ZH
RU
ES

Measuring particle size

Measuring particle size, Total:500 items.

In the international standard classification, Measuring particle size involves: Particle size analysis. Sieving, Air quality, Fuels, Rubber and plastics products, Hydraulic fluids, Cork and cork products, Vocabularies, Domestic, commercial and industrial heating appliances, Plastics, Linear and angular measurements, Soil quality. Pedology, Petroleum products in general, Analytical chemistry, Clothes, Products of the chemical industry, Road vehicle systems, Construction materials, Natural gas, Fluid power systems, Aerospace electric equipment and systems, Cereals, pulses and derived products, Internal combustion engines, Test conditions and procedures in general, Power stations in general, Aerospace engines and propulsion systems, Structures of buildings, Testing of metals, Installations in buildings, Diagnostic, maintenance and test equipment, Raw materials for rubber and plastics, Metalliferous minerals, Geology. Meteorology. Hydrology, Wastes, Water quality, Compressors and pneumatic machines, Optical equipment, Fasteners, Physics. Chemistry, Textile machinery, Milk and milk products, Astronomy. Geodesy. Geography, Semiconducting materials, Lubricants, industrial oils and related products, Optics and optical measurements, Powder metallurgy, Chipless working equipment, Fertilizers, Environmental protection, Aerospace fluid systems and components, Ventilators. Fans. Air-conditioners, Small craft, Pulps, Road vehicles in general, Protective equipment, Graphic technology, Internal combustion engines for road vehicles, Headgear. Clothing accessories. Fastening of clothing.

Professional Standard - Hydroelectric Power, Measuring particle size

SD 313-1989 Method for measuring particle number and size distribution in oil (automatic particle counter method)

German Institute for Standardization, Measuring particle size

DIN 51455:2020-12 Liquid petroleum products - Determination of particle number and particle size in oils
DIN EN ISO 18846:2016 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
DIN 51455:2020 Liquid petroleum products - Determination of particle number and particle size in oils
DIN EN ISO 18846:2016-12 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016); German version EN ISO 18846:2016 / Note: To be replaced by DIN EN ISO 5370 (2022-03).
DIN 50452-2:2009-10 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 2: Determination of particles by optical particle counters
DIN EN ISO 11508:2018-04 Soil quality - Determination of particle density (ISO 11508:2017); German version EN ISO 11508:2017
DIN SPEC 51455:2018 Liquide petroleum products - Determination of particle number and particle size in oils
DIN EN 481:1993-09 Workplaces atmospheres; size fraction definitions for measurement of airborne particles; German version EN 481:1993
DIN EN ISO 1265:2007-05 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO 1265:2007); German version EN ISO 1265:2007
DIN EN 16450:2017-07 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
DIN EN ISO 29463-2:2019-05 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011); German version EN ISO 29463-2:2018
DIN ISO 4324:1983-12 Surface active agents; powders and granules; measurement of the angle of repose
DIN EN ISO 17200:2020-12 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020); German version EN ISO 17200:2020
DIN ISO 16000-34:2019-01 Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO 16000-34:2018)
DIN ISO 16000-34 Berichtigung 1:2019-05 Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO 16000-34:2018); Corrigendum 1
DIN 50452-2:1991 Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters
DIN EN ISO 29463-2:2019 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011)
DIN EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011); German and English version prEN ISO 29463-2:2018
DIN EN 12341:2023-10 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German version EN 12341:2023
DIN EN 15238:2023-01 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm; German version EN 15238:2022
DIN 51813:1989 Determination of solid matter content of lubricating greases (particle sizes above 25 m)
DIN ISO 10473:2002-08 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method (ISO 10473:2000)
DIN EN 14666:2005 Surface active agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method; German version EN 14666:2005
DIN EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
DIN EN 933-7:1998 Tests for geometrical properties of aggregates - Part 7: Determination of shell content; percentage of shells in coarse aggregates; German version EN 933-7:1998
DIN EN ISO 21484:2019-11 Nuclear Energy - Fuel technology - Determination of the O/M ratio in MOX pellets by the gravimetric method (ISO 21484:2017); German version EN ISO 21484:2019
DIN EN 12341:2022 Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter; German and English version prEN 12341:2022
DIN EN 933-4:2008 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index; English version of DIN EN 933-4:2008-06
DIN EN 933-3:2012-04 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index; German version EN 933-3:2012
DIN EN 933-4:2015-01 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index; German version EN 933-4:2008
DIN ISO 4576:2001 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Measuring particle size

GB/T 42660-2023 Calibration of aerosol particle number concentration condensation nuclei particle counters
GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
GB/T 26570.1-2011 Determination of particle in gases.Light-scattering method.Part 1:Determination of particle in pipeline gases
GB/T 27893-2011 Natural gas.Determination of particles content.Gravimetric method
GB/T 14853.2-2016 Pelletized carbon black for rubber.Part 2:Determination of fines content and pellet attrition
GB/T 13277.4-2015 Compressed air.Part 4:Test methods for solid particle content
GB/T 15432-1995 Ambient Air--Determination of total suspended particulates--Gravimetric method
GB/T 11986-1989 Surface active agents--Powders and granules--Mesurement of the angle of repose
GB/T 7702.5-1997 Standard test method for granular activated carbon from coal--Determination of water absorption
GB/T 7702.14-2008 Test method for granular activated carbon from coal.Determination of sulphur capacity
GB/T 13277.8-2023 Compressed air part 8: Methods of measurement of mass concentration of solid particles
GB/T 42208-2022 Nanotechnologies—Measurement of nanoparticle size in multiphase system—Image method of transmission electron microsopy
GB/T 43196-2023 Nanotechnology Scanning Electron Microscopy to Measure Nanoparticle Size and Shape Distribution
GB/T 31057.1-2014 Granular materials.The physical properties.Part 1:Determination of apparent density
GB/T 7702.14-1997 Standard test method for granular activated carbon from coal--Determination of saturated sulphur capacity
GB/T 7702.22-1997 Standard test method for granular activated carbon from coal--Determination of breakthrough sulphur capacity
GB/T 42732-2023 Size Distribution and Concentration Measurement of Inorganic Nanoparticles in Aqueous Phases in Nanotechnology by Single Particle Inductively Coupled Plasma Mass Spectrometry
GB/T 29023.2-2016 Measurement and characterization of particles by acoustic method.Part 2: Guidelines for linear theory
GB/T 42469-2023 Nanotechnology Antimicrobial Silver Nanoparticles Properties and Measurement Methods General Rules
GB/T 21452-2008 Petroleum products.Determination of particulate content of middle distillate fuels.Laboratory filtration method
GB/T 8190.2-2011 Reciprocating internal combustion engines.Exhaust emission measurement.Part 2: Measurement of gaseous and particulate exhaust emissions at site
GB/T 8190.2-1999 Reciprocating internal combustion engines Exhaust emission measurement--Part 2: Measurement of gaseous and particulate exhaust emissions at site

Henan Provincial Standard of the People's Republic of China, Measuring particle size

DB41/T 1431-2017 Particle Meter

Association of German Mechanical Engineers, Measuring particle size

VDI 3867 Blatt 1-2009 Measurement of particulate matter in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Fundamentals
VDI 2463 Blatt 4-1976 Particulate matter measurement; Measurement of particulate matter in ambient air; LIB-filter method
VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
VDI 3867 Blatt 6-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI)
VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 3489 Blatt 3-1997 Particulate matter measurement - Methods of characterizing and monitoring test aerosols - Optical particle counter
VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
VDI 3491 Blatt 1-1980 Particulate matter measurement; characteristics of suspended particulate matter in gases; terms and definitions
VDI 2066 Blatt 5-1994 Particulate matter measurement - Dust measurement in flowing gases; particle size selective measurement by impaction method - Cascade impactor
VDI 3491 Blatt 7-1987 Particulate matter measurement; generation of test aerosols; Rapaport-Weinstock generator
VDI 4300 Blatt 11-2013 Measurement of indoor air pollution - Measurement strategies for determination of airborne particles in indoor environment - PM2,5-fraction
VDI 3491 Blatt 6-1980 Particulate matter measurement; generation of test aerosols; platinum oxide generator
VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)
VDI 2066 Blatt 1-2006 Particulate matter measurement - Dust measurement in flowing gases - Gravimetric determination of dust load
VDI 3491 Blatt 12-1990 Particulate matter measurement; generation of test aerosols using centrifugal atomizers
VDI 3491 Blatt 2-2017 Measurement of particles - Methods for generating test aerosols - Dispersing liquids
VDI 2463 Blatt 7-2014 Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
VDI 3491 Blatt 13-1996 Particulate matter measurement - Generation of test aerosols using a vibrating-orifice generator
VDI 3491 Blatt 11-1990 Particulate matter measurement; generation of test aerosols using ultrasonic atomizers
VDI 3491 Blatt 4-1980 Particulate matter measurement; generation of test aerosols; Sinclair-La Mer-generator
VDI 3491 Blatt 2-1980 Particulate matter measurement; production methods of test aerosols; foundations and synoptics
VDI 3491 Blatt 9-1989 Particulate matter measurement; generation of test aerosols with a rotating brush generator
VDI 3491 Blatt 3-1980 Particulate matter measurement; generation of latex aerosols using nozzle atomizers
VDI 3492-2004 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
VDI 3492-2013 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
VDI 2463 Blatt 11-1996 Particulate matter measurement - Measurement of mass concentration in ambient air - Filter method; Digitel DHA-80 filter changer
VDI 3491 Blatt 15-1996 Particulate matter measurement - Generation of test aerosols - Dilution systems with continuous volumetric flow
VDI 2066 Blatt 10-2004 Particulate matter measurement - Dust measurement in flowing gases - Measurement of PM10 and PM2,5 emissions at stationary sources by impaction method
VDI 2267 Blatt 2-1983 Determination of suspended particulates in ambient air; measurement of lead by X-ray fluorescence
VDI 2463 Blatt 7-1982 Particulate matter measurement; measurement of mass concentration in ambient air; filter method; small filter device GS 050
VDI 2463 Blatt 8-1982 Particulate matter measurement; measurement of mass concentration in ambient air; standard method for the comparsion of nonfractionating methods
VDI 3491 Blatt 16-1996 Particulate matter measurement - Generation of carbon aerosols using a spark aerosol generator
VDI 2066 Blatt 8-1995 Measurement of particles - Dust measurement in flowing gases - Measurement of smoke number in furnaces designed for EL-type fuel oil
VDI 3489 Blatt 8-1996 Particulate matter measurement - Methods for characterizing and monitoring test aerosols - Time-of-flight spectrometer
VDI 3491 Blatt 5-1980 Particulate matter measurement; generation of test aerosols by nebulization of dye-solutions with nozzle atomizers
VDI 3491 Blatt 8-1989 Particulate matter measurement; generation of test aerosols from powders using a belt feed unit

SAE - SAE International, Measuring particle size

SAE ARP598A-1969 The Determination of Particulate Contamination in Liquids by the Particle Count Method
SAE ARP598B-1986 Determination of Particulate Contamination in Liquids by the Particle Count Method
SAE AIR5892A-2004 Nonvolatile Exhaust Particle Measurement Techniques
SAE AIR5892-2004 Nonvolatile Exhaust Particle Measurement Techniques
SAE ARP743B-2001 Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces by the Manual Particle Count Method
SAE ARP743C-2010 Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces by the Manual Particle Count Method
SAE AIR6037-2010 Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development
SAE AIR6037A-2018 Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development

Society of Automotive Engineers (SAE), Measuring particle size

SAE ARP598B-1991 THE DETERMINATION OF PARTICULATE CONTAMINATION IN LIQUIDS BY THE PARTICLE COUNT METHOD
SAE ARP598-1991 PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION OF HYDRAULIC FLUIDS BY THE PARTICLE COUNT METHOD
SAE AIR5892B-2012 Nonvolatile Exhaust Particle Measurement Techniques

Korean Agency for Technology and Standards (KATS), Measuring particle size

KS B 6331-1992(2022) The determination of particulate contamination in hydraulic fluids by the particle count method
KS M ISO 2190:2020 Granulated cork — Determination of moisture content
KS M ISO 18846:2021 Solid biofuels — Determination of fines content in samples of pellets
KS B ISO 29463-2:2021 High-efficiency filters and filter media for removing particles in air — Part 2: Aerosol production, measuring equipment and particle-counting statistics
KS M ISO 11234-2007(2022) Rubber compounding ingredients－Carbon black(pelletized)－Determination of dust content
KS D 2716-2008(2018) Measurement of nanoparticle diameter－Transmission electron microscope
KS I ISO 9096:2009 Stationary source emissions－Manual determination of mass concentration of particulate matter
KS H ISO 5739:2021 Caseins and caseinates — Determination of scorched particles content
KS I ISO 4405-2005(2020) Hydraulic fluid power－Fluid contamination－Determination of particulate contamination by the gravimetric method
KS I ISO 9096:2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS I ISO 10473:2010 Ambient air－Measurement of the mass of particulate matter on a filter medium－Beta-ray absorption method
KS I ISO 10473:2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
KS M ISO 10376:2022 Pulps — Determination of mass fraction of fines
KS I ISO 4405:2005 Hydraulic fluid power－Fluid contamination－Determination of particulate contamination by the gravimetric method
KS I ISO 4407:2017 Hydraulic fluid power－Fluid contamination－Determination of particulate contamination by the counting method using an optical microscope
KS I ISO 4407-2017(2022) Hydraulic fluid power－Fluid contamination－Determination of particulate contamination by the counting method using an optical microscope
KS R ISO 13353:2009 Diesel fuel and petrol filters for internal combustion engines－Initial efficiency by particle counting
KS R ISO 13353:2004 Diesel fuel and petrol filters for internal combustion engines－Initial efficiency by particle counting

AENOR, Measuring particle size

UNE-EN ISO 18846:2017 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
UNE 53936:2015 EX Materials produced from end of life tyres. Rubber granulates. Determination of textile fiber content by visual rate
UNE 56917:1988 CORK. GRANULATED CORK. DETERMINATION OF MOISTURE CONTENT
UNE-EN 481:1995 WORKPLACE ATMOSPHERES. SIZE FRACTION DEFINITIONS FOR MEASUREMENT OF AIRBORNE PARTICLES.
UNE 55547:1981 SURFACE ACTIVE AGENTS. POWDERS AND GRANULES. MEASUREMENT OF THE ANGLE OF REPOSE
UNE-ISO 9096:2005 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE-EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
UNE-ISO 10473:2005 Ambient air -- Measurement of the mass of particulate matter on a filter medium -- Beta-ray absorption method
UNE-EN 933-3:2012 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
UNE-EN 933-4:2008 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
UNE-EN 14902:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter

British Standards Institution (BSI), Measuring particle size

23/30436644 DC BS ISO 19430. Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
BS ISO 27891:2015 Aerosol particle number concentration. Calibration of condensation particle counters
BS EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles
BS PD CEN/TS 16976:2016 Ambient air. Determination of the particle number concentration of atmospheric aerosol
BS ISO 8573-4:2019 Compressed air. Contaminant measurement - Particle content
BS ISO 16232-9:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle sizing and counting by automatic light extinction particle counter
BS EN ISO 520:2010 Cereals and pulses. Determination of the mass of 1000 grains
BS EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air. Aerosol production, measuring equipment and particle-counting statistics
BS EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
BS EN 14907:2005(2010) Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
BS ISO 13067:2011 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
BS 812-105.1:1989 Testing aggregates. Methods for determination of particle shape. Flakiness index
BS 812-105.1:1990 Testing aggregates. Methods for determination of particle shape. Flakiness index
BS ISO 16000-34:2018 Indoor air. Strategies for the measurement of airborne particles
BS EN ISO 11508:2017 Tracked Changes. Soil quality. Determination of particle density
BS ISO 11500:2008 Hydraulic fluid power - Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
BS EN ISO 18846:2016 Solid biofuels. Determination of fines content in quantities of pellets
BS EN ISO 5370:2023 Solid biofuels. Determination of fines content in pellets
BS EN 1822-2:2009 High efficiency air filters (EPA, HEPA and ULPA) - Aerosol production, measuring equipment, particle counting statistics
BS EN 1822-2:1998 High efficiency air filters (HEPA and ULPA) - Aerosol production, measuring equipment, particle counting statistics
BS EN 1822-2:2010 High efficiency air filters (EPA, HEPA and ULPA) - Aerosol production, measuring equipment, particle counting statistics
BS PD CEN ISO/TS 17200:2015 Nanotechnology. Nanoparticles in powder form. Characteristics and measurements
BS ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
BS ISO 9096:2017 Stationary source emissions. Manual determination of mass concentration of particulate matter
PD ISO/TR 4808:2021 Hydraulic fluid power. Interpolation method for particle count and filter test data
BS EN 16450:2017 Tracked Changes. Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
BS EN ISO 17200:2020 Nanotechnology. Nanoparticles in powder form. Characteristics and measurements
22/30429423 DC BS ISO 11500. Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
BS ISO 8178-1:2017 Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement systems of gaseous and particulate emissions
BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS EN 933-3:2012 Tests for geometrical properties of aggregates. Determination of particle shape. Flakiness index
BS ISO 11500:2022 Tracked Changes. Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
BS EN 15238:2006 Soil improvers and growing media — Determination of quantity for materials with particle size greater than 60 mm
BS EN 15238:2007 Soil improvers and growing media. Determination of quantity for materials with particle size greater than 60 mm
BS ISO 20998-3:2017 Measurement and characterization of particles by acoustic methods. Guidelines for non-linear theory
BS EN ISO 21484:2019 Nuclear Energy. Fuel technology. Determination of the O/M ratio in MOX pellets by the gravimetric method
BS EN 12341:1999 Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods
BS ISO 16000-42:2023 Indoor air - Measurement of the particle number concentration by condensation particle counters
BS ISO 8573-8:2004 Compressed air - Test methods for solid particle content by mass concentration
BS ISO 4405:2022 Hydraulic fluid power. Fluid contamination. Determination of particulate contamination by the gravimetric method
22/30427608 DC BS EN ISO 5370. Solid biofuels. Determination of fines content in pellets
BS ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
BS EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Test method of determination of inward leakage of aerosols of fine particles into suits
BS ISO 16232-6:2007 Road vehicles - Cleanliness of components of fluid circuits - Particle mass determination by gravimetric analysis
BS 1743-19:1985 Methods for analysis of dried milk and dried milk products - Determination of scorched particles content
PD ISO/TS 20660:2019 Nanotechnologies. Antibacterial silver nanoparticles. Specification of characteristics and measurement methods
BS ISO 20998-2:2022 Tracked Changes. Measurement and characterization of particles by acoustic methods.. Linear theory
BS ISO 8178-1:2020 Reciprocating internal combustion engines. Exhaust emission measurement - Test-bed measurement systems of gaseous and particulate emissions
BS EN 17289-3:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. Sedimentation method
BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS ISO 19007:2018 Nanotechnologies. In vitro MTS assay for measuring the cytotoxic effect of nanoparticles
22/30443631 DC BS EN 12341. Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

RU-GOST R, Measuring particle size

GOST 34236-2017 Light and middle distillate fuels. Determination of sizing and counting particles by automatic particle counter
GOST R 50183-1992 Plastics. Polyvinylchloride resines. Determination of number of impurites and foreign particles
GOST R 51465-1999 Caseins and caseinates. Determination of scorched particles content
GOST 32517.1-2013 Iron ores, concentrates, agglomerates and pellets. Methods for the determination of total iron
GOST 29234.3-1991 Moulding sands. Methods for determination of medium size of seed and coefficient of homogeneity
GOST R ISO 11412-2014 Carbonaceous materials for the production of aluminium. Calcined coke. Determination of water content
GOST R ISO 9096-2006 Stationary source emissions. Manual determination of mass concentration of particulate matter
GOST 32279-2013 Iron ores, concentrates, agglomerates and pellets. Method for determination of hygroscopic water content
GOST 32518.1-2013 Iron ores, concentrates, agglomerates and pellets. Determination of silica gravimetric method
GOST ISO 8178-2-2013 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions

Group Standards of the People's Republic of China, Measuring particle size

T/WJZZ 009-2021 Whole measurement calibration method of particle number concentration measuring instrument
T/SSM 5-2022 Calibration specifications for particle number concentration measuring instruments used in motor vehicle emissions
T/CICEIA /CAMS7-2020 Measurement methods of fine particles for mobile pollution sources
T/CSP 8-2021 Particle technology—Microbubble size analysis —Submerged dynamic image analysis method
T/CNIA 0015-2019 Determination of Silica Dust Content in Granular Silicon Production Tail Gas
T/SDAS 447-2022 Detection method of main parameters of mask particle filtration efficiency detector
T/CAQI 152-2020 Technical specification for on-line particle count monitor for urban water supply system
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/CEC 217-2019 Method for determination of particle content in sulfur hexafluoride gas - Light scattering method
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
T/XZFW 006-2023 Digital processor for monitoring results of low-concentration particulate matter in exhaust gas from fixed pollution sources
T/XZFW 010-2023 Stationary source emission —data processor for monitoring of particulate matter at low concentration

ES-UNE, Measuring particle size

ISO/TS 24672:2023 Nanotechnologies — Guidance on the measurement of nanoparticle number concentration
UNE-EN ISO 29463-2:2019 High-efficiency filters and filter media for removing particles in air - Part 2: Aerosol production, measuring equipment and particle-counting statistics (ISO 29463-2:2011)
UNE-CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol (Endorsed by Asociación Española de Normalización in January of 2021.)
UNE-ISO 9096:2005/COR 1:2009 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE-EN ISO 17200:2020 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020) (Endorsed by Asociación Española de Normalización in November of 2020.)
UNE-EN ISO 5370:2023 Solid biofuels - Determination of fines content in pellets (ISO 5370:2023)
UNE 146406:2018 Determination of content, maximum size and thick aggregate granulometric modulus in fresh concrete.

American Society for Testing and Materials (ASTM), Measuring particle size

ASTM D7486-22 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM D7619-12 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D7619-12b Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
ASTM F24-09(2015) Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM F24-20 Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM F51-00 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM E1037-15 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM D6786-07 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM F51/F51M-00(2014)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM F51/F51M-00(2007)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
ASTM D7619-22 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM C1603-05a Standard Test Method for Measurement of Solids in Water
ASTM C1603-04e1 Standard Test Method for Measurement of Solids in Water
ASTM C1603-04 Standard Test Method for Measurement of Solids in Water
ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM E3269-21 Standard Test Method for Determination of the Mass Fraction of Particle-Bound Gold in Colloidal Gold Suspensions
ASTM D6786-02 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D7619-10 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D7486-08 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM D7486-08(2013)e1 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM D7596-23 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM D7596-14 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM E1358-97(2006) Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
ASTM E1358-97 Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
ASTM D5861-95(2002) Standard Guide for Significance of Particle Size Measurements of Coating Powders
ASTM D5861-07(2013) Standard Guide for Significance of Particle Size Measurements of Coating Powders
ASTM E1534-93(2013) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
ASTM E1534-93(2019) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
ASTM F312-97 Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
ASTM F312-97(2003) Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
ASTM D8108-21 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D8108-20 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM C142/C142M-10 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
ASTM D1739-98(2017) Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
ASTM E1534-93(1998) Standard Test Method for Determination of ASH Content of Particulate Wood Fuels
ASTM E2515-11 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
ASTM E3238-20 Standard Test Method for Quantitative Measurement of the Chemoattractant Capacity of a Nanoparticulate Material in vitro
ASTM D8108-21e1 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D7619-12a Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter

Association Francaise de Normalisation, Measuring particle size

NF EN ISO 18846:2016 Biocombustibles solides - Détermination de la teneur en fines dans les quantités de granulés
NF X31-554:1998 Soil quality. Determination of particle density.
NF X31-554*NF EN ISO 11508:2017 Soil quality - Determination of particle density
NF EN ISO 11508:2017 Qualité du sol - Détermination de la masse volumique des particules
NF X34-126*NF EN ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
NF X31-107:2003 Qualité du sol - Détermination de la distribution granulométrique des particules du sol - Méthode à la pipette
NF V03-769:2011 Cereals and pulses - Determination of the mass of 1000 grains.
NF V03-702*NF EN ISO 520:2011 Cereals and pulses - Determination of the mass of 1000 grains
NF EN 481:1993 Atmosphères des lieux de travail - Définition des fractions de taille pour le mesurage des particules en suspension dans l'air
NF R19-501-9:2011 Road vehicles - Cleanliness of components of fluid circuits - Part 9 : particle sizing and counting by automatic light extinction particle counter.
NF X43-276*NF EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles.
NF ISO 11500:2023 Transmissions hydrauliques - Détermination du niveau de pollution particulaire d'un échantillon liquide par comptage automatique des particules par absorption de lumière
NF EN ISO 5370:2023 Biocombustibles solides - Détermination de la teneur en fines des granulés
NF EN ISO 29463-2:2018 Filtres à haut rendement et filtres pour l'élimination des particules dans l'air - Partie 2 : production d'aérosol, équipement de mesure et statistique de comptage de particules
NF P18-622-3*NF EN 933-3:2012 Tests for geometrical properties of aggregates - Part 3 : determination of particle shape - Flakiness index
NF X44-014-2*NF EN ISO 29463-2:2018 High-efficiency filters and filter media for removing particles in air - Part 2 : aerosol production, measuring equipment and particle-counting statistics
NF T73-008:1978 Surface active agents. Powders and granules.measurement of the angle of repose.
NF ISO 16000-34:2019 Air intérieur - Partie 34 : stratégie pour la mesure des particules en suspension
NF ISO 1435:2005 Ingrédients de mélange du caoutchouc - Noir de carbone (en granules) - Détermination de la teneur en matières fines
NF EN 16602-70-50:2016 Assurance produit des projets spatiaux - Surveillance de la contamination aux particules des systèmes orbitaux et des salles blanches
NF ISO 4387:2020 Cigarettes - Détermination de la teneur en matière particulaire totale et en matière particulaire anhydre et exempte de nicotine au moyen d'une machine à fumer analytique de routine
NF E48-658*NF ISO 11500:2008 Hydraulic fluid power - Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle.
NF ISO 8573-4:2019 Air comprimé - Mesurage des polluants - Partie 4 : teneur en particules
NF X43-021*NF EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10;PM2,5)
NF ISO 7440-2:1993 Véhicules routiers - Essai des équipements d'injection de combustible - Partie 2 : mesurage du débit des pastilles à trou.
NF T45-152:1991 Rubber compounding ingredients. Carbon black (pelletized). Determination of fines content.
NF EN ISO 17200:2020 Nanotechnologies - Nanoparticules sous forme de poudre - Caractéristiques et mesurages
NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
NF X43-404-34*NF ISO 16000-34:2019 Indoor air - Part 34 : strategies for the measurement of airborne particles
NF ISO 4405:2022 Transmissions hydrauliques - Pollution des fluides - Détermination de la pollution particulaire par la méthode gravimétrique
NF ISO 10473:2000 Air ambiant - Mesurage de la masse des matières particulaires sur un milieu filtrant - Méthode par absorption de rayons bêta
NF X43-261:1988 Qualité de l'air - Air des lieux de travail - Prélèvement à poste fixe et mesurage de la pollution particulaire totale.
NF E48-695:2003 Hydraulic fluid power - Parts and components - Expression of particulate pollution measurement results.
NF E48-652:1990 Hydraulic fluid power. Fluids. Determination of overall particulate contamination by the gravimetric method.
NF ISO 2067:2020 Granulés de liège, liège concassé et liège trituré - Échantillonnage pour la détermination de la teneur en humidité
NF T51-046:1997 Plastics - Polyvinyl chloride resins. Determination of number of impurities and foreign particles.
NF T45-154:1989 Raw materials for the rubber industry. Determination of the gross cohesion index for pelletized carbon black.
NF P18-622-3:1997 Tests for geometrical properties of aggregates. Part 3 : determination of particle shape. Flakiness index.
NF X43-040*NF ISO 10473:2000 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method
NF U44-313*NF EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm.
NF EN 16450:2017 Air ambiant - Systèmes automatisés de mesurage de la concentration de matière particulaire (PM10;PM2,5)
NF ISO 8178-2:2022 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 2 : mesurage des émissions de gaz et de particules sur site
NF ISO 9278:2009 Énergie nucléaire - Pastilles de dioxyde d'uranium - Détermination de la masse volumique et de la fraction volumique de pores ouverts et fermés
NF X43-026:1990 Air quality. Ambient air. Determination of lead in airborne particulate. Atomic absorption spectrometry.
NF ISO 8573-8:2004 Air comprimé - Partie 8 : méthodes d'essai pour la détermination de la teneur en particules solides par concentration massique

PL-PKN, Measuring particle size

PN P50172-1989 Paper products Determination number conducting particles at condenser tissue paper
PN P22146-1992 Leathers. Determination of resistance to grain cracking and of crack index
PN C04840-1989 Surface active agents Powders and granules Measurement of the angle of repose
PN P50111-1988 Paper and paperboard etermination ot" the number t' contamination by iron and copper particles
PN R74017-1968 Cereals and pulses Determination of ?he mass of 1000 grains
PN B06714-43-1987 Mineral aggregates Testings Determination of compressive strength of particles contents
PN-EN ISO 17200-2021-03 E Nanotechnology -- Nanoparticles in powder form -- Characteristics and measurements (ISO 17200:2020)

Occupational Health Standard of the People's Republic of China, Measuring particle size

GBZ/T 192.6-2018 Determination of dust in the air of workplaces - Part 6: Ultrafine particles and total fine particle concentration

Japanese Industrial Standards Committee (JISC), Measuring particle size

JIS B 9930:1993 Hydraulic fluids -- Determination of particulate contamination by the particle count method
JIS K 6219-1:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 1: Determination of fines content
JIS B 9927-2:2022 High-efficiency filters (EPA, HEPA and ULPA) and filter media for removing particles in air -- Part 2: Aerosol production, measuring equipment and particle-counting statistics
JIS K 6737:1999 Plastics -- Polyvinyl chloride resins -- Determination of number of impurities and foreign particles
JIS A 1126:2007 Method of test for content of soft particles in coarse aggregate by scratching
JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements
JIS B 9934:2000 Hydraulic fluid power -- Determination of particulate contamination by automatic counting using the light extinction principle
JIS A 1126:2001 Method of test for content of soft particles in coarse aggregate by scratching

BR-ABNT, Measuring particle size

ABNT MB-28-1969

PT-IPQ, Measuring particle size

NP 605-1986
NP 606-1986
NP 164-1958
NP 1294-1976
NP 4259-1999 Solid fuels. Cokes(Particle size greather than 20mm). Determination of mechanical strength

KR-KS, Measuring particle size

KS M ISO 2190-2020 Granulated cork — Determination of moisture content
KS M ISO 18846-2021 Solid biofuels — Determination of fines content in samples of pellets
KS B ISO 29463-2-2021 High-efficiency filters and filter media for removing particles in air — Part 2: Aerosol production, measuring equipment and particle-counting statistics
KS D 2716-2023 Measurement of nanoparticle diameter — Transmission electron microscope
KS H ISO 5739-2021 Caseins and caseinates — Determination of scorched particles content
KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS I ISO 10473-2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
KS M ISO 10376-2022 Pulps — Determination of mass fraction of fines
KS R 1190-2023 Test method for automotive brake wear particle measurement using brake dynamometer
KS I ISO 4407-2017 Hydraulic fluid power－Fluid contamination－Determination of particulate contamination by the counting method using an optical microscope
KS R ISO 13353-2004 Diesel fuel and petrol filters for internal combustion engines－Initial efficiency by particle counting
KS I ISO 12141-2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method

GOSTR, Measuring particle size

GOST 33196-2014 Distillate fuels. Determination of free water and particulate contamination by visual inspection method
GOST R ISO 16000-34-2020 Indoor air. Part 34. Strategies for the measurement of airborne particles

HU-MSZT, Measuring particle size

VN-TCVN, Measuring particle size

TCVN 4846-1989 Determination of moisture content (on milled grains and on whole grains)
TCVN 5977-2009 Stationary source emissions.Manual determination of mass concentration of particulate matter
TCVN 6852-2-2010 Reciprocating internal combustion engines.Exhaust emission measurement.Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions

未注明发布机构, Measuring particle size

DIN EN 1822-2:1998 High efficiency particulate air filters (HEPA and ULPA) — Part 2: Aerosol production, measuring equipment, particle counting statistics
SAE AIR5892B-2004 Nonvolatile Exhaust Particle Measurement Techniques
BS EN 481:1993(1999)*BS 6069-3.5:1993 Workplace atmospheres — Size fraction definitions for measurement of airborne particles
DIN EN ISO 21363:2022 Nanotechnologies – measurements of particle size and particle shape distributions using transmission electron microscopy
BS EN 60970:2007(2008) Insulating liquids — Methods for counting and sizing particles
BS 812-105.1:1989(2000) Testing aggregates — Part 105 : Methods for determination of particle shape — Section 105.1 Flakiness index
BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

工业和信息化部, Measuring particle size

SH/T 1541.1-2019 Appearance test methods for plastic particles Part 1: Visual inspection method

Danish Standards Foundation, Measuring particle size

DS/ISO 11508:1999 Soil quality - Determination of particle density
DS/EN ISO 1265:2007 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles
DS/EN 14907:2005 Ambient air quality - Reference gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
DS/ISO/TS 17200:2013 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements
DS/CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
DS/EN 933-3:2012 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
DS/EN 933-4:2008 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
DS/EN 14902/AC:2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
DS/EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
DS/EN 12341:1999 Air quality - Determination of the PM 10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods

API - American Petroleum Institute, Measuring particle size

API PUBL 4772-2008 Measuring Particulate Emissions from Combustion Sources
API TR 13TR3-2018 Size Measurement of Dry@ Granular Drilling Fluid Particulates (FIRST EDITION)

European Committee for Standardization (CEN), Measuring particle size

EN ISO 5370:2023 Solid biofuels - Determination of fines content in pellets (ISO 5370:2023)
EN ISO 18846:2016 Solid biofuels - Determination of fines content in quantities of pellets
EN ISO 520:2010 Cereals and pulses - Determination of the mass of 1000 grains (ISO 520:2010)
EN 14907:2005 Ambient air quality Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
EN ISO 2010:2011 Slotted raised countersunk head screws - Product grade A
PD CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
EN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements
EN ISO 17200:2020 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO 17200:2020)
FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN 1822-2:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics
EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN 933-4:2008 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
EN 12341:1998 Air Quality - Determination of the PM10 Fraction of Suspended Particulate Matter - Reference Method and Field Test Procedure to Demonstrate Reference Equivalence of Measurement Methods

International Organization for Standardization (ISO), Measuring particle size

ISO 5370:2023 Solid biofuels — Determination of fines content in pellets
ISO 520:2010 Cereals and pulses - Determination of the mass of 1000 grains
ISO 16232-9:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter
ISO 11500:2022 Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
ISO 17200:2020 Nanotechnology — Nanoparticles in powder form — Characteristics and measurements
ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter
ISO 9276-6:2008 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology
ISO 8573-4:2001 Compressed air - Part 4: Test methods for solid particle content
ISO 6188:1986 Plastics; Poly(alkylene terephthalate) granules; Determination of water content
ISO 1435:1988 Rubber compounding ingredients; carbon black (pelletized); determination of fines content
ISO 16000-34:2018 Indoor air - Part 34: Strategies for the measurement of airborne particles
ISO 8573-4:2019 Compressed air — Contaminant measurement — Part 4: Particle content
ISO 10473:2000 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method
ISO 6188:1980 Plastics — Poly(ethylene terephthalate) granules — Determination of water content
ISO/CD 4407 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope
ISO 4405:1991 Hydraulic fluid power; fluid contamination; determination of particulate contamination by the gravimentric method
ISO 5739:2003 | IDF 107:2003 Caseins and caseinates — Determination of contents of scorched particles and of extraneous matter
ISO 8178-2:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site
ISO/FDIS 16000-42 Indoor air — Part 42: Measurement of the particle number concentration by condensation particle counters
ISO 16000-42:2023 Indoor air — Part 42: Measurement of the particle number concentration by condensation particle counters
ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
ISO 8178-1:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions
ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method

Professional Standard - Petroleum, Measuring particle size

SY/T 5408-1991 Determination of the content of sticky particles in sedimentary rocks

国家能源局, Measuring particle size

SY/T 5408-2018 Determination of clay particle content in sedimentary rocks

Professional Standard - Aerospace, Measuring particle size

QJ 2724.5-1995 Automatic particle counter counting method for determination of solid particle pollution in working fluid for aerospace hydraulic pollution control
QJ 2724.4-1995 Microscopic Particle Counting Method for Determination of Solid Particle Contamination of Working Fluids in Aerospace Hydraulic Pollution Control

YU-JUS, Measuring particle size

JUS H.B8.817-1992 Straight ammonium nitrate fertilizers of high nitrogen content - Determination of the particle size (granulometry)

Lithuanian Standards Office , Measuring particle size

LST EN 14907-2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
LST EN 481-2001 Workplace atmospheres - Size fraction definitions for measurement of airborne particles
LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
LST ISO 10473:2001 Ambient air. Measurement of the mass of particulate matter on a filter medium. Beta-ray absorption method
LST EN 933-4-2008 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
LST EN 933-3-2012 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
LST EN 14902-2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
LST EN 14902-2005/AC-2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
LST EN 12341-2000 Air quality - Determination of the PM 10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods

CZ-CSN, Measuring particle size

CSN 66 8102 Cast.3-1997
CSN 65 4823-1982 Minerál fertilizers Method for the determination of granulometric composilion
CSN 83 4611-1982 Measurement of solid particulate emissions from stationary sources
CSN 64 0532-1993 Plastics. Test method for yellowness index of polypropylene natural granulate
CSN 79 3821-1978 Testing of leathers. Flexure resistance o? the leather grain and index of cracking

Military Standard of the People's Republic of China-General Armament Department, Measuring particle size

GJB 380.4-1987 Aircraft hydraulic system contamination test uses automatic particle counter to determine oil solid particle contamination degree
GJB 380.4A-2015 Aviation Service Fluid Contamination Testing Part 4: Determination of Solid Particle Contamination by Automatic Particle Counting Method
GJB 380.3-1987 Aircraft Hydraulic System Contamination Testing Automatic Particle Counter Calibration
GJB 380.3A-2015 Aviation Service Fluid Contamination Testing Part 3: Automatic Particle Counter Calibration

国家市场监督管理总局、中国国家标准化管理委员会, Measuring particle size

GB/T 31057.3-2018 Granular materials—Physical properties—Part 3: Fluidity index
GB/T 37163-2018 Hydraulic fluid power—Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method
GB/T 37167-2018 Particle—Separation and measurement of trace magnetic materials(elements) in inorganic powder
GB/T 31057.2-2018 Granular materials—Physical properties—Part 2: Determination of tap density
GB/T 38340-2019 Small craft—Reciprocating internal combustion engines exhaust emission measurement—Test-bed measurement of gaseous and particulate exhaust emissions
GB/T 36677-2018 Determination of fine particle emission rates from copying (including multi-function) devices

Professional Standard - Aviation, Measuring particle size

HB 8581-2020 Hydraulic fluid power- Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light- extinction principle
HB 5931.4-1986 Determination of Solid Particle Contamination Degree of Working Fluid Using Automatic Particle Counter for Contamination Test of Aircraft Hydraulic System
HB 5931.3-1986 Aircraft Hydraulic System Contamination Testing Automatic Particle Counter Calibration

CO-ICONTEC, Measuring particle size

ICONTEC 1522-1980

Professional Standard - Machinery, Measuring particle size

JB/T 9395.5-1999 Measuring method for scatter graininess of optical crystal
JB/T 9495.5-1999 Measuring method for scatter graininess of optical crystal

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Measuring particle size

GJB 380.4A-2004 Contamination test method of operating liquid for aviation Part 4:Determination of solid particle contamination level by automatic particle counting method
GJB 380.3A-2004 Contamination test method of operating fluid for aviation Part 3:Calibration of automatic particle counters

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Measuring particle size

GB/T 29024.4-2017 Determination of particle size distribution－Single particle light interaction methods－Part 4: Light scattering airborne particle counter for clean spaces
GB/T 33714-2017 Nanotechnology—Test method for size of nanoparticles—Atomic force microscopy

CU-NC, Measuring particle size

NC 43-10-1968 Particle boards and fibre boards Determination of moisture content
NC 43-11-1968 Particle boards and fibre boards Determination of bending strength

NL-NEN, Measuring particle size

NEN 5945-1990 Aggregates for concrete - Determination of lightweight partiele content
NEN 2785-1990 Air quality - Ambient air - Collection of particulate matter for the determination of the content of metals - HVS-method

IT-UNI, Measuring particle size

UNI 7549-P5-1976
UNI 4871-1961
UNI EN ISO 17200:2021 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements
UNI 4870-1961

Professional Standard - Electricity, Measuring particle size

DL/T 432-2007 Determination of particulate contamination in oil
DL/T 1915-2018 Gravimetric method for testing technical specifications of low-concentration particulate matter in thermal power plants
DL/T 1520-2016 Specifications for fine particles(PM2.5)monitoring in the thermal power plants-gravimetric method

Guangdong Provincial Standard of the People's Republic of China, Measuring particle size

DB44/T 924-2011 Test Method for Free Water and Particulate Contaminants in Distillate Fuels Visual Method
DB44/T 1654-2015 Nanotechnology - Characterization and Measurement of Powdered Nanoparticles

RO-ASRO, Measuring particle size

STAS 12332-1985 METHOD FOR DETERMINATION OF THEAMOTNT OF SOLID PARTICLES IN WELDING FUMES GENERATED BY COVERED ELECTRODES
STAS 86/2-1987 WOOD Determination of modulus o( elasticity in compression parallel to grains
STAS 7621/2-1985 NORMAL ELECTROCORUNDUM Determination of mineralogic composition and aggregate granules content

IN-BIS, Measuring particle size

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Measuring particle size

ASHRAE 4328-2000 Method for Measuring Ice Slurry Particle Agglormeration in Storage Tanks

Indonesia Standards, Measuring particle size

SNI 13-4716-1998 Determination of particle size distribution by weight of sedimentation in water measurement methods

Canadian Standards Association (CSA), Measuring particle size

CSA Z223.1-M1977-1977 Method for the Determination of Particulate Mass Flows in Enclosed Gas Streams R(1999)

Professional Standard - Ocean, Measuring particle size

HY/T 133-2010 Determination of spectral absorption coefficient of particles and dissolved material for seawater-Spectrophotometry

TH-TISI, Measuring particle size

TIS 1759-1999 Surface active agents.powders and granules.measurement of the angle of repose

PH-BPS, Measuring particle size

PNS ISO 17200:2021 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements

BE-NBN, Measuring particle size

NBN T 96-101-1978 Gravimetrie determination of the total suspended particulate content in work place atmospheres

VE-FONDONORMA, Measuring particle size

NORVEN 76-18-1965

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Measuring particle size

IPC TM-650 2.2.14.1-1995 Solder Powder Particle Size Distribution - Measuring Microscope Method

Professional Standard - Environmental Protection, Measuring particle size

HJ 1263-2022 Ambient air—Determination of total suspended particle —Gravimetric method
HJ 656-2013 Technical specifications for gravimetric measurement methods for PM<下标2.5> in ambient air

Taiwan Provincial Standard of the People's Republic of China, Measuring particle size

CNS 12385-1988 3
CNS 5086-1986 1
CNS 15091-2-2007 Method of test for deep sea water - Measurement of in-situ suspended particle transmission

Standard Association of Australia （SAA）, Measuring particle size

AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
AS 2879.6:1995 Alumina - Determination of the mass distribution of particle sizes using electroformed sieves
AS 4323.2:1995(R2014) Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method
AS 2365.7:2006 Methods for sampling and analysis of indoor air - Determination of total suspended particulate matter - Gravimetric method

CEN - European Committee for Standardization, Measuring particle size

EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2@5)
EN ISO 8178-2:1996 Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 2: Measurement of Gaseous and Particulate Exhaust Emissions at Site

The American Road & Transportation Builders Association, Measuring particle size

AASHTO T 112-2000 Standard Method of Test for Clay Lumps and Friable Particles in Aggregate

Hebei Provincial Standard of the People's Republic of China, Measuring particle size

DB13/T 2375-2016 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

中国石油化工总公司, Measuring particle size

SH/T 0470-1992 Determination of solid particle impurities in synthetic aviation lubricants (gravimetric method)

Professional Standard - Energy, Measuring particle size

NB/SH/T 0868-2013 Determination of the level of cleanliness of aviation turbine fuel.Portable automatic particle counter method

Professional Standard - Agriculture, Measuring particle size

空气和废气监测分析方法 3.2.7-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Elements Seven Selenium
空气和废气监测分析方法 3.2.1-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Elements—TSP
空气和废气监测分析方法 3.2.5-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Elements Five Lead
空气和废气监测分析方法 3.2.10-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Elements Beryllium
空气和废气监测分析方法 3.2.9-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Elements Nine Antimony
空气和废气监测分析方法 3.2.4-2003 Part 3 Air Quality Monitoring Chapter 2 Particulate Matter and Its Elements Tetramercury
空气和废气监测分析方法 3.2.6-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Elements Six Arsenic
空气和废气监测分析方法 3.2.2-2003 Part 3 Air Quality Monitoring Chapter 2 Particulate Matter and Its Elements 2 PM10

Professional Standard - Commodity Inspection, Measuring particle size

SN/T 3230-2012 Determination of the level of cleanliness of aviation turbine fuel.Portable automatic particle counter method