ZH
RU
ES

How to measure inside metal

How to measure inside metal, Total:45 items.

In the international standard classification, How to measure inside metal involves: Jewellery, Corrosion of metals, Medical equipment, Fibre optic communications, Surface treatment and coating, Electricity. Magnetism. Electrical and magnetic measurements, Insulating materials, Electrical wires and cables, Magnetic materials.

Professional Standard - Light Industry, How to measure inside metal

QB/T 4888-2015 Geometric size measuring methods of precious metal jewellery and accessory

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to measure inside metal

GB/T 21198.1-2007 Determination of precious metals in precious metals jewellery alloys- Method using ICP spectrometry- Part 1: Platinum jewellery alloys- Determination of platinum-Method using a solution with yttrium as internal standard element
GB/T 21198.3-2007 Determination of precious metals in precious metals jewellery alloys.Method using ICP spectrometry.Part 3: Palladium jewellery alloys.Determination of palladium.Method using a solution with yttrium as internal standard element

Korean Agency for Technology and Standards (KATS), How to measure inside metal

KS D 0293-2009 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
KS P ISO 15142-3:2021 Implants for surgery — Metal intramedullary nailing systems — Part 3: Connection devices and reamer diameter measurements
KS P ISO 15142-3-2010(2016) Implants for surgery－Metal intramedullary nailing systems－Part 3：Connection devices and reamer diameter measurements
KS P ISO 15142-3:2010 Implants for surgery－Metal intramedullary nailing systems－Part 3：Connection devices and reamer diameter measurements
KS C IEC 61300-3-36:2002 Fibre optic interconnecting devices and passive components－Basic test and measurement procedures－Part 3－36：Examination and measurements－Measurement methods for the inside and outside diameters of fibre optic connector ferrules

European Committee for Standardization (CEN), How to measure inside metal

EN ISO 11844-3:2020 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2020)
EN ISO 11844-3:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006)

German Institute for Standardization, How to measure inside metal

DIN EN ISO 11844-3:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006); German version EN ISO 11844-3:2008
DIN EN ISO 11844-3:2020-06 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2020); German version EN ISO 11844-3:2020
DIN EN ISO 11844-3:2020 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2020)

Danish Standards Foundation, How to measure inside metal

DS/EN ISO 11844-3:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity
DS/EN 60404-6:2003 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
DS/EN IEC 60404-6:2021 Magnetic materials – Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens

Association Francaise de Normalisation, How to measure inside metal

NF A05-307-3*NF EN ISO 11844-3:2020 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3 : measurement of environmental parameters affecting indoor corrosivity
NF C93-903-36*NF EN 61300-3-36:2000 Fibre optic interconnecting devices and passives components - Basic test and measurement procedures - Part 3-36 : examinations and measurements - measurrement methods for the inside and outside diameters of fibre optic connector ferrules.
NF C32-011-605*NF EN 60811-605:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 605 : physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds
NF C28-906/A1:2021 Magnetic materials - Part 6 : methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
NF C28-906*NF EN IEC 60404-6:2018 Magnetic materials - Part 6 : methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens

International Organization for Standardization (ISO), How to measure inside metal

ISO 11844-3:2020 Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3: Measurement of environmental parameters affecting indoor corrosivity
ISO/CD 15142-3 Implants for surgery — Metal intramedullary nailing systems — Part 3: Connection devices and reamer diameter measurements
ISO 15142-3:2003 Implants for surgery - Metal intramedullary nailing systems - Part 3: Connection devices and reamer diameter measurements

ES-UNE, How to measure inside metal

UNE-EN ISO 11844-3:2020 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2020)
UNE-EN IEC 60404-6:2018/A1:2021 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...
UNE-EN IEC 60404-6:2018 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...
UNE-EN IEC 60404-6:2018/AC:2018-12 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...

KR-KS, How to measure inside metal

KS P ISO 15142-3-2021 Implants for surgery — Metal intramedullary nailing systems — Part 3: Connection devices and reamer diameter measurements

Lithuanian Standards Office , How to measure inside metal

LST EN ISO 11844-3:2008 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006)
LST EN 60404-6-2004 Magnetic materials. Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003)

AENOR, How to measure inside metal

UNE-EN ISO 11844-3:2009 Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006)
UNE-EN 60404-6:2004 Magnetic materials -- Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens

British Standards Institution (BSI), How to measure inside metal

18/30356657 DC BS EN ISO 11844-3. Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres. Part 3. Measurement of environmental parameters affecting indoor corrosivity
BS EN 61300-3-36:2000 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Examinations and measurements - Measurement methods for the inside and outside diameters of fibre optic connector ferrules
19/30377508 DC BS ISO 11119-9. Gas cylinders. Refillable composite gas cylinders and tubes. Design, construction and testing. Part 3. Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or...
20/30403973 DC BS EN 60404-6 AMD1. Magnetic materials. Part 6 Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens

Professional Standard - Medicine, How to measure inside metal

YY/T 0727.3-2009 Implants for surgery.Metal intramedullary nailing system.Part 3:Connection devices and reamer diameter measurements

American Society for Testing and Materials (ASTM), How to measure inside metal

ASTM B975-22 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B975-15 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)

International Electrotechnical Commission (IEC), How to measure inside metal

IEC 60404-6:2018+AMD1:2021 CSV Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specim
IEC 60404-6:2018 RLV Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specim
IEC 60811-605:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds
IEC 60404-6:2018/AMD1:2021 Amendment 1 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use

European Committee for Electrotechnical Standardization（CENELEC）, How to measure inside metal

EN IEC 60404-6:2018 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens