ZH
RU
ES
metal hydrogen capacity
metal hydrogen capacity, Total:494 items.
In the international standard classification, metal hydrogen capacity involves: Wind turbine systems and other alternative sources of energy, Corrosion of metals, Galvanic cells and batteries, Products of non-ferrous metals, Non-ferrous metals, Testing of metals, Lifting equipment, Jewellery, Powder metallurgy, Analytical chemistry, Machine tools, Medical equipment, Quality, Welding, brazing and soldering, Products of the chemical industry, Surface treatment and coating, Inorganic chemicals, Fluid storage devices, Cutting tools, Insulating materials, Measurement of force, weight and pressure, Cycles, Printed circuits and boards, Fuel cells, Heat treatment, Components for aerospace construction, Road vehicle systems, Products of the textile industry, Iron and steel products, Fasteners, Electric road vehicles, Commercial vehicles, Ferrous metals, Lamps and related equipment, Equipment for the metallurgical industry, Elements of buildings, Air quality, Electrical wires and cables, Road engineering, Pipeline components and pipelines, Adhesives, Installations in buildings, Test conditions and procedures in general, Rubber, Equipment for petroleum and natural gas industries, Seals, glands, Aircraft and space vehicles in general, Chipless working equipment, Resistors, Electronic components in general, Structures of buildings, Protective equipment.
Group Standards of the People's Republic of China, metal hydrogen capacity
- T/CEC 260-2019 Test method for hydrogen charging and discharging performance of stationary metal hydride hydrogen storage device for power energy storage
- T/CIAPS 0014-2021 On-board Terminal Sealed Nickel-Metal Hydride Rechargeable Battery Requirements for Intelligent Connected Vehicle
- T/GHDQ 28-2018 Performance requirements and test methods of nickel-metal hydride battery for electric vehicles in frigid regions
- T/ACREI CREIS34003-2022 High abundance RE-Hydrogen Storage alloys for Capacitance type Ni-MH power battery
- T/ZZB 1556-2020 Cylinder sealed alkaline nickel-metal hydride cell
- T/CEC 372-2020 Organic Liquid Hydrogen Storage System for Electric Energy Storage
- T/SHMHZQ 033-2022 High energy metal welding gas
- T/CSAE 52-2016 Test method for mechanical properties of sheet metal at high strain rates
- T/CISA 069-2020 High-speed metal intelligent cold sawing machine
- T/CACEM 00005-2016 Prestressing metallic spiral bellows for highway
- T/QGCML 1698-2023 Metal composition intelligent analysis system
- T/CECA 60-2021 Miniature force sensor of metal strain gauge
- T/CISA 063-2020 Metallic materials—Determination of residual stress—Contour method
German Institute for Standardization, metal hydrogen capacity
- DIN EN ISO 7539-11:2015-03 Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013); German version EN ISO 7539-11:2014
- DIN EN ISO 7539-11:2015 Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013); German version EN ISO 7539-11:2014
- DIN 32516:2022-09 Thermal cutting - Ability for thermal cutting of components of metallic materials - General principles
- DIN 65228:2005 Aerospace - Qualification test of brazers - Brazing of metallic components
- DIN 18168-2:2008-05 Ceiling linings and suspended ceilings with gypsum plasterboards - Part 2: Verification of the load-carrying capacity of metal sub-constructions and metal suspending rods
- DIN EN ISO 17081:2014-10 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique (ISO 17081:2014); German version EN ISO 17081:2014
- DIN EN ISO 3690:2018-12 Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2018); German version EN ISO 3690:2018
- DIN EN 61167:2012 Metal halide lamps - Performance specification (IEC 61167:2011); German version EN 61167:2011
- DIN 18168-2:2008 Ceiling linings and suspended ceilings with gypsum plasterboards - Part 2: Verification of the load-carrying capacity of metal sub-constructions and metal suspending rods
- DIN ISO 4491-2:1998 Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:1997)
- DIN EN ISO 4491-3:2006-06 Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997); German version EN ISO 4491-3:2006
- DIN 50106:1978 Testing of Metallic Materials; Compression Test
- DIN EN 14917:2012 Metal bellows expansion joints for pressure applications; German version EN 14917:2009+A1:2012
- DIN EN 13394:2001-07 Packaging - Specification for non-metallic tensional strapping; German version EN 13394:2001
- DIN EN ISO 17081:2008 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique (ISO 17081:2004); English version of DIN EN ISO 17081:2008-07
- DIN 54452:1981 Testing of adhesives for metals and adhesively bonded metal joints; compression shear test
- DIN EN 10275:1999 Metallic materials - Tube ring hydraulic pressure test; German version EN 10275:1999
- DIN EN ISO 3690:2018 Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2018)
- DIN EN ISO 2740:2007 Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2007); German version EN ISO 2740:2007
- DIN EN 13523-5:2014-08 Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test); German version EN 13523-5:2014
British Standards Institution (BSI), metal hydrogen capacity
- BS EN ISO 7539-11:2014 Corrosion of metals and alloys. Stress corrosion cracking. Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
- BS ISO 7539-11:2013 Corrosion of metals and alloys. Stress corrosion cracking. Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
- BS ISO 16111:2009 Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
- BS ISO 16111:2008 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride
- BS EN ISO 20728:2018 Corrosion of metal and alloys. Determination of resistance of magnesium alloys to stress corrosion cracking
- BS ISO 16111:2018 Tracked Changes. Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
- BS EN ISO 4491-2:1999 Metallic powders - Determination of oxygen content by reduction methods - Loss of mass on hydrogen reduction (hydrogen loss)
- BS ISO 17081:2004 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
- BS EN ISO 17081:2008 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
- BS EN ISO 17081:2014 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
- BS EN ISO 3690:2012 Welding and allied processes. Determination of hydrogen content in arc weld metal
- BS 7886:1997 Method of measurement of hydrogen permeation and the determination of hydrogen uptake and transport in metals by an electrochemical technique
- BS EN ISO 7719:2012 Prevailing torque type all-metal hexagon regular nuts. Property classes 5, 8 and 10
- 21/30421428 DC BS ISO 26303. Machine tools. Short-term capability evaluation of machining processes on metal-cutting machine tools
- BS EN 61167:2011 Metal halide lamps. Performance specification
- BS EN 61167:2016 Metal halide lamps. Performance specification
- BS EN 61167:2018+A1:2018 Metal halide lamps. Performance specification
- BS 903-A37:1997 Physical testing of rubber - Determination of tendency to adhere to and to corrode metals
- BS EN ISO 4491-3:2006 Metallic powders - Determination of oxygen content by reduction methods - Hydrogen-reducible oxygen
- BS EN 10274:1999 Metallic materials - Drop weight tear test
- BS EN 14917:2009+A1:2012 Metal bellows expansion joints for pressure applications
- BS EN 14917:2009 Metal bellows expansion joints for pressure applications
- BS EN 14917:2021 Metal bellows expansion joints for pressure applications
- BS EN ISO 7539-7:2005 Corrosion of metals and alloys - Stress corrosion testing - Method for slow strain rate testing
- BS EN 12501-2:2003 Protection of metallic materials against corrosion - Corrosion likelihood in soil - Low alloyed and non alloyed ferrous materials
- BS ISO 26303:2022 Tracked Changes. Machine tools. Short-term capability evaluation of machining processes on metal-cutting machine tools
Japanese Industrial Standards Committee (JISC), metal hydrogen capacity
- JIS H 7205:2003 Method of measuring discharge capacity of hydrogen absorbing alloys for a negative electrode of a rechargable nickel-metal hydride battery
- JIS Z 3113:1975 Method for measurement of hydrogen evolved from deposited metal
- JIS Z 2614:1990 General rules for determination of hydrogen in metallic materials
- JIS Z 3118:2022 Determination of diffusible hydrogen content in steel weld metal
- JIS C 8708:1997 Sealed nickel-metal hydride rechargeable single cells
- JIS C 8708:2004 Sealed nickel-metal hydride rechargeable single cells
- JIS B 6197:2015 Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools
- JIS C 7623:2005 Metal halide lamps -- Performance specifications
- JIS C 7623:2006 Metal halide lamps -- Performance specification
- JIS C 7623:2011 Metal halide lamps -- Performance specification
- JIS C 7623:2019 Metal halide lamps -- Performance specification
- JIS H 7201:2007 Method for measurement of pressure-composition-temperature(PCT) relations of hydrogen absorbing alloys
- JIS G 0511:2006 Stress corrosion cracking testing of metals and alloys using reverse U-bend test method
- JIS G 0511:2014 Stress corrosion cracking testing of metals and alloys using reverse U-bend test method
- JIS H 8504:1996 Methods of adhesion test for metallic coatings
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, metal hydrogen capacity
- GB/T 15970.11-2022 Corrosion of metals and alloys—Stress corrosion cracking—Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
- GB/T 42656-2023 Test method for kinetic performance of hydrogen absorption and desorption reaction of rare earth hydrogen storage alloy
- GB/T 10623-1989 Metallic materials--Terms of mechanical test
- GB/T 30024-2013 Cranes.Proof of competence of steel structures
- GB/T 10623-2008 Metallic material.Mechanical testing.Vocabulary
- GB/T 14452-1993 Metallic materials. Determination of bending mechanical properties
- GB/T 33292-2016 Metal hydride hydrogen storage system for fuel cells backup power
- GB/T 31963-2015 RE-Mg-Ni-base superlattice hydrogen storage powder used in negative electrodes of nickel-metal hydride batteries
- GB/T 3965-1995 Methods for determination of diffusible hydrogen in deposited metal
- GB/T 3965-2012 Determination of diffusible hydrogen in deposited metal
- GB/T 5158-1999 Metallic powders--Determination of loss of mass on hydrogen reduction (hydrogen loss)
- GB/T 26412-2010 RE-base ABhydrogen storage alloy powder used in negative pole of nickel-metal hydride batteries
- GB/T 13322-1991 Metallic coating.Cd-Ti plating of low hydrogan embrittlement
- GB/T 4164-2002 Metallic powders--Determination of Hydrogen-reducible oxygen content
- GB/T 18288-2000 General specification of nickel-metal hydride battery for cellular phone
- GB/T 18332.2-2001 Nickel-metal hydride batteries of electric road vehicles
- GB/T 4164-2008 Metallic powder.Determination of hydrogen reducible oxygen content
- GB/T 24182-2009 Mechanical testing of metals.Symbols and definitions in published standard
- GB/T 14265-1993 General rule of chemical analysis for hydrogen, oxygen, nitrogen, carbon and sulfur in metal's materials
- GB/T 34542.2-2018 Storage and transportation systems for gaseous hydrogen.Part 2:Test methods for evaluating metallic material compatibility in hydrogen atmosphere
- GB/T 5158.2-2011 Metallic powders.Determination of oxygen content by reduction methods.Part 2: Loss of mass on hydrogen reduction(Hydrogen loss)
- GB/T 15100-1994 General specification for alkaline nickle-metal hydride cylindrical sealed rechargeable batteries
- GB/T 10120-1996 Metallic materials--Stress relaxation test
- GB/T 6276.9-1986 Ammonium hydrogen carbonate for industrial use--Determination of heavy metal content--Visible turbidimetric method
- GB/T 12443-1990 Metallic materials--Torsional stress fatigue testing
- GB/T 7750-1987 The method of creep properties of adhesive in shear by tension loading (metal to metal)
- GB 7750-1987 Test Method for Tensile Shear Creep Properties of Adhesives (Metal to Metal)
- GB/T 13353-1992 Test method for resistance of adhesive bonds to chemical reagents—Metal to metal
- GB/T 15072.12-2008 Test method of precious metal alloys.Determination of nickel contents for silver alloys.Hydrogen peroxide spectrophotometry
- GB/T 26107-2010 Metallic and other inorganic coatings.Test for residual embrittlement in both metallic-coated and uncoated externall-threaded articles and rods.Inclined wedge method
- GB/T 30074-2013 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
- GB/T 29918-2023 Test method for pressure-composition isotherm (PCI) of rare earth hydrogen storage alloys
Association Francaise de Normalisation, metal hydrogen capacity
- NF A05-501-11*NF EN ISO 7539-11:2015 Corrosion of metals and alloys - Stress corrosion testing - Part 11 : guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen assisted cracking
- FD E29-753:2014 Gas cylinders - Hydrogen compatibility testing for metals
- NF E62-153:1983 Machine tools. Horizontal band saws. Dimensions. Capacities.
- NF A05-015*NF EN ISO 20728:2018 Corrosion of metal and alloys - Determination of resistance of magnesium alloys to stress corrosion cracking
- NF E60-180*NF ISO 26303:2022 Machine tools - Short-term capability evaluation of machining processes on metal-cutting machine tools
- NF EN ISO 9185:2007 Vêtements de protection - Évaluation de la résistance des matériaux aux projections de métal fondu
- NF A95-322*NF EN ISO 2740:2009 Sintered metal materials, excluding hardmetals - Tensile test pieces
- NF E25-410*NF EN ISO 7719:2013 Prevailing torque type all-metal hexagon nuts - Property classes 5, 8 and 10
- NF E15-031:1986 Industrial pressure gauges. Recording metallic pressure gauges.
- NF EN ISO 4491-2:2023 Poudres métalliques - Dosage de l'oxygène par les méthodes de réduction - Partie 2 : perte de masse par réduction dans l'hydrogène (perte dans l'hydrogène)
- NF T90-361:2022 Water quality - Determination of the absorbing power of universal absorbent materials - Water and hydrocarbon retention capacity
- NF E25-420*NF EN ISO 7042:2013 Prevailing torque type all-metal hexagon nuts - Property classes 5, 8, 10 and 12
- NF A81-305:2012 Welding and allied processes - Determination of hydrogen content in arc weld metal.
- NF A81-307:1977 WELDING PROCESS WITH WIRE ELECTRODE. PREPARATION OF AN ALL WELD METAL SAMPLE FOR MEASURING DIFFUSIBLE HYDROGEN.
- NF A81-305*NF EN ISO 3690:2018 Welding and allied processes - Determination of hydrogen content in arc weld metal
- NF E15-038:1989 INDUSTRIAL PRESSURE GAUGES. METALLIC PRESSURE GAUGE INDICATORS. ABSOLUTE PRESSURE GAUGES.
- NF A95-181-2*NF EN ISO 4491-2:1999 Metallic powders. Determination of oxygen content by reduction methods. Part 2 : loss of mass on hydrogen reduction (hydrogen loss).
- NF T90-360:2022 Water quality - Determination of the absorbing power of hydrophobic floating absorbent materials - Water and hydrocarbon retention capacity
- NF ISO 26303:2022 Machines-outils - Evaluation de la capacité des procédés d'usinage des machines travaillant par enlèvement de métal
- NF E15-034:2000 Industrial pressure gauges - Metallic pressure gauge indicators - Differential gauges.
- NF E15-034:1989 INDUSTRIAL PRESSURE GAUGES. METALLIC PRESSURE GAUGE INDICATORS. DIFFERENTIAL GAUGES.
- NF E15-012:1997 Pressure gauges. Metallic pressure gauges and their accessories. Couplings.
- NF EN ISO 4491-3:2006 Poudres métalliques - Dosage de l'oxygène par les méthodes de réduction - Partie 3 : oxygène réductible par l'hydrogène
- NF A05-215*NF EN ISO 17081:2014 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
- NF A05-215:2008 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique.
- NF C72-218:2011 Metal halide lamps - Performance specification.
- NF C72-218:2016 Metal halide lamps - Performance specification
- NF C72-218/A1*NF EN 61167/A1:2018 Metal halide lamps - Performance specification
- NF C72-218*NF EN 61167:2018 Metal halide lamps - Performance specification
- NF EN 61167/A1:2018 Lampes aux halogénures métalliques - Spécifications de performances
- NF EN 61167:2018 Lampes aux halogénures métalliques - Spécifications de performance
- NF E25-409*NF EN ISO 7040:2013 Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10
- NF E15-100:2000 Industrial pressure gauges and thermometers - Metallic indicator pressure gauges and thermometers - Pressure gauges and thermometers with control function
- NF E15-100:1988 INDUSTRIAL PRESSURE GAUGES AND THERMOMETERS. METALLIC INDICATOR PRESSURE GAUGES AND THERMOMETERS. PRESSURE GAUGES AND THERMOMETERS WITH CONTROL FUNCTION.
- NF EN ISO 3690:2018 Soudage et techniques connexes - Détermination de la teneur en hydrogène dans le métal fondu pour le soudage à l'arc
- NF A95-121:2011 Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression.
- NF A95-181-3*NF EN ISO 4491-3:2006 Metallic powders - Determination of oxygen content by reduction methods - Part 3 : hydrogen-reducible oxygen
- NF A95-181-3:1989 Metallic powders. Determination of oxygen content by reduction methods. Part 3 : hydrogen-reductible oxygen.
ES-UNE, metal hydrogen capacity
- UNE-EN ISO 7539-11:2015 Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013)
- UNE-EN ISO 4491-2:2000 ERRATUM:2006 Metallic powders. Determination of oxygen content by reduction methods. Part 2: Loss of mass on hydrogen reduction (Hydrogen loss) (ISO 4491-2:1997)
- UNE-EN ISO 3690:2019 Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2018)
- UNE-EN 61167:2018/A1:2018 Metal halide lamps - Performance specification (Endorsed by Asociación Española de Normalización in January of 2019.)
- UNE-EN 61167:2018 Metal halide lamps - Performance specification (Endorsed by Asociación Española de Normalización in December of 2018.)
- UNE-EN 61167:2018/AC:2019-06 Metal halide lamps - Performance specification (Endorsed by Asociación Española de Normalización in August of 2019.)
European Committee for Standardization (CEN), metal hydrogen capacity
- EN ISO 7539-11:2014 Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013)
- CWA 17794-2021 Measurement of diffusible hydrogen in metallic materials - HELIOS 4 HOT PROBE method
- EN ISO 2740:1999 Sintered Metal Materials, Excluding Hardmetals - Tensile Test Pieces ISO 2740: 1999
- EN ISO 2740:2009 Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2009)
- CWA 17794:2021 Measurement of diffusible hydrogen in metallic materials - HELIOS 4 HOT PROBE method
- CEN EN ISO 17081:2008 Method of measurement of hydrogen permeation and determination of hydrogen uptake and
transport in metals by an electrochemical technique
- prEN 24491-2-1992 Metallic powders; determination of oxygen content by reduction methods; part 2: loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:1989)
- EN ISO 17081:2008 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
- EN ISO 17081:2014 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
- EN 10275:1999 Metallic materials - Tube ring hydraulic pressure test
- EN ISO 3690:2018 Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2018)
- EN ISO 3690:2012 Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2012)
- EN 24491-2:1993 Metallic Powders - Determination of Oxygen Content by Reduction Methods - Part 2: Loss of Mass on Hydrogen Reduction (Hydrogen Loss) (ISO 4491-2: 1989)
- FprEN ISO 4491-2 Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO/FDIS 4491-2:2023)
- EN ISO 3928:2016 Sintered metal materials@ excluding hardmetals - Fatigue test pieces
International Organization for Standardization (ISO), metal hydrogen capacity
- ISO 7539-11:2013 Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
- ISO 4491:1978 Metallic powders — Determination of loss of mass on hydrogen reduction (hydrogen loss)
- ISO 16111:2008 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride
- ISO 16111:2018 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride
- ISO 4493:1981 Metallic powders — Determination of hydrogen reducible oxygen content
- ISO/TS 16111:2006 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride
- ISO 26303:2022 Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools
- ISO 17081:2004 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique (Second Edition)
- ISO 17081:2014 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
- ISO 3690:2000 Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal
- ISO 3690:2018 Welding and allied processes - Determination of hydrogen content in arc weld metal
- ISO 4491-2:2023 Metallic powders — Determination of oxygen content by reduction methods — Part 2: Loss of mass on hydrogen reduction (hydrogen loss)
- ISO/TR 14936:1998 Metallic materials - Strain analysis report
- ISO 7719:2012 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10
- ISO 4491-2:1989 Metallic powders; determination of oxygen content by reduction methods; part 2: loss of mass on hydrogen reduction (hydrogen loss)
- ISO 7042:2012 Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12
- ISO 3690:2012 Welding and allied processes - Determination of hydrogen content in arc weld metal
- ISO 15724:2001 Metallic and other inorganic coatings - Electrochemical measurement of diffusible hydrogen in steels - Barnacle electrode method
- ISO 2740:1986 Sintered metal materials (excluding hardmetal); Tensile test pieces
- ISO 7040:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10
YU-JUS, metal hydrogen capacity
- JUS C.A4.019-1986 Mechanlcal testing ofmetals. VVrapping test of wire
- JUS H.G8.053-1983 Reagents. Hydrogen peroxide. Determination of heavy metals content (as Pb). Colorimetric method
- JUS C.N2.003-1986 Mechanical testing of meta/s. Sintered metal materials, excluding hardmetals — Unnotched impact test piece
- JUS C.A4.013-1993 Mechanical testing of metals - Conversion of hardness values steel to tensile strength values
- JUS M.D4.005-1989 Industrial wire screens and woven wire clotb. Aperture size and wire diameter combinations for pre-crimped or pressure welded wire screens
HU-MSZT, metal hydrogen capacity
未注明发布机构, metal hydrogen capacity
- BS 6693-2:1986(1999) Diffusible hydrogen — Part 2 : Method for determination of hydrogen in manual metal - arc weld metal
- BS 6693-1:1986(1999) Diffusible hydrogen — Part 1 : Method for determination of hydrogen in manual metal - arc weld metal using 3 day collection
- BS 6693-3:1988(1999) Diffusible hydrogen — Part 3 : Primary method for the determination of diffusible hydrogen in manual metal - arc ferritic steel weld metal
- DIN EN ISO 14372:2002 Determination of moisture resistance of manual metal arc DIN welding electrodes by measurement of diffusible hydrogen
Professional Standard - Machinery, metal hydrogen capacity
RU-GOST R, metal hydrogen capacity
- GOST 33169-2014 Hoisting cranes. Metal structures. Proof of competence
- GOST 21132.0-1975 Aluminium alloys. Method for determination of hydrogen content in molten metal
- GOST 29006-1991 Metallic powders. Method for determination of hydrogen-reducible oxygen
- GOST 22720.1-1977 Rare metals and their alloys. Methods for the determination of oxygen, hydrogen, nitrogen and carbon
- GOST 24956-1981 Titanium and titanium alloys. Method for the determination of hydrogen
- GOST 34061-2017 Welding and allied processes. Determination of hydrogen content in deposited metal and arc weld metal
- GOST R 54114-2010 Transportable gas storage devices and systems for storing hydrogen based on metal hydrides
- GOST 1497-1984 Metals. Methods of tension test
- GOST 1545-1980 Wire. Torsion test method
- GOST 22720.0-1977 Rare metals and their alloys. General requirements for the methods of determination of oxygen, hydrogen, nitrogen and carbon
- GOST 23338-1991 Welding of metals. Methods for determination of diffusible hydrogen in deposited weld metal and fused metal
- GOST 21132.1-1998 Aluminium and aluminium alloys. Methods for determination of hydrogen in solid metal by vacuum hot extraction
- GOST 21132.1-1981 Aluminium alloys. Measuring hydrogen content insolid metal by solid extraction method
- GOST 18897-1998 Metallic powders. Determination of oxygen content by reduction methods. Loss of mass on hydrogen reduction (hydrogen loss)
- GOST 18897-1973 Metal powder. Method for determination of metal powders losses while heating it in hydrogen
- GOST 9651-1984 Metals. Methods of tension tests at elevated temperatures
- GOST 10145-1981 Metals. Stress-rupture test method
- GOST 6130-1971 Metals and method of determining their heat resistance
- GOST ISO 7042-2016 Prevailing torque type all-metal hexagon high nuts. Property classes 5, 8, 10 and 12
- GOST 12174-1976 Cables. Method of testing the metallic sheath for elongation
- GOST R 53075-2008 Metal halide lamps. Performance requirements
- GOST 9.514-1999 Unified system of corrosion and ageing protection. Corrosion inhibitors of metals for water systems. Electrochemical method pretective ability evaluation
- GOST R 9.915-2010 Unified system of corrosion and ageing protection. Metals, alloys, coatings, products. Test methods of hydrogen embrittlement
- GOST 28873-1990 Alloys on the basis of heavy non-ferrous metals treated under pressure. Unified grades
- GOST R ISO 7042-2011 Prevailing torque type all-metal hexagon nuts, style 2. Property classes 5, 8, 10 and 12
- GOST 3845-2017 Metallic pipes. Internal hydrostatic pressure testing method
国家市场监督管理总局、中国国家标准化管理委员会, metal hydrogen capacity
- GB/T 30024-2020 Cranes—Proof of competence of steel structures
- GB/Z 38434-2019 Metallic materials—Guide to test pieces preparation for mechanical testing
- GB/T 40804-2021 Short-term capability evaluation of machining processes on metal-cutting machine tools
- GB/T 34542.3-2018 Storage and transportation systems for gaseous hydrogen—Part 3: Test method for determination of the susceptibility of metallic materials to hydrogen gas embrittlement (HGE)
- GB/T 41477-2022 Testing methods for mechanical properties of metal parts repaired by laser cladding
- GB/T 40262-2021 Metal coating fabric—Determination of metal layer adhesive force—Tape method
- GB/T 39794.2-2021 Test method for wind uplift resistance of mental roof—Part 2: Dynamic pressure method
- GB/T 39794.1-2021 Test method for wind uplift resistance of metal roof—Part 1 :Static pressure method
- GB/T 39635-2020 Metallic materials—Measurement of indentation tensile properties and residual stresses by an instrumented indentation test
- GB/T 40403-2021 Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, metal hydrogen capacity
- GB/T 35777-2017 Mechanical tests for metal alloys adornment chains—Tensile testing
- GB/T 4157-2017 Laboratory testing of metals for resistance to sulfide stress cracking and stress corrosion cracking in H2S environment
- GB/T 14265-2017 General rule of chemical analysis for hydrogen,oxygen,nitrogen,carbon and sulfur in metallic materials
- GB/T 35990-2018 Metal bellows expansion joints for pressure piping
GM Europe, metal hydrogen capacity
- GME16201-2009 Metallische Werkstoffe unter Wasserstoff (H2) Anwendungen im Fahrzeug Metallic Materials used for Hydrogen (H2) Applications in Motor Vehicles English/German
(U.S.) Ford Automotive Standards, metal hydrogen capacity
Korean Agency for Technology and Standards (KATS), metal hydrogen capacity
- KS C 8543-2015(2020) Vented nickel-metal hydride secondary cells
- KS D 1777-1993 General rules for determination of hydrogen in metallic materials
- KS D 1777-2016 General rules for determination of hydrogen in metallic materials
- KS C 8544-2011 Sealed nickel-metal hydride secondary cells
- KS C 8544-2016(2021) Sealed nickel-metal hydride secondary cells
- KS B ISO 16111:2009 Transportable gas storage devices－Hydrogen absorbed in reversible metal hydride
- KS B ISO 16111-2009(2020) Transportable gas storage devices－Hydrogen absorbed in reversible metal hydride
- KS C 8543-2009 Vented nickel-metal hydride secondary cells
- KS C IEC 61951-2:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes-Portable sealed rechargeable single cells-Part 2:Nickel-metal hydride
- KS C 8543-2015 Vented nickel-metal hydride secondary cells
- KS D 1777-2011 General rules for determination of hydrogen in metallic materials
- KS C IEC 61436-2006(2016) Sealed nickel-metal hydride rechargeable single cells
- KS B ISO 26303:2018 Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools
- KS D 0293-2009 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
- KS D ISO 4491-2-2008(2018) Metallic powders－Determination of oxygen content by reduction methods－Part 2：Loss of mass on hydrogen reduction (hydrogen loss)
- KS B 0801-2007 Test pieces for tensile test for metallic materials
- KS B ISO 7720:2005 Prevailing torque type all-metal hexagon nuts, style 2-Property class 9
- KS B ISO 7720:2013 Prevailing torque type all-metal hexagon nuts, style 2－Property class 9
- KS D 0293-2018 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
- KS D ISO 4491-2:2008 Metallic powders-Determination of oxygen content by reduction methods-Part 2:Loss of mass on hydrogen reduction (hydrogen loss)
- KS B 0802-2003 Method of tensile test for metallic materials
- KS B ISO TR 14936:2003 Metallic materials－Strain analysis report
- KS D 0073-2002 Method of determining the PCT relations of hydrogen-absorbing alloys
- KS C 3993-2022 Power cables with aluminium interlocked metal armor
- KS D 0254-2001(2022) Methods of adhesion test for metallic coating
- KS D 0073-2002(2017) Method of determining the PCT relations of hydrogen-absorbing alloys
- KS D ISO 9587-2012(2022) Metallic and other inorganic coatings－Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
- KS D ISO 9587-2012(2017) Metallic and other inorganic coatings－Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
- KS B 0814-2001 Method of tensile creep test for metallic materials
- KS B ISO 15363-2003(2018)
- KS B ISO 7719:2005 Prevailing torque type all-metal hexagon nuts, style 1－Property classes 5, 8 and 10
- KS B 0413-2001 General dimensional tolerances for parts formed by press working from sheet metal
- KS B 0413-2014 General dimensional tolerances for parts formed by press working from sheet metal
Professional Standard - Ferrous Metallurgy, metal hydrogen capacity
- YB/T 5349-2006 Test methods for bending mechanical properties of metals
- YB/T 5349-2014 Metallic materials.Determination of bending mechanical porperties
Professional Standard - Non-ferrous Metal, metal hydrogen capacity
- YS/T 484-2005 Method for measuring the discharge capacity of the hydrogen storage alloys as the negative electrode of the metal hydride-nickel battery
- YS 5030-1996 Code for design of electric power supply in non-ferrous metal mines
- YS 5030-1996(条文说明) Specifications for electric power design of non-ferrous metal mines
Taiwan Provincial Standard of the People's Republic of China, metal hydrogen capacity
- CNS 14894-2005 General rules for determination of hydrogen in metallic materials
- CNS 7118-1983 Pressure Rating for Ferrous Material Pipe Flanges
国家药监局, metal hydrogen capacity
- YY/T 1781-2021 Test method for mechanical properties of metal U-shaped nails
Military Standard of the People's Republic of China-General Armament Department, metal hydrogen capacity
- GJB 2201-1994 Test methods for ultra-low temperature mechanical properties of metals
- GJB/Z 18-1991 Criteria for expression of mechanical properties data of metal materials
- GJB/Z 18A-2020 Data processing and expression of mechanical properties of metal materials
- GJB 3251A-2011 General specification for nickel.metalhydride rechargeable batteries
- GJB 3251-1998 General specification for metal hydride-nickel storage battery packs
- GJB 8671.9-2015 Test methods for metal cartridges Part 9: Mechanical property tests
国家认证认可监督管理委员会, metal hydrogen capacity
- RB/T 146-2018 Implementation Guide for Mechanical Performance Capability Verification of Metal Products Used in Construction Engineering
National Metrological Verification Regulations of the People's Republic of China, metal hydrogen capacity
- JJG 157-2008 Verification Regulation of Universal Tension and Compression Testing Machines for Non-metallic
- JJG 157-1995 Verification Regulation of Tension Compression and Universal Testing Machina for Non-metallic
The Aluminum Association, metal hydrogen capacity
- AA 19-a Special Report on the Mechanical Properties of Permanent Mold Aluminum Alloy Test Castings
工业和信息化部, metal hydrogen capacity
- XB/T 702-2022 Three-electrode system test method for testing the electrochemical properties of rare earth hydrogen storage alloy powder for metal hydride-nickel battery negative electrodes
- YS/T 1433-2021 Energy consumption limit per unit product of precious metal smelting in the non-ferrous metal industry
- JB/T 10786-2021 Metal mold gravity casting machine technical conditions
Professional Standard - Aviation, metal hydrogen capacity
- HB 5431-1989 Data expression criteria for mechanical properties of metallic materials
- HB 7476-1996 Qualification of metal mechanical performance testing personnel
- HB 7476-2016 Qualification and Certification of Mechanics Testers for Aeronautical Metals
- HB 6686-1992 Test Method for Tensile Shear Creep Properties of Adhesives (Metal to Metal)
- HB 6685-1992 Test Method for Compression Shear Creep Properties of Adhesives (Metal to Metal)
IN-BIS, metal hydrogen capacity
SAE - SAE International, metal hydrogen capacity
- SAE ARP1525-1977 HYDROGEN EMBRITTLEMENT EFFECT ON METALS/CHEMICALS
- SAE J288-1983 Snowmobile Fuel Tanks
- SAE J288-1972 METALLIC AND NONMETALLIC NONPRESSURE INTEGRAL FUEL TANK-SNOWMOBILE
- SAE J288-2008 Snowmobile Fuel Tanks
- SAE J190-1970 Power Steering Pressure Hose - Wire Braid
- SAE J190-2007 Power Steering Pressure Hose - Wire Braid
- SAE J322-1996 Nonmetallic Trim Materials-Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas
- SAE J322-1967 Nonmetallic Trim Materials - Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas
- SAE J322-2009 Nonmetallic Trim Materials—Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas
American Welding Society (AWS), metal hydrogen capacity
- WRC 036:1957 Ultra-High-Strength Weld Metal with Low-Hydrogen Electrodes
- WRC 231:1977 Factors Affecting Weld Metal Properties in Carbon and Low Alloy Pressure Vessel Steels
- WRC 502:2005 Effect of Microfissures on Corrosion Performance and Mechanical Properties of Austenitic Stainless Steel Weld Metals
- AWS BRH APP B-1991 Properties of Brazeable Metals and Alloys Fourth Edition
CZ-CSN, metal hydrogen capacity
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, metal hydrogen capacity
- GJB/Z 18A-2005 Data reduction and presentation of mechanical property for metallic materials
- GJB 5400-2005 Specification for valve metal bellows of hydrogen-oxygen rocket engine
SE-SIS, metal hydrogen capacity
- SIS SS 11 73 05-1979 Metallic powders — Determination of loss of mass on hydrogen reduction
- SIS SS 27 11 12-1986 Corrugated metal sheets — Determination of loadbearing capacity at distributed load
- SIS SS 27 11 13-1986 Corrugated metal sheets — Determination of loadbearing capacity at concentrated load
- SIS SS 06 27 01-1979 Welding electrodes — Covered electrodes — Determination of hydrogen in deposited weld metal
- SIS SS-ISO 7042:1988 Prevailing torque type all-metal hexagon nuts, style 2 - Property classes 5,8, 10 and 12
- SIS SS-ISO 7041:1988 Prevailing torque type hexagon nuts (with non-metallic insett), style 2 - Property classes 9 and 12
- SIS SS-ISO 7040:1988 Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10
Professional Standard - Chemical Industry, metal hydrogen capacity
- HG/T 3942-2007 Sodium hydroxide for industrial use.Determination of metal and nonmetal ions content.ICP method
RO-ASRO, metal hydrogen capacity
- STAS 10047/2-1985 Metals welding DETERMINATION OF DIFFUSIBLE HYDROGEN IN SUBMERGED ARC WELDED METAL, BY VACUUM EXTRACTION METHOD
- STAS 12072-1982 Testing of metals TESTING OF PLATED STEELS AT SHEARING STRENGTH
- STAS 9056-1971 DETERMINATION OF THE MECHANICAL PROPERTIES OF METAL DEPOSITED BY GAS WELDING
- STAS 10047/1-1981 Metal Welding DETERMINATION OF DIFUSIBLE HYDROGEN IN DEPOSITED METAL WITH COVERED ELECTRODES BY THE METHOD OF EXTRACTION IN VACUUM
- STAS SR EN 24491-2-1996 Metallic powders. Determination of oxygen content by reduction methods. Part 2: Loss of mass on hydrogen reduction (hydrogen loss)
- STAS 6951-1976 Tests of metals TENSILE TESTING OF WIRE
- STAS 11399-1980 Tests of metals TORSIONAL STRESS TESTING
- STAS 11011-1988 METALLIC PALLET-BOX FOR ACUMULATORS
- STAS 2172-1984 Tests of metals TENSILE TESTING OF STEEL WIRE ROPES
- SR 7293-1993 Metallic coatings. Methods for testing adhesion
Standard Association of Australia （SAA）, metal hydrogen capacity
- AS ISO 16111:2020 Transportable gas storage devices — Hydrogen absorbed in reversible metal hydride
Underwriters Laboratories (UL), metal hydrogen capacity
VN-TCVN, metal hydrogen capacity
- TCVN 3801-1983 Sodium hydroxide technical.Method of test for heavy metal
Professional Standard - Automobile, metal hydrogen capacity
- QC/T 744-2006 Nickel--metal hydride batteries for electric vehicles
PL-PKN, metal hydrogen capacity
- PN C84039-09-1988 Potassium hydroxide technical Determination of heavy metals content
- PN E04160-13-1987 Electric cables Methods of testing Test of the mechanical characteristics of metallic sheaths
- PN H04964-1991 Metallic powders. Determination of oxygen content by hydrogen-reducible method
- PN C04079-1955 Petroleum products -- Lubricating grease -- Determination of ability to protection of metals against corrosion
- PN E04160 ArkusZ11-1973 Electric cables Methods of testing Test of the mechanical characteristics of vires
- PN M69708-1964 Welding. Mechanic tests of weld metal
- PN H04314-1991 Metals. Static tensile testing of tubes
- PN H04337-1988 The strength tests of metals The antiseizability test on an Amsler machin?
Compressed Gas Association (U.S.), metal hydrogen capacity
- CGA C-21-2015 Standard for Design, qualification, and testing of pressure vessels for portable, reversible metal hydride systems
- CGA C-21-2008 Design, qualification, and testing of pressure vessels for portable, reversible metal hydride systems
- CGA H-1-2011 Service conditions for portable, reversible metal hydride systems
Lithuanian Standards Office , metal hydrogen capacity
- LST EN ISO 6509:2001 Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981)
- LST EN ISO 17081:2008 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique (ISO 17081:2004)
- LST EN ISO 4491-2:2000 Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:1997)
- LST EN ISO 3690:2012 Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2012)
Jiangsu Provincial Standard of the People's Republic of China, metal hydrogen capacity
Professional Standard - Electron, metal hydrogen capacity
- SJ/T 10715-1996 Capability detail specification:single and double sided printed boards with plain holes
- SJ/T 10716-1996 Capability detail specification:single and double sided printed boards with plated-through holes
- SJ/T 11194-1998 Specifications for the batteries of portable transceivers used in mobile services (nickel-metal hydride batteries)
- SJ 20912-2004 Metal Overlay Low Stress Nickel Plating
- SJ 1282-1977 Test methods for adhesion of metallic coatings
WRC - Welding Research Council, metal hydrogen capacity
- BULLETIN 36-1957 ULTRA-HIGH STRENGTH WELD METAL WITH LOW-HYDROGEN ELECTRODES
- BULLETIN 231-1977 FACTORS AFFECTING WELD METAL PROPERTIES IN CARBON AND LOW ALLOY PRESSURE VESSEL STEELS
FI-SFS, metal hydrogen capacity
Society of Automotive Engineers (SAE), metal hydrogen capacity
- SAE J288A-1976 METALLIC AND NONMETALLIC NONPRESSURE INTEGRAL FUEL TANK–SNOWMOBILE
- SAE J190-2012 Power Steering Pressure Hose - Wire Braid (Stabilized Type)
- SAE J190-1998 Power Steering Pressure Hose Wire Braid
- SAE J322-2014 Nonmetallic Trim Materials-Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas
Danish Standards Foundation, metal hydrogen capacity
- DS/ISO 16111:2012 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride
- DS/EN 373:1994 Protective clothing. Assessment of resistance of materials to molten metal splash
- DS/EN ISO 11846:2008 Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
- DS/EN ISO 17081:2008 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
- DS/EN ISO 3690:2012 Welding and allied processes - Determination of hydrogen content in arc weld metal
- DS/EN ISO 4491-2:2000 Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss)
- DS/EN 24491-2:1993 Metallic powders. Determination of oxygen content by reduction methods. Part 2: Loss of mass on hydrogen reduction (hydrogen loss)
- DS/EN 61167:2011 Metal halide lamps - Performance specification
- DS/EN ISO 4491-3:2006 Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen
KR-KS, metal hydrogen capacity
- KS D 0293-2018(2023) Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
- KS B ISO 26303-2018 Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools
- KS B ISO 26303-2018(2023) Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools
- KS D ISO 4491-2-2008(2023) Metallic powders－Determination of oxygen content by reduction methods－Part 2：Loss of mass on hydrogen reduction (hydrogen loss)
- KS D ISO 4491-3-2008(2023) Metallic powders - Determination of oxygen content by reduction methods Part 3 : Hydrogen reducible oxygen
Shanghai Provincial Standard of the People's Republic of China, metal hydrogen capacity
- DB31/ 848-2014 Energy Consumption Quota per Unit Product of Non-ferrous Metal Die Casting
AENOR, metal hydrogen capacity
- UNE-EN 10229:1998 EVALUATION OF RESISTANCE OF STEEL PRODUCTS TO HYDROGEN INDUCED CRACKING (HIC).
- UNE-ISO 26303:2013 Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools
- UNE-EN 13394:2002 Packaging - Specification for non-metallic tensional strapping.
- UNE-EN ISO 17081:2014 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique (ISO 17081:2014)
- UNE-EN ISO 4491-2:2000 METALLIC POWDERS. DETERMINATION OF OXYGEN CONTENT BY REDUCTION METHODS. PART 2: LOSS OF MASS ON HYDROGEN REDUCTION (HYDROGEN LOSS) (ISO 4491-2:1997)
- UNE-EN ISO 3690:2012 Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2012)
CH-SNV, metal hydrogen capacity
National Association of Corrosion Engineers (NACE), metal hydrogen capacity
- NACE TM0177-2005 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments (Item No:21212)
IFI/FASTNR - Industrial Fastener Institute, metal hydrogen capacity
- 524-2002 Test Procedure for the Performance of Metric Nonmetallic Element Prevailing-Torque Screws
- 124-2002 Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Screws
- 124-1996 Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Screws
- 524-1996 Test Procedure for the Performance of Metric Nonmetallic Resistant Element Prevailing-Torque Screws
- 124-1987 Test Procedure for the Locking Ability Performance of Non-Metallic Locking Element Type Prevailing-Torque Lock Screws
- 524-1982 Test Procedure for the Locking Ability Performance of Metric Non-Metallic Locking Element Type Prevailing Torque Lock Screws
- 555-2002 Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Nuts (Metric Series)
- 555-2005 Test Procedure for the Performance of Nonmetallic Resistant Element Prevailing-Torque Nuts (Metric Series)
CEN - European Committee for Standardization, metal hydrogen capacity
- EN ISO 2740:2007 Sintered Metal Materials@ Excluding Hardmetals - Tensile Test Pieces
- EN ISO 3928:2006 Sintered metal materials@ excluding hardmetals - Fatigue test pieces
GM North America, metal hydrogen capacity
IT-UNI, metal hydrogen capacity
Indonesia Standards, metal hydrogen capacity
IPC - Association Connecting Electronics Industries, metal hydrogen capacity
Guangdong Provincial Standard of the People's Republic of China, metal hydrogen capacity
- DB44/T 1478-2014 Test procedures for nickel metal hydride batteries for electric vehicles
- DB44/T 1477-2014 Specifications for the recycling of metal hydride nickel batteries for electric vehicles
American Society for Testing and Materials (ASTM), metal hydrogen capacity
- ASTM F1459-06 Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
- ASTM D8404-21 Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids
- ASTM F1459-93(1998)e1 Standard Test Method for Determination of the Susceptibility of Metallic Materials to Gaseous Hydrogen Embrittlement
- ASTM F145-72(2016) Standard Practice for Evaluating Flat-Faced Gasketed Joint Assemblies
- ASTM G36-94(2000) Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
- ASTM G36-94(2018) Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
- ASTM F1459-06(2017) Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
- ASTM F1459-06(2012) Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
- ASTM E345-93(1998) Standard Test Methods of Tension Testing of Metallic Foil
Professional Standard - Medicine, metal hydrogen capacity
- YY/T 0345.1-2011 Implants for surgery.Skeletal pins and wires.Part 1:Material and mechanical requirements
Professional Standard - Electricity, metal hydrogen capacity
- DL/T 2220-2021 Technical regulations for instrumented indentation method testing of mechanical properties of metal materials in power stations
AR-IRAM, metal hydrogen capacity
Aerospace Industries Association/ANSI Aerospace Standards, metal hydrogen capacity
Canadian Standards Association (CSA), metal hydrogen capacity
ECSS - European Cooperation for Space Standardization, metal hydrogen capacity
Defense Logistics Agency, metal hydrogen capacity
IETF - Internet Engineering Task Force, metal hydrogen capacity
- RFC 7447-2015 Deprecation of BGP Entropy Label Capability Attribute
International Electrotechnical Commission (IEC), metal hydrogen capacity
European Committee for Electrotechnical Standardization（CENELEC）, metal hydrogen capacity
CENELEC - European Committee for Electrotechnical Standardization, metal hydrogen capacity
Fujian Provincial Standard of the People's Republic of China, metal hydrogen capacity
CU-NC, metal hydrogen capacity
- NC 12-04-39-1987 Standards System for Protection Against Corrosion. Acid Corrosion Inhibitors. Methods for the Détermination of Protecting Capacity during Metal Acid Pickling
Professional Standard - Aerospace, metal hydrogen capacity
- QJ 2136.2-1991 Specimens for physical and chemical re-inspection of metallic materials specify mechanical and process performance test specimens
- QJ 479-1979 Test method for adhesion of metal coatings
- QJ 1132-1987 Specifications for performance of metal materials for spacecraft, performance specifications for structural aluminum alloys
Professional Standard - Petroleum, metal hydrogen capacity
- SY/T 7024-2014 Technical code for field hardness test of metal materials used in highly hydrogen sulfide gas field
- SY 7024-2014 Technical specifications for on-site hardness testing of metal materials in high hydrogen sulfide gas fields
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., metal hydrogen capacity
- ASHRAE PH-97-1-3-1997 Cooling Power/Efficiency Diagrams for a Compressor-Driven Metal Hydride Heat Pump
- ASHRAE SF-98-18-4-1998 Compressor-Driven Heat Pump Development Employing Porous Metal Hydride Compacts
- ASHRAE PH-97-5-2-1997 Thermal Breaking Systems for Metal Stud Walls - Can Metal Stud Walls Perform as Well as Wood Stud Walls?
American National Standards Institute （ANSI), metal hydrogen capacity
- ANSI/ASTM E21:1992 Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- BS EN ISO 4491-2:2023 Tracked Changes. Metallic powders. Determination of oxygen content by reduction methods Loss of mass on hydrogen reduction (hydrogen loss) (British Standard)
BR-ABNT, metal hydrogen capacity
United States Navy, metal hydrogen capacity
Professional Standard - Construction Industry, metal hydrogen capacity
住房和城乡建设部, metal hydrogen capacity
建设部, metal hydrogen capacity
ECIA - Electronic Components Industry Association, metal hydrogen capacity
- 498BAAA-1988 Detail Specification for Capability Approval of Metal Dome Contact Touch Stroke Switch Panels
Professional Standard - Traffic, metal hydrogen capacity
- JT/T 1149-2017 Layered double hydroxides anti ultraviolet aging agent used for pavement asphalt
Professional Standard-Safe Production, metal hydrogen capacity
- AQ/T 2072-2019 Electrical test codes for electrical insulation safety appliances in metal and nonmetal mines