ZH
RU
ES

p3 laboratory pressure

p3 laboratory pressure, Total:497 items.

In the international standard classification, p3 laboratory pressure involves: Geology. Meteorology. Hydrology, Analytical chemistry, Measurement of force, weight and pressure, Electricity. Magnetism. Electrical and magnetic measurements, Elements of buildings, Aircraft and space vehicles in general, Graphical symbols, Accident and disaster control, Soil quality. Pedology, Quality, Earthworks. Excavations. Foundation construction. Underground works, Fluid power systems, Water quality, Paper products, Paper and board, Rubber, Power stations in general, Medical sciences and health care facilities in general, Wood, sawlogs and sawn timber, Equipment for the chemical industry, Laboratory medicine, Internal combustion engines for road vehicles, Diagnostic, maintenance and test equipment, Waxes, bituminous materials and other petroleum products, Test conditions and procedures in general, Construction materials, Ground service and maintenance equipment, Air quality, Refrigerating technology, Civil engineering in general, Metrology and measurement in general, Testing of metals, Tyres, Sterilization and disinfection, Radiation protection, Ventilators. Fans. Air-conditioners, Road engineering, Radiation measurements, Road vehicle systems, Electrical engineering in general, Sports equipment and facilities, General methods of tests and analysis for food products, Extraction and processing of petroleum and natural gas, Electrical and electronic testing, Acoustics and acoustic measurements, Company organization and management, Earth-moving machinery, Rubber and plastics products, Protection of and in buildings, Installations in buildings, Protection against crime, Vibrations, shock and vibration measurements, Pipeline components and pipelines, Audio, video and audiovisual engineering, Veterinary medicine, Farming and forestry, Fluid storage devices, Power transmission and distribution networks, Plastics, Protection against electric shock, Corrosion of metals, Surface treatment and coating.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., p3 laboratory pressure

ASHRAE 3713-1993 Dynamics of Laboratory Pressurization
ASHRAE TO-98-15-1-1998 Experimental Validation of Thermal and Pressure Models in a Laboratory Simulator
ASHRAE 51 INT 2-2000 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51 ERTA-2006 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51 INT 1-2000 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ASHRAE 51 ADD A-2001 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating

SE-SIS, p3 laboratory pressure

SIS SS 02 71 09-1989 Geotechnical tests — Compaction properties — Laboratory compaction
SIS SS 02 01 80-1987 General requirements for the technical competence of testing laboratories
SIS SMS 1643-1955
SIS SMS 1647-1955
SIS SMS 1645-1955

Professional Standard - Meteorology, p3 laboratory pressure

QX/T 220-2013 Technical requirements for metrology laboratory of atmospheric pressure

ES-AENOR, p3 laboratory pressure

UNE 43-344-1985
UNE 83-301-1991 Tests of concrete. Making and curing of specimens
UNE 100-213-1990
UNE 83-302-1984
UNE 53-131-1990

Association Francaise de Normalisation, p3 laboratory pressure

NF B35-701:1962 Laboratory glassware. Ionisation manometers.
NF E49-501:1976 Pneumatic fluid power systems. Cylinders. Measurement of friction forces. Laboratory method.
NF Q03-044:2009 Corrugating medium - Determination of the flat crush resistance after laboratory fluting.
NF Q03-044:2011 Corrugating medium - Determination of the flat crush resistance after laboratory flutin.
NF P28-104*NF EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure
NF S92-062*NF EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures
NF EN ISO 15189:2022 Laboratoires médicaux - Exigences concernant la qualité et la compétence
NF X06-510*NF ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
NF S92-060*NF EN ISO 15189:2012 Medical laboratories - Requirements for quality and competence
NF X50-061:2000 General requirements for the competence of testing and calibration laboratories.
NF EN 12155:2000 Façades rideaux - Détermination de l'étanchéité à l'eau - Essai de laboratoire sous pression statique
NF Q03-044-1*NF EN ISO 7263-1:2019 Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 1 : A-flute
NF Q03-044-2*NF EN ISO 7263-2:2019 Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 2 : B-flute
NF S92-060:2007 Medical laboratories - Particular requirements for quality and competence.
NF X50-061*NF EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories.
NF X50-061*NF EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
NF EN ISO/IEC 17025:2017 Exigences générales concernant la compétence des laboratoires d'étalonnages et d'essais
NF ISO 13528:2022 Méthodes statistiques utilisées dans les essais d'aptitude par comparaison interlaboratoires
NF P98-818-32/IN1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32 : laboratory compaction of bituminous mixtures by vibratory compactor.
NF P98-818-32:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32 : laboratory compaction of bituminous mixtures by vibratory compactor.
NF E58-048:2001 Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements.
NF E58-048*NF EN 13531+A1:2008 Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements
NF P28-105*NF EN 13050:2012 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
FD T54-336-1999 Decorative laminated sheets (HPL). Guide for the processing of HPL decorative laminated sheets for laboratory equipment.
FD T54-336:1999 Decorative laminated sheets (HPL). Guide for the processing of HPL decorative laminated sheets for laboratory equipment.
NF S31-050:1979 Acoustics. Measurement of the acoustic insulation of building and building components. Specifications relating to laboratories.
NF EN 17542-1:2022 Terrassements - Essais géotechniques en laboratoire - Partie 1 : Essai de dégradabilité
NF T30-087-2*NF EN ISO 9117-2:2010 Paints and varnishes - Drying tests - Part 2 : pressure test for stackability
NF EN 61094-2:2009 Électroacoustique - Microphones de mesure - Partie 2 : méthode primaire pour l'étalonnage en pression des microphones étalons de laboratoire par la méthode de réciprocité
NF EN 61094-2/A1:2022 Électroacoustique - Microphones de mesure - Partie 2 : méthode primaire pour l'étalonnage en pression des microphones étalons de laboratoire par la méthode de la réciprocité
NF U47-400:2014 Animal health analysis methods - Guide for the organisation of interlaboratory proficiency testing in animal health
NF EN ISO 22117:2019 Microbiologie de la chaîne alimentaire - Exigences spécifiques et recommandations relatives aux essais d'aptitude par comparaison interlaboratoires
NF T51-195-5:2006 Plastics - Methods of exposure to laboratory light sources - Part 5 : medium pressure mercury vapour lamp.

Indonesia Standards, p3 laboratory pressure

SNI 04-3584-1994 Electrical energy meters, Test room
SNI 03-3399-1994 Test method for tensile strength of wood in the laboratories
SNI 2815-2011 Cara uji tekan triaksial pada batu di laboratorium
SNI ISO 15189:2012 Medical laboratories - Requirements for quality and competence
SNI 03-3400-1994 Test method for friction strenght of wood in laboratories.
SNI 03-3960-1995 Test method for modulus of bending elasticity of wood in laboratories
SNI 03-6430.1-2000 Test methods for compressive strength of grouts for preplaced-aggregate concrete in the laboratory
SNI 03-3959-1995 Test method for bending strength of wood in laboratories
SNI ISO/IEC 17025:2008 General requirements for the competence of testing and calibration laboratories
SNI 2848-2008
SNI ISO 7263:2010 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
SNI 03-6798-2002 Procedure for test specimen production and treatment for compressive and tensile strength laboratory test of soil-cement

HU-MSZT, p3 laboratory pressure

British Standards Institution (BSI), p3 laboratory pressure

BS EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure
BS EN ISO 15189:2022 Medical laboratories. Requirements for quality and competence
BS DD ENV 13050:2001 Curtain walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
BS EN 13050:2011 Curtain Walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
BS 6460-1:1983 Accreditation of testing laboratories - Specification of the general requirements for the technical competence of testing laboratories
BS EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
BS EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
BS ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
BS 2646-5:1993 Autoclaves for sterilization in laboratories. Methods of test for function and performance
21/30386856 DC BS EN ISO 15189. Medical laboratories. Requirements for quality and competence
BS 2646-4:1991 Autoclaves for sterilization in laboratories - Guide to maintenance
BS ISO 16945:2014 Corrugating medium. Determination of the edge crush resistance after laboratory fluting
BS EN 12697-32:2003 Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
13/30288546 DC BS EN 12697-32. Bituminous mixtures. Test methods for hot mix asphalt. Part 32. Laboratory compaction of bituminous mixtures by vibratory compactor
BS EN 13531:2001 Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements
BS EN 13531:2001+A1:2008(2009)*BS 6912-25:2001 Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements
BS EN 13531+A1:2008 Earth-moving machinery. Tip-over protection structure (TOPS) for compact excavators. Laboratory tests and performance requirements
BS EN ISO 7263:2011 Corrugating medium. Determination of the flat crush resistance after laboratory fluting
BS EN ISO 17892-5:2017 Geotechnical investigation and testing. Laboratory testing of soil. Incremental loading oedometer test
DD ENV 13050-2001 Curtain walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
DD IEC/TS 61094-7:2006 Measurement microphones - Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones
BS EN ISO 17892-7:2018 Geotechnical investigation and testing. Laboratory testing of soil. Part 7: Unconfined compression test
BS EN ISO 17892-9:2018 Geotechnical investigation and testing. Laboratory testing of soil. Consolidated triaxial compression tests on water saturated soils
BS 2646-2:1990 Autoclaves for sterilization in laboratories - Guide to planning and installation
BS EN ISO 7263:2008 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
BS EN ISO 7263-2:2019 Corrugating medium. Determination of the flat crush resistance after laboratory fluting - B-flute
BS ISO 22987:2020 Ships and marine technology. Laboratory test method for skin friction of antifouling paints by rotating drum
BS EN ISO 7263-1:2019 Corrugating medium. Determination of the flat crush resistance after laboratory fluting - A-flute
BS EN 13286-2:2010 Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
BS EN 13286-2:2010(2012) Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
BS EN 13286-2:2004 Unbound and hydraulically bound mixtures - Test methods for the determination of the laboratory reference density and water content - Proctor compaction
BS EN 61094-2:2009+A1:2022 Electroacoustics. Measurement microphones - Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique

Military Standards (MIL-STD), p3 laboratory pressure

DOD A-A-54895-1993 SOUND CHAMBER AND CUFF, BLOOD PRESSURE
DOD A-A-51679-1987 SPATULA, LABORATORY (HARD RUBBER)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, p3 laboratory pressure

GB 26861-2011(英文版) Safety code of electric power industry—Part of high voltage laboratory
GB/T 27409-2010 Application of proficiency testing in the medical laboratory
GB/T 30098-2013 Laboratory magnetic driven autoclave
GB/T 15483.2-1999 Proficiency testing by interlaboratory comparisons--Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
GB/T 29479.2-2020 Mobile laboratory—Part 2: Competence requirements
GB/T 15481-2000 General requirements for the competence of testing and calibration laboratories
GB/T 22576-2008 Medical laboratories.Particular requirements for quality and competence
GB/T 27025-2008 General requirements for the competence of testing and calibration laboratories
GB/T 28043-2011 Statistical methods for use in proficiency testing by interlaboratory comparisons
GB/T 16510-2008 The requirements for the competence of a radiation processing dosimetry calibration laboratory
GB/T 16510-1996 The requirements for the competence of a radiation processing dosimetry calibration laboratory
GB 26861-2001(32开) Safety code ofelectric power industry—Part of high voltage laboratory
GB 26861-2001 Safety code ofelectric power industry—Part of high voltage laboratory
GB 26861-2011 Safety code of electric power indusrty.Part of high voltage laboratory
GB/T 15483.1-1999 Proficiency testing by interlaboratory comparisons--Part 1: Development and operation of proficiency testing schemes
GB 4793.4-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory process
GB/T 21919-2022 Laboratory medicine—Requirements for the competence of calibration laboratories using reference measurement procedures

German Institute for Standardization, p3 laboratory pressure

DIN 12001-1:1987 Safety markings in laboratories; pressure cylinders
DIN EN ISO 7263:2009 Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2008); English version of DIN EN ISO 7263:2009-05
DIN EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure; German version EN 12155:2000
DIN EN ISO 15189:2023-03 Medical laboratories - Requirements for quality and competence (ISO 15189:2022); German version EN ISO 15189:2022
DIN EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
DIN EN 12155:2000-10 Curtain walling - Watertightness - Laboratory test under static pressure; German version EN 12155:2000
DIN EN ISO 15195:2019-07 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018); German version EN ISO 15195:2019
DIN EN ISO 15189:2023 Medical laboratories - Requirements for quality and competence (ISO 15189:2022)
DIN EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005); German and English version EN ISO/IEC 17025:2005
DIN EN ISO/IEC 17025:2018-03 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017); German and English version EN ISO/IEC 17025:2017
DIN 50106:2016 Testing of metallic materials - Compression test at room temperature
DIN ISO 13528:2020-09 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN EN 12697-32:2017 Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor; German and English version prEN 12697-32:2017
DIN EN ISO 7263-1:2019 Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 1: A-flute (ISO 7263-1:2018)
DIN EN ISO 7263-2:2019 Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 2: B-flute (ISO 7263-2:2018)
DIN 38402-45:2014-06 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN EN ISO 7263-2:2018 Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 2: B-flute (ISO/DIS 7263-2:2017); German and English version prEN ISO 7263-2:2017
DIN EN ISO 7263-1:2018 Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 1: A-flute (ISO/DIS 7263-1:2017); German and English version prEN ISO 7263-1:2017
DIN EN 12697-32:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor (includes Amendment A1:2007); English version of DIN EN 12697-32:2007-11
DIN EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray; German version EN 13050:2011
DIN EN ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011); German version EN ISO 7263:2011
DIN EN ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017); German and English version EN ISO/IEC 17025:2017
DIN 45688:2005 Specific requirements for the competence of testing laboratories for noise and vibration in the field of immission control
DIN 45688:2014 Specific requirements for the competence of testing laboratories for noise and vibration in the field of immission control
DIN EN ISO 22117:2019-08 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019); German version EN ISO 22117:2019
DIN ISO/TS 17892-9:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils (ISO/TS 17892-9:2004); German version CEN ISO/TS 17892-9:2004
DIN ISO/TS 17892-5:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test (ISO/TS 17892-5:2004); German version CEN ISO/TS 17892-5:2004
DIN EN 13050:2011-09 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray; German version EN 13050:2011
DIN 50905-4:2018-03 Corrosion of metals - Corrosion testing - Part 4: Performance of chemical corrosion experiments without mechanical stresses in liquids in the laboratory
DIN 50905-4:1987 Corrosion of metals; corrosion testing; corrosion testing in liquids under laboratory conditions without mechanical stress
DIN EN 932-2:1999 Test for general properties of aggregates - Part 2: Methods for reducing laboratory samples; German version EN 932-2:1999

Korean Agency for Technology and Standards (KATS), p3 laboratory pressure

KS F 2312-2022 Test method for soil compaction in laboratory
KS F 2312-1986 Test method for soil compaction in laboratory
KS I ISO TS 20612:2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS A ISO/IEC GUIDE 43-1-2002(2012) Proficiency testing by interlaboratory comparisons－Part 1：Development and operation of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2-2002(2012) Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS P ISO 15189-2013(2019) Medical laboratories ─ Requirements for quality and competence
KS F 2866-2003(2018) Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it
KS P ISO 15189:2011 Medical laboratories-Particular requirements for quality and competence
KS P ISO 15189:2013 Medical laboratories ─ Requirements for quality and competence
KS Q ISO/IEC 17025:2006 General requirements for the competence of testing and calibration laboratories
KS Q ISO/IEC 17025:2019 General requirements for the competence of testing and calibration laboratories
KS Q ISO 13528-2017(2022) Statistical methods for use in proficiency testing by interlaboratory comparisons
KS F 2329-2007(2017) Testing method for making curing of soil－cement compression and flexure test specimens in the laboratory
KS F 2329-1982 Testing method for making curing of soil－cement compression and flexure test specimens in the laboratory
KS C IEC 61094-2:2003 Measurement microphones-Part 2:Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
KS F ISO 12117:2003 Earth-moving machinery-Tip-over protection structure(TOPS) for compact excavators-Laboratory tests and performance requirements
KS F 2329-2007 Testing method for making curing of soil－cement compression and flexure test specimens in the laboratory
KS F 2329-2007(2022) Testing method for making curing of soil－cement compression and flexure test specimens in the laboratory
KS B 6392-2013 Laboratory methods of testing air diffusers for aerodynamic performance
KS Q ISO 13528:2017 Statistical methods for use in proficiency testing by interlaboratory comparisons
KS C IEC 61094-2-2003(2008) Measurement microphones－Part 2：Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
KS P 2069-2020 Protocol for evaluation of detection capability for measurement procedures in in-vitro diagnostic medical laboratory
KS C IEC TS 61094-7:2017 Electroacoustics — Measurement microphones — Part 7: Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones

未注明发布机构, p3 laboratory pressure

GJB 15481-2001 General requirements for competence of testing and calibration laboratories
BS EN ISO/IEC 17025:2017(2018) General requirements for the competence of testing and calibration laboratories
GJB 150.21A-2009 Military equipment laboratory environmental test methods Part 21: Wind pressure test
DIN EN ISO 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)
GJB 150.2A-2009 Military equipment laboratory environmental test methods Part 2: Low pressure (altitude) test
BS 2646-4:1991(2011) Autoclaves for sterilization in laboratories — Part 4 : Guide to maintenance

中国国家认证认可监督管理委员会, p3 laboratory pressure

RB/T 183-2017 Laboratory proficiency testing system table
RB/T 184-2017 Laboratory proficiency testing technical requirements for phytosanitary
RB/T 210-2017 Technical requirements for laboratory proficiency testing in the field of animal quarantine

American Society for Testing and Materials (ASTM), p3 laboratory pressure

ASTM D1883-05 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-99 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-07e1 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-14 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D1883-07e2 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM C1222-19a Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1222-19 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM D2168-02 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D2168-02a Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D2168-90(1996)e1 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D216-77(1982) Standard test method for calibration of laboratory mechanical earth compactors
ASTM D5361/D5361M-11 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM D5361/D5361M-16(2022) Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
ASTM D5361/D5361M-16 Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
ASTM D5361/D5361M-14 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM D2168-10(2018) Standard Practices for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D698-00ae1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft³ (600 kN-m/m³))
ASTM D698-00a Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft³ (600 kN-m/m³))
ASTM D1883-21 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D1557-02 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³(2,700 kN-m/m³))
ASTM D1557-02e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³(2,700 kN-m/m³))
ASTM D1557-09 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³ (2,700 kN-m/m³))
ASTM D1557-12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³ (2,700 kN-m/m³))
ASTM D1883-16 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM ANS/ISO 17025-99 General requirements for the competence of testing and calibration laboratories
ASTM ANS/ISO 17025-05 General Requirements for the Competence of Testing and Calibration Laboratories
ASTM ANS/ISO17025-05 General Requirements for the Competence of Testing and Calibration Laboratories
ASTM ANS/ISO17025-99 General requirements for the competence of testing and calibration laboratories
ASTM D1557-00 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³(2,700 kN-m/m³))
ASTM D698-12(2021) Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft³ (600 kN-m/m³))
ASTM D698-12e2 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft³ (600 kN-m/m³))
ASTM D5361-06 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM D5361-00 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM D5361-05 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM D5361/D5361M-11a Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
ASTM D698-07e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft³ (600 kN-m/m³))
ASTM D698-07 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft³ (600 kN-m/m³))
ASTM D1557-07 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³ (2,700 kN-m/m³))
ASTM D698-12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12thinsp;400 ft-lbf/ft³thinsp;(600 kN-m/m³))
ASTM D698-12e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort 40;12 400 ft-lbf/ft³ 40;600 kN-m/m³41;41;
ASTM D2844-07 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
ASTM E1522-93(2003) Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware
ASTM D698-00 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft³ (600 kN-m/m³))
ASTM D1557-12e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³ (2,700 kN-m/m³))
ASTM D1557-12(2021) Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³ (2,700 kN-m/m³))
ASTM D7401-08 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
ASTM D1883-07 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM E1522-93(1997) Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware
ASTM E1522-93(2019) Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware
ASTM E2489-16 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM C1893-23 Standard Practice for Laboratory Performance Verification of Hydrodynamic Separators for the Treatment of Stormwater Runoff
ASTM D2844/D2844M-13 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
ASTM E2057-23 Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Violence Investigations
ASTM D2844/D2844M-18e1 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
ASTM D2844-01e1 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
ASTM D2844-01 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
ASTM D2844-94 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
ASTM C942-10 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C942/C942M-21 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM E2489-21 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM E671-98 Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
ASTM E671-98(2004) Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
ASTM D1632-07 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D1632-17e1 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D1632-17 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D7764-12 Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers
ASTM C942-99(2004) Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C942-99 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM E2930-13 Standard Practice for Pressure Decay Leak Test Method
ASTM E3331-22 Standard Test Method for Measuring Target Modulus Using the Light Weight Deflectometer on Laboratory Compaction Characteristic Samples
ASTM D4648/D4648M-10 Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
ASTM D4648/D4648M-13 Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
ASTM E1522-93(2008) Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware
ASTM D5179-16(2021) Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D2844-07e1 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
ASTM D7764-20 Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers

Professional Standard - Machinery, p3 laboratory pressure

JB/T 6821-1993 Terminology of laboratory high pressure kier
JB/T 7439.2-1994 Terminology relating to laboratory instruments - Dynamic test instrument

Standard Association of Australia （SAA）, p3 laboratory pressure

AS 2243.7:1991 Safety in laboratories - Electrical aspects
AS ISO 15189:2013
AS ISO 15189:2023 Medical laboratories — Requirements for quality and competence
AS ISO 15189:2009
AS ISO/IEC 17025:2005/Amdt 1:2006
AS ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories

KR-KS, p3 laboratory pressure

KS I ISO TS 20612-2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS Q ISO/IEC 17025-2019 General requirements for the competence of testing and calibration laboratories
KS Q ISO 13528-2017 Statistical methods for use in proficiency testing by interlaboratory comparisons
KS M ISO 7263-2014 Corrugating medium — Determination of the flat crush resistance after laboratory fluting
KS F 2329-2023 Method for preperation of soil cement compression and flexure test specimens in the laboratory
KS C IEC TS 61094-7-2017 Electroacoustics — Measurement microphones — Part 7: Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones

CEN - European Committee for Standardization, p3 laboratory pressure

EN ISO 7263:2008 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
EN ISO 17892-7:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test
PREN 12697-32-2017 Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
EN 13286-2-2010E Unbound and hydraulically bound mixtures - Part 2: Test methods for the determination of the laboratory reference density and water content - Proctor compaction
EN ISO 17892-11:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests
EN 12697-32:2019 Bituminous mixtures - Test methods - Part 32: Specimen preparation by vibratory compactor
EN 13286-2:2004 Unbound and hydraulically bound mixtures - Part 2: Test methods for the determination of the laboratory reference density and water content - Proctor compaction

International Organization for Standardization (ISO), p3 laboratory pressure

ISO 7263:2008 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
ISO 15195:2018 Laboratory medicine — Requirements for the competence of calibration laboratories using reference measurement procedures
ISO 17892-7:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 7: Unconfined compression test
ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
ISO/IEC GUIDE 25:1990 General requirements for the competence of calibration and testing laboratories
ISO/TS 17892-8:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test
ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
ISO/IEC 17025:1999 General requirements for the competence of testing and calibration laboratories
ISO 15189:2007 Medical laboratories - Particular requirements for quality and competence
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 15189:2022 Medical laboratories — Particular requirements for quality and competence
ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 10191:2021 Passenger car tyres — Verifying tyre capabilities — Laboratory test methods
ISO/TS 17892-9:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water-saturated soils
ISO 17892-11:2019 Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Permeability tests
ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
ISO 16945:2014 Corrugating medium - Determination of the edge crush resistance after laboratory fluting
ISO 7263:1994 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
ISO/IEC 17025:2005/Cor 1:2006 General requirements for the competence of testing and calibration laboratories; Technical Corrigendum 1
ISO 17892-5:2017 Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test

European Committee for Standardization (CEN), p3 laboratory pressure

EN ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure
EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
EN ISO/IEC 17025:2000 General Requirements for the Competence of Testing and Calibration Laboratories ISO/IEC 17025: 1999
EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
prEN ISO 15189:2021 Medical laboratories - Requirements for quality and competence (ISO/DIS 15189:2021)
EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)
DD ENV 13050-2000 Curtain Walling - Watertightness - Laboratory Test under Dynamic Condition of Air Pressure and Water Spray
EN ISO 7263:1995 Corrugating Medium - Determination of the Flat Crush Resistance After Laboratory Fluting (ISO 7263 : 1994)
EN 13286-2:2010 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction

RU-GOST R, p3 laboratory pressure

GOST 17245-1979 Soils. Method of laboratory determination of temporary resistance for single-exial compression
GOST R ISO 14066-2013 Greenhouse gases. Competence requirements for greenhouse gas validation teams and verification team
GOST 34259-2017 Soils. Method of laboratory determination of adhesion (stickiness)
GOST R 59596-2021 Soils. Method of laboratory determination of normal forces of frost heaving
GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
GOST R ISO 15189-2006 Medical laboratories. Particular requirements for quality and competence
GOST R ISO 15189-2015 Medical laboratories. Particular requirements for quality and competence
GOST R ISO/IEC 17025-2000 General requirements for the competence of testing and calibration laboratories
GOST R ISO/IEC 17025-2006 General requirements for the competence of testing and calibration laboratories
GOST R 50779.60-2017 Statistical methods for use in proficiency testing by interlaboratory comparison
GOST R 8.692-2009 State system for ensuring the uniformity of measurements. Requirements for the competence of providers of proficiency testing for test laboratories by interlaboratory comparisons
GOST 12248-2010 Soils. Laboratory methods for determining the strength and strain characteristics
GOST R 56726-2015 Soils. Laboratory method for determine the specific tangential forces of frost heaving
GOST 23625-2001 Measuring laboratory voltage transformers. General specifications
GOST 23625-1979 Measuring laboratory voltage transformers. General specifications
GOST R ISO 7263-2011 Corrugating medium. Method for determination of the flat crush resistance after laboratory fluting
GOST R 54476-2011 Soils. Methods of laboratory determination of characteristics of shear resistance of soils in road construction
GOST R 54476-2011(2019) Soils. Methods of laboratory determination of characteristics of shear resistance of soils in road construction

Professional Standard - Electricity, p3 laboratory pressure

DL/T 1082-2008 Technical requirement of high voltage laboratory
DL/T 520-2007 Technical guidance for coal analytical laboratory in power plant
DL/T 5004-2004 Design standard of I&C laboratory for fossil power plant
DL/T 5004-2004（条文说明） Design standard of I&C laboratory for fossil power plant(explanation)

Sichuan Provincial Standard of the People's Republic of China, p3 laboratory pressure

DB51/T 1202-2011 Specifications for proficiency testing of agricultural product inspection laboratories
DB51/T 2161-2016 Laboratory Human Resource Management Guide

Danish Standards Foundation, p3 laboratory pressure

DS/EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure
DS/EN ISO 15189:2013 Medical laboratories - Requirements for quality and competence
DS/EN ISO 15189:2008 Medical laboratories - Particular requirements for quality and competence
DS/EN ISO/IEC 17025/AC:2006 General requirements for the competence of testing and calibration laboratories
DS/EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
DS/ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
DS/EN ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
DS/EN 13286-2:2011 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
DS/EN 13286-2/AC:2013 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
DS/EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
DS/EN 12697-32+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor

Lithuanian Standards Office , p3 laboratory pressure

LST EN 12155-2002 Curtain walling - Watertightness - Laboratory test under static pressure
LST EN ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011)
LST EN ISO 15189:2013 Medical laboratories - Requirements for quality and competence (ISO 15189:2012)
LST EN 13286-2-2010 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
LST EN 13286-2-2010/AC-2013 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
LST EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)
LST EN 13050-2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
LST EN 12697-32+A1-2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
LST EN ISO/IEC 17025:2005/AC:2006 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005/Cor.1:2006)

Professional Standard - Commodity Inspection, p3 laboratory pressure

SN/T 2723.1-2010 Laboratory proficiency testing.Part 1:General principles
SN/T 2966-2011 Proficiency testing regulations for plant quarantine
SN/T 2723.2-2010 Laboratory proficiency testing.Part 2:Terms and glossary
SN/T 2723.3-2010 Laboratory proficiency testing.Part 3: Format and content of proficiency testing report
SN/T 3092-2012 Code for validation of the ability of lab replying to public safety affairs
SN/T 2989-2011 Protocol on proficiency testing of entry-exit animal quarantine laboratories
SN/T 3782-2014 Rules for laboratory proficiency testing specification of manufacturing/marketing enterprises on import and export textiles

Taiwan Provincial Standard of the People's Republic of China, p3 laboratory pressure

CNS 15009-2006 Proficiency testing by interlaboratory comparisons
CNS 13125-1992 Development and Operation of Laboratory Proficiency Testing
CNS 17025-2007 General requirements for the competence of testing and calibration laboratories
CNS 17025-2001 General requirements for the competence of testing and calibration laboratories
CNS 12383-2006 Method of test for resistance R-value and expansion pressure of compacted soils
CNS 12383-1988 Method of Test for Expansion Pressure and Resistance `7T`6w Value of Compacted Soils

CZ-CSN, p3 laboratory pressure

CSN 25 7869-1967 Wet gas meters for working pressure up to 120 kp/m2 for laboratory use
CSN 08 5011 Z2
CSN ISO 7140:1993 Cross-country skis. Determination of dynamic performance. Laboratory measurement method
CSN 72 1025-1992 Laboratory determination of unconfined compressive strenght of cohesive soils
CSN 72 1027-1983 Laboratory determination of soil compressibility in the oedometer apparatus
CSN 30 3642-1983 Hydraulic telescopic shock absorbes for road vehicles Methods of laboratory testing

AENOR, p3 laboratory pressure

UNE-EN ISO 7263:2011 Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011)
UNE-EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure.
UNE-EN 13286-2:2011 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
UNE-EN ISO/IEC 17025:2005 Conformity assessment. General requirements for the competence of testing and calibration laboratories
UNE-EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017)
UNE-EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
UNE-ISO 16945:2015 Corrugating medium. Determination of the edge crush resistance after laboratory fluting
UNE-EN 12697-32:2003+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
UNE-EN ISO 15189:2013 Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15)

VN-TCVN, p3 laboratory pressure

TCVN 4201-2012 Soils.Laboratory methods for determination of compaction characteristics
TCVN 4200-2012 Soils.Laboratory methods for determination of compressibility
TCVN 7782-2008 Medical laboratories.Particular requirements for quality and competence
TCVN 7155-2002 Laboratory glassware.Thermal shock and thermal shock endurance.Test methods
TCVN 6897-2010 Corrugating medium.Determination of the flat crush resistance after laboratory fluting

ES-UNE, p3 laboratory pressure

UNE-EN ISO 15189:2023 Medical laboratories - Requirements for quality and competence (ISO 15189:2022)
UNE-EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
UNE-EN ISO 22117:2020 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019)

Heilongjiang Provincial Standard of the People's Republic of China, p3 laboratory pressure

DB23/T 3598-2023 Hemp Inspection and Testing Laboratory Personnel Competency Requirements

BR-ABNT, p3 laboratory pressure

ABNT NBR ISO 7263:2012 Role-core - Determination of crush resistance after being curled in the laboratory

American National Standards Institute （ANSI), p3 laboratory pressure

ANSI/ASTM E1224:1996 Guide for Categorizing Fields of Capability for Laboratory Accreditation Purposes
ANSI/AMCA 240-2015 Laboratory Methods of Testing Positive Pressure Ventilators for Aerodynamic Performance Rating
ANSI/ASTM/ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories
ANSI/ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories
ANSI/AMCA 240-1996 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/AMCA 240-2006 Laboratory Method of Testing Positive Pressure Ventilators for Rating
ANSI/ASHRAE 51-2001 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
ANSI/ASA S3.1-1999 Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms
ANSI/AMCA 220-2021 Laboratory Methods of Testing Air Curtain Units for Aerodynamic Performance Rating
ANSI/ASTM E2489:2016 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ANSI/AMCA 220-2005 Laboratory Methods of Testing Air Curtain Units for Aerodynamic Performance Rating
ANSI/ASTM F2634:2010 TEST METHOD FOR LABORATORY TESTING OF POLYETHYLENE (PE) BUTT FUSION JOINTS USING TENSILE-IMPACT METHOD
ANSI S1.15 Part 2-2005 Measurement Microphones - Part 2: Primary Method for Pressue Calibration of Laboratory Standard Microphones by the Reciprocity Technique

Society of Automotive Engineers (SAE), p3 laboratory pressure

SAE J1597-2008 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability
SAE J1597-1994 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability
SAE J1597-1999 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability
SAE J1106-2012 Laboratory Testing Machines for Measuring the Steady State Force and Moment Properties of Passenger Car Tires
SAE J1106-1975 Laboratory Testing Machines for Measuring the Steady State Force and Moment Properties of Passenger Car Tires, Recommended Practice January 1975
SAE J1107-2012 Laboratory Testing Machines and Procedures for Measuring the steady state Force and Moment Properties of Passenger Car Tires
SAE J1107-1975 Laboratory Testing Machines for Measuring the Steady State Force and Moment Properties of Passenger Car Tires, Information Report January 1975

SAE - SAE International, p3 laboratory pressure

SAE J1597-1988 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure Cycle Durability
SAE J1597-2016 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure-Cycle Durability
SAE J1597-2021 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Pressure Cycle Durability

TH-TISI, p3 laboratory pressure

TIS 5043.2-1997 Proficiency testing by interlaboratory comparisons.part 2: selection and use of proficiency testing schemes by laboratory accreditation bodies
TIS 5043.1-1997 Proficiency testing by interlaboratory comparisons.part 1: development and operation of proficiency testing schemes
TIS 2154-2004 Medical laboratories.particular requirements for quality and competence
TIS 17025-2005 General requirements for the competence of testing and calibration laboratories
TIS 1300-1994 General requirements for teh competence of calibration and testing laboratories

BELST, p3 laboratory pressure

STB 941.3-93 System of accreditation of verification ant testing laboratory of Belarus. General requirements for estimation of technical competence verification and testing laboratory

Professional Standard - Civil Aviation, p3 laboratory pressure

MH/T 6096-2013 Proficiency testing procedures for commercial aviation oil testing laboratory

NO-SN, p3 laboratory pressure

NS 8016-1988 Geotechnical testing - Laboratory methods - Determination of undrained shear strength by unconfined pressure testing

Military Standard of the People's Republic of China-General Armament Department, p3 laboratory pressure

GJB 165.3-1986 Fuze laboratory test Fuze delay tube ignition capability test
GJB 165.3A-2004 Fuze Laboratory Test Part 3: Fuze Delay Barrel Ignition Capability Test
GJB 165.3A-2019 Fuze Laboratory Test Part 3: Fuze Delay Barrel Ignition Capability Test

CU-NC, p3 laboratory pressure

NC 53-44-1988 Construction Designs. Industrial Electric Laboratories Design Specifications

American Society of Quality Control （ASQC), p3 laboratory pressure

ASQ 17025-1999 General requirements for the competence of testing and calibration laboratories T17025E
ASQ 17025-2005 General requirements for the competence of testing and calibration laboratories T804

International Electrotechnical Commission (IEC), p3 laboratory pressure

ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
IEC 61094-2:1992 Measurement microphones; part 2: primary method for pressure calibration of laboratory standard microphones by the reciprocity technique

Group Standards of the People's Republic of China, p3 laboratory pressure

T/GDWCA 0086-2022 Laboratory?capability?evaluation?specifications for?the?wire?and?cable?industry
T/LNIQA 006-2022 Competence evaluation?specifications for food safety rapid testing laboratories
T/HWMIA 02-2022 Construction and management of autoclaved aerated concrete enterprise laboratory
T/CAS 651-2022 Guidelines for hiring, competency development and assessment supervision of Inspection and testinglaboratory personnel
T/CNMIA 0039-2023 Private Laboratory of Molecular Pathology Performance Capability Evaluation
T/CASEI 010-2022 Guidelines for supervision and inspection of pressure pipeline component manufacture
T/SZUAVIA 009.3-2019 Laboratory environmental test methods for unmanned aircraft systems with multi-rotors Part 3: Low pressure test
T/CASEI 009-2022 Guidelines for supervision and inspection of pressure pipeline construction —Utility pipeline
T/CASEI 008-2022 Guidelines for supervision and inspection of pressure pipeline construction—long-distance pipeline
T/CASEI 007-2022 Guidelines for supervision and inspection of pressure pipeline construction—industrial pipeline

NZ-SNZ, p3 laboratory pressure

NZS/ISO 15189:2007 Medical Laboratories - Particular Requirements for Quality and Competence
NZS ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (ISO/IEC 17025:2005)

GOSTR, p3 laboratory pressure

GOST ISO/IEC 17025-2019 General requirements for the competence of testing and calibration laboratories
GOST 34276-2017 Soils. Methods of laboratory determination of the specific resistance to penetration

ZA-SANS, p3 laboratory pressure

SANS 15189:2009 Medical laboratories - Particular requirements for quality and competence
SANS 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons
SANS 10227:2007 Criteria for the operation of inspection authorities performing inspection in terms of the Pressure Equipment Regulations
SANS 61094-2:2009 Electroacoustics - Measurement microphones Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique

国家市场监督管理总局、中国国家标准化管理委员会, p3 laboratory pressure

GB/T 27025-2019 General requirements for the competence of testing and calibration laboratories
GB/T 28043-2019 Statistical methods for use in proficiency testing by interlaboratory comparison
GB/T 40168-2021 Corrugating medium—Determination of the edge crush resistance after laboratory fluting
GB/T 22576.1-2018 Medical laboratories—Requirements for quality and competence—Part 1: General requirements
GB/T 22576.3-2021 Medical laboratories—Requirements for quality and competence—Part 3: Requirements in the field of urine examination

国家质量监督检验检疫总局, p3 laboratory pressure

SN/T 4754-2017 Technical requirements for chemical testing proficiency verification in entry-exit laboratories
SN/T 4610-2016 Requirements for building testing capacity of health and quarantine laboratories for entry-exit special items

Professional Standard - Geology, p3 laboratory pressure

DZ/T 0111-1994 Laboratory Gravity Type 300 Microtome Specifications

Professional Standard - Nuclear Industry, p3 laboratory pressure

EJ/T 20037-2014 Laboratory competency requirements for radioactivity determination of biological samples

American Welding Society (AWS), p3 laboratory pressure

WRC 089:1963(1977) Experimental Investigation Of Stresses In Nozzles In Cylindrical Pressure Vessels
WRC 337:1988 Experimental Validation of the Evaluation of Reinforced Openings in Large Steel Pressure Vessels

国家市场监督管理总局, p3 laboratory pressure

RB/T 055-2020 Competence Guidelines for Conformity Assessment Service Characteristics Assessment Laboratories

The American Road & Transportation Builders Association, p3 laboratory pressure

AASHTO T 190-2002 Standard Method of Test for Resistance R-Value and Expansion Pressure of Compacted Soils
AASHTO TP 93-2011 Standard Method of Test for Determining Formwork Pressure of Fresh Self-Consolidating Concrete Using Pressure Transducers

American Society of Mechanical Engineers (ASME), p3 laboratory pressure

ASME 2397-2001 Pressure Relief Valves That Exceed the Capability of Testing Laboratories Sections I and VIII, Division 1 SUPP 8&9

WRC - Welding Research Council, p3 laboratory pressure

BULLETIN 89-1963 EXPERIMENTAL INVESTIGATION OF STRESSES IN NOZZLES IN CYLINDRICAL PRESSURE VESSELS
BULLETIN 119-1967 INTERPRETIVE REPORT ON PRESSURE VESSEL HEADS; INTERPRETATIONS OF EXPERIMENTAL DATA ON PRESSURE VESSEL HEADS CONVEX TO PRESSURE
BULLETIN 337-1988 EXPERIMENTAL VALIDATION OF THE EVALUATION OF REINFORCED OPENINGS IN LARGE STEEL PRESSURE VESSELS

BE-NBN, p3 laboratory pressure

NBN B 16-501-1977
NBN-EN 20811-1992 Textile fabrics. Determination of resistance to water penetration. Hydrostatic pressure test (ISO 811:1981)
NBN-EN 302-2-1994

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), p3 laboratory pressure

ASHRAE IC 51-1999-02-1999 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating

IX-FAO, p3 laboratory pressure

CAC/GL 27-1997 Guidelines for the Assessment of the Competence of Testing Laboratories Involved in the Import and Export Control of Foods
CAC/GL 27-1997,Amended 2006(Ch) Guidelines for Capacity Assessment of Testing Laboratories Engaged in Food Import and Export Control
CAC/GL 27-1997(En) Guidelines for Capacity Assessment of Testing Laboratories Engaged in Food Import and Export Control

NATO - North Atlantic Treaty Organization, p3 laboratory pressure

AFLP-8-2005 CAPABILITIES OF NATIONAL/MILITARY LABORATORIES OF NATO AND PARTNER NATIONS (To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso

AWS - American Welding Society, p3 laboratory pressure

PRGVT-1999 The Practical Reference Guide for Welding Inspection Management - Visual Inspection of Pressure Vessels and Pressure Piping

YU-JUS, p3 laboratory pressure

JUS H.N8.224-1991 Corrugate? mediun. Determlnatlon of the flat crush reslstance after laboratory fluting

RO-ASRO, p3 laboratory pressure

STAS SR EN ISO 7263:1996 Corrugating medium - Determination of the flat crush resistance after laboratory fluting
STAS SR ISO 718:1995 Laboratory glassware - Thermal shock and thermal shock endurance - Test methods
STAS 4929-1984 Laboratory glassware CONICAL FLASKS FOR ANTIGRAVITY FILTRATION

Canadian Standards Association (CSA), p3 laboratory pressure

CSA C22.2 No.1010.2.041-96-1996 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-041: Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials, and for Laboratory Processes First Edition
CSA C22.2 No.61010-2-042-98-1998 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-042: Particular Requirements for Autoclaves and Sterilizers Using Toxic Gas for the Treatment of Medical Materials, and for Laboratory Processes First Editio
CSA Z15189-03-CAN/CSA-2003 Laboratoires d碼nalyses de biologie m閐icale Exigences particuli鑢es concernant la qualit?et la comp閠ence Premiere Edition

Professional Standard - Petroleum, p3 laboratory pressure

SY/T 6573-2003 Measurement method for minimum miscibility pressure by slim tube test
SY/T 6573-2016 Measurement method for minimum miscibility pressure by slim tube test
SY 6573-2016 Experimental Determination Method for Minimum Miscibility Pressure-Slim Tube Method

CN-STDBOOK, p3 laboratory pressure

图书 3-9833 Understanding and Implementation of GB/T 27025-2019 "General Requirements for the Capability of Testing and Calibration Laboratories"

Underwriters Laboratories (UL), p3 laboratory pressure

UL 61010A-2-041-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials and for Laboratory Processes First Edition
UL 61010A-2-042-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Autoclaves and Sterilizers Using Toxic Gas for the Treatment of Medical Materials and for Laboratory Processes First Edition

国家能源局, p3 laboratory pressure

NB/T 10523.1-2021 Test methods for mechanical properties of drum shearers Part 1: Laboratory tests

Guangdong Provincial Standard of the People's Republic of China, p3 laboratory pressure

DB44/T 2313-2021 Laboratory evaluation norms for postoperative gastrointestinal motility evaluation in the perioperative period

North Atlantic Treaty Organization Standards Agency, p3 laboratory pressure

STANAG 4616-2005 CAPABILITIES OF NATIONAL/MILITARY LABORATORIES OF NATO AND PARTNER NATIONS - AFlP-8

Professional Standard - Agriculture, p3 laboratory pressure

CNAS-CL01-G001-2018 Application Requirements of CNAS-CL01

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., p3 laboratory pressure

IEEE 664-1993 Guide for Laboratory Measurement of the Power Dissipation Characteristics of Aeolian Vibration Dampers for Single Conductors

PL-PKN, p3 laboratory pressure

PN-EN ISO 15195-2019-04 P Laboratory medicine -- Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)

Institute of Electrical and Electronics Engineers (IEEE), p3 laboratory pressure

IEEE Std 664-1993 IEEE Guide for Laboratory Measurement of the Power Dissipation Characteristics of Aeolian Vibration Dampers for Single Conductors

PH-BPS, p3 laboratory pressure

PNS ISO 17892-7:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test

AT-OVE/ON, p3 laboratory pressure

OVE E 8101-7-7N54-2020 Low-voltage electrical installations - Part 7N54 - Power supply of stationary experiment stands in classrooms

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, p3 laboratory pressure

GB/T 4157-2017 Laboratory testing of metals for resistance to sulfide stress cracking and stress corrosion cracking in H2S environment

AASHTO - American Association of State Highway and Transportation Officials, p3 laboratory pressure

TP 93-2011 Standard Method of Test for Determining Formwork Pressure of Fresh Self-Consolidating Concrete Using Pressure Transducers
TP 93-2012 Standard Method of Test for Determining Formwork Pressure of Fresh Self-Consolidating Concrete Using Pressure Transducers

National Aeronautics and Space Administration (NASA), p3 laboratory pressure

NASA NACA-TR-1051-1951 An analysis of base pressure at supersonic velocities and comparison with experiment