ZH
RU
ES

Is measure the same as measure?

Is measure the same as measure?, Total:498 items.

In the international standard classification, Is measure the same as measure? involves: Rubber and plastics products, Metalliferous minerals, Analytical chemistry, Vocabularies, Metrology and measurement in general, Test conditions and procedures in general, Non-ferrous metals, Leather technology, Elements of buildings, Quality, Linear and angular measurements, Milk and milk products, Ferroalloys, Products of the textile industry, Air quality, Testing of metals, Fuels, Electromagnetic compatibility (EMC), General methods of tests and analysis for food products, Microbiology, Radiation measurements, Nuclear energy engineering, Beverages, Optoelectronics. Laser equipment, Laboratory medicine, Measurement of force, weight and pressure, Earth-moving machinery, Quantities and units, Measurement of time, velocity, acceleration, angular velocity, Optics and optical measurements, Road engineering, Measurement of fluid flow, Chipless working equipment, Soil quality. Pedology, Adhesives, Electromechanical components for electronic and telecommunications equipment, Surface treatment and coating, Fertilizers, Inorganic chemicals, Continuous handling equipment, Construction industry, Paper and board, Integrated circuits. Microelectronics, Ferrous metals, Non-destructive testing, Acoustics and acoustic measurements, Construction materials, Waxes, bituminous materials and other petroleum products, Petroleum products in general, Electricity. Magnetism. Electrical and magnetic measurements, Thermodynamics and temperature measurements, Optical equipment, Measurement of volume, mass, density, viscosity, Mechanical testing, Solar energy engineering, Medical equipment, Paint ingredients, Vibrations, shock and vibration measurements, Document imaging applications, Telecommunication systems, Raw materials for rubber and plastics, Equipment for petroleum and natural gas industries, Road vehicles in general.

CH-SNV, Is measure the same as measure?

SNV 24700-1937

HU-MSZT, Is measure the same as measure?

Korean Agency for Technology and Standards (KATS), Is measure the same as measure?

KS M ISO 4591:2007 Plastics-Film and sheeting-Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
KS E 3007-1991(2001) METHOD OF SAMPLING IRON PYRITES AND SULFUR ORES
KS E ISO 3085-2003(2018) Iron ores－Experimental methods for checking the precision of sampling, sample preparation and measurement
KS M ISO 4591-2007(2022) Plastics－Film and sheeting－Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
KS M ISO 4591-2007(2017) Plastics－Film and sheeting－Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
KS E ISO 12743:2008 Copper, lead, zinc and nickel concentrates-Sampling procedures for determination of metal and moisture content
KS E 3084-1996(2001) CHROMIUM, MANGANESE AND FERRUGINOUS MANGANESE ORES - SAMPLING AND DETERMINATION OF MOISTURE CONTENT AND SIZE DISTRIBUTION
KS I ISO 8760:2008 Work-place air－Determination of mass concentration of carbon monoxide－Method using detector tubes for short-term sampling with direct indication
KS P ISO 18153-2010(2016) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control mater
KS P ISO 18153-2010(2021) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control mater
KS A ISO 5725-1-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 1：General principles and definitions
KS A ISO 5725-1-2012(2022) Accuracy(trueness and precision) of measurement methods and results－Part 1：General principles and definitions
KS D ISO 11437-1-2012(2022) Nickel alloys－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 1：General requirements and sample dissolution
KS D ISO 11437-1-2012(2017) Nickel alloys－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 1：General requirements and sample dissolution
KS P ISO 18153:2010 In vitro diagnostic medical devices-Measurement of quantities in biological samples-Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
KS I ISO 8760:2019 Work-place air ― Determination of mass concentration of carbon monoxide ― Method using detector tubes for short-term sampling with direct indication
KS D ISO 11437-1:2012 Nickel alloys-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 1:General requirements and sample dissolution
KS F 2446-2000 Standard test method of test for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
KS F 2446-1980 Standard test method of test for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
KS A ISO 11929-4-2002(2012) Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 4：Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without
KS F 2437-2019 Standard test method for dynamic modulus of elasticity, dynamic modulus of rigidity and dynamic Poisson’s ratio of concrete specimens by forced resonance apparatus
KS B ISO 13653-2006(2021) Optics and optical instruments — General optical test methods —Measurement of relative irradiance in the image field
KS R 1021-2014 Continuous measurement method of concentration carbon monoxide, carbon dioxide and hydrocarbon in automobile exhaust gas
KS X ISO 6200-2007(2022) Micrographics－First generation silver-gelatin microforms of source documents－Density specifications and method of measurement
KS X ISO 6200-2007(2017) Micrographics－First generation silver-gelatin microforms of source documents－Density specifications and method of measurement
KS R 1021-1980 Continuous measurement method of concentration carbon monoxide, carbon dioxide and hydrocarbon in automobile exhaust gas

RO-ASRO, Is measure the same as measure?

SR ISO 4591:1996 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
SR ISO 583:1995 Conveyor belts with a textile carcass - Tolerances on total thickness and thickness of covers. Direct measurement method
STAS 8878-1972 Automatic devices UNIFIED SIGNAL TEMPERATURE MEASURING ELECTRIC TRANSDUCERS Clasification and basic parameters

British Standards Institution (BSI), Is measure the same as measure?

BS ISO 3085:2019 Iron ores. Experimental methods for checking the precision of sampling, sample preparation and measurement
BS ISO 3085:2002 Iron ores - Experimental methods for checking the precision of sampling, sample preparation and measurement
BS ISO 5725-1:1995 Accuracy (trueness and precision) of measurement methods and results. General principles and definitions
BS 3908-13:1970 Methods for the sampling and analysis of lead and lead alloys - Antimony in lead and lead alloys (low contents) (photometric method)
BS 3908-2:1967 Methods for the sampling and analysis of lead and lead alloys - Arsenic in lead and lead alloys (photometric method)
BS 3908-6:1971 Methods for the sampling and analysis of lead and lead alloys - Tellurium in lead and lead alloys (photometric method)
BS ISO 12743:2018 Copper, lead, zinc and nickel concentrates. Sampling procedures for determination of metal and moisture content
BS ISO 12743:2007 Copper, lead, zinc and nickel concentrates - Sampling procedures for determination of metal and moisture content
BS EN 13528-1:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - General requirements
BS EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
BS ISO 3951-1:2022 Tracked Changes. Sampling procedures for inspection by variables. Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
BS EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Automated pumped sampling with in situ gas chromatography
BS 3630-16:1976 Methods for the sampling and analysis of zinc and zinc alloys - Nickel in zinc alloys (photometric method)
BS EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14662-1:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN 13286-1:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
BS EN 13804:2002 Foodstuffs - Determination of trace elements - Performance criteria, general considerations and sample preparation
BS EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 14662-4:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Sampling of PCDDs/PCDFs
BS EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
BS EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 14662-5:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 14662-2:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
BS EN 60512-1-3:1997 Connectors for electronic equipment. Tests and measurements. General. Test 1c. Electrical engagement length
BS ISO 11665-4:2012 Measurement of radioactivity in the environment. Air: radon-222. Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
BS EN 13286-1:2021 Tracked Changes. Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Introduction, general requirements and sampling
BS 6075-10:1981 Methods of sampling and test for sodium hydroxide for industrial use - Determination of mercury content (photometric method)
22/30329297 DC BS ISO 5725-1. Accuracy (trueness and precision) of measurement methods and results - Part 1. General principles and definitions
BS ISO 5725-1:2023 Accuracy (trueness and precision) of measurement methods and results - General principles and definitions
BS EN ISO 2064:2000 Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness
BS EN 14211:2005 Ambient air quality - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
BS 6200-3.16.3:1991 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of lead - Steel: spectrophotometric method for trace amounts
BS PD CEN/TS 1948-5:2015 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Long-term sampling of PCDDs/PCDFs and PCBs
BS EN 14412:2004 Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
BS EN 14412:2004(2009) Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
BS 3424-25:1993 Testing coated fabrics - Method 28 - Method for determination of the coating thickness and thickness of any expanded layer
BS 598-1:2011 Sampling and examination of bituminous mixtures for roads and other paved areas. Methods for the measurement of the rate of spread of coated chippings and the temperature of bituminous mixtures using non-contact temperature-measuring devices and for the a
BS EN 1948-4:2010+A1:2013 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs
BS EN 14488-3:2006 Testing sprayed concrete - Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
BS 6075-7:1981 Methods of sampling and test for sodium hydroxide for industrial use - Determination of chloride content (photometric method)
BS EN 13040:2007(2008) Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
20/30410971 DC BS EN 13286-1. Unbound and hydraulically bound mixtures. Part 1. Test methods for laboratory reference density and water content. Introduction, general requirements and sampling
BS DD CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Sampling and analysis of dioxin-like PCBs
BS 6200-3.22.3:1986 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nitrogen. Steel: spectrophotometric method (for trace amounts)
BS EN 13205-5:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Aerosol sampler performance test and sampler comparison carried out at workplaces
BS ISO 12039:2019 Stationary source emissions. Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas. Performance characteristics of automated measuring systems
BS ISO 13653:2019 Tracked Changes. Optics and photonics. General optical test methods. Measurement of relative irradiance in the image field
BS ISO 11665-4:2021 Tracked Changes. Measurement of radioactivity in the environment. Air: radon-222. Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
BS EN 13205-6:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Transport and handling tests
BS ISO 13653:1997 Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field
BS EN 13040:2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
BS EN 13040:2008 Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
BS 6200-3.11.2:1991 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of cobalt - Steel, irons and steelmaking materials: spectrophotometric method for trace amounts
DD CEN/TS 1948-4:2007 Stationary source emissions — Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs — Part 4: Sampling and analysis of dioxin-like PCBs
BS EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
BS EN 13528-3:2003(2008) Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
22/30451002 DC BS EN 14662-1. Ambient air quality. Standard method for measurement of benzene concentrations. - Part 1. Pumped sampling followed by thermal desorption and gas chromatography
BS ISO 6200:1999 Micrographics. First generation silver-gelatin microforms of source documents. Density specifications and method of measurement
BS ISO 14968:2022 Tracked Changes. Paper and board. Cut-size office paper. Measurement of curl in a pack of sheets
BS EN 60811-201:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - General tests. Measurement of insulation thickness
22/30423088 DC BS EN ISO 4259-5. Petroleum and related products. Precision of measurement methods and results - Part 5. Statistical assessment of agreement between two different measurement methods that claim to measure the same property
BS EN 13528-2:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Specific requirements and test methods
BS EN 14211:2012 Ambient air. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence

German Institute for Standardization, Is measure the same as measure?

DIN 58963-3:1993 Optical cells for photometric measurements; disposable rectangular spectrophotometric cells; dimensions, requirements
DIN 2271-4:1977 Pneumatic Length Measurement (Air Gauging); General Information and Examples of Application
DIN EN 952:1999-11 Door leaves - General and local flatness - Measurement method; German version EN 952:1999
DIN ISO 5725-1:1997 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994)
DIN 22022-1:2014-07 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 22022-1:2014 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 22022-1:2001 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation; Preparation of samples for the analyses (dissolution method)
DIN 51718:2002 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN 25482-2 Bb.1:2000 Detection limit and decision threshold for ionizing radiation measurements - Part 2: Counting measurements by spectrometry, neglecting the influence of sample treatment; comments and examples
DIN EN 13528-1:2002-12 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements; German version EN 13528-1:2002
DIN ISO 3951-1:2023-10 Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2022); Text in German...
DIN ISO/TS 14253-3:2008 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO/TS 14253-3:2002); German version CEN ISO/TS 14253-3:2007
DIN EN 13205-1:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements; German version EN 13205-1:2014
DIN EN ISO 2064:2000 Metallic and other non-organic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996); German version EN ISO 2064:2000
DIN EN 13286-1:2020 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling; German and English version prEN 13286-1:2020
DIN EN 13286-1:2022-01 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling; German version EN 13286-1:2021
DIN 16894:2011-04 Pipes of crosslinked medium density polyethylene (PE-MDX) - General quality requirements and testing
DIN EN 13040:2008 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density; English version of DIN EN 13040:2008-01
DIN EN 14662-4:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
DIN EN 14662-1:2022-09 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German and English version prEN 14662-1:2022 / Note: Date of issue 2022-07-29*Intended as r...
DIN EN 14662-1:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005 / Note: To be replaced by DIN EN 14662-1 (2022-09).
DIN EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs English version of DIN EN 1948-1:2006-06
DIN ISO 5725-1:1997-11 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994)
DIN EN 14662-2:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography; German version EN 14662-2:2005
DIN EN 14662-5:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography; German version EN 14662-5:2005
DIN EN 13040:2008-01 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density; German version EN 13040:2007
DIN EN ISO 18153:2003-11 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003); German version EN ISO 181...
DIN EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
DIN EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005
DIN EN ISO 14253-3:2011-10 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011); German version EN ISO 14253-3:2011
DIN EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
DIN EN 1948-1:2006-06 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs; German version EN 1948-1:2006
DIN ISO/TS 22475-3:2008 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party (ISO/TS 22475-3:2007); German version CEN ISO/TS 22475-3:2007
DIN EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography; German version EN 14662-2:2005
DIN EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography; German version EN 14662-5:2005
DIN EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
DIN ISO 11665-4:2013 Measurement of radioactivity in the environment - Air: radon-222 - Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis (ISO 11665-4:2012)
DIN EN 13528-1:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements; German version EN 13528-1:2002
DIN EN 14412:2004-12 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
DIN EN 13205-6:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests; German version EN 13205-6:2014
DIN EN ISO 4259-5:2022-11 Petroleum and related products - Precision of measurement methods and results - Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property (ISO/DIS 4259-5:2022); German and English vers...
DIN 43802-2:1991 Line scales and pointers for indicating electrical measuring instruments; general requirements
DIN EN 62132-1 Berichtigung 1:2007 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 1: General conditions and definitions (IEC 62132-1:2006); German version EN 62132-1:2006, Corrigenda to DIN EN 62132-1:2006-06; CENELEC-Corrigendum November 2006 to EN
DIN EN 13205-5:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces; German version EN 13205-5:2014
DIN CEN/TS 1948-5:2015-06*DIN SPEC 33970:2015-06 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs; German version CEN/TS 1948-5:2015
DIN EN 13286-1:2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content; introduction and general requirements and sampling; German version EN 13286-1:2003
DIN EN 13286-1:2022 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling; German version EN 13286-1:2021
DIN EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance; German version EN 13528-3:2003
DIN EN 13528-3:2004-04 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance; German version EN 13528-3:2003
DIN EN 13528-2:2002-12 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods; German version EN 13528-2:2002
DIN ISO 11665-4:2021 Measurement of radioactivity in the environment - Air: radon-222 - Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis (ISO 11665-4:2020)
DIN EN 14211:2012-11 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence; German version EN 14211:2012 / Note: To be replaced by DIN EN 14211 (2022-11).
DIN EN 14211:2022-11 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence; German and English version prEN 14211:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14211 ...
DIN 38409-10:1980-07 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by mass concentration in water and waste water (H10)
DIN EN 1948-4:2014-03 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs; German version EN 1948-4:2010+A1:2013
DIN EN ISO 787-4:2018 General methods of test for pigments and extenders - Part 4: Determination of acidity or alkalinity of the aqueous extract (ISO 787-4:1981)
DIN CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs; German version CEN/TS 1948-4:2007

Japanese Industrial Standards Committee (JISC), Is measure the same as measure?

JIS M 8708:2005 Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement
JIS M 8708:2021 Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement
JIS M 8108:2008 Chromium, manganese and ferruginous manganese ores -- Sampling, sample preparation and determination of moisture content and size distribution

BELST, Is measure the same as measure?

STB 17.13.05-49-2021 Еnvironmental pгоtесtion аnd nature use. Sampling and measurements, monitoring. Water quality. Determination of the mass concentration of nitrogen-containing substances using photometric tests
STB 17.13.05-48-2020 Еnvironmental pгоtесtion and nature use. Sampling, measurments and monitoring. Ambient air. Determination of mass concentration of chlorine in emissions into the аmbient air from stationary sources
STB 8062-2016 System for ensuring uniformity of measurements of the Republic of Belarus. Measures of coefficients of directed transmittance, diffuse and specular reflections, optical density, color coordinates and chromaticity. Methods of verification
STB 8089-2021 System for ensuring the uniformity of measurements of the Republic of Belarus. Bimetal thermometers. Methods of verification

RU-GOST R, Is measure the same as measure?

GOST 938.15-1970 Leather. Method of measuring thickness of samples and thicknes of leather in the standard point
GOST 8.362-1979 State system for ensuring the uniformity of measurement. Coating thickness measurement. Terms and definitions
GOST 8.576-2001 State system for ensuring the uniformity of measurements. State verification schedule for means measuring flux, flux density and fluence of electrons, energy flux, energy flux density and fluence of energy of electrons and bremsstrahlung radiation
GOST R EN 13528-1-2010 Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Part 1. General requirements
GOST 17073-1971 Artifical leather. Methods for the determination of thickness and mass of 1 sq m
GOST R 52728-2007 Method of strain-and-temperature measurements in situ. General requirements
GOST R 8.913-2016 State system for ensuring the uniformity of measurements. Satellite laser ranging systems. Accuracy and measurement uncertainty. Standardized metrological characteristics
GOST R 8.734-2011 State system for ensuring the uniformity of measurements. Intelligent sensors and intelligent measuring systems. Methods of metrological self-checking
GOST R 8.613-2013 State system for ensuring the uniformity of measurements. The procedures (methods) of measurements of structure and properties of water samples. General requirements to development
GOST R ISO 5725-4-2002 Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
GOST 8.471-1982 State system for ensuring the uniformity of measurements. Machines for textile web lengths measuring. Methods and means of verification
GOST R 8.759-2011 State system for ensuring the uniformity of measurements. Measurement of irradiance and dose ultraviolet radiation in photobiology. Procedure of measurements
GOST 8.595-2010 State system for ensuring the uniformity of measurements. Density and volume of petroleum. The tables of factors for recalculation of density and mass
GOST R 8.599-2003 State system for ensuring the uniformity of measurements. Density and volume of oil. The tables of factots for recalculation of density and mass
GOST R 8.878-2014 State system for ensuring the uniformity of measurements. Nuclear material control and accounting. System of measurements. Estimation of uncertainty in the sampling
GOST 8.030-2013 State system for ensuring the uniformity of measurements. State hierarchy scheme for means measuring magnetic flux density, magnetic flux, magnetic moment and gradient of magnetic flux density
GOST R 54233-2010 Solid recovered fuels. Determination of moisture content using the oven dry method. Part 3. Moisture in general analysis sample
GOST 12787-1981 Methods for determination of spirit, actual extract and estimation of dry substances in the initial must
GOST R 8.699-2010 State system for ensuring the uniformity of measurements. Quantities, units, scales of measurement, which are used in global navigation satellite system
GOST 2388-1970 Selenium photocells for photometric and colorimetric measurement of pirotechnical agents. General technical requirements
GOST 14017-1968 State system for ensuring the uniformity of measurements. Force-measuring standard machines of 2 grade. Methods and means of verification
GOST R 8.737-2011 State system for ensuring the uniformity of measurements. Geophysical well logging and petrophysical study of rock, fluids and gas samples. Units of measured quantities
GOST 8.654-2016 State system for ensuring the uniformity of measurements. Photometry. Terms and definitions
GOST 8.369-1979 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring mass flow of gas within the range of 4x10 in minus 2 degree up to 2,5x10 in 2 degree kg/sec
GOST 15961-1989 Metal forging machines. General requirements for conditions and methods of accuracy measuring
GOST R 8.850-2013 State system for ensuring the uniformity of measurements. Characterization of the performance of illuminance meters and brightness meter. General
GOST R 8.845-2013 State system for ensuring the uniformity of measurements. Air ion composition measurements. Method of measuring volume density of electric charge of air and air ion concentration using aspiration capacitor
GOST R 8.836-2013 State system for ensuring the uniformity of measurements. Measurement of radiance and radiant intensity in the wavelength range 120-400 nm. Procedure of measurements
GOST R ISO 5725-5-2002 Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method
GOST R 52716-2007 Work-place air. Determination of mass concentration of carbon monoxide. Method using detector tubes for short-term sampling with direct indication
GOST 25177-1982 Standard coating thickness measures main parameters and dimensions. General technical requirements
GOST 8.205-2014 State system for ensuring the uniformity of measurements. State verification schedule for measurement means of tristimulus values, chromaticity coordinates, index whiteness and gloss
GOST R 8.907-2015 State system for ensuring the uniformity of measurements. State verification schedule for means measuring on Martens scales hardness and indentation scales hardness
GOST ISO 18153-2011 In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of assigned values for catalytic concentration of enzymes in calibrators and control materials
GOST 8.195-2013 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring spectral density of radiance, spectral density of radiant intensity, spectral density of irradiance, radiant intensity and irradiance in the wavel
GOST 25932-1983 Portable radioisotope soil and concrete moisture and density gauges. General specifications
GOST R 8.581-2001 State system for ensuring the uniformity of measurements. Air-heat installations for measuring moisture of cereals and cereal products. Verification procedure
GOST 8.475-1982 State system for ensuring the uniformity of measurements. Standard noise figure and equivalent noise temperature of amplifiers and receivers. Measurement procedure
GOST 8.609-2012 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring of impulse electric and magnetic field strengths with duration of edges up to 20 ps
GOST R 8.829-2013 State system for ensuring the uniformity of measurements. Method for the determination of optical density (transmittance coefficient) and haze of polymeric plates and films
GOST R EN 13528-2-2010 Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. Part 2. Specific requirements and test methods
GOST R 8.624-2006 State system for ensuring the uniformity of measurements. Platinum, copper and nickel resistance thermometers. Verification methods
GOST 8.592-2009 State system for ensuring the uniformity of measurements. Single-crystal silicon nanometer range relief measures. Geometrical shapes, linear size and manufacturing material requirements
GOST R 8.863-2013 State system for ensuring the uniformity of measurements. Insruments for measurement power and irradiance in the wavelength range from 10 to 30 nm. Verification procedure
GOST R ISO 6507-4-2009 State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 4. Tables of hardness values
GOST R 8.826-2013 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the amplitude of the ultrasonic displacement and the particle velocity of the surface of the solid bodies
GOST 8.078-1979 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule of the equipment for means of measuring temperature with in the range 1,5-4,2 k
GOST 8.547-1986 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring relative humidity of gases
GOST 8.426-1981 State system for ensuring the uniformity of measurements. Shere rebound hardness testing machines. Methods and means of verification
GOST 8.492-1983 State system for ensuring the uniformity of measurements. Actual low precision of frequency. Methods and means of verification
GOST R IEC 60891-2013 State system for ensuring the uniformity of measurements. Photovoltaic devices. Procedures for temperature and irradiance corrections to measured current voltage characteristics
GOST R 8.756-2014 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the propagation velocities of longitudinal, shear and surface ultrasonic waves in solids
GOST R IEC 61391-2-2012 State system for ensuring the uniformity of measurements. Medical ultrasonic diagnostic equipment. General requirements to methods of measurement of maximum depth of penetration and local dynamic range
GOST 8.342-1979 State system for ensuring the uniformity of measurements. Hole gauges graduated in 0,001 and 0,002mm. Methods and means of verifcation
GOST R 8.800-2012 State system for ensuring the uniformity of measurements. State primary standart and state verification schedule for means measuring vibration displacement, vibration velocity and vibration acceleration over the frequency range from 1·10 -1 to 2·10 4 Hz
GOST R 8.815-2013 State system for ensuring the uniformity of measurements. Secondary standarts of the units of length, velocity and acceleration by vibration of a solid body. Technique of comparisons
GOST R 8.854-2013 State system for ensuring the uniformity of measurements. Standard platinum and rhodium-iron resistance thermometers. Methods of calibration
GOST 8.427-1981 State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers. Methods and means of calibration
GOST R 8.582-2001 State system for ensuring the uniformity of measurements. NMR-analyzers for determination of oiliness and moisture of agricultural materials. Verification procedures
GOST 13196-1993 Devices for automation of tank farms. Means for level measurement and sampling of oil products. General technical requirements and test methods
GOST 13196-1985 Tank contents sampling units for crude oil and petrolium products(permanent installation type). Types and basic parameters. General technical requirements
GOST R 8.872-2014 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring specific enthalpy and specific heat-conguction of solid frames in the range of temperature from 700 to 1800 K
GOST R 8.696-2010 State system for ensuring the uniformity of measurements. Interplanar spacings in crystals and the intensity distribution in diffraction patterns. Method for measurement by means of an electron diffractometer
GOST R 8.698-2010 State system for ensuring the uniformity of measurements. Dimensional parameters of nanoparticles and thin films. Method for measurement by means of a small angle X-ray scattering diffractometer
GOST 8.098-1973 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring electric intensity within frequency range 0,15-30 mnz
GOST R IEC 62555-2015 State system for ensuring the uniformity of measurements. Ultrasonic power in liquids. General requirements to measurement methods of therapeutic transducers and systems with high intensity
GOST R 8.781-2012 State system for ensuring the uniformity of measurements. Moisture meters of grain and grain processing products. Verification procedure
GOST 8.461-2009 State system for ensuring the uniformity of measurements. Platinum, copper and nickel resistive temperature transducers. Verification methods
GOST R 8.747-2011 State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 3. Salibration of reference block
GOST 22466.0-1982 Gaseous discharge sources of high-intensity optical radiation. Methods for measuring the electrical and luminous parameters. General rules
GOST 8.461-1982 State system for ensuring the uniformity of measurements. Resistive temperature transducers. Methods and means of calibration

International Organization for Standardization (ISO), Is measure the same as measure?

ISO 4591:1979 Plastics — Film and sheeting — Determination of average thickness of a sample and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
ISO 4591:1992 Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
ISO 3085:2019 Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement
ISO 6442:2005 Door leaves - General and local flatness - Measurement method
ISO 3727:1977 Butter; Determination of water, solids-not-fat and fat contents on the same test portion (Reference method)
ISO 12743:2006 Copper, lead, zinc and nickel concentrates - Sampling procedures for determination of metal and moisture content
ISO 12743:2018 Copper, lead, zinc and nickel concentrates - Sampling procedures for determination of metal and moisture content
ISO 12743:2021 Copper, lead, zinc and nickel concentrates - Sampling procedures for determination of metal and moisture content
ISO/TS 14253-3:2002 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements
ISO 8760:1990 Work-place air — Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication
ISO/FDIS 5725-1 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
ISO 5725-1:2023 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
ISO 14253-3:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements
ISO 2064:1996 Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness
ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials
ISO 11665-4:2021 Measurement of radioactivity in the environment - Air: radon-222 - Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
ISO 11437-1:1994 Nickel alloys - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Part 1: General requirements and sample dissolution
ISO 7077:1981 Measuring methods for building; General principles and procedures for the verification of dimensional compliance
ISO 14968:2022 Paper and board — Cut-size office paper — Measurement of curl in a pack of sheets
ISO 25597:2013 Stationary source emissions - Test method for determining PM<(Index)2,5> and PM<(Index)10> mass in stack gases using cyclone samplers and sample dilution
ISO/TS 22475-3:2007 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party
ISO 11665-4:2012 Measurement of radioactivity in the environment — Air: radon-222 — Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
ISO 8760:1990/cor 1:2009 Work-place air - Determination of mass concentration of carbon monoxide - Method using detector tubes for short-term sampling with direct indication; Technical Corrigendum 1
ISO 11665-4:2020 Measurement of radioactivity in the environment — Air: radon-222 — Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
ISO/DIS 4259-5 Petroleum and related products — Precision of measurement methods and results — Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property
ISO/FDIS 4259-5:2023 Petroleum and related products — Precision of measurement methods and results — Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property
ISO 13653:2019 Optics and photonics — General optical test methods — Measurement of relative irradiance in the image field

ZA-SANS, Is measure the same as measure?

SANS 4591:2003 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
SANS 2064:1980 Metallic and other non-organic coatings - Definitions and conventions concerning the measurement of thickness

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Is measure the same as measure?

GB/T 20220-2006 Plastic.Film and sheeting.Determination of average thickness of a sample,and average thickness and yield of a roll,by gravimetric techniques (gravimetric thickness)
GB/T 17418.5-1998 Methods for analysis of noble metals in geochemical samples--Determination of ruthenium and osmium content-Separation by distillation-Catalytic spectrophotometric method
GB 11299.5-1989 Satellite Communication Earth Station Radio Equipment Measurement Methods Part 1 General Measurements for Subsystems and Subsystem Combinations Section 5 Noise Temperature Measurement
GB/T 12334-2001 Metallic and other inorganic coatings--Definitions and conventions concerning the measurement of thickness
GB/T 17418.5-2010 Methods for analysis of noble metals in geochemical samples.Part 5:Determination of ruthenium and osmium content.Separationby distillation-catalytic spectrophometric method

Association Francaise de Normalisation, Is measure the same as measure?

FD X15-111:2004 Mesure de l'humidité de l'air - Généralités sur les instruments de mesure - Guide de choix et d'utilisation
NF EN 952:2000 Vantaux de portes - Planéités générale et locale - Méthode de mesure
NF V04-392:1995 BUTTER. DETERMINATION OF WATER, SOLIDS-NOT-FAT AND FAT CONTENTS ON THE SAME TEST PORTION (REFERENCE METHOD). (EUROPEAN STANDARD EN ISO 3727).
NF G07-108:1986 Textiles. Determination of the heat retention of materials by measurement of the thickness and mass of specimens.
FD M60-821:2010 Nuclear energy - General considerations about the sampling and the measurements of radioactive effluents
NF E11-018:1996 Geometrical product specification (gps). Length measuring instruments. Calibraiton specimens for thread measurement. Plugs and rings with groove.
NF EN 13528-1:2003 Qualité de l'air - Echantillonneurs par diffusion pour la détermination des concentrations des gaz et des vapeurs - Prescriptions et méthodes d'essai - Partie 1: prescriptions générales
NF EN 12697-28:2020 Mélanges bitumineux - Méthodes d'essai - Partie 28 : préparation des échantillons pour la détermination de la teneur en liant, de la teneur en eau et de la granularité
NF ISO 8760:1990 Air des lieux de travail - Détermination de la concentration en masse du monoxyde de carbone - Méthode utilisant des tubes détecteurs pour échantillonnage rapide à lecture directe.
FD X07-022:2004 Métrologie et applications de la statistique - Utilisation des incertitudes de mesures : présentation de quelques cas et pratiques usuelles
NF ISO 25597:2014 Émissions de sources fixes - Méthode d'essai pour la détermination de la concentration en masse de PM 2,5 et PM 10 dans les gaz émis à la cheminée en utilisant des échantillonneurs cyclone et une dilution d'échantillon
NF X43-060-1*NF EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1 : general requirements
NF M60-763-4*NF ISO 11665-4:2021 Measurement of radioactivity in the environment - Air : radon-222 - Part 4 : integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
NF EN 14662-5:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration de benzène - Partie 5 : prélèvement par diffusion suivi d'une désorption au solvant et d'une chromatographie gazeuse
NF EN 14662-2:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 2 : prélèvement par pompage suivi d'une désorption au solvant et d'une méthode de chromatographie en phase gazeuse
NF E11-200:1986 Length measuring instruments in use. Maintenance and downgrading. General rules.
NF EN 14662-1:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 1 : échantillonnage par pompage suivi d'une désorption thermique et d'une méthode chromatographie en phase gazeuse
NF EN 50470-1:2007 Équipement de comptage d'électricité (c.a.) - Partie 1 : prescriptions générales, essais et conditions d'essai - Équipement de comptage (classes de précision A, B et C)
NF EN 50470-1/A1:2018 Equipement de comptage d'électricité (c.a.) Partie 1 : prescriptions générales, essais et conditions d'essai - Equipement de comptage (classes de précision A, B et C)
NF ISO 11665-4:2021 Mesurage de la radioactivité dans l'environnement - Air : radon-222 - Partie 4 : méthode de mesure intégrée pour la détermination de l'activité volumique moyenne du radon avec un prélèvement passif et une analyse en différé
NF X43-254*NF ISO 8760:1990 Work-place air. Determination of mass concentration of carbon monoxide. Method using detector tubes for short-term sampling with direct indication.
NF X43-029-2*NF EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : pumped sampling followed by solvent desorption and gas chromatography
NF S10-045*NF ISO 13653:2019 Optics and photonics - General optical test methods - Measurement of relative irradiance in the image field
NF EN ISO 18153:2004 Dispositifs médicaux de diagnostic in vitro - Mesurage des grandeurs dans des échantillons d'origine biologique - Traçabilité métrologique des valeurs de concentration catalytique des enzymes attribuées aux agents d'étalonnage et aux matériau...
NF M60-766:2012 Measurement of radioactivity in the environment - Air : radon-222 - Part 4 : integrated measurement method for determining average activity concentration using passive sampling and delayed analysis.
NF X43-029-5*NF EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5 : diffusive sampling followed by solvent desorption and gas chromatography.
NF EN 13205-1:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 1 : exigences générales
NF C96-261-1*NF EN 62132-1:2016 Integrated circuits - Measurement of electromagnetic immunity - Part 1 : general conditions and definitions
NF ISO 4112:1991 Céréales et légumineuses - Directives générales pour le mesurage de la température des grains entreposes en vrac dans les installations de stockage
NF X43-063*NF EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentration of gases and vapours - Guide for selection, use and maintenance
NF ISO 13653:2019 Optique et photonique - Méthodes générales d'essai optique - Méthode de mesure de l'éclairement énergétique relatif dans le champ image
NF X43-324-1*NF EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1 : sampling of PCDDs/PCDFs
NF EN 1948-1:2006 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 1 : prélèvement des PCDD/PCDF
NF EN 14662-4:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 4 : échantillonnage par diffusion suivi d'une désorption thermique et d'une chromatographie en phase gazeuse
NF X34-210-3:2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3 : moisture in general analysis sample.
NF EN 13040:2007 Amendements organiques et supports de culture - Préparation des échantillons pour les essais physiques et chimiques, détermination de la teneur en matière sèche, du taux d'humidité et de la masse volumique compactée en laboratoire
NF X43-324-4/IN1*NF EN 1948-4/IN1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4 : sampling and analysis of dioxin-like PCBs
NF EN 14412:2004 Qualité de l'air intérieur - Échantillonnage par diffusion pour la détermination de la concentration des gaz et des vapeurs - Guide pour la sélection, l'utilisation et la maintenance
NF S92-022*NF EN ISO 18153:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials.
NF X43-029-4*NF EN 14662-4:2005 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 4 : diffusive sampling followed by thermal desorption and gas chromatography
NF M60-766:2020 Measurement of radioactivity in the environment - Air : radon-222 - Part 4 : Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
NF C96-261-1:2006 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 1 : general conditions and definitions.
XP X43-324-5*XP CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5 : long-term sampling of PCDDs/PCDFs and PCBs
XP CEN/TS 1948-5:2015 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 5 : prélevement à long terme de PCDD/PCDF et PCB
NF P18-511-3*NF EN 14488-3:2006 Testing sprayed concrete - Part 3 : flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
NF U44-306*NF EN 13040:2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density.
NF EN 13286-1:2021 Mélanges traités et mélanges non traités aux liants hydrauliques - Méthode d'essai de détermination en laboratoire de la masse volumique de référence et de la teneur en eau - Partie 1 : introduction, exigences générales et échantillonnage
NF X43-283-5*NF EN 13205-5:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5 : aerosol sampler performance test and sampler comparison carried out at workplaces
NF EN 13528-2:2003 Qualité de l'air ambiant - Échantillonneurs par diffusion pour la détermination des concentrations des gaz et des vapeurs - Exigences et méthodes d'essai - Partie 2 : exigences spécifiques et méthodes d'essai
NF X43-269:2017 Qualité de l'air - Air des lieux de travail - Prélèvement sur filtre à membrane pour la détermination de la concentration en nombre de fibres par les techniques de microscopie : MOCP, MEBA et META - Comptage par MOCP
NF S10-045:1999 Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field.
NF EN 14211:2012 Air ambiant - Méthode normalisée pour le mesurage de la concentration en dioxyde d'azote et monoxyde d'azote par chimiluminescence
NF X43-324-4*NF EN 1948-4+A1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4 : sampling and analysis of dioxin-like PCBs
NF EN 1948-4/IN1:2014 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 4 : prélèvement et analyse des PCB de type dioxine
NF EN 1948-4+A1:2014 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 4 : prélèvement et analyse des PCB de type dioxine
NF X43-061*NF EN 14211:2012 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence.
NF EN 13205-6:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 6 : essais de manipulation et de transport

API - American Petroleum Institute, Is measure the same as measure?

API RP 2529-1968 Recommended Practice for Measuring@ Sampling@ and Testing Natural Gas Fluids (FIRST EDITION)
API MPMS 13.1 ERTA-2013 Manual of Petroleum Measurement Standards Chapter 13 - Statistical Aspects of Measuring and Sampling Section 1 - Statistical Concepts and Procedures in Measurement (First Edition)
API MPMS 13.1-1985 Manual of Petroleum Measurement Standards Chapter 13 - Statistical Aspects of Measuring and Sampling Section 1 - Statistical Concepts and Procedures in Measurement (First Edition)
API STD 2500-1955 MEASURING@ SAMPLING@ AND TESTING CRUDE OIL Part V-Automatic Line Samplers (FIRST EDITION; SUPP 1: October 1956)
API MPMS 8.4-1995 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Manual Sampling and Handling of Fuels for Volatility Measurement (First Edition; ASTM D5842)
API MPMS 22.4-2018 Manual of Petroleum Measurement Standards@ Chapter 22.4 Testing Protocol for Pressure@ Differential Pressure@ and Temperature Measuring Devices (FIRST EDITION)
API MPMS 5.5-1982 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems First Edition (R 1992)
API MPMS 13.2-1994 Manual of Petroleum Measurement Standards Chapter 13 - Statistical Aspects of Measuring and Sampling Section 2 - Methods of Evaluating Meter Proving Data (FIRST EDITION; ERTA: October 2015)
API MPMS 8.3-1995 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products (First Edition; ASTM D5854)
API MPMS 8.2-1983 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products (First Edition; ASTM D4177)
API MPMS 17.6-1994 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 6 - Guidelines for Determining the Fullness of Pipelines between Vessels and Shore Tanks (First Edition)
API MPMS 17.11-2009 API Manual of Petroleum Measurement Standards Chapter 17.11 EI Hydrocarbon Management HM 52 Measurement and sampling of cargoes on board tank vessels using closed and restricted equipment (First Edition)
API MPMS 8.3 ERTA-1996 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products Errata (First Edition)
API MPMS 11.1 VOL XI/XII-1982 Petroleum Measurement Tables Intraconversion between Volume Measures and Density Measures; Volume XI - Tables 1@ 2@ 3@ 4@ 8@ 9@ 10@ 11@ 12@ 13@ and 14 Volume XII - Tables 21@ 22@ 26@ 27@ 28@ 29@ 30@ 31@ 33@ 34@ 51@ 52@ 56@ 57@ and 58 (ASTM D1250; IP 200;

PL-PKN, Is measure the same as measure?

PN J80010-1973 Photometric dosimeters of X and gamma radiation General re?uirements and methods of testing
PN A75101-08-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of total ash content and its alkalinity
PN Z04111-03-1989 Air purity protection "Microbiological testings Determination number of the fungi in the atmospheric air (imision) wiht sampling by aspiration and sedimentation method
PN Z04111-02-1989 Air purity protection Microbiological testings Determination number of bacteria in the atmospheric air (imision) with sampling by aspiration and sedimentation method

PH-BPS, Is measure the same as measure?

PNS ISO 6442:2021 Door leaves - General and local flatness - Measurement method

ES-AENOR, Is measure the same as measure?

UNE 4 008

ES-UNE, Is measure the same as measure?

UNE-EN 952:2000 Door leaves - General and local flatness - Measurement method
UNE-EN 13286-1:2022 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
UNE-EN 62132-1:2016 Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions (Endorsed by AENOR in April of 2016.)

European Committee for Standardization (CEN), Is measure the same as measure?

EN ISO 3727:1995 Butter - Determination of Water, Solids-not-Fat and Fat Contents on the Test Portion (Reference Method) (ISO 3727 : 1977)
EN ISO 14253-3:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
EN 13804:2002 Foodstuffs - Determination of Trace Elements - Performance Criteria, General Considerations and Sample Preparation
EN 13528-1:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements
EN ISO 2064:1994 Metallic and Other Non-Organic Coatings - Definitions and Conventions Concerning the Measurement of Thickness (ISO 2064 : 1980)
EN 14662-3:2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
EN 14662-3:2015 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
EN 13286-1:2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content; Introduction, general requirements and sampling
prEN 13286-1-2020 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials ISO 18153:2003
EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
EN ISO 2064:2000 Metallic and Other Inorganic Coatings - Definitions and Conventions Concerning the Measurement of Thickness ISO 2064: 1996
EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography
CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs
EN 13040:2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
EN 13040:1999 Soil Improvers and Growing Media - Sample Preparation for Chemical and Physical Tests, Determination of Dry Matter Content, Moisture Content and Laboratory Compacted Bulk Density
EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
EN 1948-1:1996 Stationary Source Emissions - Determination of the Mass Concentration of PCDDs/PCDFs - Part 1: Sampling
prEN ISO 4259-5 Petroleum and related products - Precision of measurement methods and results - Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property (ISO/DIS 4259-5:2022)
PD CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
EN 13205-6:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests
PD CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs
EN 14211:2012 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
prEN 14211 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence

Standard Association of Australia （SAA）, Is measure the same as measure?

AS 3586.4:1995 Ferroalloys - Sampling - Determination of quality variation, precision and bias
AS 4323.1:2021 Stationary source emissions, Method 1: Selection of sampling positions and measurement of velocity in stacks
AS 3580.7.1:1992 Methods for sampling and analysis of ambient air - Determination of carbon monoxide - Direct-reading instrumental method
AS 1289.6.4.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore
AS 1289.6.4.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water p

SE-SIS, Is measure the same as measure?

SIS SS-ISO 8760:1990 Work-place air — Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication

Professional Standard - Agriculture, Is measure the same as measure?

空气和废气监测分析方法 5.1.4-2003 Chapter 5 Pollution Source Monitoring Chapter 1 Sampling 4 Emission Concentration Calculation of Emissions

VN-TCVN, Is measure the same as measure?

TCVN 5754-1993 Work place air.Methods for determination of mass concentration of toxic gases and vapours.General sampling methods
TCVN 6910-1-2001 Accuracy (trueness and precision) of measurement methods and results.Part 1: General principles and definitions

Canadian Standards Association (CSA), Is measure the same as measure?

CAN/CSA-CISPR 16-2-3-2012 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements (First Edition)
CAN/CSA-CEI/IEC 61000-4-27:2001 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test (First Edition)
CAN/CSA-CEI/IEC 61000-4-9:2002 Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test (First Edition)
CAN/CSA-CEI/IEC 61000-4-14:2001 Electromagnetic Compatibility (EMC) - Part 4-14: Testing and Measurement Techniques - Voltage Fluctuation Immunity Test (First Edition)
CAN/CSA-IEC 61000-4-18:2014 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (First Edition)
CSA IEC 61000-4-3-01-CAN/CSA:2001 Electromagnetic Compatibility (EMC) - Part 4-3: Testing and Measurement Techniques - Radiated, Radio-Frequency, Electromagnetic Field Immunity Test First Edition
CAN/CSA-CEI/IEC 61000-4-28:2001 Electromagnetic Compatibility (EMC) - Part 4-28: Testing and Measurement Techniques - Variation of Power Frequency, Immunity Test (First Edition)
CAN/CSA-CEI/IEC CISPR 20:2008 Sound and television broadcast receivers and associated equipment – Immunity characteristics – Limits and methods of measurement (First Edition)

AT-ON, Is measure the same as measure?

ONORM DIN 10322-1993 Determination of water content, solids-not-fat and fat contents of butter on the same test portion - Reference method
ONORM M 9418-2001 Automatic concentration measuring instruments for carbon monoxide in garages - Specifications and testing

PT-IPQ, Is measure the same as measure?

NP 2211-1986

AENOR, Is measure the same as measure?

UNE-ISO 4591:2010 Plastics -- Film and sheeting -- Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
UNE-EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements
UNE-EN 14662-4:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
UNE-EN 14662-1:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
UNE-EN 13286-1:2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
UNE 82009-1:1998 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 1: GENERAL PRINCIPLES AND DEFINITIONS.
UNE-EN 13205-1:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
UNE-EN 14662-2:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography
UNE-EN 14662-5:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
UNE-EN 13040:2008 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
UNE-EN ISO 18153:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
UNE-EN 1948-1:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
UNE-EN 14412:2005 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
UNE 40210:1973 SAMPLING METHOD FOR A GREAT QUANTITY OF WOOL IN WOOLING WASTE TO DETERMINE THE DIAMETER OF FIBRES AND OR ITS LENGTH.
UNE-EN 13205-5:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
UNE-EN 13528-2:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods
UNE-EN ISO 787-10:1996 GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 10: DETERMINATION OF DENSITY. PYCNOMETER METHOD. (ISO 787-10:1993).
UNE-EN 1948-4:2011+A1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
UNE-EN 13205-6:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests
UNE-EN ISO 787-11:1996 GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 11: DETERMINATION OF TAMPED VOLUME AND APPARENT DENSITY AFTER TAMPING. (ISO 787-11:1981).
UNE-EN 14211:2013 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence

Lithuanian Standards Office , Is measure the same as measure?

LST EN 13804-2002 Foodstuffs - Determination of trace elements - Performance criteria, general considerations and sample preparation
LST EN 13528-1-2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements
LST EN 14662-1-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography
LST EN 14662-4-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
LST EN 13286-1-2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
LST EN 14662-2-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography
LST EN 14662-5-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
LST EN 13040-2008 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
LST EN ISO 18153:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
LST ISO 5725-1+AC:2002 Accuracy (trueness and precision) of measurement methods and results. Part 1: General principles and definitions (identical ISO 5725-1:1994)
LST EN 1948-1-2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
LST EN 14412-2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
LST EN 13528-2-2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods
LST EN ISO 787-10:2002 General methods of test for pigments and extenders - Part 10: Determination of density - Pycnometer method (ISO 787-10:1993)
LST EN 1948-4-2011 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
LST EN 14211-2012 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence

未注明发布机构, Is measure the same as measure?

DIN EN 14211:2005 Air quality — measurement method for determining the concentration of nitrogen dioxide and nitrogen monoxide using chemiluminescence
BS EN 1948-1:2006(2019) Stationary source emissions - Determination of the mass concentration of PCDDs / PCDFs and dioxin - like PCBs Part 1 : Sampling of PCDDs / PCDFs
BS 1902-3.2:1981(2011) Methods of testing Refractory materials — Part 3 : General and textural properties — Section 3.2 Measurement of dimensions of specimens for testing (methods 1902 - 302)
ISO 25597:2013/Cor 1:2015 Stationary Source Emissions. Technical Corrigendum 1 for Test Method for Determination of PM and PM Mass in Stack Waste Using Cyclone Samples and Sample Concentration Dilutions

GOSTR, Is measure the same as measure?

GOST R 8.971-2019 State system for ensuring the uniformity of measurements. Light-emitting diode (LED) lamps, luminaires and modules. Methods of photometric and colorimetric characteristics measurement
GOST R ISO 5-2-2019 State system for ensuring the uniformity of measurements. Photography and graphic technology. Density measurements. Part 2. Geometric conditions for transmittance density
GOST 8.599-2010 State system for ensuring the uniformity of measurements. Density of light petroleum products. The tables for recalculation of density to 15 °С and 20 °С and to conditions of volume's measurement
GOST 8.657-2016 State system for ensuring the uniformity of measurements. Pulse photometry. Terms and definitions
GOST R 8.982-2019 State system for ensuring the uniformity of measurements. Standard reference data. Titanium alloys of VT Brend. Speed of sound, relative temperature expansion, density and Young's modulus in the temperature range from 20 °С to 800 °С
GOST R 8.969-2019 State system for ensuring the uniformity of measurements. Metals and alloys. Leeb hardness test. Part 1: Test method

Danish Standards Foundation, Is measure the same as measure?

DS/EN 24829-1:1991 Steel and cast iron. Determination of total silicon content. Reduced molybdosilicate spectrophotometric method. Part 1: Silicon contents between 0.05 and 1,0 %
DS/EN 24829-2:1991 Steel and cast iron. Determination of total silicon content. Reduced molybdosilicate spectrophotometric method. Part 2: Silicon contents between 0.01 og 0.05 %
DS/ISO 5725-1:1995 Accuracy (trueness and precision) of measurement methods and results- Part 1: General principles and definitions
DS/EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements
DS/ISO 5725-1/Cor.1:2000 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
DS/EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
DS/EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
DS/ISO 4946:1991 Steel and cast iron. Determination of copper content. 2,2'. Diquinolyl spectrophotometric method
DS/EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography
DS/EN 13286-1:2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
DS/EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
DS/EN 13040:2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
DS/EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
DS/EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
DS/EN 13528-2:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods
DS/EN 1948-4:2011 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
DS/EN 62132-1:2006 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 1: General conditions and definitions
DS/EN 14211:2012 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence

CU-NC, Is measure the same as measure?

NC 23-33-1987 General Chemical Tests. "Benzoyl" Peroxide. Determination of Purity and Active Oxigen Content

Society of Automotive Engineers (SAE), Is measure the same as measure?

SAE J/ISO 9248-2003 Earth-moving machinery Units for dimensions, performance and capacities, and their measurement accuracies Identical to ISO 9248:1992

American Society for Testing and Materials (ASTM), Is measure the same as measure?

ASTM D7263-21 Standard Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens
ASTM D3983-98(2019) Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM D7687-23 Red Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration (Standard + Redline PDF Bundle)
ASTM D7687-21 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D7687-17 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D7687-23 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D3983-98(2011) Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen

NL-NEN, Is measure the same as measure?

NEN 6311-1983 Vegetable and animal oils and fats Determination of the conventional mass by volume and of the relative density
NEN 6311-1993 Vegetable and animal oils and fats. Determination of the conventional mass by volume and of the relative density
NVN 2957-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous aromatic hydrocarbons by gas diffusive sampling with a dosemeter, liquid desorption and gas chromatography
NVN 2959-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous aromatic hydrocarbons by gas diffusive sampling with a dosemeter, thermal desorption and gas chromatography
NVN 2963-1992 Air quality. Workplace atmosphere. Determination of the concentration of aliphatich hydrocarbons by gas diffusive sampling with a dosemeter, thermal desorption and gas chromatography

IT-UNI, Is measure the same as measure?

UNI ISO 11665-4:2021 Measurement of radioactivity in the environment -- Air: radon-222 - Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis

KR-KS, Is measure the same as measure?

KS D ISO 11438-1-2012 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 1：General requirement and sample dissolution
KS I ISO 8760-2019 Work-place air ― Determination of mass concentration of carbon monoxide ― Method using detector tubes for short-term sampling with direct indication

Professional Standard - Medicine, Is measure the same as measure?

YY/T 0638-2008 In vitro diagnostic medical devices.Measurement of quantities in biological samples.Metrological traceability of assigned values for catalytic concentration of enzymes in calibrators and control materials

NZ-SNZ, Is measure the same as measure?

AS/NZS 1605.1:2006 Methods for sampling and analysing timber preservatives and preservativetreated timber Part 1: General requirements, sampling, and determination of sapwood and heartwood presence

Association of German Mechanical Engineers, Is measure the same as measure?

VDI 4320 Blatt 1-2010 Measurement of atmospheric depositions - Sampling with bulk- and wet only collectors - General principles
VDI 2267 Blatt 9-2002 Determination of suspended particulates matter in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic fluorescense spectrometry (AFS) with cold vapour technique
VDI 2119-2013 Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration
VDI 2267 Blatt 8-2000 Determination of suspended particles in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic absorption spectrometry (AAS) with cold vapour technique
VDI 2453 Blatt 2-2002 Gaseous air pollution measurement - Measurement of concentration of nitrogen monoxide and nitrogen dioxide - Calibration of NO/NOx chemiluminescence analysers using gas phase titration
VDI 2453 Blatt 3-1995 Gaseous air pollution measurement - Determination of the nitrogen monoxide and nitrogen dioxide concentration - Preparation of the calibration gas mixtures and determination of their concentration

Illuminating Engineering Society of North America, Is measure the same as measure?

IESNA LM-45-2000 Approved Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps

International Electrotechnical Commission (IEC), Is measure the same as measure?

IEC 62132-1:2015 Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions
IEC 62132-1:2006 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 1: General conditions and definitions

YU-JUS, Is measure the same as measure?

JUS C.A6.005-1987 Metallic and other non-organic coatings. Definitior.s and conventions conceming the measurement of thickness

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Is measure the same as measure?

JEDEC JESD33B-2004 Standard Method for Measuring and Using the Temperature Coefficient of Resistance to Determine the Temperature of a Metallization Line

Professional Standard - Chemical Industry, Is measure the same as measure?

HG/T 3050.1-2001 Rubber-or plastics-coated fabrics - Determination of roll characteristics - Part 1:Method for determination of length,width and net mass

IN-BIS, Is measure the same as measure?

European Committee for Electrotechnical Standardization（CENELEC）, Is measure the same as measure?

EN 62132-1:2016 Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions

AGMA - American Gear Manufacturers Association, Is measure the same as measure?

98FTM7-1998 Checker of 3D Form Accuracy of Hypoid & Bevel Gear Teeth for the new Generation and Quality Control

National Metrological Technical Specifications of the People's Republic of China, Is measure the same as measure?

JJF(烟草) 1-2007 Evaluation of Uncertainty in Measurement of Nicotine, NFDPM and Carbon Monoxide of Cigarette Mainstream Smoke
JJF 1-2007 Guidelines for the evaluation of uncertainty in the measurement of nicotine, tar and carbon monoxide in mainstream cigarette smoke

Professional Standard - Nuclear Industry, Is measure the same as measure?

EJ/T 1204.4-2006 Determination of the detection limit and decision threshold for ionizing radiation measurements Part 4: Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment

International Telecommunication Union (ITU), Is measure the same as measure?

ITU-T G.727 APPENDIX I, TEST VECTORS-1991 Description of the digital test sequences for the verification of the G.727 5-, 4-, 3- and 2-bit/sample embedded ADPCM algorithm; Appendix I: Test vectors

American National Standards Institute （ANSI), Is measure the same as measure?

ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending

CEN - European Committee for Standardization, Is measure the same as measure?

EN 14211:2005 Ambient air quality - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence