ZH
RU
ES

self-eclipse

self-eclipse, Total:498 items.

In the international standard classification, self-eclipse involves: Motor cycles and mopeds, Cycles, Energy and heat transfer engineering in general, Valves, Adhesives, Interface and interconnection equipment, Telecommunication systems, Company organization and management, Components for aerospace construction, Corrosion of metals, Shipbuilding and marine structures in general, Power stations in general, Wastes, Applications of information technology, Installations in buildings, Industrial automation systems, Automatic controls for household use, Buildings, Welding, brazing and soldering, Fasteners for aerospace construction, Open systems interconnection (OSI), Fasteners, Materials for aerospace construction, Paints and varnishes, Networking, Iron and steel products, Telecontrol. Telemetering, Power transmission and distribution networks, Road vehicles in general, Vocabularies, Testing of metals, Road vehicle systems, Character sets and information coding, Radiocommunications, Transport, Protective equipment, Environmental protection.


IETF - Internet Engineering Task Force, self-eclipse

  • RFC 951-1985 Bootstrap Protocol (BOOTP)
  • RFC 5240-2008 Protocol Independent Multicast (PIM) Bootstrap Router MIB
  • RFC 5498-2009 IANA Allocations for Mobile Ad Hoc Network (MANET) Protocols
  • RFC 6827-2013 Automatically Switched Optical Network (ASON) Routing for OSPFv2 Protocols
  • RFC 6130-2011 Mobile Ad Hoc Network (MANET) Neighborhood Discovery Protocol (NHDP)
  • RFC 7466-2015 An Optimization for the Mobile Ad Hoc Network (MANET) Neighborhood Discovery Protocol (NHDP)

PL-PKN, self-eclipse

  • PN H04637-1972 Corrosion protection Corrosion tests in natural atmospheric conditions
  • PN H04627-1988 Corrosion of metals Outdor tests in natural marine environment

SAE - SAE International, self-eclipse

  • SAE AMS5640R-1996 Steel@ Corrosion Resistant@ Bars@ Wire@ and Forgings 18Cr - 9.0Ni Free Machining (UNS S30300 (Type 1)) (UNS S30323 (Type 2)) (UNS S30310 (Type 3))
  • SAE AMS5640U-2007 Steel@ Corrosion-Resistant@ Bars@ Wire@ and Forgings 18Cr - 9.0Ni Free Machining (UNS S30300 (Type 1); UNS S30323 (Type 2); UNS S30310 (Type 3))
  • SAE AMS5640S-2002 Steel@ Corrosion-Resistant@ Bars@ Wire@ and Forgings 18Cr - 9.0Ni Free Machining (UNS S30300 (Type 1); UNS S30323 (Type 2); UNS S30310 (Type 3))
  • SAE AMS5610P-2018 Steel@ Corrosion and Heat-Resistant@ Bars@ Wire@ and Forgings 12.5Cr - Low Carbon (SAE 51416@ 51416Se) Free-Machining (UNS S41600 and UNS S41623)
  • SAE AS81935/9-2006 "BEARING@ PLAIN@ ROD END@ SELF-ALIGNING@ SELFLUBRICATING@ NARROW@ INTERNALLY THREADED@ CORROSION RESISTANT (CRES) -65 TO +325 °F,"
  • SAE AMS5762-1971 STEEL BARS AND FORGINGS@ CORROSION RESISTANT 17Cr – 5.8Mn – 5.8Ni – 2.0Cu Free Machining
  • SAE AS81935/9A-2011 "BEARING@ PLAIN@ ROD END@ SELF-ALIGNING@ SELF-LUBRICATING@ NARROW@ INTERNALLY THREADED@ STEEL@ CORROSION RESISTANT (CRES)-65 TO +325 °F,"
  • SAE AMS4674E-1987 Alloy Bars and Forgings@ Corrosion Resistant 67Ni - 30Cu - 0.04S Free Machining
  • SAE AMS5659P-2014 Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu (UNS S15500)
  • SAE AMS5659N-2012 Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr – 4.5Ni – 0.30Cb (Nb) – 3.5Cu Consumable Remelted@ Solution Heat Treated@ Precipitation Hardenable (UNS S15500)
  • SAE AMS5659J-1998 Steel@ Corrosion Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr - 4.5Ni - 0.30Cb - 3.5Cu Consumable Electrode Melted Solution Heat Treated@ Precipitation Hardenable (UNS S15500)
  • SAE AMS5659M-2008 Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr – 4.5Ni – 0.30Cb (Nb) – 3.5Cu Consumable Remelted@ Precipitation Hardenable (UNS S15500)
  • SAE AMS5649E-1994 Steel@ Corrosion and Heat Resistant@ Bars@ Wire@ and Forgings 18Cr - 13Ni - 2.1Mo Free Machining Solution Heat Treated (UNS J92200)
  • SAE AMS5659G-1990 Steel@ Corrosion Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr - 4.5Ni - 0.30Cb - 3.5Cu Consumable Electrode Melted Solution Heat Treated@ Precipitation Hardenable (UNS S15500)
  • SAE AMS5659R-2015 Steel@ Corrosion-Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu (UNS S15500)
  • SAE AMS5659K-1998 Steel@ Corrosion Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr - 4.5Ni - 0.30Cb - 3.5Cu Consumable Electrode Melted Solution Heat Treated@ Precipitation Hardenable (UNS S15500)
  • SAE AMS5649F-2001 Steel@ Corrosion and Heat-Resistant@ Bars@ Wire@ and Forgings 18Cr - 13Ni - 2.1Mo Free Machining Solution Heat Treated (UNS J92200)
  • SAE AMS5659H-1995 Steel@ Corrosion Resistant@ Bars@ Wire@ Forgings@ Rings@ and Extrusions 15Cr - 4.5Ni - 0.30Cb - 3.5Cu Consumable Electrode Melted Solution Heat Treated@ Precipitation Hardenable (UNS S15500)
  • SAE AMS5659A-1966 STEEL BARS@ FORGINGS AND RINGS@ CORROSION RESISTANT 15Cr - 5Ni - 4Cu Consumable Electrode Melted
  • SAE AMS5659-1965 STEEL BARS@ FORGINGS AND RINGS@ CORROSION RESISTANT 15Cr - 5Ni - 4Cu Consumable Electrode Melted
  • SAE AMS5649H-2018 Steel@ Corrosion and Heat-Resistant@ Bars@ Wire@ and Forgings 18Cr - 13Ni - 2.1Mo Free Machining Solution Heat Treated (UNS J92200)
  • SAE AMS4674D-1975 ALLOY BARS AND FORGINGS@ CORROSION RESISTANT 67Ni - 30Cu - 0.04S Free Machining (UNS N04405)
  • SAE AMS5349B-1984 Steel Castings@ Investment@ Corrosion Resistant 13Cr Free Machining@ Hardened and Tempered (UNS J91161)
  • SAE AMS4674H-2018 Nickel - Copper Alloy@ Corrosion-Resistant@ Bars and Forgings 67Ni - 30Cu - 0.04S Free Machining (UNS N04405)
  • SAE AS27643/1-2011 BEARING@ BALL@ AIRFRAME@ ANTI-FRICTION@ SELF-ALIGNING@ DOUBLE ROW@ HEAVY DUTY@ CORROSION RESISTANT NITROGEN STEEL (CREN)
  • SAE AMS5618D-1994 Steel@ Corrosion Resistant@ Bars@ Wire@ and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) Consumable Electrode Vacuum Melted (UNS S44004)
  • SAE AMS5618E-2000 Steel@ Corrosion Resistant@ Bars@ Wire@ and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) Consumable Electrode Vacuum Melted (UNS S44004) (UNS S44004)
  • SAE AMS7250-1961 NUTS@ SELF-LOCKING@ CORROSION AND HEAT RESISTANT High Strength@ Prevailing Torque@ All-Metal 1200 F
  • SAE AMS5618J-2017 Steel@ Corrosion-Resistant@ Bars@ Wire@ and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (440C) Consumable Electrode Vacuum Melted (UNS S44004)
  • SAE AS27643/1A-2017 BEARING@ BALL@ AIRFRAME@ ANTI-FRICTION@ SELF-ALIGNING@ DOUBLE ROW@ HEAVY DUTY@ CORROSION RESISTANT NITROGEN STEEL (CREN)
  • SAE AMS5659C-1976 STEEL BARS@ FORGINGS AND RINGS@ CORROSION RESISTANT 15Cr - 4.5Ni - 0.30(Cb + Ta) - 3.5Cu Consumable Electrode Melted (UNS S15500)
  • SAE AS27645/1A-2016 BEARING@ BALL@ AIRFRAME@ ANTI-FRICTION@ SELF-ALIGNING@ LIGHT AND HEAVY DUTY@ CORROSION RESISTANT NITROGEN STEEL (CREN)
  • SAE AMS5734K-2006 Steel@ Corrosion and Heat-Resistant@ Bars@ Wire@ Forgings@ and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted@ 1650 °F (899 °C) Solution Heat Treated (UNS S66286)
  • SAE AMS5748A-1992 STEEL BARS@ FORGINGS@ AND RINGS@ CORROSION RESISTANT 14Cr - 13.5Co - 5.0Mo - 0.5Ni - 0.20V Premium Quality@ Consumable Electrode Melted (UNS S65770)

Society of Automotive Engineers (SAE), self-eclipse

  • SAE AMS5610-1939 STEEL, CORROSION RESISTANT 13 Chromium (Free Machining)
  • SAE AMS5610B-1944 STEEL, CORROSION RESISTANT 13 Chromium (Free Machining)
  • SAE AMS5640C-1948 STEEL, CORROSION RESISTANT 18Cr - 9Ni Free Machining
  • SAE AMS5610A-1942 STEEL, CORROSION RESISTANT 13 Chromium (Free Machining)
  • SAE AMS5640-1939 STEEL, CORROSION RESISTANT 18 Chromium - 8 Nickel (Free Machining)
  • SAE AMS5640B-1945 STEEL, CORROSION RESISTANT 18 Chromium 8 Nickel (Free Machining)
  • SAE AMS5640A-1942 STEEL, CORROSION RESISTANT 18 Chromium - 8 Nickel (Free Machining)
  • SAE AMS5640F-1961 STEEL, CORROSION RESISTANT 18Cr - 9Ni (SAE 30303 and 30303Se) Free Machining
  • SAE AMS5632-1942 STEEL, CORROSION RESISTANT 17 Chromium - .5 Molybdenum (High Carbon) (Free Machining)
  • SAE AMS5649-1951 STEEL, CORROSION AND HEAT RESISTANT 18Cr - 13Ni - 2.1Mo Free Machining
  • SAE AMS5610C-1945 STEEL, CORROSION RESISTANT 13 Chromium (Low Carbon) - Hardenable Free Machining
  • SAE AMS5620-1945 STEEL, CORROSION RESISTANT 13 Chromium (Medium Carbon) - Hardenable Free Machining
  • SAE AMS5642-1993 STEEL, CORROSION AND HEAT RESISTANT 18Cr - 11Ni - Cb (Free Machining)
  • SAE AS81935/7A-2011 Bearing, Plain Rod End, Self-Aligning, Self-Lubricating, Wide, Internally Threaded, Steel, Corrosion Resistant (CRES) -65 to +325 °F
  • SAE AS81935/6A-2011 Bearing, Plain Rod End, Self-Aligning, Self-Lubricating, Wide Externally Threaded, Steel, Corrosion Resistant (CRES) -65 to +325 °F
  • SAE AMS4674E-1992 ALLOY BARS AND FORGINGS, CORROSION RESISTANT 67Ni - 30Cu - 0.04S Free Machining
  • SAE AS81935/7-2006 BEARING, PLAIN ROD END, SELF-ALIGNING, SELFLUBRICATING, WIDE, INTERNALLY THREADED, STEEL, CORROSION RESISTANT (CRES) -65 TO +325 °F
  • SAE AS81935/6-2006 BEARING, PLAIN ROD END, SELF-ALIGNING, SELFLUBRICATING, WIDE, EXTERNALLY THREADED, STEEL, CORROSION RESISTANT (CRES) -65 TO +325 °F
  • SAE AS81935/8-2011 Bearing, Plain, Rod End, Self-Aligning, Self-Lubricating, Narrow, Externally Threaded, Steel, Corrosions Resistant (CRES) -65 to +325 °F
  • SAE AMS5640V-2016 Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9.0Ni Free Machining
  • SAE AMS5640G-1966 STEEL BARS AND FORGINGS, CORROSION RESISTANT 18Cr - 9Ni (SAE 30303 and 30303Se) Free Machining
  • SAE AMS5640M-1979 STEEL BARS AND FORGINGS, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30303, 30303Se, 30303Mod) Free Machining
  • SAE AMS5640J-1969 STEEL BARS AND FORGINGS, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30303, 30303Se, 30303Mod) Free Machining
  • SAE AMS5649A-1971 STEEL BARS AND FORGINGS, CORROSION AND HEAT RESISTANT 18Cr - 13Ni - 2.1Mo Free Machining
  • SAE AMS5659B-1966 STEEL BARS, FORGINGS, AND RINGS, CORROSION RESISTANT 15Cr - 5Ni - 4Cu Consumable Electrode Melted
  • SAE AMS5640L-1972 STEEL BARS AND FORGINGS, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30303, 30303Se, 30303Mod) Free Machining
  • SAE AMS5640H-1969 STEEL BARS AND FORGINGS, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30303, 30303Se, 30303Mod) Free Machining
  • SAE AMS5649B-1976 STEEL BARS AND FORGINGS, CORROSION AND HEAT RESISTANT 18Cr - 13Ni - 2.1Mo Free Machining
  • SAE AMS5640K-1971 STEEL BARS AND FORGINGS, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30303, 30303Se, 30303Mod) Free Machining
  • SAE AMS5349B-1995 STEEL CASTINGS, INVESTMENT, CORROSION RESISTANT 13Cr Free Machining, Hardened and Tempered
  • SAE AMS5610E-1952 STEEL, CORROSION AND MODERATE HEAT RESISTANT 13Cr - Low Carbon (SAE 51416F) Free Machining
  • SAE AMS5620B-1952 STEEL, CORROSION AND MODERATE HEAT RESISTANT 13Cr (0.30-0.40C) (SAE 51420F) Free Machining
  • SAE AMS5610G-1967 STEEL, CORROSION AND MODERATE HEAT RESISTANT 13Cr - Low Carbon (SAE 51416F) Free Machining
  • SAE AMS5610F-1965 STEEL, CORROSION AND MODERATE HEAT RESISTANT 13Cr - Low Carbon (SAE 51416F) Free Machining
  • SAE AMS5640W-2023 Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9.0Ni Free Machining
  • SAE AMS5349F-2019 Steel, Corrosion-Resistant, Investment Castings 13Cr Free Machining; Hardened and Tempered
  • SAE J3224-2022 V2X Sensor-Sharing for Cooperative and Automated Driving
  • SAE AMS5741B-1960 STEEL, CORROSION AND HEAT RESISTANT 13.5Cr - 26Ni - 1.75Mo - 3Ti Consumable Electrode Vacuum Melted
  • SAE AMS5741A-1959 STEEL, CORROSION AND HEAT RESISTANT 13.5Cr - 26Ni - 1.75Mo - 3Ti Consumable Electrode Vacuum Melted
  • SAE AMS5741-1959 STEEL, CORROSION AND HEAT RESISTANT 13.5Cr - 26Ni - 1.75Mo - 3Ti Consumable Electrode Vacuum Melted
  • SAE TS53-2-2004 TS53 Manufacturing Specification for Rivet, Blind, Self-Plugging, Interference Lock (Avedel), Corrosion-Resisting Steel
  • SAE AMS5349C-2000 Steel, Corrosion Resistant, Investment Castings 13Cr Free Machining; Hardened and Tempered
  • SAE AMS5618-1970 STEEL BARS AND FORGINGS, CORROSION RESISTANT 17Cr - 0.50Mo (0.95 - 1.20C) (SAE 51440C) Consumable Electrode Melted
  • SAE AMS5622-1969 STEEL BARS, FORGINGS, TUBING AND RINGS, CORROSION RESISTANT 17Cr - 4.0Ni - 4.0Cu Consumable Electrode Melted
  • SAE AGS3921-3-2008 AGS3921 Rivet, Blind, 100° CSK Head, Self-Plugging, Interference Lock Corrosion Resisting Steel (Cherry Aerospace)
  • SAE AGS3920-3-2008 AGS3920 Rivet, Blind, Snap Head, Self-Plugging, Interference Lock Corrosion Resisting Steel (Cherry Aerospace)
  • SAE AMS5746-1960 ALLOY, CORROSION AND HEAT RESISTANT 15Cr - 45Ni - 4W - 4Mo - 3Ti - 1Al Consumable Electrode Vacuum Melted
  • SAE AMS5746B-1968 ALLOY, CORROSION AND HEAT RESISTANT 15Cr - 45Ni - 4.1Mo - 4.1W - 3.0Ti - 1.0Al Consumable Electrode Vacuum Melted
  • SAE AMS5746A-1966 ALLOY, CORROSION AND HEAT RESISTANT 15Cr - 45Ni - 4W - 4Mo - 3Ti - 1Al Consumable Electrode Vacuum Melted
  • SAE AMS5748-2002 STEEL BARS, FORGINGS, AND RINGS, CORROSION RESISTANT 14Cr - 13.5Co - 5.0Mo - 0.50Ni - 0.20V Premium Quality, Consumable Electrode Melted
  • SAE AMS5618B-1985 STEEL BARS AND FORGINGS, CORROSION RESISTANT 17Cr - 0.50Mo (0.95 - 1.20C) (SAE 51440C) Consumable Electrode Vacuum Melted
  • SAE AMS5618C-1988 STEEL BARS AND FORGINGS, CORROSION RESISTANT 17Cr - 0.50Mo (0.95 - 1.20C) (SAE 51440C) Consumable Electrode Vacuum Melted
  • SAE AMS5734-1960 STEEL, CORROSION AND HEAT RESISTANT 15Cr - 26Ni - 1.3Mo - 2.1Ti - 0.3V Consumable Electrode Melted Annealed (1650 F)
  • SAE AGS3922-4-2008 AGS3922 Rivet, Blind, Snap Head, Self-Plugging, Interference Lock Corrosion Resisting Steel, Cadmium Coated (Cherry Aerospace)
  • SAE EPR2020024-2020 Unsettled Issues on Human-Robot Collaboration and Automation in Aerospace Manufacturing
  • SAE AS27645/1-2011 Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Light and Heavy Duty, Corrosion Resistant Nitrogen Steel (CREN)
  • SAE AMS5632G-2000 Steel, Corrosion Resistant, Bars, Wire, and Forgings 17Cr 0.5Mo (0.95-1.20C) (SAE 51440F) Free-Machining, Annealed
  • SAE AMS5632H-2006 Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.50Mo (0.95 - 1.20C) (SAE 51440F) Free-Machining, Annealed UNS S44020 (Type I) or UNS S44023 (Type II)
  • SAE MA3279B-1995 Insert, Screw Thread, Helical Coil, Metric Series, Free Running, CRES, Uncoated
  • SAE AMS5649C-1982 STEEL BARS AND FORGINGS, CORROSION AND HEAT RESISTANT 18Cr - 13Ni - 2.1Mo Free Machining Solution Heat Treated
  • SAE AMS5741C-1963 STEEL BARS AND FORGINGS, CORROSION AND HEAT RESISTANT 13.5Cr - 26Ni - 1.75Mo - 3Ti Consumable Electrode Vacuum Melted
  • SAE AGS3923-4-2008 AGS3923 Rivet, Blind, 100° CSK Head, Self-Plugging, Interference Lock Corrosion Resisting Steel, Cadmium Coated (Cherry Aerospace)
  • SAE AS46788-4-1997 AS46788 Rivet, Blind, Self-Plugging, Flush Break, Mechanically Locked Stem, Corrosion-Resisting Steel, Universal Head Cadmium Plated
  • SAE AMS5803F-2010 Steel, Corrosion and Heat-Resistant, Welding Wire 16.4Cr 4.8Ni 0.22Cb (Nb) 3.6Cu Consumable Electrode or Vacuum Induction Melted
  • SAE AMS5610M-2000 Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings 12.5Cr Low Carbon (SAE 51416, 51416Se) Free-Machining
  • SAE AMS5610N-2006 Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings 12.5Cr Low Carbon (SAE 51416, 51416Se) Free-Machining
  • SAE AMS5773-1976 STEEL BARS, FORGINGS, TUBING, AND RINGS, CORROSION RESISTANT 15Cr - 6.5Ni - 0.75Mo - 0.20 (Cb + Ta) 1.5Cu Consumable Electrode Melted
  • SAE AMS5734A-1966 STEEL, CORROSION AND HEAT RESISTANT 15Cr - 26Ni - 1.3Mo - 2.1Ti - 0.3V Consumable Electrode Melted 1650 F (899 C) Annealed
  • SAE AS46791-4-1997 AS46791 Rivet, Blind, Self-Plugging, Flush Break, Mechanically Locked Stem, Corrosion Resisting Steel, 100° Countersunk Head, Unplated
  • SAE AS46790-4-1997 AS46790-790L Rivet, Blind, Self-Plugging, Flush Break, Mechanically Locked Stem, Corrosion Resisting Steel, 100° Countersunk Head, Cadmium Plated
  • SAE AS64401-1-2006 AS64401-401L Rivet, Blind, Self Plugging, Flush Break, Mechanically Locked Stem, 100° Countersunk Head, Corrosion Resisting Steel, Cadmium Plated
  • SAE AS64404-1-2006 AS64404-404L Rivet, Blind, Self Plugging, Flush Break, Mechanically Locked Stem, Universal Head, Corrosion-Resisting Steel, Cadmium Plated

Professional Standard - Machinery, self-eclipse

  • JB/T 9237.1-1999 Operating conditions for industrial process measurement and control equipment.Corrosive and erosive influences

Korean Agency for Technology and Standards (KATS), self-eclipse

Group Standards of the People's Republic of China, self-eclipse

  • T/JSEBA 002-2022 Communication Protocol for Electric Bicycle
  • T/BIKE 6-2019 Shared Bicycles Communication Protocol
  • T/LLF 003-2023 Self-discipline code of conduct for the elderly service association
  • T/GDEVA 0003-2023 General specification for communication protocol of electric bicycle
  • T/CAEE 2-2021 Technical specifications of collaborative self-heating melting for waste printed circuit board
  • T/CEEIA 297-2018 Interface and Communication Protocol for MIG/MAG Automatic Welding Power Source
  • T/CWAN 0003-2018 Interface and Communication Protocol for MIG/MAG Automatic Welding Power Source
  • T/CWAN 0003-2018*T/CEEIA 297-2018 MIG/MAG automatic welding power supply interface and communication protocol
  • T/CWAN 0003-2018T/CEEIA 297-2018 MIG/MAG automatic welding power supply interface and communication protocol
  • T/CAMETA 001012-2022 Automation System and Integration - Specification of Collaborative Model of Manufacturing Supply Chain
  • T/SXSAE 002-2023 The Design of the Platform for the Autonomous Vehicle-Infrastructure Cooperative Systems the Reference Logical Architecture
  • T/ITS 0135-2020 Data exchange standard for high level automated driving vehicle based on Cooperative intelligent transportation system
  • T/CSAE 158-2020 Data exchange standard for high level automated driving vehicle based on cooperative intelligent transportation system
  • T/CMAX 43005-2023 Autonomous driving vehicle virtual and real combined test platform data interaction protocol
  • T/SHJX 021-2021 Vehicle infrastructure cooperative systems intelligent classification and evaluation method of parking lot for autonomous driving

ISA - International Society of Automation, self-eclipse

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., self-eclipse

  • IEEE 802.3 PART 4-2000 Auto-Negotiation Function@ Type 1000BASE-X (IEEE Computer Society Document)
  • IEEE P1857.7/D3-2018 Draft Standard for Adaptive Streaming (IEEE Computer Society)
  • IEEE 61850-9-3-2016 Communication networks and systems for power utility automation – Part 9-3: Precision time protocol profile for power utility automation

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, self-eclipse

  • GB/T 26757-2011 General technical rules for voluntary agreement of energy conservation
  • GB/T 19582.1-2008 Modbus industrial automation network specification.Part 1:Modbus application protocol
  • GB/Z 19582.1-2004 Modbus Industrial automation network specification Part 1:Modbus application protocol
  • GB/T 19897.4-2005 Automatic mater reading system lower layer communication protocol.Part 4:Data link layer using HDLC protocol
  • GB/T 16721-1996 Industrial automation systems--Specification of subsets of the protocol for the manufacturing message specification
  • GB/T 19582.3-2008 Modbus industrial automation network specification.Part 3:Modbus protocol implementation guide over TCP/IP
  • GB/Z 19582.3-2004 Modbus industrial automation network specification Part 3:Modbus protocol implementation guide over TCP/IP
  • GB/T 19582.2-2008 Modbus industral automation network specification.Part 2:Modbus protocol implementation guide over serial link
  • GB/Z 19582.2-2004 Modbus industrial automation network specification Part 2:Modbus protocol implementation guide over serial link
  • GB/T 16720.2-1996 Industrial automation systems--Manufacturing Message Specification (MMS) --Part 2: Protocol specification
  • GB/T 16720.2-2005 Industrial automation systems-Manufacturing message specification-Part 2:Protocol specification

United States Navy, self-eclipse

National Association of Corrosion Engineers (NACE), self-eclipse

  • NACE TPC 11-1998 A Guide to the Organization of Underground Corrosion-Control Coordinating Committees
  • NACE TPC 11-2008 A Guide to the Organization of Underground Corrosion-Control Coordinating Committees (Item No. 25011)

API - American Petroleum Institute, self-eclipse

Association Francaise de Normalisation, self-eclipse

  • NF X41-029:1996 Self adhesive tapes. Determination of the water-soluble corrosive ions.
  • NF L22-531:1977 Self-locking clinch nuts, in E-Z 6 nct 25 corrosion resisting steel. ISO thread.
  • NF EN ISO 16484-5:2011 Systèmes d'automatisation et de gestion technique du bâtiment - Partie 5 : protocole de communication de données
  • NF EN 2944:2018 Série aérospatiale - Filets rapportés, à freinage interne, en acier résistant à la corrosion FE-PA3004
  • NF A05-200:1985 Physico-chemical testing - Calibration of the aggressivity of exposure localities under natural atmospheres
  • NF L24-985*NF EN 2944:2018 Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
  • NF P52-721-5*NF EN ISO 16484-5:2011 Building automation and control systems - Part 5 : data communication protocol
  • NF L22-517:1980 12 point self-locking flange nuts, in E-Z 6 nct 25 corrosion resisting steel. ISO thread.
  • NF C46-904-511*NF EN 61334-4-511:2001 Distribution automation using line carrier systems - Part 4-511 : data communications protocols - Systems management - CIASE protocol
  • NF C46-904-61*NF EN 61334-4-61:1999 Distribution automation using distribution line carrier systems. Part 4-61 : data communication protocols. Network layer. Connectionless protocol.
  • NF P52-723-1*NF EN 14908-1:2014 Open data communication in building automation, controls and building management - Control network protocol - Part 1 : protocol stack
  • NF EN 61334-4-511:2001 Automatisation de la distribution à l'aide de systèmes de communication à courants porteurs - Partie 4-511 : protocoles de communication de données - Administration de systèmes - Protocole CIASE
  • NF EN 2064:1992 Série aérospatiale - Rotules en acier résistant à la corrosion à garniture autolubrifante - Spécification technique.
  • NF EN 2288:2019 Série aérospatiale - Bague à épaulement, en acier resistant à la corrosion, à garniture autolubrifiante - Dimensions et charges

AENOR, self-eclipse

  • UNE-EN 12029:1996 SELF ADHESIVE TAPES. DETERMINATION OF THE WATER-SOLUBLE CORROSIVE IONS.
  • UNE 112083:2010 Measurement of free corrosion potential on steel reinforced concrete structures
  • UNE-EN 2944:1998 AEROSPACE SERIES. INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN CORROSION RESISTING STEEL FE-PA3004.
  • UNE-EN 2064:1993 AEROSPACE SERIES. BEARINGS SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF LUBRICATING LINER. THECNICAL SPECIFICATIONS.

US-AAMA, self-eclipse

  • AAMA 907-1996 Voluntary Specification for Corrosion Resistant Coatings on Carbon Steel Components
  • AAMA 907-2005 Voluntary Specification for Corrosion Resistant Coatings on Carbon Steel Components
  • AAMA 907-2012 Voluntary Specification for Corrosion Resistant Coatings on Carbon Steel Components
  • AAMA 907-2015 Voluntary Specification for Corrosion Resistant Coatings on Carbon Steel Components Used in Windows, Doors and Skylights

HU-MSZT, self-eclipse

American National Standards Institute （ANSI), self-eclipse

ANSI - American National Standards Institute, self-eclipse

  • INCITS 406-2005 Automation/Drive Interface Transport Protocol (ADT)
  • INCITS 472-2011 Information Technology – Automation/Drive Interface – Transport Protocol - 2 (ADT-2)

International Telecommunication Union (ITU), self-eclipse

German Institute for Standardization, self-eclipse

  • DIN 81249-2:2013-05 Corrosion of metals in sea water and sea atmosphere - Part 2: Free corrosion in sea water; Text in German and English
  • DIN 81249-2:1997 Corrosion of metals in sea water and sea atmosphere - Part 2: Free corrosion in sea water
  • DIN 65391:2002-11 Aerospace - Press nuts with MJ thread, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C
  • DIN 55665:2007 Paints and varnishes - Natural weathering of coatings - Determination of corrosion protection performance
  • DIN 55665:2022-11 Paints and varnishes - Natural weathering of coatings - Determination of corrosion protection performance
  • DIN EN ISO 3506-4:2010-04 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009); German version EN ISO 3506-4:2009
  • DIN 65477:2003-11 Aerospace - Press nuts, with MJ thread, closed type, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C
  • DIN EN 2944:2018 Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004; German and English version EN 2944:2018
  • DIN EN 2944:1998 Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting alloy FE-PA3004; German version EN 2944:1998
  • DIN EN 2944:2018-12 Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004; German and English version EN 2944:2018 / Note: To be replaced by DIN EN 2944 (2022-08).
  • DIN 65576:1991-08 Aerospace; quick-release pins in corrosion-resisting steel, single locked, with self-retaining cam lever release mechanism
  • DIN EN 61334-4-61:1999 Distribution automation using distribution line carrier systems - Part 4-61: Data communication protocols; network layer; connectionless protocol (IEC 61334-4-61:1998); German version EN 61334-4-61:1998, Text in English
  • DIN EN 14908-1:2007 Open Data Communication in Building Automation, Controls and Building Management - Building Network Protocol - Part 1: Protocol Stack; English version EN 14908-1:2005
  • DIN EN 14908-1:2014-08 Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 1: Protocol Stack; English version EN 14908-1:2014
  • DIN EN 2944:2022-08 Aerospace series - Insert, MJ screw thread, helical coil, self-locking, in corrosion resisting steel FE PA3004; German and English version ASD-STAN prEN 2944:2022 / Note: Date of issue 2022-07-08*Intended as replacement for DIN EN 2944 (2018-12).

Danish Standards Foundation, self-eclipse

  • DS/EN 12029:1997 Self adhesive tapes - Determination of the water-soluble corrosive ions
  • DS/EN ISO 3506-4:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws
  • DS/EN 2944:1998 Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
  • DS/ISO/IEC 9506-2:1991 Manufacturing message specification, MMS. Part 2: Protocol specification
  • DS/EN ISO 16484-5:2012 Building automation and control systems - Part 5: Data communication protocol
  • DS/EN 29506-2:1993 Industrial automation systems. Manufacturing Message Specification. Part 2: Protocol specification
  • DS/ISO 9506-2:2004 Industrial automation systems - Manufacturing Message Specification - Part 2: Protocol specification

Lithuanian Standards Office , self-eclipse

  • LST EN 12029-2000 Self-adhesive tapes - Determination of the water-soluble corrosive ions
  • LST EN 2944-2001 Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004

British Standards Institution (BSI), self-eclipse

  • BS EN 12029:1997 Self adhesive tapes - Determination of the water-soluble corrosive ions
  • PAS 44010:2022 Design, implementation and maintenance of voluntary agreements. Specification
  • BS EN 2064:1992 Bearings, spherical plain in corrosion resisting steel with self lubricating liner - Technical specification
  • BS EN ISO 16484-5:2010 Building automation and control systems. Data communication protocol
  • BS EN ISO 16484-5:2011 Building automation and control systems. Data communication protocol
  • BS EN ISO 16484-5:2008+A1:2009 Building automation and control systems - Data communication protocol
  • BS EN ISO 16484-5:2012 Building automation and control systems. Data communication protocol
  • BS EN 2944:1998 Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
  • BS EN ISO 16484-5:2014 Building automation and control systems (BACS). Data communication protocol
  • BS EN ISO 16484-5:2017 Building automation and control systems (BACS). Data communication protocol
  • BS EN ISO 16484-5:2022 Building automation and control systems (BACS) - Data communication protocol
  • BS EN 61334-4-41:1998 Distribution automation using distribution line carrier systems - Data communication protocols - Application protocols - Distribution line message specification
  • BS EN 61334-4-42:1997 Distribution automation using distribution line carrier systems. Data communication protocols. Application protocols. Application layer
  • BS EN 61334-4-511:2001 Distribution automation using distribution line carrier systems. Data communication protocols. Systems management. CIASE protocol
  • BS EN 14908-1:2014 Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. Protocol Stack
  • BS EN 2287:2017 Aerospace series. Bush, plain, in corrosion resisting steel with self-lubricating liner. Dimensions and loads
  • BS EN 2287:1990 Specification for bushes plain, corrosion resisting steel with self-lubricating liner - Dimensions and loads
  • BS PD IEC/PAS 61850-9-3:2015 Communication networks and systems for power utility automation. Precision time protocol profile for power utility automation
  • BS EN 14908-1:2005 Open data communication in building automation, controls and building management. Building network protocol. Protocol stack
  • BS EN 61334-4-61:1998 Distribution automation using distribution line carrier systems. Data communication protocols. Network layer. Connectionless protocol
  • BS EN 3055:1994 Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Dimensions and loads
  • 21/30445574 DC BS EN 2944. Series. Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
  • BS EN 2288:1990 Specification for bushes flanged, corrosion resisting steel with self-lubricating liner - Dimensions and loads

European Committee for Standardization (CEN), self-eclipse

  • EN 12029:1996 Self adhesive tapes - Determination of the water-solubles corrosive ions
  • EN ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
  • prEN 2944-2021 Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
  • CEN EN ISO 16484-5:2008 Building automation and control systems — Part 5: Data communication protocol
  • EN ISO 16484-5:2003 Building automation and control systems - Part 5: Data communication protocolcity ISO 16484-5:2003; Supersedes ENV 1805-1:1998
  • EN ISO 16484-5:2014 Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO 16484-5:2014)
  • EN ISO 16484-5:2022 Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO 16484-5:2022)
  • EN 14908-1:2014 Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 1: Protocol Stack
  • EN 2944:1998 Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
  • prEN 29506-2-1993 Industrial automation systems; manufacturing message specification; part 2: protocol specification (ISO/IEC 9506-2:1990)

American Society for Testing and Materials (ASTM), self-eclipse

  • ASTM G119-93(1998) Standard Guide for Determining Synergism Between Wear and Corrosion
  • ASTM G119-09(2021) Standard Guide for Determining Synergism Between Wear and Corrosion
  • ASTM G119-04 Standard Guide for Determining Synergism Between Wear and Corrosion
  • ASTM G119-03 Standard Guide for Determining Synergism Between Wear and Corrosion
  • ASTM G119-09 Standard Guide for Determining Synergism Between Wear and Corrosion
  • ASTM G119-09(2016) Standard Guide for Determining Synergism Between Wear and Corrosion
  • ASTM A604/A604M-07(2017) Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
  • ASTM G113-01 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
  • ASTM G113-94 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
  • ASTM G113-05 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
  • ASTM G113-03 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
  • ASTM G113-06e1 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
  • ASTM G113-08 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
  • ASTM G113-14 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
  • ASTM A604-93(1998) Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

Professional Standard - Electricity, self-eclipse

  • DL/T 790.53-2004 Distribution automation using distribution line carrier systems-Part 5-3: Lower layer profilers-Spread spectrum adaptive wideband (SS-AW) profile
  • DL/Z 790.53-2004 Distribution automation using distribution line carrier systems-Part5-3:Lower layer profilers-Spread spectrum adaptive wideband(SS-AW)profile
  • DL/Z 790.52-2005 Distribution automation using distribution line carrier system.Part 5-2:Lower layer profilers.Frequency shift keying(FSK) profile
  • DL/Z790.52-2005 Distribution Automation Using Distribution Line Carrier Part 5-2: Low-Level Protocol Set Frequency-Shift Keying (FSK) Protocol
  • DL/T 790.4511-2006 Distribution automation using distribution line carrier systems Part 4-511: Data communication protocols Systems management CIASE protocol
  • DL/T 790.54-2004 Distribution automation using distribution line carrier systems-Part 5-4: Lower layer profilers-Multi-carrier modulation (MCM) profile
  • DL/T 790.442-2004 Distribution automation using distribution line carrier systems-Part 4-42: Data communication protocols Application protocols - Application layer
  • DL/Z 790.54-2004 Distribution automation using distribution line carrier systems-Part5-4:Lower layer profilers-Multi-carrier modulation(MCM)profile \
  • DL/T 790.461-2010 Distribution automation using distribution line carrier system.Part 4-61:Data communication protocols.Network layer.Connectionless protocol
  • DL/T 860.93-2019 Communication Networks and Systems for Electric Power Automation Part 9-3: Precise Time Protocol Profiles for Electric Power Automation Systems

ITE - Institute of Transportation Engineers, self-eclipse

  • LP-582-1999 ITS Handbook 2000—Recommendations from the World Road Association

Professional Standard - Electron, self-eclipse

  • SJ 20651-1997 Cryptographic protocol for the military digital secure automatic telephone network

Professional Standard - Post and Telecommunication, self-eclipse

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), self-eclipse

International Organization for Standardization (ISO), self-eclipse

  • ISO/TR 13345:1994 Industrial automation systems — Specification of subsets of the protocol for ISO/IEC 9506
  • ISO/CD 3506-4 Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws
  • ISO 16484-5:2007 Building automation and control systems - Part 5: Data communication protocol
  • ISO 16484-5:2003 Building automation and control systems - Part 5: Data communication protocol
  • ISO/IEC 19762:2016 Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary
  • ISO 9506-2:2000 Industrial automation systems — Manufacturing Message Specification — Part 2: Protocol specification
  • ISO 9506-2:2003 Industrial automation systems - Manufacturing Message Specification - Part 2: Protocol specification
  • ISO/IEC 9506-2:1990 Industrial automation systems; manufacturing message specification; part 2: protocol specification

未注明发布机构, self-eclipse

  • BS EN 2064:1992(2000) Bearings, spherical plain in corrosion resisting steel with self lubricating liner — Technical specification
  • DIN EN ISO 16484-5:2008 BACnet – A Data Communication Protocol for Building Automation and Control Networks
  • DIN EN ISO 16484-5:2011 BACnet — A Data Communication Protocol for Building Automation and Control Networks

ETSI - European Telecommunications Standards Institute, self-eclipse

  • GS NGP 002-2017 Next Generation Protocols (NGP); Self-Organizing Control and Management Planes (V1.1.1)

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, self-eclipse

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., self-eclipse

Aerospace Industries Association/ANSI Aerospace Standards, self-eclipse

  • AIA/NAS NAS 3310-1968 Gasket, Sealing, Aluminum Alloy and Corrosion-Resisting Steel, ASA Pipe Flanges (Rev. 4)
  • AIA/NAS NASM18064-1998 Setscrew, Hexagon Socket, Cup Point, 250 Degrees F, Self Locking Element, Corrosion Resisting Steel, Passivated
  • AIA/NAS NASM21043-2003 Nut, Self-Locking, 800 Degrees F, Reduced Hexagon, Reduced Height, Ring Base, Corrosion Resistant Steel Rev 2

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, self-eclipse

  • PREN 2287-1978 Bushes Plain Corrosion Resisting Steel with Self-Lubricating Liner - Dimensions (C1/24-01)

International Electrotechnical Commission (IEC), self-eclipse

  • IEC PAS 62573:2008 Real-time ethernet - Real-time automation protocol for industrial ethernet (RAPIEnet)
  • IEC 61334-4-511:2000 Distribution automation using distribution line carrier systems - Part 4-511: Data communication protocols; Systems management; CIASE protocol

GOSTR, self-eclipse

  • GOST R 58573-2019 The nature conservancy. Hydrosphere. Water quality. Risk-based control
  • GOST R 58525-2019 The nature conservancy. Hydrosphere. Water quality. Rules for setting the frequency of control

AIA/NAS - Aerospace Industries Association of America Inc., self-eclipse

  • NASM51023-1999 Setscrew-Hexagon Socket@ Cup Point@ Corrosion-Resisting Steel@ Passivated@ UNF-3A@ Plain and Self Locking
  • NASM51029-1998 Setscrew-Hexagon Socket@ Flat Point@ Corrosion-Resisting Steel@ Passivated@ UNC-3A@ Plain and Self-Locking
  • NASM51031-1998 Setscrew-Hexagon Socket@ Flat Point@ Corrosion-Resisting Steel@ Passivated@ UNF-3A@ Plain and Self-Locking
  • NASM51021-1998 Setscrew-Hexagon Socket@ Cup Point@ Corrosion-Resisting Steel@ Passivated@ UNC-3A@ Plain and Self-Locking
  • NASM14222-1999 Nut@ Self-Locking@ 450 Degrees F@ Hexagon@ Reduced Head Height@ Ring Base@ Corrosion Resistant Steel
  • NASM17829-1999 Nut@ self-locking@ hexagon@ regular height@ 250 deg F@ (non-metallic insert) non-corrosion-resistant Steel
  • NASM18064-1998 Setscrew@ Hexagon Socket@ Cup Point@ 250 Degrees F@ Self Locking Element@ Corrosion Resisting Steel@ Passivated
  • NASM21043-1999 Nut@ Self-Locking@ 800 Degrees F@ Reduced Hexagon@ Reduced Height@ Ring Base@ Corrosion Resistant Steel
  • NASM21042-2018 NUT@ SELF-LOCKING@ 450° F@ REDUCED HEXAGON@ REDUCED HEIGHT@ RING BASE@ NON-CORROSION RESISTANT STEEL (REV 2)

Military Standard of the People's Republic of China-General Armament Department, self-eclipse

  • GJB 9605.4-2019 Wireless Synchronous Self-Organizing Sensor Network Part 4: Application Layer Protocol
  • GJB 9605.3-2019 Wireless Synchronous Self-Organizing Sensor Networks Part 3: Network Layer Protocols

TH-TISI, self-eclipse

  • TIS 2453.4-2009 Mechanical properties of corrosion-resistant stainless-steel fasteners.part 4: tapping screws

CZ-CSN, self-eclipse

  • CSN 46 5333-1987 Nature conservation. Soil. Methods for determining the danger of soil erosion due to rain

European Association of Aerospace Industries, self-eclipse

  • AECMA PREN 2287-1978 Bushes Plain Corrosion Resisting Steel with Self-Lubricating Liner - Dimensions (C1/24-01)

RU-GOST R, self-eclipse

  • GOST ISO 3506-4-2014 Mechanical properties of corrosion-resistant stainless steel fasteners. Part 4. Tapping screws

Taiwan Provincial Standard of the People's Republic of China, self-eclipse

  • CNS 13740.11-1998 Industrial automation systems-Manufacturing message specification-Part 2: Protocol specification
  • CNS 13740-11-1998 Industrial automation systems-Manufacturing message specification-Part 2: Protocol specification

CEN - European Committee for Standardization, self-eclipse

  • EN ISO 16484-5:2017 Building automation and control systems (BACS) - Part 5: Data communication protocol
  • EN ISO 16484-5:2010 Building automation and control systems - Part 5: Data communication protocol
  • EN ISO 16484-5:2012 Building automation and control systems - Part 5: Data communication protocol
  • EN 2944:2018 Aerospace series - Inserts@ screw thread@ helical coil@ selflocking@ in corrosion resisting steel FE-PA3004

Institute of Electrical and Electronics Engineers (IEEE), self-eclipse

  • IEEE 1903.3-2017 IEEE Standard for Self-Organizing Management Protocols of Next Generation Service Overlay Network
  • IEEE Std 1903.3-2017 IEEE Standard for Self-Organizing Management Protocols of Next Generation Service Overlay Network

IEC - International Electrotechnical Commission, self-eclipse

  • PAS 62573-2008 Real-time Ethernet – Real-time Automation Protocol for Industrial Ethernet (RAPIEnet) (Edition 1.0)

国家市场监督管理总局、中国国家标准化管理委员会, self-eclipse

  • GB/T 28847.5-2021 Building automation and control systems—Part 5: Data communication protocol

KR-KS, self-eclipse

工业和信息化部, self-eclipse

  • YD/T 3978-2021 High-level autonomous driving data interaction content based on vehicle-road collaboration
  • YD/T 3467-2019 Technical requirements for secure wireless mesh (Mesh) self-organizing network protocols

BE-NBN, self-eclipse

Aerospace, Security and Defence Industries Association of Europe (ASD), self-eclipse

  • ASD-STAN PREN 2944-2017 Aerospace series - Inserts@ screw thread@ helical coil@ self-locking@ in corrosion resisting steel FE-PA3004 (Edition P 2)

Aerospace Industries Association, self-eclipse

  • AIA NASM24630-1998 Screw, Tapping-Thread Cutting, Types D,F,G or T, Pan Head, Cross Recessed, Corrosion Resisting Steel FSC 5305
  • AIA NASM14222-1999 Nut, Self-Locking, 450 Degrees F, Hexagon, Reduced Head Height, Ring Base, Corrosion Resistant Steel FSc 5310
  • AIA NASM51031-1998 Setscrew-Hexagon Socket, Flat Point, Corrosion-Resisting Steel, Passivated, UNF-3A, Plain and Self-Locking FSC 5305

ES-UNE, self-eclipse

  • UNE-EN 14908-1:2014 Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 1: Protocol Stack (Endorsed by AENOR in June of 2014.)

AT-ON, self-eclipse

  • ONORM EN 2064-1992 Aerospace series - Bearings, spherical piain in corrosion resisting steel with self-lubricating liner - Technical specification

ES-AENOR, self-eclipse

IT-UNI, self-eclipse

National Electrical Manufacturers Association（NEMA), self-eclipse

Japanese Industrial Standards Committee (JISC), self-eclipse

  • JIS B 3601:1993 Industrial automation systems -- Manufacturing message specification -- Part 2: Protocol specification

Jiangsu Provincial Standard of the People's Republic of China, self-eclipse

  • DB32/T 4349-2022 Technical Specifications for Data Transmission Extension Protocol of Pollution Source Automatic Monitoring System

  self-corrosion potential pitting potential, self eclipse, Product Self-Erosion, Self-erosion, total self-eclipse, self eclipse, self-eclipse, UV self-etching.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved