ZH

RU

ES

Physical Length Measurement Method

Physical Length Measurement Method, Total:499 items.

In the international standard classification, Physical Length Measurement Method involves: Linear and angular measurements, Elements of buildings, Products of the textile industry, Construction materials, Optics and optical measurements, Fibre optic communications, Soil quality. Pedology, Textile fibres, Software development and system documentation, Products of the chemical industry, Road vehicle systems, Cereals, pulses and derived products, Structures of buildings, Insulating fluids, Thermodynamics and temperature measurements, Measurement of fluid flow, Test conditions and procedures in general, Analytical chemistry, Optical equipment, Nuclear energy engineering, Waxes, bituminous materials and other petroleum products, Adhesives, Leather technology, Fuels, Continuous handling equipment, Lighting, Ergonomics, Tobacco, tobacco products and related equipment, Buildings, Farming and forestry, Rubber and plastics products, Rubber, Agricultural machines, implements and equipment, Materials for the reinforcement of composites, Diagnostic, maintenance and test equipment, Electrical wires and cables, Ferroalloys, Particle size analysis. Sieving, Semiconducting materials, Testing of metals, Organic chemicals, Edible oils and fats. Oilseeds, Manufacturing processes in the rubber and plastics industries, Ferrous metals, Aerosol containers, Water quality, Optoelectronics. Laser equipment, Cork and cork products, Plastics, Medical equipment, Non-ferrous metals, Refractories, Construction of waterways and ports, Metrology and measurement in general, Non-textile floor coverings, Paper and board, Animal feeding stuffs, Environmental protection, Air quality, Wood, sawlogs and sawn timber, Cinematography, Paint ingredients, Milk and milk products, Natural gas, Radiation protection, Wastes, Insulating materials, Photography, Electrical accessories, Radiation measurements, Earth-moving machinery, Fertilizers, Surface treatment and coating, Solar energy engineering, Road engineering, Vocabularies, Quality, Powder metallurgy, Biology. Botany. Zoology, Meat, meat products and other animal produce.


CZ-CSN, Physical Length Measurement Method

  • CSN 25 6112-1986 Measuring device for length measuring of abric. Methods for verification
  • CSN 25 6112-2004 Measuring device for lenght measuring of fabric - Methods for verification
  • CSN 73 6173-1968 Method of measuring lenght of drilled core out of con- crete pavement
  • CSN ISO 7726:1993 Thermal environments. Instruments and methods for measuring physical quantities
  • CSN 36 8445-1985 Magnetic tapes. Methods of measurements of physical-machanical properties
  • CSN 65 6126-1983 Jet fuel. Spectrophoto- etric method for the etermination of aphtalene hydrocarbons ontent

German Institute for Standardization, Physical Length Measurement Method

  • DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
  • DIN 53806:1970 Testing of textiles; determination of fibre length of cotton according to the comb staple method
  • DIN EN ISO 2286-1:2017-01 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass (ISO 2286-1:2016); German version EN ISO 2286-1:2016
  • DIN EN 14049:2006 Irrigation techniques - Water application intensity - Calculation principles and measurement methods; English version of DIN EN 14049:2004 + A1:2005
  • DIN EN 14049:2006-01 Irrigation techniques - Water application intensity - Calculation principles and measurement methods; German version EN 14049:2003 + A1:2005
  • DIN 43903:1987 Elektrical switchgear and controlgear; humidity of compressed air; physical relationships, methods of measuring
  • DIN 25457-1:2014 Activity measurement methods for the clearance of radioactive substances and nuclear facility components - Part 1: Fundamentals
  • DIN 25457-1:2013 Activity measurement methods for the clearance of radioactive substances and nuclear facility components - Part 1: Fundamentals
  • DIN EN 12697-13:2018-01 Bituminous mixtures - Test methods - Part 13: Temperature measurement; German version EN 12697-13:2017
  • DIN EN 13040:2008 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density; English version of DIN EN 13040:2008-01
  • DIN EN ISO 3882:2003 Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003); German version EN ISO 3882:2003
  • DIN EN ISO 1463:2021-08 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021); German version EN ISO 1463:2021
  • DIN ISO 5725-1:1997 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994)
  • DIN EN 13040:2008-01 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density; German version EN 13040:2007
  • DIN EN ISO 11269-1:2013-03 Soil quality - Determination of the effects of pollutants on soil flora - Part 1: Method for the measurement of inhibition of root growth (ISO 11269-1:2012); German version EN ISO 11269-1:2012

IX-SA, Physical Length Measurement Method

Korean Agency for Technology and Standards (KATS), Physical Length Measurement Method

  • KS F 2239-2008 Doors and windows-Test method for mechanical deformation of edge rail
  • KS F 2412-1990 Testing method for measuring length of drilled concrete cores
  • KS F 2412-1985 Testing method for measuring length of drilled concrete cores
  • KS X ISO/IEC 19761:2006 Software engineering-COSMIC-FFP-A functional size measurement method
  • KS C IEC 60793-1-22-2003(2018)
  • KS F 2412-1990(2010) Testing method for measuring length of drilled concrete cores
  • KS K ISO 9863:2002 MEASURING METHOD FOR THICKNESS OF GEOTEXTILE
  • KS K 0511-2009(2014) Measuring method for thread per unit length in woven cloth
  • KS F 2366-2010 Standard test method for theoretical maximum specific gravity of asphalt mixtures
  • KS C IEC 60793-1-22:2003 Optical fibres-Part 1-22:Measurement methods and test procedures-Length measurement
  • KS M ISO 2286-1-2017(2022) Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass
  • KS M 1033-1997 Testing method for density of high-purity hydrocarbons by Bingham pycnometer
  • KS K 0513-2017 Measuring method for stretched density of knitted fabrics
  • KS C IEC 60885-3:2019 Electrical test methods for electric cables — Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
  • KS K ISO 2060:2019 Textiles — Yarn from packages — Determination of linear density(mass per unit length) by the skein method
  • KS K 0231-2019 Test method for resin content in resin finished textiles
  • KS I ISO 11269-1:2005 Soil quality-Determination of the effects of pollutants on soil flora-Part 1:Method for the measurement of inhibition of root growth
  • KS M ISO 2286-1:2012 Rubber- or plastics-coated fabrics-Determination of roll characteristics-Part 1:Methods for determination of length, width and net mass
  • KS M ISO 2286-1:2017 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass
  • KS F ISO 6016:2003 Earth-moving machinery-Methods of measuring the masses of whole machines, their equipment and components
  • KS K ISO 7211-2:2017 Textiles-Woven fabrics-Construction-Methods of analysis-Part 2:Determination of number of threads per unit length
  • KS K ISO 7211-2:2022 Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length
  • KS F 2360-2006 Testing method for degree of particle coating of asphalt-aggregate mixture
  • KS D ISO 3882:2012 Metallic and other inorganic coatings-Review of methods of measurement of thickness
  • KS F 2367-2006 Testing method for thickness or height of compacted asphalt paving mixture specimens
  • KS I ISO 11269-1-2005(2015) Soil quality-Determination of the effects of pollutants on soil flora-Part 1:Method for the measurement of inhibition of root growth
  • KS C IEC 60811-606-2015(2020) Electric and optical fibre cables — Test methods for non-metallic materials — Part 606: Physical tests — Methods for determining the density
  • KS C IEC 60885-3:2003 Electrical test methods for electric cables-Part 3:Test methods for partial discharge measurements on lengths of extruded power cables
  • KS I ISO 11269-1:2021 Soil quality — Determination of the effects of pollutants on soil flora —Part 1: Method for the measurement of inhibition of root growth

Military Standard of the People's Republic of China-General Armament Department, Physical Length Measurement Method

  • GJB 8083-2013 The measurement method of atmospheric coherence length
  • GJBz 20058.2-1991(XG1-2015) Method for Determination of Physical Constants of Poisons - Determination of Density (Density Bottle Method) Modification Sheet 1-2015
  • GJB 8683.4-2015 Test methods for physical parameters of pyrotechnics Part 4: Standard graduated cylinder method for determination of bulk density
  • GJB 8683.5-2015 Test methods for physical parameters of pyrotechnics Part 5: Determination of bulk density using glass measuring cylinder method
  • GJB 1485-1992 Precision, accuracy and uncertainty of material physical property testing methods
  • GJB 8683.2-2015 Test methods for physical parameters of pyrotechnics Part 2: Density determination density bottle method
  • GJBz 20058.3-1991(XG1-2015) Method for determination of physical constants of poisons - Determination of viscosity (Pine's method) Modification sheet 1-2015
  • GJB 8683.3-2015 Test methods for physical parameters of pyrotechnics Part 3: Determination of density of grain column (block) Hydrostatic weighing method
  • GJB 8683.6-2015 Test methods for physical parameters of pyrotechnics Part 6: Particle size determination and screening method

American Society for Testing and Materials (ASTM), Physical Length Measurement Method

  • ASTM D3773-90(1996)e1 Standard Test Methods for Length of Woven Fabric
  • ASTM D3773/D3773M-10(2019) Standard Test Methods for Length of Woven Fabric
  • ASTM D1447-89(1994)e1 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement
  • ASTM D1447-07(2012)e1 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement
  • ASTM C559-90(2000) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
  • ASTM D1447-07 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement
  • ASTM D1447-07e1 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement
  • ASTM D1447-00 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement
  • ASTM D1447-07(2021) Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement
  • ASTM C1542/C1542M-02 Standard Test Method for Measuring Length of Concrete Cores
  • ASTM C1542/C1542M-02(2010) Standard Test Method for Measuring Length of Concrete Cores
  • ASTM C1542/C1542M-14 Standard Test Method for Measuring Length of Concrete Cores
  • ASTM C1542/C1542M-16 Standard Test Method for Measuring Length of Concrete Cores
  • ASTM C1542/C1542M-16a Standard Test Method for Measuring Length of Concrete Cores
  • ASTM C559-90(2010) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
  • ASTM C1514-02 Standard Test Method for Measurement of 235U Fraction using the Enrichment Meter Principle
  • ASTM C559-90(2005) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
  • ASTM F559-95(2000) Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
  • ASTM F559-05(2017) Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
  • ASTM E1457-13 Standard Test Method for Measurement of Creep Crack Growth Times and Rates in Metals
  • ASTM D5946-04 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
  • ASTM D6536-00 Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
  • ASTM D6536-00(2005) Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
  • ASTM D6535-05 Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser
  • ASTM D6536/D6536M-00(2010)e1 Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
  • ASTM C559-16(2020) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
  • ASTM F559-05(2010) Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
  • ASTM D5793-18 Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings
  • ASTM D5625-97(2002) Standard Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
  • ASTM D5625-97 Standard Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products
  • ASTM B659-90(2003) Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
  • ASTM F559-05 Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
  • ASTM D4810-06 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4810-88(1999) Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4810-20 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM E2244-02 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
  • ASTM C559-16 Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
  • ASTM D4984-89(1999) Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4888-20 Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4984-20 Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D5502-00(2010) Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
  • ASTM E2244-05 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
  • ASTM E2244-11 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
  • ASTM E2244-11(2018) Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
  • ASTM D5994-98(2003) Standard Test Method for Measuring Core Thickness of Textured Geomembrane
  • ASTM D5225-98 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D5225-98(2003) Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D5225-22 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM E2244-11e1 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
  • ASTM D1294-95a(2001) Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length
  • ASTM D1294-95a Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length
  • ASTM D1294-05(2013) Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length (Withdrawn 2022)
  • ASTM D5502-21 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
  • ASTM D5994/D5994M-10(2021) Standard Test Method for Measuring Core Thickness of Textured Geomembranes
  • ASTM C1514-08(2017) Standard Test Method for Measurement of 235U Fraction Using Enrichment Meter Principle
  • ASTM D5994/D5994M-10(2015)e1 Standard Test Method for Measuring Core Thickness of Textured Geomembranes
  • ASTM D4888-88(1999) Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D7635/D7635M-18 Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
  • ASTM D5199-12 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
  • ASTM D5225-17 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D5225-09 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D5867-05 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
  • ASTM D5867-95 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
  • ASTM D5867-12(2020) Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
  • ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;

Canadian General Standards Board (CGSB), Physical Length Measurement Method

HU-MSZT, Physical Length Measurement Method

British Standards Institution (BSI), Physical Length Measurement Method

  • BS ISO 23539:2006 Photometry - The CIE system of physical photometry
  • BS EN 60793-1-22:2002 Optical fibres - Measurement methods and test procedures - Length measurement - Section 22: Length measurement methods
  • BS 3356:1990 Method for determination of bending length and flexural rigidity of fabrics
  • BS ISO/IEC 19761:2011 Software engineering. COSMIC. A functional size measurement method
  • BS EN 60793-1-60:2017 Optical fibres - Measurement methods and test procedures. Beat length
  • BS 7755-5.6:1999 Soil quality - Physical methods - Determination of dry bulk density
  • BS 7755-5.2:1996 Soil quality. Physical methods. Determination of water content in the unsaturated zone. Neutron depth probe method
  • BS 7755-5.3:1998 Soil quality - Physical methods - Determination of particle density
  • BS EN ISO 2286-1:2016 Tracked Changes. Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of length, width and net mass
  • BS EN ISO 9073-7:1998 Textiles. Test methods for nonwovens. Determination of bending length
  • BS 903-A63:1995 Physical testing of rubber - Method for determination of crystallization effects by hardness measurements
  • BS EN 14049:2003(2011) Water application intensity - Calculation principles and measurement methods
  • BS EN 14049:2003 Water application intensity - Calculation principles and measurement methods
  • BS 684-1.6:1988 Methods of analysis of fats and fatty oils. Physical methods. Determination of titre
  • BS 6068-5.17:1995 Water quality. Biological methods. Determination of the prolonged toxicity of substances to freshwater fish. Method for evaluating the effects of substances on the growth rate of rainbow trout [Oncorhynchus mykiss Walbaum (Teleostei, Salmonidae)]
  • BS EN ISO 11269-1:2012 Soil quality. Determination of the effects of pollutants on soil flora. Method for the measurement of inhibition of root growth
  • BS EN ISO 2286-1:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of length, width and net mass
  • BS 7755-5.1:1996 Soil quality - Physical methods - Determination of pore water pressure - Tensiometer method
  • BS 3424-25:1993 Testing coated fabrics - Method 28 - Method for determination of the coating thickness and thickness of any expanded layer
  • BS 490-10.7:1984 Conveyor and elevator belting - Testing for physical properties - Method for determination of length of an endless belt
  • BS 3762-4.2:1986 Analysis of formulated detergents. Physical test methods. Method for determination of apparent bulk density
  • BS 490 Sec.10.7:1984 Conveyor and elevator belting. Testing for physical properties. Method for determination of length of an endless belt
  • BS 4939:1987 Method for determination of thickness loss of textile floor coverings after prolonged heavy static loading
  • BS 903-A26:1995 Physical testing of rubber - Method for determination of hardness (hardness between 10 IRHD and 100 IRHD)
  • BS EN 60811-606:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Methods for determining the density
  • BS EN 60885-3:2015 Tracked Changes. Electrical test methods for electric cables. Test methods for partial discharge measurements on lengths of extruded power cables
  • BS 4317-26:1991 Methods of test for cereals and pulses. Measurement of temperature of grain during bulk storage
  • BS EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Routine method
  • BS 684-1.16:1981 Methods of analysis of fats and fatty oils. Physical methods. Determination of water content: entrainment method
  • BS 5182:1975 Method for the measurement of the length of wool fibres processed on the worsted system, using a fibre diagram machine
  • BS 6068-2.17:1986 Water quality - Physical, chemical and biochemical methods - Methods for determination of total cyanide
  • BS IEC 62899-503-3:2021 Printed electronics. Quality assessment. Measuring method of contact resistance for the printed thin film transistor. Transfer length method
  • BS EN ISO 3882:2003 Metallic and other inorganic coatings - Review of methods of measurement of thickness
  • BS EN ISO 787-4:2017 General methods of test for pigments and extenders. Determination of acidity or alkalinity of the aqueous extract
  • BS CWA 15846:2008 Measuring method for dynamic compactness and bearing capacity with SP-LFWD (small-plate light falling weight deflectometer)
  • BS ISO 24421:2023 Biotechnology. Minimum requirements for optical signal measurements in photometric methods for biological samples
  • BS 1747-2:1969 Methods for the measurement of air pollution - Determination of concentration of suspended matter
  • BS 6068-2.18:1986 Water quality - Physical, chemical and biochemical methods - Methods for the determination of easily liberatable cyanide
  • BS 6068-2.34:1988 Water quality - Physical, chemical and biochemical methods - Method for the determination of the chemical oxygen demand

International Organization for Standardization (ISO), Physical Length Measurement Method

  • ISO 23539:2005 Photometry - The CIE system of physical photometry
  • ISO/IEC 19761:2011 Software engineering - COSMIC: a functional size measurement method
  • ISO/IEC 19761:2003 Software engineering - COSMIC-FFP - A functional size measurement method
  • ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities
  • ISO/AWI 7211-2:2023 Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length
  • ISO 7726:1998 Ergonomics of the thermal environment - Instruments for measuring physical quantities
  • ISO 11269-1:1993 Soil quality; determination of the effects of pollutants on soil flora; part 1: method for the measurement of inhibition of root growth
  • ISO 2286-1:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of the length, width and net mass
  • ISO 2286-1:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass
  • ISO 11269-1:2012 Soil quality - Determination of the effects of pollutants on soil flora - Part 1: Method for the measurement of inhibition of root growth
  • ISO 3882:2003 Metallic and other inorganic coatings - Review of methods of measurement of thickness
  • ISO/CD 7211-2 Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length
  • ISO 24421:2023 Biotechnology — Minimum requirements for optical signal measurements in photometric methods for biological samples

Association Francaise de Normalisation, Physical Length Measurement Method

  • NF X31-502:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente - Densitomètre à membrane.
  • NF G07-114:1977 Textiles. Test for fabrics. Method of determining length of pieces.
  • NF EN 60793-1-22:2002 Fibres optiques - Partie 1-22 : méthodes de mesure et procédures d'essai - Mesure de la longueur
  • NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
  • NF X34-111:2012 Solid biofuels - Determination of length and diameter of pellets.
  • NF G07-115:1977 Textiles. Test for woven fabrics. Method of determining of mass per unit length and mass per unit area of pieces.
  • NF C93-840-1-22*NF EN 60793-1-22:2002 Optical fibres - Part 1-22 : measurements methods and test procedures - Length measurement
  • NF EN 14049:2004 Intensité d'apport d'eau - Principes de calcul et méthodes de mesure
  • NF X35-202:1994 Thermal environments. Instruments and methods for measuring physical quantities.
  • NF U51-470*NF EN 14049:2004 Water application intensity - Calculation principles and measurement methods
  • NF E11-099:2021 Length measuring instruments - Internal micrometers with 3 spindles - Specifications - Test methods
  • NF E11-050:1990 Length measuring instruments. Mechanical dial gauges with radial retractable stem. Specifications and test methods.
  • XP S94-167-2-1998 Implants for surgery. Artificial ligaments. Part 2 : mechanical characterization. Determination of direct tensile strength and elongation (method A), determination of indirect tensile strength and elongation (method B) and residual elongation (method C)
  • NF S94-167-2:2014 Implants for surgery - Artificial ligaments - Part 2 : mechanical characterization - Determination of direct tensile strength and elongation (method A), determination of indirect tensile strength and elongation (method B) and residual elongation (method C
  • NF E11-097:1998 Geometrical product specification (GPS). Length measuring instruments. Screw micrometers depth gauges. Specifications. Test methods.
  • NF E11-017:1996 Geometrical product specification (gps). Length measuring instruments. Standard wires. Specifications. Test methods.
  • NF EN ISO 2286-1:2016 Supports textiles revêtus de caoutchouc ou de plastique - Détermination des caractéristiques des rouleaux - Partie 1 : méthodes de détermination de la longueur, de la largeur et de la masse nette
  • NF X31-505:1992 Soil quality - Physical methods - Method for determining the bulk volume and the water content of lumps of earth
  • NF EN 12697-13:2017 Mélanges Bitumineux - Méthodes dessai - Partie 13 : mesure de la température
  • NF EN ISO 16851:2013 Courroies transporteuses à carcasse textile - Méthode de mesurage de la longueur nette d'une courroie transporteuse sans fin (jonctionnée)
  • NF E11-099:1993 Length measuring instruments. Internal micrometers with 3 spindles. Specifications. Test methods.
  • NF EN ISO 4671:2022 Tuyaux et flexibles en caoutchouc et en plastique - Méthodes de mesurage des dimensions des tuyaux et de la longueur des flexibles
  • NF U51-470/A1*NF EN 14049/A1:2006 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
  • NF EN 14049/A1:2006 Techniques d'irrigation - Intensité d'apport d'eau - Principes de calcul et méthodes de mesure
  • NF EN 13040:2007 Amendements organiques et supports de culture - Préparation des échantillons pour les essais physiques et chimiques, détermination de la teneur en matière sèche, du taux d'humidité et de la masse volumique compactée en laboratoire
  • NF EN 1049-2:1994 Textiles - Tissus - Construction - Méthodes d'analyse - Partie 2 : détermination du nombre de fils par unité de longueur.
  • NF X31-230-1*NF EN ISO 11269-1:2013 Soil quality - Determination of the effects of pollutants on soil flora - Part 1: method for the measurement of inhibition of root growth
  • NF U44-307/A1:2006 Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space.
  • NF U44-307*NF EN 13041:2012 Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space
  • NF A91-109*NF EN ISO 3882:2003 Metallic and other inorganic coatings - Review of methods of measurement of thickness.
  • NF A91-109:1995 Metallic and other non-organic coatings. Review of methods of measurement of thickness.
  • NF G37-138:2011 Rubber- or plastic-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method.
  • NF C32-049-3*NF EN 60885-3:2015 Electrical test methods for electric cables - Part 3 : test methods for partial discharge measurements on lengths of extruded power cables

UY-UNIT, Physical Length Measurement Method

Association of German Mechanical Engineers, Physical Length Measurement Method

  • VDI/VDE 2603-1990 Methods of surface measurement; measurement of profile bearing length ratio
  • VDI/VDE 3511 Blatt 1-1996 Temperature measurement in industry - Principles and special methods of temperature measurement
  • VDI/VDE 3511 Blatt 4.3-2005 Temperature measurement in industrie - Radiation thermometry - Standard test methods for radiation thermometers with one wavelenght range
  • VDI 2463 Blatt 8-1982 Particulate matter measurement; measurement of mass concentration in ambient air; standard method for the comparsion of nonfractionating methods

未注明发布机构, Physical Length Measurement Method

  • BS 3356:1990(1999) Method for Determination of bending length and flexural rigidity of fabrics
  • BS 4550-3-4:1978(1999) Methods of testing cement — Part 3 : Physical tests — Section 3.4 Strength tests
  • BS 903-A26:1995(2001) Physical testing of rubber — Part A26 : Method for determination of hardness (hardness between 10 IRHD and 100 IRHD)

National Metrological Technical Specifications of the People's Republic of China, Physical Length Measurement Method

  • JJF(烟草) 2.5-2008 Guidelines for the Evaluation of Uncertainty in the Measurement of Cigarette Physical Indexes Part 5: Length Photoelectric Method
  • JJF(烟草)2.5-2008 Guidelines for the Evaluation of Uncertainty in the Measurement of Cigarette Physical Indexes Part 5: Length Photoelectric Method

GOSTR, Physical Length Measurement Method

  • GOST R 58877-2020 Sport swimming pools. Bath length. Measurement methods
  • GOST 26824-2018 Buildings and structures. Methods for mеаsuring the luminance
  • PNST 402-2020 Workplace atmospheres. Length-of-stain detector tube systems for short-term measurements. Requirements and test methods

Japanese Industrial Standards Committee (JISC), Physical Length Measurement Method

  • JIS X 0143:2013 Software engineering -- COSMIC: a functional size measurement method
  • JIS X 0143:2006 Software engineering -- COSMIC-FFP -- A functional size measurement method
  • JIS G 0557:2019 Methods of measuring case depth hardened by carburizing treatment for steel
  • JIS A 1129-3:2010 Methods of measurement for length change of mortar and concrete -- Part 3: Method with dial gauge
  • JIS A 1129-1:2010 Methods of measurement for length change of mortar and concrete -- Part 1: Method with comparator
  • JIS A 1129-2:2010 Methods of measurement for length change of mortar and concrete -- Part 2: Method with contact-type strain gauge
  • JIS K 6404-2-1:1999 Testing methods for rubber-or plastics-coated fabrics -- Determination of roll characteristics -- Part 1: Methods for determination of the length, width and net mass of a roll

American National Standards Institute (ANSI), Physical Length Measurement Method

  • ANSI/ASTM C559:2000 Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
  • ANSI/ASTM D5947:2001 Test Methods for Physical Dimensions of Solid Plastics Specimens
  • ANSI/ASTM D5225:1998 Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer (08.03)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Physical Length Measurement Method

  • GB/T 16594-1996 Micron grade lenght measurement by SEM
  • GB/T 13387-1992 Test method for measuring flat length on slices of electronic materials
  • GB/T 16594-2008 General rules for measurement of length in micron scale by SEM
  • GB/T 20307-2006 General rules for nanometer-scale length measurement by SEM
  • GB/T 3690-1994 Conveyor belts of textile carcase--Test method for tensile strength and elongation
  • GB/T 22838.2-2009 Determination of physical characteristics for cigarettes and filter rods.Part 2:Length.Photoelectricity method
  • GB/T 6609.15-2004 Chemical analysis methods and determination of physical performance of alumina Determination of chlorine content-Ferric thiocyanate photometric method
  • GB/T 6609.6-2004 Chemical analysis methods and determination of physical performance of alumina Determination of potassium oxide content-Flame photometric method
  • GB/T 7689.3-2001 Reinforcements--Test method for woven fabrics Part 3: Determination of width and length
  • GB/T 7689.3-2013 Reinforcements.Test method for woven fabrics.Part 3:Determination of width and length
  • GB/T 5441.10-1985 Test methods for communication cable--Measurement of actual length of coaxial pair--Sine wave method
  • GB/T 6609.3-2004 Chemical analysis methods and Determination of physical performance of alumina Determination of silicon dioxide content-Molybdenum blue photometric method
  • GB/T 13387-2009 Test method for measuring flat length wafers of silicon and other electronic materials
  • GB/T 6609.9-2004 Chemical analysis methods and determination of physical performance of alumina Determination of cupric oxide content-2,9-Dimethyl-1,10phenanthroline photometric method
  • GB/T 20167-2006 Physical test method of rare earth polishing powder - Determination of burnishing mass - Gravimetric analysis method
  • GB/T 6609.2-2004 Chemical analysis methods and Determination of physical performance of alumina Determination of the loss of mass at 1100°C-Gravimetric method
  • GB/T 6609.14-2004 Chemical analysis methods and determination of physical performance of alumina Determination of fluorine content-Lanthanum-alizarincomplexone spectrophotometric method
  • GB/T 6609.17-2004 Chemical analysis methods and determination of physical performance of alumina Determination of phosphorus pentoxide content-Molybdenum blue spectrophotometric method
  • GB/T 3655-1992 Magnetic sheet and strip—Methods of measurement of magnetic electrical physical properties
  • GB/T 6609.16-2004 Chemical analysis methods and determination of physical performance of alumina Determination of boron trioxide content-Curcumin spectrophotometric method
  • GB/T 6609.4-2004 Chemical analysis methods and determination of physical performance of alumina Determination of ferric oxide content-Orthophenanthroline photometric method
  • GB/T 12687.3-2010 Chemical analysis methods of rare earth nitrate for growth regulator for plant.Part 3: Determination of the water insoluble matter content.Gravimetry
  • GB/T 6609.25-2004 Chemical analysis methods and determination of physical performance of alumina Determination of untamped density
  • GB/T 6609.1-2004 Chemical analysis methods and Determination of physical performance of alumina Determination of moisture-Gravimetric method
  • GB/T 6609.37-2009 Chemical analysis methods and determination of physical performance of alumina-Part 37: Determination of the particles size content less than 20μm
  • GB/T 6609.7-2004 Chemical analysis methods and determination of physical performance of alumina Determination of titanium dioxide content-Diantiprylmehane photometric method
  • GB/T 15972.22-2008 Specifications for optical fibre test methods.Part 22:Measurement methods and test procedures for dimensions.Length measurement
  • GB/T 6609.8-2004 Chemical analysis methods and determination of physical performance of alumina Determination of chromium sesquioxide content-Diphenyl carbazide photometric method
  • GB/T 6609.27-2004 Chemical analysis methods and determination of physical performance of alumina Particle size analysis-Sieving method
  • GB/T 20167-2012 Physical test method of rare earth polishing powder.Determination of burnishing mass and scratch.Gravimetry
  • GB/T 6609.21-2004 Alumina chemical analysis method and physical property determination method Butyl rhodamine B spectrophotometric method Determination of gallium trioxide content
  • GB/T 6609.21-2004 Alumina chemical analysis method and physical property determination method Butyl rhodamine B spectrophotometric method Determination of gallium trioxide content
  • GB/T 6609.21-2004 Alumina chemical analysis method and physical property determination method Butyl rhodamine B spectrophotometric method Determination of gallium trioxide content
  • GB/T 6609.26-2004 Chemical analysis methods and determination of physical performance of alumina Determination of absolute density-Pycnometer method
  • GB/T 6609.18-2004 Chemical analysis methods and determination of physical performance of alumina Determination of sulfate content-N,N-dimethyI-P-phenylenediamine spectrophotometric method
  • GB/T 6609.10-2004 Chemical analysis methods and determination of physical performance of alumina Determination of vanadic oxide content-N-benzoyI-N-phenylhydroxylamine extraction photometric method
  • GB/T 6609.5-2004 Chemical analysis methods and determination of physical performance of alumina Determination of sodium oxide content
  • GB/T 11060.11-2014 Natural gas.Determination of sulfur compounds.Part 11:Determination of hydrogen sulfide content by length-of-stain detector tubes method
  • GB/T 20170.1-2006 Test method of physical characters of rare earth metals and compounds.Determination for particle size distribution of rare earth compounds
  • GB 5124.4-1985 Methdos for chemical analysis of hardmetals-The photometric peroxide method for the determination of titanium content
  • GB/T 5124.4-1985 Methods for chemical analysis of hardmetals--The photometric peroxide method for the determination of titanium content
  • GB/T 23561.2-2009 Methods for determining the physical and mechanical properties of coal and rock.Part 2:Methods for determining the true density of coal and rock

ZA-SANS, Physical Length Measurement Method

  • SANS 19761:2003 Software engineering - COSMIC-FFP - A functional size measurement method
  • SANS 60793-1-22:2001 Optical fibres Part 1-22: Measurement methods and test procedures - Length measurement
  • SANS 7211-2:1984 Textiles - Woven fabrics - Construction - Methods of analysis Part 2: Determination of number of threads per unit length
  • SANS 3882:1986 Metallic and other non-organic coatings - Review of methods of measurement of thickness

The American Road & Transportation Builders Association, Physical Length Measurement Method

  • AASHTO T 148-2007 Standard Method of Test for Measuring Length of Drilled Concrete Cores
  • AASHTO T 148-2015 Standard Method of Test for Measuring Length of Drilled Concrete Cores

IN-BIS, Physical Length Measurement Method

Professional Standard - Textile, Physical Length Measurement Method

  • FZ/T 50009.2-1998 Testing method for average length of three-dimensional crimp polyester staple fibres.Measure at length of single fibres
  • FZ/T 50009.1-1998 Testing method for linear density of three-dimensional crimp polyester staple fibres.Measure at length of single fibres

Standard Association of Australia (SAA), Physical Length Measurement Method

  • AS 2001.2.5:1991 Methods of test for textiles - Physical tests - Determination of the number of threads per unit length in woven fabric
  • AS 4878.2:2001 Methods of test for coated fabrics - Determination of length, width and net mass
  • AS 2001.2.13:1987 Methods of test for textiles - Physical tests - Determination of mass per unit area and mass per unit length of fabrics
  • AS 2001.2.15:1989 Methods of test for textiles - Physical tests - Determination of thickness of textile fabrics
  • AS 2313.2.3:2005 Methods of test for single sided and double sided pressure-sensitive adhesive tape - Physical properties - Length
  • AS 2313.2.2:2005 Methods of test for single sided and double sided pressure-sensitive adhesion tape - Physical properties - Elongation
  • AS 4878.6:2001 Methods of test for coated fabrics - Determination of tensile strength and elongation at break
  • AS 2001.2.9:1977 Methods of test for textiles - Physical tests - Determination of stiffness of cloth
  • AS 1774.6:2001 Refractories and refractory materials - Physical test methods - Determination of true density
  • AS 2001.2.12:1987 Methods of test for textiles - Physical tests - Determination of width of fabrics
  • AS 2300.10.7:1991 Methods of chemical and physical testing for the dairying industry - Caseins, caseinates and coprecipitates - Determination of lactose - Photometric method
  • IEC 60885-3:2015 RLV Electrical test methods for electric cables — Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
  • AS 1774.2:2001 Refractories and refractory materials - Physical test methods - Determination of bulk density of granular materials
  • AS 2300.1.10:1988 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of phosphatase activity
  • AS 1774.25:1998(R2013)

RU-GOST R, Physical Length Measurement Method

  • GOST 13586.5-1993 Grain. Method of moisture content determination
  • GOST R EN 822-2008 Thermal insulating products for building applications. Methods for measurement of length and width
  • GOST 13762-1986 Measuring means for linear and angular measurements. Marking, packing, transporting and storage
  • GOST R IEC 60793-1-22-2012 Optical fibres. Part 1-22. Measurement methods and test procedures. Length measurement
  • GOST 17316-1971 Artificial leather. Measuring method of tearing load and elongation of break
  • GOST 24940-2016 Buildings and structures. Methods for measuring the illuminance
  • GOST 26824-1986 Buildings and structures. Methods for measuring the luminance
  • GOST 26824-2010 Buildings and Structures. Methods for measuring the luminance
  • GOST R 54944-2012 Buildings and structures. Methods for measuring the illuminance
  • GOST 24933.2-1981 Seed of flowers. Methods for determination of germinating adility and germinative energy
  • GOST R 56284-2014 Artificial leather. Measuring method of tearing load and elongation of break
  • GOST 25213-1982 Methods for measurement of the pulse length and the pulse repetition frequency
  • GOST R ISO 9727-3-2010 Cylindrical cork stoppers. Methods for determination of physical properties. Part 3. Determination of humidity content
  • GOST 8.471-1982 State system for ensuring the uniformity of measurements. Machines for textile web lengths measuring. Methods and means of verification
  • GOST ISO 2589-2013 Leather. Physical and mechanical tests. Method of determination of thickness
  • GOST ISO 9727-3-2016 Cylindrical cork stoppers. Methods for determination of physical properties. Part 3. Determination of humidity content
  • GOST 33393-2015 Buildings and structures. Methods for measuring of illuminance pulsation factor
  • GOST R 56883-2016 Biomass. Determination of bulk density by standard method
  • GOST 30483-1997 Grain. Methods for determination of general and fractional content of extraneous matter and damaged grains; content of small grains and grain size; content of grains attacked by pests; content of metallic particles
  • GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
  • GOST R ISO 17235-2015 Leather. Physical and mechanical tests. Method for determination of softness
  • GOST R 50089-2003 Radioactive waste. Method of measuring long-time alpha-radiation resistance of solidified high-level radioactive waste
  • GOST R 50089-1992 Radioactive waste. Method for measurement of long-time alpha-resistent measurements of solidified radioactive waste
  • GOST 16010-1970 Engineering rubberized fabrics. Method for determining tensile strength and elongation in tensile test
  • GOST ISO 2420-2014 Leather. Physical and mechanical tests. Method of determination of apparent density
  • GOST 8.336-1978 State system for ensuring the uniformity of measurements. IZM type optical mechanical length measuring machines. Methods and means of calibration
  • GOST 8.341-1979 State system for ensuring the uniformity of measurements. Low-pressure pneumatic length gages. Methods and means for verification
  • GOST 12037-1981 Seed of farm crops. Methods for determination of purity and seed lot impurity
  • GOST R 8.861-2013 State system for ensuring the uniformity of measurements. Means of measuring spectral density of radiance, spectral density of radiant intensity and spectral density of irradiance in the wavelength range of 0,2-25,0 mkm. Verification procedure
  • GOST R 54945-2012 Buildings and structures. Methods for measuring of illuminance pulsation factor
  • GOST R 50467-1993 Ethanol for industrial use. Methods of test. Estimation of content of carbonyl compounds present in small amounts. Photometric method
  • GOST R 8.1558-1993 State system for ensuring the uniformity of measurements. State verification schedule for 1 to 1·10 minus 3 degree V/m2 degree irradiance. Measuring means within the wavelength range of 1-50 mc
  • GOST 25380-2014 Buildings and structures. Method of measuring density of heat flows passing through enclosing structures
  • GOST R ISO 17186-2016 Leather. Physical and mechanical tests. Methods for determination of surface coating thickness

Danish Standards Foundation, Physical Length Measurement Method

  • DS/EN 60793-1-22:2002 Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement
  • DS/EN 27726:1994 Thermal environments-Instruments and methods for measuring physical quantities
  • DS/EN 14049:2004 Water application intensity - Calculation principles and measurement methods
  • DS/EN 14049/A1:2005 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
  • DS/EN ISO 11269-1:2013 Soil quality - Determination of the effects of pollutants on soil flora - Part 1: Method for the measurement of inhibition of root growth
  • DS/EN ISO 2286-1:1999 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of the length, width and net mass
  • DS/EN 60885-3:2007 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
  • DS/ISO 3882:1986 Metallic and other non-organic coatings. Review of methods of measurement of thickness
  • DS/EN 1049-2:1994 Textiles-Woven fabrics-Construction-Methods of analysis-Part 2;Determination of number of threads per unit length

ES-UNE, Physical Length Measurement Method

  • UNE-EN 60793-1-22:2002 Optical fibres -- Part 1-22: Measurement methods and test procedures - Length measurement (Endorsed by AENOR in August of 2002.)
  • UNE-EN 12697-13:2018 Bituminous mixtures - Test methods - Part 13: Temperature measurement
  • UNE-EN 60885-3:2015 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
  • UNE-EN ISO 11269-1:2012 Soil quality - Determination of the effects of pollutants on soil flora - Part 1: Method for the measurement of inhibition of root growth (ISO 11269-1:2012) (Endorsed by AENOR in February of 2013.)

Professional Standard - Tobacco, Physical Length Measurement Method

  • YC/T 28.2-2002 Test of cigarette physical characteristics----Part 2:Length----Photoelectricity method
  • YC/T 37.1-2002 Test of filters physical characteristics----Part 1: Length----Photoelectricity method
  • YC/T 37.1-1996 Test of filters physical characteristics----Part 1: Length----Photoelectricity method
  • YC/T 28.2-1996 Test of cigarette physical characteristics----Part 2:Length----Photoelectricity method

TR-TSE, Physical Length Measurement Method

  • TS 1140-1973 METHOD OF TEST FOR FIBRE LENGTH OF WOLL AND SIMILAR FIBRES USING A SINGLE FIBRE LENGTH MEASURING MACHINE
  • TS 2361-1976 METHODS FOR THE MEASUREMENT OF AIR POLLUTION DETF.RMINATION OF CONCENTRATION OF SUSPENDED MATTER

VN-TCVN, Physical Length Measurement Method

  • TCVN 3582-1981 Textiles material.Wool fibres.Method for measurement of length
  • TCVN 5799-1994 Knitted fabrics and garments.Method for determination of yarn length in the loop
  • TCVN 7837-1-2007 Rubber.or plastics-coated fabrics.Determination of roll characteristics.Part 1: Methods for determination of length, width and net mass
  • TCVN 5962-1995 Soil quality.Determination of the effects of pollutants on soil flora.Method for the measurement of inhibition of root growth

CU-NC, Physical Length Measurement Method

  • NC 90-01-13-1985 Metrological Assurance. Length Measures with Divisions. Verification Methods and Means
  • NC 40-69-1984 Textiles. Determination of Length by Measurement of Single Chemical Staple Fibres Testing Method
  • NC 43-34-1987 Natural and Artificial Wood Industry. Natural Wood. Determination of Humidity Content by Means of Physical and Mechanical Tests. Testing Method
  • NC 90-01-44-1985 Metrological Assuranoe. PlanoParallel Measures with Nominal Length Greater Tlian 100 up to 1 000 mm, Verification Methods and Means
  • NC 38-02-15-1989 Food Sanitary Standards System Quantitative Determination of Escherichia Colli. Microbiological Testing Methods

KE-KEBS, Physical Length Measurement Method

  • KS 08-120-1981 KENYA STANDARD METHOD FOR DETERMINATION OF MASS PER UNIT LENGTH AND MASS PER UNIT AREA OF WOVEN OR KNITTED FABRICS

Indonesia Standards, Physical Length Measurement Method

  • SNI 03-3408-1994 Methods of measurement for flow velocity on physical models by current measuring instrument propeler types
  • SNI 08-4417-1997 Test method of tensile strength and elongation of geotextile, grab method
  • SNI 03-6455.5-2000 Methods measurement of discharge in open channels by rectangular weirs
  • SNI 08-4090-1996 Test method for determination of number of tufts and/or loops per unit length and per unit area of carpets
  • SNI ISO 7211-2:2010 Textiles - Woven fabric - Contruction - Method of analysis - Part 2: Determination of number of threads per unit length
  • SNI 01-2372.3-2006 Test method of physic - Part 3: Density determination of tomato sauce in packaged fishery products

KR-KS, Physical Length Measurement Method

  • KS K ISO 9863-2002 MEASURING METHOD FOR THICKNESS OF GEOTEXTILE
  • KS M ISO 2286-1-2017 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass
  • KS C IEC 60885-3-2019 Electrical test methods for electric cables — Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
  • KS A ISO 21727-2018(2023) Cinematography — Method of measurement of perceived loudness of short duration motion-picture audio material
  • KS K ISO 2060-2019 Textiles — Yarn from packages — Determination of linear density(mass per unit length) by the skein method
  • KS K ISO 7211-2-2022 Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length
  • KS K ISO 7211-2-2017 Textiles-Woven fabrics-Construction-Methods of analysis-Part 2:Determination of number of threads per unit length
  • KS I ISO 11269-1-2021 Soil quality — Determination of the effects of pollutants on soil flora —Part 1: Method for the measurement of inhibition of root growth

International Electrotechnical Commission (IEC), Physical Length Measurement Method

  • IEC 60793-1-22:2001 Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement

Group Standards of the People's Republic of China, Physical Length Measurement Method

  • T/BSPT 003-2018 Performance test method for fine particulate matter (PM2.5 )mass concentration measurement instruments based on light scattering principle
  • T/CNTAC 46-2020 A method for measuring the length of surface hairiness of nap-free fabrics projection counting method
  • T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter (PM2.5)mass concentration measurement instruments based on light scattering principle
  • T/CRES 0009-2022 Testing method of thermochemical energy storage temperature and energy density for solid compounds

AENOR, Physical Length Measurement Method

  • UNE 40152:1984 METHOD OF TEST FOR THE MEASURE OF LIBRE LENGTH BY INDIVIDUAL FIBRES TESTING
  • UNE-EN 14049:2005 Water application intensity - Calculation principles and measurement methods
  • UNE 80108:2010 Test Methods of cement: Physical analysis. Fineness determination by wet sieving.
  • UNE 80103:2013 Test methods of cements. Physical analysis. Actual density determination.
  • UNE-EN ISO 2060:1996 TEXTILES. YARN FROM PACKAGES. DETERMINATION OF LINEAR DENSITY (MASS PER UNIT LENGHT) BY THE SKEIN METHOD. (ISO 2060:1994).
  • UNE-EN 14049:2005/1M:2006 Irrigation techniques - Water application intensity - Calculation principles and measurement methods

AASHTO - American Association of State Highway and Transportation Officials, Physical Length Measurement Method

  • T 148-2007 Standard Method of Test for Measuring Length of Drilled Concrete Cores
  • T 148-2015 Standard Method of Test for Measuring Length of Drilled Concrete Cores
  • T 148-1997 Standard Method of Test for Measuring Length of Drilled Concrete Cores (ASTM Designation: C 174-87)

Professional Standard - Nuclear Industry, Physical Length Measurement Method

  • EJ/T 903.5-1994 Scintillator performance measurement method scintillation effective attenuation length

RO-ASRO, Physical Length Measurement Method

  • STAS SR EN 27726-1996 Thermal environments - Instruments and methods for measuring physical quantities
  • STAS 6200/10-1973 SHAPED NATURAL STONES FOR BUILDING Methods of physical, mechanical and mineralogical tests. Delermination of density and volume weight
  • STAS 6200/11-1973 SCHAPED NATURAL STONES FOR BUILDING Methods of physical, mechanical and mineralogical tests. Determination of apparent density and apparent volume weight
  • STAS 9484/12-1974 SILICA-ALUMINA MINING PRODUCTS Methods of physical and mechanical tests. Determination of whiteness
  • STAS 6200/6-1971 SHAPED NATURAL STONE FOR BUILDING Methods of physical, mechanical and mineralogical tests Detcrminalion [of the tcnsile strength

Canadian Standards Association (CSA), Physical Length Measurement Method

Xinjiang Provincial Standard of the People's Republic of China, Physical Length Measurement Method

  • DB65/T 4167-2018 Test method for average diameter, length and distribution of wool and other animal fibers

Professional Standard - Chemical Industry, Physical Length Measurement Method

  • HG/T 3050.1-2001 Rubber-or plastics-coated fabrics - Determination of roll characteristics - Part 1:Method for determination of length,width and net mass

工业和信息化部, Physical Length Measurement Method

  • HG/T 3050.1-2020 Determination of properties of whole rolls of rubber or plastic coated fabrics Part 1: Methods for determination of length, width and net mass
  • YS/T 1065.3-2015 Methods for determination of physical properties of zeolites Part 3: Gravimetric method for determination of loss on ignition
  • QB/T 5025-2017 Determination method of iridoside content in toothpaste for oral cleaning and care products
  • YS/T 1065.2-2015 Methods for determination of physical properties of zeolites Part 2: Determination of particle size Centrifugal sedimentation method
  • YS/T 273.9-2020 Methods for chemical analysis and physical properties of cryolite Part 9: Determination of phosphorus pentoxide content Molybdenum blue spectrophotometry
  • YS/T 273.1-2020 Methods of chemical analysis and physical properties of cryolite - Part 1: Gravimetric method for determination of wet water content

Lithuanian Standards Office , Physical Length Measurement Method

  • LST EN 14049-2004 Water application intensity - Calculation principles and measurement methods
  • LST EN 60793-1-22-2003 Optical fibres. Part 1-22: Measurement methods and test procedures. Length measurement (IEC 60793-1-22:2001)
  • LST EN 14049-2004/A1-2005 Irrigation techniques - Water application intensity - Calculation principles and measurement methods
  • LST EN ISO 11269-1:2013 Soil quality - Determination of the effects of pollutants on soil flora - Part 1: Method for the measurement of inhibition of root growth (ISO 11269-1:2012)
  • LST EN 60885-3-2004 Electrical test methods for electric cables. Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (IEC 60885-3:1988)

PT-IPQ, Physical Length Measurement Method

  • NP 2213-1986
  • NP EN 1097-2-2000 Tests for mechanical and physical properties of aggregates Part 2:Methods for the determination of resistance to fragmentation

国家市场监督管理总局、中国国家标准化管理委员会, Physical Length Measurement Method

  • GB/T 6609.30-2022 Chemical analysis methods and determination of physical performance of alumina—Part 30: Determination of trace elements—Wavelength dispersive X-ray fluorescence spectrometric method
  • GB/T 1927.3-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood
  • GB/T 41079.1-2021 Test methods for physical properties of liquid metals—Part 1: Determination of density

NL-NEN, Physical Length Measurement Method

  • NEN 3771-1979 Cheese - Physical and chemical test methods - Determination of the sodium and the potassium content by flame photometry
  • NEN 3235 8.3-1978 Test methods for waste water. Photometric rietermination of sulphide content
  • NEN 3761-1979 Cheese - Physical and chemical test methods - Determination of the chloride content (reference method)
  • NEN 3758-1980 Cheese - Physical and chemical test methods - Determination of the fat content (routine method)
  • NEN 3754-1981 Cheese - Physical and chemical test methods - Determination of the moisture content (reference method)
  • NEN 3757-1979 Cheese - Physical and chemical test methods - Determination of the fat content (reference method)

AT-ON, Physical Length Measurement Method

  • ONORM EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)

VE-FONDONORMA, Physical Length Measurement Method

ES-AENOR, Physical Length Measurement Method

TH-TISI, Physical Length Measurement Method

  • TIS 121.11-2010 Standard test methods for textiles.part 11: determination of fabric length
  • TIS 121.12-2010 Standard test methods for textiles.part 12: woven fabrics.determination of mass per unit length and mass per unit area

Tianjin Provincial Standard of the People's Republic of China, Physical Length Measurement Method

  • DB12/T 3012-2018 Cold chain logistics temperature and humidity requirements and measurement methods

Hebei Provincial Standard of the People's Republic of China, Physical Length Measurement Method

  • DB13/T 3012-2018 Cold chain logistics temperature and humidity requirements and measurement methods

Beijing Provincial Standard of the People's Republic of China, Physical Length Measurement Method

  • DB11/T 3012-2018 Cold chain logistics temperature and humidity requirements and measurement methods

PL-PKN, Physical Length Measurement Method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Physical Length Measurement Method

  • GJB 5382.4-2005 Test methods of physical parameter for pyrotechnic. Part 4: Determination of bulk density. Standard measuring cylinder method
  • GJB 5382.5-2005 Test methods of physical parameter for pyrotechnic. Part 5: Determination of bulk density. Glass measuring cylinder method
  • GJB 5382.2-2005 Test methods of physical parameter for pyrotechnic. Part 2: Determination of density. Pyknometer method
  • GJB 5382.3-2005 Test methods of physical parameter for pyrotechnic. Part 3: Determination of density for columnar (blocky) sample. Liquid static weighing method
  • GJB 5382.6-2005 Test methods of physical parameter for pyrotechnic. Part 6: Determination of particle size. Sieve method

Professional Standard - Machinery, Physical Length Measurement Method

  • JB/T 7780.1-1995 Test methods for mechanical and physical properties of wire rods for rivet contacts Test methods for density measurement of wire rods for rivet contacts
  • JB/T 7780.2-1995 Test methods for mechanical and physical properties of wire rods for rivet contacts Test methods for hardness measurement of wire rods for rivet contacts
  • JB/T 7780.1-2008 Methods for measuring mechanical and physical properies of wires for rivet contacts.Part 1:Determination of density
  • JB/T 7780.2-2008 Methods for measuring mechanical and physical properies of wires for rivet contacts.Part 2:Determination of hardness

YU-JUS, Physical Length Measurement Method

  • JUS B.D8.317-1986 Refractories. Methods forphisicat testing. Determinati'on ofparticle si?e distribution
  • JUS B.G8.151-1977 Methods of physcal testing of iron ores. Determination of tumbler strength
  • JUS B.D8.303-1991 Refractories. Methods ofphysical testing. Determination of refractoriness under load with rising temperature
  • JUS B.D8.321-1991 Refractories. Methods of physical testing. Determination ofmodulus ofrupture at elevated temperatu-res
  • JUS B.G8.152-1987 Methods of phisical testing of iron ores. tron ore pellets. Determination of crushing strength
  • JUS B.D8.307-1991 Refractories. Methods of physical testing. Determination ofmodulus ofrupture atambient temperatu-re

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Physical Length Measurement Method

(U.S.) Telecommunications Industries Association , Physical Length Measurement Method

  • TIA-455-133-A-2003(2013) FOTP- 133 IEC-60793-1-22 Optical Fibres- Part 1-22: Measurement Methods and Test Procedures- Length Measurement
  • TIA-455-133-A-2003 FOTP- 133 IEC-60793-1-22 Optical Fibres- Part 1-22: Measurement Methods and Test Procedures- Length Measurement

Professional Standard - Non-ferrous Metal, Physical Length Measurement Method

  • YS/T 438.1-2001 Methods for physical performance determination of sandy alumina.Determination of size distribution.Sieving method
  • YS/T 581.6-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 6:Determination of silica content by the molybdenum blue photometric
  • YS/T 273.6-2006 Chemical analysis methods and physical properties of cryolite. Part 6:Determination of silica content by the molybdenum blue photometric
  • YS/T 581.4-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 4:Determination of aluminium by the EDTA volumetric method
  • YS/T 273.4-2006 Chemical analysis methods and physical properties of cryolite. Part 4:Determination of aluminium by the EDTA volumetric method
  • YS/T 581.9-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 9:Determination of phosphoruo content by molybdophoshoric liue photometric method
  • YS/T 273.9-2006 Chemical analysis methods and physical properties of cryolite. Part 1:Determination of phosphorous pentoxide by molybdenum blue photometric method
  • YS/T 581.1-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 1:Determination of moisture content by gravimetric method
  • YS/T 273.1-2006 Chemical analysis methods and physical properties of cryolite. Part 1:Determination of moisture content by gravimetric method
  • YS/T 581.7-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 7:Determination of iron content by orthophenantholine photometric method
  • YS/T 273.7-2006 Chemical analysis methods and physical properties of cryolite. Part 7:Determination of iron content by orthophenantholine photometric method
  • YS/T 581.14-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 14:Determination of untamped density
  • YS/T 273.10-2006 Chemical analysis methods and physical properties of cryolite. Part 10:Determination of alumina content by gravimetric method

Society of Automotive Engineers (SAE), Physical Length Measurement Method

  • SAE J1355-2010 Test Method for Measuring Thickness of Resilient Insulating paddings
  • SAE J882-2012 Test Method for Measuring Thickness of Automotive Textiles and plastics
  • SAE J882-2007 Test Method for Measuring Thickness of Automotive Textiles and Plastics

Professional Standard - Electricity, Physical Length Measurement Method

  • DL/T 702-1999 Determination of furfural content in mineral insulating oil by spectrophotometric method

GB-REG, Physical Length Measurement Method

European Committee for Standardization (CEN), Physical Length Measurement Method

  • EN ISO 2286-1:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass (ISO 2286-1:2016)
  • EN ISO 11269-1:2012 Soil quality - Determination of the effects of pollutants on soil flora - Part 1: Method for the measurement of inhibition of root growth
  • EN 29073-3:1992 Textiles - Test Methods for Nonwovens - Part 3: Determination of Tensile Strength and Elongation
  • EN 13041:2011 Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space

European Telecommunications Standards Institute (ETSI), Physical Length Measurement Method

  • ETSI EG 202 765-3-2009 Speech and multimedia Transmission Quality (STQ); QoS and network performance metrics and measurement methods; Part 3: Network performance metrics and measurement methods in IP networks V1.1.1
  • ETSI EG 202 765-3-2010 Speech and multimedia Transmission Quality (STQ); QoS and network performance metrics and measurement methods; Part 3: Network performance metrics and measurement methods in IP networks (V1.1.2)

IEC - International Electrotechnical Commission, Physical Length Measurement Method

  • PAS 62483-2006 Test method for measuring whisker growth on tin and tin alloy surface finishes (Edition 1.0)

Natural Gas Processor's Association (NGPA), Physical Length Measurement Method

  • GPA STD 2188-1989 Tentative Method for the Determination of Ethyl Mercaptan in Lp-Gas Using Length of Stain Tubes

European Committee for Electrotechnical Standardization(CENELEC), Physical Length Measurement Method

  • EN 60793-1-22:2002 Optical Fibres Part 1-22: Measurement Methods and Test Procedures - Length Measurement




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved