ZH
RU
ES
Powder flow meter
Powder flow meter, Total:214 items.
In the international standard classification, Powder flow meter involves: Powder metallurgy, Testing of metals, Graphical symbols, Equipment for the chemical industry, Paints and varnishes, Iron and steel products, Geology. Meteorology. Hydrology, Measurement of fluid flow, Linear and angular measurements, Products of the chemical industry, Plastics, Ceramics, Analytical chemistry, Ferrous metals, Construction of waterways and ports, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Glass, Electronic components in general, PAINT AND COLOUR INDUSTRIES, Measurement of volume, mass, density, viscosity, Mechanical testing, Particle size analysis. Sieving, Welding, brazing and soldering, Hydraulic energy engineering, Food products in general.
SE-SIS, Powder flow meter
RO-ASRO, Powder flow meter
Association Francaise de Normalisation, Powder flow meter
- NF A95-113:1984 Powder metallurgy. Metallic powders. Determination of flowability by means of a calibrated funnel (hall flowmeter).
- NF T30-499-5:2011 Coating powders - Part 5 : determination of flow properties of a powder/air mixture.
- NF T30-499-5*NF EN ISO 8130-5:2021 Coating powders - Part 5 : determination of flow properties of a powder/air mixture
- NF EN ISO 8130-5:2021 Poudres pour revêtement - Partie 5 : détermination de l'aptitude à la fluidisation d'un mélange poudre/air
- A92-050:1991 Vitreous and porcelain enamels. Fluidity of electrostatic powders.
- NF T30-499-11*NF EN ISO 8130-11:2019 Coating powders - Part 11 : inclined-plane flow test
- NF EN ISO 14629:2016 Céramiques techniques - Détermination de l'aptitude à l'écoulement des poudres céramiques
- NF EN ISO 8130-11:2019 Poudres pour revêtement - Partie 11 : essai d'écoulement sur plan incliné
- NF A95-114*NF EN ISO 13517:2020 Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter)
- NF A95-113:2008 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter).
- NF A95-113:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- NF A95-113*NF EN ISO 4490:2018 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- NF T30-499-11:2011 Coating powders - Part 11 : inclined-plane flow test.
- NF EN ISO 13517:2020 Poudres métalliques - Détermination du temps d'écoulement au moyen d'un entonnoir calibré (cône d'écoulement de Gustavsson)
- NF EN ISO 10070:2019 Poudres métalliques - Détermination de la surface spécifique d'enveloppe à partir de mesures de la perméabilité à l'air d'un lit de poudre dans des conditions d'écoulement permanent
Japanese Industrial Standards Committee (JISC), Powder flow meter
- JIS Z 2502:2000 Metallic powders -- Determination of flowability by means of a calibrated funnel (Hall flowmeter)
- JIS Z 2502:2012 Metallic powders -- Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- JIS Z 8842:1998 Instrumentation symbols for powder processes
- JIS Z 2502:1979 Method for determination of flow rate of metal powders
American Society for Testing and Materials (ASTM), Powder flow meter
- ASTM B213-03 Standard Test Method for Flow Rate of Metal Powders
- ASTM B213-97 Standard Test Method for Flow Rate of Metal Powders
- ASTM D7743-12 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders
- ASTM D7891-15 Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell
- ASTM B964-09 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- ASTM B855-17 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
- ASTM D2396-94(2004) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
- ASTM D2396-94(1999)e1 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
- ASTM D2396-94(2012) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
- ASTM D2396-20 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
- ASTM B212-09 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM D6941-04 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders
- ASTM D6941-19 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders
- ASTM B213-11 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B213-20 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B213-17 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B213-13 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B703-05 Standard Test Method for Apparent Density of Powders Using Arnold Meter
- ASTM B703-10 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
- ASTM D4242-07(2017) Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Powder flow meter
- GB/T 1482-2010 Metallic powders.Determination of flow time by means of a calibrated funnel(Hall flowmeter)
- GB/T 1482-2022 Metallic powders—Determination of flow rate—Calibrated funnel methods（Hall flowmeter）
- GB/T 1482-1984 Metallic powders--Determination of flowability by means of a calibrated funnel(Hall flowmeter)
- GB/T 11826.2-2012 Current meter and flow meter.Part 2:Ultrasonic current meter
- GB/T 21782.5-2010 Coating powders.Part 5:Determination of flow properties of a powder/air mixture
- GB/T 11826-2002 Rotating current meter
- GB/T 11827-1989 Cup-type current meter
- GB/T 43096-2023 Determination of external specific surface area by powder layer permeability test under steady flow conditions of metal powder
- GB/T 24558-2009 Acoustic Doppler current profiler
- GB/T 28861-2012 Test method for measuring melt fluidity of encapsulating material of powdered epoxy
- GB/T 21782.11-2010 Coating powders.Part 9:Inclined-plane flow test
(U.S.) Ford Automotive Standards, Powder flow meter
British Standards Institution (BSI), Powder flow meter
- BS ISO 8130-15:2023 Coating powders - Rheology
- BS EN ISO 8130-5:2010 Coating powders. Determination of flow properties of a powder/air mixture
- BS EN ISO 8130-11:2010 Coating powders. Inclined-plane flow test
- BS EN ISO 8130-5:2021 Tracked Changes. Coating powders. Determination of flow properties of a powder/air mixture
- BS ISO 18549-2:2009 Metallic powders - Determination of apparent density and flow rate at elevated temperatures - Determination of flow rate at elevated temperatures
- 20/30421045 DC BS EN ISO 8130-5. Coating powders. Part 5. Determination of flow properties of a powder/air mixture
- BS EN ISO 8130-11:2019 Tracked Changes. Coating powders. Inclined-plane flow test
- BS 3900-J11:1997 Methods of test for paints - Testing of coating powders - Determination of flow of coating powders (inclined-plane method)
- 22/30441981 DC BS ISO 8130-15. Coating powders. Part 15. Rheology
- BS ISO 18549-1:2009 Metallic powders - Determination of apparent density and flow rate at elevated temperatures - Determination of apparent density at elevated temperatures
- BS EN ISO 4490:2002 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
- BS EN ISO 10070:2019 Metallic powders. Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
- BS EN ISO 13517:2020 Metallic powders. Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter)
- BS EN ISO 4490:2014 Metallic powders. Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- BS EN ISO 4490:2008 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
- BS EN ISO 4490:2018 Tracked Changes. Metallic powders. Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- BS DD ISO/TS 24154:2006 Hydrometry - Measuring river velocity and discharge with acoustic Doppler profilers
- BS EN ISO 13517:2013 Metallic powders. Determination of flowrate by means of a calibratedfunnel (Gustavsson flowmeter)
IN-BIS, Powder flow meter
Group Standards of the People's Republic of China, Powder flow meter
RU-GOST R, Powder flow meter
- GOST 20899-1998 Metallic powders. Determination of flowability by means of a calibrated funnel (Hall flowmeter)
- GOST 20899-1975 Metal powders. Method of yield determination
- GOST 15126-1980 Water flow rate measuring instruments. Fluvial hydrometric curremt meters. General technical requirements
国家市场监督管理总局、中国国家标准化管理委员会, Powder flow meter
- GB/T 41329-2022 Determination of flow rate of metallic powders—Calibrated funnel method (Gustavsson flowmeter)
- GB/T 40380.2-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures
- GB/T 11826-2019 Rotating-element current-meters
- GB/T 40934-2021 Rotational moulding—Test method for powder flowability
- GB/T 39696-2020 Determination of flowability of fine ceramic powders—Calibrated funnel
- GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures
- GB/T 14614-2019 Inspection of grain and oils—Doughs rheological properties determination of wheat flour—Farinograph test
Professional Standard - Aviation, Powder flow meter
- HB 5441.6-1989 Performance testing of powder metallurgy products and powders Test methods for fluidity of metal powders
CZ-CSN, Powder flow meter
Professional Standard - Water Conservancy, Powder flow meter
YU-JUS, Powder flow meter
HU-MSZT, Powder flow meter
CEN - European Committee for Standardization, Powder flow meter
- EN ISO 8130-11:2019 Coating powders - Part 11: Inclined-plane flow test
- EN ISO 4490:2001 Metallic Powders - Determination of Flow Time by Means of a Calibrated Funnel (Hall Flowmeter)
GM North America, Powder flow meter
European Committee for Standardization (CEN), Powder flow meter
- EN ISO 8130-11:2010 Coating powders - Part 11: Inclined-plane flow test
- EN ISO 4490:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2014)
- EN ISO 4490:2018 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- EN ISO 4490:2008 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- EN 50017:1978 Electrical apparatus for potentially explosive atmospheres; Powder filling "q"
- EN 50017:1978/A1:1979 Electrical apparatus for potentially explosive atmospheres; powder filling q
- EN ISO 10070:2019 Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019)
- prEN 50017-1993 Electrical apparatus for potentially explosive atmospheres; powder filling "q"
Taiwan Provincial Standard of the People's Republic of China, Powder flow meter
Professional Standard - Commodity Inspection, Powder flow meter
- SN/T 4008-2013 Rapid qualitative screening of talc powder.Powder X-ray diffraction method
Professional Standard - Ocean, Powder flow meter
International Organization for Standardization (ISO), Powder flow meter
- ISO 8130-5:1992 Coating powders; part 5: determination of flow properties of a powder/air mixture
- ISO 8130-5:2021 Coating powders - Part 5: Determination of flow properties of a powder/air mixture
- ISO 8130-15:2023 Coating powders — Part 15: Rheology
- ISO 8130-11:2019 Coating powders — Part 11: Inclined-plane flow test
- ISO 4490:2001 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
- ISO 4490:2008 Metallic powders — Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (Fourth Edition)
- ISO 4490:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- ISO 4490:1978 Metallic powders; Determination of flowability by means of a calibrated funnel (Hall flowmeter)
- ISO 4490:2018 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
- ISO 10070:1991 Metallic powder; determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
- ISO/TS 15768:2000 Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters
- ISO 10070:2019 Metallic powders — Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
- ISO/TS 24154:2005 Hydrometry - Measuring river velocity and discharge with acoustic Doppler profilers
- ISO 13517:2020 Metallic powders — Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter)
Danish Standards Foundation, Powder flow meter
- DS/EN ISO 8130-5:2011 Coating powders - Part 5: Determination of flow properties of a powder/air mixture
- DS/ISO 8130-5:2021 Coating powders – Part 5: Determination of flow properties of a powder/air mixture
- DS/EN ISO 8130-5:2021 Coating powders – Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)
- DS/EN ISO 8130-11:2011 Coating powders - Part 11: Inclined-plane flow test
- DS/EN ISO 13517:2013 Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter)
- DS/EN ISO 4490:2008 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
IT-UNI, Powder flow meter
Korean Agency for Technology and Standards (KATS), Powder flow meter
- KS M ISO 8130-5-2008(2019) Coating powders－Part 5：Determination of flow properties of a powder/air mixture
- KS L 1626-2012 Testing method for flowability of fine ceramic powders
- KS M ISO 8130-11-2008(2019) Coating powders－Part 11：Inclined-plane flow test
- KS B ISO TR 11974:2005 Measurement of liquid flow in open channels－Electromagnetic current meters
- KS D ISO 10070:2004 Metallic powders－Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
- KS D ISO 4490:2010 Metallic powders-Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
- KS D ISO 4490:2013 Metallic powders－Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
- KS D 0410-2012(2017) Method for determination of flow rate at elevated temperatures for powder mixed intended for warm compacting
- KS D 0035-2006 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
- KS D 0035-1985 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
- KS D 0035-2011 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
- KS D 0410-2012 Method for determination of flow rate at elevated temperatures for powder mixed intended for warm compacting
- KS D 0410-2012(2022) Method for determination of flow rate at elevated temperatures for powder mixed intended for warm compacting
- KS D ISO 10070-2004(2019) Metallic powders－Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
German Institute for Standardization, Powder flow meter
- DIN EN ISO 8130-5:2021-10 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021); German version EN ISO 8130-5:2021
- DIN EN ISO 8130-5:2020 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO/DIS 8130-5:2020); German and English version prEN ISO 8130-5:2020
- DIN EN ISO 8130-11:2019-08 Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:2019); German version EN ISO 8130-11:2019
- DIN EN ISO 4490:2009 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2008); English version of DIN EN ISO 4490:2009-02
- DIN EN ISO 4490:2018-08 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2018); German version EN ISO 4490:2018
- DIN EN ISO 8130-15:2023-07 Coating powders - Part 15: Rheology (ISO 8130-15:2023); German and English version prEN ISO 8130-15:2023 / Note: Date of issue 2023-06-16
- DIN EN ISO 13517:2020 Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)
- DIN EN ISO 10070:2020-04 Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019); German version EN ISO 10070:2019
- DIN EN ISO 4490:2018 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2018)
- DIN EN ISO 13517:2020-08 Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020); German version EN ISO 13517:2020
- DIN EN ISO 8130-5:2021 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021); German version EN ISO 8130-5:2021
- DIN EN ISO 8130-11:2019 Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:2019)
ES-UNE, Powder flow meter
- UNE-EN ISO 8130-5:2022 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)
- UNE-EN ISO 8130-11:2020 Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:2019)
- UNE-EN ISO 4490:2018 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2018)
- UNE-EN ISO 10070:2020 Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019)
- UNE-EN ISO 13517:2021 Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)
National Metrological Verification Regulations of the People's Republic of China, Powder flow meter
Professional Standard - Non-ferrous Metal, Powder flow meter
- YS/T 963-2014 Determinator for electrical resistivity of granules of calcined coke
Henan Provincial Standard of the People's Republic of China, Powder flow meter
Professional Standard - Ferrous Metallurgy, Powder flow meter
- YB/T 5257-1993 F3701X (FT15) powder metallurgy high-speed tool steel technical conditions
Lithuanian Standards Office , Powder flow meter
- LST EN ISO 8130-5:2011 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:1992)
- LST EN ISO 8130-5:2021 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)
- LST EN ISO 4490:2008 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2008)
- LST EN ISO 8130-11:2011 Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:1997)
CH-SNV, Powder flow meter
- SN EN ISO 8130-5:2021 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)
AENOR, Powder flow meter
- UNE-EN ISO 8130-5:2011 Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:1992)
- UNE-EN ISO 13517:2014 Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2013)
- UNE-EN ISO 4490:2015 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2014)
- UNE-EN ISO 8130-11:2011 Coating powders. Part 11: Inclined-plane flow test (ISO 8130-11:1997)
ESDU - Engineering Sciences Data Unit, Powder flow meter
- ESDU 16002-2018 A Practical Guide to Turbulence and Flow Measurement by Thermal Anemometry (CTA)@ Laser-Doppler Anemometry (LDA) and Particle-Image Velocimetry (PIV) Part 2: Constant-Temperature Anemometry
- ESDU 17009-2018 A Practical Guide to Turbulence and Flow Measurement by Thermal Anemometry (CTA)@ Laser-Doppler Anemometry (LDA) and Particle-Image Velocimetry (PIV) Part 4: Particle-Image Velocimetry
- ESDU 17008-2018 A Practical Guide to Turbulence and Flow Measurement by Thermal Anemometry (CTA)@ Laser-Doppler Anemometry (LDA) and Particle-Image Velocimetry (PIV) Part 3: Laser-Doppler Anemometry
KR-KS, Powder flow meter
- KS D ISO 4490-2010 Metallic powders－Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
CENELEC - European Committee for Electrotechnical Standardization, Powder flow meter
- EN 50017:1994 Electrical Apparatus for Potentially Explosive Atmospheres Powder Filling ?Q?
- EN 50017:1998 "Electrical Apparatus for Potentially Explosive Atmospheres - Powder Filling ""q"""
- EN 50017:1977 Electrical Apparatus for Potentially Explosive Atmospheres: Powder Filling ?Q?
工业和信息化部/国家能源局, Powder flow meter
- JB/T 12964-2016 Milk and milk powder protein rapid tester
- JB/T 13068-2017 Technical specifications of powder metallurgy synchronizer gear hub for automobile transmission
- JB/T 5456-2016 Melt Flow Rate Meter Technical Specifications
Professional Standard - Traffic, Powder flow meter
- JT/T 569-2004 Water transport engineering.Acoustic current meter
- JT/T 570-2004 Water transport engineering.Propeller-type current meter
National Metrological Technical Specifications of the People's Republic of China, Powder flow meter
- JJF 1999-2022 Calibration Specification for Rotating Element Current Meters
PL-PKN, Powder flow meter
- PN-EN ISO 13517-2020-11 E Metallic powders -- Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)
Jilin Provincial Standard of the People's Republic of China, Powder flow meter
Professional Standard - Machinery, Powder flow meter
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Powder flow meter
TR-TSE, Powder flow meter
- TS 2237-1976 LIQUID FLOW MEASUREMENT ?N ?PEN CHANNELS— CUP — TYPE AND PROPELLER — TYPE CURRENT METERS
Professional Standard - Urban Construction, Powder flow meter
- CJ/T 3054.1-1995 Averaging speed flow meter for metering devices of water supply quantity
Military Standard of the People's Republic of China-General Armament Department, Powder flow meter
GOSTR, Powder flow meter
- GOST R 59094-2020 Requirements for arrangement of documents on technological processes for parts production by powder metallurgy method