ZH
RU
ES

Forward aspiration

Forward aspiration, Total:496 items.

In the international standard classification, Forward aspiration involves: Pumps, Semiconductor devices, Construction materials, Products of the textile industry, Road vehicles in general, Fluid power systems, Earth-moving machinery, Small craft, Optoelectronics. Laser equipment, Mechanical testing, Cutting tools, Hydraulic energy engineering, Optics and optical measurements, Metalliferous minerals, Vocabularies, Road vehicle systems, Protective equipment, Internal combustion engines, Internal combustion engines for road vehicles, Analytical chemistry, Acoustics and acoustic measurements, Aids for disabled or handicapped persons, Rectifiers. Convertors. Stabilized power supply, Water quality, Agricultural machines, implements and equipment, Test conditions and procedures in general, Medical sciences and health care facilities in general, Protection against dangerous goods, Petroleum products in general, Inorganic chemicals, Rubber and plastics products, Fuels, Paper and board, Protection against crime, Waxes, bituminous materials and other petroleum products, Fasteners for aerospace construction, Surface treatment and coating, Organic chemicals, Measurement of fluid flow, Electronic display devices, Valves, Ventilators. Fans. Air-conditioners, Wastes, Veterinary medicine, Farming and forestry, Lubricants, industrial oils and related products, Company organization and management, Particle size analysis. Sieving, Commercial vehicles, Vibrations, shock and vibration measurements, Pharmaceutics, Tobacco, tobacco products and related equipment, Products of the chemical industry, Fertilizers, Paints and varnishes, Construction industry, Crude petroleum, Textile fibres, Food products in general, Environmental protection, Non-ferrous metals, Meat, meat products and other animal produce, Air quality, Animal feeding stuffs, Soil quality. Pedology, Protection against fire, Equipment for petroleum and natural gas industries, Fluid storage devices, Cycles, Aerospace fluid systems and components, Corrosion of metals, Road engineering, Reinforced plastics, Milk and milk products, Plastics, Environmental testing, Photography, Laboratory medicine.

CU-NC, Forward aspiration

NC 48-33-1984 Hydraulio Kngineering. Axial Suetioner, Quality Specifications
NC 90-04-08-1984 Metrological Assurance Pipettes fop General Use. Verification Methods and Means

RU-GOST R, Forward aspiration

GOST 33967-2016 Centrifugal pumps pumping viscous liquids. Corrections for operating characteristics
GOST 18986.9-1973 Semiconductor diodes. Method for measuring pulse direct voltage and forword recovery time
GOST R 55002-2012 Hydraulic machines, radial and axial. Performance conversion method from model to prototype
GOST R 52453-2005 Vehicles. Steering devices with the hydraulic boosters and steering hydraulic boosters. Technical requirements and test methods
GOST R ISO 17190-6-2017 Urine-absorbing aids for incontinence. Test methods for characterizing polymer-based absorbent materials. Part 6. Gravimetric determination of fluid retention capacity in saline solution after centrifugation
GOST 31872-2012 Liquid petroleum products. Determination of hydrocarbon types by method of fluorescent indicator adsorption
GOST R 52063-2003 Liquid petroleum products. Test method of hydrocarbon types by fluorescent indicator adsorption
GOST EN 1110-2011 Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of head resistance
GOST R EN 237-2008 Liquid petroleum products. Determination of low lead concentrations by atomic absorption spectrometry
GOST EN 237-2013 Liquid petroleum products. Determination of low lead concentrations by atomic absorption spectrometry
GOST 32474-2013 Testing of chemicals of environmental hazard. Partition Coefficient (n-octanol/water), HPLC Method
GOST EN 12039-2011 Roofing and hydraulic-insulating flexible bitumen-based materials. Method for determination of granules to coating layer adhesion
GOST EN 15688-2016 Fertilizers. Determination of urease inhibitor N-(n-butyl)thiophosphoric triamide using high-perfomance liquid chromatography
GOST R 12.4.276-2-2012 Occupational safety standards system. Respiratory protective devices. Compressed air line supply breating apparatus. Part 2. Apparatus with half mask at positive pressure. Requirements. Test methods. Marking
GOST R 12.4.278-2012 Occupational safety standards system. Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask, designed to be used with positive pressure only. Technical requirements. Test methods. Marking

NATO - North Atlantic Treaty Organization, Forward aspiration

STANAG 3545-1975 Characteristics of Breathable Liquid Oxygen (ED 2; Amendment 6: 1991; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.

Taiwan Provincial Standard of the People's Republic of China, Forward aspiration

CNS 13298-1993 Method of Test for Water Permeability of Geotextiles by Permittivity
CNS 8304-1982 Methods of Test for n - Hexane Extract in Waste Water Liquid Extraction Method
CNS 3577-1973 Method of Test for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
CNS 13381-1994 Method of Analysis for Total Cadmium in Wastes by Flame Absorption Spectrometry

Korean Agency for Technology and Standards (KATS), Forward aspiration

KS R 1148-2012 Steering system impact absorption test method
KS R 1148-2002(2007) Steering system impact absorption test method
KS B ISO 9533:2012 Earth-moving machinery-Machine-mounted forward and reverse audible warning alarm-Sound test method
KS L 6515-2002 Testing method for capillarity of artificial abrasives
KS I 4042-2019 Test methods for remanufactured steering hydraulic cylinder of forklifts
KS B ISO 9533-2012(2022) Earth-moving machinery－Machine-mounted forward and reverse audible warning alarm－Sound test method
KS B ISO 3723:2007 Hydraulic fluid power-Filter elements-Method for end load test
KS B ISO 3723:2016 Hydraulic fluid power－Filter elements－Method for end load test
KS B 6513-1991(2016) Test Methods for Electro-hydraulic Proportional Directional Bypass Flow Control Va1ves
KS B 6511-1991(2011) Test Methods for Electro-Hydraulic Proportional Directional Series Flow Control Valves
KS B 6513-1991(2021) Test Methods for Electro-hydraulic Proportional Directional Bypass Flow Control Va1ves
KS P ISO 17190-6:2011 Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 6：Gravimetric determination of fluid retention capacity in saline solution after centrifugation
KS P ISO 17190-7-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 7：Gravimetric determination of absorption under pressure
KS I 4037-2019 Test methods of remanufactured hydraulic type power steering gearbox for passenger cars
KS M ISO 3837:2003 Liquid petroleum products-Determination of hydrocarbon types-Fluorescent indicator adsorption method
KS P ISO 17190-6-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 6：Gravimetric determination of fluid retention capacity in saline solution after centrifuga
KS B ISO 10770-1-2003(2008) Hydraulic fluid power－Electrically modulated hydraulic control valves－Part 1：Test methods for four-way directional flow control valves
KS M ISO 3837-2003(2018)
KS P ISO 17190-9-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 9：Gravimetric determination of density
KS R ISO 14512:2008 Passenger cars－Straight-ahead braking on surfaces with split coefficient of friction－Open-loop test method
KS P ISO 17190-3:2021 Urine-absorbing aids for incontinence -- Polyacrylate superabsorbent powders –Part 3: Test method for determination of the particle size distribution by sieve fractionation
KS P ISO 17190-8:2021 Urine-absorbing aids for incontinence - Polyacrylate superabsorbent powders - Part 8:Test method for determination of the permeability dependent absorption under pressure of saline solution by gravime
KS B ISO 10770-2-2002(2012) Electrically modulated hydraulic control valves－Part 2：Test methods for three-way directional flow control valves
KS M ISO 12917-1:2003 Petroleum and liquid petroleum products－Calibration of horizontal cylindrical tanks－Part 1：Manual methods
KS H ISO 9233-2006(2016) Cheese and cheese rind -- Determination of natamycin content -- Method by molecular absorption spectrometry and by high-performance liquid chromatography
KS M ISO 2812-3:2013 Paints and varnishes ㅡ Determination of resistance to liquids ㅡ Part 3: Method using an absorbent medium
KS M ISO 2812-3:2012 Paints and varnishes-Determination of resistance to liquids-Part 3:Method using an absorbent medium
KS P ISO 17190-6:2021 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders –Part 6: Test method for determination of the fluid retention capacity in saline solution by gravimetric measurement followi
KS H ISO 9233:2006 Cheese and cheese rind－Determination of natamycin content－Method by molecular absorption spectrometry and by high-performance liquid chromatography
KS H ISO 9233:2021 Cheese and cheese rind — Determination of natamycin content —Method by molecular absorption spectrometry and by high-performance liquid chromatography
KS M ISO 2812-3-2013(2018) Paints and varnishes ㅡ Determination of resistance to liquids ㅡ Part 3: Method using an absorbent medium

Professional Standard - Coal, Forward aspiration

MT/T 707-1997 Method for identifying tendency of coal to spontaneous combustion by oxygen adsorption with chromatograph
MT/T 489-1995 Test method of mine hydraulic axial piston pump
MT/T 572-1996 Test method for mining hydraulic multi-way reversing valve
MT/T 544-1996 Test method for mining hydraulic oblique axis axial piston motor

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Forward aspiration

GB/T 20104-2006 Method for identfying tendency of coal to spontaneous combustion by oxygen absorption with chromatograph
GB/T 6730.83-2022 Iron ores—Determination of loss on ignition—Gravimetric method corrected by hygroscopic water
GB/T 14041.4-1993 Hydraulic fluid power.Filter elements.Method for end load test
GB/T 6323.4-1994 Controllability and stability test procedure for automobiles-Returnability test
GB/T 20405.5-2006 Urine-absorbing aids for incontinence.Test methods for characterizing Polymer-based absorbent materials.Part 5:Gravimetric determination of free swell capacity in saline solution
GB/T 30119-2013 Preparation method of calibration solution for atomic absorption measurement
GB/T 21780-2008 ParticaI size analysis.Sedimentation analysis in the gravitational field.Pipette method
GB/T 11132-2002 Standard test method for hydrocarbon types in liquid petroleum products by fluorescent indicator adsorption
GB/T 20405.1-2006 Urine-absorbing aids for incontinence.Test methods for characterizing Polymer-based absorbent materials.Part 1:Determination of pH
GB/T 20405.3-2006 Urine-absorbing aids for incontinence. Test methods for characterizing Polymer-based absorbent materials. Part 3: Determination of particle size distribution by sieve fractionation
GB/T 461.1-2002 Paper and board determination of capillary rise-Klemm methods
GB/T 20405.2-2006 Urine-absorbing aids for incontinence. Test methods for characterizing Polymer-based absorbent materials. Part 2: Determination of amount of residual monomers
GB/T 12575-1990 Liquid fuel oils--Determination of vanadium content--Flameless atomic absorption spectroscopic method
GB/T 20405.4-2006 Urine-absorbing aids for incontinence. Test methods for characterizing Polymer-based absorbent materials. Part 4: Determination of moisture content by mass loss upon heating
GB/T 25274-2010 Films for liquid crystal display(LCD).Determination of ultraviolet absorbance
GB/T 11132-2008 Standard test method for hydrocarbon types in liquid petroleum products by fluorescent indicator adsorption
GB/T 11132-2022 Test method for hydrocarbon types in liquid petroleum products—Fluorescent indicator adsorption
GB/T 21852-2008 Chemicals.Partition coefficient(n-octanol/water).High performance liquid chromatography(HPLC)method
GB/T 15623.1-2003 Hydraulic fluid power--Electrically modulated hydraulic control valves--Part 1:Test methods for four-way directional flow control valves
GB/T 15623.2-2003 Hydraulic fluid power--Electrically modulated hydraulic control valves--Part 2:Test methods for three-way directional flow control valves
GB/T 8570.6-2010 Determination of liquefied anhydrous ammonia.Part 6:Oil content.Gravimetric and infra-red methods
GB/T 25221-2010 Inspection of grain and oils.Determination of ergosterol in grain.Normal phase high performance liquid chromatography
GB/T 27860-2011 Chemicals. Estimation of the adsorption coefficient (K) on soil and on sewage sludge using high performance liquid chromatography (HPLC)
GB/T 8220.5-1998 Methods for chemical analysis bismuth--Determination of zinc content--Solid-liquid extraction-flame atomic absorption spectrophotometric method
GB/T 17077-1997 Workplace air--Determination of dimethyl sulphate--Solvent desorption liquid chromatographic method
GB/T 12373-1990 Standard sampling equipments of liquid absorbent methods for determining gaseous pollutants in air of residential areas
GB/T 24572.3-2009 Standard practice for separation and concentration of ignitable liquid residues from fire debris samples.Part 3: Activated charcoal absorption
GB/T 30648.3-2015 Paints and varnishes.Determination of resistance to liquids.Part 3: Method using an absorbent medium
GB/T 25248-2010 Determination of infrared cyanine dye for 830nm digital printing materials.High performance liquid chromatography
GB/T 16634-1996 Industrial circulating cooling water--Determination of zinc for phosphorus-zinc prefilming fluid--Atomic absorption spectrometric method
GB/T 16635-1996 Industrial circulating cooling water--Determination of calcium for phosphorus-zinc prefilming fluid--Atomic absorption spectrometric method

Professional Standard - Machinery, Forward aspiration

JB/T 8729.2-1998 Hydraulic fluid fower.Multiple directional valve.Test methods
JB/T 7044-1993 Test methods for hydraulic axial piston pumps
JB/T 12043.2-2015 Hydraulic timing advance plunger for diesel engine.Part 2: Test method
JB/T 5183-2002 Test method of hydrostatic steering system for wheeled tractors
JB/T 9355-1999 Preparation method of calibration solution for the measurement of atomic absorption
JB/T 9829-1999 Open-center hydrostatic steering system of wheeled tractor - Test method
JB/T 10964-2010 Special equipment of wet flue gas desulfurization system.Slurry nozzle for absorber
JB/T 9358-1999 Test method for fixed wavelength (254nm) UV detector used in liquid chromatography
JB/T 5919-1991 Dimensions and markings of crankshaft connecting rod radial plugging hydraulic motor mounting flange and shaft extension (1)

CZ-CSN, Forward aspiration

CSN ISO 9533:1993 Earth-moving machinery. Machine-mounted forward and reverse audible warning alarm. Sound test method
CSN 35 8757 Cast.6-1985 Measuring method of static value of the common-emitter forward ourrent transfer ratio
CSN 35 8757 Cast.7-1985 Transistors. Measuring method of absolute value of forward current transfer ratio and transition frequency
CSN 11 9313-1987 Unified system of industrial hydraulic components. Axial piston and vane hydraulic generators and hydraulic motors. Testing methods
CSN 35 8757 Cast.2-1985 Transistors. Measuring method of common-emitter small-signal short-circuit forward current transfer ratio
CSN 65 6152-1970 Hydrocarbon types in liquid petroleum roducts by fluorescent indikátor ad- orption (FIA method)

German Institute for Standardization, Forward aspiration

DIN EN ISO 10592/A100:2017 Small craft - Hydraulic steering systems (ISO 10592:1994); German version EN ISO 10592:2017; Amendment A100
DIN 51774-3:1989 Testing of liquid fuels; determination of bromine acceptance by iodometric method (BC)
DIN EN 241:2000-12 Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method; German version EN 241:2000
DIN EN 241:2000 Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method; German version EN 241:2000
DIN EN 13131:2000-12 Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method; German version EN 13131:2000
DIN EN 237:2004-12 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry; German version EN 237:2004
DIN EN 237:2004 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry; German version EN 237:2004
DIN EN 13131:2000 Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method; German version EN 13131:2000
DIN EN 16651:2015 Fertilizers - Determination of N-(n-Butyl)thiophosphoric acid triamide (NBPT) and N-(n-Propyl)thiophosphoric acid triamide (NPPT) - Method using high-performance liquid chromatography (HPLC); German version EN 16651:2015
DIN EN 16651:2015-07 Fertilizers - Determination of N-(n-Butyl)thiophosphoric acid triamide (NBPT) and N-(n-Propyl)thiophosphoric acid triamide (NPPT) - Method using high-performance liquid chromatography (HPLC); German version EN 16651:2015
DIN EN ISO 2812-3:2019-08 Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2019); German version EN ISO 2812-3:2019
DIN 51865-3:1998 Testing of gaseous fuels and other gases - Determination of mercury content - Part 3: Absorption in solutions, atomic absorption spectrometry (AAS)
DIN EN ISO 2812-3:2007 Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2007)English version of DIN EN ISO 2812-3:2007-05
DIN EN ISO 8973:2020 Liquefied petroleum gases - Calculation method for density and vapour pressure (ISO 8973:1997 + Amd 1:2020) (includes Amendment :2020)
DIN EN 13103-1:2023 Railway applications - Wheelsets and bogies - Part 1: Design method for axles with external journals (includes Amendment A1:2022)
DIN EN 1911-3:1998 Stationary source emissions - Manual method of determination of HCl - Part 3: Absorption solutions analysis and calculation; German version EN 1911-3:1998
DIN 51797-4:1981 Testing of liquid fuels; determination of the sodium content; direct determination by atomic absorption spectroscopy

IT-UNI, Forward aspiration

UNI 5691-1965

Professional Standard - Electron, Forward aspiration

SJ 2354.4-1983 Method of measurement for forward voltage drop of PIN and avalanche photodiodes
SJ 2214.2-1982 Method of measurement for forward voltage of semiconductor photodiodes
SJ 2355.2-1983 Method of measurement for forward voltage drop of light-emitting devices
SJ 2658.2-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for forward voltage drop
SJ 2215.3-1982 Method of measurement for forward current of semiconductor photocouplers (diodes)
SJ 2215.2-1982 Method of measurement for forward voltage of semiconductor photocouplers (diodes)
SJ 1786-1981 Method of measurement for forward voltage of silicon single phase bridge rectifiers,up to 5A
SJ 2658.5-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for forward series resistance
SJ/T 2658.2-2015 Measuring method for semiconductor infrared-emitting diode.Part 2: Forward voltage

PL-PKN, Forward aspiration

PN T01504-21-1987 Transistors Measurint! methods Forward current transfer ratio /!2i, at Iow fre?uency
PN E04418-1988 Insulating liquids Method tor determination ol gassing tendency in electric field
PN P50153-1965 Testing me?hods for products of paper industry De?ermina?ion of ?be absorp?ion of liquids (weighing method)
PN-EN 16651-2015-09 P Fertilizers--Determination of N-(n-Butyl)thiophosphoric acid triamide (NBPT) and N-(n-Propyl)thiophosphoric acid triamide (NPPT)--Method using high-performance liquid chromatography (HPLC)

Indonesia Standards, Forward aspiration

SNI 07-6733-2002 Test methods for elasticity of modulus, tangen of modulus, and chord of modulus

Association Francaise de Normalisation, Forward aspiration

NF C55-497:2009 Hydraulic machines, radial and axial - Performance conversion method from model to prototype.
NF V37-530/A1*NF EN ISO 12863/A1:2016 Standard test method for assessing the ignition propensity of cigarettes - Amendment 1
NF EN IEC 62097:2019 Machines hydrauliques, radiales et axiales - Méthodologie de transposition des performances du modèle au prototype
NF S76-007-1*NF EN 13274-1:2001 Respiratory protective devices - Methods of test - Part 1 : determination of inward leakage and total inward leakage
NF EN 16302:2013 Conservation des biens culturels - Méthodes d'essai - Mesurage de l'absorption d'eau par la méthode à la pipette
NF M41-014/A1*NF EN ISO 8973/A1:2020 Liquefied petroleum gases - Calculation method for density and vapour pressure - Amendment 1
NF M07-037*NF EN 241:2000 Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method
NF EN 241:2000 Produits pétroliers liquides - Détermination de la teneur en sodium - Méthode par spectrométrie d'absorption atomique
NF EN 13131:2000 Produits pétroliers liquides - Détermination de la teneur en nickel et en vanadium - Méthode par spectrométrie d'absorption atomique
NF M07-024:1969 Liquid fuels. Determination of hydrocarbon groups in liquid petroleum products. Adsorption method in presence of fluorescent indicators.
NF ISO 3723:2015 Transmissions hydrauliques - Éléments filtrants - Méthode de détermination de la résistance à la déformation axiale
NF E48-440-1*NF ISO 10770-1:2009 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1 : test methods for four-port directional flow-control valves
NF S76-020-1:2015 Respiratory protective devices - Methods of test and test equipment - Part 1 : determination of inward leakage
NF S76-020-1*NF ISO 16900-1:2019 Respiratory protective devices - Methods of test and test equipment - Part 1 : determination of inward leakage
NF M41-016/A1*NF EN ISO 13758/A1:2020 Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method - Amendment 1
NF EN ISO 13758/A1:2020 Gaz de pétrole liquéfiés - Évaluation de la siccité du propane - Méthode de givrage de vanne - Amendement 1
NF M07-067*NF EN 13131:2000 Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method
NF P50-755/A1*NF EN ISO 15148/A1:2016 Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion - Amendment 1
NF R15-602-5:2020 Véhicules routiers - Méthodes d'essais de liquides de refroidissement - Partie 5 : mesurage de la tendance au moussage
NF M07-061*NF EN 237:2005 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry.
NF M07-061:1996 Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry.
NF U42-120*NF EN 16651:2015 Fertilizers - Determination of N-(n-Butyl)thiophosphoric acid triamide (NBPT) and N-(n-Propyl)thiophosphoric acid triamide (NPPT) - Method using high-performance liquid chromatography (HPLC)
NF X11-683:1981
NF T30-053-3:2012 Paints and varnishes - Determination of resistance to liquids - Part 3 : method using an absorbent medium.
NF M07-081:1994 Liquid petroleum products. Determination of high lead concentrations in fuels. Method by atomic absorption spectrometry.
NF EN 16651:2015 Engrais - Dosage du N-(n-butyl)triamide de l'acide thiophosphorique (NBPT) et du N-(n-propyl)triamide de l'acide thiophosphorique (NPPT) - Méthode par chromatographie liquide à haute performance (HPLC)
NF T30-053-3*NF EN ISO 2812-3:2019 Paints and varnishes - Determination of resistance to liquids - Part 3 : method using an absorbent medium
NF EN ISO 2812-3:2019 Peintures et vernis - Détermination de la résistance aux liquides - Partie 3 : méthode utilisant un milieu absorbant
NF EN 6059-305:2019 Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 305 : absorption des fluides
NF P98-846-53*NF EN 13286-53:2005 Unbound and hydraulically bound mixtures - Part 53 : methods for the manufacturre of test specimens of hydraulically bound mixtures using axial compression
NF EN 15688:2008 Engrais - Détermination de l'inhibiteur d'uréase N-(n-butyl) triamide thiophosphorique (NBPT) par chromatographie liquide haute performance (HPLC)
NF V18-235*NF EN 15781:2009 Animal feeding stuffs - Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation

International Electrotechnical Commission (IEC), Forward aspiration

IEC 62097:2019 Hydraulic machines, radial and axial – Methodology for performance transposition from model to prototype
IEC 62097:2009 Hydraulic machines, radial and axial - Performance conversion method from model to prototype

Danish Standards Foundation, Forward aspiration

DS/EN 62097:2009 Hydraulic machines, radial and axial - Performance conversion method from model to prototype
DS/EN 13274-1:2001 Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage
DS/ISO 3723:1989 Hydraulic fluid power. Filter elements. Method for end load test
DS/ISO 13160:2021 Water quality – Strontium 90 and strontium 89 – Test methods using liquid scintillation counting or proportional counting
DS/ISO 17190-6:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 6: Test method for determination of the fluid retention capacity in saline solution by gravimetric measurement following centrifugation
DS/ISO 17190-8:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 8: Test method for determination of the permeability dependent absorption under pressure of saline solution by gravimetric measurement
DS/EN 241:2000 Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method
DS/ISO 17190-6:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation
DS/ISO 17190-7:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 7: Test method for gravimetric determination of absorption against pressure
DS/EN 13131:2000 Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method
DS/ISO 17190-11:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 11: Determination of content of respirable particles
DS/ISO 17190-7:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 7: Gravimetric determination of absorption under pressure
DS/ISO 17190-5:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 5: Gravimetric determination of free swell capacity in saline solution
DS/EN 237:2004 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
DS/ISO 17190-3:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 3: Determination of particle size distribution by sieve fractionation
DS/ISO 17190-1:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 1: Determination of pH
DS/ISO 17190-5:2020 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders – Part 5: Test method for determination of the free swell capacity in saline by gravimetric measurement
DS/ISO 17190-8:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 8: Gravimetric determination of flowrate
DS/EN ISO 2812-3:2012 Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
DS/ISO 17190-2:2003 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 2: Determination of amount of residual monomers

European Committee for Electrotechnical Standardization（CENELEC）, Forward aspiration

EN IEC 62097:2019 Hydraulic machines, radial and axial - Methodology for performance transposition from model to prototype

AENOR, Forward aspiration

UNE-EN 62097:2012 Hydraulic machines, radial and axial - Performance conversion method from model to prototype
UNE 81583:1992 AIR QUALITY. WORKPLACE ATMOSPHERES. DETERMINATION OF ALIPHATIC HYDROCARBONS (N-HEXANE, N-HEPTANE, N-OCTANE, N-NONANE) IN AIR. CHARCOAL TUBE/SOLVENT DESORPTION/GAS CHROMATOGRAPHIC METHOD.
UNE 153601-2:2008 Urine-absorbing aids - Incontinence-absorbing aids - Part 2: Test methods for determining the rewet
UNE 81591:1991 BIOLOGICAL CONTROL. DETERMINATION OF LEAD IN BLOOD. EXTRACTION METHOD. ATOMIC ABSORPTION SPECTROMETRY.
UNE 81590:1992 BIOLOGICAL CONTROL. DETERMINATION OF LEAD IN BLOOD. GRAPHITE FURNACE METHOD. ATOMIC ABSORPTION SPECTROMETRY.
UNE 153601-1:2008 Urine-absorbing aids - Incontinence-absorbing aids - Part 1: Test methods for determining the absortion capacity before leakeages using mannequins
UNE-EN 241:2000 Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method.
UNE-EN 13131:2000 LIQUID PETROLEUM PRODUCTS. DETERMINATION OF NICKEL AND VANADIUM CONTENT. ATOMIC ABSORPTION SPECTROMETRIC METHOD.
UNE-EN 237:2005 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
UNE 81595:1998 BIOLOGICAL CONTROL. DETERMINATION OF MERCURY IN URINE. COLD VAPOUR - SODIUM BOROHIDRIDE METHOD. ATOMIC ABSORPTION SPECTROMETRY.

ES-UNE, Forward aspiration

UNE-EN IEC 62097:2019 Hydraulic machines, radial and axial - Methodology for performance transposition from model to prototype (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 8973:1999/A1:2020 Liquefied petroleum gases - Calculation method for density and vapour pressure - Amendment 1 (ISO 8973:1997/Amd 1:2020)
UNE-EN ISO 13758:1999/A1:2020 Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method - Amendment 1 (ISO 13758:1996/Amd 1:2020)
UNE-EN 16651:2016 Fertilizers - Determination of N-(n-Butyl)thiophosphoric acid triamide (NBPT) and N-(n-Propyl)thiophosphoric acid triamide (NPPT) - Method using high-performance liquid chromatography (HPLC)
UNE-EN ISO 2812-3:2020 Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2019)

BELST, Forward aspiration

STB GOST R 52453-2011 Vehicles. Steering devices with the hydraulic boosters and steering hydraulic boosters. Technical requirements and test methods

Group Standards of the People's Republic of China, Forward aspiration

T/DLSHXH 010-2023 Standard column for normal phase test of liquid chromatograph
T/SBX 046-2021 Method for Determination of Elastic Coefficient of Nematic Thermotropic Liquid Crystal
T/JPMA 014-2022 Schistosoma haematobium egg detection urine filtration microscopy
T/ZJSAE 015-2023 Technical requirements and test methods of integrated electric-hydraulic steering gear controlled by wire for commercial vehicles
T/SBX 027-2019 Determination of Resistivity of Nematic Thermotropic Liquid Crystal Monomer by DC Voltage Method
T/CECS 743-2020 Partial immersion test method standard for liquid water absorption of building materials and products
T/ZJSAE 005-2022 Heavy duty truck hydraulic power steering gear durability technical requirement and test method

Professional Standard - Environmental Protection, Forward aspiration

HJ 1068-2019 Determination of soil particle size with the pipette method and the hydrometer method
HJ 1154-2020 Determination of aldehydes and ketones in ambient air by solution absorption-high performance liquid chromatography
HJ 1153-2020 Determination of aldehydes and ketones in waste gas from stationary pollution sources Solution absorption-high performance liquid chromatography
HJ 1042-2019 Ambient air and waster gas-Determination of trimethylamine-Solvent absorption-Headspace/gas chromatography

European Committee for Standardization (CEN), Forward aspiration

CEN EN 13274-1-2001 Respiratory Protective Devices - Methods of Test - Part 1: Determination of Inward Leakage and Total Inward Leakage
EN 24185:1993/AC:1993 Measurement of liquid flow in closed conduits; weighing method (ISO 4185:1990); amendment
prEN ISO 10534-2 Acoustics - Determination of acoustic properties in impedance tubes - Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance (ISO/DIS 10534-2:2022)
EN ISO 2812-3:2012 Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2012)
EN 12177:1998/AC:2000 Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography; Amendment AC
EN ISO 13160:2021 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2021)

Lithuanian Standards Office , Forward aspiration

LST EN 13274-1-2002 Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage
LST EN 62097-2009 Hydraulic machines, radial and axial - Performance conversion method from model to prototype (IEC 62097:2009)
LST EN 241-2000 Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method
LST EN 13131-2000 Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method
LST EN 237-2004 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
LST EN ISO 4210-5:2014 Cycles - Safety requirements for bicycles - Part 5: Steering test methods (ISO 4210-5:2014, Corrected version 2015-02-01)

American Society for Testing and Materials (ASTM), Forward aspiration

ASTM D6854-03 Standard Test Method for Silica8212;n-Dibutyl Phthalate Absorption Number
ASTM E111-04(2010) Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
ASTM D5112-98(2003) Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
ASTM D5112-98(2009) Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
ASTM UOP699-09 Sodium in Liquefied Petroleum Gas by AAS
ASTM D5455-93(1998) Standard Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test)
ASTM D5455-93(2003) Standard Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test)
ASTM C187-16 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
ASTM D3711-95(2005) Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors
ASTM D3711-95(2000)e1 Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors
ASTM D3711-95 Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors
ASTM D3711-95(2009) Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors
ASTM D6574-00 Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
ASTM D6574-00(2006) Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
ASTM E1600-07 Standard Test Method for Determination of Gold in Cyanide Solutions by Atomic Absorption Spectrometry
ASTM D7622-10 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D8024-23 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM D8024-16 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM E1600-02 Standard Test Method for Determination of Gold in Cyanide Solutions by Atomic Absorption Spectrometry
ASTM E1600-96 Standard Test Method for Determination of Gold in Cyanide Solutions by Atomic Absorption Spectrometry
ASTM E1600-13 Standard Test Method for Determination of Gold in Cyanide Solutions by Flame Atomic Absorption Spectrometry
ASTM E1600-15 Standard Test Methods for Determination of Gold in Cyanide Solutions
ASTM D1319-13 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D1319-10 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D8018-15(2020) Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM D1319-14 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D1319-02 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D1319-99 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D1319-02a Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D1319-03e1 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D1319-03 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D1319-95a Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Absorption
ASTM D1319-89 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Absorption
ASTM D1319-08 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D7622-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D7622-10(2015) Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D1319-15 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D7622-10e1 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

British Standards Institution (BSI), Forward aspiration

BS EN ISO 10534-2:2023 Acoustics. Determination of acoustic properties in impedance tubes - Two-microphone technique for normal sound absorption coefficient and normal surface impedance
BS EN 13274-1:2001 Respiratory protective devices - Methods of test - Determination of inward leakage and total inward leakage
BS EN IEC 62097:2019 Tracked Changes. Hydraulic machines, radial and axial. Methodology for performance transposition from model to prototype
BS 4258-8:1978 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of calcium content (flame atomic absorption method)
BS ISO 19699-1:2017 Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood. Test methods
BS ISO 16900-1:2014 Respiratory protective devices. Methods of test and test equipment. Determination of inward leakage
BS 7709-5:1993 Analysis of extract solutions of glass. Method for determination of iron (III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry
BS ISO 17190-7:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for gravimetric determination of absorption against pressure
BS 3424-18:1986 Testing coated fabrics - Methods 21A and 21B - Methods for determination of resistance to wicking and lateral leakage
BS ISO 3723:1976 Hydraulic fluid power - Filter elements - Method for end load test
BS ISO 3723:1996 Hydraulic fluid power. Filter elements. Method for end load test
BS ISO 3723:2015 Hydraulic fluid power. Filter elements. Method for end load test
BS ISO 17190-6:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Test method for determination of the fluid retention capacity in saline solution by gravimetric measurement following centrifugation
BS 7250:1989 Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors
19/30394375 DC BS ISO 17190-7. Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Part 7. Test method for gravimetric determination of absorption against pressure
BS ISO 10770-2:2012 Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for three-port directional flow-control valves
BS 7709-4:1993 Analysis of extract solutions of glass. Method for determination of aluminium oxide by molecular absorption spectrometry
BS ISO 18375:2016 Heavy commercial vehicles and buses. Test method for yaw stability. Sine with dwell test
BS 4258-11:1982 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use - Determination of lead content (atomic absorption spectrometric method)
BS 7709-1:1993 Analysis of extract solutions of glass. Method for determination of silicon dioxide by molecular absorption spectrometry
BS 7709-6:1993 Analysis of extract solutions of glass. Method for determination of boron (III) oxide by molecular absorption spectrometry
BS EN 16651:2015 Fertilizers. Determination of N-(n-Butyl)thiophosphoric acid triamide (NBPT) and N-(n-Propyl)thiophosphoric acid triamide (NPPT). Method using high-performance liquid chromatography (HPLC)
BS EN ISO 2812-3:2012 Paints and varnishes. Determination of resistance to liquids. Method using an absorbent medium
BS ISO 17190-8:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Test method for determination of the permeability dependent absorption under pressure of saline solution by gravimetric measurement
19/30394380 DC BS ISO 17190-8. Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Part 8. Test method for determination of the permeability dependent absorption under pressure of saline solution by gravimetric measurement
BS ISO 14512:2000 Passenger cars - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method
19/30394372 DC BS ISO 17190-6. Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Part 6. Test method for determination of the fluid retention capacity in saline solution by gravimetric measurement following centrifugation
BS ISO 17190-10:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for determination of extractable polymer content by potentiometric titration
BS ISO 17190-9:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for gravimetric determination of flow rate and bulk density
BS ISO 17190-4:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for estimation of the moisture content as weight loss upon heating
BS 7709-3:1993 Analysis of extract solutions of glass. Method for determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry
19/30394357 DC BS ISO 17190-1. Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Part 1. Test method for determination of pH
BS ISO 17190-3:2020 Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders - Test method for determination of the particle size distribution by sieve fractionation
BS EN ISO 2812-3:2019 Tracked Changes. Paints and varnishes. Determination of resistance to liquids. Method using an absorbent medium
BS EN 13286-53:2005 Unbound and hydraulically bound mixtures - Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression
BS EN 13286-53:2004 Unbound and hydraulically bound mixtures - Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression
BS 6912-3:1990 Safety of earth-moving machinery - Sound test method for machine-mounted forward and reverse warning alarm
BS 2782-2 Method 241A:1984 Methods of testing plastics - Electrical properties - Determination of effect of polyvinyl chloride compound on the loss tangent of polyethylene
BS 5438:1989 Methods of test for flammability of textile fabrics when subjected to a small igniting flame applied to the face or bottom edge of vertically oriented specimens
BS ISO 5682-2:2017 Equipment for crop protection. Spraying equipment. Test methods to assess the horizontal transverse distribution for hydraulic sprayers
BS ISO 16234:2007 Heavy commercial vehicles and buses - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method
19/30394363 DC BS ISO 17190-3. Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders. Part 3. Test method for determination of the particle size distribution by sieve fractionation
BS EN 13131:2000*BS 2000-465:2001 Methods of test for petroleum and its products - Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method
BS EN 241:2000 Methods of test for petroleum and its products - Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method
BS EN 13131:2000 Methods of test for petroleum and its products. Liquid petroleum products. Determination of nickel and vanadium content. Atomic absorption spectrometric method

Society of Automotive Engineers (SAE), Forward aspiration

SAE J748-1957 Hydraulic Directional Control Valves, 3000 psi Maximum, Recommended Practice
SAE J/ISO 9533-2003 Earth-moving machinery Machine-mounted forward and reverse audible warning alarm Sound test method Identical to ISO 9533:1989; Superseding SAE J1446
SAE AS5869B-2008 Fitting Assembly, Union, 3 Hole Flange, Axially Swaged, Hydraulic, 5080 PSI
SAE AS5869A-2006 Fitting Assembly, Union, 3 Hole Flange, Axially Swaged, Hydraulic, 5080 PSI
SAE AS5869C-2012 Fitting Assembly, Union, 3 Hole Flange, Axially Swaged, Hydraulic, 5080 PSI
SAE AS95234/2-2019 CONNECTOR, RECEPTACLE, SQUARE FLANGE, REVERSE BAYONET COUPLING, BOX MOUNT, FRONT, NO ACCESSORY THREAD
SAE AS5869F-2019 FITTING ASSEMBLY, UNION, 3 HOLE FLANGE AXIALLY SWAGED, HYDRAULIC 5080 PSI
SAE AS5869G-2020 FITTING ASSEMBLY, UNION, 3 HOLE FLANGE AXIALLY SWAGED, HYDRAULIC 5080 PSI
SAE AS95234/4-2019 CONNECTOR, RECEPTACLE, REVERSE BAYONET COUPLING, SQUARE FLANGE, PANEL MOUNT, FRONT, WITH ACCESSORY THREAD
SAE AS6117-2011 Fitting, Assembly, Union, Axially Swaged, Hydraulic, Up to 1500 PSI

International Organization for Standardization (ISO), Forward aspiration

ISO 17190-5:2001 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 5: Gravimetric determination of free swell capacity in saline solution
ISO 17190-1:2001 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 1: Determination of pH
ISO/DIS 10534-2 Acoustics — Determination of acoustic properties in impedance tubes — Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance
ISO/FDIS 10534-2:2023 Acoustics — Determination of acoustic properties in impedance tubes — Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance
ISO 10534-2:2011 Acoustics — Determination of acoustic properties in impedance tubes — Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance
ISO 10534-2:2023 Acoustics — Determination of acoustic properties in impedance tubes — Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance
ISO 17190-3:2001 Urine absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 3: Determination of particle size distribution by sieve fractionation
ISO 17190-6:2001 Urine-absorping aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation
ISO 17190-4:2001 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 4: Determination of moisture content by mass loss upon heating
ISO 3837:1993 Liquid petroleum products; determination of hydrocarbon types; fluorescent indicator adsorption method
ISO 13317-2:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - Part 2: Fixed pipette method
ISO 18375:2016 Heavy commercial vehicles and buses - Test method for yaw stability - Sine with dwell test
ISO 19699-1:2017 Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 1: Test methods
ISO 16900-1:2014 Respiratory protective devices - Methods of test and test equipment - Part 1: Determination of inward leakage
ISO 16900-1:2019 Respiratory protective devices — Methods of test and test equipment — Part 1: Determination of inward leakage
ISO 6783:1982 Coarse aggregates for concrete; Determination of particle density and water absorption; Hydrostatic balance method
ISO 2812-3:2007 Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
ISO 3837:1993/Amd 1:2021 Liquid petroleum products - Determination of hydrocarbon types - Fluorescent indicator adsorption method; Amendment 1
ISO 12917-1:2002 Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 1: Manuel methods
ISO 12917-1:2017 Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 1: Manual methods
ISO 3675:1998/AWI Amd 1 Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method — Amendment 1
ISO 2812-3:2019 Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium
ISO 2812-3:2012 Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
ISO 10136-5:1993 Glas and glassware; analysis of extract solutions; part 5: determination of iron(III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry
ISO/R 617:1967 Calculation of rectangular symmetrical fillet welds statically loaded in such a way that the transverse section is not under any normal stress
ISO 3837:1993/Cor 1:1994 Liquid petroleum products - Determination of hydrocarbon types - Fluorescent indicator adsorption method; Technical Corrigendum 1
ISO 3837:1993/Cor 2:1996 Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method — Technical Corrigendum 2
ISO 9233:1991 Cheese and cheese rind; determination of natamycin content; method by molecular absorption spectrometry and by high-performance liquid chromatography
ISO 17190-8:2020 Urine-absorbing aids for incontinence — Polyacrylate superabsorbent powders — Part 8: Test method for determination of the permeability dependent absorption under pressure of saline solution by gravim
ISO 16234:2006 Heavy commercial vehicles and buses - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method

国家市场监督管理总局、中国国家标准化管理委员会, Forward aspiration

GB/T 39748.7-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure
GB/T 14041.4-2019 Hydraulic fluid power—Filter elements—Part 4: Method for rated end load test
GB/T 39748.6-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 6:Gravimetric determination of fluid retention capacity in saline solution after centrifugation
GB/T 39748.11-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 11:Determination of content of respirable particles
GB/T 39748.9-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 9:Gravimetric determination of density
GB/T 39748.8-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate
GB/T 39748.10-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 10:Determination of extractable polymer content by potentiometric titration
GB/T 5170.15-2018 Inspection methods for environmental testing equipments—Part 15：Hydraulic vibrating type system for vibration(sinusoidal) test

Professional Standard - Petrochemical Industry, Forward aspiration

SH/T 0066-2002 Determination of Foaming Tendency of Engine Coolant (Glassware Method)
SH/T 0412-1992 Determination of n-paraffin content in liquid paraffin and its raw oil (chromatographic method)
SH/T 0102-1992 Determination of copper content in lubricating oils and liquid fuels (atomic absorption spectrometry)

Professional Standard - Non-ferrous Metal, Forward aspiration

YS/T 227.11-1994 Determination of silicon content in tellurium (n-butanol extraction silicon molybdenum blue absorptiometry)
YS/T 536.5-2006 Bismuth Chemical Analysis Method Solid-liquid Extraction Separation-Flame Atomic Absorption Spectrometry Determination of Zinc
YS/T 536.5-2009 Methods for chemical analysis of bismuth.Determination of zinc content.solid-liquid extraction-flame atomic absorption spectrophotometric method
YS/T 227.6-2010 Methods for chemical analysis of tellurium-Part 6: Determination of copper content-Solid-liquid separate-flame atomic absorption spectrophotometry

YU-JUS, Forward aspiration

JUS B.H8.063-1991 Liquid petroleum,products - Determination of hydrocarbon types - Fluorescent indicator adsorption
JUS H.G8.132-1984 Reagents. Ammonia solution. Determination of zine content. Flame atomic absorption method
JUS H.G8.476-1991 Reagents. Orthophosphoric acid. Determination of lead, copper, nickel, iron, manqanese, cadmium and zine contents. Flame atomic absorption method
JUS H.G8.133-1984 Reagents. Ammonia solution. Determination of calcium and magnesium contents. Flame atomic absor- ption method
JUS H.G8.131-1984 Reagents. Ammonia solution. Determination ofiron, lead andcopper contents. Flame atomic absorption method
JUS H.F8.309-1991 Natural gas. Determination of hydrocarbons from butane (C.) to bexadecane (C1A). Gas cbromatograpbic metbod

VN-TCVN, Forward aspiration

TCVN 5193-1990 Fluid power drive.Positive displacement pumps.Acceptance rules and methods testing
TCVN 7330-2011 Standard.Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
TCVN 7207-5-2002 Glass and glassware.Analysis of extract solutions.Part 5: Determination of iron (Ⅲ) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry

ESDU - Engineering Sciences Data Unit, Forward aspiration

ESDU 02009-2011 Sound radiation from orthotropic rectangular plates Part I: Estimation by asymptotic method
ESDU 02009-2002 Sound radiation from orthotropic rectangular plates. Part I: estimation by asymptotic method.
ESDU 07005-2007 Normal force and pitching moment of non-axisymmetric bodies: square cross-sections with corner rounding.
ESDU 93011-1994 Flat rectangular orthotropic plates under uniformly distributed normal pressure. Elastic stresses and deflections for various forms of edge restraint.
TM 71-1990 A Rayleigh-Ritz method of analysis for vibration of orthotropic plates under static in-plane loading (including shear)
ESDU 04007 A-2005 Normal force and pitching moment of non-axisymmetrical bodies: square and triangular cross-sections without corner rounding.

Professional Standard - Automobile, Forward aspiration

QC/T 299.2-2014 Automobile hydraulic steering power pump.Part 2: Test method
QC/T 529-2013 Motor vehicles.Hydraulic power steering gear.Technique requirements and test methods
QC/T 972-2014 Technical requirements and test method for motor vehicle-electronically controlled hydraulic power steering gear
QC/T 1012-2015 Technical requirements and determination for motor vehicles.hydraulic power steering system cleanliness
QC/T 305-2013 Motor vehicles.Hydraulic power steering control valve.Performance requirements and test methods

SAE - SAE International, Forward aspiration

SAE AS5869E-2017 FITTING ASSEMBLY@ UNION@ 3 HOLE FLANGE AXIALLY SWAGED@ HYDRAULIC 5080 PSI
SAE AS5869D-2014 Fitting Assembly, Union, 3 Hole Flange, Axially Swaged, Hydraulic, 5080 PSI
SAE AS95234/2-2014 CONNECTOR@ RECEPTACLE@ SQUARE FLANGE@ REVERSE BAYONET COUPLING@ BOX MOUNT@ FRONT@ NO ACCESSORY THREAD

国家质量监督检验检疫总局, Forward aspiration

SN/T 4429.2-2016 Determination of total mercury content in crude oil by Zeeman-corrected cold atomic absorption spectrometry

Professional Standard - Agriculture, Forward aspiration

GB/T 461.1-1989 Determination of capillary suction height of paper and board (Kreem method)
660药典第一增补本-2010 Three revised appendices Appendix VI C Determination of sialic acid (resorcinol chromogenic method)
NY/T 4193-2022 Experimental guidelines for estimating soil adsorption coefficients of chemical pesticides by high performance liquid chromatography

Professional Standard - Public Safety Standards, Forward aspiration

GA/T 1073-2013 HS-GC examination methods for ethanol, methanol, n-propanol, aldehyde, acetone, isopropanol and n-butanol in blood and urine
GA/T 1586-2019 Forensic science for alleged drug addicts urine collection practices
GA/T 1329-2016 GC and GC-MS examination methods for ketamine in urine of drug user in forensic science
GA/T 1330-2016 Gas chromatography-mass spectrometry method for the detection of tetrahydrocannabinol and tetrahydrocannabinoid in the urine of drug addicts in forensic science

Professional Standard - Aviation, Forward aspiration

HB/Z 5099.8-2000 Analytical method of silver electroplating solution Determination of antimony content in hard silver plating solution by atomic absorption spectrometry
HB/Z 5099.7-2000 Analysis method for silver plating solution Determination of iron, copper contents in silver plating solution through atomic absorption spectrometry
HB/Z 5088.6-1999 Analytical method of electroplating nickel solution Determination of copper content by atomic absorption spectrometry
HB/Z 5091.5-1999 Analysis method for chrome plating solution Determination of ferrous content through atomic absorption spectrometry
HB/Z 5091.6-1999 Analysis method for chrome plating solution Determination of copper content through atomic absorption spectrometry
HB/Z 5088.5-1999 Analysis method for nickel plating solution Determination of ferrous content through atomic absorption spectrometry
HB 5220.8-1995 Chemical Analysis Methods of Superalloys-N-Butanol-Chloroform Extraction-Absorptiometry for Determination of Phosphorus Content
HB/Z 5086.7-2000 Analytical method of copper cyanide electroplating solution Determination of lead content by atomic absorption spectrometry
HB/Z 5086.8-2000 Analytical method of copper cyanide electroplating solution Determination of silver content by atomic absorption spectrometry
HB/Z 5093.6-2000 Analytical method of alkaline electroplating tin solution Determination of lead content by atomic absorption spectrometry
HB/Z 5093.7-2000 Analytical method of alkaline electroplating tin solution Determination of copper content by atomic absorption spectrometry
HB/Z 5084.5-2000 Analytical method of cyanide electroplating zinc solution - Determination of iron content by atomic absorption spectrometry
HB/Z 5084.6-2000 Analytical method of cyanide electroplating zinc solution - Determination of copper content by atomic absorption spectrometry
HB/Z 5085.8-1999 Analytical method of cadmium electroplating solution in cyanide plating Determination of copper content by atomic absorption spectrometry
HB/Z 5085.7-1999 Analytical method of cadmium electroplating solution in cyanide electroplating Atomic absorption spectrometry Determination of iron content
HB/Z 5086.9-2000 Analytical method of copper cyanide electroplating solution Determination of zinc and cadmium content by atomic absorption spectrometry
HB 5220.8-2008 Methods for chemical analysis of superalloys.Part 8: Determination of phosphorus content by n-butyl alcohol-chloroform extraction photometric method
HB/Z 5087.4-2004 Methods for analysis of acid plating copper solutions part 4:Determination of iron content by atomic absorption spectrometric method
HB/Z 5094.3-2004 Methods for analysis of acid plating tin solutions-Part 3:Determination of lead content by atomic absorption spectrometric method
HB/Z 5094.4-2004 Methods for analysis of acid plating tin solutions-Part 4:Determination of copper content by atomic absorption spectrometric method
HB/Z 5087.7-2004 Methods for analysis of acid plating copper solutions part 7:Determination of antimony content by atomic absorption spectrmetric method
HB/Z 5087.5-2004 Methods for analysis of acid plating copper solutions part 5:Determination of nickel sulfate content by atomic absorption spectrometric method

Professional Standard - Energy, Forward aspiration

NB/SH/T 0933-2016 Determination of Normal Low Carbonic Acid Content in Fischer-Tropsch Synthetic Oil by Liquid-Liquid Extraction-Ion Chromatography
NB/T 10427-2020 Test correction of dynamic liquid level in coalbed methane well and calculation method of bottom hole pressure
NB/SH/T 0895-2015 Determination of filter blocking tendency of middle distillate fuels and liquid fuels
NB/SH/T 0889-2014 Liquid paraffin wax and its raw oil.Determination of normal paraffin hydrocarbons content and carbon number distribution.Gas chromatography

国家能源局, Forward aspiration

SH/T 0933-2016 Determination of ortho-low carbonic acid content in Fischer-Tropsch synthetic oil by liquid-liquid extraction-ion chromatography

Japanese Industrial Standards Committee (JISC), Forward aspiration

JIS B 9935:2001 Hydraulic fluid power -- On-line automatic particle-counting systems for liquids -- Methods of calibration and validation
JIS B 8657:2002 Test methods for electro-hydraulic proportional directional bypass flow control valves
JIS B 8655:1989 Test methods for electro-hydraulic proportional directional series flow control valves
JIS B 8657:1989 Test methods for electro-hydraulic proportional directional bypass flow control valves
JIS B 8655:2002 Test methods for electro-hydraulic proportional directional series flow control valves
JIS A 1134 AMD 1:2022 Methods of test for particle density and water absorption of lightweight fine aggregates for structural concrete (Amendment 1)
JIS Z 8820-2:2004 Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 2: Fixed pipette method
JIS K 2536-1:2003 Liquid petroleum products -- Testing method of components Part 1: Fluorescent indicator adsorption method
JIS B 8659-2:2002 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves
JIS K 7080-2:2012 Carbon fiber reinforced plastics -- Testing methods for bearing strength -- Part 2: Orthotropic and Quasi-isotropic long fiber laminates
JIS B 8659-2:2017 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-port directional flow-control valves

American Society of Mechanical Engineers (ASME), Forward aspiration

ASME MFC-9M Errata-1989 Measurement of liquid flow in closed conduits by weighing method; Errata

Professional Standard - Commodity Inspection, Forward aspiration

SN/T 1176-2003 Methods for the inspection of super-twisted nematic liquid crystal display devices for import and export
SN/T 1032-2002 Method for the determination of ultra-violet absorbents in cosmetics for import and export.Liquid chromatography
SN/T 1032-2018 Determination of UV absorbers in cosmetics for import and export by liquid chromatography

Hebei Provincial Standard of the People's Republic of China, Forward aspiration

DB13/T 5223-2020 Method for Determination of Voltage Holding Rate of Nematic Thermotropic Liquid Crystal Monomer
DB13/T 5222-2020 Determination of Purity of Nematic Thermotropic Liquid Crystal Monomer by Gas Chromatography
DB13/T 5096-2019 Test method for clearing point of nematic thermotropic liquid crystal for monochrome display
DB13/T 2893-2018 Determination of cimaterol in animal urine by enzyme-linked immunosorbent assay
DB13/T 5537-2022 Determination of Resistivity of Nematic Thermotropic Liquid Crystal Monomer by DC Voltage Method
DB13/T 2894-2018 Determination of phenylethanolamine A in animal urine by enzyme-linked immunosorbent assay

American National Standards Institute （ANSI), Forward aspiration

ANSI/ASHRAE 78-1985 Method of Testing Flow Capacity of Suction Line Filters and Filter-Driers
ANSI/ASHRAE 219-2021 Method of Testing the Ability of Liquid Line Filter Driers or Adsorbents to Remove Organic Acid
BS 5173-102.10:1990 Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Hydrostatic tests for oil suction and discharge hose

Xinjiang Provincial Standard of the People's Republic of China, Forward aspiration

DB65/T 3554-2013 Determination of albuterol in animal urine by enzyme-linked immunosorbent assay

Professional Standard - Nuclear Industry, Forward aspiration

EJ/T 20225-2018 Determination of Uranium in Feed Liquid of Reprocessing Process L Absorption Edge Spectrometry

ZA-SANS, Forward aspiration

SANS 16063-31:2009 Methods for the calibration of vibration and shock transducers Part 31: Testing of transverse vibration sensitivity
SANS 5115:2005 Fluidity of cotton and certain cellulosic man-made fibres in cuprammonium solution (modified method)

Professional Standard - Medicine, Forward aspiration

YY/T 0471.1-2004 Test methods for primary wound dressing-Part 1:Aspects of absorbency

Professional Standard - Tobacco, Forward aspiration

YC/T 293-2009 Determination of mercury in tobacco flavourings and castings.Cold atomic absorption spectrometry
YC/T 408-2011 Determination of nordihydroguaiaretic acid in tobacco additives.High performance liquid chromatographic method
YC/T 294-2009 Determination of arsenic,lead,cadmium,chromium and nickel in tobacco flavourings and castings.Graphite furnace atomic absorption spectrometry

Anhui Provincial Standard of the People's Republic of China, Forward aspiration

DB34/T 827-2008 Determination of Ractopamine Residues in Urine-Enzyme-Linked Immunosorbent Assay
DB34/T 2553-2015 Technical requirements and test methods for hydraulically driven variable valve timing (VVT) systems of automobile engines

工业和信息化部, Forward aspiration

HG/T 5582-2019 Test method for activity of catalysts for producing isobutylene from normal olefins in liquefied gas
HG/T 5420-2018 Analysis method of chemical components of n-olefin to isobutylene catalyst in liquefied gas
QC/T 1049-2016 Matching technical requirements and test methods for automobile rack-and-pinion hydraulic power steering systems

Professional Standard - Railway, Forward aspiration

TB/T 2720.2-2007 Angle-axial type and constant displacement piston hydro-static pump/motor for diesel locomotive-Part 2:The test methods

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Forward aspiration

GB/T 15623.1-2018 Hydraulic fluid power—Electrically modulated hydraulic control valves—Part 1: Test methods for four-port directional flow-control valves
GB/T 15623.2-2017 Hydraulic fluid power—Electrically modulated hydraulic control valves—Part 2: Test methods for three-port directional flow-control valves

CEN - European Committee for Standardization, Forward aspiration

EN ISO 2812-3:2007 Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
EN ISO 2812-3:2019 Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
EN 1911-3:1998 Stationary Source Emissions - Manual Method of Determination of HCI - Part 3: Absorption Solutions Analysis and Calculation

GOSTR, Forward aspiration

GOST 31872-2019 Liquid petroleum products. Determination of hydrocarbon-type composition by fluorescent indicator adsorption method
GOST R ISO 17190-11-2019 Urine-absorbing aids at urine incontinence. Test methods for characterizing polymer-based absorbent materials. Part 11. Determination of suspended solids

KR-KS, Forward aspiration

KS P ISO 17190-3-2021 Urine-absorbing aids for incontinence -- Polyacrylate superabsorbent powders –Part 3: Test method for determination of the particle size distribution by sieve fractionation
KS P ISO 17190-8-2021 Urine-absorbing aids for incontinence - Polyacrylate superabsorbent powders - Part 8:Test method for determination of the permeability dependent absorption under pressure of saline solution by gravime
KS P ISO 17190-6-2021 Urine-absorbing aids for incontinence – Polyacrylate superabsorbent powders –Part 6: Test method for determination of the fluid retention capacity in saline solution by gravimetric measurement followi
KS H ISO 9233-2021 Cheese and cheese rind — Determination of natamycin content —Method by molecular absorption spectrometry and by high-performance liquid chromatography

TH-TISI, Forward aspiration

TIS 1743-1999 Coarse aggregates for concrete.determination of particle density and water absorption.hydrostatic balance method

Agricultural Standard of the People's Republic of China, Forward aspiration

农业部1025号公告-5-2008 Determination of avermectins residue in animal derived food ELISA method, HPLC method and Lc-MS-MS method

Shanghai Provincial Standard of the People's Republic of China, Forward aspiration

DB31/T 337-2005 Determination of salbutamol in swine urine (ELISA & LC-MS)
DB31/T 336-2005 Determination of ractopamine in swine urine (ELISA & LC-MS)
DB31/T 823-2014 Determination of Cyproheptadine Residues in Pig Urine by ELISA and Liquid Chromatography-Tandem Mass Spectrometry

ES-AENOR, Forward aspiration

UNE 81-591-1991 Biological control. Determination of lead in blood. Extraction method. Atomic absorption spectrometry
UNE 81-590-1992 Biological control. Determination of lead in blood. Graphite furmace method. Atomic absorption spectrometry
UNE-EN 2155-2:1994 Aerospace series. Test methods for transparent materials for aircraft glazing. Part 2: Determination of water absorption

SE-SIS, Forward aspiration

SIS SS 13 21 25-1983 Concrete testing - Aggregate - Particle density (hydrostatic balance method) and water absorption

TR-TSE, Forward aspiration

TS 2744-1977 Clays Used For Ceramicware Particle-Size Analysis By Hydrometer find Pipet Methods

中华人民共和国国家卫生和计划生育委员会, Forward aspiration

GB 12373-1990 Standard sampling device for liquid absorption method of gaseous pollutants in the atmosphere of residential areas

Professional Standard - Light Industry, Forward aspiration

QB/T 2333-1997 Quantitative Determination of Ultraviolet Absorbers in Sunscreen Cosmetics by High Performance Liquid Chromatography

Hunan Provincial Standard of the People's Republic of China, Forward aspiration

DB43/T 2704-2023 Determination of mycotoxin adsorption rate of feed remover by liquid chromatography-tandem mass spectrometry

Professional Standard - Hygiene , Forward aspiration

WS/T 170-1999 Workplace air.Determination of aniline.Solvent desorption high performance liquid chromatographic method

海关总署, Forward aspiration

SN/T 5258-2020 Determination of UV-320 and UV-328 ultraviolet absorbers in paints by high performance liquid chromatography

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Forward aspiration

ASHRAE 219-2021 Method of Testing the Ability of Liquid Line Filter Driers or Adsorbents to Remove Organic Acid

Institute of Electrical and Electronics Engineers (IEEE), Forward aspiration

SMPTE RP 39:1993 RP 39:1993 - SMPTE Recommended Practice - Specifications for Maintaining an Emulsion-In Orientation on Theatrical Release Prints

Yunnan Provincial Standard of the People's Republic of China, Forward aspiration

DB53/T 375-2012 Determination of lead content in the leachate of rubber blood transfusion hose-Graphite furnace atomic absorption spectrometry

未注明发布机构, Forward aspiration

BS EN 6059-305:2019 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods Part 305 : Fluid absorption

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Forward aspiration

JEDEC JESD531-1986 Thermal Resistance Test Method for Signal and Regulator Diodes (Forward Voltage, Switching Method) Reaffirmation of ANSI/EIA-531-1986, Previously Published as IS-13; Replaces JEDEC JEP 90

NL-NEN, Forward aspiration

NEN 2931-1993 Air quality. Workplace atmosphere. Determination of the concentration of vinylchloride by active sorbent tube sampling, liquid desorption and gas chromatography

Standard Association of Australia （SAA）, Forward aspiration

AS 4205.2:1994 Analysis of urine for trace elements - Determination of copper, cadmium and lead - Flame atomic absorption spectrometric method