ZH
RU
ES
National Fund Conditions
National Fund Conditions, Total:148 items.
In the international standard classification, National Fund Conditions involves: Leisure. Tourism, Standardization. General rules, Furniture, Meat, meat products and other animal produce, Protection against crime, Measurement of force, weight and pressure, Construction industry, Services, Textile fibres, Road vehicle systems, Products of non-ferrous metals, Metrology and measurement in general, Pipeline components and pipelines, Valves, Products of the chemical industry, Welding, brazing and soldering, Vibrations, shock and vibration measurements, Mechanical testing, Linear and angular measurements, Cutting tools, Iron and steel products, Radiation measurements, Nuclear energy engineering, Non-ferrous metals, Powder metallurgy, Semiconducting materials, Aerospace fluid systems and components, Noise with respect to human beings, Bearings, Agricultural machines, implements and equipment, Electrical wires and cables, Lamps and related equipment, Road engineering, Fasteners, External water conveyance systems, External sewage systems, Soil quality. Pedology, Solar energy engineering, Elements of buildings, Structures of buildings, Construction materials, AGRICULTURE, Ergonomics.
GB-REG, National Fund Conditions
Xinjiang Provincial Standard of the People's Republic of China, National Fund Conditions
RU-GOST R, National Fund Conditions
- GOST R 33.3.02-2008 United russian insurance fund of documentation. Insurance copies of documentation being a national scientific, cultural and historical heritage. General requirements for conditions of storage
- GOST 8.501-1984 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring instruments of periodical pressure over the range 1-250 MPa at frequencies up to 10 kHz
- GOST R 33.505-2003 United Russian insurance fund of documentation. The order of creation of insurance fund of documentation copies being a national scientific, cultural and historical heritage
- GOST R 8.882-2015 State system for ensuring the uniformity of measurements. The volume of natural gas. Method of error calculations in measurements of natural gas volume at reference conditions. Basic principles
- GOST 21945-1976 Seamless hot-rolled tubes of alloys based on titanium. Specifications
- GOST 22897-1986 Seamless cold-deformed pipes from alloys based on titanium. Specifications
- GOST 16130-1990 Welding wire and rods of copper and copper alloys. Specifications
- GOST 25051.4-1983 Electrodynamic vibration testing equipment. General specifications
- GOST 8.050-1973 State system for ensuring the uniformity of measurements. Reference conditions for linear and angular measuruments
- GOST R 33.1.02-2008 United russian insurance fund of documentation. Insuranse copies of cinemadocumentation and photodocumentation. General specifications
- GOST R ISO 389-9-2014 State system for ensuring the uniformity of measurements. Acoustics. Reference zero for the calibration of audiometric equipment. Part 9. Preferred test conditions for the determination of reference hearing threshold levels
- GOST 8.566-2011 State system for ensuring the uniformity of measurements. Interstate data system on physical constants and properties of substances and materials. Basic provisions
- GOST 17.5.3.02-1990 Nature protection. Lands. Rates for shelter belts allotment along railroads and highways on lands of state forest reserves
- GOST R IEC 60904-2-2013 State system for ensuring the uniformity of measurements. Photovoltaic devices. Part 2. Requirements for reference solar devices
- GOST R 8.735.2-2013 State system for ensuring the uniformity of measurements. State hierarchy scheme for measuring instruments of the content of organic components in liquid and solid mediums and materials. Transfer of the units from the state primary standard based on liqui
- GOST 23486-1979 Wall metal-faced sandwich panels with polyurethane foam thermal insulation. Specifications
- GOST R 57434-2017 Primary aluminum and alloys based on it. Product form and delivery conditions. Marking, packing, transportation and storage
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, National Fund Conditions
- GB/T 3325-1995 Metal furniture--General technical requirements
- GB/T 3325-2008 Metal furniture.General technical requirements
- GB/T 4654-2008 General technical specifications for non-metallic substrate infrared radiant heaters
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, National Fund Conditions
- GB/T 3325-2017 General technical requirements for metal furniture
- GB/T 35740-2017 Specification of nickel and nickel alloy castings for industrial valves
Professional Standard - Business, National Fund Conditions
- SB/T 10408-2007 Requirements of cold storage for national stored frozen meat
国家市场监督管理总局、中国国家标准化管理委员会, National Fund Conditions
- GB/T 37553-2019 Universal anti-counterfeiting technical requirements of national credible certificate
- GB/T 39644-2021 Plain bearings—Technical specifications for Tin-based alloy plain bearings of rotating machinery
German Institute for Standardization, National Fund Conditions
- DIN 68856-4:1983-08 Hardware for furniture; terms for furniture fittings; holding devices, flap stays, lid stays
- DIN EN 1990/NA/A1:2012 National Annex - Nationally determined parameters - Eurocode: Basis of structural design; Amendment A1
CZ-CSN, National Fund Conditions
Shanxi Provincial Standard of the People's Republic of China, National Fund Conditions
商务部, National Fund Conditions
- SB/T 11218-2018 National Raw Silk Reserve Warehouse Condition Requirements and Management Specifications
Group Standards of the People's Republic of China, National Fund Conditions
- T/GDBX 030-2020 General technical requirements of cabinets for aluminum alloy furniture
- T/CEC 229-2019 Polyolefin-based conductive material-coated metal conductor technical conditions
- T/CNEA 102.9-2021 PWR pressure boundary components—Welding— Part9:Nickel-based alloy covered electrodes
- T/CEC 399.1-2020 Specifications for metal-based bulk conductors Part 1: Gap-type conductors
- T/CEC 399.2-2021 Specifications for metal-based bulk conductors Part 2: Heat-resistant aluminum alloy stranded wires with aluminum clad Invar cores
- T/CEC 399.3-2020 Specifications for metal-based bulk conductors Part 3: Steel-core high-conductivity heat-resistant aluminum alloy conductors
CN-STDBOOK, National Fund Conditions
- 图书 3-8744 Interpretation of the provisions of the national standard GB 7258-2017 "Technical Conditions for Motor Vehicle Operation Safety"
The American Road & Transportation Builders Association, National Fund Conditions
- AASHTO M 285M_M 285-2007 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
CU-NC, National Fund Conditions
- NC 96-02-19-1987 National System for Fire Protection. Building Constructions for Storinq Solid Fuels General Requirements
Professional Standard-Ships, National Fund Conditions
- CB/T 102-1996 Tin-based alloy bearing bush casting technical conditions
机械工业部, National Fund Conditions
- JB/T 4272-1994 Steam turbine tin-based alloy bearing technical conditions
HU-MSZT, National Fund Conditions
Professional Standard - Machinery, National Fund Conditions
- JB/T 9138-1999 Sintered iron-based automotive shock-absorbers.Specifications
- JB/T 12718-2016 Copper-based powder metallurgy spray friction plate technical conditions
- JB/T 10311-2001 Specification for metal based composite insert solid self - lubricating sliding bearings
- JB/T 10767-2007 Copper powder metaliurgy wet brake fyiction lining of lorry loader.Specifications
- JB/T 9135-2011 Ferrous powder metallurgy brake friction linings of medium load automobile
Professional Standard - Aviation, National Fund Conditions
- HB 5226-1982 Specifications for water-based cleaning agents for metal materials and parts
- HB 5331-1985 Technical conditions of K17G nickel-based casting superalloy for aviation
Association Francaise de Normalisation, National Fund Conditions
- NF EN 1990/NA:2011 Eurocodes structuraux - Bases de calcul des structures - Annexe nationale à la NF EN 1990:2003
- NF P43-000:2003 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements - National complement
- NF P18-711-2:1992 Eurocode 2 《Design of concrete structures》 and National Application Document - Part 1-1:General rules and rules for buildings - Clause 2:Basis of design
- FD CEN/TR 1295-2:2006 Calcul de résistance mécanique des canalisations enterrées sous diverses conditions de charge - Partie 2 : résumé des méthodes nationales de dimensionnement
- FD P16-120-2*FD CEN/TR 1295-2:2006 Structural design of buried pipelines under various conditions of loading - Part 2 : summary of nationally established methods of design
British Standards Institution (BSI), National Fund Conditions
- DD ENV 1991-1-1996 Basis of design and actions on structures. Basis of design (together with United Kingdom national application document)
- DD ENV 1991-2-4-1997 Basis of design and actions on structures. Actions on structures. Wind actions (together with United Kingdom National Application Document)
- DD ENV 1991-2-2-1996 Basis of design and actions on structures. Actions on structures exposed to fire (together with United Kingdom National Application Document)
Professional Standard - Ferrous Metallurgy, National Fund Conditions
- YB/T 5239-1993 Technical conditions of ferromanganese alloy 4J59 for non-magnetic magnetic scale substrate
European Association of Aerospace Industries, National Fund Conditions
- AECMA PREN 2103-1988 Steel Nickel Base and Cobolt Base Alloy Remelting Stock and Castings - Technical Specification - Part 1 - General Requirements
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., National Fund Conditions
- IEEE C136.6-1997 American National Standard for Roadway Lighting Equipment - Metal Heads and Reflector Assemblies - Mechanical and Optical Interchangeability
Institute of Electrical and Electronics Engineers (IEEE), National Fund Conditions
- IEEE/ANSI N42.17A-2003 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Instrumentation for Use in Normal Environmental Conditions
- ANSI Std N42.17C-1989 American National Standard Performance Specifications for Health Physics Instrumentation. Portable Instrumentation for Use in Extreme Environmental Conditions
- IEEE/ANSI N42.17A-1989 American National Standard Performance Specifications for Health Physics Instrumentation - Portable Instrumentation for Use in Normal Environmental Conditions
- ANSI/IEEE Std C37.40-1981 American National Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
- IEEE Std C37.40-1981 American National Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
- ANSI N42.17AC-2022 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Survey Instrumentation for Use in Normal and Extreme Environmental Conditions
- IEEE/ANSI N42.17AC-2022 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Survey Instrumentation for Use in Normal and Extreme Environmental Conditions
- IEEE Std C136.6-1997 American National Standard for Roadway Lighting Equipment - Metal Heads and Reflector Assemblies - Mechanical and Optical Interchangeability Revision of ANSI C136.6-1990
- IEEE Std C37.51-1989 American National Standard for Switchgear--Metal-Enclosed Low-Voltage AC Power- Circuit-Breaker Switchgear Assemblies--Conformance Test Procedures
- IEEE/ASA C37.40-1962 ASA American National Standard Service Conditions and Definitions for Distribution Cutouts and Fuse Links, Secondary Fuses, Distribution Enclosed Single Pole Air Switches, Power Fuses, Fuse Disconnecting Switches, and Accessories
Professional Standard - Nuclear Industry, National Fund Conditions
- EJ/T 481-1999 Specification for nickel base alloy wires of springs for pressurized water reactor nuclear power plants
- EJ/T 1122-2000 Specification for SG6 Co-based alloy of the CRDM for pressurized water reactor nuclear power plants
- EJ/T 1124-2000 Specification for Ni-based alloy seamless tube of the CRDM penetrater for pressurized water reactor nuclear power plants
ES-UNE, National Fund Conditions
- UNE 127338:2022 Requirements and delivery and reception conditions of concrete paving blocks. National complement to the Standard UNE-EN 1338
- UNE 127339:2022 Requirements and delivery and reception conditions of concrete paving flags. National complement to the Standard UNE-EN 1339
Defense Logistics Agency, National Fund Conditions
- DLA MIL-PRF-19500/744 A-2010 SEMICONDUCTOR DEVICE, FIELD EFFECT TRANSISTOR, N-CHANNEL, RADIATION HARDENED (TOTAL DOSE AND SINGLE EVENT EFFECTS), LOGIC-LEVEL SILICON, TYPES 2N7616UB, 2N7616UBC, 2N7616UBN, 2N7616UBCN, JANTXVR, JANTXVF, JANSR, AND JANSF
- DLA MIL-PRF-19500/744 C-2012 SEMICONDUCTOR DEVICE, FIELD EFFECT TRANSISTOR, N-CHANNEL, RADIATION HARDENED (TOTAL DOSE AND SINGLE EVENT EFFECTS), LOGIC-LEVEL SILICON, TYPES 2N7616UB, 2N7616UBC, 2N7616UBN, 2N7616UBCN, JANTXVR, JANTXVF, JANSR, AND JANSF
- DLA MIL-PRF-19500/745 B-2010 SEMICONDUCTOR DEVICE, FIELD EFFECT TRANSISTOR, P-CHANNEL, RADIATION HARDENED (TOTAL DOSE AND SINGLE EVENT EFFECTS), LOGIC-LEVEL SILICON, TYPES 2N7626UB, 2N7626UBC, 2N7626UBN, 2N7626UBCN, JANTXVR, JANTXVF, JANSR, AND JANSF
- DLA MIL-PRF-19500/745 C-2011 SEMICONDUCTOR DEVICE, FIELD EFFECT TRANSISTOR, P-CHANNEL, RADIATION HARDENED (TOTAL DOSE AND SINGLE EVENT EFFECTS), LOGIC-LEVEL SILICON, TYPES 2N7626UB, 2N7626UBC, 2N7626UBN, 2N7626UBCN, JANTXVR, JANTXVF, JANSR, AND JANSF
- DLA MIL-PRF-19500/745 D-2012 SEMICONDUCTOR DEVICE, FIELD EFFECT TRANSISTOR, P-CHANNEL, RADIATION HARDENED (TOTAL DOSE AND SINGLE EVENT EFFECTS), LOGIC-LEVEL SILICON, TYPES 2N7626UB, 2N7626UBC, 2N7626UBN, 2N7626UBCN, JANTXVR, JANTXVF, JANSR, AND JANSF
IX-EU/EC, National Fund Conditions
- EEC/4059/89-1989 Council Regulation Laying Down the Conditions Under Which Non-resident Carriers May Operate National Road Haulage Services Within a Member State
- COM(88) 596-1988 Amendment to the Proposal for a Council Regulation (EEC) Laying Down the Conditions under Which Non-Resident Carriers may Operate National Road Passenger Transport Services Within a Member State
- COM(89) 9-1989 Proposal for a Council Regulation (EEC) on Animal Health Conditions Governing Intra- Community Trade in and Imports from Third Countries of Poultry and Hatching Eggs
- COM(88) 785-1989 Proposal for a Council Regulation (EEC) on Animal Health Conditions Governing Intra- Community Trade in and Importation from Third Countries of Embryos of Domestic Animals of the Bovine Species
- 90/539/EEC-1990 Council Directive on Animal Health Conditions Governing Intra- Community Trade in and Imports from Third Countries of, Poultry and Hatching eggs
Society of Automotive Engineers (SAE), National Fund Conditions
- SAE AS7112/3-2003 Nadcap Requirements for Couplings and Formed Sheet Metal Components
US-CFR-file, National Fund Conditions
- CFR 15-742.4-2013 Commerce and foreign trade. Part742:Control policy—ccl based controls. Section742.4:National security.
- CFR 26-1.1291-1T-2013 Internal revenue. Part1:Income taxes (continued). Section1.1291-1T:Taxation of United States persons that are shareholders of section 1291 funds (temporary).
- CFR 11-300.31-2014 Federal elections. Part300:Non-federal funds. SubpartB:State, district, and local party committees and organizations. Section300.31:Receipt of levin funds.
- CFR 34-682.406-2013 Education. Part682:Federal family education loan (ffel) program. Section682.406:Conditions for claim payments from the Federal Fund and for reinsurance coverage.
- CFR 24-92.213-2013 Housing and Urban Development. Part92:Home investment partnerships program. Section92.213:HOME Funds and Public Housing.
- CFR 32-161.9-2014 National defense. Part161:Identification (id) cards for members of the uniformed services, their dependents, and other eligible individuals. Section161.9:DoD benefits.
- CFR 7-226.4-2013 Agriculture. Part226:Child and adult care food program. Section226.4:Payments to States and use of funds.
- CFR 32-161.22-2014 National defense. Part161:Identification (id) cards for members of the uniformed services, their dependents, and other eligible individuals. Section161.22:Benefits for foreign affiliates.
- CFR 7-3402.19-2014 Agriculture. Part3402:Food and agricultural sciences national needs graduate and postgraduate fellowship grants program. SubpartE:Supplementary Information. Section3402.19:Terms and conditions of grant awards.
- CFR 33-133.5-2013 Navigation and navigable waters. Part133:Oil spill liability trust fund; state access. Section133.5:Requests: General.
- CFR 32-161.17-2014 National defense. Part161:Identification (id) cards for members of the uniformed services, their dependents, and other eligible individuals. Section161.17:Benefits for surviving dependents.
- CFR 32-161.18-2014 National defense. Part161:Identification (id) cards for members of the uniformed services, their dependents, and other eligible individuals. Section161.18:Benefits for abused dependents.
- CFR 26-53.6071-1T-2013 Internal revenue. Part53:Foundation and similar excise taxes. Section53.6071–1T:Time for filing returns (temporary).
- CFR 32-161.15-2014 National defense. Part161:Identification (id) cards for members of the uniformed services, their dependents, and other eligible individuals. Section161.15:Benefits for Disabled American Veterans (DAV).
- CFR 11-300.12-2014 Federal elections. Part300:Non-federal funds. SubpartA:National party committees. Section300.12:Transition rules.
- CFR 32-161.1-2014 National defense. Part161:Identification (id) cards for members of the uniformed services, their dependents, and other eligible individuals. Section161.1:Purpose.
- CFR 32-161.3-2014 National defense. Part161:Identification (id) cards for members of the uniformed services, their dependents, and other eligible individuals. Section161.3:Definitions.
- CFR 32-161.4-2014 National defense. Part161:Identification (id) cards for members of the uniformed services, their dependents, and other eligible individuals. Section161.4:Policy.
- CFR 32-161.5-2014 National defense. Part161:Identification (id) cards for members of the uniformed services, their dependents, and other eligible individuals. Section161.5:Responsibilities.
- CFR 32-161.6-2014 National defense. Part161:Identification (id) cards for members of the uniformed services, their dependents, and other eligible individuals. Section161.6:Procedures.
- CFR 32-161.16-2014 National defense. Part161:Identification (id) cards for members of the uniformed services, their dependents, and other eligible individuals. Section161.16:Benefits for transitional health care members and dependents.
UNKNOWN, National Fund Conditions
- GB 16151.5-2008(XG1-2009) Amendment No. 1 to the National Standard of "Technical Conditions for Agricultural Machinery Operation Safety Part 5: Trailer"
- GB 16151.5-2008/XG1-2009 Amendment No. 1 to the National Standard of "Technical Conditions for Agricultural Machinery Operation Safety Part 5: Trailer"
- GB 16151.1-2008/XG1-2009 "Agricultural Machinery Operation Safety Technical Conditions Part 1: Tractor" National Standard No. 1 Amendment
- GB 16151.1-2008(XG1-2009) "Agricultural Machinery Operation Safety Technical Conditions Part 1: Tractor" National Standard No. 1 Amendment
- GB 16151.12-2008(XG1-2009) "Agricultural Machinery Operation Safety Technical Conditions Part 12: Grain Combine Harvester" National Standard No. 1 Amendment
- GB 16151.12-2008/XG1-2009 "Agricultural Machinery Operation Safety Technical Conditions Part 12: Grain Combine Harvester" National Standard No. 1 Amendment
International Organization for Standardization (ISO), National Fund Conditions
- ISO 8555-4:1987 Hardware for furniture; Terms for furniture fittings; Part 4 : Holding devices, flap stays, lid stays Bilingual edition
- ISO/TR 7250-2:2010/Amd 1:2013 Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from national populations; Amendment 1
- ISO 4540:1980 Metallic coatings; Coatings cathodic to the substrate; Rating of electroplated test specimens subjected to corrosion tests
Aerospace Industries Association/ANSI Aerospace Standards, National Fund Conditions
- AIA/NAS NA 0062-1994 Bolt, Close Tolerance, Spline Drive, Alloy Steel, 1550 MPa, Metric (for Description of Status Notes See NAS380) (Rev. 2)
CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, National Fund Conditions
- CEPT T/R 21-06 E-1986 Conditions under Which Land Mobile Equipments May Be Carried but without Being Operated During Short Journeys and Stays within CEPT Countries
Danish Standards Foundation, National Fund Conditions
- DS/CEN/TR 1295-2:2006 Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design
AENOR, National Fund Conditions
- UNE-CEN/TR 1295-2:2007 IN Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design
Indonesia Standards, National Fund Conditions
American Society for Testing and Materials (ASTM), National Fund Conditions
- ASTM B249/B249M-12 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
- ASTM C1788-14 Standard Specification for Non Metallic Plaster Bases 40;Lath41; Used with Portland Cement Based Plaster in Vertical Wall Applications
- ASTM B249/B249M-10 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
- ASTM B249/B249M-11 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
- ASTM C1764-12 Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications
European Committee for Standardization (CEN), National Fund Conditions
- EN ISO 4540:1995 Metallic Coatings - Coatings Cathodic to the Substrate - Rating of Electroplated Test Specimens Subjected to Corrosion Tests Superseded by EN ISO 10289:2001