NF P84-312:1981 Waterproofing . High-strength flexible reinforced bituminous covering with double fibreglass and fibreglass fabric reinforcement.
NF P78-401:1988 Glass and glazing. Glazing resistance to firearm projectiles. Shooting test on glazing.
NF EN 12603:2003 Verre dans la construction - Procédures de validité de l'ajustement et intervalles de confiance des données de résistance du verre au moyen de la loi de Weibull
NF P78-224*NF EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data.
NF B30-010:1967 Glass. Vocabulary of characteristic temperatures related to glass viscosities.
NF H35-078:2016 Bottling industry - Glass bottles for carbonated beverages - Mechanical strength
NF P84-311:1981 Waterproofing . Flexible reinforced bituminous covering with double fibreglass and fibreglass fabric reinforcement.
NF EN 59:2016 Matières plastiques renforcées de verre - Détermination de la dureté par pénétration au moyen d'un appareil d'essai de dureté Barcol
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF T57-106*NF EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
NF EN 17146:2018 Détermination de la résistance des supports de vitrage (panneaux de remplissage) - Méthode d'essai et exigences
NF P78-345*NF EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Part 5 : coaxial double ring test on flat specimens with small test surface areas.
NF P78-342*NF EN 1288-2:2000 Glass in building - Determination fo bending strength of glass - Part 2 : coaxial double ring test on flat specimens with large test surface areas
NF H35-078:1977 Bottling industry. Glass bottles. Containers for carbonated beverages. Strength requirements.
FD P78-468:2023 Verre dans la construction - Calculs des épaisseurs de vitrages - Compléments pour l'application de EN 16612 et EN 16613
NF P78-477-2:2023 Verre dans la construction - Calcul des températures des composants et des efforts dans les joints de scellement des vitrages isolants - Partie 2 : vitrages isolants verticaux de parois vitrées multiples
NF T57-160-2*NF ISO 3597-2:2004 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2 : determination of flexural strength.
NF P84-313:1987 Waterproofing. Bitumen felt with high strength glass-fibre base (type 36 S V.V- H.R.). Definition, specifications.
NF ISO 3597-3:2004 Plastiques renforcés verre textile - Détermination des propriétés mécaniques sur joncs de stratifils - Partie 3 : détermination de la résistance en compression
NF ISO 3597-2:2004 Plastiques renforcés verre textile - Détermination des propriétés mécaniques sur joncs de stratifils - Partie 2 : détermination de la résistance en flexion
NF P84-307:1981 Waterproofing . Bituminous felt with fibreglass fabric reinforcement.
NF ISO 4603:1996 Verre textile - Tissus - Détermination de l'épaisseur.
NF H35-078:2007 Bottling industry - Glass bottles - Containers for carbonated beverages - Mechanical strength requirements.
NF T57-106:1977 Glass reinforced plastics. Measurement of hardness by means of a barcol impressor .
NF B30-105:1972 Determination of annealing point and strain point of glass.
NF ISO 11336-1:2012 Grands yachts - Résistance, étanchéité aux intempéries et étanchéité à l'eau des ouvertures vitrées - Partie1 : critères de conception, matériaux, encadrement et essais des ouvertures vitrées indépendantes
NF T57-153:1973 PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. PREPARATION OF GLASS FIBRE REINFORCED,RESIN BONDED,LOW-PRESSURE LAMINATED PLATES OR PANELS FOR TEST PURPOSES.
NF L17-701*NF EN 2377:1989 Aerospace series. Glass fibre reinforced plastics. Test method. Determination of apparent interlaminar shear strength.
NF B38-153*NF EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings
NF J95-900-1*NF ISO 11336-1:2012 Large yachts - Strength, weathertightness and watertightness of glazed openings - Part 1 : design criteria, materials, framing and testing of independent glazed openings
NF T57-160-3:1994 TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 3 : DETERMINATION OF COMPRESSIVE STRENGTH.
NF T57-223*NF EN 1394:1996 Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination O the apparent initial circumferential tensile strength.
NF EN 1394:1996 Systèmes de canalisations en plastique - Tubes en plastiques thermodurcissables renforcés de verre (PRV) - Détermination de la résistance en traction circonférentielle initiale apparente
NF T57-160-3*NF ISO 3597-3:2004 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3 : determination of compressive strength

GM North America, Strength of k9 glass

GM GM9077P-1988 Glass Content of Glass Reinforced Plastics
GM GM9193P-1992 Procedure Determining the Bond Strength of Fiberglass
GM GMP.PP.019-1993 Polypropylene - 30% Glass Reinforced, Continuous Strand Sheet
GM GMP.UP.003-1993 Polyester SMC - Low Profile, 27.5% Glass Reinforced (Revision B)
GM GMP.UP.009-1993 Polyester SMC - Injection Molded, 22.5% Glass Reinforced
GM GMP.UP.014-2004 Polyester BMC - Injection Molded, 11% Glass Reinforced
GM GMP.UP.004-1993 Polyester SMC - Low Profile, 27.5% Glass Reinforced (Smooth) (Revision B)
GMP.PA66.070-1997 Nylon 66 - 25% Glass Sphere, 15% Glass Fiber Reinforced Revision B [Replaced: GMNA GMP.PA66.070R, GMNA GMP.PA66.070R]
GM 9986027-1993 SRIM, Woven and Chopped Fiberglass Mat Reinforcement
GM GMP.PA6.035-1999 Nylon 6 - 30% Mineral/10% Glass Reinforced, Heat Stabilized
GM GMP.PP.119-2002 Polypropylene 45% Glass/Mineral Reinforced, Sheet, ISO Tests
GM GMP.TPU.003-1992 Thermoplastic Polyurethane - 30% Glass and Mineral Reinforced

RU-GOST R, Strength of k9 glass

GOST 32281.1-2013 Glass in building. Determination of the bending strength of glass. Part 1. Fundamentals of testing glass
GOST 32298-2013 Glass and glass products. Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
GOST R 57963-2017 Hollow glass microspheres. Method for determination of compressive strength
GOST ISO 9385-2013 Glass and glass products. Hardness determination method
GOST 9900-1985 Inorganic glass and glasscrystal materials. Methods for the determination of elastic module at cross static bending
GOST 32281.2-2013 Glass and glass products. Determination of the bending strength. Coaxial double ring test on flat specimens with large test surface areas
GOST 32281.5-2013 Glass and glass products. Determination of the bending strength. Coaxial double ring test on flat specimens with small test surface areas
GOST 34261-2017 Glassfiber. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings
GOST R 56655-2015 Polymer composites. Method for determination of in-plane shear strength of pultruded glass-reinforced plastic rods
GOST 6943.13-2015 Textile glass. Determination of stiffness of roving
GOST 2888-1968 Veterinary maximum glass thermometer
GOST R 56653-2015 Polymer composites. Determination of shear strength of pultruded glass-reinforced plastic rods by the short-beam method
GOST R 54925-2012 Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Methods for determination of the apparent initial circumferential tensile strength

RO-ASRO, Strength of k9 glass

STAS 11268-1979 GLASS FIBRE REINFORCED PLASTICS Determination of tensile strength
STAS SR ISO 9385:1990
STAS 3834-1983 Laboratory glasswere NON GRADUATED GLASS TUBES
STAS 12664-1988 GLASS YARNS Determination of linear density
STAS 11337/1-1989 POLYESTER RESINS REINFORCED WITH GLASS FIBRES General specifications for strength determination at chemical agents action

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Strength of k9 glass

IPC TM-650 5.1.420-1975 Analysis of Glass Fabrics for Breaking Strength; (Tentative)

Professional Standard-Ships, Strength of k9 glass

CB 1200.2-1988 Strength Calculation of FRP Members Sandwich Panels
CB 1200.1-1988 Strength Calculation of FRP Components for Single-Story Structures

IT-UNI, Strength of k9 glass

UNI 5306-1963
UNI 7403-1975
UNI 5302-1963
UNI 5305-1963
UNI 7531-1976
UNI 5303-1973
UNI 7143-1972 Flat glass. Glass thickness for glazing to relation to their dimensions, wind loads and snow loads.

Korean Agency for Technology and Standards (KATS), Strength of k9 glass

KS M 3085-2014 Testing method for charpy impact strength of glass fiber reinforced plastics
KS M 3085-1994 Testing method for Charpy impact strength of glass fiber reinforced plastics
KS M 3084-2003 TESTING METHOD FOR LZOD IMPACT STRENGTH OF GLASS FIBER REINFORCED PLASTICS
KS M 3385-2004(2020) Testing method for transverse shear strength of glass fiber reinforced plastics
KS M 3084-1994 Testing method for lzod impact strength of glass fiber reinforced plastics
KS M 3384-2014 Testing method for apparent interlaminar shear strength of glass fiber reinforced plastics
KS M 3387-2016(2021) Testing method for Barcol hardness of glass fiber reinforced plastics
KS L ISO 9385-2010(2020) Testing method for knoop indentation hardness of glass and glass-ceramics
KS L 2102-2000 Testing method for knoop indentation hardness of glass and glass-ceramics
KS L 2102-1980 Testing method for knoop indentation hardness of glass and glass-ceramics
KS M 3387-2004 Testing method for Barcol hardness of glass fiber reinforced plastics
KS M 3839-2003 RECYCLED REINFORCED GLASS BEAD SYSTEM KITCHEN SHEETS
KS F 4802-2011(2016) Glassfiber-reinforced plastic corrugated sheets
KS M ISO 8521:2004 Plastics piping systems－Glass-reinforced thermosetting plastics(GRP) pipes－Determination of the apparent initial circumferential tensile strength
KS M ISO 8521:2022 Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength
KS M ISO 3597-2:2012 Textile-glass-reinforced plastics－Determination of mechanical properties on rods made of roving-reinforced resin－Part 2：Determination of flexural strength
KS L ISO 3375:2018 Textile glass — Determination of stiffness of rovings
KS L ISO 4603-2013(2018) Textile glass－Woven fabrics－Determination of thickness
KS V ISO 614-2012(2017) Shipbuilding and marine structures－Toughened safety glass panes for rectangular windows and side scuttles－Punch method of non-destructive strength testing
KS M ISO 3597-2-2012(2017) Textile-glass-reinforced plastics－Determination of mechanical properties on rods made of roving-reinforced resin－Part 2：Determination of flexural strength
KS M ISO 3597-3-2012(2017) Textile-glass-reinforced plastics－Determination of mechanical properties on rods made of roving-reinforced resin－Part 3：Determination of compressive strength
KS M 3381-2004 Testing method for tensile properties of glass fiber reinforced plastics
KS M ISO 3597-3:2022 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength
KS M ISO 3597-2:2022 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
KS A 0512-2009 Method of temperature measurement by liquid-in-glass thermometers
KS L ISO 3342:2013 Textile glass-Mats-Determination of tensile breaking force
KS L ISO 3342:2008 Textile glass-Mats-Determination of tensile breaking force
KS M ISO 3597-3:2012 Textile-glass-reinforced plastics-Determination of mechanical properties on rods made of roving-reinforced resin-Part 3:Determination of compressive strength

(U.S.) Ford Automotive Standards, Strength of k9 glass

FORD FLTM BN 151-05-2008 DETERMINATION OF 180 DEGREE PEEL ADHESION STRENGTH OF LAMINATES
FORD WSK-M4D708-A-1990 POLYAMIDE (PA) 6, 30% GLASS FIBER/GLASS SPHERE REINFORCED
FORD ESB-M11P27-A-1985 ADHESION REQUIREMENTS, ADHESIVE FOR BONDING FRP/FRP AND FRP/METAL
FORD ESE-M4D341-A1-1981 POLYESTER, THERMOPLASTIC - 30% GLASS REINFORCED
FORD FLTM BN 151-05-2001 DETERMINATION OF 180 DEGREE PEEL ADHESION STRENGTH OF LAMINATES Replaces FLTM EU-BN 051-05
FORD WSB-M18P16-A-1995 SEALING REQUIREMENTS, ANTI-FLUTTER, FOR ISOLATION OF FRP/FRP PANELS
FORD ESK-M4D498-A-1994 THERMOPLASTIC POLYURETHANE ELASTOMER, 20% GLASS FIBER - 67 DUROMETER D HARDNESS
FORD WSB-M11P27-B-2000 ADHESION REQUIREMENT, ADHESIVE FOR BONDING FRP/FRP AND FRP/PAINTED METAL PARTS ASSEMBLED AFTER VEHICLE ELECTROCOAT

ES-AENOR, Strength of k9 glass

国家市场监督管理总局、中国国家标准化管理委员会, Strength of k9 glass

GB/T 37781-2019 Test methods for bending strength of glass
GB/T 41063-2021 Textile glass—Determination of density
GB/T 39814-2021 Test method for impact strength of ultrathin glass—Ball drop method

CH-SNV, Strength of k9 glass

VSM 33715-1968

Professional Standard - Building Materials, Strength of k9 glass

JC/T 676-1997 Test method for flexure of glass material
JC/T 2285-2014 Test method for isostatic compression strength (microspheres-gas compression) for hollow glass microspheres

American Society for Testing and Materials (ASTM), Strength of k9 glass

ASTM C147-86(1995) Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM C147-86(2000) Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM C147-86(2020) Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM C700-07a Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
ASTM C700-07 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
ASTM C700-07e1 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
ASTM D3914-02(2008) Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
ASTM D3914-02(2016) Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D3102-78 Practice for Determination of Isostatic Collapse Strength of Hollow Glass Microspheres
ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-23 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM F428-19 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM C158-02(2017) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D3517-11 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D3517-14 Standard Specification for ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pressure Pipe
ASTM D2925-14(2019) Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
ASTM D2310-06(2012) Standard Classification for Machine-Made ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D3914-96 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
ASTM D3914-02 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
ASTM D4024-05 Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D4024-00 Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D4024-12 Standard Specification for Machine Made ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM C158-02(2012) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM F428-83(1997)e1 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-03 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-83(1997)e2 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-01 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM C1422-99(2005)e1 Standard Specification for Chemically Strengthened Flat Glass
ASTM C1422-99 Standard Specification for Chemically Strengthened Flat Glass
ASTM C1422-99(2005) Standard Specification for Chemically Strengthened Flat Glass
ASTM C1422/C1422M-20 Standard Specification for Chemically Strengthened Flat Glass
ASTM C1422/C1422M-20a Standard Specification for Chemically Strengthened Flat Glass
ASTM C1422/C1422M-15 Standard Specification for Chemically Strengthened Flat Glass
ASTM F1642-04 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
ASTM F1642-03 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
ASTM D5685-05 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM D2997-01 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2997-99 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2997-01(2007)e1 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2997-15 Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D29-98 Standard Specification for Centrifugally Cast "Fibreglass" (Glass Fiber Reinforced Thermosetting Resin) Pipe
ASTM D5421-00 Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D5421-93 Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D5421-05(2010) Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D2997-21 Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2996-17 Standard Specification for Filament-Wound &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5421-15 Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D5685-11 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM D4024-22 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D4024-15 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM F2686-10 Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe
ASTM F2686-14 Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe
ASTM C1666/C1666M-07 Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
ASTM C1666/C1666M-08 Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
ASTM C1666/C1666M-08(2015) Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
ASTM D3753-19 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells
ASTM D5421-05 Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D3840-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
ASTM D5421-23 Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM D3753-20 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells
ASTM D3839-14 Standard Guide for Underground Installation of ldquo;Fiberglassrdquo; 40;Glass-Fiber Reinforced Thermosetting-Resin41; Pipe
ASTM F734-95 Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
ASTM F734-17 Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
ASTM C1720-17e1 Standard Test Method for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses
ASTM C1720-17 Standard Test Method for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses
ASTM D3839-14(2019) Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
ASTM D2924-12(2017) Standard Test Method for External Pressure Resistance of &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D3753-99 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
ASTM C1355/C1355M-96(2006) Standard Specification for Glass Fiber Reinforced Gypsum Composites
ASTM C147-86(2005) Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM C147-86(2015) Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM D3840-10 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
ASTM D3840-14 Standard Specification for ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pipe Fittings for Nonpressure Applications
ASTM C1720-21 Standard Test Methods for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses
ASTM D3982-98 Standard Specification for Contact Molded "Fiberglass" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods
ASTM D3982-21 Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts
ASTM D2515-66 Standard Specification For Kinematic Glass Viscometers
ASTM D1155-03 Standard Test Method for Roundness of Glass Spheres
ASTM D1155-89(1994)e1 Standard Test Method for Roundness of Glass Spheres
ASTM D1155-10(2020) Standard Test Method for Roundness of Glass Spheres
ASTM D1155-10(2015) Standard Test Method for Roundness of Glass Spheres
ASTM D1155-10 Standard Test Method for Roundness of Glass Spheres
ASTM D3841-97(2008)e1 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
ASTM D3841-16 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
ASTM C1720-11 Standard Test Method for Determining Liquidus Temperature of Immobilized Waste Glasses and Simulated Waste Glasses
ASTM D5365-06 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-01 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-99 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D5365-01e1 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D3754-11 Standard Specification for x201C;Fiberglassx201D; (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ASTM D3754-14 Standard Specification for ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Sewer and Industrial Pressure Pipe
ASTM D5365-12 Standard Test Method for Long-Term Ring-Bending Strain of ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2924-12(2023) Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM F734-17(2022) Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
ASTM D5365-23 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM C829-81(2005) Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method

Japanese Industrial Standards Committee (JISC), Strength of k9 glass

JIS K 7058:1995 Testing method for transverse shear strength of glass fiber reinforced plastics
JIS K 7062:1992 Testing method for izod impact strength of glass fiber reinforced plastics
JIS K 7061:1992 Testing method for charpy impact strength of glass fiber reinforced plastics
JIS K 7057:1995 Testing method for apparent interlaminar shear strength of glass fiber reinforced plastics
JIS K 7060:1995 Testing method for barcol hardness of glass fiber reinforced plastics
JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)
JIS A 5350:1991 Fiberglass reinforced plastic mortar pipes
JIS K 7095:2012 Testing method for glass transition temperatures of carbon fibre reinforced plastics by thermal analysis
JIS F 0303:1992 Ships made of fibreglass reinforced plastics -- Design of earth
JIS K 7051:1987 General rules for testing methods of glass fiber reinforced plastics
JIS Z 8705:1992 Method of temperature measurement by liquid-in-glass thermometers
JIS R 3224-3:2018 Glass in buildings -- Insulating glass -- Part 3: Gas concentration and gas leakage
JIS K 7053:1987 Measuring method for void content of glass fiber reinforced plastics
JIS K 7056:1995 Testing method for compressive properties of glass fiber reinforced plastics
JIS A 5350 AMD 1:2006 Fiberglass reinforced plastic mortar pipes (Amendment 1)
JIS A 5712:1994 Glass fiber reinforced plastic bathtubs connected with floor

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Strength of k9 glass

GB/Z 21213-2007 High strength laminated sheet based on halongen-free flame-resistant resins and glass cloth
GB/T 1450.1-1983 Test method for interlaminar shear strength of glass fiber-reinforced plastics
GB/T 15231.2-1994 Test methods for the properties of glass fibre reinforced cement. The compressive strength
GB/T 42923-2023 Determination of fiber length of glass fiber reinforced plastic products
GB/T 1450.2-1983 Test method for the punch-type of strength of glass fiber-reinforced plastics
GB/T 7991.9-2014 Test method of viterous and porcelain enamels.Part 9:Determination of adhesion tensile strength
GB/T 15231.1-1994 Test methods for the properties of glass fibre reinforced cement. The volume density, water content and glass fibre content
GB/T 4944-1996 Test method for interlaminar tensile strength of glass fiber reinforced plastic laminates
GB/T 13096.3-1991 Test method for inplane shear strength of pultruded glass fiber reinforced plastic rods
GB/T 4944-2005 Test method for interlaminar tensile strength of glass fiber reinforced plastic laminates
GB/T 20310-2006 Textile glass.Rovings.Manufacture of test specimens and determination of tensile strength of impregnated rovings
GB/T 14208-1993 Textile glass--Rovings--Determination of flexural strength of rod composites
GB/T 14209-1993 Textile glass--Rovings--Determination of compressive strength of rod composites
GB/T 6579-2007 Laborator glassware.Thermal shock and thermal shock endurance test methods
GB/T 7689.1-2001 Reinforcements--Test method for woven fabrics Part 1: Determination of thickness for glass fibre
GB/T 13096.4-1991 Test method for apparent horizontal shear strength of pultruded glass fiber reinforced plastic rods by the short-beam method
GB/T 14208.2-2009 Textile-glass-reinforced plastics.Determination of mechanical properties on rods made of roving-reinforced resin.Part 2:Determination of flexural strength
GB/T 14208.3-2009 Textile-glass-reinforced plastics.Determination of mechanical properties on rods made of roving-reinforced resin.Part 3:Determination of compressive strength

Professional Standard - Electron, Strength of k9 glass

SJ/T 11041-1996 Test method for impact resistance of electronic glass
SJ/T 11034-1996 Test method for DC disruptive strength of electronic glass

CZ-CSN, Strength of k9 glass

CSN 70 0556-1962 Testing of glass containers. Determination of thickness of glass
CSN 25 8141-1972 Glass thermometers. Laboratory glass thermometers with conical ground glass joint
CSN 25 8140-1965 Laboratory glass thermometers with tra- versable scale
CSN 25 8134-1965 Glass thermometers. Laboratory glass thermometers with fine scale

American National Standards Institute （ANSI), Strength of k9 glass

ANSI/TAPPI T1009 om-2010 Tensile strength and elongation at break for fiber glass mats
ANSI/TAPPI T1013 om-2010 Loss on ignition of fiber glass mats
ANSI/ASTM D2997:2015 Standard Specification for Centrifugally Cast ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ANSI/ASTM D3839:2014 Standard Guide for Underground Installation of ��Fiberglass�� (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
ANSI/ASTM D5421:2005 Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ANSI/ASTM D5421:2015 Standard Specification for Contact Molded ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ANSI/ASTM D3840:2014 Standard Specification for ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
ANSI/ASTM D3567:1997 Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ANSI/ASTM D4161:2006 Specification For "fiberglass" Glass-fiber-reinforced Thermosetting-resin Pipe Joints Using Flexible Elastomeric Seals
ANSI/ASTM D6041:2012 Specification for Contact-Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

U.S. Military Regulations and Norms, Strength of k9 glass

ARMY MIL-PRF-46197 A-1997 LAMINATE: HIGH-STRENGTH GLASS, FABRIC- REINFORCED, POLYESTER RESIN PREIMPREGNATED

International Federation of Trucks and Engines, Strength of k9 glass

NAVISTAR CEMS DT-8-2004 Glass Content of Reinforced Plastics

FI-SFS, Strength of k9 glass

Taiwan Provincial Standard of the People's Republic of China, Strength of k9 glass

CNS 12782-1990 Method of Test for Apparent Interlaminal Shear Strength of Glass Fiber Reinforced Plastics
CNS 13762-2004 Tempered glass 360°retroreflective roadmarkers
CNS 12785-1990 Method of Test for Barcol Hardness of Glass Fiber Reinforced Plastics

AT-ON, Strength of k9 glass

ONORM EN 59-1978 Glass reinjorced plastics. Measu.rem.ent of hardness by means of a barcol-impressor
ONORM EN 60-1978 Glass reinforced plastics. Determination of the loss on ignition.
ONORM B 3721-1997 Plate glass for building and construction - Calculation of thickness of plate glass for four-sided supported vertical rectangular panes

Society of Automotive Engineers (SAE), Strength of k9 glass

SAE AMS3601D-1992 Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3601D-2004 Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3601E-2011 Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3315F-1991 Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced
SAE AMS3666D-1993 Polytetrafluoroethylene (PTFE) Sheet, Glass Cloth Reinforced
SAE AMS3315G-2012 Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced
SAE AMS3666E-2012 Polytetrafluoroethylene (PTFE) Sheet, Glass Cloth Reinforced
SAE AMS3831A-1992 Cloth, Type
SAE AMS3831A-1997 Cloth, Type “E” Glass, “B” Stage Epoxy-Resin-Impregnated 7781 Style Fabric, Flame Resistant, Improved Strength

Military Standard of the People's Republic of China-General Armament Department, Strength of k9 glass

GJB 1798A-2020 Test method for pressure failure strength of aircraft glass
GJB 1798-1993 Test method for static pressure damage resistance of aircraft glass
GJB 1797-1993 Test method for pressure difference strength of aircraft electrically heated glass under temperature difference

SE-SIS, Strength of k9 glass

SIS SS 16 84 05-1982 Glass reinforced plastics - Measurement of hardness by means of a Barcol im pressor
SIS SS 78 08 27-1983 Shipbuilding - Toughened safety glass panes for ships' rectangular windows
SIS SS 22 41 44-1984 Textile glass - Woven fabrics - Deter- mination of width and length

ES-UNE, Strength of k9 glass

UNE-EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
UNE-EN 1394/AC:1998 PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE APPARENT INITIAL CIRCUMFERENTIAL TENSILE STRENGTH.

未注明发布机构, Strength of k9 glass

JIS R 3111-4:2023 Glass in building -- Determination of the bending strength of glass -- Part 4: Testing of channel shaped glass
BS EN 2377:1989(2000) Glass fibre reinforced plastics — Test method — Determination of apparent interlaminar shear strength
JIS R 3111-5:2023 Glass in building -- Determination of the bending strength of glass -- Part 5: Coaxial double ring test on flat specimens with small test surface areas

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Strength of k9 glass

GJB 5872-2006 Test method for laminar shearing strength of stretched acrylic plastic

HU-MSZT, Strength of k9 glass

National Aeronautics and Space Administration (NASA), Strength of k9 glass

NASA UFGS-06 71 33-2011 FIBERGLASS REINFORCED PLASTIC (FRP) LADDERS

SAE - SAE International, Strength of k9 glass

SAE J1882-1994 METHOD FOR EVALUATING THE CLEAVAGE STRENGTH OF STRUCTURALLY BONDED FIBERGLASS REINFORCED PLASTIC (WEDGE TEST)
SAE J1882-1987 METHOD FOR EVALUATING THE CLEAVAGE STRENGTH OF STRUCTURALLY BONDED FIBERGLASS REINFORCED PLASTIC (WEDGE TEST)
SAE AMS3831B-2016 Cloth@ Type “E” Glass@ “B” Stage Epoxy-Resin-Impregnated 7781 Style Fabric@ Flame Resistant@ Improved Strength

GM Europe, Strength of k9 glass

GME QK 000152-1983 Polyamid 11, glasfaserverst鋜kt Polyamide 11, Glass Fibre Reinforced German
GME QK 000682-1987 PEEK, glasfaserverst鋜kt PEEK, reinforced with Glass Fibre German
GME QK 001186-1985 Polyamid 66, elastomermodifiziert und glasfaserverst?rkt Polyamide 66, Elastomer Modified and Reinforced with Glass Fibre
GME QK 001127-1998 Polyamide 66 Reinforced with Glass Fibres (English/German)
GME QK 001311-2001
GME QK 000214-1983 Polycarbonat (PC) - Folie, glasfaserverst鋜kt Polycarbonate (PC) - Foil, Reinforced with Glass Fibres German
GME QK 001046-1990 Polypropylen, glasfaserverst鋜kt Polypropylene, Reinforced with Glass Fibres English/German
GME QK 001805-2003 Polypropylen, verst鋜kt mit Glasfasern Polypropylene, Reinforced with Glass Fibres English/German
GME TM 570300-1986 Polyurethan-Hartschaum mit Glasfaserverst鋜kung Polyurethane-Hard Foam with Glass Fibre Reinforcement German

American Society of Civil Engineers (ASCE), Strength of k9 glass

ASCE 52-10-2010 Design of Fiberglass- Reinforced Plastic (FRP) Stacks

KR-KS, Strength of k9 glass

KS M ISO 8521-2022 Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength
KS L ISO 3375-2018 Textile glass — Determination of stiffness of rovings
KS L ISO 3375-2018(2023) Textile glass — Determination of stiffness of rovings
KS V ISO 11336-1-2023 Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1: Design criteria, materials, framing and testing of independent glazed openings
KS M ISO 3597-2-2022 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
KS M ISO 3597-3-2022 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength
KS L ISO 4603-2013(2023) Textile glass－Woven fabrics－Determination of thickness

GOSTR, Strength of k9 glass

GOST R 57730-2017 Polymer composites. Determination of fibre length in the glass-fibre-reinforced products

NZ-SNZ, Strength of k9 glass

AS/NZS 3572.21:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 21: Method for the Determination of the Shear Strength of a Sandwich Panel
AS/NZS 3572.19:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 19: Method for the Determination of the Lap Shear Strength of Laminate

BELST, Strength of k9 glass

STB 51.2.06-2005 Equipment and hardware for bank activity support. High-strong glass. General specifications

BE-NBN, Strength of k9 glass

NBN S 22-016-1985 Textile glass - Woven fabric - Determination of width and 1
NBN S 22-011-1985 Textile glass products - Determination of moisture content
NBN S 22-011-1976 Glass fibres - Determination of the moisture content
NBN S 22-004-1988 Textile glass - Continuous filament yarns, staple fibre yarns, textured yarns and rovings (packages) -Determination of linear density

NO-SN, Strength of k9 glass

NS 5509-1978 Thermometers - Glass inserts for industrial thermometers
NS 9512-1985 Plastics - Glass reinforced materials - Determination of tensile properties

GB-REG, Strength of k9 glass

REG NASA-STD-5018-2011 STRENGTH DESIGN AND VERIFICATION CRITERIA FOR GLASS, CERAMICS, AND WINDOWS IN HUMAN SPACE FLIGHT APPLICATIONS

Professional Standard - Aerospace, Strength of k9 glass

QJ 1853-1990 Test method for tensile strength of glass/phenolic, high silica/phenolic molded products
QJ 2618-1994 Specifications for large-height glass fiber reinforced plastic honeycomb sandwich structures

工业和信息化部, Strength of k9 glass

JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method

TR-TSE, Strength of k9 glass

TS 3426-1979 TEXTILE GLASS-WOVEN FABRICS-DETERMINATION OF THICK NESS
TS 3427-1979 TEXTILE CLASS-WOVEN FABRIC-DETERMINATION OP WIDTH AND LENGTH

Military Standards (MIL-STD), Strength of k9 glass

DOD A-A-53976-1989 THERMOMETER, SELF-INDICATING, LIQUID IN GLASS

IN-BIS, Strength of k9 glass

IS 6274-1971

United States Navy, Strength of k9 glass

NAVY MIL-P-17549 D VALID NOTICE 1-1989 PLASTIC LAMINATES, FIBROUS GLASS REINFORCED, MARINE STRUCTURAL
NAVY MIL-P-17549 D-1981 PLASTIC LAMINATES, FIBROUS GLASS REINFORCED, MARINE STRUCTURAL

Standard Association of Australia （SAA）, Strength of k9 glass

AS/NZS 3572.22:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of hardness by means of a Barcol impressor