ZH
RU
ES

Atomic Fluorescence and UV Spectroscopy

Atomic Fluorescence and UV Spectroscopy, Total:500 items.

In the international standard classification, Atomic Fluorescence and UV Spectroscopy involves: Petroleum products in general, Vocabularies, Analytical chemistry, Education, Plastics, Paints and varnishes, Radiation measurements, Body care equipment, Lamps and related equipment, Road vehicles in general, Water quality, Surface treatment and coating, Inks. Printing inks, Natural gas, Inorganic chemicals, Non-ferrous metals, Fuels, Organic chemicals, Geology. Meteorology. Hydrology, Fertilizers, Testing of metals, Air quality, Electronic components in general, Farming and forestry, Products of the textile industry, Sugar. Sugar products. Starch, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Products of non-ferrous metals, Optics and optical measurements, Metalliferous minerals, Corrosion of metals, Paint coating processes, Optoelectronics. Laser equipment, Wastes, Ferroalloys, Non-destructive testing, Non-metalliferous minerals, Refractories, Test conditions and procedures in general, Biology. Botany. Zoology, Ceramics, Ferrous metals, Products of the chemical industry, Fruits. Vegetables, Burners. Boilers, Medical equipment, Laboratory medicine, Environmental protection, General methods of tests and analysis for food products, Lubricants, industrial oils and related products, Soil quality. Pedology, Waxes, bituminous materials and other petroleum products, Electrical engineering in general, Road vehicle systems, Construction materials, Road engineering, Optical equipment, Pulps, Tobacco, tobacco products and related equipment.


Japanese Industrial Standards Committee (JISC), Atomic Fluorescence and UV Spectroscopy

  • JIS K 2541-6:2003 Crude oil and petroleum products -- Determination of sulfur content Part 6: Ultraviolet fluorescence method
  • JIS K 2541-6:2013 Crude petroleum and petroleum products.Determination of sulfur content Part 6: Ultraviolet fluorescence method
  • JIS K 7350-3:1996 Plastics -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps
  • JIS K 7350-3:2008 Plastics -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps
  • JIS K 2180-5:2013 Dimethylether (DME) for fuels -- Part 5: Determination of total sulfur -- Ultraviolet fluorescence method

German Institute for Standardization, Atomic Fluorescence and UV Spectroscopy

  • DIN 51401:2016 Atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS) - Vocabulary
  • DIN 51401 Beiblatt 1:2017-07 Atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS) - Vocabulary; Supplement 1: Explanations
  • DIN 51401:2016-11 Atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS) - Vocabulary
  • DIN EN ISO 4892-3:2016-10 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016); German version EN ISO 4892-3:2016
  • DIN EN 61228:2008 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method (IEC 61228:2008); German version EN 61228:2008
  • DIN EN ISO 16474-3:2021-04 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021); German version EN ISO 16474-3:2021
  • DIN 51401 Bb.1:2017 Atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS) - Vocabulary; Supplement 1: Explanations
  • DIN EN IEC 61228:2021-05 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method (IEC 61228:2020); German version EN IEC 61228:2020 / Note: DIN EN 61228 (2008-08) remains valid alongside this standard until 2023-12-09.
  • DIN EN IEC 61228:2020 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method (34A/2160A/CDV); German and English version prEN IEC 61228:2019
  • DIN EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006); English version of DIN EN ISO 17852:2008-04
  • DIN 51009:2013-11 Optical atomic spectral analysis - Principles and definitions
  • DIN EN ISO 11507:2007 Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007); English version of DIN EN ISO 11507:2007-05
  • DIN EN 13523-10:2023-08 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German and English version prEN 13523-10:2023 / Note: Date of issue 2023-07-14*Intended as replacement for DIN EN 13523-10 (2017-05).
  • DIN EN 13523-10:2017-05 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German version EN 13523-10:2017
  • DIN EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German version EN 13523-10:2017
  • DIN EN 13523-10:2010 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German version EN 13523-10:2010
  • DIN EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000
  • DIN EN 15486:2007 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method; English version of DIN EN 15486:2007-11
  • DIN 51009:2013 Optical atomic spectral analysis - Principles and definitions
  • DIN 51009:2001 Optical atomic spectral analysis - Principles and definitions
  • DIN EN 15486:2007-11 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method; German version EN 15486:2007
  • DIN EN ISO 11151-1:2015-12 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
  • DIN 51418-1:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
  • DIN EN IEC 61228:2021 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method (IEC 61228:2020); German version EN IEC 61228:2020
  • DIN EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
  • DIN EN ISO 16474-3:2014 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013); German version EN ISO 16474-3:2013
  • DIN EN ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021); German version EN ISO 16474-3:2021
  • DIN EN 16175-2:2016-12 Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS); German version EN 16175-2:2016
  • DIN EN ISO 21587-3:2007-12 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007); German version EN ISO 21587-3:2007
  • DIN EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
  • DIN EN 927-6:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water; English version of DIN EN 927-6:2006-10
  • DIN EN 927-6:2018-12 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water; German version EN 927-6:2018
  • DIN EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007); English version of DIN EN ISO 21587-3:2007-12
  • DIN CEN/TS 17784-1:2022-07 Organo-mineral fertilizers - Identification of complexing agents - Part 1: Method using UV-Vis spectrophotometry and gravimetry; German version CEN/TS 17784-1:2022
  • DIN 51418-1:2008-08 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles

Professional Standard - Education, Atomic Fluorescence and UV Spectroscopy

  • JY/T 0566-2020 General rules for atomic fluorescence spectrometry
  • JY/T 0570-2020 General rules for ultraviolet and visible absorption spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Atomic Fluorescence and UV Spectroscopy

  • GB/T 4470-1998 Analytical spectroscopic methods-Flame emission,atomic absorption and atomic fluorescence-Vocabulary
  • GB/T 21096-2013 Fluorescent ultraviolet lamps used for tanning.Measurement and specification method
  • GB/T 9721-1988 Chemical reagent--General rules for the molecular absorption spectrophotometry(ultraviolet and visible)
  • GB/T 9721-2006 chemical reagent General rules for the molecular absorption spectrophotometry (ultraviolet and visible)
  • GB 9721-1988 Molecular Absorption Spectrophotometry of Chemical Reagents General Rules (Ultraviolet and Visible Parts)
  • GB/T 16422.3-1997 Plastics--Methods of exposure to laboratory light sources--Part 3: Fluorescent UV lamps
  • GB/T 16422.3-2014 Plastics.Methods of exposure to laboratory light sources.Part 3 :Fluorescent UV lamps
  • GB/T 17001.1-2011 Anti-counterfeiting printing ink.Part 1:Ultraviolet fluorescent anti-counterfeiting printing ink
  • GB/T 16781.2-1997 Natural gas--Determination of mercury--Cold atomic fluorescent spectrophotometry
  • GB/T 12689.9-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of antimony content-The atomic fluorescence spectrometer and the flame atomic absorption spectrometric method
  • GB/T 17593.4-2006 Textiles. Determination of heavy metals. Part 4: Arsenic and mercury. Atomic fluorescence spectrophotometry
  • GB/T 8151.15-2005 Methods for chemical analysis of zinc concentrates-Determination of mercury content-Atomic fluorescence spectrometry method
  • GB/T 8152.11-2006 Methods for chemical analysis of lead concentrates. Determination of mercury content. Atomic fluorescence spectrometer method
  • GB/T 8152.5-2006 Methods for chemical analysis of lead concentrates. Determination of arsenic content. Atomic fluorescence spectrometer method
  • GB/T 6150.13-2022 Methods for chemical analysis of tungsten concentrates—Part 13：Determination of arsenic content—Atomic fluorescence spectrometry and the silver diethyldithiocarbamate（DDTC-Ag）spectrophotometry
  • GB/T 4325.3-2013 Methods for chemical analysis of molybdenum.Part 3:Determination of bismuth content.Atomic fluorescence spectrometry
  • GB/T 4325.4-2013 Methods for chemical analysis of molybdenum.Part 4:Determination of tin content.Atomic fluorescence spectrometry
  • GB/T 4325.5-2013 Methods for chemical analysis of molybdenum.Part 5:Determination of antimony content.Atomic fluorescence spectrometry
  • GB/T 4325.6-2013 Methods for chemical analysis of molybdenum.Part 6:Determination of arsenic content.Atomic fluorescence spectrometry
  • GB/T 6150.15-2023 Methods for chemical analysis of tungsten concentrates - Part 15: Determination of bismuth content by hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
  • GB/T 6150.10-2023 Methods of chemical analysis of tungsten concentrates - Part 10: Determination of lead content by hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
  • GB/T 11060.8-2012 Natural gas.Determination of sulfur compound.Part 8:Determination of total sulfur content by ultraviolet fluorescence method
  • GB/T 11066.9-2009 Methods for chemical analysis of gold.Determination for arsenic and tin contents.Hydride generation-atomic fluorescence spectrometry
  • GB/T 12689.2-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of arsenic content-The atomic fluorescence spectrometer method
  • GB/T 7731.7-2008 Ferrotungsten. Determination of tin content. Phenylfluorone photometric method and inductively coupled plasma-atomic emission spectrometry
  • GB/T 17121-1997 Anti-counterfeiting stamp-ink. Part 1: Technical requirements of UV-excitation flourescent anti-counterfeiting stamp-ink
  • GB/T 14849.10-2016 Methods for chemical analysis of industrial silicon - Part 10: Determination of mercury content by atomic fluorescence spectrometry
  • GB/T 6150.17-2022 Methods for chemical analysis of tungsten concentrates—Part 17：Determination of antimony content—Atomic fluorescence spectrometry
  • GB/T 8151.13-2012 Methods for chemical analysis of zinc concentrates.Part 13:Determination of germanium content.Hydride generation-atomic fluorescence spectrometry and the phenyl fluorone spectrophptometric method
  • GB/T 23987-2009 Paints and varnishes.Exposure of coatings to artificial weathering.Exposure to fluorescent UV lamps and water
  • GB/T 3253.6-2008 Methods for chemical analysis of antimony and antimony trioxide.Determination of selenium content.Atomic fluorenscence spectrophotometric method
  • GB/T 3253.10-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of mercury content.Atomic fluorescence spectrometric method
  • GB/T 3253.7-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of bismuth content.Atomic fluorescence spectrometric method
  • GB/T 20899.12-2016 Methods for chemical analysis of gold ores.Part 12:Determination of arsenic, mercury, cadmium, lead and bismuth contents.Atomic fluorescence spectrometric method
  • GB/T 7739.12-2016 Methods for chemical analysis of gold concerntrates.Part 12:Determination of arsenic, mercury, cadmium, lead and bismuth contents.Atomic fluorescence spectrometric method
  • GB/T 223.80-2007 Iron,steel and alloy-Determination of trace bismuth and arsenic contents- Hydride generation-atomic fluorescence spectrometric method
  • GB/T 23364.1-2009 Methods for chemical analysis of high purity indium oxide.Part 1:Determination of arsenic content.Atomic fluorescence spectrometry
  • GB/T 23364.3-2009 Methods for chemical analysis of high purity indium oxide.Part 3:Determination of antimony content.Atomic fluorescenece spectrometry
  • GB/T 12153-1989 Analysis of water used in boiler and cooling system--Determination for mineral oil--Ultraviolet spectrophotometry
  • GB/T 17001.1-1997 Anti-counterfeiting ink. Part 1:Technical requirement of ultraviolet fluorecent ink
  • GB/T 11417.9-2012 Ophthalmic optics.Contact lenses.Part 9:Ageing by exposure to UV and visible radiation(in vitro method)
  • GB/T 23362.1-2009 Methods for chemical analysis of high purity indium hydroxide.Part 1:Determination of arsenic content.Atomic fluorescence spectrometry
  • GB/T 23362.3-2009 Methods for chemical analysis of high purity indium hydroxide.Part 3:Determination of antimony content.Atomic fluorescene spectrometry
  • GB/T 23273.3-2009 Methods for chemical analysis of cobalt oxatate.Part 3:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry
  • GB/T 3884.10-2012 Methods for chemical analysis of copper concentrates.Part 10:Determination of Antimony content.Hydride generation atomic fluorescence spectrometry method
  • GB/T 8151.10-2012 Methods for chemical analysis of zinc concentrates.Part 10:Determination of tin content.Hydride generation-atomic fluorescence spectrometry
  • GB/T 8151.11-2012 Methods for chemical analysis of zinc concentrates.Part 11:Determination of antimony content.Hydride generation-atomic fluorescence spectrometry
  • GB/T 8152.11-2023 Methods for chemical analysis of lead concentrates - Part 11: Determination of mercury content by atomic fluorescence spectrometry and direct method of solid injection
  • GB/T 8762.2-1988 Yttrium oxide and europium oxide of phosphor grade--Determination of calcium oxide content--N2O-C2H2 flame atomic absorption spectrophotometric method
  • GB/T 11905-1989 Water quality--Determination of calcium and magnesium--Atomic absorption spectrophotometric method
  • GB 11905-1989 Determination of Water Quality Calcium and Magnesium - Atomic Absorption Spectrophotometry
  • GB/T 14353.8-1993 Methods for chemical analysis of copper ores lead ores and zinc ores. Determination of bismuth content. Hydride generationatomic fluorescence spectrometric method
  • GB/T 14422-1993 Analysis of water used in boiler and cooling system. Determination of benzotriazole. Ultraviolet spectrophotometry
  • GB/T 13293.2-1991 Higher purity copper cathode.Determination of bismuth content.Hydride generation-atomic fluorescence spectrometric method
  • GB/T 8151.7-2012 Methods for chemical analysis of zinc concentrates.Part 7:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry and the potassium bromate titrimetric method
  • GB/T 14423-1993 Analysis of water used in boiler and cooling system. 2-Mercaptobenzothiazole. Ultraviolet spectrophotometry
  • GB/T 11904-1989 Water quality--Determinatoin of potassium and sodium--Flame atomic absorption spectrophotometry
  • GB/T 3884.9-2012 Methods for chemical analysis of copper concentrates.Part 9:Determination of arsenic and bismuth contents.Hydride generation-atomic fluorescence spectrometry method The potassium bromate titration method and The silver diethyl dithiocarbamate photometric
  • GB/T 21131-2007 Environmental tobacco smoke.Estimation of its contribuion to respirable suspended particles.Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • GB/T 20127.2-2006 Steel and alloy - Determination of trace element contents - Part 2: Determination of arsenic content by hydride generation-atomic fluorescence spectrometric method
  • GB/T 20127.8-2006 Steel and alloy - Determination of trace element contents - Part 8: Determination of antimony content by hydride generation-atomic fluorescence spectrometric method
  • GB/T 20127.10-2006 Steel and alloy.Determination of trace element contents.Part 10: Determination of selenium content by hydride generation-atomic fluorescence spectrometric method

Korean Agency for Technology and Standards (KATS), Atomic Fluorescence and UV Spectroscopy

  • KS M ISO 6955-2016(2021) Analytical spectroscopic methods－Flame emission,atomic absorption, and atomic fluorescence－Vocabulary
  • KS M ISO 6955:2016 Analytical spectroscopic methods－Flame emission,atomic absorption, and atomic fluorescence－Vocabulary
  • KS M ISO 16474-3-2017(2019) Paints and varnishes ㅡ Methods of exposure to laboratory light sources ㅡ Part 3: Fluorescent UV lamps
  • KS M ISO 6955:2011 Analytical spectroscopic methods-Flame emission,atomic absorption, and atomic fluorescence-Vocabulary
  • KS M ISO 4892-3-2017(2022) Plastics－Methods of exposure to laboratory light sources－Part 3：Fluorescent UV lamps
  • KS M ISO 16474-3:2016 Paints and varnishes ㅡ Methods of exposure to laboratory light sources ㅡ Part 3: Fluorescent UV lamps
  • KS M ISO 16474-3:2017 Paints and varnishes ㅡ Methods of exposure to laboratory light sources ㅡ Part 3: Fluorescent UV lamps
  • KS I ISO 17733:2005 Workplace air－Determination of mercury and inorganic mercury compounds－Method by cold－vapour atomic absorption spectrometry or atomic fluorescence spectrometry
  • KS I ISO 17733-2005(2016) Workplace air－Determination of mercury and inorganic mercury compounds－Method by cold－vapour atomic absorption spectrometry or atomic fluorescence spectrometry
  • KS I ISO 20552:2021 Workplace air — Determination of mercury vapour —Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
  • KS I ISO 20552:2010 Workplace air－Determination of mercury vapour－Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
  • KS I ISO 17733:2021 Workplace air — Determination of mercury and inorganic mercury compounds — Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
  • KS B ISO 11151-1-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS M 9102-1996 Water quality-Determination of total mercury by flameless atomic absorption spectrometry(Method after pretreatment with ultraviolet radiation)
  • KS B ISO 11151-1:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-1:2003 Lasers and laser-related equipment-Standard optical components-Part 1:Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-1:2015 Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS L ISO 10058-3-2012(2022) Chemical analysis of magnesite and dolomite refractory products(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrophotometry(FAAS) and inductively coupled plasma atom
  • KS I ISO 20552-2010(2016) Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
  • KS L ISO 20565-3-2012(2017) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrometry(FAAS) and inductively
  • KS L ISO 20565-3-2012(2022) Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrometry(FAAS) and inductively
  • KS L ISO 10058-3-2012(2017) Chemical analysis of magnesite and dolomite refractory products(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrophotometry(FAAS) and inductively coupled plasma atom
  • KS L ISO 20565-3:2012 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method)-Part 3:Flame atomic absorption spectrometry(FAAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES)
  • KS I 20552-2010 Workplace air-Determination of mercury vapour-Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
  • KS M 9102-1996(2001) WATER QUALITY-DETERMINATION OF TOTAL MERCURY BY FLAMELESS ATOMIC ABSORPTION SPECTROMETRY(METHOD AFTER PRETREATMENT WITH ULTRAVIOLET RADITION)
  • KS D ISO 3981-2002(2022) Aluminum and aluminum alloys?Determination of nickel－Atomic absorption spectrophotometric method
  • KS D ISO 3981-2002(2017) Aluminum and aluminum alloys?Determination of nickel－Atomic absorption spectrophotometric method
  • KS L ISO 21587-3:2012 Chemical analysis of aluminosilicate refractory products-Part 3:Inductively coupled plasma and atomic absorption spectrometry methods
  • KS L ISO 10058-3:2012 Chemical analysis of magnesite and dolomite refractory products(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spectrophotometry(FAAS) and inductively coupled plasma atomic emission spectrometry(ICP-AES)
  • KS D ISO 3980:2002 Aluminium and aluminium alloys：Determination of copper content－Atomic absorption spectrophotometric method
  • KS D ISO 3981:2002 Aluminum and aluminum alloys ? Determination of nickel－Atomic absorption spectrophotometric method
  • KS D ISO 3256:2002 Aluminum and aluminum alloys－Determination of magnesium－Atomic absorption spectrophotometric method

KR-KS, Atomic Fluorescence and UV Spectroscopy

  • KS M ISO 6955-2016 Analytical spectroscopic methods－Flame emission,atomic absorption, and atomic fluorescence－Vocabulary
  • KS M ISO 4892-3-2017 Plastics－Methods of exposure to laboratory light sources－Part 3：Fluorescent UV lamps
  • KS C IEC 61228-2023 Fluorescent ultraviolet lamps used for tanning — Measurement and specification method
  • KS I ISO 20552-2021 Workplace air — Determination of mercury vapour —Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
  • KS I ISO 17733-2021 Workplace air — Determination of mercury and inorganic mercury compounds — Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
  • KS M ISO 11507-2012 Paints and varnishes－Exposure of coating to artificial weathering－ Exposure to fluorescent UV lamps and water

American National Standards Institute （ANSI), Atomic Fluorescence and UV Spectroscopy

  • ANSI/ASTM D4329:1999 Practice for Operating Light and Water Apparatus (Fluorescent UV and Condensation Type) for Exposure of Plastics
  • ANSI/ASTM D5208:2001 Practice for Operating Fluorescent UV and Condensation Apparatus for Exposure of Photodegradable Plastics (08.03)

Association Francaise de Normalisation, Atomic Fluorescence and UV Spectroscopy

  • T01-040:1982 Analytical spectroscopic methods. Flame emission, atomic absorption and atomic fluorescence. Vocabulary.
  • NF T90-139*NF EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry
  • NF T51-195-3:2013 Plastics - Methods of exposure to laboratory light sources - Part 3: fluorescent UV lamps
  • NF T51-195-3*NF EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3 : fluorescent UV lamps
  • NF EN ISO 4892-3:2016 Plastiques - Méthodes d'exposition à des sources lumineuses de laboratoire - Partie 3 : lampes fluorescentes UV
  • NF T30-089-3:2014 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3 : fluorescent UV lamps
  • NF T30-089-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3 : fluorescent UV lamps
  • NF EN ISO 16474-3:2021 Peintures et vernis - Méthodes d'exposition à des sources lumineuses de laboratoire - Partie 3 : lampes fluorescentes UV
  • NF EN IEC 61228:2020 Lampes fluorescentes à ultraviolet utilisées pour le bronzage - Méthode de mesure et de spécification
  • NF X43-205:2005 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry.
  • NF T37-001-10:2010 Coil coated metals - Test methods - Part 10 : resistance to fluorescent UV radiation and water condensation.
  • NF EN 13523-10:2017 Tôles prélaquées - Méthodes d'essai - Partie 10 : résistance à un rayonnement UV fluorescent et à la condensation de l'eau
  • NF M07-100:2000 Émulsions eau dans gazole - Dosage du soufre - Méthode par combustion et détection par fluorescence ultraviolette
  • NF ISO 17378-1:2014 Qualité de l'eau - Dosage de l'arsénic et de l'antimoine - Partie 1 : méthode par spectrométrie de fluorescence atomique à génération d'hydrures (HG-AFS)
  • NF X43-205*NF ISO 17733:2016 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
  • NF T37-001-10*NF EN 13523-10:2017 Coil coated metals - Test methods - Part 10 : resistance to fluorescent UV radiation and water condensation
  • NF ISO 17733:2016 Air des lieux de travail - Détermination du mercure et des composés inorganiques de mercure - Méthode par spectrométrie d'absorption atomique ou spectrométrie de fluorescence atomique de la vapeur froide
  • NF M07-122*NF EN 15486:2007 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method.
  • NF M07-059:1990 Petroleum products. Determination of sulfur in petroleum products. Combustion and detection by ultraviolet fluorescence.
  • NF S10-111-1*NF EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges
  • NF EN ISO 21587-3:2007 Analyse chimique des produits réfractaires d'aluminosilicates (méthode alternative à la méthode par fluorescence de rayons X) - Partie 3 : méthodes par spectrométrie d'absorption atomique (AAS) et spectrométrie d'émission atomique avec plasm...
  • NF EN ISO 11151-1:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 1 : composants pour les plages spectrales UV, visible et proche de l'infrarouge
  • NF B49-435-3*NF EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3 : flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP
  • NF T90-135-1*NF ISO 17378-1:2014 Water quality - Determination of arsenic and antimony - Part 1 : method using hydride generation atomic fluorescence spectrometry (HG-AFS)
  • NF B49-329-3*NF EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3 : flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
  • NF EN ISO 20565-3:2009 Analyse chimique des produits réfractaires contenant du chrome et des matières premières contenant du chrome (méthode alternative à la méthode par fluorescence de rayons X) - Partie 3 : méthodes par spectrométrie d'absorption atomique dans la ...
  • NF S10-111-1:2001 Laser and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges.
  • NF X31-081-2*NF EN 16175-2:2016 Sludge, treated biowaste and soil - Determination of mercury - Part 2 : cold-vapour atomic fluorescence spectrometry (CV-AFS)
  • NF EN 16175-2:2016 Boues, bio-déchets traités et sols - Détermination du mercure - Partie 2 : spectrométrie de fluorescence atomique en vapeur froide (SFA-VP)
  • NF EN 13068-3:2002 Essais non destructifs - Contrôle par radioscopie - Partie 3 : principes généraux de contrôle par radioscopie à l'aide de rayons X et gamma des matériaux métalliques
  • NF EN 12396-3:2000 Aliments non gras - Détermination des résidus de dithiocarbamates et de bisulfures de thiurame - Partie 3 : méthode spectrométrique UV utilisant le xanthogénate
  • NF B40-670-3*NF EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3 : inductively coupled plasma and atomic absorption spectrometry methods
  • NF X90-008-4*NF EN 14255-4:2006 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4 : terminology and quantities used in UV-, visible and IR-exposure measurements
  • XP CEN/TS 17784-1:2022 Engrais organo-minéraux - Identification des agents complexants - Partie 1 : méthode utilisant la spectrophotométrie UV-Vis et la gravimétrie
  • NF T12-029:1982 Cellulose. Determination of the manganese content. Sodium periodate photometric method and flame atomic absorption spectrometric method.

PH-BPS, Atomic Fluorescence and UV Spectroscopy

  • PNS IEC 61228:2021 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method

International Electrotechnical Commission (IEC), Atomic Fluorescence and UV Spectroscopy

  • IEC 61228:2020 RLV Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
  • IEC 61228:2008 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
  • IEC 61228:2020 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
  • IEC 62321-5:2013 Determination of certain substances in electrotechnical products - Part 5: Determination of cadmium, lead, and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP- OES and ICP-MS

SAE - SAE International, Atomic Fluorescence and UV Spectroscopy

  • SAE J2020-1989 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
  • SAE J2020-2002 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
  • SAE J2020-1995 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
  • SAE J2020-2022 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
  • SAE J2020-2016 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus

Society of Automotive Engineers (SAE), Atomic Fluorescence and UV Spectroscopy

  • SAE J2020-2003 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus

Professional Standard - Environmental Protection, Atomic Fluorescence and UV Spectroscopy

  • HJ 756-2015 Determination of water quality butyl xanthate by UV spectrophotometry
  • HJ 542-2009 Ambient air.Determination of mercury and its compounds.Cold atomic fluorescent spectrophotometry after sulfhydryl cotton preconcentraction
  • HJ 694-2014 Water Quality-Determination of Mercury，Arsenic，Selenium，Bismuth and Antimony -Atomic Fluorescence Spectrometry
  • HJ 542-2009(XG1-2018) Determination of Mercury in Ambient Air Accumulation of Mercapto Cotton - Cold Atomic Fluorescence Spectrophotometry "No. 1 Amendment"
  • HJ 1268-2022 Water quality—Determination of methyl mercury and ethyl mercury—Liquid chromatography - atomic fluorescence spectrometry
  • HJ 680-2013 Soil and sediment.Determination of mercury, arsenic, selenium, bismuth, antimony.Microwave dissolution/Atomic Fluorescence Spectrometry
  • HJ 1133-2020 Determination of arsenic, selenium, bismuth and antimony in ambient air and exhaust gas particulate matter by atomic fluorescence method
  • HJ 1269-2022 Soil and sediment—Determination of methyl mercury and ethyl mercury—Purge and trap/gas chromatography - cold vapor atomic fluorescencespectrometry
  • HJ 807-2016 Water quality-Determination of molybdenum and titanium by graphite furnace atomic absorption spectrophotometry

British Standards Institution (BSI), Atomic Fluorescence and UV Spectroscopy

  • BS EN 13506:2002 Water quality - Determination of mercury by atomic fluorescence spectrometry
  • BS EN 13506:2002*BS 6068-2.74:2002 Water quality - Determination of mercury by atomic fluorescence spectrometry
  • BS EN 61228:2008 Fluorescent ultraviolet lamps used for tanning — Measurement and specification method
  • BS EN IEC 61228:2020 Fluorescent ultraviolet lamps used for tanning. Measurement and specification method
  • BS EN 13523-10:2001 Coil coated metals - Test methods - Resistance to fluorescent UV light and water condensation
  • BS EN ISO 16474-3:2013 Paints and varnishes. Methods of exposure to laboratory light sources. Fluorescent UV lamps
  • BS EN ISO 16474-3:2021 Paints and varnishes. Methods of exposure to laboratory light sources. Fluorescent UV lamps
  • BS EN 15486:2007 Ethanol as a blending component for petrol. Determination of sulfur content. Ultraviolet fluorescence method
  • BS EN 13523-10:2010 Coil coated metals - Test methods - Resistance to fluorescent UV radiation and water condensation
  • 18/30378895 DC BS EN 61228. Fluorescent ultraviolet lamps used for tanning. Measurement and specification method
  • 19/30397049 DC BS EN ISO 16474-3. Paints and varnishes. Methods of exposure to laboratory light sources. Part 3. Fluorescent UV lamps
  • BS EN ISO 17852:2006 Water quality - Determination of mercury - Method using a combined preservation and digestion step followed by atomic fluorescence spectrometry
  • BS ISO 20552:2007 Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
  • BS ISO 17852:2006 Water quality - Determination of mercury - Method using a combined preservation and digestion step followed by atomic fluorescence spectrometry
  • BS ISO 17733:2004 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold vapour atomic absorption spectrometry or atomic fluorescence spectrometry
  • BS EN 13523-10:2017 Tracked Changes. Coil coated metals. Test methods. Resistance to fluorescent UV radiation and water condensation
  • BS EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
  • BS EN ISO 20565-3:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-A
  • BS ISO 17733:2015 Tracked Changes. Workplace air. Determination of mercury and inorganic mercury compounds. Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
  • BS ISO 17378-1:2014 Water quality. Determination of arsenic and antimony. Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
  • BS EN 16175-2:2016 Sludge, treated biowaste and soil. Determination of mercury - Cold-vapour atomic fluorescence spectrometry (CV-AFS)
  • BS EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Inductively coupled plasma and atomic absorption spectrometry methods
  • BS EN ISO 7980:1987 Water quality. Determination of calcium and magnesium. Atomic absorption spectrometric method
  • BS EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method). Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
  • BS EN ISO 10058-3:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)

European Committee for Electrotechnical Standardization（CENELEC）, Atomic Fluorescence and UV Spectroscopy

  • EN 61228:2008 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
  • EN IEC 61228:2020 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method

CENELEC - European Committee for Electrotechnical Standardization, Atomic Fluorescence and UV Spectroscopy

  • EN 61228:1994 Method of Measuring and Specifying the UV-Radiation of Ultraviolet Lamps Used for Sun-Tanning (Incorporates Amendment A1: 1996)

Danish Standards Foundation, Atomic Fluorescence and UV Spectroscopy

  • DS/EN 61228:2008 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
  • DS/ISO 16474-3:2021 Paints and varnishes – Methods of exposure to laboratory light sources – Part 3: Fluorescent UV lamps
  • DS/EN ISO 4892-3:2013 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
  • DS/EN 15486:2007 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
  • DS/EN ISO 16474-3:2021 Paints and varnishes – Methods of exposure to laboratory light sources – Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
  • DS/ISO 17733:2007 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold vapour atomic absorption spectrometry or atomic fluorescence spectrometry
  • DS/EN 13523-10:2010 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
  • DS/ISO/TS 17379-1:2013 Water quality - Determination of selenium - Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
  • DS/EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
  • DS/EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • DS/EN ISO 11507:2007 Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water
  • DS/EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
  • DS/CEN/TS 16175-2:2013 Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS)
  • DS/EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods
  • DS/EN 12396-3:2000 Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV spectrometric xanthogenate method
  • DS/EN 927-6:2006 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water

AENOR, Atomic Fluorescence and UV Spectroscopy

  • UNE-EN 61228:2008 Method of measuring and specifying fluorescent ultraviolet lamps used for tanning
  • UNE 84124:2014 Cosmetic raw materials. Determination of UV-filters by spectrophotometric absorbance.
  • UNE-EN 15486:2008 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
  • UNE-EN ISO 16474-3:2014 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013)
  • UNE 38162:1991 ALUMINIUM AND ALUMINIUM ALLOYS. DETERMINATION OF ZINC. ATOMIC ABSORPTION SPECTROPHOTOMETRIC METHOD.
  • UNE 38160:1990 ALUMINIUM AND ALUMINIUM ALLOYS. DETERMINATION OF MAGNESIUM. ATOMIC ABSORPTION SPECTROPHOTOMETRIC METHOD
  • UNE 38164:1992 ALUMINIUM AND ALUMINIUM ALLOYS. DETERMINATION OF COPPER. ATOMIC ABSORPTION SPECTROPHOTOMETRIC METHOD.
  • UNE 38163:1991 ALUMINIUM AND ALUMINIUM ALLOYS. DETERMINATION OF NICKEL. ATOMIC ABSORPTION SPECTROPHOTOMETRIC METHOD.

RU-GOST R, Atomic Fluorescence and UV Spectroscopy

  • GOST R IEC 61228-2014 Fluorescent ultraviolet lamps used for tanning. Measurement and specification method
  • GOST R 56866-2016 Gaseous hydrocarbons and liquefied petroleum gases. Determination of total volatile sulfur by method of ultraviolet fluorescence
  • GOST R ISO 20552-2011 Workplace air. Determination of mercury vapour. Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
  • GOST R 59422.1-2021 Optics and photonics. Lasers and laser-related equipment. Standard optical elements. Part 1. Standard optical elements for laser equipment operating in the ultraviolet, visible and near-infrared spectral ranges. General technical requirements
  • GOST R 55992.1-2014 In vitro diagnostic medical devices for fluorescent and immunofluorescent analysis of ?dried spot? of newborn's blood. Part 1. Instruments and accessories for fluorescent and immunofluorescent analysis of ?dried spot? of newborn's blood. Technical require
  • GOST R 55992.2-2014 In vitro diagnostic medical devices for fluorescent and immunofluorescent analysis of ?dried spot? of newborn's blood. Part 2. Sonsumables (kits of reagents) for fluorescent and immunofluorescent analysis of ?dried spot? of newborn's blood. Technical requ
  • GOST R 59608.3-2021 Optics and photonics. Optical coatings. Part 3. Classification by resistance to external factors and test methods

ES-UNE, Atomic Fluorescence and UV Spectroscopy

  • UNE-EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
  • UNE-EN ISO 16474-3:2022 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
  • UNE-EN IEC 61228:2020 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method (Endorsed by Asociación Española de Normalización in February of 2021.)
  • UNE-EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
  • UNE-EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
  • UNE-EN 16175-2:2016 Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS) (Endorsed by AENOR in December of 2016.)
  • UNE-EN 927-6:2019 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water

European Committee for Standardization (CEN), Atomic Fluorescence and UV Spectroscopy

  • EN ISO 4892-3:2013 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
  • EN ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
  • EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
  • prEN ISO 4892-3 rev Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
  • EN 13523-10:2010 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
  • EN 13523-10:2001 Coil Coated Metals - Test Methods - Part 10: Resistance to Fluorescent UV Light and Water Condensation
  • EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
  • EN ISO 16474-3:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
  • EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006)
  • CEN EN 13523-10-2001 Coil Coated Metals - Test Methods - Part 10: Resistance to Fluorescent UV Light and Water Condensation
  • EN ISO 11151-1:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000
  • EN ISO 20565-3:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
  • EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
  • EN ISO 10058-3:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) (ISO 10058-3:20
  • EN 16175-2:2016 Sludge@ treated biowaste and soil - Determination of mercury in aqua regia and nitric acid digests - Part 2: Cold vapour atomic fluorescence spectrometry (CVAFS)
  • PD CEN/TS 16175-2:2013 Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS)
  • EN 927-6:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
  • prEN 25666-2-1992 Water quality; determination of total mercury by flameless atomic absorption spectrometry; part 2: method after pretreatment with ultraviolet radiation (ISO 5666-2:1983)

CEN - European Committee for Standardization, Atomic Fluorescence and UV Spectroscopy

  • EN ISO 4892-3:2006 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps

国家市场监督管理总局、中国国家标准化管理委员会, Atomic Fluorescence and UV Spectroscopy

  • GB/T 16422.3-2022 Plastics—Methods of exposure to laboratory light sources—Part 3: Fluorescent UV lamps
  • GB/T 41072-2021 Surface chemical analysis—Electron spectroscopies—Guidelines for ultraviolet photoelectron spectroscopy analysis
  • GB/T 11060.8-2020 Natural gas—Determination of sulfur compounds—Part 8：Determination of total sulfur content by ultraviolet fluorescence method
  • GB/T 37396.1-2019 Lasers and laser-related equipment—Standard optical components—Part 1: Components for the UV,visible and near-infrared spectral ranges
  • GB/T 14353.19-2019 Methods for chemical analysis of copper ores, lead ores and zinc ores—Part 19: Determination of tin content—Hydride generation atomic fluorescence spectrometry
  • GB/T 14353.21-2019 Methods for chemical analysis of copper ores, lead ores and zinc ores—Part 21: Determination of arsenic content—Hydride generation atomic fluorescence spectrometry
  • GB/T 14352.21-2021 Methods for chemical analysis of tungsten ores and molybdenum ores—Part 21：Determination of arsenic content—Hydride generation atomic fluorescence spectrometry
  • GB/T 14352.22-2021 Methods for chemical analysis of tungsten ores and molybdenum ores—Part 22：Determination of antimony content—Hydride generation atomic fluorescence spectrometry
  • GB/T 14506.33-2019 Methods for chemical analysis of silicate rocks—Part 33: Determination of arsenic, stibium, bismuth and mercury elements content—Hydride generation atomic fluorescence spectrometry

International Organization for Standardization (ISO), Atomic Fluorescence and UV Spectroscopy

  • ISO/CD 4892-3:1975 Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
  • ISO/DIS 4892-3:2023 Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
  • ISO 6955:1982 Analytical spectroscopic methods; Flame emission, atomic absorption, and atomic fluorescence; Vocabulary Bilingual edition
  • ISO 16474-3:2013 Paints and varnishes.Methods of exposure to laboratory light sources.Part 3: Fluorescent UV lamps
  • ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
  • ISO 17733:2004 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
  • ISO 17733:2015 Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
  • ISO 20552:2007 Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
  • ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • ISO 20565-3:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
  • ISO 5666-2:1983 Water quality; Determination of total mercury by flameless atomic absorption spectrometry; Part 2: Method after pretreatment with ultraviolet radiation
  • ISO 11507:2007 Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water
  • ISO/DIS 16053-2:2023 Paints and varnishes — Coating materials and coating systems for exterior wood — Part 2: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
  • ISO/TS 17379-1:2013 Water quality.Determination of selenium.Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
  • ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods
  • ISO 17378-1:2014 Water quality - Determination of arsenic and antimony - Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
  • ISO 3980:1977 Aluminium and aluminium alloys; Determination of copper; Atomic absorption spectrophotometric method
  • ISO 3981:1977 Aluminium and aluminium alloys; Determination of nickel; Atomic absorption spectrophotometric method
  • ISO 3256:1977 Aluminium and aluminium alloys; Determination of magnesium; Atomic absorption spectrophotometric method

VN-TCVN, Atomic Fluorescence and UV Spectroscopy

  • TCVN 7724-2007 Water quality.Determination of merdury.Method using atomic fluorescence spectrometry

Group Standards of the People's Republic of China, Atomic Fluorescence and UV Spectroscopy

  • T/QAS 059-2021 Determination of Arsenic, Antimony and Bismuth in Brines by Atomic Fluorescence Spectrometry
  • T/NAIA 0133-2022 Determination of Mercury in Industrial Sulfuric Acid - Atomic Fluorescence Spectrophotometry
  • T/SDAQI 059-2021 Determination of Selenium and Stibium in Fertilizer by Atomic Fluorescence Spectrometry
  • T/CSTM 00198-2021 Graphene quantum dots—Determination of enzyme-like activities — Ultraviolet-visible spectrophotometry
  • T/QAS 082.10-2023 Chemical Analysis of Rock Salt and Glauber's Salt - Part 10: Determination of Arsenic by Atomic Fluorescence Spectrometry
  • T/CSTM 00761-2021 Nickel—Determination of selenium and tellurium contents —Hydride generation- atomic fluorescence spectrometric method
  • T/CSTM 00760-2021 Nickel—Determination of arsenic, antimony and bismuth contents —Hydride generation- atomic fluorescence spectrometric method
  • T/QAS 081.4-2023 Chemical analysis of polymetallic minerals - Part 4: Determination of tin by hydride generation - atomic fluorescence spectrometry
  • T/HNAEPI 006-2022 Soil and Sediment–Determination of arsenic, mercucy, selenium, bismuth, antimony-Water bath / Atomic Fluorescence Spectrophotometry
  • T/GAMA 20-2021 Additive manufacturing—Driving method for shape memory of polymer materials —UV thermal driving method

IT-UNI, Atomic Fluorescence and UV Spectroscopy

  • UNI EN ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps

National Health Commission of the People's Republic of China, Atomic Fluorescence and UV Spectroscopy

  • GBZ/T 316.3-2018 Determination of Lead in Blood - Part 3: Atomic Fluorescence Spectrometry

American Society for Testing and Materials (ASTM), Atomic Fluorescence and UV Spectroscopy

  • ASTM D4587-11(2019)e1 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
  • ASTM D4329-99 Standard Practice for Fluorescent UV Exposure of Plastics
  • ASTM D4329-21 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
  • ASTM G53-96 Practice for Operating Light- and Water-Exposure Apparatus (Fluorescent UV-Condensation Type) for Exposure of Nonmetallic Materials
  • ASTM E3022-18 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
  • ASTM D4587-23 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
  • ASTM D6625-13 Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
  • ASTM D6350-98 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
  • ASTM D6350-98(2003) Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
  • ASTM D6350-14 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
  • ASTM D7183-12 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-23 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM E275-08(2022) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
  • ASTM D4587-01 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
  • ASTM D4587-91 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
  • ASTM D4587-11 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
  • ASTM D458-85(1998) Standard practice for testing paints and related coatings and materials using fluorescent ultraviolet exposure devices
  • ASTM D7183-18 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-07e1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-07 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-18a(2023) Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-18a Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-15 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-18ae1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM E275-08(2013) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
  • ASTM E275-01 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
  • ASTM E275-93 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
  • ASTM D5453-05 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D4799/D4799M-08(2013)e1 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
  • ASTM E275-08 Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
  • ASTM D6625-13(2020) Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
  • ASTM D1017-51(1978)e1 Test Method for Benzene and Toluene in 250F and Lighter Petroleum Products by Ultraviolet Spectrophotometry
  • ASTM D5453-03 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D5453-03a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D5453-04 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D6667-04(2010) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D4799/D4799M-17(2023) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
  • ASTM D5184-01 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
  • ASTM D5184-01(2006) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
  • ASTM UOP800-79 Vanadium, Nickel and Iron in Petroleum Oils by Atomic Absorption Spectrophotometry
  • ASTM D6667-21 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D6667-01 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D5453-00 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D5453-00e1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D6667-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D6667-14(2019) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D6667-04 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM UOP989-14 Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
  • ASTM D6667-14 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D4799/D4799M-17 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)

工业和信息化部, Atomic Fluorescence and UV Spectroscopy

  • YS/T 1171.8-2017 Methods for chemical analysis of recycled zinc raw materials Part 8: Determination of mercury content by atomic fluorescence spectrometry and cold atomic absorption spectrometry
  • YS/T 3015.7-2017 Methods for chemical analysis of gold-loaded carbon Part 7: Determination of arsenic content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 3015.6-2017 Methods for chemical analysis of gold-loaded carbon Part 6: Determination of mercury content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
  • YS/T 1171.7-2017 Methods for chemical analysis of recycled zinc raw materials Part 7: Determination of arsenic and antimony amounts Atomic fluorescence spectrometry
  • YS/T 445.10-2019 Methods of chemical analysis of silver concentrates Part 10: Determination of antimony content Hydride generation-atomic fluorescence spectrometry and flame atomic absorption spectrometry
  • YS/T 1381-2020 Methods for chemical analysis of rhodium compounds - Determination of arsenic content Atomic fluorescence spectrometry
  • YS/T 1341.6-2019 Methods of chemical analysis of crude zinc Part 6: Determination of arsenic content by atomic fluorescence spectrometry
  • YS/T 1341.7-2019 Methods of chemical analysis of crude zinc Part 7: Determination of antimony content Atomic fluorescence spectrometry
  • YS/T 1341.8-2019 Methods of chemical analysis of crude zinc Part 8: Determination of tin content Atomic fluorescence spectrometry
  • YS/T 445.11-2019 Methods for chemical analysis of silver concentrates Part 11: Determination of bismuth content Hydride generation-atomic fluorescence spectrometry, flame atomic absorption spectrometry and Na2EDTA titration
  • YS/T 445.13-2019 Methods of chemical analysis of silver concentrates Part 13: Determination of mercury content by atomic fluorescence spectrometry
  • YS/T 1288.3-2018 Methods for chemical analysis of high-purity zinc Part 3: Determination of arsenic content Hydride generation-atomic fluorescence spectrometry
  • YS/T 445.3-2019 Methods for chemical analysis of silver concentrates Part 3: Determination of arsenic content Hydride generation-atomic fluorescence spectrometry and potassium bromate titration

Professional Standard - Commodity Inspection, Atomic Fluorescence and UV Spectroscopy

  • SN/T 3117-2012 Determination of arsenic,antimony and mercury in leather.Atomic fluorescence spectrometry
  • SN/T 4117-2015 Determination of total volatile sulfur in liquefied petroleum gases and gaseous hydrocarbons by ultraviolet fluorescence
  • SN/T 2004.1-2005 Determination of mercury in electrical and electronic equipment-Part 1:Hydride generation-atomic fluorescence spectrometric method
  • SN/T 2004.7-2006 Determination of lead,cadmium in electrical and electronic equipment.Part 7:Atomic fluorescence spectrometry
  • SN/T 3323.4-2012 Mill scale.Part 4:Determination of arsenic and mercury.Atomic fluorescence spectrometric method
  • SN/T 3249.3-2012 Imitation jewelry & accessory.Part 3:Determination of antimony and mercury content.Atomic fluorescence spectrometric method
  • SN/T 3811-2014 Determination of arsenic and antimony in petroleum naphthas.Hydride generation atomic fluorescence spectrometric method
  • SN/T 2721-2010 Determination of arsenic and mercury in export-import ores.Atomic fluorescence spectrometric method
  • SN/T 2888-2011 Determination of antimony in high-density polyethylene, a food contact material for export, by atomic fluorescence spectrometry
  • SN/T 2297.7-2015 Analysis method for gypsum and gysum products.Part 7:Determination of arsenic and mercury content.Atomic fluorescence spectrum
  • SN/T 2765.4-2014 Determination of arsenic content in iron ores for import and export.Part 4:Hydride generation atomic fluorescence spectrometric method
  • SN/T 0736.15-2013 Test method of import and export fertilizers.Part 15:Simultaneous determination of arsenic and mercury content by microwave-assisted digestion-atomic fluorescence spectrometry

Lithuanian Standards Office , Atomic Fluorescence and UV Spectroscopy

  • LST EN 15486-2007 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
  • LST EN 61228-2008 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method (IEC 61228:2008)
  • LST EN IEC 61228:2021 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method (IEC 61228:2020)
  • LST EN ISO 4892-3:2006 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2006)
  • LST EN ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
  • LST EN 13523-10-2010 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
  • LST EN ISO 20565-3:2009 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-
  • LST EN ISO 10058-3:2009 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) (ISO 10058-3:20
  • LST EN ISO 11151-1:2002 Laser and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2000)
  • LST EN ISO 11507:2007 Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007)
  • LST EN 12396-3-2000 Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV spectrometric xanthogenate method

Professional Standard - Ocean, Atomic Fluorescence and UV Spectroscopy

  • HY/T 152-2013 Speciation of trivalent arsenic and pentavalent arsenic in sea water by atomic fluorescence spectroscopy

PL-PKN, Atomic Fluorescence and UV Spectroscopy

  • PN-EN IEC 61228-2021-07 E Fluorescent ultraviolet lamps used for tanning - Measurement and specification method (IEC 61228:2020)
  • PN-EN ISO 16474-3-2021-06 E Paints and varnishes -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
  • PN C97087-1987 UV Spectrophotometric determination of phenols in coke and waste waters
  • PN C97088-1987 Coal derivative products UV spectrophotometric determination of tar acids content in coal tar and oils

Professional Standard - Non-ferrous Metal, Atomic Fluorescence and UV Spectroscopy

  • YS/T 555.3-2009 Methods for chemical analysis of molybdenum concentrate.Determination of arsenic conten.Atomic fluorescence spectrometry
  • YS/T 536.7-2009 Methods for chemical analysis of bismuth.Determination of arsenic content.Atomic fluorescence spectrometric method
  • YS/T 536.11-2009 Methods for chemical analysis of bismuth.Determination of mercury content.Atomic fluorescence spectrometric method
  • YS/T 1605.3-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 3: Determination of bismuth content— Flame atomic absorption spectrometry and atomic fluorescence spectrometry
  • YS/T 555.4-2009 Methods for chemical analysis of molybdenum concentrate.Determination of tin content.Atomic fluorescence spectrometry
  • YS/T 872-2013 Methods for chemical analysis gallium.Determination of mercury in industrial gallium.Atomic fluorescence spectrometer method
  • YS/T 710.4-2009 Method for chemical analysis of cobalt oxide.Part 4:Determination of arsenic content.Atomic fluorescence spectrometry
  • YS/T 556.7-2009 Methods for chemical analysis of antimony concentrates.Part 7:Determination of mercury content.Atomic fluorescence spectrometry
  • YS/T 229.2-2013 Methods for chemical analysis of high pure lead.Part 2:Determination of arsenic content.Atomic fluorescence spectrometry
  • YS/T 229.3-2013 Methods for chemical analysis of high pure lead.Part 3:Determination of antimony content.Atomic fluorescence spectrometry
  • YS/T 461.6-2003 The methods for chemical analysis of lead and zinc bulk concentrates-The determination of mercury content-The atomic fluorescence spectrometry method
  • YS/T 276.8-2011 Methods for chemical analysis of indium.Part 8:Determination of bismuth content.Method 1:Hydride generation-atomic fluorescence spectrometry.Method 2:Flame atomic absorption spectrometry
  • YS/T 226.1-2009 Methods for chemical analysis of selenium.Part 1:Determination of bismuth content.Hydride generation-atomic fluorescence spectrometry
  • YS/T 226.2-2009 Methods for chemical analysis of selenium.Part 2:Determination of antimony content-Hydride generation-atomic fluorescence spectrometry
  • YS/T 74.1-2010 Methods for chemical analysis of cadmium- Part 1: Determination of arsenic content- Hydride generation-atomic fluorescence spectrometry
  • YS/T 74.2-2010 Methods for chemical analysis of cadmium- Part 2: Determination of antimony content- Hydride generation-atomic fluorescence spectrometry
  • YS/T 227.1-2010 Methods for chemical analysis of tellurium-Part 1: Determination of bismuth content-Hydride generation-atomic fluorescence spectrometry
  • YS/T 227.10-2010 Methods for chemical analysis of tellurium-Part 10: Determination of arsenic content- Hydride generation-atomic fluorescence spectrometry
  • YS/T 74.9-2010 Mehtods for chemical analysis of cadmium- Part 9:Determination of tin content- Hydride generation-atomic fluorescence spectrometry
  • YS/T 461.6-2013 Methods for chemical analysis of lead and zinc bulk concentrates.Part 6:The determination of mercury content.Atomic fluorescence spectrometry
  • YS/T 276.1-2011 Methods for chemical analysis of indium.Part 1:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry
  • YS/T 1605.5-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 5: Determination of antimony content— Atomic fluorescence spectrometry
  • YS/T 1605.4-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 4: Determination of tin content— Atomic fluorescence spectrometry
  • YS/T 1115.14-2016 Methods for chemical analysis of copper ores and tailings.Part 14:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometric and potassium bromate titrimetric method
  • YS/T 556.6-2009 Methods for chemical analysis of antimony concentrates.Part 6:Determination of selenium content.Hydride generation-atomic fluorescence spectrometric method
  • YS/T 281.15-2011 Methods for chemical analysis of cobalt.Part 15:Determination of arsenic,antimony and bismuth content.Hydride generation-atomic fluorescence spectrometry
  • YS/T 745.8-2010 Methods for chemical analysis of copper anode slime- Part 8: Determination of arsenic content- Hydride generation-atomic fluorescence spectrometry method
  • YS/T 472.3-2005 Methods for chemical analysis of nickel concentrates and cobalt sulfide concentrates-Determination of mercury content-Hydride generation-atomic fluorescence spectrometry
  • YS/T 472.5-2005 Methods for chemical analysis of nickel concentrates and cobalt sulfide concentrates-Determination of arsenic content-Hydride generation-atomic fluorescence spectrometry
  • YS/T 820.17-2012 Methods for chemical analysis of laterite nickel ores.Part 17:Determination of arsenic,antimony and bismuth contents.Hydride generation-atomic fluorescence spectrometry
  • YS/T 990.8-2014 Methods for chemical analysis of copper matte.Part 8:Determination of arsenic content.Hydride generation-atomic fluorescence spectrometry、silver diethyldithiocarbamate spectrophotometry and potassium bromate titrimetry

IN-BIS, Atomic Fluorescence and UV Spectroscopy

Jilin Provincial Standard of the People's Republic of China, Atomic Fluorescence and UV Spectroscopy

  • DB22/T 1532-2011 Determination of Arsenic and Mercury in Ginseng by Atomic Fluorescence Method

Tianjin Provincial Standard of the People's Republic of China, Atomic Fluorescence and UV Spectroscopy

  • DB12/T 885-2019 Determination of Proanthocyanidins in Plant Extracts by UV/Vis Spectrophotometry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Atomic Fluorescence and UV Spectroscopy

  • GB/T 33086-2016 Water treatment chemical—Determination of arsenic and mercury—Atomic fluorescence spectrometry
  • GB/T 1819.17-2017 Methods for chemical analysis of tin concentrates—Part 17：Determination of mercury content—Atomic fluorescence spectrometric method
  • GB/T 34796-2017 Quantification and purity analysis of nucleic acid concentration in solution—Ultraviolet spectrophotometry
  • GB/T 36084-2018 Nanotechnology—Determination of copper, manganese and chromium ions in aqueous solution—Ultraviolet-visible spectrophotometry
  • GB/T 34100-2017 Test method for determination of total sulfur in light hydrocarbons，spark ignition engine fuel ,diesel engine fuel, and engine oil—Ultraviolet fluorescence method

Professional Standard - Agriculture, Atomic Fluorescence and UV Spectroscopy

  • NY/T 2822-2015 Speciation determination of arsenic and mercury in bee products.Atomic fluorescence spectrometry
  • SN/T 5053-2018 Determination of Arsenic, Mercury, Selenium, Tin and Bismuth in Antimony Concentrates by Hydride Atomic Fluorescence Spectrometry
  • 水产品质量安全检验手册 1.2.4.4-2005 Chapter 1 General Introduction Section 2 Analytical Methods for Aquatic Product Inspection 4. Physicochemical Analysis (4) Atomic Fluorescence Spectrometry

AT-ON, Atomic Fluorescence and UV Spectroscopy

  • OENORM EN ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021)
  • ONORM ISO 5666 Teil.2:1984 Water quality; determination of total mercury by flameless atomic absorption spectrometry; method after pretreatment with ultraviolett radiation

CH-SNV, Atomic Fluorescence and UV Spectroscopy

  • SN EN ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021)

GOSTR, Atomic Fluorescence and UV Spectroscopy

  • GOST IEC 61228-2019 Fluorescent ultraviolet lamps used for tanning. Method for measurement characteristics and requirements

Fujian Provincial Standard of the People's Republic of China, Atomic Fluorescence and UV Spectroscopy

  • DB35/T 1351-2013 Determination of total sulfur content in gaseous hydrocarbons and liquefied petroleum gases by ultraviolet fluorescence method

Zhejiang Provincial Standard of the People's Republic of China, Atomic Fluorescence and UV Spectroscopy

  • DB3301/T 117-2007 Determination of Organic Selenium and Inorganic Selenium in Rice by Atomic Fluorescence Spectrometry

Professional Standard - Geology, Atomic Fluorescence and UV Spectroscopy

  • DZ/T 0064.81-2021 Methods of Analytical Groundwater Quality Part 81: Determination of Mercury Amounts by Atomic Fluorescence Spectrometry
  • DZ/T 0064.11-2021 Analytical methods for groundwater quality - Part 11: Determination of arsenic content by hydride generation - atomic fluorescence spectrometry
  • DZ/T 0064.38-2021 Analytical methods for groundwater quality - Part 38: Determination of the amount of selenium by hydride generation - atomic fluorescence spectrometry
  • DZ/T 0279.13-2016 Methods of Analysis of Regional Geochemical Samples Part 13: Determination of Arsenic, Antimony, and Bismuth Determination of Hydride Generation—Atomic Fluorescence Spectrometry
  • DZ/T 0279.14-2016 Methods of Analysis of Regional Geochemical Samples Part 14: Selenium Determination of Hydride Generation - Atomic Fluorescence Spectrometry
  • DZ/T 0279.17-2016 Methods of Analysis of Regional Geochemical Samples - Part 17: Determination of Mercury Vapor Generation - Cold Atomic Fluorescence Spectroscopy
  • DZ/T 0279.15-2016 Methods of Analysis of Regional Geochemical Samples Part 15: Determination of Germanium Quantity and Hydride Generation - Atomic Fluorescence Spectrometry
  • DZ/T 0064.11-1993 Groundwater quality testing method Determination of arsenic by gas-liquid separation hydride atomic fluorescence method
  • DZ/T 0253.2-2014 Analytic methods for biologic samples in eco-geochemistry assessment.Part 2:Determination of selenium content.Fluorescent spectrophotometry
  • DZ/T 0253.3-2014 Analytic methods for biologic samples in eco-geochemistry assessment.Part 3: Determination of total mecury content.Cold atomic fluorescent spectrophotometry

Qinghai Provincial Standard of the People's Republic of China, Atomic Fluorescence and UV Spectroscopy

  • DB63/T 1872-2020 Determination of mercury and arsenic in forage grass by microwave digestion/atomic fluorescence method

Xinjiang Provincial Standard of the People's Republic of China, Atomic Fluorescence and UV Spectroscopy

  • DB65/T 4367-2021 Water Quality Determination of Methylmercury and Ethylmercury by Liquid Chromatography-Atomic Fluorescence Spectrometry

未注明发布机构, Atomic Fluorescence and UV Spectroscopy

Professional Standard - Chemical Industry, Atomic Fluorescence and UV Spectroscopy

  • HG/T 4550.4-2013 Determination of cadmium in waste chemicals.Part 4:Atomic fluorescence spectrometric method

Shandong Provincial Standard of the People's Republic of China, Atomic Fluorescence and UV Spectroscopy

  • DB37/T 4089-2020 Determination of thimerosal and phenylmercury in cosmetics by liquid chromatography-atomic fluorescence spectrometry

Jiangxi Provincial Standard of the People's Republic of China, Atomic Fluorescence and UV Spectroscopy

  • DB36/T 1243-2020 Determination of Organic Selenium and Inorganic Selenium in Rice by Hydride Atomic Fluorescence Spectrometry

NEMA - National Electrical Manufacturers Association, Atomic Fluorescence and UV Spectroscopy

  • NEMA C29.14A-2019 Composite Insulators Guy (Strain) Insulator Type (Ultra-Violet Light Resistant Polymer Material Covered Rod Type)

AT-OVE/ON, Atomic Fluorescence and UV Spectroscopy

  • OVE EN IEC 61228:2021 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method (( IEC 61228:2020) EN IEC 61228:2020) (german version)

Professional Standard - Petrochemical Industry, Atomic Fluorescence and UV Spectroscopy

  • SH/T 0689-2000 Standard test method for determination of total sulfur in light hydrocarbons,motor fuels and oils by ultraviolet fluorescence

国家质量监督检验检疫总局, Atomic Fluorescence and UV Spectroscopy

  • SN/T 4526-2016 Determination of organic selenium and inorganic selenium in exported aquatic products by hydride generation atomic fluorescence spectrometry

ES-AENOR, Atomic Fluorescence and UV Spectroscopy

NZ-SNZ, Atomic Fluorescence and UV Spectroscopy

  • AS/NZS 1580.483.2:1994 Paints and Related Materials - Methods of Test Method 483.2: Resistance to Artificial Weathering - Fluorescent UV-Condensation Type Instruments

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Atomic Fluorescence and UV Spectroscopy

  • GJB 5404.2-2005 Analysis methods for trace elements in super alloys. Part 2: Determination of bismuth content by hydride generation-atomic fluorescence spectrometric method
  • GJB 5404.9-2005 Analysis methods for trace elements in super alloys Part 9: Determination of antimony content by hydride generation atomic fluorescence spectrometric method
  • GJB 5404.12-2005 Analysis methods for trace elements in super alloys Part 12: Determination of tellurium content by hydride generation atomic fluorescence spectrometric method

Military Standard of the People's Republic of China-General Armament Department, Atomic Fluorescence and UV Spectroscopy

  • GJB 8781.9-2015 Methods for trace element analysis of high-temperature alloys Part 9: Determination of antimony content by hydride generation-atomic fluorescence spectrometry
  • GJB 8781.12-2015 Methods for trace element analysis of high-temperature alloys Part 12: Determination of tellurium content by hydride generation-atomic fluorescence spectrometry
  • GJB 8781.2-2015 Methods for trace element analysis of high-temperature alloys Part 2: Determination of bismuth content by hydride generation-atomic fluorescence spectrometry

海关总署, Atomic Fluorescence and UV Spectroscopy

  • SN/T 1732.24-2020 Pyrotechnic compositions for fireworks and firecrackers Part 24: Determination of arsenic content by atomic fluorescence method

中华人民共和国环境保护部, Atomic Fluorescence and UV Spectroscopy

  • GB 11904-1989 Water quality-Determination of potassium and sodium-Flame atomic absorption spectrophotometry

CZ-CSN, Atomic Fluorescence and UV Spectroscopy

  • CSN ISO 9647:1993 Steel and iron. Determination of vanadium content. Flame atomic absorption spectrometric method

Universal Oil Products Company (UOP), Atomic Fluorescence and UV Spectroscopy

  • UOP 989-2014 Trace Sulfur in LPG and Gaseous Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection

Anhui Provincial Standard of the People's Republic of China, Atomic Fluorescence and UV Spectroscopy

  • DB34/T 2127.7-2014 Analytical methods of regional geochemical survey samples Part 7: Determination of arsenic, antimony, bismuth and mercury by atomic fluorescence spectrometry

BELST, Atomic Fluorescence and UV Spectroscopy

  • STB 8058-2017 System for ensuring uniformity of measurements of the Republic of Belarus. Ultraviolet-visible-nearinfrared spectrophotometers. Methods of verification

  Spectrophotometer and UV, UV Spectrophotometer and UV Vis Spectroscopy, UV spectrophotometry and water quality spectrophotometry, Visible Spectrophotometer and UV, UV Spectrophotometer and UV Spectroscopy, UV spectrophotometer and, UV spectrophotometer and UV, Atomic Absorption Spectrophotometer and UV Spectroscopy, UV Spectrophotometer and UV Spectrophotometer, UV Absorption and UV Spectrophotometry, UV Spectrophotometry and UV Absorption, Atomic Fluorescence and Atomic Fluorescence Spectrophotometry, UV Spectrophotometry and UV Spectrophotometer, UV Absorption Spectroscopy and UV Spectrophotometry, Atomic Fluorescence and UV Spectroscopy, Chromogenic method and UV spectroscopy, UV and IR spectroscopic, UV Spectroscopy and UV Spectrophotometry, UV Spectrophotometer and Atomic Spectroscopy, UV Spectrophotometry and Proteins.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved