ZH
RU
ES
high magnification microscope objective
high magnification microscope objective, Total:243 items.
In the international standard classification, high magnification microscope objective involves: Optical equipment, Screw threads, Fasteners, Optoelectronics. Laser equipment, Optics and optical measurements, Geology. Meteorology. Hydrology, Machine tool systems, Vocabularies, Analytical chemistry, Water quality, Products of the textile industry, Linear and angular measurements, Lubricants, industrial oils and related products, Testing of metals, Animal feeding stuffs, Thermodynamics and temperature measurements, Hydraulic fluids, Protection against crime, Insulating fluids, Surface treatment and coating, Products of the chemical industry, Microbiology, Aerospace fluid systems and components, Coals.
Japanese Industrial Standards Committee (JISC), high magnification microscope objective
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, high magnification microscope objective
- GB/T 2609-2015 Microscopes.Objectives
- GB/T 2609-2006 Microscope.Objectives
- GB/T 2609-1996 Microscope--Objectives
- GB 2609-1981 Object lens for microscopes series
- GB/T 2985-1999 Biological microscope
- GB/T 2985-2008 Biological microscope
- GB/T 19864.2-2005 Stereomicroscopes.Part 2:High performance microscopes
- GB/T 19864.2-2013 Stereomicroscopes.Part 2 : High performance microscopes
- GB/T 22056-2008 Microscopes-Marking of objectives and eyepieces
- GB/T 22055.2-2008 Microscopes-Screw threads for objectives and related nosepieces-Part 2:Screw thread type M25×0.75mm
- GB/T 22055.1-2008 Microscopes-Screw threads for objectives and related nosepieces-Part 1:Screw thread type RMS(4/5in×1/36in)
- GB/T 6462-2005 Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method
- GB/T 19267.6-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 6: Scanning electron microscopy
- GB/T 6462-1986 Metallic and oxide coatings--Measurement of coating thickness--Microscopical method
- GB/T 28044-2011 General guide of detection method for nanomaterial biological effect by transmission electron microscope (TEM)
British Standards Institution (BSI), high magnification microscope objective
- BS 7012-10.2:1997 Light microscopes - Minimum requirements for stereo microscopes - High performance microscopes
- BS ISO 19012-2:2010 Optics and photonics. Designation of microscope objectives. Chromatic correction
- BS ISO 19012-2:2013 Microscopes. Designation of microscope objectives. Chromatic correction
- BS ISO 8038:2013 Microscopes. Screw threads for objectives and related nosepieces
- BS ISO 19012-1:2013 Microscopes. Designation of microscope objectives. Flatness of field/Plan
- BS ISO 19012-3:2015 Microscopes. Designation of microscope objectives. Spectral transmittance
- BS ISO 8578:2012 Microscopes. Marking of objectives and eyepieces
- BS ISO 8039:2014 Tracked Changes. Microscopes. Values, tolerances and symbols for magnification
- BS ISO 21073:2019 Microscopes. Confocal microscopes. Optical data of fluorescence confocal microscopes for biological imaging
- BS 7012-15:1997 Light microscopes - Marking of objectives and eyepieces
- 18/30339977 DC BS ISO 21073. Microscopes. Confocal microscopes. Optical data of fluorescence confocal microscopes for biological imaging
- BS 7012-4.1:1998 Light microscopes - Specification for microscope objective and nosepiece screw threads - Screw thread type RMS (4/5 in x 1/36 in)
- 23/30444981 DC BS ISO 19012-4. Microscopes. Designation of microscope objectives - Part 4. Polarization characteristics
- BS ISO 11884-2:2007 Optics and photonics. Minimum requirements for stereomicroscopes. High performance microscopes
- BS EN 50353:2001 Insulating oil - Determination of fibre contamination by the counting method using a microscope
- BS ISO 5061:2002 Animal feeding stuffs - Determination of castor oil seed husks - Microscope method
- BS 7011 Sec.2.1:1989 Consumable accessories for light microscopes. Slides. Specification for dimensions and optical properties
- BS ISO 29301:2017 Microbeam analysis. Analytical electron microscopy. Methods for calibrating image magnification by using reference materials with periodic structures
- BS EN ISO 1463:2005 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
- BS EN ISO 1463:2021 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
- BS EN ISO 14880-2:2007 Optics and photonics - Microlens arrays - Test methods for wavefront aberrations
Korean Agency for Technology and Standards (KATS), high magnification microscope objective
CZ-CSN, high magnification microscope objective
- CSN 72 1084-1974 Methodics of pyrogenic microscopy of anorganic substances
- CSN 75 7711-1987 Water Quality Microscopical biological qualitative and quantitative analysis
- CSN 75 7712-1998 Water quality - Biological analysis - Determination of bioseston
American National Standards Institute （ANSI), high magnification microscope objective
American Society of Mechanical Engineers (ASME), high magnification microscope objective
Professional Standard - Machinery, high magnification microscope objective
机械工业部, high magnification microscope objective
American Society for Testing and Materials (ASTM), high magnification microscope objective
- ASTM E766-98(2003) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
- ASTM E766-98 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
- ASTM E210-63(2005) Standard Specification for Microscope Objective Thread
- ASTM E766-14 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
- ASTM E210-63(2010) Standard Specification for Microscope Objective Thread
- ASTM E1951-98 Standard Guide for Calibrating Reticles and Light Microscope Magnifications
- ASTM E1951-02 Standard Guide for Calibrating Reticles and Light Microscope Magnifications
- ASTM E1951-01 Standard Guide for Calibrating Reticles and Light Microscope Magnifications
- ASTM E1951-14(2019) Standard Guide for Calibrating Reticles and Light Microscope Magnifications
- ASTM E766-14(2019) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
- ASTM E766-14e1 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
- ASTM D1245-84(2003) Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM E2228-10 Standard Guide for Microscopic Examination of Textile Fibers
- ASTM E2382-04 Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
- ASTM D5770-02 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
- ASTM D5770-96 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
- ASTM D5770-02(2007) Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
- ASTM E2382-04(2012) Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
- ASTM D1245-84(1999) Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D1245-84(2007) Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D1245-17 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM E3060-16 Standard Guide for Subvisible Particle Measurement in Biopharmaceutical Manufacturing Using Dynamic (Flow) Imaging Microscopy
- ASTM E2530-06 Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps
- ASTM D1245-08 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D1245-11 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
International Organization for Standardization (ISO), high magnification microscope objective
- ISO 8038:2013 Microscopes.Screw threads for objectives and related nosepieces
- ISO 19012-2:2013 Microscopes - Designation of microscope objectives - Part 2: Chromatic correction
- ISO 21073:2019 Microscopes — Confocal microscopes — Optical data of fluorescence confocal microscopes for biological imaging
- ISO/DIS 19012-4 Microscopes — Designation of microscope objectives — Part 4: Polarization characteristics
- ISO 8578:2012 Microscopes - Marking of objectives and eyepieces
- ISO 19012-1:2011 Microscopes - Designation of microscope objectives - Part 1: Flatness of field/Plan
- ISO 19012-1:2013 Microscopes.Designation of microscope objectives .Part 1: Flatness of field/Plan
- ISO 19012-3:2015 Microscopes - Designation of microscope objectives - Part 3: Spectral transmittance
- ISO 8038:2011 Microscopes — Screw threads for objectives and related nosepieces
- ISO 8038:1985 Optics and optical instruments; Microscopes; Screw thread for objectives
- ISO 11884-2:2007 Optics and photonics - Minimum requirements for stereomicroscopes - Part 2: High performance microscopes
- ISO 8578:1997/Cor 1:2002 Optics and optical instruments - Microscopes - Marking of objectives and eyepieces; Technical Corrigendum 1
- ISO 8038-2:2001 Optics and optical instruments - Screw threads for microscope objectives and related nosepieces - Part 2: Screw thread type M25 x 0,75 mm
- ISO 19012-2:2009 Optics and photonics - Designation of microscope objectives - Part 2: Chromatic correction
- ISO 5061:2002 Animal feeding stuffs - Determination of castor oil seed husks - Microscope method
- ISO 14880-1:2001/Cor 1:2003 Microlens array - Part 1: Vocabulary; Technical Corrigendum 1
- ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
- ISO/FDIS 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
- ISO 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
- ISO 19012-1:2007 Optics and photonics - Designation of microscope objectives - Part 1: Flatness of field/Plan
- ISO 1463:1973 Title missing - Legacy paper document
- ISO 1463:1982 Metallic and oxide coatings; Measurement of coating thickness; Microscopical method
- ISO 1463:2003 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
Shanghai Provincial Standard of the People's Republic of China, high magnification microscope objective
- DB31/T 297-2003 Calibration method of magnification of scanning electron microscope
- DB31/T 315-2004 Calibration method of magnification of transmission electron microscope
RU-GOST R, high magnification microscope objective
- GOST 3469-1991 Mikroscopes. Screw threads for objectives. Dimensions
- GOST 11200-1975 Objectives and body-tubes of the microscopes. Attaching dimensions
国家市场监督管理总局、中国国家标准化管理委员会, high magnification microscope objective
- GB/T 22056-2018 Microscopes—Marking of objectives and eyepieces
- GB/T 35098-2018 Microbeam analysis—Transmission electron microscopy—Morphological identification method of plant viruses by transmission electron microscopy
Military Standards (MIL-STD), high magnification microscope objective
Group Standards of the People's Republic of China, high magnification microscope objective
National Metrological Verification Regulations of the People's Republic of China, high magnification microscope objective
Association Francaise de Normalisation, high magnification microscope objective
- NF S10-500*NF ISO 21073:2020 Microscopes - Confocal microscopes - Optical data of fluorescence confocal microscopes for biological imaging
- NF ISO 21073:2020 Microscopes - Microscopes confocaux - Données optiques des microscopes confocaux à fluorescence pour l'imagerie biologique
- NF S10-132-1:2005 Microlens array - Part 1 : vocabulary.
- NF A91-110:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method.
- NF A91-110*NF EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
- NF A91-110:1995 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method.
- NF T90-379*NF EN 15204:2006 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Uterm？hl technique)
- NF S10-132-2*NF EN ISO 14880-2:2007 Optics and photonics - Microlens arrays - Part 2 : test methods for wavefront aberrations
- NF EN 15204:2006 Qualité de l'eau - Norme guide pour le dénombrement du phytoplancton par microscopie inversée (méthode Utermöhl)
HU-MSZT, high magnification microscope objective
National Metrological Technical Specifications of the People's Republic of China, high magnification microscope objective
- JJF 1402-2013 Calibration Specification for Biological Microscopes
Professional Standard - Water Conservancy, high magnification microscope objective
Guangdong Provincial Standard of the People's Republic of China, high magnification microscope objective
Defense Logistics Agency, high magnification microscope objective
- DLA A-A-50207 A VALID NOTICE 3-2006 MICROSCOPE, OPTICAL: MONOCULAR, FIXED-FOCUS, POCKET-TYPE, BETWEEN 40X AND 60X MAGNIFICATION
- DLA A-A-50207 A VALID NOTICE 2-2001 MICROSCOPE, OPTICAL: MONOCULAR, FIXED-FOCUS, POCKET-TYPE, BETWEEN 40X AND 60X MAGNIFICATION
- DLA A-A-50207 A VALID NOTICE 1-1993 MICROSCOPE, OPTICAL: MONOCULAR, FIXED-FOCUS, POCKET-TYPE, BETWEEN 40X AND 60X MAGNIFICATION
- DLA A-A-50207 A-1988 MICROSCOPE, OPTICAL: MONOCULAR, FIXED-FOCUS, POCKET-TYPE, BETWEEN 40X AND 60X MAGNIFICATION
Professional Standard - Commodity Inspection, high magnification microscope objective
- SN/T 0297-1993 Rules for inspection of biologicalmicroscop for export
- SN/T 3129.2-2013 Rules for the inspection of optical instruments for import and export.Part 2:Biological microscopes
国家进出口商品检验局, high magnification microscope objective
- SN 0297-1993 "Export Biological Microscope Inspection Regulations"
KR-KS, high magnification microscope objective
- KS B ISO 8578-2016 Optics and optical instruments－Microscopes－Marking of objectives and eyepieces
- KS B ISO 19012-1-2016 Optics and photonics－Designation of microscope objectives－Part 1：Flatness of field/Plan
- KS B ISO 8038-2-2023 Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces — Part 2: Screw thread type M25 × 0.75 mm
PT-IPQ, high magnification microscope objective
- NP 452-1986 Microbiologie alimentaire. Laits. Examen microscopique du sédlment
IN-BIS, high magnification microscope objective
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, high magnification microscope objective
- GB/T 33834-2017 Microbeam analysis—Scanning electron microscopy—Scanning electron microscope analysis of biological specimens
- GB/T 34002-2017 Microbeam analysis—Analytical transmission electron microscopy—Methods for calibrating image magnification by using reference materials having periodic structures
Shanxi Provincial Standard of the People's Republic of China, high magnification microscope objective
- DB14/T 1965-2019 Technical Regulations for Microscopic Determination of Density of Woven Fabrics
SE-SIS, high magnification microscope objective
- SIS 11 11 11-1974 Methods for assessing the slag inclusion content in steel. Microscopic methods
RO-ASRO, high magnification microscope objective
Taiwan Provincial Standard of the People's Republic of China, high magnification microscope objective
- CNS 2910-2008 Microscopic testing method for non-metallic inclusions in steel
- CNS 2910-1986 Microscopic Testing Method for the Non-Metallic Inclusions in Steel
Danish Standards Foundation, high magnification microscope objective
- DS/ISO 5061:2002 Animal feeding stuffs - Determination of castor oil seed husks - Microscope method
- DS/ISO 1463:1983 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
- DS/EN 15204:2006 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermöhl technique)
农业农村部, high magnification microscope objective
- NY/T 3002-2016 Microscopy method for detection of animal-derived components in feed
Professional Standard - Construction Industry, high magnification microscope objective
- JG/T 70-1999 Microscope count method for solid particle filth in oil liquid
Professional Standard - Public Safety Standards, high magnification microscope objective
- GA/T 1659-2019 Forensic Science Cashmere Fiber Inspection Biomicroscopy
- GA/T 909-2010 Collecting and packaging method for trace evidence-Gunshot residue(SEM/EDS examination)
- GA/T 1936-2021 Forensic Science Chemical Fiber Evidence Cross Section Shape Examination Microscopy
Professional Standard - Environmental Protection, high magnification microscope objective
- HJ 1215-2021 Determination of water quality phytoplankton filter membrane-microscopic counting method
- HJ 1216-2021 Determination of water quality phytoplankton 0.1 ml counting frame-microscopic counting method
European Committee for Standardization (CEN), high magnification microscope objective
- EN ISO 14880-1:2019 Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO 14880-1:2019)
- EN ISO 14880-1:2005 Optics and photonics - Microlens array - Part 1: Vocabulary
- EN ISO 1463:1994 Metallic and Oxide Coatings - Measurement of Coating Thickness - Microscopical Method (ISO 1463 : 1982)
- EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
- EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
ZA-SANS, high magnification microscope objective
- SANS 144:1982 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
German Institute for Standardization, high magnification microscope objective
- DIN 58959-4:1997 Quality management in medical microbiology - Part 4: Requirements for investigations using light microscopes
- DIN EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003); German version EN ISO 1463:2004
- DIN 58943-32:1995 Medical microbiology - Diagnosis of tuberculosis - Part 32: Detection of mycobacteria by microscopic methods
- DIN ISO 8038-2:2006 Optics and optical instruments - Microscopes - Screw threads for objectives and related nosepieces - Part 2: Screw thread type M 25 x 0,75 mm (ISO 8038-2:2001);English version of DIN ISO 8038-2:2006
Society of Automotive Engineers (SAE), high magnification microscope objective
- SAE AS598-2012 Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems
未注明发布机构, high magnification microscope objective
- SAE AS598A-2081 Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems
SAE - SAE International, high magnification microscope objective
- SAE AS598A-2018 Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems
YU-JUS, high magnification microscope objective
- JUS C.A6.031-1990 Metal11c and oxid coatlngs. tteasurement of coatlng thickness. Hicroscopical method
PL-PKN, high magnification microscope objective
- PN C05551-1987 Water and waste water Determination of the phytoplankton ?uantity by using the inverted microscope
ES-UNE, high magnification microscope objective
- UNE-EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
GOSTR, high magnification microscope objective
- GOST R 57868-2017 Polymer composites. Identification of polymer layers and inclusions by infrared microscopy
AENOR, high magnification microscope objective
- UNE 32301:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MICROSCOPICALLY THE REFLECTANCE OF VITRINITE.
- UNE-EN ISO 1463:2005 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
Standard Association of Australia （SAA）, high magnification microscope objective
- AS 1766.3.10:1994 Food microbiology Method 3.10:Examination for specific products - Liquid milks - Direct microscopic count
Lithuanian Standards Office , high magnification microscope objective
- LST EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
- LST EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
- LST EN 15204-2007 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermöhl technique)
AT-ON, high magnification microscope objective
- OENORM EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
CH-SNV, high magnification microscope objective
- SN EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)