ZH
RU
ES
The purpose of the flow meter
The purpose of the flow meter, Total:498 items.
In the international standard classification, The purpose of the flow meter involves: Measurement of fluid flow, Installations in buildings, External water conveyance systems, On-board equipment and instruments, Equipment for petroleum and natural gas industries, Thermodynamics and temperature measurements, Equipment for the chemical industry, Industrial automation systems, Linear and angular measurements, Environmental protection, Tobacco, tobacco products and related equipment, Welding, brazing and soldering, Powder metallurgy, Petroleum, petroleum products and natural gas handling equipment, Transformers. Reactors, Ventilators. Fans. Air-conditioners, Ergonomics, Railway rolling stock, Measurement of force, weight and pressure, Fasteners, Domestic electrical appliances in general, Road engineering, Pharmaceutics, Measurement of volume, mass, density, viscosity, Aerospace engines and propulsion systems, Components for electrical equipment, Floor treatment appliances, Electrical accessories, Electrical equipment for working in special conditions, Fluid power systems, Protection against fire, Quality, Rubber and plastics products, Automatic controls for household use, Power transmission and distribution networks, Electricity. Magnetism. Electrical and magnetic measurements, Medical equipment, Switchgear and controlgear, Structures of buildings, Paper and board, Geology. Meteorology. Hydrology, Body care equipment, Shipbuilding and marine structures in general, Electrical wires and cables, Lamps and related equipment, Air quality.
American National Standards Institute （ANSI), The purpose of the flow meter
Japanese Industrial Standards Committee (JISC), The purpose of the flow meter
- JIS Z 8766:1989 Methods of flow measurement by vortex flowmeters
- JIS Z 8764:1980 Method of flow measurement by electromagnetic flowmeters
- JIS Z 8765:1980 Method of flow measurement by turbine meters
- JIS B 6803:2015 Pressure regulators and pressure regulators with flow-metering devices for welding, cutting and allied processes
- JIS B 8572-3:2011 Fuel oil flow meters -- Measuring instruments used in transaction or certification -- Part 3: Small amount fuel oil flow meters
- JIS B 8572-4:2011 Fuel oil flow meters -- Measuring instruments used in transaction or certification -- Part 4: Stationary fuel oil flow meters
- JIS B 8572-4:2014 Fuel oil flow meters.Measuring instruments used in transaction or certification.Part 4: Stationary fuel oil flow meters, fuel oil flow meters on road tankers, mobile type fuel oil flow meters
- JIS B 8572-2:2011 Fuel oil flow meters -- Measuring instruments used in transaction or certification -- Part 2: Small size fuel oil flow meters on road tankers
- JIS C 8221:2020 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
- JIS B 7556:2008 Procedures of calibration and testing for gas flowmeter
- JIS B 7552:2011 Procedures for calibration and testing for liquid flowmeter
- JIS B 7411-1:2014 Glass thermometers for general -- Part 1: General measuring instruments
- JIS B 7555:2003 Method of flow measurement by coriolis meters (mass flow, density and volume flow measurement)
- JIS C 8221:1999 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
- JIS B 7556:2016 Calibration and proving test for gas flowmeter
- JIS B 7556:2022 Calibration and proving test for gas flowmeter
- JIS B 7556:2003 Proving methods and procedures for gas flowmeters
- JIS B 7411-2:2014 Glass thermometers for general -- Part 2: Measuring instruments used in transaction or certification
- JIS C 8221:2004 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
- JIS C 8222:2004 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs)
- JIS C 8472:2005 Lighting busways -- Particular safety requirements for luminaires use
BE-NBN, The purpose of the flow meter
American Society of Mechanical Engineers (ASME), The purpose of the flow meter
Association of German Mechanical Engineers, The purpose of the flow meter
Indonesia Standards, The purpose of the flow meter
- SNI 8066-2015 Tata cara pengukuran debit aliran sungai dan saluran terbuka menggunakan alat ukur arus dan pelampung
- SNI 04-3863-1995 Electrical measuring transducers for converting AC electric quantities into DC electric quantities, Part 1 : General purpose transducers
- SNI ISO 15002:2011 Flow-metering devices for connection to terminal units of medical gas pipeline systems
- SNI 04-6507.2-2002 Circuit-breakers for overcurrent protection for household and similar installations. Part 2: Circuit-breakers for a.c and d.c. operation
Society of Automotive Engineers (SAE), The purpose of the flow meter
Korean Agency for Technology and Standards (KATS), The purpose of the flow meter
- KS B ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels using current-meters or floats
- KS A 0516-2003 METHODS OF FLOW MEASUREMENT BY VORTEX FLOWMETERS
- KS B ISO 14511-2014(2019) Measurement of fluid flow in closed conduits — Thermal mass flowmeters
- KS B ISO 14511:2004 Measurement of fluid flow in closed conduits-Thermal mass flowmeters
- KS B ISO 14511:2014 Measurement of fluid flow in closed conduits — Thermal mass flowmeters
- KS B ISO TR 3313-2014(2019) Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
- KS B ISO 10790-2003(2018) Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
- KS B ISO 11631:2004 Measurement of fluid flow-Methods of specifying flowmeter performance
- KS B ISO 11631:2014 Measurement of fluid flow — Methods of specifying flowmeter performance
- KS B ISO TR 12765:2005 Measurement of fluid flow in closed conduits－Methods using transit-time ultrasonic flowmeters
- KS B ISO 1088:2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
- KS B ISO 1088:2015 Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in measurement
- KS B ISO TR 12765-2005(2020) Measurement of fluid flow in closed conduits－Methods using transit-time ultrasonic flowmeters
- KS B 5325-2009(2019) Proving methods for liquid flowmeters
- KS B ISO 10790:2003 Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
- KS M ISO 2714:2003 Liquid hydrocarbons-Volumetric measurement by displacement meter systems other than dispensing pumps
- KS M ISO 2714:2013 Liquid hydrocarbons－Volumetric measurement by displacement meter systems other than dispensing pumps
- KS B ISO 18320:2022 Hydrometry — Measurement of liquid flow in open channels — Determination of the stage–discharge relationship
- KS M ISO 2715:2003 Liquid hydrocarbons-Volumetric measurement by turbine meter systems
- KS M ISO 2715:2013 Liquid hydrocarbons－Volumetric measurement by turbine meter systems
- KS A 0611-1997(2017) Method of measurement by variable area flowmeters
- KS C IEC 60665-2002(2022) AC electric ventilating fans and regulators for household and similar purposes
- KS B ISO TR 12764:2004 Measurement of fluid flow in closed conduits-Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- KS B ISO TR 12764:2014 Measurement of fluid flow in closed conduits-Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- KS B ISO TR 12764:2015 Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- KS B ISO 13359:2014 Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
- KS B ISO 13359:2004 Measurement of conductive liquid flow in closed conduits-Flanged electromagnetic flowmeters-Overall length
- KS B ISO 13359-2014(2019) Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
- KS C IEC 60730-2-18:2003 Automatic electrical controls for household and similar use-Part 2-18:Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements
- KS C IEC 60730-2-18:2014 Automatic electrical controls for household and similar use－Part 2－18：Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements
- KS B ISO 4064-1:2002 Measurement of water flow in closed conduits－Meters for cold potable water－Part 1：Specifications
- KS C 4621-2018 Residual current operated circuit-breaker with integral overcurrent protection for household uses(RCBO)
- KS D 0035-2006 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
- KS D 0035-1985 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
- KS B ISO 7858-2:2014 Measurement of water flow in closed conduits-Combination meters for cold potable water-Part 2:Installation requirements
- KS B ISO 7858-2:2004 Measurement of water flow in closed conduits-Combination meters for cold potable water-Part 2:Installation requirements
- KS B ISO 7858-2:2015 Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 2: Installation requirements
- KS B ISO 7858-1:2004 Measurement of water flow in closed conduits-Combination meters for cold potable water-Part 1:Specifications
- KS B ISO 7858-1:2014 Measurement of water flow in closed conduits-Combination meters for cold potable water-Part 1:Specifications
- KS B ISO 7858-1:2015 Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 1: Specifications
- KS B 5640-2001(2021) Testing method of multi-path ultrasonic flowmeter
- KS M ISO 11605:2008 Paper and board－Calibration of variable-area flowmeters
- KS M ISO 11605:2003 Paper and board－Calibration of variable-area flowmeters
- KS B ISO 4371:2004 Measurement of liquid flow in open channels by weirs and flumes-End depth method for estimation of flow in non-rectangular channels with a free overfall(approximate method)
- KS B ISO 4371:2014 Measurement of liquid flow in open channels by weirs and flumes — End depth method for estimation of flow in non-rectangular channels with a free overfall(approximate method)
- KS C IEC 60665-2002(2017) AC electric ventilating fans and regulators for household and similar purposes
- KS C 4613-2019 Circuit-breaker incorporating residual current protection for industrial uses(CBR)
- KS B ISO 3455:2014 Liquid flow measurement in open channels-Calibration of rotating-element current-meters in straight open tanks
- KS B ISO 3455:2004 Liquid flow measurement in open channels-Calibration of rotating-element current-meters in straight open tanks
KR-KS, The purpose of the flow meter
- KS B ISO 748-2021 Hydrometry — Measurement of liquid flow in open channels using current-meters or floats
- KS B ISO TR 11627-2014 Measurement of liquid flow in open channels — Computing stream flow using an unsteady flow model
- KS B ISO TR 12764-2014 Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- KS B ISO 10790-2003(2023) Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
- KS D ISO 4490-2010 Metallic powders－Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
- KS B ISO 1088-2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
- KS C IEC 60665-2023 A.C. ventilating fans and regulators for household and similar purposes — Methods for measuring performance
- KS E ISO 7194-1-2018(2023) Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes
- KS B ISO 18320-2022 Hydrometry — Measurement of liquid flow in open channels — Determination of the stage–discharge relationship
- KS M ISO 11605-2003 Paper and board－Calibration of variable-area flowmeters
国家市场监督管理总局、中国国家标准化管理委员会, The purpose of the flow meter
- GB/T 36989-2018 Measurement of liquid hydrocarbons by ultrasonic flow meters
- GB/T 21391-2022 Measurement of natural gas flow by turbine gas meters
- GB/T 20728-2021 Measurement of fluid flow in closed conduits—Guidance to the selection, installation and use of Coriolis flowmeters
- GB/T 14513.3-2020 Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 3:Method for calculating steady-state flow-rate characteristics of systems
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., The purpose of the flow meter
- ASHRAE 41.10-2013 Standard Methods for Refrigerant Mass Flow Measurement Using Flowmeters
- ASHRAE 41.9-2018 Standard Methods for Refrigerant Mass Flow Measurements Using Calorimeters
- ASHRAE 3905-1995 Measurement of Turbulence Statistics in a Model Fire Room by LDV
- ASHRAE 41.10-2003 Flowmeter Test Methods for Mass Flow Measurement of Volatile Refrigerants
- ASHRAE 4595-2002 Comparison of Event Inference and Flow Trace Signature Methods for Hot Water End-Use Analysis (RP-1172)
- ASHRAE 4425-2001 Flow Calculations for Fixed-Area Expansion Devices
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), The purpose of the flow meter
- ASHRAE 41.10 ERTA-2021 Standard Method for Refrigerant Mass Flow Measurement Using Flowmeters
- ASHRAE 41.10-2008 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Flowmeters
- ASHRAE 41.8-1989 Standard Methods of Measurement of Flow of Liquids in Pipes Using Orifice Flowmeters
- ASHRAE 4841-2006 The Effect of Elbows on the Accuracy of Liquid Flow Measurement with an Insertion Flowmeter
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The purpose of the flow meter
- GB/T 18659-2023 Guidelines for the use of electromagnetic flowmeters for measuring fluid flow in closed pipes
- GB/T 18604-2001 Measurement of natural gas flow by ultrasonic flow meter
- GB/T 21446-2008 Measurement of natural gas flow by means of standard orifice meter
- GB/T 21391-2008 Measurement of natural gas flow by turbine meters
- GB/T 18604-2014 Measurement of natural gas flow by gas ultrasonic flow meters
- GB/T 18604-2023 Measuring natural gas flow with a gas ultrasonic flowmeter
- GB/T 25922-2023 Measurement of fluid flow in closed pipes The flow is measured with a vortex flowmeter installed in a pipe of circular cross-section filled with fluid
- GB/T 20727-2006 Measurement of fluid flow in closed conduits Thermal mass flowmeters
- GB/T 25922-2010 Measurement of fluid flow in closed conduits.Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- GB/T 18660-2002 Measurement of conductive liquid flow in closed conduits--Method using electromagnetic flowmeters
- GB/T 20728-2006 Measurement of fluid flow in closed conduits Guidance to the selection installation and use of Coriolis meters
- GB/T 18940-2003 Measurement of gas flow in closed conduits--Turbine meters
- GB/T 29818-2013 Mass flow meter based on HART protocol general specification
- GB/T 9109.4-1988 Dynamic measurement of crude oil--The operating stipulations of verificating positive displacement meters by pipe prover
- GB/T 29815-2013 The electromagnetic flowmeter based on HART protocol general technical specification
- GB/T 18659-2002 Measurement of fluid flow in closed conduits--Methods of evaluating the performance of electromagnetic flow-meters for liquids
- GB/T 14806-2003 A.C.electric ventilating fans and regulators for household and similar purposes
- GB/T 20729-2006 Measurement of conductive liquid flow in closed conduits Flanged electromagnetic flowmeters Overall length
- GB 28527-2012 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
- GB 4706.73-2008 Household and similar electric appliances.Safety.Particular requirements for whirlpool baths and whirpool spas
British Standards Institution (BSI), The purpose of the flow meter
- BS ISO/TS 15768:2000 Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters
- BS ISO 11631:1998 Measurement of fluid flow. Methods of specifying flowmeter performance
- BS ISO 11631:1999 Measurement of fluid flow - Methods of specifying flowmeter performance
- BS ISO/TR 12765:1998 Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
- BS 7834:1995 Specification for turbine meters used for the measurement of gas flow in closed conduits
- BS EN ISO 20456:2019 Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
- BS 7405:1991 Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits
- 16/30323541 DC BS ISO 20456. Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
- BS ISO 10790:2015 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
- BS ISO 14511:2019 Tracked Changes. Measurement of fluid flow in closed conduits. Thermal mass flowmeters
- BS ISO/TR 12765:1999 Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
- BS EN IEC 60665:2019 A.C. ventilating fans and regulators for household and similar purposes. Methods for measuring performance
- BS ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot statics tubes
- BS ISO 10790:1999 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
- BS ISO 3354:2008 Measurement of clean water flow in closed conduits - Velocity-area method using current-meters in full conduits and under regular flow conditions
- BS ISO TR 12764:1997 Measurement of fluid flow in closed conduits - Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- BS ISO TR 12764:1998 Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- BS 1042 Sec.2.4:1989 Measurement of fluid flow in closed conduits. Velocity-area methods. Method of measurement of clean water flow using current meters in full conduits and under regular flow conditions
- BS EN ISO 15002:2008+A1:2019 Flow-metering devices for connection to terminal units of medical gas pipeline systems
- BS ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
- BS EN ISO 748:2007 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats
- BS DD ISO/TS 14934-4:2007 Fire tests - Calibration of heat flux meters - Guidance on the use of heat flux meters in fire tests
- BS 1042 Sec.2.3:1984 Measurement of fluid flow in closed conduits. Velocity area methods. Methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
- BS 3680-5:1992 Measurement of liquid flow in open channels - Slope area method of estimation
- BS EN 17526:2021 Gas meter. Thermal-mass flow-meter based gas meter
- BS EN ISO 17657-2:2006 Resistance welding - Welding current measurement for resistance welding - Welding current meter with current sensing coil
- 23/30456713 DC BS ISO 24062. Measurement of fluid flow in closed conduits. Clamp-on ultrasonic transit-time meters for liquids and gases
- BS ISO 14934-4:2014 Fire tests. Calibration and use of heat flux meters. Guidance on the use of heat flux meters in fire tests
- BS ISO 12764:2017 Tracked Changes. Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- BS ISO 22192:2021 Bunkering of marine fuel using the Coriolis mass flow meter (MFM) system
- BS EN ISO 4490:2002 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
- BS ISO 6358-3:2014 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. Method for calculating steady-state flow-rate characteristics of systems
- BS ISO/TS 15769:2001 Hydrometric determination - Liquid flow in open channels and partly filled pipes - Guidelines for the application of Doppler-based flow measurements
- BS EN 60335-2-60:2003+A12:2010 Household and similar electrical appliances - Safety - Particular requirements for whirlpool baths and whirlpool spas
- BS ISO 17089-1:2010 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas. Meters for custody transfer and allocation measurement
- BS ISO 21562:2020 Ships and marine technology. Bunker fuel mass flow meters on receiving vessel. Requirements
- BS EN 61008-1:2004+A13:2012 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). General rules
- BS EN ISO 13517:2013 Metallic powders. Determination of flowrate by means of a calibratedfunnel (Gustavsson flowmeter)
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The purpose of the flow meter
- GB/T 34041.1-2017 Measurement of fluid flow in closed conduits—Ultrasonic meters for gas—Part 1: Meters for custody transfer and allocation measurement
- GB/T 34041.2-2017 Measurement of fluid flow in closed conduits—Ultrasonic meters for gas—Part 2: Meters for industrial applications
- GB/T 34166-2017 Measumement of natural gas flow by means of standard nozzle meters
- GB/T 35138-2017 Measurement of fluid flow in closed conduits—Ultrasonic transit-time meters for liquid
- GB/T 14806-2017 A.C.electric ventilating fans andregulators for household and similar purposes
- GB/T 28527-2012 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
国家能源局, The purpose of the flow meter
- SY/T 7551-2019 Measuring natural gas flow with channel flowmeter
- SY/T 6658-2021 Measuring natural gas flow using a precession vortex flowmeter
- SY/T 7552-2020 Guide to Selection of Flowmeters for Natural Gas Trade Measurement
- SY/T 6659-2016 Measuring natural gas flow with a Coriolis mass flow meter
- SY/T 6660-2021 Measuring natural gas flow with a rotary positive displacement gas flow meter
- NB/T 42108-2017 Connecting device busbars for low-voltage circuits for household and similar purposes
IN-BIS, The purpose of the flow meter
未注明发布机构, The purpose of the flow meter
- BS 7405:1991(2000) Guide to Selection and application of flowmeters for the measurement of fluid flow in closed conduits
- BS ISO 11631:1998(1999) Measurement of fluid flow — Methods of specifying flowmeter performance
- BS ISO TS 15768:2000 Measurement of liquid velocity in open channels - Design , selection and use of electromagnetic current meters
- BS EN ISO 6817:1997(1999) Measurement of conductive liquid flow in closed conduits — Method using electromagnetic flowmeters
- BS ISO/TR 11974:1997(1999) Measurement of liquid flow in open channels — Electromagnetic current meters
- BS ISO/TR 12764:1997(1999) Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross - section conduits running full
- BS ISO 13359:1998(1999) Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
- DIN EN 13465:2004 Ventilation of buildings – calculation method for determining air volume flows in apartments
International Organization for Standardization (ISO), The purpose of the flow meter
- ISO/TR 6817:1980 Measurement of conductive fluid flowrate in closed conduits — Method using electromagnetic flowmeters
- ISO 11631:1998 Measurement of fluid flow - Methods of specifying flowmeter performance
- ISO/TR 11627:1998 Measurement of liquid flow in open channels - Computing stream flow using an unsteady flow model
- ISO 20456:2017 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
- ISO/TR 12765:1998 Measurement of fluid flow in closed conduits - Methods using transit-time ultrasonic flowmeters
- ISO 14511:2001 Measurement of fluid flow in closed conduits - Thermal mass flowmeters
- ISO 14511:2019 Measurement of fluid flow in closed conduits — Thermal mass flowmeters
- ISO 12764:2017 Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
- ISO 5168:1978 Measurement of fluid flow; Estimation of uncertainty of a flow-rate measurement
- ISO 10790:1994 Measurement of fluid flow in closed conduits — Coriolis mass flowmeters
- ISO/TS 15768:2000 Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters
- ISO 2715:2017 Liquid hydrocarbons. Volumetric measurement by turbine flowmeter. Volumetric measurement by turbine meter systems
- ISO 12242:2012 Measurement of fluid flow in closed conduits - Ultrasonic transit-time meters for liquid
- ISO 6817:1992 Measurement of conductive liquid flow in closed conduits; method using electromagnetic flowmeters
- ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
- ISO 10790:2015 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
- ISO 2715:1981 Liquid hydrocarbons; Volumetric measurement by turbine meter systems
- ISO 3354:2008 Measurement of clean water flow in closed conduits - Velocity-area method using current-meters in full conduits and under regular flow conditions
- ISO 17089-1:2010 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 1: Meters for custody transfer and allocation measurement
- ISO 7194:1983 Measurement of fluid flow in closed conduits; Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
- ISO 5167-5:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters
- ISO 5167-6:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 6: Wedge meters
- ISO 748:2007 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats
- ISO 10790:1999 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
- ISO 7858-1:1985 Measurement of water flow in closed conduits; Meters for cold potable water; Combination meters; Part 1 : Specifications
- ISO 9104:1991 Measurement of fluid flow on closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids
- ISO 17089-2:2012 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 2: Meters for industrial applications
- ISO/DIS 24062 Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases
- ISO/FDIS 24062:2023 Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases
- ISO 13517:2013 Metallic powders.Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter)
- ISO 7858-2:1987 Measurement of water flow in closed conduits; Meters for cold potable water; Combination meters; Part 2 : Installation requirements
- ISO 9951:1993 Measurement of glas flow in closed conduits; turbine meters
- ISO 4490:2001 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
- ISO 4490:2008 Metallic powders — Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (Fourth Edition)
- ISO 4490:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- ISO 4490:1978 Metallic powders; Determination of flowability by means of a calibrated funnel (Hall flowmeter)
- ISO 4490:2018 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- ISO 3354:1988 Measurement of clean water flow in closed conduits; velocity-area method using current-meters in full conduits and under regular flow conditions
- ISO 13517:2020 Metallic powders — Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter)
- ISO 22192:2021 Bunkering of marine fuel using the Coriolis mass flow meter (MFM) system
- ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
- ISO 11605:1995 Paper and board - Calibration of variable-area flowmeters
- ISO/TR 24578:2012 Hydrometry - Acoustic Doppler profiler - Method and application for measurement of flow in open channels
- ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
- ISO 4064-2:1978 Measurement of water flow in closed conduits; Meters for cold potable water; Part II : Installation requirements
API - American Petroleum Institute, The purpose of the flow meter
- API VORTEX SHEDDING-2007 Vortex Shedding Flowmeter for Measurement of Hydrocarbon Fluids
- API TR 2577-2018 Performance of Full-bore Vortex Meters for Measurement of Liquid Flows (FIRST EDITION)
- API RP 85 RUSSIAN-2003 Use of Subsea Wet-gas Flowmeters in Allocation Measurement Systems (ПЕРВОЕ ИЗДАНИЕ)
- API TR 2578-2017 Flow Conditioner Installation and Effects on Turbine Meters (FIRST EDITION)
- API MPMS 21.2 ADD-2000 Manual of Petroleum Measurement Standards Chapter 21-Flow Measurement Using Electronic Metering Systems Addendum to Section 2-Flow Measurement Using Electronic Metering Systems@ Inferred Mass (First Edition)
- API H00008-2002 Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology (First Edition)
- API PUBL 2566-2004 State of the Art Multiphase Flow Metering (First Edition)
- API PUBL 2565-2004 State of the Art Multiphase Flow Metering (FIRST EDITION)
- API MPMS 21.2-1998 Manual of Petroleum Measurement Standards Chapter 21-Flow Measurement Using Electronic Metering Systems - Section 2-Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters (First Edition)
AENOR, The purpose of the flow meter
- UNE 22306:1996 MINING AIR FLOW METERS. GAUGING.
- UNE-EN ISO 748:2009 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats (ISO 748:2007)
- UNE-EN ISO 6817:1996 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS. METHOD USING ELECTROMAGNETIC FLOWMETERS. (ISO 6817:1992).
- UNE-EN 29104:1996 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS. METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOW-METERS FOR LIQUIDS. (ISO 9104:1991).
Association Francaise de Normalisation, The purpose of the flow meter
- NF X10-106:1983 Mesure de débit des fluides - Calcul de l'erreur limite sur une mesure de débit
- NF X10-121*NF EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
- NF EN ISO 20456:2019 Mesurage du débit des fluides dans les conduites fermées - Lignes directrices pour l'utilisation des débitmètres électromagnétiques dans les liquides conducteurs
- NF X10-301:2009 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats.
- NF X10-121:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids.
- NF X10-120:1995 Measurement of conductive liquid flow in closed conduits. Method using electromagnetic flow meters.
- NF A95-114:2013 Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter)
- NF E49-160-3*NF ISO 6358-3:2015 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fmuids - Part 3 : method for calculating steady-state flow-rate characteristics of systems
- NF X10-320:1989 Liquid flow measurement in open channels. Rotating element current-meters.
- NF E17-307*NF EN 17526:2021 Gas meter - Thermal-mass flow-meter based gas meter
- NF C61-163*NF EN 62020:1999 Electrical accessories. Residual current monitors for household and similar uses (RCMS).
- NF A95-113:2008 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter).
- NF A95-113:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- NF C61-150:1995 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (rccb'S).
- NF X10-111:1988 Measurement of clean water flow in closed conduits. Velocity-area method using current-meters in full conduits and under regular flow conditions.
- NF M08-038*NF ISO 2715:2020 Liquid hydrocarbons - Volumetric measurement by turbine flowmeter
- NF EN 17526:2021 Compteurs de gaz - Compteur de gaz basé sur un débitmètre massique par effet thermique
- NF X10-102-5*NF EN ISO 5167-5:2016 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5 : cone meters
- NF P78-459*NF EN 675:2011 Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method
- NF X10-334:1993 Measurement of liquid flow in open channels. Measurement of discharge by the ultrasonic (acoustic) method.
Professional Standard - Petroleum, The purpose of the flow meter
- SY/T 6658-2006 Measurement of natural gas flow by vortex precession meter
- SY/T 6682-2007 Measurement of liquid hydrocarbons by Coriolis meters
- SY/T 6143-2004 Measuring Natural Gas Flow with a Standard Orifice Flow Meter
- SY 6658-2006 Measuring Natural Gas Flow with a Precession Vortex Flowmeter
- SY/T 6659-2006 Measurement of natural gas by Coriolis meter
- SY/T 6660-2006 Measurement of natural gas flow by rotary displacement gas meters
- SY 6660-2006 Measuring Natural Gas Flow with Rotary Positive Displacement Gas Flow Meters
- SY 6682-2007 Measuring Liquid Hydrocarbon Flow with Coriolis Flowmeter
- SY/T 6999-2014 General requirements for flow meters on-line verification with a traveling gas flow standard facility
- SY 6999-2014 General requirements for on-line verification of flowmeters with mobile gas flow standard devices
- SY/T 6143-1996 Standard orifice measurement method for natural gas flow
RO-ASRO, The purpose of the flow meter
- STAS R 12091-1982 MEASUREMENT OF FLUID FLOW Estimation of uncertainty af a flow-rate measurement
- STAS 8603/2-1970 Telecommunications COMMON QUANTITYS Quantitys for general purposes
- STAS SR EN 60898+A1-1995 Circuit-breakers for overcurrent protection for Household and similar installations
European Committee for Standardization (CEN), The purpose of the flow meter
- EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
- EN ISO 5167-6:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters (ISO 5167-6:2022)
- EN ISO 748:2000 Measurement of Liquid Flow in Open Channels - Velocity-Area Methods ISO 748:1997
- EN ISO 748:2021 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021)
- EN ISO 748:2007 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats
- EN ISO 6817:1995 Measurement of Conductive Liquid Flow in Closed Conduits - Method Using Electromagnetic Flowmeters ISO 6817: 1992
- EN ISO 13517:2020 Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)
- EN ISO 13517:2013 Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter)
- FprEN 17526-2021 Gas meter - Thermal-mass flow-meter based gas meter
- EN 17526:2021 Gas meter - Thermal-mass flow-meter based gas meter
- EN ISO 4490:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2014)
- EN ISO 4490:2018 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- EN ISO 4490:2008 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
TR-TSE, The purpose of the flow meter
- TS 3072-1978 Measurement Of Clean Water Flow In Closed Conduits - Velocity - Area Method Using Current - Meters
Professional Standard - Chemical Industry, The purpose of the flow meter
Danish Standards Foundation, The purpose of the flow meter
- DS/EN 29104:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids
- DS/EN ISO 748:2008 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats
- DS/EN ISO 6817:1996 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
- DS/EN 29104:1994 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
- DS/ISO 9104:1994 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
- DS/IEC 62640:2011 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
- DS/HD 62640:2021 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
- DS/EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
German Institute for Standardization, The purpose of the flow meter
- DIN EN ISO 20456:2020-09 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017); German version EN ISO 20456:2019
- DIN 10255:1992 Analysis of tobacco and tobacco products; determination of flow rates of gas using the soap film bubble flowmeter
- DIN EN ISO 20456:2020 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
- DIN 19204:1976 Flow measurement; ranges, divisions and inscriptions of scales for flow indicators
- DIN 4567-5:2023-01 Ladders for special professional use - Part 5: Design criteria for special purpose ladders
- DIN EN ISO 15002:2020-05 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008 + Amd.1:2018); German version EN ISO 15002:2008 + A1:2019 / Note: To be replaced by DIN EN ISO 15002 (2022-07).
- DIN EN ISO 748:2008 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats (ISO 748:2007); English version of DIN EN ISO 748:2008-02
- DIN EN 29104:1993 Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991); German version EN 29104:1993
- DIN EN 17526:2020 Gas meters - Thermal-mass flow-meter based gas meter; German and English version prEN 17526:2020
- DIN EN 17526:2020-07 Gas meters - Thermal-mass flow-meter based gas meter; German and English version prEN 17526:2020 / Note: Date of issue 2020-05-29
- DIN EN ISO 4490:2009 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2008); English version of DIN EN ISO 4490:2009-02
- DIN 28127 Bb.1:1987 Flow funnels for half-pipe coil jackets for vessels; example for calculation
- DIN ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged-type electromagnetic flowmeters - Overall length (ISO 13359:1998)
- DIN V 10378:2006 Cigarettes - Soap film bubble flowmeter for the determination of puff volume using a cigarette smoking machine
ES-UNE, The purpose of the flow meter
- UNE-EN ISO 20456:2021 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
- UNE-EN IEC 60665:2019 A.C. ventilating fans and regulators for household and similar purposes - Methods for measuring performance
- UNE-EN 17526:2022 Gas meter - Thermal-mass flow-meter based gas meter
- UNE-HD 62640:2016/A11:2016 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
- UNE-HD 62640:2016/A12:2022 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
- UNE-HD 62640:2016 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
AT-ON, The purpose of the flow meter
- ONORM B 2403-1998 Liquid flow measurement in using propeller-type current meters
- ONORM M 5921-1988 Heatmeters (meters for quantities of heat) for liquid heat carrier fluids; requirements for measurement
- ONORM M 5880-1998 Flow measurement in wastewater treatment plants - Venturi flumes and inductive flowmeters
- ONORM M 5920-1988 Heatmeters (meters for quantities of heat) for liquid heat carrier fluids; general basic Information
- ONORM M 5922-1982 Heatmeters (meters for quantities of heat) for liquid carrier fluids; directives for dimensioning and installation
- ONORM EN 29104-1993 Measurement of fluid flow in closed conduits - Methods of evaluating the Performance of electromagnetic flow-meters forliquids (ISO 9104:1991)
Group Standards of the People's Republic of China, The purpose of the flow meter
- T/BAS 003-2022 Measurement of fluid flow by means of fixed value standard nozzles meter inserted in circular cross-section conduits running full
- T/NFX 15-2021 Quiet AC Ventilation Fans for Household and Similar Uses
- T/YIIEE 11-2023 Small circuit breakers for AC use in household and similar applications
- T/SMA 0036-2023 Technical Specification for 10kV～35kV Metering Current Transformers
ISA - International Society of Automation, The purpose of the flow meter
- ISA RP16.6-1961 Methods and Equipment for Calibration of Variable Area Meters (Rotameters)
- ISA RP16.4-1960 Nomenclature and Terminology for Extension - Type Variable Area Meters (Rotameters)
- ISA RP31.1-1977 Specification@ Installation@ and Calibration of Turbine Flowmeters
American Society for Testing and Materials (ASTM), The purpose of the flow meter
- ASTM B213-13 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B855-11 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
- ASTM B213-11 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B213-20 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B213-17 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM E968-99 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
- ASTM E2380-05 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
- ASTM E2380/E2380M-09 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
- ASTM D4409-95(2008) Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
- ASTM D5089-95(1999) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
- ASTM D4409-95(2003) Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
- ASTM D5089-95(2014) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
- ASTM E2380/E2380M-15 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
- ASTM E2380/E2380M-15(2019) Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
- ASTM B855-17 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
- ASTM D4409-95(1999) Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
- ASTM D4409-95(2014) Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
- ASTM E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
- ASTM D5389-93(2007) Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
- ASTM D3404-91(1998) Standard Guide for Measuring Matric Potential in the Vadose Zone Using Tensiometers
- ASTM D5389-93(2002) Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
- ASTM D3404-91(2013) Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
- ASTM D3404-15 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
- ASTM D5389-93(2013) Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
SAE - SAE International, The purpose of the flow meter
Lithuanian Standards Office , The purpose of the flow meter
- LST EN ISO 748:2008 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats (ISO 748:2007)
- LST EN ISO 6817:2001 Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992)
- LST EN 29104-2001 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
- LST HD 62640/A12-2021 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
Professional Standard - Machinery, The purpose of the flow meter
- JB/T 53278-1999 General purpose axial flow compressor product quality classification
- JB/T 53276-1999 General purpose axial fan product quality classification
- JB/T 9242-1999 General technical specifications for positive displacement flowmeter
- JB/T 9242-2015 Positive displacement flowmeters for liquids.General technical requirements
- JB/T 10181.21-2014 Electric cables.Calculation of the current rating.Part 21: Thermal resistance.Calculation of thermal resistance
Natural Gas Processor's Association (NGPA), The purpose of the flow meter
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, The purpose of the flow meter
- GJB 5998-2007 Specincation for electromagnetic flowmeters of ships
Professional Standard - Electricity, The purpose of the flow meter
GOSTR, The purpose of the flow meter
- PNST 371-2019 Roads of general use with low traffic. Road pavement. Design and calculation
- GOST R 8.995-2020 State system for ensuring the uniformity of measurements. Volume flow rate and quantity of natural gas. Measurements procedure (method) using volumetric diaphragm and fluidics gas meters
- GOST R 58401.23-2019 Automobile roads of general use. Stone-mastic asphalt concrete mixtures. Volumetric-functional design system. Method for determination of draindown of binder
- GOST R 58818-2020 Automobile roads with low traffic volume. Design, construction and calculation
- GOST R 58400.2-2019 Automobile roads of general use. Petroleum-based bituminous binders. Specifications based on traffic loads
American Petroleum Institute (API), The purpose of the flow meter
Standard Association of Australia （SAA）, The purpose of the flow meter
- AS 3778.4.10:2022 Measurement of water flow in open channels, Part 4.10: Measurement using flow gauging structures — End-depth method for estimation of flow in channels with a free overfall (ISO 18481:2017, IDT)
- AS 2651:1983 Liquid hydrocarbons - Volumetric measurement by turbine meter systems
- AS 3778.3.1:2001 Measurement of water flow in open channels - Velocity-area methods - Measurement by current meters and floats
- AS 3778.2.4:2007 Measurement of water flow in open channels - General - Estimation of uncertainty of a flow rate measurement
- AS 2224.1:1986 Medicine measures (including paediatric droppers) - Glass - For general use
- AS 3778.2.4:2001 Measurement of water flow in open channels Part 2.4: General--Estimation of uncertainty of a flow-rate measurement
- AS 4250.4:1995 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Temperature corrections in volumetric calibration by water transfer method
- AS 3778.4.2:2022 Measurement of water flow in open channels, Part 4.2: Measurement using flow gauging structures — Rectangular broad-crested weirs (ISO 3846:2008, IDT)
ETSI - European Telecommunications Standards Institute, The purpose of the flow meter
- TS 102 845-2018 User Group; Quality of ICT Services; Requirements for Check-up on Metering and Billing Processes (V2.0.0)
- TS 102 845-2010 User Group; Quality of ICT Services; Requirements for Check-up on Metering and Billing Processes (V1.2.1)
Compressed Gas Association (U.S.), The purpose of the flow meter
- CGA E-7-2013 MEDICAL GAS PRESSURE REGULATORS, FLOWMETERS, AND ORIFICE FLOW SELECTORS
International Electrotechnical Commission (IEC), The purpose of the flow meter
- IEC 62888-6:2019 Railway applications - Energy measurement on board trains - Part 6: Requirements for purposes other than billing
- IEC 62640:2011/AMD1:2015 Residual current devices with or without overcurrent protection for
socket-outlets for household and similar uses
- IEC 60665:1980 A.C. electric ventilating fans and regulators for household and similar purposes
RU-GOST R, The purpose of the flow meter
- GOST 26969-1986 Standard orifice plates for flowmeters. Specifications
- GOST R 55421-2013 General use highways. Emulsion bitumen road cationic. Method for determination of apparent viscosity
- PNST 161-2016 Mining equipment. Multipurpose safety systems and automated control systems for technological processes in the mine. Requirements for metrological providing and test methods
- GOST R ISO 21747-2010 Statistical methods. Process performance and capability statistics for measured quality characteristics
- GOST 13045-1981 General industrial rotameters. General specifications
Aerospace Industries Association/ANSI Aerospace Standards, The purpose of the flow meter
PL-PKN, The purpose of the flow meter
IT-UNI, The purpose of the flow meter
CZ-CSN, The purpose of the flow meter
ESDU - Engineering Sciences Data Unit, The purpose of the flow meter
NL-NEN, The purpose of the flow meter
- NEN-ISO 9104:1994 Measurement of fluid flow in xlosed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
Professional Standard - Building Materials, The purpose of the flow meter
- JC/T 916-2014 Chute solids flow weighfeeder for building material industry
- JC/T 916-2003 Chute solids flow meter in building material industry
VN-TCVN, The purpose of the flow meter
- TCVN 6816-2001 Measurement of fluid flow in closed conduits.Methods using transit-time ultrasonic flowmeters
National Metrological Technical Specifications of the People's Republic of China, The purpose of the flow meter
- JJF 1261.10-2017 Rules of Metrology Testing for Energy Efficiency of Household and Similar Microwave Ovens
- JJF 1261.10-2023 Rules of Metrology Testing for Energy Efficiency of Household and Similar Microwave Ovens
- JJF 1261.10-2013 Rules of Metrology Testing for Energy Efficiency Label of Household and Similar Microwave Ovens
TH-TISI, The purpose of the flow meter
- TIS 909-2005 Residual current operated circuit.breakers with integral overcurrent protection for household and similar uses (rcbos)
CEN - European Committee for Standardization, The purpose of the flow meter
- EN ISO 4490:2001 Metallic Powders - Determination of Flow Time by Means of a Calibrated Funnel (Hall Flowmeter)
American Water Works Association (AWWA), The purpose of the flow meter
Institute of Electrical and Electronics Engineers (IEEE), The purpose of the flow meter
Underwriters Laboratories (UL), The purpose of the flow meter
CN-QIYE, The purpose of the flow meter
- Q/GDW 1572-2014 Technical specifications for low-voltage current transformers for metering
Professional Standard - Military and Civilian Products, The purpose of the flow meter
- WJ 2281-1995 Verification rules for flowmeters for testing chemical defense equipment
CENELEC - European Committee for Electrotechnical Standardization, The purpose of the flow meter
- FPRHD 62640-2014 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
European Committee for Electrotechnical Standardization（CENELEC）, The purpose of the flow meter
- HD 62640:2015 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
YU-JUS, The purpose of the flow meter
- JUS U.C5.092-1994 Liquid flow measurement in open channels by weirs and flumes - End-depth method for estimation of flow in rectangular channels with a free overfall
US-FCR, The purpose of the flow meter
ZA-SANS, The purpose of the flow meter
Military Standard of the People's Republic of China-General Armament Department, The purpose of the flow meter
- GJB 1808-1993 Calibration method of vacuum gauge dynamic flow method
Anhui Provincial Standard of the People's Republic of China, The purpose of the flow meter
- DB34/T 3373-2019 Test methods for heat transfer and fluid resistance of heat exchangers for household and similar electrical appliances
工业和信息化部, The purpose of the flow meter
- YD/T 3482-2019 Technical requirements for application security audit based on mobile network traffic
Professional Standard - Urban Construction, The purpose of the flow meter
- CJ/T 3063-1997 Ultrasonic flowmeter for potable water and drain water (Transmission speed difference method)