ZH
RU
ES
Humid heat aging conditions
Humid heat aging conditions, Total:192 items.
In the international standard classification, Humid heat aging conditions involves: Plastics, Cellular materials, Leather technology, Paper and board, Products of the textile industry, Construction materials, Non-ferrous metals, Surface treatment and coating, Waxes, bituminous materials and other petroleum products, Rubber, Materials for aerospace construction, Road engineering, Adhesives, Equipment for the chemical industry, Fibre optic communications, Solar energy engineering, Environmental testing, Electricity. Magnetism. Electrical and magnetic measurements, Insulating materials, Footwear, Pipeline components and pipelines, Elements of buildings, Protection of and in buildings, Manufacturing processes in the rubber and plastics industries, Raw materials for rubber and plastics, Pulps, Iron and steel products.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Humid heat aging conditions
- GB/T 22894-2008 Paper and board.Accelerated ageing.Moist heat treatment at 80℃ and 65℃ relative humidity
- GB/T 42164-2022 Leather—Chemical tests—Thermal ageing of leather and determination of hexavalent chromium
- GB/T 12665-1990 Requirements of damp-heat testing of electrical machine for service in general environmental condition
- GB/T 12665-2008 Requirements of damp-heat testing of electrical machine for sevice in general environmental condition
- GB/T 11048-2008 Textiles.Physiological effects.Measurement of thermal and wate-vapour resistance under steady-state conditions
- GB/T 30808-2014 Thermal insulation products for buildings.Determination of retention rate on tensile strength perpendicular to the faces in hygrothermal conditions
- GB/T 30806-2014 Thermal insulating products for building applications.Determination of dimensional stability under specified temperature and humidity comditions
VN-TCVN, Humid heat aging conditions
- TCVN 7068-3-2008 Paper and board.Accelerated ageing.Part 3: Moist heat treatment at 80 degrees C and 65% relative humidity
- TCVN 7068-1-2008 Paper and board.Accelerated ageing.Part 1: Dry heat treatment at 105 degrees C
- TCVN 7068-4-2008 Paper and board.Accelerated ageing.Part 4: Dry heat treatment at 120 or 150 degrees C
American Society for Testing and Materials (ASTM), Humid heat aging conditions
- ASTM D7444-18 Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics
- ASTM D7444-11 Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics
- ASTM D7444-18a Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics
- ASTM D2126-15 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
- ASTM D2126-20 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
- ASTM D5065-95 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces
- ASTM D5065-01 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces
- ASTM D5065-07 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces
- ASTM D3434-00 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
- ASTM D3434-00(2006) Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
- ASTM D1183-96e1 Standard Test Methods for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
- ASTM D3434-00(2013) Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
- ASTM D1183-03(2019) Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
- ASTM D1183-03 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
- ASTM D1183-03(2011) Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
- ASTM D4798-04 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
- ASTM D4798/D4798M-09 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
- ASTM D4798/D4798M-11 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
- ASTM D4798/D4798M-11(2021) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
- ASTM D4798-08 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
- ASTM D4798/D4798M-10 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
- ASTM D2383-97 Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions
- ASTM D2383-97(2001) Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions
- ASTM D4798-01 Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
- ASTM D4798-00 Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
- ASTM D4798/D4798M-11(2016) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
Association Francaise de Normalisation, Humid heat aging conditions
- NF Q03-026:1987 Paper and board. Accelerated ageing. Moist heat treatment at 90 degrees C and at 25 per cent relative humidity.
- FD Q03-035-3*FD ISO/DIS 5630-3:1995 Paper and board. Accelerated ageing. Part 3 : moist heat treatment at 80 degrees celcius and 65 per cent relative humidity.
- FD ISO/DIS 5630-3:1995 Papier et carton - Vieillissement accéléré - Partie 3 : traitement à la chaleur humide à 80 degrés Celsius et 65 % d'humidité relative.
- XP CEN/TS 12697-52:2017 Mélanges bitumineux - Méthodes d'essai - Partie 52 : conditionnement pour l'obtention d'un vieillissement par oxydation
- NF EN 12224:2002 Géotextiles et produits apparentés - Détermination de la résistance au vieillissement dû aux conditions climatiques
- NF T76-109*NF EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints.
- NF G35-013:1980 Revêtements de sol textiles fabriqués à la machine - Détermination de la variation des dimensions due à diverses conditions de mouillage et de chaleur
- NF P98-818-45:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45 : Saturation Ageing Tensile Stiffness (SATS) conditioning test.
- NF EN 986:2006 Revêtements de sol textiles - Dalles - Détermination de la variation des dimensions et de l'incurvation due aux effets de diverses conditions de mouillage et de chaleur
- NF P75-208/A1:2006 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions.
- NF P75-208:1997 Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions.
- NF EN 1604:2013 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la stabilité dimensionnelle dans des conditions de température et d'humidité spécifiées
- NF P20-513:1985 METHODS OF TESTING DOORS. BEHAVIOUR UNDER HUMIDITY VARIATIONS OF DOOR LEAVES PLACED IN SUCCESSIVE UNIFOR CLIMATES. (EUROPEAN STANDARD EN 43).
- NF T76-109:1993 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints.
- NF P75-208*NF EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
CZ-CSN, Humid heat aging conditions
- CSN 62 1528-1976 Ageing tests of rubber in atmoapheric condi- tiona
- CSN 62 1528-1979 Rubber. Ageing tests in atmospheric conditions
- CSN 35 4055 Cast.26-1984 Electromechanical components for electronic equipment. Durability of contact retention system and seals /maintenance, ageing/ test
British Standards Institution (BSI), Humid heat aging conditions
- BS 6388-3:1996 Accelerated ageing of paper and board. Method for moist heat treatment at 80°C and 65% relative humidity
- BS EN 14769:2012*BS 2000-535:2012 Bitumen and bituminous binders. Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
- BS EN 14769:2012 Bitumen and bituminous binders. Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
- BS EN 12697-45:2012 Bituminous mixtures. Test methods for hot mix asphalt. Saturation Ageing Tensile Stiffness (SATS) conditioning test
- BS EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- BS EN ISO 9142:2003 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- BS EN 12429:1998 Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions
- BS EN 1604:2013 Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions
- BS ISO 10468:2018 Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the ring creep properties under wet or dry conditions
- PD IEC TR 61244-4:2019 Determination of long-term radiation ageing in polymers. Effects of different temperatures and dose rates under radiation condition
- BS EN 1604:1996 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
- BS ISO 29472:2008+A1:2014 Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions
- BS EN ISO 11092:2014 Textiles. Physiological effects. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
国家市场监督管理总局、中国国家标准化管理委员会, Humid heat aging conditions
- GB/T 41415-2022 Textiles—Determination of dimensional change in dry heat or damp heat conditions
- GB/T 39548-2020 Determination of retention rate on thermal resistance of vacuum insulation panels(VIP) in hygrothermal conditions
TR-TSE, Humid heat aging conditions
- TS 3376-1979 MACHINE — MADE TEXTILE FLOOR COVERINGS — DETERMINATION OF DIMENSIONAL CHANGES IN VARYING MOISTURE CONDITIONS
International Organization for Standardization (ISO), Humid heat aging conditions
- ISO 5630-2:1985 Paper and board — Accelerated ageing — Part 2: Moist heat treatment at 90 degrees C and 25 % relative humidity
- ISO 5630-3:1996 Paper and board - Accelerated ageing - Part 3: Moist heat treatment at 80 °C and 65 % relative humidity
- ISO 9142:2003 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- ISO 9142:1990 Adhesives; guide to the selection of standard laboratory ageing conditions for testing bonded joints
- ISO 24353:2008/Amd 1:2021 Hygrothermal performance of building materials and products — Determination of moisture adsorption/desorption properties in response to humidity variation — Amendment 1
- ISO/FDIS 18393-1:2023 Thermal insulation products — Determination of ageing by settlement — Part 1: Blown loose fill insulation for ventilated attics simulating humidity and temperature cycling
- ISO/DIS 18393-1 Thermal insulation products — Determination of ageing by settlement — Part 1: Blown loose fill insulation for ventilated attics simulating humidity and temperature cycling
- ISO 5630-5:2008 Paper and board - Accelerated ageing - Part 5: Exposure to elevated temperature at 100 degrees C
- ISO 5630-6:2009 Paper and board - Accelerated ageing - Part 6: Exposure to atmospheric pollution (nitrogen dioxide)
- ISO 9142:1990/Cor 1:1995 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints; Technical Corrigendum 1
- ISO 10468:2003/Amd 1:2010 Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor — Amendment 1
- ISO/PRF 10468:2023 Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
- ISO 10468:2023 Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
- ISO 10468:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor
- ISO 10468:2018 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions
- ISO 29472:2008 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
- ISO 29472:2008/Amd 1:2014 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions; Amendment 1
- ISO 14828:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor
Japanese Industrial Standards Committee (JISC), Humid heat aging conditions
- JIS P 8154-3:2008 Paper and board -- Accelerated ageing -- Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity
- JIS C 2143-4-2:2014 Electrical insulating materials -- Thermal endurance properties -- Part 4-2: Ageing ovens -- Precision ovens for use up to 300 degree C
- JIS K 6877:2010 Adhesives-Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- JIS P 8220-2:2012 Pulps -- Laboratory wet disintegration -- Part 2: Disintegration of mechanical pulps at 20 degree C
KR-KS, Humid heat aging conditions
- KS M ISO 5630-3-2017 Paper and board－Accelerated ageing－Part 3：Moist heat treatment at 80 ℃ and 65 % relative humidity
- KS M ISO 14828-2016 Glass-reinforced thermosetting plastics (GRP) pipes－ Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor
German Institute for Standardization, Humid heat aging conditions
- DIN ISO 5630-3:1997 Paper and board - Accelerated ageing - Part 3: Moist heat treatment at 80 °C and 65 % relative humidity (ISO 5630-3:1996)
- DIN ISO 5630-3:1997-06 Paper and board - Accelerated ageing - Part 3: Moist heat treatment at 80 °C and 65 % relative humidity (ISO 5630-3:1996)
- DIN EN 12429:1998 Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions; German version EN 12429:1998
- DIN EN 12429:1998-08 Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions; German version EN 12429:1998
- DIN EN ISO 9142:2004-05 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003); German version EN ISO 9142:2003
- DIN EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003); German version EN ISO 9142:2003
- DIN EN 1604:2013-05 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions; German version EN 1604:2013
- DIN ISO 5630-6:2017 Paper and board - Accelerated ageing - Part 6: Exposure to atmospheric pollution (nitrogen dioxide) (ISO 5630-6:2009)
- DIN ISO 5630-5:2017 Paper and board - Accelerated ageing - Part 5: Exposure to elevated temperature at 100 °C (ISO 5630-5:2008)
- DIN EN ISO 18393-1:2022-06 Thermal insulation products - Determination of ageing by settlement - Part 1: Blown loose fill insulation for ventilated attics simulating humidity and temperature cycling (ISO/DIS 18393-1:2022); German and English version prEN ISO 18393-1:2022 / Note:...
- DIN EN 12697-45:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test; German version EN 12697-45:2012
AENOR, Humid heat aging conditions
- UNE 57092-4:2002 Paper and board. Accelerated ageing. Part 4: Moist heat treatment at 80 oC and 65% relative humidity.
- UNE-EN 1294:2000 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
- UNE 40377:1982 MACHINE-MADE TEXTILE FLOOR COVERINGS. DETERMINATION OF DIMENSIONAL CHANGES IN VARYING MOISTURE CONDITIONS
- UNE 53952:2006 IN Plastics. Flexible foams of polyurethane (PUR). Hardness variation by humidity and temperature conditions.
- UNE-EN 12429:1999 THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. CONDITIONING TO MOISTURE EQUILIBRIUM UNDER SPECIFIED TEMPERATURE AND HUMIDITY CONDITIONS.
- UNE-EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
Society of Automotive Engineers (SAE), Humid heat aging conditions
- SAE AMS6930B-2011 Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 4.0V Solution Heat Treated and Aged
- SAE AMS6935A-2011 Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 6.0V 2.0Sn Solution Heat Treated and Aged
- SAE AMS6926A-2011 Titanium Alloy Bars, Forgings and Forging Stock 13V 11Cr 3Al Solution Heat Treated and Aged
- SAE AMS4904B-2011 Titanium Alloy Sheet, Strip, and Plate 6Al 4V Solution Heat Treated and Aged
- SAE AMS4107F-2005 Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged UNS A97050
- SAE AMS4934D-2002 Titanium Alloy, Extrusions and Flash Welded Rings, 6Al 4V, Solution Heat Treated and Aged
- SAE AMS4242B-2007 Aluminum Alloy, Castings 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7) Solution Heat Treated and Overaged
- SAE AMS4236A-1987 Aluminum Alloy, Castings 4.6Cu 0.35Mn 0.25Mg 0.22Ti (A206.0-T4) Solution Heat Treated and Naturally Aged
- SAE AMS6532E-2011 Steel, Bars and Forgings 3.1Cr 11.5Ni 13.5Co 1.2Mo (0.21 - 0.25C) Vacuum Melted, Normalized and Overaged Precipitation Hardenable
- SAE AMS4342D-2000 Aluminum Alloy, Extrusions 6.2Zn 2.3Cu 2.2Mg 0.12Zr (7050-T74511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged
- SAE AMS5917-2011 Metal Injection Molded Nickel Based Alloy 718 Parts Hot Isostatically Pressed, Solution and Aged
- SAE AMS4437E-2003 Magnesium Alloy Castings, Sand 8.7Al - 0.70Zn (AZ91C-T6) Solution Heat Treated and Aged UNS M11914
- SAE AMS4161G-2002 Aluminum Alloy, Extrusions 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
- SAE AMS4223D-2007 Aluminum Alloy, Castings 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged
- SAE AMS4965J-2007 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Solution Heat Treated and Aged
- SAE AMS4280J-2008 Aluminum Alloy Castings, Permanent Mold, 5.0Si 1.2Cu 0.5Mg (355.0-T71) Solution Heat Treated and Overaged
- SAE AMS4237A-1987 Aluminum Alloy, Castings, Sand, 4.6Cu 0.35Mn 0.25Mg 0.22Ti (206.0-T71), Solution Heat Treated and Naturally Aged
- SAE AMS6930C-2011 Titanium Alloy Bars, Forgings and Forging Stock 6.0Al 4.0V Solution Heat Treated and Aged
- SAE AMS4965H-2002 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Solution Heat Treated and Aged
- SAE AMS4226A-1974 Aluminum Alloy Castings, High Strength, 5.0Cu 0.35Mn 0.18Zr 0.10V, (224.0) Solution and Precipitation Heat Treated (Overaged)
- SAE AMS4965K-2011 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Solution Heat Treated and Aged
- SAE AMS4965L-2014 Titanium Alloy, Bars, Wire, Forgings, and Rings, 6.0AI - 4.0V, Solution Heat Treated and Aged
Professional Standard - Textile, Humid heat aging conditions
- FZ/T 01029-1993 Determination of thermal resistance and moisture resistance of textiles under steady state conditions
工业和信息化部, Humid heat aging conditions
- QB/T 5250-2018 Leather color fastness test: color changes under accelerated aging conditions
RU-GOST R, Humid heat aging conditions
- GOST 9.067-1976 Unified system of corrosion and ageing protection. Vulcanized rubbers for articles operating under conditions of thermal and lightozone ageing. Techical requirements
- GOST 9.711-1985 Unified system of corrosion and ageing protection. Polimer materials for articles working in radiation ageing conditions. General requirements for selection
- GOST 10884-1994 Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
- GOST 10884-1981 Heat strengthened steel bars of periodical section for concrete reinforcement. Technical requirements
ES-AENOR, Humid heat aging conditions
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Humid heat aging conditions
- ASHRAE NA-04-8-4-2004 Predicting Indoor Temperature and Humidity Conditions Including Hygrothermal Interactions with the Building Envelope
Korean Agency for Technology and Standards (KATS), Humid heat aging conditions
- KS C IEC 62005-2:2002 Reliability of fiber optic interconnecting devices and passive components－Part 2：Quantitative assessment of reliability based on accelerated ageing test－Temperature and humidity, steady state
- KS M ISO 14828:2012 Glass-reinforced thermosetting plastics (GRP) pipes- Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor
- KS M ISO 14828:2016 Glass-reinforced thermosetting plastics (GRP) pipes－ Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor
- KS M ISO 5630-5:2011 Paper and board-Accelerated ageing-Part 5:Exposure to elevated temperature at 100 ℃
- KS M ISO 5630-6:2011 Paper and board-Accelerated ageing-Part 6:Exposure to atmospheric pollution(nitrogen dioxide)
- KS M ISO 9142:2012 Adhesives－Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- KS M ISO 9142-2012(2022) Adhesives－Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- KS M ISO 9142-2012(2017) Adhesives－Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- KS M ISO 10468:2004 Glass-reinforced thermosetting plastics(GRP) pipes-Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor
- KS M ISO 14828-2016(2021) Glass-reinforced thermosetting plastics (GRP) pipes－ Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor
- KS C IEC 62005-2-2002(2017) Reliability of fiber optic interconnecting devices and passive components－Part 2：Quantitative assessment of reliability based on accelerated ageing test－Temperature and humidity, steady state
American National Standards Institute （ANSI), Humid heat aging conditions
- ANSI/ASTM E782:1995 Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode
- ANSI/ASTM D2383:2001 Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds under Humid Conditions (08.02)
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Humid heat aging conditions
- GB/T 12665-2017 Requirements of damp-heat testing of electrical machine for service in general environmental condition
- GB/T 33393-2016 Footwear—Test methods for whole shoes—Measurement of thermal and water-vapour resistance under steady-state conditions
- GB/T 11048-2018 Textiles－Physiological effects－Measurement of thermal and water-vapour resistance under steady-state conditions(sweating guarded-hotplate test)
YU-JUS, Humid heat aging conditions
- JUS C.A5.021-1977 Corrosion Testing. Testing ofmetals and metallic and other coatings in damp heat atmospheres
FI-SFS, Humid heat aging conditions
European Committee for Standardization (CEN), Humid heat aging conditions
- EN 12429:1998 Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions
- prEN 29142-1992 Adhesives; guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:1990)
- EN 43:1985 Methods of Testing Doors: Behaviour Under Humidity Variations of Door Leaves Placed in Successive Uniform Climates
- EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
- EN ISO 9142:2003 Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints Supersedes EN 29142: 1993; ISO 9142: 2003
(U.S.) Ford Automotive Standards, Humid heat aging conditions
RO-ASRO, Humid heat aging conditions
- STAS 9869/1-1974 RUBBEK THREADS Determination of rcsistance to accelerated ageing in non-stressed condition
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Humid heat aging conditions
- JEDEC JEP163-2015 Selection of Burn-In/Life Test Conditions and Critical Parameters for QML Microcircuits
HU-MSZT, Humid heat aging conditions
Danish Standards Foundation, Humid heat aging conditions
- DS/EN 1294:2000 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
- DS/EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- DS/EN 12429:1999 Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions
- DS/EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
Lithuanian Standards Office , Humid heat aging conditions
- LST EN 1294-2002 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
- LST EN 1604-2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
- LST EN 1604+AC-2003 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
- LST EN 12429-2000 Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions
- LST EN 1604+AC-2003/A1-2007 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
AT-ON, Humid heat aging conditions
- ONORM EN 29142-1993 Adhesives - Guide to the selection of Standard laboratory ageingconditionsfortesting bonded joints (ISO 9142:1990)
PL-PKN, Humid heat aging conditions
- PN C89211-1989 Thermoplastic pipes Determination change of length of pipes as result of heating
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Humid heat aging conditions
- ASHRAE 3964-1996 Simultaneous Heat and Moisture Transfer in Fiberglass Insulation with Transient Boundary Conditions
- ASHRAE AB-10-009-2010 Modeling the Hygrothermal Behavior of Field-Tested Walls Exposed to South Carolina Conditions
- ASHRAE NA-04-8-2-2004 Effect of Moisture on Hygrothermal and Energy Performance of a Building with Cellular Concrete Walls in Climatic Conditions of Poland
未注明发布机构, Humid heat aging conditions
- BS EN ISO 9142:2003(2007) Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- BS EN ISO 10468:2023 Glass - reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
CEN - European Committee for Standardization, Humid heat aging conditions
- EN 1604:1996 Thermal Insulating Products for Building Applications - Determination of Dimensional Stability under Specified Temperature and Humidity Conditions
IT-UNI, Humid heat aging conditions
BE-NBN, Humid heat aging conditions
Canadian General Standards Board （CGSB), Humid heat aging conditions
- CGSB 4.2 NO. 76-94-CAN/CGSB-1994 Textile Test Methods Machine-Made Textile Floor Coverings - Determination of Dimensional Changes Due to the Effects of Varied Water and Heat Conditions
GOSTR, Humid heat aging conditions
- GOST 34643-2020 Fiberglass-reinforced thermosetting plastic pipes and parts of pipelines. Method for determination long-term specific ring creep stiffness and wet creep factor under wet or dry conditions