ZH
RU
ES
Method for Determination of Melting Point of Metals
Method for Determination of Melting Point of Metals, Total:499 items.
In the international standard classification, Method for Determination of Melting Point of Metals involves: Welding, brazing and soldering, Testing of metals, Analytical chemistry, Pesticides and other agrochemicals, Crude petroleum, Coals, Plastics, Non-ferrous metals, Photography, Meat, meat products and other animal produce, Equipment for the metallurgical industry, Organic chemicals, Physics. Chemistry, Corrosion of metals, Edible oils and fats. Oilseeds, Waxes, bituminous materials and other petroleum products, Products of the chemical industry, Paint ingredients, Test conditions and procedures in general, Protective equipment, Powder metallurgy, Ferroalloys, Protection against fire, Products of the textile industry, Cereals, pulses and derived products, Tea. Coffee. Cocoa, Sugar. Sugar products. Starch, Chocolate, Adhesives, Dentistry, Fuels, Iron and steel products, Electrical wires and cables, Metalliferous minerals, Non-destructive testing, Surface treatment and coating, Ferrous metals, Nuclear energy engineering, Power stations in general, Linear and angular measurements, Pipeline components and pipelines, Air quality, Motor cycles and mopeds, Metrology and measurement in general, Mechanical testing, Cans. Tins. Tubes, Acoustics and acoustic measurements, Chipless working equipment, Non-metalliferous minerals, Insulating materials, Rubber, Production of metals, Materials for the reinforcement of composites, Inorganic chemicals, Water quality, Construction materials, Wood technology processes, Fruits. Vegetables, Processes of the textile industry.
未注明发布机构, Method for Determination of Melting Point of Metals
- BS 4633 & 04634:1970(2011) Method for The determination of crystallizing point Method for The determination of melting point and / or melting range
- BS 6693-2:1986(1999) Diffusible hydrogen — Part 2 : Method for determination of hydrogen in manual metal - arc weld metal
- BS 3338-20:1970(2011) Method for The determination of nickel in capping metal (Photometric method) — Methods for the sampling and analysis oftin and tin alloys
- BS 6648:1986(1999) Methods for Wet ashing of textile materials for subsequent determination of metal content
IN-BIS, Method for Determination of Melting Point of Metals
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Method for Determination of Melting Point of Metals
- GB/T 3965-1995 Methods for determination of diffusible hydrogen in deposited metal
- GB/T 3965-2012 Determination of diffusible hydrogen in deposited metal
- GB/T 1602-2001 Testing method of melting point for pesticides
- GB/T 2559-1981 Lignite wax--Determination of melting point
- GB/T 14235.1-1993 Surface roughness for plastic parts
- GB/T 6843-1986 Method for determining the coating melting point of photographic materials
- GB 6843-1986 Determination method of melting point of photosensitive material coating
- GB/T 18590-2001 Corrosion of metals and alloys--Evaluation of pitting corrosion
- GB/T 3249-1982 Standard method for determination of particle size of powders of refractory metals and compounds--Fisher method
- GB/T 8360-1987 The lattice constant determination of metals--Method of X-ray diffractometer
- GB/T 617-1988 Chemical reagent--General method for the determination of melting range
- GB/T 617-2006 Chemical reagent General method for the determination of melting range
- GB/T 1425-1996 Determination of melting temperature range for precious metals and their alloys--Testing method of thermal analysis
- GB/T 2384-2015 Dyes intermediates.General method for the determination of melting range
- GB/T 2384-1992 Dye intermediates general method for the determination of melting range
- GB/T 2384-2007 Dyes intermediates.General method for the determination of melting range
- GB/T 11409.1-1995 Test method of fusion point for rubber antiagers and vulcanizing accelerators
- GB/T 26050-2010 Hardmetals.Determination of contents of metallic elements by X-ray fluorescence.Fusion method
- GB/T 15078-2008 Testing method for contact resistance of precious metals electrical contact materials
- GB/T 15078-1994 Measuring method for contact resistance of precious metal electrical contact materials
- GB/T 7124-1986 The method for determination of strength properties of adhesive in shear by tension loading(Metal to metal)
- GB/T 12778-2008 Determination of Charpy impact fracture surface for metallic materials
- GB/T 12778-1991 Metallic materials--Determination of Charpy impact fracture surface
- GB/T 41706-2022 Metallic powders—Test method for determination of non-metallic inclusions in metal powders for powder forging
- GB/T 13353-1992 Test method for resistance of adhesive bonds to chemical reagents—Metal to metal
- GB/T 9735-1988 Chemical reagent--General method for the determination of heavy metals
- GB/T 9735-2008 Chemical reagent.General method for the determination of heavy metals
- GB/T 12605-2008 Non-destructive testing.Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes
- GB/T 8654.7-1988 Methods for chemical analysis of manganese metal--The potentiometric titration method for the determination of manganese content
- GB 10267.2-1988 Analytical methods for metallic calcium - Photometric determination of trace amounts of silicon
- GB/T 10267.2-1988 Method for analysis of calcium metal--The determination of micro-amounts of silicon by photometric method
- GB/T 16480.5-1996 Method for chemical analysis of yttrium and yttium oxide--Determination of nitrogen content
- GB/T 6526-1986 Self-fluxing alloy powders--Determination of solidus-liquidus temperature range
- GB/T 15072.10-2008 Test method of precious metal alloys.Determination of nickel content for gold alloys.Complexometric backing titration using EDTA
- GB/T 15072.9-2008 Test method of precious metal alloys.Determination of indium content for gold alloys.Complexometric return titration using EDTA
- GB/T 17473.3-2008 Test method of precious metals pastes used for microelectronics.Determination of sheet resistance
- GB/T 12496.22-1999 Test methods of wooden activated carbon-Determination of heavy metals
- GB/T 24172-2009 Method for evaluation of tensile properties of metallic superplastic materials
- GB/T 10430-1989 Standard test method for binding strength of sintered metal friction elements
- GB/T 43112-2023 Rate jump method for measuring elastic modulus of metallic materials
- GB/T 4702.6-1984 Methods for chemical analysis of chromium metal--The EDTA volumetric method for the determination of aluminum content
- GB/T 4702.4-1984 Methods for chemical analysis of chromium metal--The EDTA volumetric method for the determination of iron content
- GB/T 12690.13-1990 Neodymium and samarium--Determination of carbon content--High frequency--Infrared absorption method
- GB/T 13747.22-1992 Zirconium and zirconium alloys--Determination of oxygen content--Inert gas fusion coulometric method
- GB/T 15072.1-1994 Gold,palladium alloys.Determination of gold content
- GB/T 15072.18-1994 Gold alloys-Determination of iron content
- GB/T 15072.19-1994 Gold alloys-Determination of chromium content.
- GB/T 15072.20-1994 Gold alloys-Determination of zirconium content
- GB/T 15072.9-1994 Gold alloys-Determination of indium content
- GB/T 15072.10-1994 Gold alloys-Determination of nickel content
- GB/T 15072.11-1994 Gold alloys-Determination of gadolinium content
- GB/T 15072.7-1994 Gold alloys-Determination of chromium content
- GB/T 8654.11-1988 Methods for chemical analysis of manganese metal--The combustion-neutralization titration method for the determination of sulfur content
- GB/T 4702.17-1988 Methods for chemical analysis of chromium metal--The combustion-neutralization titration method for the determination of sulfur content
- GB 4702.17-1988 Methods for chemical analysis of chromium metal－The combustion-neutralization titration method for the determination of sulfur content
- GB/T 3850-2015 Impermeable sintered metal materials and hardmetals.Determination of density
- GB/T 3850-1983 Impermeable sintered metal materials and hardmetals--Determination of density
- GB/T 15072.5-2008 Test method of precious metal alloys.Determination of silver content for gold and palladium alloys.Potentionmeter titration with potassium iodide
- GB/T 8654.5-1988 Methods for chemical analysis of manganese metal--The molybdenum blue photometric method for the determination of phosphorus content
- GB/T 11211-1989 Rubber vulcanized--Determination of adhesion to metal--Tension method
- GB/T 10562-1989 Metallic material--Standard test method for the extra-low expansion coefficient--Light interferometer method
- GB/T 4702.12-1987 Methods for chemical analysis of chromium metal--The oscilloplarographic method for the determination of bismuth content
- GB/T 4702.13-1987 Methods for chemical analysis of chromium metal--The oscilloplarographic method for the determination of lead content
- GB/T 4702.3-1984 Methods for chemical analysis of chromium metal--The molybdenum blue photometric method for the determination of phosphorus content
- GB/T 8654.3-1988 Methods for chemical analysis of manganese metal--The molybdenum blue photometric method for the determination of silicon content
- GB/T 30799-2014 The test method of food detergents.Determination of heavy metals
- GB/T 31850-2015 Test method for thermogravimetry(TG) of no-matallic sealing materials
- GB/T 23950-2009 Inorganic chemicals for industrial use.General method for determination of heavy metals
- GB/T 30810-2014 Test methods for leachable ions of heavy metals in cement mortar
- GB/T 15072.16-1994 Gold alloys-Determination of copper and manganese contents
- GB/T 15072.5-1994 Gold,Palladium alloys-Determination of silver content
- GB/T 15072.1-2008 Test method of precious alloys.Determination of gold content for gold ,platinum and palladium alloys.Potentiometric titration using ferrous sulfate
- GB/T 17473.3-1998 Test methods of precious metal pastes used for thick film microelectronics--Determination of sheet resistance
- GB/T 15072.2-2008 Test method of precious metal alloys.Determination of silver contents for silver alloys.Potentionmeter titration with sodium chloride
- GB/T 15072.17-1994 Platinum alloys-Determination of tungsten content
- GB/T 15072.12-1994 Silver alloys-Determination of vanadium content
- GB/T 15072.13-1994 Silver alloys-Determination of cerium content
- GB/T 15072.2-1994 Silver alloys-Determination of silver content
- GB/T 15072.14-1994 Silver alloys-Determination of aluminium content
- GB/T 15072.8-1994 Gold,Palladium and silver alloys-Determination of copper content
- GB/T 15072.3-1994 Gold,platinum and palladium alloys-Determination of platinum content
- GB/T 8654.8-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of carbon content
- GB/T 8654.10-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of sulfur content
- GB/T 10267.1-1988 Method for analysis of calcium metal--The determination of chlorine content by chloride--Selective electrode
- GB/T 4702.14-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of carbon content
- GB/T 4702.16-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of sulfur content
- GB 10267.1-1988 Analytical method for calcium metal Determination of chlorine by chloride ion selective electrode method
- GB 4702.14-1988 Metal Chromium Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
- GB/T 17473.2-2008 Test method of precious metals pastes used for microelectronics.Determination of fineness
- GB/T 17473.5-2008 Test method of precious metals pastes used for microelectronics.Determination of viscosity
- GB/T 15072.3-2008 Test method of precious metal alloys.Determination of platinum content for gold,platinum and palladium alloys.Electricity titration using potassium permanganate
- GB/T 15072.4-1994 Palladium,silver alloys-Determination of palladium content
- GB/T 15072.6-1994 Platinum,Palladium alloys-Determination of iridium content
- GB/T 41079.2-2022 Test methods for physical properties of liquid metals—Part 2: Determination of electrical conductivity
Japanese Industrial Standards Committee (JISC), Method for Determination of Melting Point of Metals
- JIS Z 3113:1975 Method for measurement of hydrogen evolved from deposited metal
- JIS Z 3184:2003 Method of preparing deposited metal pad and samples for chemical analysis
- JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
- JIS Z 2504:2012 Metallic powders -- Determination of apparent density
- JIS H 7101:1989 Method for determining the transformation temperatures of shape memory alloys
- JIS Z 2504:1979 Method for determination of apparent density of metal powders
- JIS Z 2504:2000 Metallic powders -- Determination of apparent density -- Funnel method
- JIS H 7151:1991 Method of determining the crystallization temperatures of amorphous metals
- JIS K 0083:1997 Method for determination of metals in flue gas
- JIS K 0083:2006 Methods for determination of metals in flue gas
- JIS K 0083:2017 Methods for determination of metals in flue gas
- JIS Z 2505:1989 Method for determination of density of metal powder sintered materials
- JIS H 7804:2005 Method for particle size determination in metal catalysts by electron microscope
- JIS K 0553:1995 Testing methods for determination of metallic elements in highly purified water
- JIS K 0553:2002 Testing methods for determination of metallic elements in highly purified water
- JIS Z 2271:2010 Metallic materials -- Uniaxial creep testing in tension -- Method of test
- JIS G 1322-1:2010 Method for chemical analysis of metallic silicon -- Part 1: Methods for determination of silicon content
- JIS G 1321-2:2009 Method for chemical analysis of manganese metal -- Part 2: Methods for determination of silicon content
- JIS G 1321-3:2009 Method for chemical analysis of manganese metal -- Part 3: Method for determination of phosphorus content
- JIS G 1321-5:2009 Method for chemical analysis of manganese metal -- Part 5: Methods for determination of iron content
- JIS G 1321-4:2009 Method for chemical analysis of manganese metal -- Part 4: Methods for determination of sulfur content
- JIS G 1322-3:2010 Method for chemical analysis of metallic silicon -- Part 3: Methods for determination of phosphorus content
- JIS G 1322-4:2010 Method for chemical analysis of metallic silicon -- Part 4: Methods for determination of sulfur content
- JIS G 1322-7:2010 Methods for chemical analysis of metallic silicon -- Part 7: Methods for determination of calcium content
- JIS G 1322-5:2010 Methods for chemical analysis of metallic silicon -- Part 5: Methods for determination of iron content
- JIS G 1322-6:2010 Methods for chemical analysis of metallic silicon -- Part 6: Methods for determination of aluminium content
- JIS G 1322-2:2010 Method for chemical analysis of metallic silicon -- Part 2: Methods for determination of carbon content
国家市场监督管理总局、中国国家标准化管理委员会, Method for Determination of Melting Point of Metals
- GB/T 39137-2020 Determination for the orientation of refractory metal single crystal
- GB/T 40320-2021 Measuring method for mechanical melting temperature of aluminum alloy
- GB/T 40403-2021 Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
- GB/T 1425-2021 Determination of melting temperature range for precious metals and their alloys—Testing method of thermal analysis
- GB/T 2384-2021 Dyes intermediates—General method for the determination of melting range
- GB/T 15078-2021 Testing method for contact resistance of precious metals electrical contact materials
- GB/T 41079.1-2021 Test methods for physical properties of liquid metals—Part 1: Determination of density
British Standards Institution (BSI), Method for Determination of Melting Point of Metals
- BS 4633 and 4634:1970 Method for the determination of crystallizing point. Method for the determination of melting point and/or melting range
- BS 4695:1980 Method for determination of melting point of petroleum wax (cooling curve)
- BS ISO 16540:2015 Corrosion of metals and alloys. Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
- BS 4790:1987 Method for determination of the effects of a small source of ignition on textile floor coverings (hot metal nut method)
- BS DD CEN/TS 15412:2006 Solid recovered fuels - Methods for the determination of metallic aluminium
- BS DD CEN/TS 15412:2010 Solid recovered fuels - Methods for the determination of metallic aluminium
- BS 6810:1987 Methods for determination of metals in textiles
- 22/30419358 DC BS ISO 4905. Corrosion of metals and alloys. Electrochemical test methods. Guideline for electrochemical measurements in high temperature molten salts
- BS 6729:1987 Method for determination of the dynamic fracture toughness of metallic materials
- DD CEN/TS 15412:2006 Solid recovered fuels — Methods for the determination of metallic aluminium
- DD CEN/TS 15412:2010 Solid recovered fuels. Methods for the determination of metallic aluminium
- BS EN ISO 4524-6:1989 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Determination of the presence of residual salts
- BS ISO 23721:2022 Corrosion of metals and alloys. Rating method by appearance of rust and stains of atmospheric corrosion for stainless steels
- BS ISO 13947:2011 Metallic powders. Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
- BS 3338-19:1966 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of zinc in solders and white metal bearing alloys (photometric method)
- BS 2000-133:1993 Methods of test for petroleum and its products - Determination of drop melting point of wax and petrolatum
- BS EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density
- BS 3338-20:1970 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of nickel in capping metal (photometric method)
- BS ISO 17245:2015 Corrosion of metals and alloys. Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions
- BS EN ISO 4524-6:1995 Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Determination of the presence of residual salts
- 20/30391743 DC BS ISO 23721. Corrosion of metals and alloys. Rating method by appearance of rust and stains of atmospheric corrosion for stainless steels
- BS 6648:1986 Methods for wet ashing of textile materials for subsequent determination of metal content
- BS 6200 SubSec.3.31.2:1992 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tin. Ferrotungsten and tungsten metal: volumetric method
Professional Standard - Agriculture, Method for Determination of Melting Point of Metals
- GB 1602-1979 Method for Determination of Melting Point of Pesticides
- GB 617-1988 General method for determination of melting point range of chemical reagents
- GB 9735-1988 General method for the determination of heavy metals in chemical reagents
American Society for Testing and Materials (ASTM), Method for Determination of Melting Point of Metals
- ASTM E1941-98 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
- ASTM E1941-04 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
- ASTM D5440-93(2003) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D5440-93(1997) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D5440-93(2009) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D5440-17(2021) Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM D5440-17 Standard Test Method for Determining the Melting Point of Fats and Oils
- ASTM E1447-22 Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry
- ASTM F205-94(2005) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
- ASTM D5399-95(2000) Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
- ASTM D5399-04(2009) Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
- ASTM B504-90(2011) Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
- ASTM G74-13(2021) Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
- ASTM E82-91(1996) Standard Test Method for Determining the Orientation of a Metal Crystal
- ASTM E82-91(2007) Standard Test Method for Determining the Orientation of a Metal Crystal
- ASTM E82/E82M-14(2019) Standard Test Method for Determining the Orientation of a Metal Crystal
- ASTM E82/E82M-14 Standard Test Method for Determining the Orientation of a Metal Crystal
- ASTM E82-09 Standard Test Method for Determining the Orientation of a Metal Crystal
- ASTM B890-07(2012) Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- ASTM E2792-11 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
- ASTM E2448-22 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
- ASTM B890-07 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- ASTM F205-94(2010)e1 Standard Test Method for Measuring Diameter of Fine Wire by Weighing
- ASTM E2575-19 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys by Inert Gas Fusion
- ASTM E2792-21 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
Korean Agency for Technology and Standards (KATS), Method for Determination of Melting Point of Metals
- KS B 0826-2001 Destructive tests on welds in metallic materials-Hardness testing-Part 1:Hardness test on arc welded joints
- KS B 0826-1985 Destructive tests on welds in metallic materials-Hardness testing-Part 1:Hardness test on arc welded joints
- KS B 0821-2007 Methods of tension and impact tests for deposited metal
- KS B 0821-1982 Methods of tension and impact tests for deposited metal
- KS M 2740-1-2005 Petroleum waxes－Determination of melting point(cooling curve)
- KS B 0524-1994 Methods of measurement for ferrite content in austenitic stainless steel deposited metal
- KS D 1756-2009(2019) Methods for determination of lead in zinc metal
- KS D ISO 4503-2003(2018) Hardmetals－Determination of contents of metallic elements by X-ray fluorescence－Fusion method
- KS D ISO 4503:2003 Hardmetals-Determination of contents of metallic elements by X-ray fluorescence-Fusion method
- KS D 1758-2015 Method for determination of tin in zinc metal
- KS D 1757-2009(2019) Methods for determination of cadmium in zinc metal
- KS D 0058-2004 Method for determining the transformation temperature of shape memory alloys
- KS D 0289-2009 Test methods for determination of resistance to pitting and crevice corrosion of metallic materials for surgical implants
- KS D 0069-2002 Method of determining the crystallization temperatures of amorphous metals
- KS D 0036-2001 METHOD FOR DETERMINATION OF APPARENT DENSITY FOR METAL POWDERS
- KS B 0823-1977(1995) METHOD FOR MEASUREMENT OF HYDROGEN EVOLVED FROM DEPOSITED METAL
- KS I 3203-2007(2012) Testing methods for determination of metallic elements in highly purified water
- KS D 0036-1985 METHOD FOR DETERMINATION OF APPARENT DENSITY FOR METAL POWDERS
- KS B 0823-1977 METHOD FOR MEASUREMENT OF HYDROGEN EVOLVED FROM DEPOSITED METAL
- KS D 1777-2011 General rules for determination of hydrogen in metallic materials
- KS D 1780-2011 General rules for determination of carbon in metallic materials
- KS D 1779-2011 General rules for determination of sulfur in metallic materials
- KS D 1778-2008 General rules for determination of oxygen in metallic materials
- KS D 0069-2002(2022) Method of determining the crystallization temperatures of amorphous metals
- KS D 0289-2018 Test methods for determination of resistance to pitting and crevice corrosion of metallic materials for surgical implants
- KS D ISO 13947:2012 Metallic powders-Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
- KS D ISO 13947:2013 Metallic powders－Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
- KS K 0731-2007 Test method for the determination of extractable heavy metals in textiles
- KS M 0073-1997
- KS D 0033-2001(2021) Method for determination of density of metal powder sintered materials
- KS I 3203-2021 Testing methods for determination of metallic elements in highly purified water
- KS D ISO 3369:2011 Impermeable sintered metal materials and hardmetals-Determination of density
- KS D ISO 3369:2015 Impermeable sintered metal materials and hardmetals－Determination of density
- KS I 3203-2007 Testing methods for determination of metallic elements in highly purified water
- KS D 0050-2010 Method for determination of intercommunicating porosity of sintered metal,oil impregnated
- KS D ISO 3923-2-2001(2011) Method for determination of apparent density of metal powers－Scott volumeter method
- KS D 0240-2010 Measuring methods for electrical resistivity and conductivity of non-ferrous metals
- KS K 0731-2017 Test method for the determination of extractable heavy metals in textiles
Professional Standard - Chemical Industry, Method for Determination of Melting Point of Metals
CZ-CSN, Method for Determination of Melting Point of Metals
- CSN 42 0617 Cast.1-1988 Chemical analysis of non-ferrous metals and alloys. Alloys meltable at low temperature. Determination of bismuth and lead by titrimetric method
- CSN 42 0617 Cast.3-1988 Chemical analysis of non-ferrous metals and alloys. Alloys meltable at low temperature. Determination of lead by the atomic absorption method
- CSN 42 0617 Cast.2-1988 Chemical analysis of non-ferrous metals and alloys. Alloys meltable at low temperature. Determination of bismuth by the atomic absorption method
- CSN 58 8754-1994 Methods of test for fats and oils etermination of melting point by clearing
- CSN 42 0617 Cast.4-1988 Chemical analysis of non-ferrous metals and alloys. Alloys meltable at low temperature. Determination of tin by the titrimetric method and atomic absorption method
- CSN 42 0617 Cast.5-1988 Chemical analysis of non-ferrous metals and alloys. alloys meltable at low temperature. Determination of cadmium by the polarographic method and atomic absorption method.
- CSN 42 0617 Cast.6-1988 Chemical analysis of non-ferrous metals and alloys. Alloys meltable at low temperature. Determination of antimony by the titrimetric method and atomic absorption method
- CSN 03 8153-1980 Corrosion of metals. Metallic and non-metallic inorganic coatings on alloys of iron. Methods for determination of degree of rust penetration through tne coating
- CSN 65 1025 Cast.6-1989 Sulphuric acid for industrial use. ethods for the determination f heavy metals
- CSN 65 2063-1981 SODIUM HYDROXIDE TECHNXCAL Methods for Datorminatioii of Hoavy Metals
- CSN 42 0890 Cast.13-1984 Testing of metallic powders. Determination of particle size by microscopic method
- CSN 65 6075-1984 Petroloum products. Test methods for etermination of corrosive action n metale
- CSN 03 8158-1985 Protection acrainst corrosion. Metallic and non-metallic unorganic coatings. Method of determination of reflectivity
Association Francaise de Normalisation, Method for Determination of Melting Point of Metals
- NF EN 24503:1993 Métaux-durs - Dosage des éléments métalliques par fluorescence de rayons X - Méthode par fusion.
- NF T20-051:1985 Chemical products for industrial use. Determination of melting point. Method for the determination of cristallizing point (freezing point).
- NF A81-307:1977 WELDING PROCESS WITH WIRE ELECTRODE. PREPARATION OF AN ALL WELD METAL SAMPLE FOR MEASURING DIFFUSIBLE HYDROGEN.
- NF A05-521*NF ISO 16540:2015 Corrosion of metals and alloys - Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
- NF S74-503:1992 Protective clothing. Test method : determination of behaviour of materials onimpact of small splashes of molten metal.
- NF A95-491*NF EN 24503:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method.
- NF A95-490*NF EN 24883:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Solution method.
- NF A89-217:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds.
- NF A91-124:2002 Revêtements métalliques - Galvanisation par immersion dans le zinc fondu (galvanisation à chaud) - Méthodes d'essai d'adhérence
- FD T90-012:2021 Water quality - Determination of metal content - Method for the measurement of metal concentration with passive sampling by diffusive gradient in thin films
- NF T58-110:1971 Plastics materials. Surface coating of metals. Plastics coatings. Methods of thickness determination.
- FD ISO/TR 17276:2014 Cosmétiques - Approche analytique des méthodes de détection et de quantification des métaux lourds dans les cosmétiques
RU-GOST R, Method for Determination of Melting Point of Metals
- GOST 25183.6-1982 Photographic gelatine. Method of determination of melting temperature
- GOST 7122-1981 Weld seams and all-weld metal. Methods of sample selection for determination of chemical composition
- GOST 13020.5-1985 Metallic chrome. Method for determination of silicon
- GOST 13020.7-1985 Metallic chrome. Methods for determination of nitrogen
- GOST 13020.8-1985 Metallic chrome. Methods for determination of iron
- GOST 13020.12-1985 Metallic chrome. Method for determination of arsenic
- GOST 13020.13-1985 Metallic chrome. Method for determination of antimony
- GOST 13020.15-1985 Metallic chrome. Methods for determination of tin
- GOST 13020.16-1985 Metallic chrome. Method for determination of cobalt
- GOST 23338-1991 Welding of metals. Methods for determination of diffusible hydrogen in deposited weld metal and fused metal
- GOST 23870-1979 Weldability of steels. Test method for evalution of fusion welding effect on parent metal
- GOST 13020.1-1985 Metallic chrome. Method for determination of chrome
- GOST 13020.4-1985 Metallic chrome. Method for determination of phosphorus
- GOST 17319-1976 Reagents. Methods for the determination of heavy metals
- GOST 5901-2014 Sonfectionery. Methods for determination of ash and metal magnetic admixture mass fraction
- GOST 16698.12-1984 Metallic manganese and nitrated metallic manganese. Method for determination of calcium and magnesium
- GOST 13020.6-1985 Metallic chrome. Method for determination of total aluminium
- GOST 9012-1959 Metals. Method of Brinell hardness measurement
- GOST 13020.11-1985 Metallic chrome. Methods for determination of zink, lead and bismuth
- GOST 12573-2013 Sugar. Method for determination of ferrous foreign matters
- GOST R 51736-2001 Dental ceramic fused to metal restorative materials. Technical requirements. Test methods
- GOST 16698.7-1971 Metallic mangenese and nitrated manganese. Methods for the determination of nickel
- GOST 16698.9-1971 Metallic manganese and nitrated manganese. Methods for the determination of copper
- GOST 16698.11-1971 Metallic manganese and nitrated manganese. Method for the determination of titanium
- GOST 28800-1990 Metal pipes. Method for determination of moisture on the internal surface of pipes
- GOST R 55120-2012 Solid recovered fuels. Methods for the determination of metallic aluminium
- GOST 8.398-1980 State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification
- GOST R 50573-1993 Metal forging machines. Noise characteristics and methods of their determination
- GOST 22975-1978 Metals and alloys. Rockwell hardness test under low loads (using Super-Rockwell test)
- GOST 13170-1980 Ores and concentrates of non-ferrous metals. Method for determination of moisture content
- GOST 13340.2-1977 Dried vegetables. Methods of determination of metal impurities and pests of cereal stocks
AR-IRAM, Method for Determination of Melting Point of Metals
Professional Standard - Ferrous Metallurgy, Method for Determination of Melting Point of Metals
- YB/T 5098-2007 1,8-Naphthalic anhydride
- YB/T 5098-1993 Method for Determination of Melting Point of 1,8-Naphthalic Anhydride
- YB/T 5337-2006 Determination method of metal lattice constant X-ray diffractometer method
- YB/T 5148-1993 Method for determination of average grain size of metals
- YB/T 4188-2015 Test method for the content of magnetic metallic iron in steel slag
- YB/T 4188-2009 Determination method of magnetic metal iron content in steel slag
- YB/T 4227-2010 Determination method of metal content in stainless steel slag
- YB/T 148-1998 Standard test method for the content of metallic iron in steel slag used in cement
Military Standard of the People's Republic of China-General Armament Department, Method for Determination of Melting Point of Metals
- GJB 772.110-1991 Explosives Test Methods Melting Point Determination Capillary Method
- GJB 770.204-1994 Test methods for gunpowder analysis - Determination of content of metals and metal compounds - Complexometric titration method
International Organization for Standardization (ISO), Method for Determination of Melting Point of Metals
- ISO 16540:2015 Corrosion of metals and alloys - Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
- ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
- ISO 4503:1978 Hardmetals; Determination of contents of metallic elements by X-ray fluorescense; Fusion method
- ISO/R 615:1967 Methods for determining the mechanical properties of the weld metal deposited by electrodes 3,15 mm or more in diameter
- ISO/R 615:1968 Method for determination of mechanical properties of weld metal deposited by electrodes of 3.15 mm diameter or larger
- ISO 13947:2007 Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
- ISO 13947:2011 Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
- ISO/CD 13947:2023 Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
- ISO/DIS 13947:2022 Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
- ISO 3369:2006 Impermeable sintered metal materials and hardmetals - Determination of density
Professional Standard - Machinery, Method for Determination of Melting Point of Metals
- JB/T 6820-1993 Test method of thermal electromotive force for refractory metal thermocouple wire
- JB/T 8630-1997 Test method of determining melting heat, melting point and crystallization heat and crystallizing point of electrical insulation materials with differential scanning calorimetric method
GOSTR, Method for Determination of Melting Point of Metals
- GOST 18995.4-1973 Organic chemical products. Methods for determination of melting point interval
- GOST 17319-2019 Reagents. Methods for determination of heavy metals
- GOST 5901-1987 Confectionery. Methods for determination of ash and metallomagnetic admixture content
FI-SFS, Method for Determination of Melting Point of Metals
SG-SPRING SG, Method for Determination of Melting Point of Metals
- SS 11 Pt.16-1986 Methods Of Sampling And Test For Oils And Fats Part 16 : Determination Of Melting Point (Slip Point)
Anhui Provincial Standard of the People's Republic of China, Method for Determination of Melting Point of Metals
- DB34/T 3254-2018 Recovery of precious metal smelting slag Bismuth oxychloride Chemical analysis method Determination of gold and silver content Fire assay gold method
Group Standards of the People's Republic of China, Method for Determination of Melting Point of Metals
- T/QGCML 159-2021 Calibration method of helmet splash resistance molten metal splash tester
- T/CSTM 00753-2023 Metallic materials—Determination of argon content—Inert gas fusion mass spectrometric method
YU-JUS, Method for Determination of Melting Point of Metals
- JUS ISO 4503:1991 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method
- JUS N.R4.495-1990 Electromechanical components for electronic equipment. Test methods. Test 12a: Solderability, vvetting, solder bath method
- JUS C.A1.380-1988 Methods of chemical analysis of zine powder. Determination of metalic zine content. Volumetric me-thod
Danish Standards Foundation, Method for Determination of Melting Point of Metals
- DS/EN 24503:1994 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method
- DS/ISO 4503:1994 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method
- DS/EN 348+AC:1994 Protective clothing - Test method: Determination of behaviour of materials on impact of small splashes of molten metal
- DS/CEN/TS 15412:2010 Solid recovered fuels - Methods for the determination of metallic aluminium
Taiwan Provincial Standard of the People's Republic of China, Method for Determination of Melting Point of Metals
- CNS 12996-1992 Method of Determination for Contents of Metallic Elements of Hardmetals by X-Ray Fluorescence (Fusion Method)
Professional Standard - Non-ferrous Metal, Method for Determination of Melting Point of Metals
- YS/T 368-2015 Test method of thermo-emf for noble metal thermocouple wires.Fuse wire
- YS/T 121.2-1992 Heat Balance Test and Calculation Method of Resistance Melting Furnace in Non-ferrous Metal Processing Enterprises
- YS/T 121.3-1992 Heat Balance Test and Calculation Method of Induction Melting Furnace in Non-ferrous Metal Processing Enterprises
- YS/T 372.7-2006 Methods for elementary analysis of precious alloy. Determination of cobalt content. EDTA complexometric titration
- YS/T 372.9-2006 Methods for elementary analysis of precious alloy. Determination of nickel content.EDTA complexometric titration
- YS/T 372.11-2006 Methods for elementary analysis of precious alloy.Determination of magnesium content.EDTA complexometric titration
- YS/T 372.12-2006 Methods for elementary analysis of precious alloy.Determination of zinc content.EDTA complexometric titration
- YS/T 372.13-2006 Methods for elementary analysis of precious alloy. Determination of tin content. EDTA complexometric titration
- YS/T 372.16-2006 Methods for elementary analysis of precious alloy. Determination of gallium content. EDTA complexomeric titration
- YS/T 372.21-2006 Methods for elementary analysis of precious alloy. Determination of zirconium content. EDTA complexometric titration
- YS/T 372.22-2006 Methods for elementary analysis of precious alloy. Determination of indium content. EDTA complexometric titration
- YS/T 372.11-1994 Methods for elementary analysis of precious alloy.Determination of magnesium content.EDTA complexometric titration
- YS/T 372.12-1994 Methods for elementary analysis of precious alloy.Determination of zinc content.EDTA complexometric titration
- YS/T 372.13-1994 Methods for elementary analysis of precious alloy. Determination of tin content. EDTA complexometric titration
- YS/T 372.7-1994 Methods for elementary analysis of precious alloy. Determination of cobalt content. EDTA complexometric titration
- YS/T 533-2006 Method for Determination of Solid-Liquidus Temperature Range of Self-fluxing Alloy Powder
- YS/T 372.5-2006 Methods for elementary analysis of precious alloy. Determination of copper content in PtCu alloy. EDTA complexometric titration
- YS/T 372.8-2006 Methods for elementary analysis of precious alloy. Determination of cobalt content in PtCo alloy. EDTA complexometric titration
- YS/T 372.5-1994 Methods for elementary analysis of precious alloy. Determination of copper content in PtCu alloy. EDTA complexometric titration
- YS/T 121.1-1992 Heat Balance Test and Calculation Method of Flame Reflective Melting Furnace in Non-ferrous Metal Processing Enterprises
- YS/T 372.1-2006 Methods for elementary analysis of precious alloy. Determination of silver content. Potentiometer titration with potassium iodide
- YS/T 372.1-1994 Methods for elementary analysis of precious alloy. Determination of silver content. Potentiometer titration with potassium iodide
- YS/T 485-2005 Sintered bimetal material-Determination of shear strength
- YS/T 372.2-2006 Methods for elementary analysis of precious alloy. Determination of platinum content. Electricity titration using potassium permanganate
- YS/T 372.14-2006 Methods for elementary analysis of precious alloy. Determination of manganese content. Potentiometer titration using potassium permanganate
- YS/T 372.14-1994 Methods for elementary analysis of precious alloy. Determination of manganese content. Potentiometer titration using potassium permanganate
- YS/T 372.2-1994 Methods for elementary analysis of precious alloy. Determination of platinum content. Electricity titration using potassium permanganate
- YS/T 372.10-2006 Methods for elementary analysis of precious alloy. Determination of nickel content in AuNi and PdNi alloy. EDTA complexometric titration
- YS/T 372.10-1994 Methods for elementary analysis of precious alloy. Determination of nickel content in AuNi and PdNi alloy. EDTA complexometric titration
- YS/T 372.4-2006 Methods for elementary analysis of precious alloy. Determination of copper content.Complexometric titration using thiourea releasing EDTA
- YS/T 372.4-1994 Methods for elementary analysis of precious alloy. Determination of copper content.Complexometric titration using thiourea releasing EDTA
CU-NC, Method for Determination of Melting Point of Metals
- NC 26-174-1987 Drugs. Determination of Heavy Metals. Testing Methods
- NC 05-08-1986 Metallography. Determination of Metals Grain Size, Testing Method
- NC 33-81-1989 Oil Industry. Determination of Corrosion in Metal Plates. Testing.Methods
- NC 04-65-1985 Materials Testing. Determination of Metallic Powders Fluid Testing Method
Professional Standard - Light Industry, Method for Determination of Melting Point of Metals
- QB/T 3818-1999 Thickness testing method of the metal deposits for the light industrial products.Spot test
- QB/T 3824-1999 Testing method of the chemical protective coatings of the ferrous metal for the light industrial products.Dipping spot test
ES-UNE, Method for Determination of Melting Point of Metals
- UNE-EN 348:1994 ERRATUM PROTECTIVE CLOTHING. TEST METHOD: DETERMINATION OF BEHAVIOUR OF MATERIALS ON IMPACT OF SMALL SPLASHES OF MOLTEN METAL.
- UNE-EN 24883:1993 HARDMETALS. DETERMINATION OF CONTENTS OF METALLIC ELEMENTS BY X-RAY FLUORESCENCE. SOLUTION METHOD. (Endorsed by AENOR in May of 1993.)
German Institute for Standardization, Method for Determination of Melting Point of Metals
- DIN EN 348:1992-11 Protective clothing; test method; determination of behaviour of materials on impact of small splashes of molten metal; german version EN 348:1992 / Note: To be replaced by DIN EN ISO 9150 (2005-10).
- DIN EN 348:1992 Protective clothing; test method; determination of behaviour of materials on impact of small splashes of molten metal; german version EN 348:1992
- DIN CEN/TS 15412:2010-09*DIN SPEC 1123:2010-09 Solid recovered fuels - Methods for the determination of metallic aluminium; German version CEN/TS 15412:2010
- DIN EN 15685:2019-10 Building hardware - Requirements and test methods - Multipoint locks, latches and locking plates - Characteristics and test methods; German and English version prEN 15685:2019 / Note: Date of issue 2019-09-06
GM North America, Method for Determination of Melting Point of Metals
- GM GM9094P-1988 Method for Determining Melting Point of Semicrystalline Polymers by Differential Scanning Calorimetry
RO-ASRO, Method for Determination of Melting Point of Metals
- STAS 6679/20-1986 Metal cutting machine-tools CHECKING METHODS FOR DEVIATION FROM INTERSECTION OF AXES
- STAS 5998-1978 METALLOGRAPHICAL METHOD FOR POINTING OUT THE POROSITY AND STANDARD SCALES OF STEELS
- STAS 6679/16-1985 Metal cutting machine-tools HECKING METHODS OR AXIAL RUN-OUT
- STAS 5949-1980 DRTRRMINATION OF NON-METALIC STEELS Microscopie method
- STAS 7976-1990 Metallic coatings. Layer thickness determination by micriscopic method
- STAS 5949/2-1983 DETERMINATION OF NONMETALIC STEELS Automatic method
- STAS 7356/3-1980 METHODS FOR DETERMINING THE MECHANICAL PROPERTIES OF THE WELD METAL DEPOSITED BY GASSHIELDED METAL ARC-WELDING
- STAS 8206-1968
- STAS SR EN ISO 4524-6:1995 Metallic coatings-Test methods for electrodeposited goid and gold alloy coatings. Part 6: Determination of the presence of residual salts
- SR ISO 4524-1:1995 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings. Part 1: Determination of coatings thickness
- SR ISO 4524-4:1995 Metallic coationgs - Test methods for electrodeposited gold and gold alloy coatings. Part 4: Determination of gold content
SE-SIS, Method for Determination of Melting Point of Metals
- SIS SS-EN 348-1992 Protective clothing — Test method — Determination of behaviour of materials on impact of small splashes of molten metal
- SIS SS-ISO 4524/1:1987 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 1: Determination of coat- ing thickness
European Committee for Standardization (CEN), Method for Determination of Melting Point of Metals
- EN 348:1992 Protective Clothing - Determination of Behaviour of Materials on Impact of Small Splashes of Molten Metal
- EN 24503:1993 Hardmetals; determination of contents of metallic elements by X-ray fluorescence; fusion method (ISO 4503:1978)
- PD CEN/TS 15412:2010 Solid recovered fuels - Methods for the determination of metallic aluminium
- CEN/TS 15412:2010 Solid recovered fuels - Methods for the determination of metallic aluminium
- prEN ISO 13947 Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
Lithuanian Standards Office , Method for Determination of Melting Point of Metals
- LST EN 348+AC-1998 Protective clothing - Test method: Determination of behaviour of materials on impact of small splashes of molten metal
- LST EN 24503-2001 Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method (ISO 4503:1978)
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Method for Determination of Melting Point of Metals
- GB/T 6394-2017 Determination of estimating the average grain size of metal
- GB/T 4702.17-2016 Chromium metal─Determination of oxygen, nitrogen and hydrogen content─Inert gas fusion thermal infrared detection method and conductivity method
- GB/T 34726-2017 Method of determining corrosion rate of metal in contact with wood preservative
KR-KS, Method for Determination of Melting Point of Metals
HU-MSZT, Method for Determination of Melting Point of Metals
American National Standards Institute （ANSI), Method for Determination of Melting Point of Metals
- ANSI/ASTM B63:2001 Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
Professional Standard - Aviation, Method for Determination of Melting Point of Metals
- HB 5374-1987 Method for measuring galvanic current of different metals
- HB 5488-1991 Method for determination of stress-strain curve of metallic materials
AT-ON, Method for Determination of Melting Point of Metals
- ONORM EN 348-1993 Protective clothing - Test method - Determination of behaviour of materials n impact of small splashes of molten metal
NL-NEN, Method for Determination of Melting Point of Metals
- NEN-ISO 4503:1993 Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method (ISO 4503:1978)
Heilongjiang Provincial Standard of the People's Republic of China, Method for Determination of Melting Point of Metals
工业和信息化部, Method for Determination of Melting Point of Metals
- YS/T 3041.2-2021 Calibration method for determination of silver content in metallic ores, concentrates and corresponding materials by fire assay Part 2: Slag and ash pan recovery method
- YS/T 3041.3-2021 Calibration method for determination of silver content in metal ores, concentrates and corresponding materials by fire assay method Part 3: Slag recovery and ash blowing calibration method
- YS/T 1291-2018 Determination and calculation method of heat balance of heavy non-ferrous metallurgical furnaces (oxygen-rich side-blown bath melting furnace)
Jiangsu Provincial Standard of the People's Republic of China, Method for Determination of Melting Point of Metals
- DB32/T 3598-2019 Performance requirements and test methods for additively manufactured metal laser melting deposition parts
Professional Standard - Commodity Inspection, Method for Determination of Melting Point of Metals
- SN/T 0735.2-1997 Essential oils, perfumery isolates and synthetics for export.Determination of melting point.Crystals
NO-SN, Method for Determination of Melting Point of Metals
- NS 5544-1977 Methods for determining the mechanical properties of the weld metal deposited by electrodes 3,15 mm or more in diameter
Professional Standard - Nuclear Industry, Method for Determination of Melting Point of Metals
- EJ/T 20171-2018 Determination of Oxygen Content in Uranium Metal and Uranium Alloys Pulse Heating Inert Gas Fusion-Infrared Absorption Method
Professional Standard - Electricity, Method for Determination of Melting Point of Metals
- DL/T 263-2012 Analytical the progress methods of metal elements in transformer oil
- DL/T 263-2021 Determination method of metal elements in transformer oil
ZA-SANS, Method for Determination of Melting Point of Metals
- SANS 8401:1986 Metallic coatings - Review of methods of measurement of ductility
CEN - European Committee for Standardization, Method for Determination of Melting Point of Metals
- PD CEN/TS 15412:2006 Solid recovered fuels - Methods for the determination of metallic aluminium
- PREN 13658-1-2017 Metal lath and beads - Definitions@ requirements and test methods - Part 1: Internal plastering
- PREN 13658-2-2017 Metal lath and beads - Definitions@ requirements and test methods - Part 2: External rendering
Professional Standard - Automobile, Method for Determination of Melting Point of Metals
- QC/T 1003-2015 Determination of precious metal in metal support catalytic converter for motorcycles
IT-UNI, Method for Determination of Melting Point of Metals
ES-AENOR, Method for Determination of Melting Point of Metals
- UNE 135-365-1994 Vertical road traffic signs. Signing of guiding traffic. Directional panels from galvanised steel sheet. Characteristics and test methods
Standard Association of Australia （SAA）, Method for Determination of Melting Point of Metals
- AS 2354:1991 Open top metal cans - Definitions, and determination methods for dimensions and capacities
Professional Standard - Geology, Method for Determination of Melting Point of Metals
- DZ/T 0064.78-1993 Determination of Deuterium by Metal Zinc Reduction Method for Groundwater Quality
TR-TSE, Method for Determination of Melting Point of Metals
- TS 656-1968 METHODS OF CHEMICAL ANALYSIS OF MANGANESE ORES DETERMINATION OF METALLIC IRON CONTENT (Photometric method for metallic iron content up to and ?ncluding 2 %)
PL-PKN, Method for Determination of Melting Point of Metals
- PN M55551-28-1988 Metal cutting machin? tools Methods of measurement of positioning repetability
Professional Standard - Petroleum, Method for Determination of Melting Point of Metals
- SY 5161-2002 Atomic absorption spectrometry method for determination of metal elements in rocks
- SY/T 5161-2002 Determination of some metal elements in rocks by atomic absorption spectrometry
European Association of Aerospace Industries, Method for Determination of Melting Point of Metals
- AECMA PREN 2951-1997 Aerospace Series Metallic Materials Test Method Micrographic Determination of Content of Non-Metallic Inclusions Edition P 1
Canadian General Standards Board （CGSB), Method for Determination of Melting Point of Metals
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Method for Determination of Melting Point of Metals
- PREN 2951-1997 Aerospace Series Metallic Materials Test Method Micrographic Determination of Content of Non-Metallic Inclusions (Edition P1)
中国有色金属工业总公司, Method for Determination of Melting Point of Metals
- YS/T 118-1992 Measurement and calculation methods for heat balance of heavy non-ferrous metals and furnaces