ZH
RU
ES

Domestic flow instrument

Domestic flow instrument, Total:173 items.

In the international standard classification, Domestic flow instrument involves: Hydraulic energy engineering, Non-destructive testing, Radiation measurements, Aircraft and space vehicles in general, Radiation protection, Electricity. Magnetism. Electrical and magnetic measurements, Metrology and measurement in general, Power stations in general, Protection of and in buildings, Bearings, Mining equipment, Measurement of volume, mass, density, viscosity, Environmental protection, Wastes, Nuclear energy engineering, General methods of tests and analysis for food products, Measurement of fluid flow, Linear and angular measurements, Domestic, commercial and industrial heating appliances, Switchgear and controlgear, Wind turbine systems and other alternative sources of energy, Vibrations, shock and vibration measurements, Plastics, Milk and milk products, Capacitors, Aerospace electric equipment and systems.

Professional Standard - Aerospace, Domestic flow instrument

QJ 1570.1-1988 Super long abbreviation of domestic instrument name

Institute of Electrical and Electronics Engineers (IEEE), Domestic flow instrument

IEEE/ANSI N323AB-2013 American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
IEEE/ANSI N323A-1997 American National Standard Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
ANSI N323AB-2013 (Revision and Redesignation of ANSI N323A-1997 and ANSI N323B-2002) American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
IEEE N42.33-2006 Portable Radiation Detection Instrumentation for Homeland Security
IEEE/ANSI N42.33-2006 American National Standard for Portable Radiation Detection Instrumentation for Homeland Security
IEEE/ANSI N42.33-2003 American National Standard for Portable Radiation Detection Instrumentation for Homeland Security
IEEE/ANSI N323B-2003 American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instrumentation for Near Background Operation
ANSI Std N42.17C-1989 American National Standard Performance Specifications for Health Physics Instrumentation. Portable Instrumentation for Use in Extreme Environmental Conditions
IEEE/ANSI N42.17A-1989 American National Standard Performance Specifications for Health Physics Instrumentation - Portable Instrumentation for Use in Normal Environmental Conditions
ANSI Std N42.18-1980 American National Standard Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents, American National Standard
IEEE/ANSI N42.18-1980 American National Standard Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents, American National Standard
ANSI N42.17AC-2022 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Survey Instrumentation for Use in Normal and Extreme Environmental Conditions
IEEE/ANSI N42.17AC-2022 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Survey Instrumentation for Use in Normal and Extreme Environmental Conditions
IEEE/ANSI N42.34-2006 American National Standard Performance Criteria for Hand-held Instruments for the Detection and Indentification of Radionuclides
IEEE/ANSI N42.34-2015 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
IEEE N42.34-2021 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
IEEE/ANSI N42.34-2021 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
ANSI N42.34-2015 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
IEEE/ANSI N42.34-2003 American National Standard Performance Criteria for Hand-held Instruments for the Detection and Identification of Radionuclides
ANSI N42.34-2021 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
ANSI N42.34a-2020 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides - Amendment 1
IEEE/ANSI N42.17A-2003 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Instrumentation for Use in Normal Environmental Conditions
ANSI PN42.34-D9a, 2015 ANSI/IEEE Draft American National Standard Performance Criteria for Hand-Held Instruments for the Detection and Identification of Radionuclides
ANSI PN42.33/D3.4, May 2018 IEEE/ANSI Draft Standard for Portable Gamma and Radiation Detection Instrumentation for Homeland Security
IEEE/IEC 60488-2-2004 IEC/IEEE International - Standard Digital Interface for Programmable Instrumentation - Part 2: Codes, formats, protocols and common commands
IEEE 488.2*IEC 60488-2-2004 IEC/IEEE International - Standard Digital Interface for Programmable Instrumentation - Part 2: Codes, formats, protocols and common commands
IEEE 488.2 IEC 60488-2 First edition 2004-05 IEC/IEEE International - Standard Digital Interface for Programmable Instrumentation - Part 2: Codes, formats, protocols and common commands
IEEE/IEC 62209-1528-2020 IEC/IEEE International Standard - Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Part 1528: Human models, instrumentation, and

Professional Standard - Water Conservancy, Domestic flow instrument

SL/T 148.4-1995 Grading of products quality for propeller-type current meter
SL/T 148.5-1995 Grading of products quality for cop-type current meter

GB-REG, Domestic flow instrument

REG AC 120-105-2010 Foreign Terminal Instrument Procedures (FTIP) Acceptance/Review Process

工业和信息化部, Domestic flow instrument

JB/T 14223-2021 Non-destructive testing instrument Rechargeable AC yoke flaw detector

Military Standards (MIL-STD), Domestic flow instrument

DOD A-A-53577-1988 ELECTROSURGICAL APPARATUS (PORTABLE, UNBLENDED CURRENT)

American National Standards Institute （ANSI), Domestic flow instrument

ANSI N42.33-2006 Portable Radiation Detection Instrumentation for Homeland Security
ANSI/IEEE N42.34:2015 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
ANSI/IEEE N42.34:2021 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Domestic flow instrument

IEEE N42.33-2003 Portable Radiation Detection Instrumentation for Homeland Security
IEEE N42.34-2015 American National Standard Performance Criteria for Handheld Instruments for the Detection and Identification of Radionuclides
IEEE C57.99-1965 Guide for Loading Dry-Type and Oil-Immersed Current-Limiting Reactors Appendix to American Standard Requirements@ Terminology@ and Test Code for Current-Limiting Reactors@ C57.16-1958
IEEE PN42.33D3-2018 DRAFT Standard for Portable Gamma and X Radiation Detection Instrumentation for Homeland Security

RU-GOST R, Domestic flow instrument

GOST R IEC 60044-8-2010 Instrument transformers. Part 8. Electronic current transformers
GOST R 8.908-2015 State system for ensuring the uniformity of measurements. Measuring instruments of volume flow of oil and oil products. Tests, verification and calibration with provers
GOST R 8.866-2014 The state system of measurement assurance. Standard a.c. voltage and current thermal converters. Verification procedure
GOST 14014-1991 Digital instruments and measuring transducers of voltage, current and resistance. General technical requirements and methods of tests
GOST 14014-1982 Digital instruments and measuring transducers of voltage, current and resistance. General specifications
GOST 8.523-2014 State system for ensuring the uniformity of measurements. Gravimetric filling instruments. Verification procedure
GOST R 8.797-2012 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring the heat flux surface density in the range from 1 to 10000 W/m2
GOST 8.373-2012 State system for insuring the uniformity of measurements. State primary special standard and national chain of traceability for volumetric and mass oil flow metering instruments
GOST R 8.867-2014 State system for ensuring the uniformity of measurement. Measuring instruments of direct current in range from 1·10 v stepeni -15 to 1·10 v stepeni -9 A. Verification procedure
GOST R 56750-2015 Electricity metering equipment (a.c.). Particular requirements. Meters with analog inputs connected to the low-power sensor (electronic transformers) of voltage and current
GOST 8.142-2013 State system for insuring the uniformity of measurements. The national traceability chain for instruments measuring the mass and volumetric (the mass and the volume) flow of liquid
GOST R 8.859-2013 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of current ratio and phase displacement for sinusoidal current
GOST R 8.669-2009 State system for ensuring the uniformity of measurements. Vibrometers with piezoelectric, induction and eddy current vibrations transducers. Methods of verification
GOST R 8.740-2011 State system for ensuring the uniformity of measurements. Flow rate and quantity of gas. Measurements procedure by turbine, rotary and vortex flowmeters and gas meters
GOST R 8.746-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the ratio error and phase displacement of a.c. power frequency voltage in the range from 0,1/V3 do 750/V3 kB
GOST 8.374-2013 State system for insuring the uniformity of measurements. State verification schedule for instruments measuring the volumetric and mass flow (volume and mass) of water
GOST 8.373-1980 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring volumetric flow of petroleum products within the range of 2,8·10 in minus 6 degree up to 2,8·10 in minus 2 degree m3/s
GOST R 8.899-2015 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Verification of measurement procedure
GOST R 8.648-2008 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring of alternate electrical voltage to 1000 V in the frequency range from 1·10 in minus 2 degree up to 2·10 in 9 degree Hz
GOST R 8.849-2013 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of electric capacitance and dielectric dissipation for AC high voltage of power frequency
GOST R 8.767-2011 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of alternating current from 1·10 -8 to 100 A in the frequency range from 1·10 -1 to 1·10 6 Hz
GOST R 8.648-2015 State system for ensuring the Uniformity of measurements. State verification schedule for measuring instruments of alternate electrical voltage to 1000 V in the frequency range from 1·10-2 to 2·10-9 Hz

Professional Standard - Electricity, Domestic flow instrument

DL/T 1394-2014 Technical requirement of electronic current and voltage transformer error test sets

International Telecommunication Union (ITU), Domestic flow instrument

ITU-R BT.1847-1-2015 1 280 × 720, 16:9 progressively-captured image format for production and international programme exchange in the 50 Hz environment
ITU-R BT.1847-2008 1 280 × 720 16:9 progressively-captured image format for production and international programme exchange in the 50 Hz environment
ITU-R BT.1847 SPANISH-2008 1 280 × 720 16:9 progressively-captured image format for production and international programme exchange in the 50 Hz environment
ITU-R BT.1847 FRENCH-2008 1 280 × 720 16:9 progressively-captured image format for production and international programme exchange in the 50 Hz environment

Professional Standard - Commodity Inspection, Domestic flow instrument

SN/T 1843.2-2006 Rules for the inspection of instruments for import and export. Part 2: Alternating current static watt-hour meters

PL-PKN, Domestic flow instrument

PN M42302-1974 National Automa?ion and Measurement ys?em ressure gauges fixture eales

Professional Standard - Earthquake, Domestic flow instrument

DB/T 32.1-2008 Technical requirements of instruments in network for earthquake monitoring.Underground fluid observation instruments.Part 1: Pressure instrument for water level
DB/T 32.1-2020 Seismic Observation Instrument Network Technical Requirements for Underground Fluid Observation Instrument Part 1: Pressure Type Water Level Instrument

British Standards Institution (BSI), Domestic flow instrument

BS 3680-8A:1989 Measurement of liquid flow in open channels - Measuring instruments and equipment - Current meters incorporating a rotating element
BS 3680-8C:1980 Measurement of liquid flow in open channels - Measuring instruments and equipment - Calibration of rotating-element current-meters in straight open tanks
BS EN ISO 12179:2022 Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
BS EN ISO 25178-606:2015 Geometrical product specification (GPS). Surface texture: Areal. Nominal characteristics of non-contact (focus variation) instruments
BS EN ISO 12179:2001 Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments
BS EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture - Areal - Nominal characteristics of contact (stylus) instruments
20/30397768 DC BS EN ISO 12179. Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
BS EN ISO 25178-607:2019 Geometrical product specifications (GPS). Surface texture: Areal - Nominal characteristics of non-contact (confocal microscopy) instruments
BS EN ISO 25178-604:2013 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (coherence scanning interferometry) instruments
BS EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture - Areal - Nominal characteristics of non-contact (confocal chromatic probe) instruments
BS EN ISO 25178-603:2013 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
BS EN ISO 25178-605:2014 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (point autofocus probe) instruments

United States Navy, Domestic flow instrument

NAVY MIL-STD-1647 E-2003 IDENTIFICATION MARKINGS FOR DOMESTICALLY MANUFACTURED BEARINGS, BALL, ANNULAR FOR INSTRUMENTS AND PRECISION COMPONENTS

Professional Standard - Geology, Domestic flow instrument

DZ/T 0042.2-1992 Requirements and formats for drawings and technical documents of geological instruments
DZ/Z 6-1981 Requirements and formats for drawings and technical documents of geological instruments

Professional Standard - Environmental Protection, Domestic flow instrument

HJ/T 281-2006 Specifications of environmental protection product Dispersed aerator

International Electrotechnical Commission (IEC), Domestic flow instrument

IEC 62089:2001 Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters

海关总署, Domestic flow instrument

SN/T 5436-2022 Flow cytometric method for enumeration of lactic acid bacteria in milk and dairy starter cultures and fermented products

IT-UNI, Domestic flow instrument

UNI 2325-1943

German Institute for Standardization, Domestic flow instrument

DIN 46284:1972 Two- and three-pole socket terminal strips (appliance terminals) 380 V a.c. and 440 V d.c. for conductors up to 2,5 mm<(hoch)2>
DIN EN 1266/A1:2005 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases; English version of DIN EN 1266:2002/A1:2005
DIN 42600-5:1977 Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; current transformers (support-type-insulator) HSV 12 to 36 kV, large design, main dimensions, indoor type
DIN EN ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000); German version EN ISO 12179:2000
DIN 42600-4:1977 Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; currenttransformers (support-typ-insulator), HSV 12 kV, small design, main dimensions, indoor type
DIN 42600-8:1983 Instrument transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; current transformers (support-type-insulators) U<(Index)m> 12 and 24 kV; narrow design, main dimensions, indoor type
DIN EN ISO 12179:2023 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
DIN EN ISO 3274:1998-04 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996); German version EN ISO 3274:1997
DIN EN ISO 25178-606:2016-12 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015); German version EN ISO 25178-606:2015
DIN EN 3662-006:2008 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus-bar version - Product standard; German and English version EN 3662-006:2006
DIN EN ISO 25178-607:2019-12 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments (ISO 25178-607:2019); German version EN ISO 25178-607:2019
DIN EN ISO 25178-605:2014-06 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014); German version EN ISO 25178-605:2014
DIN EN ISO 25178-601:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010); German version EN ISO 25178-601:2010

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Domestic flow instrument

GB/T 22264.2-2008(英文版) Fixed digital electric measuring instruments—Part 2: Special requirements for ammeters and voltmeters
GB/T 19600-2004 Geometrical Product Specifications(GPS)Surface texture:Profile method-Calibration of contact(stylus)instruments
GB/T 6062-2009 Geometrical Product Specifications(GPS).Surface texture:Profile method.Nominal characteristic of contact(stylus) instruments
GB/T 6062-2002 Geometrical product specifications (GPS)--Surface texture:Profile method--Nominal characteristics of contact(stylus)instruments
GB/T 33523.606-2022 Geometrical product specifications (GPS)—Surface texture: Areal—Part 606: Nominal characteristics of non-contact (focus variation) instruments

Japanese Industrial Standards Committee (JISC), Domestic flow instrument

JIS C 1273-2:2017 Alternating-current static meters for reactive energy -- Part 2: Measuring instruments used in transaction or certification
JIS C 1271-2:2017 Alternating-current static meters for active energy -- Classes 1 and 2 -- Part 2: Measuring instruments used in transaction or certification
JIS B 0670:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Calibration of contact (stylus) instruments
JIS B 0651 AMD 1:2022 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments (Amendment 1)
JIS C 1272-2:2017 Alternating-current static meters for active energy -- Classes 0.2 S and 0.5 S -- Part 2: Measuring instruments used in transaction or certification
JIS B 0651:2001 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments
JIS B 0651 ERRATUM 1:2001 Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments (Erratum 1)

Danish Standards Foundation, Domestic flow instrument

DS/EN ISO 3274/Corr. 1:2007 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
DS/EN ISO 3274:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
DS/EN ISO 12179/Corr. 1:2007 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
DS/EN ISO 12179:2000 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
DS/EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments
DS/EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments
DS/EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments

Group Standards of the People's Republic of China, Domestic flow instrument

T/CEEIA 554-2021 Technical specification for green-design product assessment AC electromagnetic contactor
T/HGMIF 011-2022 Technical specification for green-design product assessment Double-Fed Wind Power Converter

Association Francaise de Normalisation, Domestic flow instrument

NF E05-056*NF EN ISO 12179:2022 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
NF EN ISO 12179:2022 Spécification géométrique des produits (GPS) - États de surface : méthode du profil - Étalonnage des instruments à contact (palpeur)
NF V04-397*NF ISO 19344:2016 Milk and milk products - Starter cultures, probiotics and fermented products - Quantification of lactic acid bacteria by flow cytometry
NF EN 17694-2:2023 Hydrométrie - Exigences minimales de performance et modes opératoires d'essai pour les équipements de surveillance de l'eau - Dispositifs de mesure de l'écoulement - Partie 2 : instruments de mesure pour écoulements en conduite fermée
NF EN ISO 25178-605:2014 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 605 : caractéristiques nominales des instruments sans contact (capteur autofocus à point)
NF EN ISO 25178-602:2010 Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 602 : caractéristiques nominales des instruments sans contact (à capteur confocal chromatique)
NF ISO 22514-8:2014 Méthodes statistiques dans la gestion de processus - Aptitude et performance - Partie 8 : aptitude machine d'un procédé de production multimodal
NF EN ISO 25178-606:2015 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 606 : caractéristiques nominales des instruments sans contact (à variation focale)
NF E05-031-605*NF EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture : areal - Part 605 : nominal characteristics of non-contact (point autofocus probe) instruments
NF EN ISO 25178-607:2019 Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 607 : caractéristiques nominales des instruments sans contact (microscopie confocale)

ES-UNE, Domestic flow instrument

UNE-EN ISO 12179:2023 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
UNE-EN ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) (Endorsed by AENOR in September of 2015.)
UNE-EN ISO 25178-607:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)

Korean Agency for Technology and Standards (KATS), Domestic flow instrument

KS B ISO 12179:2004 Geometrical Product Specifications(GPS)-Surface texture:Profile method-Calibration of contact(stylus) instruments
KS B ISO 12179:2014 Geometrical Product Specifications(GPS) — Surface texture: Profile method — Calibration of contact(stylus) instruments
KS B ISO 10360-4:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 4:CMMs used in scanning measuring mode
KS B ISO 10360-4:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 4: CMMs used in scanning measuring mode

未注明发布机构, Domestic flow instrument

BS EN ISO 3274:1998(1999) Geometric Product Specifications (GPS) — Surface texture : Profile method — Nominal characteristics of contact (stylus) instruments —

European Committee for Standardization (CEN), Domestic flow instrument

EN ISO 12179:2022 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
EN ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Calibration of Contact (Stylus) Instruments
EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
FprEN ISO 12179:2021 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO/FDIS 12179:2021)
EN ISO 3274:1997 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Nominal Characteristics of Contact (Stylus) Instruments
EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014)

International Organization for Standardization (ISO), Domestic flow instrument

ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
ISO/CD 25178-601 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments
ISO 3274:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments
ISO/DIS 25178-601:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Design and characteristics of contact (stylus) instruments
ISO 12179:2000/cor 1:2003 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments; Technical Corrigendum 1
ISO/CD 25178-602 Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
ISO 3274:1996/cor 1:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments; Technical Corrigendum 1
ISO/CD 25178-603 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
ISO/CD 25178-605 Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments

Lithuanian Standards Office , Domestic flow instrument

LST EN ISO 12179:2001 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000)
LST EN ISO 3274:2001 Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996)
LST EN ISO 12179:2001/AC:2008 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000/Cor 1:2003)
LST EN ISO 25178-601:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)

AENOR, Domestic flow instrument

UNE-EN ISO 12179:2001 Geometrical Product Specifications (GPS) - Surface texture: Profil method - Calibration of contact (stylus) instruments. (ISO 12179:2000)
UNE-EN ISO 3274:1998 GEOMETRICAL PRODUCT SPECIFICATION (GPS). SURFACE TEXTURE: PROFILE METHOD. NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS. (ISO 3274:1996).
UNE-EN ISO 25178-601:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)

American Society for Testing and Materials (ASTM), Domestic flow instrument

ASTM D7133-11 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids

Professional Standard - Machinery, Domestic flow instrument

JB/T 56206.1-1999 Product quality classification of FS and FZ series silicon carbide valve arresters for AC system (for internal use)

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, Domestic flow instrument

CEPT T/R 20-07 E-1988 Free Circulation@ for Use in Different Countries@ of Low-Power Mobile and Portable Transmitter-Receivers in the 27 MHz Band (PR 27 Equipment@ Recommendation T/R 20- 02)

国家能源局, Domestic flow instrument

NB/T 41003-2011 Product quality classification of self-healing shunt capacitors for AC power systems with nominal voltage 1000V and below

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Domestic flow instrument

GB/T 33523.601-2017 Geometrical product specifications (GPS)—Surface texture: Areal—Part 601: Nominal characteristics of contact (stylus) instruments

Aerospace, Security and Defence Industries Association of Europe (ASD), Domestic flow instrument

ASD-STAN PREN 2592-1989 Aerospace Series Three-Pole Circuit Breakers Temperature Compensated Rated Currents up to 25 A Product Standard (Edition 1)