ZH
RU
ES

Compared with the standard sample

Compared with the standard sample, Total:114 items.

In the international standard classification, Compared with the standard sample involves: Welding, brazing and soldering, Vacuum technology, Linear and angular measurements, Construction materials, Quality, Testing of metals, Geology. Meteorology. Hydrology, Water quality, Solar energy engineering, Measurement of force, weight and pressure, Structures of buildings, Nuclear energy engineering, Petroleum products in general, Surface treatment and coating, Standardization. General rules, Shipbuilding and marine structures in general, Non-ferrous metals, Analytical chemistry, Glass, Laboratory medicine, Fertilizers, Thermodynamics and temperature measurements, Rubber and plastics products, Radiation protection, Buildings, Products of the chemical industry, Paint ingredients, Metrology and measurement in general, Pipeline components and pipelines, Fuels, Earthworks. Excavations. Foundation construction. Underground works, Installations in buildings, Medical sciences and health care facilities in general, Road engineering.

Association of German Mechanical Engineers, Compared with the standard sample

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Compared with the standard sample

GB/T 34873-2017 Vacuum gauges—Calibration by direct comparison with a reference gauge
GB/T 34876-2017 Vacuum technology—Vacuum gauges—Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge

RO-ASRO, Compared with the standard sample

STAS 7948/6-1975 INORGANIC PIGMENTS Determination of colour by comparing with the colour standard sample

American Society for Testing and Materials (ASTM), Compared with the standard sample

ASTM A944-22 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM C1756-14 Standard Guide for Comparing Sealant Behavior to Reference Photographs
ASTM E3254-23 Standard Practice for Use of Color in the Visual Examination and Forensic Comparison of Soil Samples
ASTM D5490-93(2002) Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information
ASTM D5490-93(2014)e1 Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information
ASTM D5490-93(2008) Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information
ASTM E816-15(2023) Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
ASTM E816-05 Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
ASTM A944-05 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM A944-99 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM A944-99(2004) Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM A944-10 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM C1756-17 Standard Guide for Comparing Seal or Sealant Behavior to Reference Photographs
ASTM C1756-17a Standard Guide for Comparing Seal or Sealant Behavior to Reference Photographs
ASTM D3328-06 Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
ASTM E816-15 Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
ASTM D3328-06(2013) Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
ASTM D5009-02(2011) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-02(2017) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM E3002-15(2023) Standard Practice for Assessing the Comparative Efficacy of Products Used for the Decontamination of Chemical Warfare Agents (CWAs) on Skin
ASTM E2927-13 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
ASTM C50-00(2006) Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
ASTM C50-00 Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
ASTM E734-80(1999)e1 Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)
ASTM E734-80(2005) Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)
ASTM E3002-15 Standard Practice for Assessing the Comparative Efficacy of Products Used for the Decontamination of Chemical Warfare Agents (CWAs) on Skin
ASTM E2330-19 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
ASTM E2248-18 Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens
ASTM E207-00 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials By Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
ASTM E207-08 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
ASTM E2927-16 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
ASTM E2927-16e1 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
ASTM E1955-20 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM Reference Radiographs
ASTM F904-98(2008) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
ASTM E2156-04 Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings
ASTM E2156-01 Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings
ASTM E2156-04(2013) Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings
ASTM F2231-02(2019) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
ASTM D346/D346M-11 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM C1140/C1140M-11 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
ASTM D346/D346M-11(2019)e1 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM E401-70(1989)e1 Practice for Bonding Thin Spectrochemical Samples and Standards to a Greater Mass of Material
ASTM D4543-04 Standard Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances
ASTM D1188-07 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1188-07(2015) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1188-07e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1188/D1188M-22 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples
ASTM E207-21 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison With Reference Thermoelement of Similar EMF-Temperature Properties
ASTM D1188-96e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D1188-96(2002) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D1188-96(2002)e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D7229-06 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D7229-08 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor

AENOR, Compared with the standard sample

UNE 66054:1978 COMPARISON OF THE VARIANCE OR OF THE STANDARD DEVIATION OF A LOT WITH A GIVEN VALUE
UNE-CEN/TR 15106:2005 IN Fertilizers - Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography - Comparison of non-standardized Lucena method with EN 13368-2:2001

Association Francaise de Normalisation, Compared with the standard sample

NF X06-061:1987 Applications de la statistique - Comparaison d'une variance (d'un écart-type) à une valeur donnée
NF X06-063:1987 Applications de la statistique - Comparaison du rapport de deux variances - (deux écarts-types) à une valeur donnée.
NF G07-124:1991 Textiles. Testing fabrics. Observation method for checks requiring a visual assessment in comparison with standard ranges.
NF X10-525:1979
NF V37-023:1983
XP ISO/TS 7821:2005 Tabac et produits du tabac - Préparation et constitution d'échantillons identiques à partir d'un même lot pour la conduite d'essais comparatifs portant sur la qualité des méthodes d'essai
NF EN 61094-8:2013 Microphones de mesure - Partie 8 : méthodes pour la détermination de l'efficacité en champ libre par comparaison des microphones étalons de travail
NF A35-601:1993 Iron and steel products-Special unalloyed and alloyed steels for heat treatment -Comparison of the European, American and Japanese standardized grades
NF D36-123:1994 Household economy. Corrugated metallic flexible piping, other than flexible piping to standards NF D 36-121 and NF D 36-125, for the external connection of gas-fired appliances.

RU-GOST R, Compared with the standard sample

GOST 9378-1975 Surface roughness comparison specimens. Technical requirements
GOST 8.315-1997 State system for enshuring the uniformity of measurements. Certified reference materials of composition and properties of substances and materials. Basic principles
GOST 8.315-1991 State system for ensuring the uniformity of measuring. Reference materials. Basic principles, ways of development, certification, approval, registration and use
GOST 8.531-2002 State system for ensuring the uniformity of measurements. Reference materials of composition of solid and disperse materials. Ways of homogeneity assessment
GOST 8.531-1985 State system for ensuring the uniformity of measurements. Homogeneity of powdered certified reference materials of content. Measurement procedure

British Standards Institution (BSI), Compared with the standard sample

BS ISO 3567:2012 Vacuum gauges. Calibration by direct comparison with a reference gauge

Korean Agency for Technology and Standards (KATS), Compared with the standard sample

KS B 5544-2003 Metallic materials－Charpy pendulum impact test－Part 3：Preparation andcharacterization of Charpy V reference test pieces for verification of test machines

German Institute for Standardization, Compared with the standard sample

DIN 28418-1:1976 Vacuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vacuum gauge
DIN 28418-3:1980 Vacuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vacuum gauge, thermal conductivity gauges
DIN SPEC 86002:2011 Ships and marine technology - Comparison of copper alloys in accordance with DIN and DIN EN standards for pipeline equipment

International Organization for Standardization (ISO), Compared with the standard sample

ISO 4967:1979 Steel; Determination of content of non-metallic inclusions; Micrographic method using standard diagrams

International Electrotechnical Commission (IEC), Compared with the standard sample

IEC TR 61963:2005 Nuclear power plants - Main control room - Comparison of IEC 60964 to similar standards on control room design

US-FCR, Compared with the standard sample

FCR COE CRD-C 24-01-2001 Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforced Steel

AGMA - American Gear Manufacturers Association, Compared with the standard sample

2000FTM3-2000 Comparison of New Gear Metallurgy Documents@ ISO 6336-5 and AGMA 923 with Gear Rating Standards AGMA 2001 and 2003

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Compared with the standard sample

GB/T 15000.3-2023 Standard sample working guidelines part 3: Standard sample determination and homogeneity and stability evaluation
GB/T 2389-2006 Reactive dyes. Determination of relative content of hydrolised dye comparatively standard sample
GB/T 2389-2013 Reactive dyes.Determination of relative content of hydrolised dye comparatively standard sample
GB/T 2389-1980 Determination of relative content of hydrolyzed dye in reactive dyes and standards specimens

AASHTO - American Association of State Highway and Transportation Officials, Compared with the standard sample

T159-1988 Standard Specification for Comparing Concrete on the Basis of the Bond Developed with Reinforcing Steel (Nineteenth Edition; ASTM C234-87)
T 159-1988 Standard Method of Test for Comparing Concrete on the Basis of the Bond Developed with Reinforcing Steel (HM-22; Part IIA; ASTM Designation: C 234-87; (Discontinued))
T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
T 166-2005 Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2011 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens

International Telecommunication Union (ITU), Compared with the standard sample

ITU-R F.758-4 SPANISH-2005 Considerations in the development of criteria for sharing between the fixed service and other services Consideraciones relativas a la elaboraci髇 de criterios para la compartici髇 entre el servicio fijo y otros servicios

WRC - Welding Research Council, Compared with the standard sample

BULLETIN 434-1998 DESIGN AND INSERVICE MARGINS OF POWER PIPING SYSTEMS: A COMPARATIVE STUDY OF U. S.@ CANADIAN AND EUROPEAN CODES & STANDARDS

Danish Standards Foundation, Compared with the standard sample

DS/CEN/TR 15106:2006 Fertilizers - Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography - Comparison of non-standardized Lucena method with EN 13368-2:2001
DS/INF 139:2002 Comparative analysis of system standards of the health care sector - DS/EN ISO 9001:2000 versus Joint Commission International Accreditation Standards for Hospitals (JCIA-SH:2000 - Requirements for organizations aiming for compliance with the unique JCIA

European Committee for Standardization (CEN), Compared with the standard sample

CEN/TR 15106:2005 Fertilizers - Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography - Comparison of non-standardized Lucena method with EN 13368-2:2001

Professional Standard - Agriculture, Compared with the standard sample

CNAS-EL-25-2023 Instructions for filling in and expressing the scope of accreditation capabilities of reference material/standard sample producers

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Compared with the standard sample

ASHRAE CH-03-7-4-2003 Comparison Between Predicted Duct Effectiveness from Proposed ASHRAE Standard 152P and Measured Field Data for Residential Forced Air Cooling Systems

Professional Standard - Geology, Compared with the standard sample

DZ/T 0138-1994 Standardization review of geological instrument product drawings and design documents

中华人民共和国国家卫生和计划生育委员会, Compared with the standard sample

GB/T 11713-1989 Standard methods of analyzing low specific gamma radioactivity samples by semiconductor gamma spectrometers

CZ-CSN, Compared with the standard sample

CSN 01 2870-1963 Czechoslovak analytical standard sample for non-ferrous metals. Pure and cathode nickel

The American Road & Transportation Builders Association, Compared with the standard sample

AASHTO T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2016 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens

Standard Association of Australia （SAA）, Compared with the standard sample

AS 1289.5.8.9:1998(R2013)