ZH
RU
ES
Equipment Test Instrument
Equipment Test Instrument, Total:42 items.
In the international standard classification, Equipment Test Instrument involves: Power stations in general, Power transmission and distribution networks, Equipment for the chemical industry, Mechanical testing, Diagnostic, maintenance and test equipment, Insulating fluids, Geology. Meteorology. Hydrology, Medical equipment.
Professional Standard - Electricity, Equipment Test Instrument
- DL/T 849.3-2004 General technical specification of test instruments used for power equipments Part 3: route test instrument for power cable
- DL/T 849.3-2019 General Specifications for Special Test Instruments for Power Equipment Part 3: Cable Router
- DL/T 849.1-2004 General technical specification of test instruments used for power equipments Part 1: fault flashover test instrument for power cable
- DL/T 849.1-2019 General technical requirements for special test instruments for electric power equipment Part 1: Cable fault flash tester
- DL/T 849.2-2004 General technical specification of test instruments used for power equipments Part 2: fault locator for power cable
- DL/T 849.2-2019 General Specifications for Special Test Instruments for Power Equipment Part 2: Cable Fault Detector
- DL/T 849.4-2004 General technical specification of test instruments used for power equipments Part 4: very low frequency high voltage generator
- DL/T 849.5-2004 General technical specification of test instruments used for power equipments Part 5: oscillating wave high voltage generator
- DL/T 849.5-2019 General Specifications for Special Test Instruments for Power Equipment Part 5: Oscillating Wave High Voltage Generator
- DL/T 849.6-2004 General technical specification of test instruments used for power equipments Part 6: high voltage resonant test system
- DL/T 849.6-2016 General Specifications for Special Test Instruments for Power Equipment Part 6: High Voltage Resonance Test Device
- DL/T 1694.4-2017 Calibration specification for high voltage testing instruments and equipment Part 4: Insulating oil withstand voltage tester
- DL/T 1694.2-2017 Calibration specification for high-voltage testing instruments and equipment Part 2: Power transformer tap-changer tester
- DL/T 1694.3-2017 Calibration specification for high-voltage testing instruments and equipment Part 3: High-voltage switch action characteristic tester
- DL/T 1694.5-2017 Calibration specifications for high-voltage testing instruments and equipment Part 5: Zinc oxide arrester resistive current tester
- DL/T 1694.6-2020 Calibration specifications for high-voltage testing instruments and equipment Part 6: Ultra-low frequency dielectric loss tester for power cables
- DL/T 1694.7-2020 Calibration specifications for high-voltage testing instruments and equipment Part 7: Electrical measurement of integrated protection, measurement and control devices
- DL/T 1694.1-2017 Calibration specifications for high-voltage testing instruments and equipment Part 1: UHF partial discharge on-line monitoring device
Institute of Electrical and Electronics Engineers (IEEE), Equipment Test Instrument
- IEEE Std 1554-2005 IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
- IEEE Std P1554/D15d, Apr 2005 IEEE Draft Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
- IEEE Std P1554/D15a Unapproved IEEE Draft Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis (Superseded by the Approved IEEE Draft)
ES-AENOR, Equipment Test Instrument
British Standards Institution (BSI), Equipment Test Instrument
- BS EN IEC 60645-6:2022 Tracked Changes. Electroacoustics. Audiometric equipment. Instruments for the measurement of otoacoustic emissions
Professional Standard - Chemical Industry, Equipment Test Instrument
- HG/T 2382-1992 General technical requirements for rubber testing instruments and equipment
工业和信息化部, Equipment Test Instrument
- HG/T 2382-2022 General technical requirements for rubber testing instruments and equipment
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Equipment Test Instrument
- ASHRAE 4301-1999 Measurement of Frost Characteristics on Heat Exchanger Fins Part 1: Test Facility and Instrumentation (RP-824)
Society of Automotive Engineers (SAE), Equipment Test Instrument
- SAE J211-2-2001 Instrumentation for Impact Test Part 2 Photographic instrumentation
Association Francaise de Normalisation, Equipment Test Instrument
- NF EN ISO 4787:2021 Verrerie et matériel en plastique de laboratoire - Instruments volumétriques - Méthodes d'essai de la capacité et d'utilisation
International Telecommunication Union (ITU), Equipment Test Instrument
- ITU-T O.3-1992 Climatic Conditions and Relevant Tests for Measuring Equipment - Specifications of Measuring Equipment (Study Group IV) 7 pp
Professional Standard - Water Conservancy, Equipment Test Instrument
- SL 144-1995 Check method of water environmental detecting instrument and experimental equipment
- SL 144-1995(条文说明) Calibration (inspection) method of water environment testing instruments and test equipment
Professional Standard - Energy, Equipment Test Instrument
- DL/T 1694.8-2021 Calibration specification for high voltage testing instruments and equipment Part 8: Power capacitance and inductance tester
- DL/T 1694.9-2021 Calibration specification for high voltage testing instruments and equipment Part 9: Empty and load loss tester for power transformers
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Equipment Test Instrument
- GB/T 34807-2017 General technical specifications for inspection and test of geotechnical engineering instruments & equipment
HU-MSZT, Equipment Test Instrument
未注明发布机构, Equipment Test Instrument
- BS EN ISO 22232-1:2020 Tracked Changes. Non-destructive testing. Characterization and verification of ultrasonic test equipment. Instruments
American Society for Testing and Materials (ASTM), Equipment Test Instrument
- ASTM F1839-08 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
- ASTM F1839-97 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
- ASTM F1839-08(2016) Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
- ASTM F1839-08(2021) Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Equipment Test Instrument
- IEEE 1554 ERTA-2013 Errata to Recommended Practice for Inertial Sensor Test Equipment@ Instrumentation@ Data Acquisition@ and Analysis