ZH

RU

ES

plastic cuvette

plastic cuvette, Total:303 items.

In the international standard classification, plastic cuvette involves: Analytical chemistry, Plastics, Products of the textile industry, Measurement of volume, mass, density, viscosity, Rubber and plastics products, Hospital equipment, Kitchen equipment, Laboratory medicine, Paint ingredients, Microbiology, Optics and optical measurements, Pipeline components and pipelines, Paints and varnishes, Road vehicle systems, Gears, Office machines, Materials for the reinforcement of composites, Graphical symbols, Wastes, Raw materials for rubber and plastics, Aerospace electric equipment and systems, Textile auxiliary materials, Leather technology, Surface treatment and coating, Iron and steel products, Reinforced plastics, Ceramics, Refractories, Animal feeding stuffs, Aircraft and space vehicles in general, Installations in buildings, Testing of metals, Environmental protection.


Professional Standard - Machinery, plastic cuvette

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, plastic cuvette

  • GB/T 26791-2011 Glass cells
  • GB/T 5474-2016 Plastics.Phenol formaldehyde mouldings.Determination of free ammonia and ammonium compounds.Colorimetric comparison method
  • GB/T 5211.16-1988 Comparison of lightening power of white pigments
  • GB/T 5211.16-2007 Comparison of lightening power of white pigments
  • GB/T 1864-1989 Comparison of colour of pigments
  • GB/T 2414.8-2014 Unsaturated polyester resins (UP-R) for plastics - Part 8: Determination of color by platinum-cobalt colorimetry
  • GB/T 24148.8-2014 Plastics.Unsaturated polyester resin.Part 8:Determination of color using platinum-cobalt colormetric method
  • GB 5211.17-1988 Comparison of Contrast Ratio (Hiding Power) of White Pigments
  • GB/T 5211.17-1988 Comparison of contrast ratio (hiding power) of white pigments
  • GB/T 11187-1989 Comparison of resistance to bleeding of pigments
  • GB/T 5211.20-1999 Comparison of the colour,in full-shade systems,of white,black and coloured pigments--Colorimetric method
  • GB/T 1710-2008 Comparision of resistance to light of coloured pigments of similar types
  • GB/T 18042-2000 Thermoplastics pipes-Determination of creep ratio
  • GB/T 1033.3-2010 Plastics.Methods for determining the density of non-cellular plastics.Part 3:Gas pyknometer method
  • GB/T 19467.1-2004 Plastics-Acquisition and presentation of comparable single-point data-Part 1:Moulding materials
  • GB/T 5211.19-1988 Determination of relative tinting strength and colour on reduction of coloured pigments--Visual comparison method
  • GB/T 13085-2005 Determination of nitrite in feeds-Method using colorimetric analysis
  • GB 5211.19-1988 Determination of relative tinting strength and wash-down color of coloring pigments Visual comparison method
  • GB/T 2409-1980 Plastics--Yellow index test method
  • GB/T 1864-2012 General methods of test for pigments and extenders.Comparison of colour of pigments

ES-AENOR, plastic cuvette

Korean Agency for Technology and Standards (KATS), plastic cuvette

  • KS M 3841-1993 Sterilized plastic petri dishes
  • KS M 3841-2019 Sterilized plastic petri dishes
  • KS M 3841-2009 Sterilized plastic petri dishes
  • KS L ISO 1769-2006(2016) Laboratory glassware-Pippetes-Color coding
  • KS M ISO 1183:2006 Plastics-Methods for determining the density and relative density of non-cellular plastics
  • KS B ISO 12771:2006 Plastics laboratory ware-Disposable serological pipettes
  • KS M ISO 787-25:2007 General methods of test for pigments and extenders-Part 25:Comparison of the colour, in full-shade systems,of white, black and coloured pigments-Colorimetric method
  • KS M ISO 9967-2016(2021) Thermoplastics pipes-Determination of creep ratio
  • KS M ISO 1675:2007 Plastics-Liquid resins-Determination of density by the pyknometer method
  • KS M ISO 2814:2002 Paints and varnishes-Comparison of contrast ratio(hiding power) of paints of the same type and colour
  • KS M 3049-2011 Testing methods for specific heat capacity of plastics
  • KS M ISO 787-25:2022 General methods of test for pigments and extenders — Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments — Colorimetric method
  • KS M 3049-2011(2013) Testing methods for specific heat capacity of plastics
  • KS M ISO 787-25-2007(2017) General methods of test for pigments and extenders-Part 25:Comparison of the colour, in full-shade systems,of white, black and coloured pigments-Colorimetric method
  • KS M ISO 3668:2007 Paints and varnishes-Visual comparison of the colour of paints
  • KS M ISO 7724-2:2007 Paints and varnishes-Colorimetry-Part 2:Colour measurement
  • KS M ISO 7724-3:2007 Paints and varnishes-Colorimetry-Part 3:Calculation of color differences
  • KS M 3016-2011 Testing method of the density and specific gravity for plastics
  • KS M 3817-2002 Methods for comparison of surface roughness of plastics
  • KS M 3817-1982 Methods for comparison of surface roughness of plastics
  • KS M ISO 10350-1-2012(2022) Plastics-Acquisition and presentation of comparable single-point data-Part 1:Moulding materials
  • KS M ISO 10350-1-2012(2017) Plastics-Acquisition and presentation of comparable single-point data-Part 1:Moulding materials
  • KS L 1201-2009 Testing method for specific gravity of fired whiteware materials
  • KS L 1201-1999 Testing method for specific gravity of fired whiteware materials
  • KS M ISO 10350-1:2012 Plastics-Acquisition and presentation of comparable single-point data-Part 1:Moulding materials
  • KS M ISO 1675:2022 Plastics — Liquid resins — Determination of density by the pyknometer method
  • KS M 3072-2008 Testing method for colour fastness of plastics upon exposure to light of the carbon arc
  • KS M ISO 7724-1:2007 Paints and varnishes-Colorimetry-Part 1:Principles

International Organization for Standardization (ISO), plastic cuvette

  • ISO 7056:1981 Plastics laboratory ware; Beakers
  • ISO 5215:2022 Laboratory plastic ware — Volumetric flasks
  • ISO 7057:1981 Plastics laboratory ware; Filter funnels
  • ISO 6706:1981 Plastics laboratory ware; Graduated measuring cylinders
  • ISO 120:1977 Plastics; Phenol-formaldehyde mouldings; Determination of free ammonia and ammonium compounds; Colorimetric comparison method
  • ISO 24998:2008 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
  • ISO 1183:1987 Plastics; Methods for determining the density and relative density of non-cellular plastics
  • ISO 12771:1997 Plastics laboratory ware - Disposable serological pipettes
  • ISO 787-25:2019 General methods of test for pigments and extenders — Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments — Colorimetric method
  • ISO/R 1183:1970 Plastics — Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics
  • ISO 384:2015 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
  • ISO 384:1979 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
  • ISO 10350-1:1998 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials
  • ISO 8962:1987 Plastics - Polymer dispersions - Determination of density
  • ISO 787-25:1993 General methods of test for pigments and extenders; part 25: comparison of the colour, in full-shade systems, of white, black and coloured pigments; colorimetric method
  • ISO 10350-1:2007 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials
  • ISO 10350-1:2017 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials
  • ISO 10113:2020 Metallic materials — Sheet and strip — Determination of plastic strain ratio
  • ISO 1675:1975 Plastics — Liquid resins — Determination of density by the pyknometer method
  • ISO 1675:1985 Plastics; Liquid resins; Determination of density by the pyknometer method
  • ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method

Japanese Industrial Standards Committee (JISC), plastic cuvette

  • JIS K 0950:1988 Sterilized plastic petri dishes
  • JIS S 2040:1994 Large plastics lockable containers for household wares
  • JIS K 7375:2008 Plastics -- Determination of total luminous transmittance and reflectance
  • JIS K 7112:1980 Methods for determining the density and specific gravity of plastics
  • JIS K 7123:1987 Testing methods for specific heat capacity of plastics
  • JIS Z 7120:2003 Plastics -- Guideline for the application of Mobius loop to plastic products
  • JIS K 5101-2-2:2004 Test methods for pigments -- Part 2: Comparison of colour -- Section 2: Colorimetric method
  • JIS K 7104:1976 Methods for comparison of surface roughness of plastics
  • JIS G 3543:2005 Steel wire coated with colored plastics
  • JIS K 7140-1:2000 Plastics -- Acquisition and presentation of comparable single-point data -- Part 1: Moulding materials
  • JIS K 7123 AMD 1:2012 Testing methods for specific heat capacity of plastics (Amendment 1)
  • JIS K 7140-1:2008 Plastics -- Acquisition and presentation of comparable single-point data -- Part 1: Moulding materials
  • JIS K 7140:1995 Plastics -- Acquisition and presentation of comparable single point data

Association Francaise de Normalisation, plastic cuvette

  • NF G37-134:2011 Rubber and plastics coated fabrics - Coloured materials - Visual comparison of the colours.
  • NF B35-902:1983 Plastics laboratory ware. Beakers.
  • NF EN ISO 120:1998 Plastiques - Pièces moulées à base de phénoplastes - Dosage de l'ammoniac libre et des composes ammoniacaux. Méthode par comparaison colorimétrique.
  • NF B35-903:1983 Plastics laboratory ware. Filter funnels.
  • NF B35-904*NF EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures.
  • NF T54-911:2008 Thermoplastics pipes - Determination of creep ratio.
  • NF T54-911*NF EN ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio
  • NF EN ISO 787-25:2019 Méthodes générales d'essai des pigments et matières de charge - Partie 25 : comparaison, dans les systèmes monopigmentaires, de la couleur des pigments blancs, noirs et colorés - Méthode colorimétrique
  • NF T30-061:1981 Paints. Visual comparison of the colour of paints.
  • NF B35-901:1983 Plastics laboratory ware. Graduated measuring cylinders.
  • NF T30-025:1978 Paints. Comparison of pigment colours (mass tone of crushed pastes).
  • NF T31-244:2007 General methods of test for pigments and extenders - Part 25 : comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method.
  • NF EN ISO 23900-3:2018 Pigments et matières de charge - Méthodes de dispersion et évaluation de l'aptitude à la dispersion dans les plastiques - Partie 3 : détermination des propriétés colorimétriques et de la facilité de dispersion des pigments noirs et colorés d...
  • NF T51-201*NF EN ISO 1675:1998 Plastics. Liquid resins. Determination of density by the pyknometer method.
  • NF T51-012:1957 Plastics. Determination of bulk factor of moulding materials.
  • NF T30-095:2003 Paints and varnishes - Visual comparaison of the colour of paints.
  • NF T51-009*NF EN ISO 120:1998 Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Colorimetric comparison method.
  • NF EN ISO 23900-2:2018 Pigments et matières de charge - Méthodes de dispersion et évaluation de l'aptitude à la dispersion dans les plastiques - Partie 2 : détermination des propriétés colorimétriques et de la facilité de dispersion dans le polychlorure de vinyle p...
  • NF T36-004-2:1988 Paints and varnishes. Colorimetry. Part 2 : colour measurement.
  • NF EN ISO 24998:2009 Matériel de laboratoire en matière plastique - Boîtes de Petri à usage unique pour méthodes microbiologiques
  • NF T50-062-1:2008 Plastics - Acquisition and presentation of comparable single-point data - Part 1 : moulding materials.
  • NF EN 12877-2:1999 Matières colorantes dans les plastiques - Détermination de la stabilité de la couleur à la chaleur au cours de la mi se en oeuvre des matières colorantes dans les plastiques - Partie 2 : détermination par moulage-injection
  • NF B35-300*NF EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
  • NF EN ISO 384:2016 Matériels de laboratoire en verre ou en plastique - Principes de conception et de construction d'instruments volumétriques
  • NF T50-062:1995 PLASTICS. ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA. (EUROPEAN STANDARD EN ISO 10350).
  • NF T36-004-1:1988 Paints and varnishes. Colorimetry. Part 1 : principles.
  • NF T51-037-3*NF EN ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Part 3 : gas pyknometer method

Malaysia Standards, plastic cuvette

British Standards Institution (BSI), plastic cuvette

  • BS ISO 5215:2022 Laboratory plastic ware. Volumetric flasks
  • BS EN ISO 120:1978 Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Colorimetric comparison method
  • BS EN ISO 120:1998 Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method
  • BS 5452:1977 Specification for hospital hollow-ware made of plastics material
  • BS EN ISO 24998:2010 Plastics laboratory ware. Single-use Petri dishes for microbiological procedures
  • BS EN ISO 24998:2008 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
  • BS 611-2:1990 Petri dishes - Specification for plastics Petri dishes for single use
  • BS EN ISO 787-25:2019 Tracked Changes. General methods of test for pigments and extenders. Comparison of the colour, in full-shade systems, of white, black and coloured pigments. Colorimetric method
  • BS ISO 12771:1997 Plastics laboratory ware - Disposable serological pipettes
  • BS EN ISO 179:1997 Plastics. Determination of Charpy impact strength
  • BS EN 12877-2:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Determination by injection moulding
  • BS EN ISO 3668:2001 Paints and varnishes - Visual comparison of the colour of paints
  • BS EN ISO 3668:1998 Paints and varnishes. Visual comparison of the colour of paints
  • BS EN ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Gas pyknometer method
  • BS EN ISO 9967:2016 Tracked Changes. Thermoplastics pipes. Determination of creep ratio
  • BS EN ISO 384:2015 Laboratory glass and plastics ware. Principles of design and construction of volumetric instruments
  • BS EN 12877-1:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - General introduction
  • BS EN ISO 10350-2:2011 Plastics. Acquisition and presentation of comparable single-point data. Long-fibre-reinforced plastics
  • BS EN ISO 10350-2:2020 Plastics. Acquisition and presentation of comparable single-point data - Long-fibre-reinforced plastics
  • BS EN 12877-4:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Determination by two-roll milling
  • BS 4901:1976 Specification for plastics colours for building purposes
  • BS EN ISO 10350-1:2008 Plastics - Acquisition and presentation of comparable singlepoint data - Part 1: Moulding materials
  • BS 3483-A1:1983 Methods for testing pigments for paints - Comparison of colour
  • BS EN 12877-3:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Determination by oven test
  • BS EN ISO 1675:1998 Plastics - Liquid resins - Determination of density by the pyknometer method
  • BS EN ISO 2814:2006 Paints and varnishes. Comparison of contrast ratio (hiding power) of paints of the same type and colour

GM Europe, plastic cuvette

  • GME 60414-2009 Colour Measurement and Visual Comparisons on Interior Plastic Parts

Standard Association of Australia (SAA), plastic cuvette

German Institute for Standardization, plastic cuvette

  • DIN EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008); English version of DIN EN ISO 24998:2009-03
  • DIN EN ISO 120:1998 Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds; Colorimetric comparison method (ISO 120:1977); German version EN ISO 120:1998
  • DIN 12672:2001-10 Laboratory glass or plastics ware - Imhoff sedimentation cones
  • DIN EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2007); English version of DIN EN ISO 9967:2008-02
  • DIN 55983:1983 Testing of pigments; comparison of colour of white pigments in full shade systems
  • DIN EN ISO 9967:2016-07 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016); German version EN ISO 9967:2016
  • DIN 55985-1:2020 Pigments - Comparison of the colour of pigments in mass-tone systems - Part 1: Coloured pigments
  • DIN 55985-2:2020 Pigments - Comparison of the colour of pigments in mass-tone systems - Part 2: Black pigments
  • DIN 55985-2:2020-11 Pigments - Comparison of the colour of pigments in mass-tone systems - Part 2: Black pigments
  • DIN 55985-1:2020-11 Pigments - Comparison of the colour of pigments in mass-tone systems - Part 1: Coloured pigments
  • DIN EN ISO 787-25:2019-06 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:2019); German version EN ISO 787-25:2019
  • DIN EN 12877-2:2000-01 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding; German version EN 12877-2:1999
  • DIN EN ISO 3668:2001 Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998); German version EN ISO 3668:2001
  • DIN 12672:2001 Laboratory glass or plastics ware - Imhoff sedimentation cones
  • DIN 55985:1981 Testing of pigments; comparison of colour of coloured pigments in full shade system
  • DIN EN ISO 787-25:2019 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:2019)
  • DIN 12693:2002-02 Plastics laboratory ware - Disposable micropipettes adjusted on "In"
  • DIN EN ISO 787-25:2018 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO/DIS 787-25:2018); German and English version prEN ISO 787-25:2018
  • DIN EN 12877-1:2000-01 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 1: General introduction; German version EN 12877-1:1999
  • DIN 55985-2:1989 Testing of pigments; comparison of the colour of pigments in full shade systems; black pigments
  • DIN EN ISO 24998:2009-03 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008); German version EN ISO 24998:2008
  • DIN EN 12877-3:2000-01 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test; German version EN 12877-3:1999
  • DIN EN 12877-4:2000-01 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 4: Determination by two-roll milling; German version EN 12877-4:1999
  • DIN EN 12877-2:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding; German version EN 12877-2:1999
  • DIN EN ISO 2814:2006 Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour (ISO 2814:1973); English version of DIN EN ISO 2814:2006-04
  • DIN 12693:2002 Plastics laboratory ware - Disposable micropipettes adjusted on "In"
  • DIN 55986:1981 Testing of pigments; determination of relative tinting strength and colour difference after colour reduction; colorimetric method
  • DIN 55987:1981 Testing of pigments; determination of hiding power value of pigmented media; colorimetric method
  • DIN EN ISO 787-25:2007 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:1993); English version of DIN EN ISO 787-25:2007-02
  • DIN EN ISO 1183-3:2000 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); German version EN ISO 1183-3:1999
  • DIN EN ISO 1183-3:2000-05 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); German version EN ISO 1183-3:1999

European Committee for Standardization (CEN), plastic cuvette

  • EN ISO 24998:2008 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
  • EN ISO 3668:2020 Paints and varnishes - Visual comparison of colour of paints (ISO 3668:2017)
  • EN ISO 3668:2001 Paints and Varnishes - Visual Comparison of the Colour of Paints
  • EN ISO 787-25:2006 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method
  • EN ISO 2814:2006 Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour
  • EN ISO 10350-1:2000 Plastics - Acquisition and Presentation of Comparable Single-Point Data - Part 1: Moulding Materials ISO 10350-1:1998
  • EN ISO 10350-1:2008 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007)
  • EN ISO 10350-2:2020 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2020)
  • EN ISO 10350-2:2011 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics

SE-SIS, plastic cuvette

CH-SNV, plastic cuvette

Danish Standards Foundation, plastic cuvette

  • DS/ISO/R 1183:1985 Plastics for determining the density and relative density (Specific gravity) of plastics excluding cellular plastics
  • DS/EN ISO 120:1999 Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method
  • DS/EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio
  • DS/EN ISO 787-25:2007 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method
  • DS/EN ISO 2814:2006 Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour
  • DS/EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
  • DS/EN 12877-1:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 1: General introduction
  • DS/EN 12877-2:2000 Colouring materials in plastics - Determination of colour staility to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding
  • DS/EN 12877-3:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test
  • DS/EN ISO 1183-3:2000 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method
  • DS/EN 12877-4:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 4: Determination by two-roll milling

RU-GOST R, plastic cuvette

  • GOST 23630.1-1979 Plastics. Method for the determination of thermal capacity
  • GOST 20903-1975 The rectangular fused silica cells for the spectrophotometers. Basic dimensions. Technical requirements
  • GOST 29319-1992 Paints and varnishes. Visual comparison of the colour of paints
  • GOST R 52490-2005 Paint materials. Colorimetry. Part 3. Calculation of colour differences
  • GOST R 52662-2006 Paint materials. Colorimetry. Part 2. Colour measurement
  • GOST 19266-1979 Paintwork materials. Methods of colour determination
  • GOST 34367.1-2017 Plastics. Acquisition and presentation of comparable single-point data for moulding materials
  • GOST R 52489-2005 Paint materials. Colorimetry. Part 1. Principles
  • GOST 13278-1977 Organic dyestuffs. The methods of comparative dyeing for natural leather

NL-NEN, plastic cuvette

American Society for Testing and Materials (ASTM), plastic cuvette

  • ASTM D5245-92(2005) Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
  • ASTM D5245-19 Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses

Lithuanian Standards Office , plastic cuvette

  • LST EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008)
  • LST EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2007)
  • LST EN ISO 787-25:2007 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:1993)
  • LST EN ISO 120:2000 Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method (ISO 120:1977)
  • LST EN 12877-2-2002 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding
  • LST EN 12877-1-2002 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 1: General introduction
  • LST EN 12877-3-2002 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test
  • LST EN 12877-4-2002 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 4: Determination by two-roll milling

AENOR, plastic cuvette

  • UNE-EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008)
  • UNE-EN ISO 787-25:2007 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:1993)
  • UNE-EN ISO 120:1999 PLASTICS - PHENOL-FORMALDEHYDE MOULDINGS - DETERMINATION OF FREE AMMONIA AND AMMONIUM COMPOUNDS. COLORIMETRIC COMPARISON METHOD (ISO 120:1977).
  • UNE-EN 12877-2:2000 COLOURING MATERIALS IN PLASTICS - DETERMINATION OF COLOUR STABILITY TO HEAT DURING PROCESSING OF COLOURING MATERIALS IN PLASTICS - PART 2: DETERMINATION BY INJECTION MOULDING
  • UNE 64023:1970 MIXED FEEDS AND RAW MATERIALS. DETERMINATION OF IRON COLORIMETRIC METHOD.
  • UNE-EN 12877-1:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 1: General introduction
  • UNE 64026:1970 MIXED FEEDS AND RAW MATERIALS. QUANTITATIVE DETERMINATION OF MANGANSE. COLORIMETRIC METHOD.
  • UNE-EN 12877-3:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test
  • UNE-EN 12877-4:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 4: Determination by two-roll milling

American Gear Manufacturers Association, plastic cuvette

AGMA - American Gear Manufacturers Association, plastic cuvette

KR-KS, plastic cuvette

  • KS M ISO 9967-2016 Thermoplastics pipes-Determination of creep ratio
  • KS M ISO 787-25-2022 General methods of test for pigments and extenders — Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments — Colorimetric method
  • KS M ISO 1675-2022 Plastics — Liquid resins — Determination of density by the pyknometer method

DE-VDA, plastic cuvette

  • VDA 280-1-2001 Colorimetry for motor vehicles - Colour measuring of plastic surfaces of interior materials for motor vehicles
  • VDA 280-3-2001 Colorimetry for motor vehicles - Colour measurement of automotive paint finishes - Solid paints
  • VDA 280-4-2001 Colorimetry for motor vehicles - Colour measurement of automotive paint finishes - Goniochromatic paints

PL-PKN, plastic cuvette

  • PN H77100-1964 Articles de menage Ustensiles en fonte, emailles Specifications techn?ques
  • PN C04404-15-1987 Pigments for paints General testing methods Comparison of relative tinting strength and shade of the chromatic pigments

HU-MSZT, plastic cuvette

Indonesia Standards, plastic cuvette

ES-UNE, plastic cuvette

  • UNE-EN ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
  • UNE-EN ISO 787-25:2020 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:2019)
  • UNE-EN 2960:2020 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:2019)

Professional Standard - Chemical Industry, plastic cuvette

American National Standards Institute (ANSI), plastic cuvette

Taiwan Provincial Standard of the People's Republic of China, plastic cuvette

  • CNS 13333-1994 Method of Test for the Density and Specific Gravity of Plastics
  • CNS 14310-1999 Method of determining the plastic strain ratio for metallic sheet and strip

Group Standards of the People's Republic of China, plastic cuvette

Professional Standard - Ferrous Metallurgy, plastic cuvette

  • YB/T 917-1997 Carbonaceous materials.Determination of vanadium content.Colorimetric method

Society of Automotive Engineers (SAE), plastic cuvette

  • SAE AMS3636F-1984 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
  • SAE AMS3636E-1982 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
  • SAE AMS3636B-1967 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
  • SAE AMS3636D-1973 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
  • SAE AMS3636C-1971 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
  • SAE AMS3636A-1966 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
  • SAE AMS3638D-1981 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
  • SAE AMS3636G-1991 Tubing, Plastic, Electrical Insulation Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
  • SAE AMS3638C-1971 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
  • SAE AMS3638A-1965 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
  • SAE AMS3638B-1967 PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
  • SAE AMS3636G-1995 TUBING, PLASTIC, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
  • SAE AMS3636H-2012 Tubing, Plastic, Electrical Insulation, Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable, 2 to 1 Shrink Ratio
  • SAE AMS3638F-1993 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Pigmented, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio
  • SAE AMS3638G-2012 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Pigmented, Semi-Rigid, Heat-Shrinkable, 2 to 1 Shrink Ratio
  • SAE AMS3582A-2012 Plastic Tubing, Electrical Insulation Crosslinked Polyvinyl Chloride, Flexible Heat Shrinkable 2 to 1 Shrink Ratio

CZ-CSN, plastic cuvette

  • CSN ISO 10113:1994 Metallic materials.Sheet and strips.Determination of plastic strain ratio
  • CSN 64 0246-1981 Testing of plastics. ualitative evaluation of he bleeding of colorants

IT-UNI, plastic cuvette

CEN - European Committee for Standardization, plastic cuvette

  • EN ISO 787-25:2019 General methods of test for pigments and extenders - Part 25: Comparison of the colour@ in full-shade systems@ of white@ black and coloured pigments - Colorimetric method
  • EN ISO 10350-1:2017 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials

SAE - SAE International, plastic cuvette

  • SAE AMS3587C-1989 Plastic Tubing@ Electrical Insulation Irradiated Polyolefin@ Pigmented@ Very Flexible@ Heat-Shrinkable Low Recovery Temperature 2 to 1 Shrink Ratio
  • SAE AMS3638E-1988 PLASTIC TUBING@ ELECTRICAL INSULATION Irradiated Polyolefin@ Pigmented@ Semi-Rigid@ Heat-Shrinkable 2 to 1 Shrink Ratio

RO-ASRO, plastic cuvette

  • STAS 5801-1986 RIGID PLASTICS Charpy shock resistance test
  • STAS 11274-1979 VARNISHES AND PAINTS Determination of films colour by comparing with colour standard

未注明发布机构, plastic cuvette

ZA-SANS, plastic cuvette

  • SANS 3668:1998 Paints and varnishes - Visual comparison of the colour of paints

ECIA - Electronic Components Industry Association, plastic cuvette

  • 230-1959 Color Marking of Thermoplastic Covered Wire

Canadian General Standards Board (CGSB), plastic cuvette

TR-TSE, plastic cuvette

  • TS 2616-1977 General Methods Of Test For Pipents Pa?t-XVn Comparison Of Lightening Power Of White Pipents
  • TS 681-1969 PLASTICS DETERMINATION OF THE PERCENTAGE OF EXTRACTABLE MATERIALS ?N POLYAMIDES
  • TS 987-1978 PLASTiCS - OUALITATIVE EVALUATION OF THE BLEED?NG OF COLORANTS

国家市场监督管理总局、中国国家标准化管理委员会, plastic cuvette

BR-ABNT, plastic cuvette

CU-NC, plastic cuvette

  • NC 32-33-1987 Paints and Varnishes. Determination of Color by Visual Comparison

YU-JUS, plastic cuvette

  • JUS Z.S0.010-1982 Safety colours and signs. Colorimetric andphotametric properties of materials

United States Navy, plastic cuvette

PH-BPS, plastic cuvette

  • PNS ISO 384:2021 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved