ZH
RU
ES

Electroplating nickel release

Electroplating nickel release, Total:127 items.

In the international standard classification, Electroplating nickel release involves: Jewellery, Products of the textile industry, Leather technology, Wastes, Integrated circuits. Microelectronics, Headgear. Clothing accessories. Fastening of clothing, Medical equipment, Miscellaneous domestic and commercial equipment, Clothes, Surface treatment and coating, Linear and angular measurements, Iron and steel products, Electromagnetic compatibility (EMC), Corrosion of metals, Powder metallurgy, Radiation protection, Optoelectronics. Laser equipment, Protection against fire, Electrical wires and cables, Farming and forestry, Telecommunication systems, Non-ferrous metals, Organic chemicals, Aerospace electric equipment and systems.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Electroplating nickel release

GB/T 28485-2012 Coated adornment.Detection of nickel release.Method for simulation of wear and corrosion
GB/T 19719-2005 Jewellery-Determination of the release of nickel-Method of spectrometry
GB/T 30158-2013 Determination of nickel released from accessories on textile products
GB/T 22866-2008 Leather hardware accessory.Determination of release of nickel
GB/T 13744-1992 The measurement of coating thickness of electrodeposited nickel coatings on magnetic and non-magnetic subtracts
GB/T 43093-2023 Lithium nickel manganese oxide electrochemical performance test first discharge specific capacity and first charge and discharge efficiency test method
GB/T 27581-2011 Electromagnetic interference shielding film.Electroless copper plating solution.Method of determining concentration of Ni and Cu

European Committee for Standardization (CEN), Electroplating nickel release

EN 12472:2005 Method for the simulation of wear and corrosion for the detection of nickel release from coated items (Incorporates Amendment A1: 2009)
PD CR 12471-2002 Screening tests for nickel release from alloys and coatings in items that come into direct and prolonged contact with the skin
EN 1811:2023 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
EN ISO 2361:1995 Electrodeposited Nickel Coating on Magnetic and Non-Magnetic Substrates - Measurement of Coating Thickness - Magnetic Method (ISO 2361 : 1982)
EN ISO 28057:2021 Clinical dosimetry - Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy (ISO 28057:2019)
EN 16128:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin
EN 1811:1998 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin Incorporates Amendment A1: April 2008

Korean Agency for Technology and Standards (KATS), Electroplating nickel release

KS K 0853-2011 Test method for determination of nickel release from products intended to come into direct and prolonged contact with the skin:Alternate exposure
KS C IEC 61967-4:2004 Integrated circuits－Measurements of electromagnetic emissions, 150 kHz to 1 GHz－Part 4：Measurement of conducted emissions－1 W/150 W direct coupling method
KS D ISO 2361:2004 Electrodeposited nickel coatings on magnetic and non-magnetic substrates-Measurement of coating thickness-Magnetic method
KS D ISO 2361:2015 Electrodeposited nickel coatings on magnetic and non－magnetic substrates－Measurement of coating thickness－Magnetic method
KS D ISO 2361-2015(2020) Electrodeposited nickel coatings on magnetic and non－magnetic substrates－Measurement of coating thickness－Magnetic method
KS K 0853-2017 Test method for determination of nickel release from products intended to come into direct and prolonged contact with the skin:Alternate exposure
KS C CISPR 19-2004 Electromagnetic compatibility(EMC)- Guidance on the use of the substitution method for measurement of radiation from microwave ovens for frequencies above 1 GHz

KR-KS, Electroplating nickel release

KS K 0854-2017(2022) Test method for simulation of wear and corrosion for the detection of nickel release from coated items：Alternate exposure

Association Francaise de Normalisation, Electroplating nickel release

NF A06-223/IN1:2009 Method for the simulation of wear and corrosion for the detection of nickel release from coated items.
NF A06-223:2009 Method for the simulation of wear and corrosion for the detection of nickel release from coated items.
NF A06-223:2006 Method for the simulation of wear and corrosion for the detection of nickel release from coated items.
NF EN 16128:2015 Optique ophtalmique - Méthode d'essai de référence relative à la libération du nickel par les montures de lunettes et lunettes de soleil
NF A91-120*NF EN ISO 2361:1995 Electrodeposited nickel coatings on magnetic and non-magnetic substrates. Measurement of coating thickness. Magnetic method.
FD A06-222*FD CR 12471:2002 Screening test for nickel release from alloys and coatings in items that come into direct and prolonged contact with the skin
NF M60-565:2014 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
NF S11-555:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin.

Group Standards of the People's Republic of China, Electroplating nickel release

T/GDES 9-2017 Technical requirements for zero discharge of electroplating wastewater in eco - industrial park（Galvanized enterprise）

CZ-CSN, Electroplating nickel release

CSN 03 8149-1974 Determination of the sulphur content in eleclroplated nicke] coatings
CSN ISO 2361:1994 Electrodeposited nickel coatings on magnetic and non-magnetic substrates. Measurement of coating thickness. Magnetic method

CEN - European Committee for Standardization, Electroplating nickel release

PD CEN/TS 16677:2014 Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release
EN ISO 28057:2018 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy

International Electrotechnical Commission (IEC), Electroplating nickel release

IEC 61967-4:2002 Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions; 1 /150 direct coupling method

British Standards Institution (BSI), Electroplating nickel release

BS EN 12472:2005 Method for the simulation of wear and corrosion for the detection of nickel release from coated items
BS EN 12472:2005+A1:2009 Method for the simulation of wear and corrosion for the detection of nickel release from coated items
BS EN 12472:2020 Method for the simulation of wear and corrosion for the detection of nickel release from coated items
BS EN 12472+A1:2006 Method for the simulation of wear and corrosion for the detection of nickel release from coated items
BS PD CEN/TS 16677:2014 Ophthalmic optics. Reference method for the testing of spectacle frames and sunglasses for nickel release
BS EN 16128:2015 Ophthalmic optics. Reference method for the testing of spectacle frames and sunglasses for nickel release
BS EN ISO 2361:1984 Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method
18/30373786 DC BS EN 12472. Method for the simulation of wear and corrosion for the detection of nickel release from coated items
DD IEC/TS 60695-8-3:2008 Fire hazard testing - Heat release. Heat release of insulating liquids used in electrotechnical products
BS EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrostatic discharge immunity test
BS ISO 28057:2014 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
BS EN ISO 28057:2021 Clinical dosimetry. Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy
BS EN 16128:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin

German Institute for Standardization, Electroplating nickel release

DIN EN 16128:2016-02 Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release; German version EN 16128:2015
DIN EN 12472:2020-11 Method for the simulation of accelerated wear and corrosion for the detection of nickel release from coated items; German version EN 12472:2020
DIN EN 12472:2020 Method for the simulation of accelerated wear and corrosion for the detection of nickel release from coated items; German version EN 12472:2020
DIN EN 16128:2016 Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release; German version EN 16128:2015
DIN 13093:2017-09 Screening test for nickel release from consumer articles which are inserted into pierced parts of the human body and consumer articles that come into direct and prolonged contact with the skin; Text in German and English
DIN EN ISO 2361:1995 Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:1982); German version EN ISO 2361:1995

ES-UNE, Electroplating nickel release

UNE-EN 16128:2016 Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release
UNE-EN 12472:2020 Method for the simulation of accelerated wear and corrosion for the detection of nickel release from coated items (Endorsed by Asociación Española de Normalización in November of 2020.)

国家质量监督检验检疫总局, Electroplating nickel release

SN/T 4354-2015 Rapid screening method for nickel release from metal accessories in consumer products Chromogenic method
SN/T 4484-2016 Rapid screening method for nickel release on the surface of imported and exported textile and clothing accessories Energy spectrometry

未注明发布机构, Electroplating nickel release

DIN EN 12472:1999 Simulated abrasion and corrosion testing to detect nickel release from overlaid items
SAE AS22759/87C-2014 Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Nickel Coated, Copper Conductor, 260°C, 600 Volts
SAE AS22759/87D-2018 Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Nickel Coated, Copper Conductor, 260°C, 600 Volts
SAE AS22759/187B-2017 Wire, Electrical, Polytetrafluoroethylene/Polymide Insulated, Smooth Surface, Normal Weight, Nickel-coated Copper Conductor, 260°C, 600 Volts

Professional Standard - Aviation, Electroplating nickel release

HB/Z 5088.1-1999 Electroplating nickel solution analysis method EDTA volumetric method to determine the content of nickel sulfate and magnesium sulfate
HB/Z 5088.4-1999 Analysis method for nickel plating solution Determination of boric acid content through potentiometric titration
HB/Z 5088.3-1999 Analysis method for nickel plating solution Determination of sodium chloride content through potentiometric titration
HB/Z 5089.1-2004 Methods for analysis of plating black nickel solutions Part 1:Determination of ammonium nickel sulfate content by ion selective electrode method
HB/Z 5085.5-1999 Analytical method for cyanide electroplating cadmium solution Determination of nickel sulfate content by EDTA volumetric method
HB/Z 5088.2-1999 Analysis method for nickel plating solution Determination of sodium sulfate content through precipitation titration
HB/Z 5088.6-1999 Analytical method of electroplating nickel solution Determination of copper content by atomic absorption spectrometry
HB/Z 5088.5-1999 Analysis method for nickel plating solution Determination of ferrous content through atomic absorption spectrometry
HB/Z 5089.6-2004 Methods for analysis of plating black nickel solutions Part 6:Determination of boric acid content by potentiometric titrimetric method
HB/Z 5089.2-2004 Methods for analysis of plating black nickel solutions Part 2:Continual determination of nickel sulfate and zinc sulfate content by magnesium sulfate back titrmetric EDTA volumetric method
HB/Z 5090.2-2001 Analysis method for electroless nickel plating solution Determination of sodium hypophosphite content through potentiometric titration
HB/Z 5089.5-2004 Methods for analysis of plating black nickel solutions Part 5:Determination of ammonium thiocyanate content by potentiometric titrimetric method
HB/Z 5089.3-2004 Methods for analysis of plating black nickel solutions Part 3:Continual determination of nickel sulfate and zinc sulfate content by EDTA compleximetric method
HB/Z 5089.4-2004 Methods for analysis of plating black nickel solutions Part 4:Determination of sodium sulfate content by precipitation titrimetric method

Guangdong Provincial Standard of the People's Republic of China, Electroplating nickel release

DB44/T 1376-2014 Method for simulation of wear of metallic and hybrid spectacle frames and detection of nickel release

VN-TCVN, Electroplating nickel release

TCVN 5877-1995 Electrodeposited nickel coatings on magnetic and non-magnetic substrates.Measurement of coating thickness.Magnetic method

ZA-SANS, Electroplating nickel release

SANS 2361:1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method

RU-GOST R, Electroplating nickel release

GOST R 54420-2011 Ophthalmic optics. Metal and combination spectacle frames. Method for the simulation of wear and detection of nickel release
GOST 22466.4-1982 Gaseons discharge continuous sources of high-intensity optical radiation. Methods for measuring electrical parameters
GOST 22466.2-1977 Discharge impulsive sources of highintensity optical radiation. Method for measuring the starting voltage
GOST IEC 60754-1-2011 Tests of materials from cables during combustion. Determination of the amount of evolved halogen acid gas
GOST 22466.3-1977 Discharge impulsive sources of highintensity optical radiation. Method for measuring the self-breakdown voltage

International Organization for Standardization (ISO), Electroplating nickel release

ISO 2361:1972 Title missing - Legacy paper document
ISO 2361:1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates; Measurement of coating thickness; Magnetic method
ISO 28057:2014 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy

American Society for Testing and Materials (ASTM), Electroplating nickel release

ASTM A918-00 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
ASTM B651-83(2001) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
ASTM B651-83(1995) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with the Double-Beam Interference Microscope
ASTM B651-83(2006) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM B651-83(2015) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM B651-83(2019) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM B651-83(2010) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM E1659-12 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
ASTM E1659-05 Standard Test Methods Coating Weight and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
ASTM A918-06(2011) Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

Danish Standards Foundation, Electroplating nickel release

DS/CEN/CR 12471:2002 Screening tests for nickel release from alloys and coatings in items that come into direct and prolonged contact with the skin
DS/ISO 28057:2021 Clinical dosimetry – Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy

Standard Association of Australia （SAA）, Electroplating nickel release

AS/NZS 61000.4.2:2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrostatic discharge immunity test

YU-JUS, Electroplating nickel release

JUS N.C0.085-1989 Test on gases evolved during combustion of electric cables. Determinstion of the amount of halogen acidgas evolved during the combustion of polvmeric materials taken from cables

Society of Automotive Engineers (SAE), Electroplating nickel release

SAE AS22759/3-2007 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, TFE-GLASS-TFE, MEDIUM WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 600-VOLT
SAE AS22759/92A-2006 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260°C, 600 VOLTS
SAE AS22759/3A-2022 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, TFE-GLASS-TFE, MEDIUM WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT, ROHS
SAE AS22759/84B-2006 (R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600-VOLT FSC 6145
SAE AS22759/187-2010 Wire, Electrical, Polytetrafluoroethylene/Polymide Insulated, Smooth Surface, Normal Weight, Nickel-coated Copper Conductor, 260°C, 600 Volts
SAE AS22759/184-2010 Wire, Electrical, Polytetrafluoroethylene/Polymide Insulated, Smooth Surface, Normal Weight, Nickel-coated Copper Conductor, 260°C, 600 Volts
SAE AS22759/87A-2004 Wire, Electrical, Polytetrafluoroethylene/Polyimide Insulated, Normal Weight, Nickel Coated, Copper Conductor, 260°C, 600 Volts
SAE AS22759/87B-2007 (R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600 VOLTS
SAE AS22759/41-2007 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED COPPER, 200°C, 600 VOLT
SAE AS22759/87A-2006 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260°C, 600 VOLTS
SAE AS22759/8A-2020 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, ABRASION RESISTANT EXTRUDED PTFE MEDIUM WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT, ROHS
SAE AS22759/41A-2021 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED, COPPER, 200 °C, 600 VOLT, ROHS
SAE AS22759/92D-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600 BOLTS, ROHS
SAE AS22759/84E-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600 VOLT, ROHS
SAE AS22759/87E-2022 WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600 VOLT, ROHS

国家市场监督管理总局、中国国家标准化管理委员会, Electroplating nickel release

GB/T 37201-2018 Electrochemical performance test of lithium nickel cobalt manganese oxide —Test method for discharge specific capacity and charge-discharge coulombic efficiency of the first cycle

European Association of Aerospace Industries, Electroplating nickel release

AECMA EN 3373-007-2000 Aerospace Series Terminal Lugs and In-Line Splices for Crimping on Electric Conductors Part 007 :Nickel Plated Aluminium Terminal Lugs for Crimping on Nickel Plated Aluminium Cable for Inch Series Studs Product Standard

SE-SIS, Electroplating nickel release

SIS SS-ISO 2361:1983 Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method

American National Standards Institute （ANSI), Electroplating nickel release

ANSI T1.666a-2000 Interactions between the Operator Services Network Capability (OSNC) and Release to Pivot (RTP)

Defense Logistics Agency, Electroplating nickel release

DLA MIL-W-81381/18 VALID NOTICE 4-2013 Wire, Electric, Fluorocarbon/Polyimide Insulated Light Weight, Nickel Coated Copper, 600 Volts Nominal 4.6 Mil Wall

SAE - SAE International, Electroplating nickel release

SAE AS22759/3A-2017 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, TFE-GLASS-TFE, MEDIUM WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT, ROHS
SAE AS22759/8A-2015 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, ABRASION RESISTANT EXTRUDED PTFE MEDIUM WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT, ROHS
SAE AS22759/187A-2014 Wire, Electrical, Polytetrafluoroethylene/Polymide Insulated, Smooth Surface, Normal Weight, Nickel-coated Copper Conductor, 260°C, 600 Volts
SAE AS22759/41A-2016 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSS-LINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL-COATED, COPPER, 200 °C, 600 VOLT, ROHS

Indonesia Standards, Electroplating nickel release

SNI 04-6186.25-2003 Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment