ZH
RU
ES

dsc differential scanning calorimeter 60

dsc differential scanning calorimeter 60, Total:437 items.

In the international standard classification, dsc differential scanning calorimeter 60 involves: Analytical chemistry, Thermodynamics and temperature measurements, Plastics, Rubber, Products of the chemical industry, Pipeline components and pipelines, Products of the textile industry, Aerospace electric equipment and systems, Raw materials for rubber and plastics, Farming and forestry, Waxes, bituminous materials and other petroleum products, Rubber and plastics products, Textile fibres, Petroleum products in general, Electricity. Magnetism. Electrical and magnetic measurements, Protection of and in buildings, Protection against crime, Electronic display devices, Mechanical testing, Education, Protection against dangerous goods, Testing of metals, Reinforced plastics, Lubricants, industrial oils and related products, Materials for aerospace construction, Measurement of volume, mass, density, viscosity, Power stations in general, Physics. Chemistry, Insulating fluids, Insulating materials, Iron and steel products, Fruits. Vegetables, Protection against fire, Pulps, Medical equipment.

工业和信息化部/国家能源局, dsc differential scanning calorimeter 60

JB/T 13176-2017 Differential Scanning Calorimeter

German Institute for Standardization, dsc differential scanning calorimeter 60

DIN 51007-2:2021 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
DIN 51007-2:2021-10 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
DIN 51007:2019 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
DIN 51007:2019-04 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
DIN EN ISO 11357-1:2023-06 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2023); German version EN ISO 11357-1:2023
DIN 51007-1:2023-07 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General principles / Note: Date of issue 2023-05-26*Intended as replacement for DIN 51007 (2019-04).
DIN EN ISO 11357-1:2023 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2023)
DIN EN ISO 11357-4:2021-05 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021); German version EN ISO 11357-4:2021
DIN EN ISO 11357-4:2020 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO/DIS 11357-4:2020); German and English version prEN ISO 11357-4:2020
DIN EN ISO 11357-8:2021-05 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021); German version EN ISO 11357-8:2021
DIN EN ISO 11357-3:2018-07 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018); German version EN ISO 11357-3:2018
DIN EN ISO 11357-7:2022-06 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2022); German version EN ISO 11357-7:2022
DIN EN ISO 11357-7:2021 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO/DIS 11357-7:2021); German and English version prEN ISO 11357-7:2021
DIN EN ISO 11357-1:2010 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2009); German version EN ISO 11357-1:2009
DIN EN ISO 11357-1:2017 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016); German version EN ISO 11357-1:2016
DIN EN ISO 11357-2:2020-08 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height (ISO 11357-2:2020); German version EN ISO 11357-2:2020
DIN EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021); German version EN ISO 11357-4:2021
DIN EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018)
DIN EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014); German version EN ISO 11357-4:2014
DIN EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2005); German version EN ISO 11357-4:2013
DIN EN 3475-414:2007-04 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test); German and English version EN 3475-414:2005 / Note: Applies in conjunction with DIN EN 3475-100 (2002-08), ASTM D 4591 (2001).
DIN EN 6064:2018-03 Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC); German and English version EN 6064:2017
DIN EN 6064:2018 Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC); German and English version EN 6064:2017
DIN EN ISO 11357-2:2020 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height (ISO 11357-2:2020)
DIN EN 6041:2018-03 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC); German and English version EN 6041:2018
DIN EN ISO 11357-7:2015 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015); German version EN ISO 11357-7:2015
DIN EN ISO 11357-7:2013 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2002); German version EN ISO 11357-7:2013
DIN EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC); German and English version EN 6041:2018
DIN EN ISO 11409:1998 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998
DIN EN ISO 11357-5:2014-07 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013); German version EN ISO 11357-5:2014
DIN EN ISO 11409:1998-10 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998
DIN EN ISO 11357-6:2018-07 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018); German version EN ISO 11357-6:2018
DIN EN ISO 11357-8:2020 Plastics - Differential scanning calorimetry - Part 8: Determination of thermal conductivity (ISO/DIS 11357-8:2019); German and English version prEN ISO 11357-8:2019
DIN EN 61074:1994 Methods of test for the determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 61074:1991); German version EN 61074:1993
DIN EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011); German version EN ISO 11357-3:2013
DIN EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)

British Standards Institution (BSI), dsc differential scanning calorimeter 60

BS EN ISO 11357-1:2016 Plastics. Differential scanning calorimetry (DSC). General principles
BS EN ISO 11357-1:1997 Plastics - Differential scanning calorimetry (DSC) - General principles
BS EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - General principles
BS EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Determination of specific heat capacity
BS EN ISO 11357-4:2014 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
BS EN ISO 11357-4:2021 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
BS EN ISO 11357-7:2015 Plastics. Differential scanning calorimetry (DSC). Determination of crystallization kinetics
BS EN ISO 11357-7:2013 Plastics. Differential scanning calorimetry (DSC). Determination of crystallization kinetics
BS ISO 18373-1:2007 Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Measurement of the processing temperature
BS EN ISO 11357-1:2023 Tracked Changes. Plastics. Differential scanning calorimetry (DSC). General principles
BS EN 3475-414:2005 Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
BS EN 3475-414:2006 Aerospace series. Cables, electrical, aircraft use. Test methods. Differential scanning calorimeter (DSC test)
BS EN ISO 11357-8:2021 Plastics. Differential scanning calorimetry (DSC). Determination of thermal conductivity
BS ISO 11357-2:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of glass transition temperature
BS ISO 18373-2:2008 Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Measurement of the enthalpy of fusion of crystallites
BS ISO 22768:2017 Rubber, raw. Determination of the glass transition temperature by differential scanning calorimetry (DSC)
BS ISO 22768:2006 Rubber, raw - Determination of the glass transition temperature by differential scanning calorimetry (DSC)
BS EN ISO 11357-3:2013 Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
BS EN ISO 11357-7:2022 Tracked Changes. Plastics. Differential scanning calorimetry (DSC). Determination of crystallization kinetics
22/30454533 DC BS EN ISO 11357-1. Plastics. Differential scanning calorimetry (DSC). Part 1. General principles
20/30406588 DC BS EN ISO 11357-4. Plastics. Differential scanning calorimetry (DSC). Part 4. Determination of specific heat capacity
BS ISO 24144:2023 Thermal insulation. Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range. Differential scanning calorimetry (DSC) method
BS EN ISO 11357-2:2020 Plastics. Differential scanning calorimetry (DSC) - Determination of glass transition temperature and step height
PD IEC/TR 62036:2007 Mineral insulating oils. Oxidation stability test method based on differential scanning calorimetry (DSC)
BS EN ISO 11357-3:2018 Tracked Changes. Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
BS ISO 23976:2021 Plastics. Fast differential scanning calorimetry (FSC). Chip calorimetry
BS ISO 22768:2020 Raw rubber and rubber latex. Determination of the glass transition temperature by differential scanning calorimetry (DSC)
21/30427373 DC BS EN ISO 11357-7. Plastics. Differential scanning calorimetry (DSC). Part 7. Determination of crystallization kinetics
22/30397422 DC BS ISO 24087. Vulcanized rubbers. Differential scanning calorimetry (DSC). Determination of the glass transition temperature and enthalpy
BS EN ISO 11357-2:2014 Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature and glass transition step height
BS ISO 11357-2:2013 Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature and glass transition step height
PD IEC/TR 61946:2007 Mineral insulating oils. Characterization of paraffinic /naphthenic nature. Low temperature differential scanning calorimetry (DSC) test method
20/30396016 DC BS ISO 23976. Plastics. Fast differential scanning calorimetry. Chip calorimetry
15/30322265 DC BS EN 3475-414. Aerospace series. Cables, electrical, aircraft use. Test methods. Part 414. Differential scanning calorimeter (DSC test)
BS ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS ISO 11357-5:2001 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
20/30400683 DC BS ISO 22768. Raw rubber and rubber latex. Determination of the glass transition temperature by differential scanning calorimetry (DSC)
BS ISO 14322:2018 Tracked Changes. Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
BS ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS ISO 11357-6:2009 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS ISO 11357-6:2008 Plastics - Differential scanning calorimetry (DSC) - Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS EN ISO 11357-6:2013 Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
BS EN 6064:2017 Aerospace series. Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
19/30387785 DC BS EN ISO 11357-2. Plastics. Differential scanning calorimetry (DSC). Part 2. Determination of glass transition temperature and step height
BS EN 6041:2018 Aerospace series. Non-metallic materials. Test method. Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
BS EN ISO 11409:1998 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry
BS EN ISO 11357-6:2018 Tracked Changes. Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
20/30394870 DC BS EN ISO 11357-8. Plastics. Differential scanning calorimetry. Part 8. Determination of thermal conductivity
22/30397807 DC BS ISO 24144. Thermal insulation. Test method for Specific heat capacity of thermal insulation for buildings in the high temperature range. DSC method
BS ISO 28343:2010 Rubber compounding ingredients. Process oils. Determination of glass transition temperature by DSC

Association Francaise de Normalisation, dsc differential scanning calorimeter 60

NF T46-050:2013 Rubber - Differential scanning calorimetry (DSC) - General principles
NF T46-050:2015 Rubber - Differential scanning calorimetry (DSC) - General principles
NF T70-368:2012 Determination of physical characteristics by DSC.
NF EN ISO 11357-1:2023 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 1 : principes généraux
NF T51-507-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: determination of specific heat capacity
NF T51-507-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
NF T51-507-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8 : determination of thermal conductivity
NF T51-507-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
NF EN ISO 11357-8:2021 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 8 : détermination de la conductivité thermique
NF T51-507-7:2013 Plastics - Differential scanning calorimetry (DSC) - Part 7: determination of crystallization kinetics
NF T51-507-7:2015 Plastics - Differential scanning calorimetry (DSC) - Part 7 : determination of crystallization kinetics
NF T51-507-7*NF EN ISO 11357-7:2022 Plastics - Differential scanning calorimetry (DSC) - Part 7 : determination of crystallization kinetics
NF EN ISO 11357-7:2022 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 7 : détermination de la cinétique de cristallisation
NF T51-507-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: determination of temperature and enthalpy of melting and crystallization
NF T51-507-3*NF EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3 : determination of temperature and enthalpy of melting and crystallization
NF EN ISO 11357-2:2020 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 2 : détermination de la température et de la hauteur de palier de transition vitreuse
NF T51-507-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1 : general principles.
NF T51-507-1*NF EN ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1 : general principles
NF L17-041*NF EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
NF T51-507-5*NF EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5 : determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
NF T51-507-2:2014 Plastics - Differential scanning calorimetry (DSC) - Part 2 : determination of glass transition temperature and glass transition step height
NF L17-040*NF EN 6064:2017 Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
NF EN ISO 11357-5:2014 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 5 : détermination des températures et temps caractéristiques de la courbe de réaction, de l'enthalpie de réaction et du degré de transformation
NF EN ISO 11409:1998 Plastiques - Résines phénoliques - Détermination des chaleurs et températures de réaction par calorimétrie différentielle à balayage.
NF T51-507-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
NF T51-507-6*NF EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6 : determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
NF L52-250-414*NF EN 3475-414:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414 : differential scanning calorimeter (DSC test)

Professional Standard - Military and Civilian Products, dsc differential scanning calorimeter 60

WJ 2290-1995 Verification Regulations for Differential Scanning Calorimeter
WJ/T 9054-2006 Test method for thermal stability of industrial explosives: differential scanning calorimetry

European Committee for Standardization (CEN), dsc differential scanning calorimeter 60

EN ISO 11357-1:2023 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2023)
EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2009)
EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
EN ISO 11357-7:2022 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2022)
EN ISO 11357-7:2013 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics
EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
EN ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
EN ISO 11357-1:1997 Plastics - Differential Scanning Calorimetry (DSC) - Part 1: General Principles ISO 11357-1: 1997
EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
EN ISO 11357-7:2015 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015)
EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
prEN ISO 11357-7:2021 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO/DIS 11357-7:2021)
EN ISO 11357-2:2020 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height (ISO 11357-2:2020)
EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
EN ISO 11357-2:2014 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height
EN ISO 11409:1998 Plastics - Phenolic Resins - Determination of Heats and Temperatures of Reaction by Differential Scanning Calorimetry ISO 11409:1993
prEN 61074-1992 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 1074:1991)

International Organization for Standardization (ISO), dsc differential scanning calorimeter 60

ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-1:2023 Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
ISO 11357-4:2005 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity
ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 22768:2006 Rubber, raw - Determination of the glass transition temperature by differential scanning calorimetry (DSC)
ISO 18373-1:2007 Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Part 1: Measurement of the processing temperature
ISO 11357-7:2002 Plastics - Differential scanning calorimetry - (DSC) - Part 7: Determination of crystallization kinetics
ISO 11357-7:2015 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics
ISO 11357-7:2022 Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics
ISO/CD 18177:1980 Plastics-Polyethylene (PE)-Determination of short chain branching distribution by differential scanning calorimetry (DSC)
ISO 11357-2:2013 Plastics-Differential scaming calorimetery(DSC)-Past 2:Determination of glass transition temperature and glass transition step height
ISO 11357-2:1999 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature
ISO 11357-6:2002 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determiantion of oxidation induction time
ISO 22768:2017 Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry (DSC)
ISO 11357-3:2011 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-3:1999 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 23976:2021 Plastics - Fast differential scanning calorimetry (FSC) - Chip calorimetry
ISO 11357-6:2002/Amd 1:2007 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time; Amendment 1
ISO 18373-2:2008 Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Part 2: Measurement of the enthalpy of fusion of crystallites
ISO 11357-2:2020 Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height
ISO 14322:2018 Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
ISO 11357-3:1999/Amd 1:2005 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization; Amendment 1
ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
ISO 11409:1993 Plastics; phenolic resins; determination of heats and temperatures of reaction by differential scanning calorimetry
ISO 19935-2:2020 Plastics — Temperature modulated DSC — Part 2: Measurement of specific heat capacity cp
ISO 11357-5:2013 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
ISO 24087:2023 Rubber, vulcanized — Determination of the glass transition temperature and enthalpy by differential scanning calorimetry
ISO 11357-6:2008 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 22768:2020 Raw rubber and rubber latex — Determination of the glass transition temperature by differential scanning calorimetry (DSC)
ISO/CD 22206:1980 Kraft lignin - Glass transition temperature by differential scanning calorimetry
ISO/DIS 22206:2023 Kraft lignin — Glass transition temperature by differential scanning calorimetry
ISO 24144:2023 Thermal insulation — Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range — Differential scanning calorimetry (DSC) method

Korean Agency for Technology and Standards (KATS), dsc differential scanning calorimeter 60

KS M ISO 11357-1-2016(2021) Plastics－Differential scanning calorimetry(DSC)－Part 1：General principles
KS M ISO 11357-4-2016(2021) Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
KS M ISO 11357-7:2003 Plastics — Differential scanning calorimetry(DSC) — Part 7:Determination of crystallization kinetics
KS M ISO 11357-7:2016 Plastics — Differential scanning calorimetry(DSC) — Part 7：Determination of crystallization kinetics
KS M ISO 11357-7-2016(2021) Plastics — Differential scanning calorimetry(DSC) — Part 7：Determination of crystallization kinetics
KS M ISO 11357-4:2012 Plastics-Differential scanning calorimetry(DSC)-Part 4:Determination of specific heat capacity
KS M ISO 11357-4:2016 Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
KS M ISO 11357-6:2013 Plastics ㅡ Differential scanning calorimetry (DSC) ㅡ Part 6: Determination of oxidation induction time
KS M ISO 11357-6:2003 Plastics &##8722; Differential scanning calorimetry(DSC)-Part 6:Determination of oxidation induction time
KS M ISO 22768:2021 Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry(DSC)
KS M ISO 11357-2-2015(2020) Plastics — Differential scanning calorimetry(DSC) — Part 2：Determination of glass transition temperature
KS C IEC 61074:2002 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
KS M ISO 11357-3:2018 Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
KS C 2132-1996 Testing method for oxidative-induction time of polyolefins by differential scanning calorimetry
KS M ISO 11409:2006 Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry
KS M ISO 11357-5:2007 Plastics-Differential scanning calorimetry(DSC)-Part 5:Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS M ISO 11357-5:2015 Plastics－Differential scanning calorimetry(DSC)－Part 5：Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS M ISO 11357-3:2013 Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
KS M ISO 11357-3:2003 Plastics -Differential scanning calorimetry (DSC) -Part 3:Determination of temperature and enthalpy of melting and crystallization
KS M ISO 11357-5-2015(2020) Plastics－Differential scanning calorimetry(DSC)－Part 5：Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS M ISO 11409-2006(2017) Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry
KS M ISO 11409-2006(2022) Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry
KS C IEC 61074-2002(2012) Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
KS M ISO 11357-6:2018 Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
KS C 2132-1996(2021) Testing method for oxidative-induction time of polyolefins by differential scanning calorimetry

KR-KS, dsc differential scanning calorimeter 60

KS M ISO 11357-1-2016 Plastics－Differential scanning calorimetry(DSC)－Part 1：General principles
KS M ISO 11357-4-2016 Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
KS M ISO 11357-7-2016 Plastics — Differential scanning calorimetry(DSC) — Part 7：Determination of crystallization kinetics
KS M ISO 22768-2021 Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry(DSC)
KS M ISO 11357-3-2018 Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
KS M ISO 11357-6-2018 Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, dsc differential scanning calorimeter 60

GB/T 19466.1-2004 Plastics-Differential scanning calorimetry(DSC)-Part 1:General principles
GB/T 29611-2013 Rubber,raw.Determination of the glass transition temperature.Differential scanning calorimetry (DSC)
GB/T 19466.2-2004 Plastics-Differential scanning calorimetry(DSC)-Part 2:Determination of glass transition temperature
GB/T 33466.1-2016 Rigid PVC pipes.Differential scanning calorimetry (DSC) method.Part 1:Measurement of the processing temperature
GB/T 19466.3-2004 Plastics-Differential scanning calorimetry(DSC)-Part 3:Determination of temperature and enthalpy of melting and crystallization
GB/T 41928-2022 Plastics—Epoxy resins—Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
GB/T 22232-2008 Test method for the thermal stability of chemicals by differential scanning calorimetry
GB/T 15814.3-1995 Reagent of fireworks and firecrackers--Thermal compatibility test--Method of DTA and DSC
GB/T 17594-1998 Textile material--Test method for themotransition temperature--Differential scanning calorimetry (DSC)
GB/T 28724-2012 Determination of melting temperature for chemicals(pharmaceuticals).Differential scanning calorimetry(DSC)
GB/T 28723-2012 Determination of purity for chemicals (pharmaceuticals).Differential scanning calorimetry(DSC)
GB/T 19466.5-2022 Plastics—Differential scanning calorimetry (DSC)—Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
GB/T 19466.6-2009 Plastics.Differential scanning calorimetry(DSC).Part 6:Determination of oxidation induction time(isothermal OIT) and oxidation induction temperature (dynamic OIT)
GB/T 32681-2016 Plastics.Phenolic resins.Determination of heats and temperatures of reaction by differential scanning calorimetry

CEN - European Committee for Standardization, dsc differential scanning calorimeter 60

EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
EN 6064:2017 Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)

National Metrological Verification Regulations of the People's Republic of China, dsc differential scanning calorimeter 60

JJG 936-2012 Differential Scanning Calorimeters
JJG 936-1998 Verification Regulation of the Differential Scanning Calorimeter

RU-GOST R, dsc differential scanning calorimeter 60

GOST R 55134-2012 Plastics. Differential scanning calorimetry (DSC). Part 1. General principles
GOST R 56754-2015 Plastics. Differential scanning calorimetry (DSC). Part 4. Determination of specific heat capacity
GOST R 56757-2015 Plastics. Differential scanning calorimetry (DSC). Part 7. Determination of crystallization kinetics
GOST R 55135-2012 Plastics. Differential scanning calorimetry (DSC). Part 2. Determination of glass transition temperature
GOST R 56724-2015 Plastics. Differential scanning calorimetry (DSC). Part 3. Determination of temperature and enthalpy of melting and crystallization
GOST R 57952-2017 Fluoropolymers. Determining temperatures and heat of transition by differential scanning calorimetry
GOST R 56755-2015 Plastics. Differential scanning calorimetry (DSC). Part 5. Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
GOST R 57969-2017 Polymer composites. Determination of specific heat capacity by differential scanning calorimetry with temperature modulation
GOST R 56756-2015 Plastics. Differential scanning calorimetry (DSC). Part 6. Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
GOST R 57687-2017 Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry

Danish Standards Foundation, dsc differential scanning calorimeter 60

DS/EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
DS/EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
DS/ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity
DS/ISO 11357-4:2021 Plastics – Differential scanning calorimetry (DSC) – Part 4: Determination of specific heat capacity
DS/EN ISO 11357-7:2013 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics
DS/EN ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
DS/EN ISO 11357-4:2021 Plastics – Differential scanning calorimetry (DSC) – Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
DS/ISO 18373-1:2007 Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Part 1: Measurement of the processing temperature
DS/EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
DS/EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
DS/EN ISO 11409:1999 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry
DS/EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
DS/EN 61074:1994 Determination of heats and temperatures of melting and crystallixation of electrical insulating materials by differemtial scamming calorimetry

国家市场监督管理总局、中国国家标准化管理委员会, dsc differential scanning calorimeter 60

GB/T 40271-2021 Test method for identification of textile fibers—Differential scanning calorimetry（DSC）

ES-UNE, dsc differential scanning calorimeter 60

UNE-EN ISO 11357-1:2017 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016)
UNE-EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
UNE-EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
UNE-EN ISO 11357-7:2022 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2022)
UNE-EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018)
UNE-EN ISO 11357-2:2021 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height (ISO 11357-2:2020)
UNE-EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test) (Endorsed by AENOR in December of 2005.)
UNE-EN 6064:2017 Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC) (Endorsed by Asociación Española de Normalización in February of 2018.)
UNE-EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC) (Endorsed by Asociación Española de Normalización in March of 2018.)
UNE-EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
UNE-EN 61074:1993 DETERMINATION OF HEATS AND TEMPERATURES OF MELTING AND CRYSTALLIZATION OF ELECTRICAL INSULATING MATERIALS BY DIFFERENTIAL SCANNING CALORIMETRY. (Endorsed by AENOR in November of 1995.)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, dsc differential scanning calorimeter 60

GB/T 19466.4-2016 Plastics—Differential scanning calorimetry （DSC）—Part 4: Determination of specific heat capacity

IT-UNI, dsc differential scanning calorimeter 60

UNI EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity
UNI EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity

Japanese Industrial Standards Committee (JISC), dsc differential scanning calorimeter 60

JIS K 6240:2011 Rubber, raw -- Determination of the glass transition temperature by differential scanning calorimetry (DSC)
JIS K 7148-1:2022 Plastics -- Epoxy resins -- Part 1: Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)

Professional Standard - Petrochemical Industry, dsc differential scanning calorimeter 60

SH/T 1771-2010 Rubber,raw.Determination of the glass transition temperature by differential scanning calorimetry(DSC)
SH/T 1838-2023 Plastics—Determination of short chain branching distribution of ethylene-α-olefin copolymer —Differential scanning calorimetry (DSC)
SH/T 0589-1994 Determination of petroleum wax transition temperature (differential scanning calorimetry)
NB/SH/T 0832-2010 Determination of hot surface oxidation of lubricating oils by pressure differential scanning calorimetry
SH/T 0719-2002 Standard test method for oxidation induction time of lubricating oils by pressure differential scanning calorimetry (PDSC)
SH/T 0790-2007 Standard test method for oxidaation induction time of lubricating greases by pressure differential scanning calorimetry

Shandong Provincial Standard of the People's Republic of China, dsc differential scanning calorimeter 60

DB37/T 339-2003 Method for Determination of Purity of Phthalic Anhydride - Differential Scanning Calorimetry (DSC)

Lithuanian Standards Office , dsc differential scanning calorimeter 60

LST EN ISO 11357-1:2010 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2009)
LST EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
LST EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
LST EN 3475-414-2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
LST EN ISO 11409:2000 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993)

AT-ON, dsc differential scanning calorimeter 60

OENORM EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
OENORM EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
OENORM EN ISO 11357-7:2021 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO/DIS 11357-7:2021)

CH-SNV, dsc differential scanning calorimeter 60

SN EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
SN EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)

PL-PKN, dsc differential scanning calorimeter 60

PN-EN ISO 11357-4-2021-07 E Plastics--Differential scanning calorimetry (DSC)--Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
PN-EN ISO 11357-8-2021-08 E Plastics--Differential scanning calorimetry (DSC)--Part 8: Determination of thermal conductivity (ISO 11357-8:2021)

AENOR, dsc differential scanning calorimeter 60

UNE-EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014)
UNE-EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011)
UNE-EN ISO 11357-2:2015 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013)
UNE-EN ISO 11409:1999 PLASTICS - PHENOLIC RESINS - DETERMINATION OF HEATS AND TEMPERATURES OF REACTION BY DIFFERENTIAL SCANNING CALORIMETRY (ISO 11409:1993)
UNE-EN ISO 11357-5:2015 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)
UNE-EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008)

American Society for Testing and Materials (ASTM), dsc differential scanning calorimeter 60

ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM D4419-90(2005) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM E2603-15 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E2069-06(2018) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2069-19 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM D4419-90(2000) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D4419-90(1995)e1 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D4419-90(2015) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D4419-90(2021) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM E2253-08 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2253-21 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM F3418-20 Standard Test Method for Measurement of Transition Temperatures of Slack Waxes used in Equine Sports Surfaces by Differential Scanning Calorimetry (DSC)
ASTM E968-02(2014) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM E1356-98 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis
ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E1269-11(2018) Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E2253-03 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2253-08e1 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2041-01 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E928-03 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
ASTM E928-08(2014) Standard Test Method for Purity by Differential Scanning Calorimetry
ASTM E126-92(1998) Standard Test Method for Inspection and Verification of Hydrometers
ASTM E1269-01 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-99 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E2041-13e1 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM D5483-05 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM E928-19 Standard Test Method for Purity by Differential Scanning Calorimetry
ASTM E2603-15(2023) Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM E2253-16 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2069-06 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2069-00 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2069-06(2012) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2160-04(2018) Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM E2160-23 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM E2253-11 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2603-08 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM E537-20 Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry
ASTM E2716-09 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
ASTM E2160-01 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM E2160-04 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM E537-12 Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry
ASTM E1356-03 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM E793-95 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E793-06(2018) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E2070-08 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM E1356-08 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM E1952-17 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E3174-20 Standard Practice for Determination of Kinetic Reaction Model Using Differential Scanning Calorimetry
ASTM E3174-21 Standard Practice for Determination of Kinetic Reaction Model Using Differential Scanning Calorimetry
ASTM D3418-03 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM E3174-19 Standard Practice for Determination of Kinetic Reaction Model Using Differential Scanning Calorimetry
ASTM E3174-22 Standard Practice for Determination of Kinetic Reaction Model Using Differential Scanning Calorimetry
ASTM E2923-13 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
ASTM E2923-14 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
ASTM D4419-90(2010) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D3418-08 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM E1356-08(2014) Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM E1356-23 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM E2041-03 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2041-99 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E1858-03 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM E2070-03 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM E2070-00 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM E2923-14(2019) Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
ASTM E2009-23 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM E1858-08 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM D4591-17 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM E1952-23 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM D7426-08(2013) Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound
ASTM D7426-08 Standard Test Method for Assignment of the DSC Procedure for Determining T_g of a Polymer or an Elastomeric Compound
ASTM D3895-04 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D3895-06 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D3895-02 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D3895-03 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM E1858-08(2015)e1 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM E2070-13 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM D3895-14 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM E1952-01 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-06 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-98 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry

Group Standards of the People's Republic of China, dsc differential scanning calorimeter 60

T/CSIQ 72003-2020 Rigid PVC pipes—Measurement of enthalpy of fusion of crystallites—Differential scanning calorimetry (DSC) method
T/CCFA 00004-2015 Quantitative analysis of PPS/PTFE-Differential scanning calorimetry (DSC)
T/SBX 026-2019 Determination of Melting Point of Liquid Crystal Monomer by Differential Scanning Calorimetry
T/CIESC 0002-2020 Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Calorimetry and Differential Scanning Calorimetry

未注明发布机构, dsc differential scanning calorimeter 60

DIN EN ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
BS ISO 18373-2:2008(2011) Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 2 : Measurement of the enthalpy of fusion of crystallites
BS ISO 18373-1:2007(2012) Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 1 : Measurement of the processing temperature
DIN EN ISO 11357-7:2022 Plastics – Differential scanning calorimetry (DSC) – Part 7: Determination of crystallization kinetics (ISO 11357-7:2022)
BS EN ISO 11409:1998(1999) Plastics — Phenolic resins — Determination of heats and temperatures of reaction by differential scanning calorimetry

Professional Standard - Energy, dsc differential scanning calorimeter 60

NB/SH/T 0632-2014 Standard test method for determining specific heat capacity by differential scanning calorimetry

Professional Standard - Textile, dsc differential scanning calorimeter 60

FZ/T 50061-2023 Man-made fibers——Test method for thermal absorption and release performance of phase change materials——Differential scanning calorimetry(DSC)
FZ/T 01160-2022 Quantitative analysis of textile polyphenylene sulfide fiber and polytetrafluoroethylene fiber mixture Differential scanning calorimetry (DSC)
FZ/T 10015-2011 Testing method for polyacrylic sizes used in textile warp sizing.Determination of glass transition temperature.Differential scanning calorimetry(DSC)

Professional Standard - Aviation, dsc differential scanning calorimeter 60

HB 7614-1998 Differential Scanning Calorimetry (DSC) Test Method for Degree of Curing of Composite Resin Matrix

国家能源局, dsc differential scanning calorimeter 60

SH/T 1799-2016 Determination of glass transition temperature of synthetic rubber latex by Differential Scanning Calorimetry (DSC)
NB/SH/T 0901-2015 Determination of glass transition temperature of mineral oils by differential scanning calorimetry

NATO - North Atlantic Treaty Organization, dsc differential scanning calorimeter 60

STANAG 4515-2015 EXPLOSIVES. THERMAL ANALYSIS USING DIFFERENTIAL THERMAL ANALYSIS (DTA). DIFFERENTIAL SCANNING CALORIMETRY (DSC)@ HEAT FLOW CALORIMETRY (HFC)@ AND THERMOGRAVIMETRIC ANALYSIS (TGA) (ED 2)

National Metrological Technical Specifications of the People's Republic of China, dsc differential scanning calorimeter 60

JJF 1697-2018 Program of Pattern Evaluation of Differential Scanning Calorimeters

Professional Standard - Chemical Industry, dsc differential scanning calorimeter 60

HG/T 4659-2014 Textile dyeing and finishing auxiliaries.Determination of glass transition temperature of the polymer.Differential scanning calorimetry (DSC)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, dsc differential scanning calorimeter 60

PREN 3475-414-1999 Aerospace Series Cables@ Electrical@ Aircraft Use Test Methods Part 414: Differential Scanning Calorimeter (DSC Test) (Edition P 1)
PREN 6041-1995 Aerospace Series Non-Metallic Materials Test Method Analysis of Non-Metallic Materials (Uncured) by Differential Scanning Calorimetry (DSC) (Edition P1)
PREN 6064-1995 Aerospace Series Non-Metallic Materials Analysis of Non-Metallic Materials (Cured) for the Determination of the Extent of Cure by Differential Scanning Calorimetry (DSC) (Edition P1)

Professional Standard - Public Safety Standards, dsc differential scanning calorimeter 60

GA/T 2080-2023 Forensic sciences—Examination methods for plastics—Differential scanning calorimetry(DSC)
GA/T 1994-2022 Forensic Science Synthetic Fiber Examination Differential Scanning Calorimetry
GA/T 2077-2023 Forensic sciences—Examination methods for projectiles and soldering tin—Differential scanning calorimetry(DSC)

North Atlantic Treaty Organization Standards Agency, dsc differential scanning calorimeter 60

STANAG 4515-2002 EXPLOSIVES: THERMAL CHARACTERIZATION BY DIFFERENTIAL THERMAL ANALYSIS, DIFFERENTIAL SCANNING CALORIMETRY AND THERMOGRAVIMETRIC ANALYSIS

国家质量监督检验检疫总局, dsc differential scanning calorimeter 60

SN/T 4704-2016 Isothermal detection of kinetic parameters Differential scanning calorimetry

Professional Standard - Commodity Inspection, dsc differential scanning calorimeter 60

SN/T 2942-2011 Assessment of thermal oxidation stability of plastics.Differential scanning calorimetry
SN/T 4372-2015 Determination of oxidative-induction time of polyolefins.Differential scanning calorimetry
SN/T 3950-2014 Determination of oxidative onset temperature of hydrocarbons by differential.Scanning calorimetry
SN/T 3120-2012 Determination of the glass transition temperature of raw rubber.Differential scanning calorimetry (DSC)

Professional Standard - Education, dsc differential scanning calorimeter 60

JY/T 0589.3-2020 General Principles of Thermal Analysis Methods Part 3: Differential Scanning Calorimetry
JY/T 0589.5-2020 General Principles of Thermal Analysis Methods Part 5: Thermogravimetric-Differential Thermal Analysis and Thermogravimetric-Differential Scanning Calorimetry

工业和信息化部, dsc differential scanning calorimeter 60

YS/T 1256-2018 Differential scanning calorimetry for specific heat capacity test of non-ferrous metal materials
YS/T 1257-2018 Differential scanning calorimetry for melting and crystallization enthalpy tests of non-ferrous metal materials
SH/T 1826-2019 Determination of melting enthalpy, crystallinity and melting temperature of plastic ultra-high molecular weight polyethylene (PE-UHMW) materials and products by differential scanning calorimetry (DSC)

Professional Standard - Petroleum, dsc differential scanning calorimeter 60

SY/T 0545-2012 Determination of thermal property parameters of the wax precipitation in crude oil.Test method by differential scanning calorimetry
SY 0545-2012 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry
SY/T 0545-1995 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry

Aerospace, Security and Defence Industries Association of Europe (ASD), dsc differential scanning calorimeter 60

ASD-STAN PREN 6064-1995 Aerospace Series Non-Metallic Materials Analysis of Non-Metallic Materials (Cured) for the Determination of the Extent of Cure by Differential Scanning Calorimetry (DSC) (Edition P1)
ASD-STAN PREN 3475-414-1999 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 414: Differential Scanning Calorimeter (DSC Test) (Edition P 1)

Professional Standard - Agriculture, dsc differential scanning calorimeter 60

SN/T 3807-2014 Determination of the purity of phthalic anhydride by differential scanning calorimetry

GOSTR, dsc differential scanning calorimeter 60

GOST R 57920-2017 Plastics. Phenolic resins. Determination of heat and temperature of reaction by differential scanning calorimetry
GOST R 57830-2017 Composites. Determination of thermal conductivity and thermal diffusivity by modulated temperature differential scanning calorimetry

Military Standard of the People's Republic of China-General Armament Department, dsc differential scanning calorimeter 60

GJB 772.202-1989 Explosives test methods Explosives compatibility test Differential thermal analysis and differential scanning calorimetry
GJB 737.14-1995 Test Methods for Pyrotechnic Agents Compatibility Test Differential Thermal Analysis and Differential Scanning Calorimetry
GJB 8683.10-2015 Test methods for physical parameters of pyrotechnics Part 10: Determination of thermal conductivity by differential scanning calorimetry
GJB 8683.8-2015 Test methods for physical parameters of pyrotechnics Part 8: Continuous specific heat capacity determination Differential scanning calorimetry
GJB 8683.11-2015 Test methods for physical parameters of pyrotechnics Part 11: Determination of spontaneous ignition temperature Differential thermal analysis and differential scanning calorimetry

GM North America, dsc differential scanning calorimeter 60

GM GM9094P-1988 Method for Determining Melting Point of Semicrystalline Polymers by Differential Scanning Calorimetry

Professional Standard - Electricity, dsc differential scanning calorimeter 60

DL/T 1977-2019 Determination of oxidation stability of mineral insulating oils by differential scanning calorimetry

International Electrotechnical Commission (IEC), dsc differential scanning calorimeter 60

IEC TR 61946:2007 Mineral insulating oils - Characterization of paraffinic/naphthenic nature - Low temperature differential scanning calometry (DSC) test method
IEC TR 61074:1991 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry

European Association of Aerospace Industries, dsc differential scanning calorimeter 60

AECMA PREN 6064-1995 Aerospace Series Non-Metallic Materials Analysis of Non-Metallic Materials (Cured) for the Determination of the Extent of Cure by Differential Scanning Calorimetry (DSC) Edition P1
AECMA PREN 3475-414-1999 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 414: Differential Scanning Calorimeter (DSC Test) Edition P 1

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, dsc differential scanning calorimeter 60

GJB 5891.17-2006 Test method of loading material for initiating explosive device Part 17: Compatibility test Method of DTA and DSC
GJB 5382.10-2005 Test methods of physical parameter for pyrotechnic. Part 10: Determination of thermal conductivity. DSC method
GJB 5382.8-2005 Test methods of physical parameter for pyrotechnic. Part 8: Determination of specific heat capacity. DSC method
GJB 5382.11-2005 Test methods of physical parameter for pyrotechnic. Part 11: Determination of Autoignition temperature. DTA and DSC method

Professional Standard - Medicine, dsc differential scanning calorimeter 60

YY/T 0815-2010 Standard test method for measurement of enthalpy of fusion, percent crystallinity ，and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry

European Committee for Electrotechnical Standardization（CENELEC）, dsc differential scanning calorimeter 60

EN 61074:1993 Determination of Heats and Temperatures of Melting and Crystallization of Electrical Insulating Materials by Differential Scanning Calorimetry (IEC 1074 : 1991)

American National Standards Institute （ANSI), dsc differential scanning calorimeter 60

ANSI/ASTM D4591:2001 Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry