ZH

RU

ES

soil dryness

soil dryness, Total:323 items.

In the international standard classification, soil dryness involves: Soil quality. Pedology, Fuels, Non-metalliferous minerals, Earthworks. Excavations. Foundation construction. Underground works, Coals, Geology. Meteorology. Hydrology, Construction materials, Wastes, Metalliferous minerals, Chipless working equipment, Refractories, Electrical accessories, Fertilizers, Road engineering, Protection of and in buildings, Powder metallurgy, Ceramics, Vocabularies, Products of the chemical industry, Electrical wires and cables, Civil engineering in general.


RO-ASRO, soil dryness

  • STAS 7184/11-1979 SOILS Delennination o? dryness cocfficient
  • STAS 1914-1970 FOUNDATION SOILS Determination of density and of specific gravity of soils
  • STAS 1913/3-1976 FOUNDATION GROUND Determination of the soil density
  • STAS 6645/1-1990 Corrugated board. Bursting strength determination under dry state
  • STAS 6200/9-1992 Natural stones for buildings. Determination of wearing resistance through dry abrasion

Korean Agency for Technology and Standards (KATS), soil dryness

  • KS I ISO 15178:2009 Soil quality-Determination of total sulfur by dry combustion
  • KS I ISO 11272:2005 Soil quality-Determination of dry bluk density
  • KS I ISO 16720-2006(2011) Soil quality-Pretreatment of samples by freeze-drying for subsequent analysis
  • KS I ISO 11272-2005(2015) Soil quality-Determination of dry bluk density
  • KS I ISO 11272:2021 Soil quality ― Determination of dry bulk density
  • KS I ISO 11465:2005 Soil quality-Determination of dry matter and water contenton a mass basis-Gravimetric method
  • KS I ISO 15178-2009(2019) Soil quality-Determination of total sulfur by dry combustion
  • KS F 2330-2007 Testing methods for wetting and drying of compacted soil-cement mixtures
  • KS F 2330-1982 Testing methods for wetting and drying of compacted soil-cement mixtures
  • KS F 2595-2009 Standard test method for dry shrinkage crack in concrete
  • KS F 2595-2021 Standard test method for drying shrinkage crack in concrete
  • KS L 4004-1997(2017) Testing method for drying and firing shrinkages of ceramic whiteware clays
  • KS L 4004-1982 Testing method for drying and firing shrinkages of ceramic whiteware clays
  • KS L 4004-1987 Testing method for drying and firing shrinkages of ceramic whiteware clays
  • KS I ISO 16586-2009(2019) Soil quality-Determination of soil water content as a volume fraction on the basis of known dry bulk density-Gravimetric method
  • KS F 2308-2006 Test method for density of soil particles
  • KS F 2308-1986 Test method for density of soil particles
  • KS F 2330-2007(2017) Testing methods for wetting and drying of compacted soil-cement mixtures
  • KS F 2593-2009 Standard test method for bulk density of soil
  • KS F 2302-2017 Test method for particle size distribution of soils
  • KS F 2472-2019 Dry freezing-thawing testing method of product for the protection and repair of concrete structures
  • KS F 2472-2009 Dry freezing-thawing testing method of product for the protection and repair of concrete structures
  • KS L 4004-1997(2022) Testing method for drying and firing shrinkages of ceramic whiteware clays
  • KS F 2472-1986 Dry freezing-thawing testing method of product for the protection and repair of concrete structures

International Organization for Standardization (ISO), soil dryness

  • ISO 15178:2000 Soil quality - Determination of total sulfur by dry combustion
  • ISO 11272:1998 Soil quality - Determination of dry bulk density
  • ISO 11272:2017 Soil quality - Determination of dry bulk density
  • ISO 4974:2023 Soil quality — Guidance on soil temperature measurement
  • ISO 8558:1985 Aluminiumn ores; Preparation of pre-dried test samples
  • ISO 11465:1993 Soil quality; determination of dry matter and water content on a mass basis; gravimetric method
  • ISO 16586:2003/Cor 1:2009 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method; Technical Corrigendum 1
  • ISO/CD 18386 Soil quality — Screening method for soil temperature — Measurement by IR thermometer
  • ISO 11465:1993/Cor 1:1994 Soil quality; determination of dry matter and water content on a mass basis; gravimetric method; technical corrigendum 1
  • ISO 13758:1996 Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method

Standard Association of Australia (SAA), soil dryness

  • AS 1289.2.1.1:2005 Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Oven drying method (standard method)
  • AS 1289.2.1.6:2005 Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Hotplate drying method
  • AS 1289.2.1.4:2005 Methods of testing soils for engineering purposes - Soil moisture content tests - Determination of the moisture content of a soil - Microwave-oven drying method (subsidiary method)
  • AS 1289.5.3.5:1997(R2013)
  • AS 1289.5.3.5:1997 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method
  • AS 4969.1:2008 Analysis of acid sulfate soil - Dried samples - Methods of test - Pre-treatment of samples
  • AS 4969.2:2008 Analysis of acid sulfate soil - Dried samples - Methods of test - Determination of pHKCl and titratable actual acidity (TAA)
  • AS 4969.9:2008 Analysis of acid sulfate soil - Dried samples - Methods of test - Calculation of titratable sulfidic acidity (TSA)
  • AS 4969.14:2009
  • AS 4969.12:2009
  • AS 1289.6.2.1:2001(R2013)
  • AS 4969.7:2008 Analysis of acid sulfate soil - Dried samples - Methods of test - Determination of chromium reducible sulfur (SCR)
  • AS 1289.6.2.1:2001 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the shear strength of a soil
  • AS 4969.6:2008 Analysis of acid sulfate soil - Dried samples - Methods of test - Determination of acid extractable sulfur in soil residue after peroxide oxidation (SRAS)
  • AS 1289.5.4.1:2007 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
  • AS 1289.5.4.1:2007(R2016) Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
  • AS 1289.6.1.3:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard field-in-place method
  • AS 1289.5.4.2:2007 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Assignment of maximum dry density and optimum moisture content values
  • AS 1289.5.4.2:2007(R2016) Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Assignment of maximum dry density and optimum moisture content values
  • AS 1289.6.9.1:2000 Methods of testing soils for engineering purposes - Soil strength and consolidation test Determination of stiffness of soil
  • AS 1289.6.3.3:1997 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Perth sand penetrometer test
  • AS 4969.0:2008 Analysis of acid sulfate soil - Dried samples - Methods of test - Introduction and definitions, symbols and acronyms
  • AS 4969.13:2009
  • AS 1289.6.7.2:2001/Amdt 1:2003
  • AS 1289.6.7.1:2001(R2013)
  • AS 1289.6.6.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the one-dimensional consolidation properties of a soil - Standard method
  • AS 1289.5.3.2:2004 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the field dry density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer
  • AS 1289.5.5.1:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method
  • AS 1289.6.2.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of shear strength of a soil - Direct shear test using a shear box
  • AS 1289.6.3.2:1997 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - 9kg dynamic cone penetrometer test
  • AS 1289.6.3.3:1997/Amdt No. 1:1999
  • AS 4969.5:2008 Analysis of acid sulfate soil - Dried samples - Methods of test - Determination of peroxide sulfur (SP), calcium (CaP) and magnesium (MgP)
  • AS 4969.11:2008 Analysis of acid sulfate soil - Dried samples - Methods of test - Calculation of net acid-soluble sulfur (SNAS), calcium (CaNAS) and magnesium (MgNAS)
  • AS 1289.6.1.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for a remoulded specimen
  • AS 1289.6.3.3:1997(R2013)
  • AS 1289.5.4.3:2006 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio and moisture ratio using statistical selection of reference values
  • AS 4969.8:2008 Analysis of acid sulfate soil - Dried samples - Methods of test - Determination of hydrochloric acid extractable sulfur (SHCl), calcium (CaHCl) and magnesium (MgHCl)
  • AS 4969.4:2008 Analysis of acid sulfate soil - Dried samples - Methods of test - Determination of 1 M potassium chloride extractable sulfur (SKCl), calcium (CaKCl) and magnesium (MgKCl)
  • AS 1289.6.7.3:1999 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method using a flexible wall permeameter
  • AS 1289.6.1.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for an undisturbed specimen
  • AS 1289.3.5.1:1995 Methods of testing soils for engineering purposes Method 3.5.1: Soil classification tests-Determination of the soil particle density of a soil-Standard method
  • AS 1289.6.7.1:2001 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of permeability of a soil
  • AS 1289.3.6.1:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving
  • AS 1289.3.6.1:2009

IN-BIS, soil dryness

Indonesia Standards, soil dryness

  • SNI 13-6622-2001 Determination for fiber content of peat or dried non-peat organic soils
  • SNI 1975-2012 Method for preparation of dry sampling of soils and soils contain with aggregates
  • SNI 1742-2008 Testing methods for light solidity of soils
  • SNI 3423-2008 Testing methods for analysis of grain soils size

Professional Standard - Building Materials, soil dryness

British Standards Institution (BSI), soil dryness

  • PD CEN/TS 17693-2:2021 Earthworks. Soil treatment tests. Test of evaluation of the aptitude of a dry material to emit dust
  • BS 7529:1991 Specification for desiccant activated clay
  • BS 7755-5.6:1999 Soil quality - Physical methods - Determination of dry bulk density
  • BS 5838:2022 Dry prepacked concrete. Specification
  • BS EN ISO 11272:2017 Tracked Changes. Soil quality. Determination of dry bulk density
  • BS EN 992:1996 Determination of the dry density of lightweight aggregate concrete with open structure
  • BS ISO 4974:2023 Soil quality. Guidance on soil temperature measurement
  • 22/30436148 DC BS ISO 4974. Soil quality. Guidance on soil temperature measurement
  • BS EN ISO 16720:2008 Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis
  • BS 3482-10:1991 Methods of test for desiccants - Determination of bulk density (dry basis)
  • BS IEC 60853-3:2002 Calculation of the cyclic and emergency current rating of cables - Cyclic rating factor for cables of all voltages, with partial drying of the soil
  • BS 3482-7:1991 Methods of test for desiccants - Determination of particle size

European Committee for Standardization (CEN), soil dryness

  • EN ISO 16720:2007 Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis
  • FprCEN/TS 17693-2-2021 Earthworks - Soil treatment tests - Part 2: Test of evaluation of the aptitude of a dry material to emit dust
  • CEN/TS 17693-2:2021 Earthworks - Soil treatment tests - Part 2: Test of evaluation of the aptitude of a dry material to emit dust
  • EN ISO 11272:2014 Soil quality - Determination of dry bulk density (ISO 11272:1998)
  • EN 15936:2012 Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion
  • EN ISO 11272:2017 Soil quality - Determination of dry bulk density
  • EN 680:2005 Determination of the drying shrinkage of autoclaved aerated concrete
  • EN 680:1993 Determination of the Drying Shrinkage of Autoclaved Aerated Concrete
  • prEN 680-1992 Determination of the drying shrinkage of autoclaved aerated concrete
  • EN ISO 11276:2014 Soil quality - Determination of pore water pressure - Tensiometer method
  • BS EN ISO 16720:2007 Freeze-drying method for sample pretreatment for continuous soil analysis
  • EN ISO 13758:1996 Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996)

German Institute for Standardization, soil dryness

  • DIN EN ISO 16720:2007 Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis (ISO 16720:2005); English version of DIN EN ISO 16720:2007-06
  • DIN EN ISO 11272:2014 Soil quality - Determination of dry bulk density (ISO 11272:1998); German version EN ISO 11272:2014
  • DIN EN ISO 16720:2007-06 Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis (ISO 16720:2005); German version EN ISO 16720:2007
  • DIN CEN/TS 17693-2:2022-02 Earthworks - Soil treatment tests - Part 2: Test of evaluation of the aptitude of a dry material to emit dust; German version CEN/TS 17693-2:2021
  • DIN EN 12049:1996 Solid fertilizers and liming material - Determination of moisture content - Gravimetric method by drying under reduced pressure (ISO 8189:1992, modified); German version EN 12049:1996
  • DIN EN 12048:1996 Solid fertilizers and liming material - Determination of moisture content - Gravimetric method by drying at (105 ˝ 2)°C (ISO 8190:1992, modified); German version EN 12048:1996
  • DIN ISO 15178:2001-02 Soil quality - Determination of total sulfur by dry combustion (ISO 15178:2000)
  • DIN EN 680:2006-03 Determination of the drying shrinkage of autoclaved aerated concrete; German version EN 680:2005
  • DIN ISO 15178:2001 Soil quality - Determination of total sulfur by dry combustion (ISO 15178:2000)
  • DIN EN ISO 11272:2017-07 Soil quality - Determination of dry bulk density (ISO 11272:2017); German version EN ISO 11272:2017
  • DIN ISO 16586:2012-05 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method (ISO 16586:2003 + Cor. 1:2009)
  • DIN 19682-5:2007-11 Soil quality - Field tests - Part 5: Determination of soil moisture
  • DIN 18126:2022-10 Soil, investigation and testing - Determination of density of non cohesive soils for maximum and minimum compactness
  • DIN 18125-2:1999 Soil investigation and testing - Determination of density of soil - Part 2: Field tests
  • DIN 19672-1:1968-04 Apparatus for drawing soil samples in agricultural engineering; apparatus for soil sampling in undisturbed situation
  • DIN EN ISO 11276:2014 Soil quality - Determination of pore water pressure - Tensiometer method (ISO 11276:1995), German version EN ISO 11276:2014
  • DIN ISO 11276:2001 Soil quality - Determination of pore water pressure - Tensiometer methods (ISO 11276:1995)
  • DIN 18125-2:2011 Soil investigation and testing - Determination of density of soil - Part 2: Field tests
  • DIN 18125-2:2020 Soil, investigation and testing - Determination of density of soil - Part 2: Field tests
  • DIN 18125-2:2020-11 Soil, investigation and testing - Determination of density of soil - Part 2: Field tests

KR-KS, soil dryness

VN-TCVN, soil dryness

  • TCVN 4048-2011 Soil quality.Determination of humudity and absolute dryness coefficient
  • TCVN 6806-2001 Aluminium ores.Preparation of pre-dried test samples

PT-IPQ, soil dryness

Association Francaise de Normalisation, soil dryness

  • NF EN ISO 19496-1:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
  • NF EN 60966-2-6:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
  • NF EN ISO 6789-2:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
  • NF EN ISO 16890-3:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
  • NF EN ISO 19496-2:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
  • NF EN ISO 16890-1:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
  • NF EN 62053-11/A1:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
  • NF EN 62052-31:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
  • NF EN ISO 11272:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
  • NF EN ISO 6789-1:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
  • NF EN 60794-2-22:2017 Qualité du sol - Détermination de la masse volumique apparente sèche
  • NF X31-160:1993 SOIL QUALITY. DETERMINATION OF PHOSPHORUS SOLUBLE IN A 20 G.L-1 MONOHYDRIC CITRIC ACID SOLUTION. DYER METHOD.
  • XP P94-515-2*XP CEN/TS 17693-2:2022 Earthworks - Soil treatment tests - Part 2 : test of evaluation of the aptitude of a dry material to emit dust
  • XP CEN/TS 17693-2:2022 Terrassements - Essais de traitement de sol - Partie 2 : essai d'évaluation de l'aptitude d'un matériau sec à émettre de la poussière
  • NF EN ISO 16720:2007 Qualité du sol - Prétraitement des échantillons par lyophilisation pour analyse subséquente
  • NF X31-556*NF EN ISO 11272:2017 Soil quality - Determination of dry bulk density
  • NF P94-050:1995 Soils : investigation and testing. Determination of moisture content. Oven drying method.
  • NF P94-049-1:1996 Sols : reconnaissance et essais - Détermination de la teneur en eau pondérale des matériaux - Partie 1 : méthode de la dessiccation au four à micro-ondes.
  • NF EN 12049:1997 Engrais solides et amendements calciques et/ou magnésiens - Détermination de la teneur en eau - Méthode gravimétrique par séchage sous pression réduite.
  • NF ISO 15178:2001 Qualité du sol - Dosage du soufre total par combustion sèche
  • NF EN ISO 1666:1998 Amidon et fécule - Détermination de l'humidité - Méthode par séchage à l'étuve.
  • NF ISO 16586:2003 Qualité du sol - Détermination de la teneur en eau volumique du sol à partir de la masse volumique apparente sèche connue - Méthode gravimétrique
  • NF EN 680:2006 Détermination du retrait de séchage du béton cellulaire autoclavé
  • XP P94-060-1:1997 Sols : reconnaissance et essais - Essai de dessiccation - Partie 1 : détermination conventionnelle de la limite de retrait sur le passant à 400 micromètres d'un matériau.
  • NF P94-064:1993 Sols : reconnaissance et essais - Masse volumique sèche d'un élément de roche - Méthode par pesée hydrostatique.
  • NF X31-560:2007 Qualité des sols - Cartographie des sols appliquée à toutes les échelles - Acquisition et gestion informatique de données pédologiques en vue de leur utilisation en cartographie des sols
  • NF P19-107:1994 Determination of the drying shrinkage of autoclaved aerated concrete.
  • NF P19-107*NF EN 680:2006 Determination of the drying shrinkage of autoclaved aerated concrete.
  • NF X31-436*NF EN ISO 16720:2007 Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis
  • NF X31-507:1993 Qualité des sols - Évaluation de la masse volumique apparente d'un sol - Méthode par transmission d'un rayonnement gamma.
  • NF EN ISO 1741:1994 Dextrose cristallisé - Détermination de la perte de masse à la dessiccation - Méthode par étuvage sous pression réduite.
  • NF P94-054:1991 Soils : investigation and testing. Determination of particle density. Pycnometer method.
  • NF EN ISO 17402:2011 Qualité du sol - Lignes directrices pour la sélection et l'application des méthodes d'évaluation de la biodisponibilité des contaminants dans le sol et les matériaux du sol

Professional Standard - Energy, soil dryness

  • NB/T 10737-2021 Calculation Method of Drying Strength of Coal Slime Drying System

RU-GOST R, soil dryness

  • GOST ISO 16720-2018 Soil quality. Pretreatment of samples by freeze-drying for subsequent analysis
  • GOST 3594.6-1993 Moulding refractory clays. Method for the determination of compression strength limit in dry state
  • GOST R 53219-2008 Soil quality. Determination of nitrogen in air-dry soils using calcium chloride solution
  • GOST 26262-2014 Soils. Soils field methods for determining depth of thawing
  • GOST EN 15928-2013 Fertilizers. Determination of the fineness of grinding (dry method)
  • GOST 25358-1982 Soils. Field method of determining temperature
  • GOST 25358-2012 Soils. Field method of determining temperature
  • GOST R 53582-2009 Soils. Method of determination of thawing soil shear resistance
  • GOST ISO 13758-2013 Liquefied petroleum gases. Assessment of dryness of propane. Valve freeze method

Qinghai Provincial Standard of the People's Republic of China, soil dryness

NZ-SNZ, soil dryness

  • NZS 4402.4.2.2:1988 Methods of Testing soils for Civil Engineering Purposes Part 4.2: Soil Compaction Tests - Determination of the Minimum and Maximum Dry Densities and Relative Density of a Cohesionless Soil Test 4.2.2: Maximum Dry Density
  • NZS 4402.4.2.1:1988 Methods of Testing Soils for Civil Engineering Purposes Part 4.2: Soil Compaction Tests - Determination of the Minimum and Maximum Dry Densities and Relative Density of a Cohesionless Soil Test 4.2.1: Minimum Dry Density
  • NZS 4402.4.2.3:1988 Methods of Testing Soils for Civil Engineering Purposes Part 4.2: Soil Compaction Tests - Determination of the Minimum and Maximum Dry Densities and Relative Density of a Cohesionless Soil Test 4.2.3: Relative Density
  • NZS 4402.2.8.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2.8: Soil Classification Tests - Determination of the Particle-Size Distribution Test 2.8.2: Subsidiary Method by Dry Sieving
  • NZS 4402.5.1.4:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.4: Immersion in Water Method
  • NZS 4402.5.1.5:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.5: Water Displacement Method
  • NZS 4402.5.1.3:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Sensity of Soil Test 5.1.3: Sampling Tube Method for the Determination of the In Situ Density
  • NZS 4402.5.1.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.1: Sand Replacement Method for the Determination of the In Situ Density
  • NZS 4402.5.1.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 5.1: Soil Density Tests - Determination of the Density of Soil Test 5.1.2: Balloon Densometer Method for the Determination of the In Situ Density
  • NZS 4402.4.1.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 4.1: Soil Compaction Test - Determination of the Dry Density/Water Content Relationship Test 4.1.1: New Zealand Standard Compaction Test
  • NZS 4402.4.1.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 4.1: Soil Compaction Tests - Determination of the Dry Density/Water Content Relationship Test 4.1.2: New Zealand Heavy Compaction Test
  • NZS 4402.4.1.3:1986 Methods of Testing Soils for Civil Engineering Purposes Part 4.1: Soil Compaction Tests - Determination of the Dry Density/Water Content Relationship Test 4.1.3: New Zealand Vibrating Hammer Compaction Test
  • NZS 4402.2.7.2:1986 Methods of Testing Soils for Civil Engineering Purposes Part 2: Soil Classification Tests - Determination of the Solid Density of Soil Particles Test 2.7.2: Method for Medium and Fine Soils

PL-PKN, soil dryness

未注明发布机构, soil dryness

  • BS 7529:1991(1999) Specification for Desiccant activated clay
  • BS EN ISO 16720:2007(2008) Soil quality — Pretreatment of samples by freeze - drying for subsequent analysis
  • BS 3482-10:1991(1999) Methods of test for Desiccants — Part 10 : Determination of bulk density (dry basis)
  • BS ISO 17924:2018(2022) Soil quality — Assessment of human exposure from ingestion of soil and soil material — Procedure for the estimation of the human bioaccessibility / bioavailability of metals in soil

NL-NEN, soil dryness

  • NEN 5748-1990 Soil - Determination of moisture content and dry matter content of air-dry soil
  • NEN 5747-1990 Soil - Determination of moisture content and dry matter content of not prepared soil
  • NEN-EN 747-1-1993 Furniture. Bunk bed for domestic use. Part 1: Safety requirements
  • NEN-EN 680-1994 Determination of the drying shrinkage of autoclaved aerated concrete
  • NEN 5168-1990 Geotextile Determination of the characteristic pore size in dry condition

AT-ON, soil dryness

  • ONORM EN 678-1994 Determination of the dry density of autoclaved aerated concrete
  • ONORM L 1068-1988 Physical investigations ofsoil; determination ofsoil density
  • ONORM L 1095-2002 Chemical analyses of soils - Determination of total nitrogen by dry combustion
  • ONORM L 1080-1999 Chemical analyses of soils - Determination of organic carbon by dry combustion
  • ONORM EN 680-1994 Determination of the drying shrinkage of autoclaved aerated concrete

Danish Standards Foundation, soil dryness

  • DS/EN ISO 16720:2007 Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis
  • DS/ISO 15178:2004 Soil quality - Determination of total sulfur by dry combustion
  • DS/ISO 16586/Corr. 1:2009 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
  • DS/ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
  • DS/EN 680:1994 Determination of the drying shrinkage of autoclaved aerated concrete

Lithuanian Standards Office , soil dryness

  • LST EN ISO 16720:2007 Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis (ISO 16720:2005)
  • LST 1360.6-1995 Soils for road construction. Testing methods. Determination of density of soil

AENOR, soil dryness

  • UNE-EN ISO 16720:2007 Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis (ISO 16720:2005)
  • UNE 77327:2003 Soil quality -- Determination of dry bulk density.

Sichuan Provincial Standard of the People's Republic of China, soil dryness

CZ-CSN, soil dryness

American Society for Testing and Materials (ASTM), soil dryness

  • ASTM D421-85(2002) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
  • ASTM D421-85(1998) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
  • ASTM C426-99 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM C426-05 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM C426-16 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM C426-15 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM C426-15e1 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM C387/C387M-06a Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
  • ASTM C387/C387M-08 Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
  • ASTM C387/C387M-09 Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
  • ASTM C387/C387M-17 Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
  • ASTM C387/C387M-23 Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
  • ASTM C1480-00(2005) Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
  • ASTM C1480/C1480M-07(2012) Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
  • ASTM C387/C387M-15 Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
  • ASTM D7382-08 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
  • ASTM C426-22 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM C426-23 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM D421-85(2007) Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
  • ASTM C387/C387M-11a Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
  • ASTM C326-09(2014) Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
  • ASTM D7382-07 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer

Professional Standard - Agriculture, soil dryness

HU-MSZT, soil dryness

ES-AENOR, soil dryness

CU-NC, soil dryness

  • NC 44-31-1986 Ores. Dried and Natrified Bentonite. Quality Specifications

ES-UNE, soil dryness

  • UNE-EN ISO 11272:2017 Soil quality - Determination of dry bulk density (ISO 11272:2017) (Endorsed by Asociación Española de Normalización in May of 2017.)

United States Navy, soil dryness

Professional Standard - Forestry, soil dryness

YU-JUS, soil dryness

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, soil dryness

  • GB/T 11972-1997 Test methods for dry shrinkage of aerated concrete
  • GB/T 3257.22-1999 Methods for chemical analysis of bauxite--Preparation of pre-dried test samples

SE-SIS, soil dryness

Xinjiang Provincial Standard of the People's Republic of China, soil dryness

U.S. Military Regulations and Norms, soil dryness

国家市场监督管理总局、中国国家标准化管理委员会, soil dryness

  • GB/T 36747-2018 Design specification for conservation and reinforcement of earthen site in arid environment

IT-UNI, soil dryness

Japanese Industrial Standards Committee (JISC), soil dryness

TH-TISI, soil dryness

  • TIS 110-1974 Standard method of test for drying shrinkage of concrete block

国家文物局, soil dryness

  • WW/T 0038-2012 Design specifications for protection and reinforcement projects of dry earthen sites

The American Road & Transportation Builders Association, soil dryness

  • AASHTO R 58-2011 Standard Practice for Dry Preparation of Disturbed Soil and Soil-Aggregate Samples for Test

AASHTO - American Association of State Highway and Transportation Officials, soil dryness

  • R 58-2011 Standard Practice for Dry Preparation of Disturbed Soil and Soil-Aggregate Samples for Test
  • T87-1986 Standard Method of Test for Dry Preparation of Disturbed Soil and Soil Aggregate Samples for Test (Twentieth Edition)

国家林业和草原局, soil dryness

  • LY/T 3180-2020 Technical Regulations for Soil Remediation of Degraded Forest Land in Arid Hot and Dry Valley Areas

Taiwan Provincial Standard of the People's Republic of China, soil dryness

Professional Standard - Environmental Protection, soil dryness

  • HJ 613-2011 Soil.Determination of dry matter and water content.Gravimetric method

GOSTR, soil dryness

Group Standards of the People's Republic of China, soil dryness

  • T/SSESB 3-2022 Soil and sediment — The Technical specification for sample pretreatment by freeze-drying method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., soil dryness

  • ASHRAE 4590-2002 Thermal Performance of the Subsoil Environment in a Dry Desert Climate

CH-SNV, soil dryness

BR-ABNT, soil dryness

Professional Standard - Meteorology, soil dryness

BE-NBN, soil dryness

  • NBN EN 680-1994 Determination of the drying shrinkage of autoclaved aerated concrete
  • NBN-EN ISO 1666:1994 Starch - Determination of moisture content - Oven-drying methods (ISO 1666:1973)

BELST, soil dryness

  • STB 1534-2005 Dry concrete mixtures on a cement without shrinkage. Specifications

Professional Standard - Non-ferrous Metal, soil dryness

  • YS/T 575.20-2006 Preparation of pre-dried samples for chemical analysis of bauxite ores

European Association of Aerospace Industries, soil dryness

  • AECMA PREN 3032-1992 Aerospace Series Test Method for Dry Film Lubricants Thickness Measurement Edition 1




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved