ZH
RU
ES

Test method for elastic modulus of composite materials

Test method for elastic modulus of composite materials, Total:467 items.

In the international standard classification, Test method for elastic modulus of composite materials involves: Materials for the reinforcement of composites, Ceramics, Reinforced plastics, Materials for aerospace construction, Road vehicles in general, Testing of metals, Glass, Cellular materials, Wood-based panels, Waxes, bituminous materials and other petroleum products, Road engineering, Dentistry, Mining and quarrying, Construction materials, Packaging machinery, Seals, glands, Inorganic chemicals, Rubber and plastics products, Conducting materials, Mechanical testing, Analytical chemistry, Products of the textile industry, Footwear, Technical drawings, Plastics, Raw materials for rubber and plastics, Refractories, Non-textile floor coverings, Magnetic materials, Protection against fire, Semi-manufactures of timber, Wood, sawlogs and sawn timber, Insulating materials, Electrical and electronic testing, Road vehicle systems, Paints and varnishes, Structures of buildings, Installations in buildings, Environmental testing, Adhesives, Rubber, Furniture, Thermodynamics and temperature measurements, Electrical wires and cables, Test conditions and procedures in general, Insulating fluids, Electricity. Magnetism. Electrical and magnetic measurements, Wastes, Organic chemicals, Printed circuits and boards, Textile fibres, Aids for disabled or handicapped persons, Soil quality. Pedology.

Japanese Industrial Standards Committee (JISC), Test method for elastic modulus of composite materials

JIS R 1644:2002 Testing methods for elastic modulus of continuous fiber-reinforced ceramic matrix composites
JIS C 3660-2-1:1998 Common test methods for insulating and sheathing materials of electric cables -- Part 2: Method specific to elastomeric compounds -- Section 1: Ozone resistance test -- Hot set test -- Mineral oil immersion test
JIS C 3660-2-1:2003 Common test methods for insulating and sheathing materials of electric and optical cables -- Part 2-1: Methods specific to elastomeric compounds -- Ozone resistance, hot set and mineral oil immersion tests
JIS R 1656:2003 Testing methods for tensile stress-strain behavior of continuous fiber reinforced ceramic matrix composites at room temperature
JIS C 3660-3-2:1998 Common test methods for insulating and sheathing materials of electric cables -- Part 3: Methods specific to PVC compounds -- Section 2: Loss of mass test -- Thermal stability test
JIS R 1722:2015 Testing method for fatigue behavior of continuous fiber-reinforced ceramic composites at room temperature under constant amplitude

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test method for elastic modulus of composite materials

GB/T 32376-2015 Elastic constants test method for fibre reinforced composites
GB/T 32497-2016 Test method of ballistic resistance against fragment simulating projectiles for fiber-reinforced composites.V50 method
GB/T 43112-2023 Rate jump method for measuring elastic modulus of metallic materials
GB/T 22315-2008 Metallic materials.Determination of modulus of elasticity and Poisson's ratio
GB/T 29895-2013 Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration
GB/T 14453-1993 Metallic materials. Standard test method for the elastic modulus at high temperature. The method of disc. Vibrator
GB 5594.2-1985 Test method for performance of structural ceramic materials for electronic components Test method for Young's modulus of elasticity and Poisson's ratio
GB/T 5594.2-1985 Test methods for properties of structure ceramic used in electronic components--Test method for Young's elastic modulus and Poisson ratio
GB/T 32493-2016 Test method of ballistic resistance for fibre reinforced composites.Specific absorbed energy by perforation method
GB/T 13477.17-2002 Test method for building sealants Part 17: Determination of elastic recovery
GB/T 41762.2-2022 Fibre-reinforced plastic composites—Determination of laminate through-thickness properties—Part 2:Determination of the elastic modulus,the strength and the Weibull size effects by flexural test of uni
GB/T 1927.13-2022 Test methods for physical and mechanical properties of small clear wood specimens—Part 13:Determination of the modulus of elasticity in compression perpendicular to grain

GOSTR, Test method for elastic modulus of composite materials

GOST R 57864-2017 Polymer composites. Test method for determination of through-thickness flatwise tensile strength and elastic modulus
GOST R 57152-2016 Polymer composites. Method for determination of highly elastic and relaxation characteristics of organic glasses
GOST R 57859-2017 Polymer composites. Test method for determining resistance of synthetic polymeric materials to fungi
GOST R 58023-2017 Composite nanomaterials. Thermoplastic polymers modified by nanosilicates. Parameters and test methods

SE-SIS, Test method for elastic modulus of composite materials

SIS 20 03 11

American Society for Testing and Materials (ASTM), Test method for elastic modulus of composite materials

ASTM D8101/D8101M-17 Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile
ASTM D8101/D8101M-18 Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile
ASTM D6084/D6084M-18 Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer
ASTM D7291/D7291M-15 Standard Test Method for Through-Thickness &x201c;Flatwise&x201d; Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D7291/D7291M-22 Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM F806-99a Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
ASTM C747-93(2005) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM D6084-06 Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer
ASTM D6084-04 Standard Test Method for Elastic Recovery of Bituminuous Materials by Ductilometer
ASTM D3171-11 Standard Test Methods for Constituent Content of Composite Materials
ASTM D7291/D7291M-07 Standard Test Method for Through-Thickness "Flatwise" Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D7369-09 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
ASTM D7369-20 Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test
ASTM D6084-97 Standard Test Method for Elastic Recovery of bituminuous Materials by Ductilometer
ASTM D6084/D6084M-21 Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer
ASTM F806-99a(2003)e1 Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
ASTM D7499/D7499M-09(2023) Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness
ASTM D8019-15 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets
ASTM D7369-11 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
ASTM C747-23 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM C747-93(1998) Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM C747-16 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM D7426-08(2013) Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound
ASTM D7426-08 Standard Test Method for Assignment of the DSC Procedure for Determining T_g of a Polymer or an Elastomeric Compound
ASTM D4574-94(1998) Standard Test Methods for Rubber Chemicals-Determination of Ash Content
ASTM D4574-06(2021) Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content
ASTM D4574-22 Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content
ASTM D7332/D7332M-07e1 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM D4574-06(2017) Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content
ASTM D7905/D7905M-19 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D7905/D7905M-19e1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D6671/D6671M-13 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM C885-87(2002) Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
ASTM C885-87(2007) Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
ASTM C885-87(2007)e1 Standard Test Method for Young''s Modulus of Refractory Shapes by Sonic Resonance
ASTM D4571-21 Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material
ASTM D4571-22 Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material
ASTM C613/C613M-97(2003)e1 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
ASTM C613/C613M-97(2008) Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
ASTM C613M-97(2008)e1 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
ASTM C613-97(2008)e2 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
ASTM D5528-13 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D4571-06(2017) Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material
ASTM F1514-03(2013) Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
ASTM D5376-06(2021) Standard Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ
ASTM D7078/D7078M-12 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D5379/D5379M-05 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM D5379/D5379M-98 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM D5379/D5379M-19e1 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM D5379/D5379M-19 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM D5379/D5379M-12 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM D537-85(1997) Standard test method for determination of shear properties of composite materials by the V-notched beam method
ASTM D6641/D6641M-14 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D7136/D7136M-15 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D6264/D6264M-07 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM D6415-99e1 Standard Test Method for Measuring the Curved Beam Stength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6264/D6264M-12 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-06a(2013) Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6671/D6671M-22 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM D6671/D6671M-13e1 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM E1922-04(2015) Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM D3410/D3410M-16 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D6415/D6415M-06ae1 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D6415/D6415M-06 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D7078/D7078M-05 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM C1341-13(2023) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM D7552-22 Standard Test Method for Determining the Complex Shear Modulus (G*) of Asphalt Mixtures Using Dynamic Shear Rheometer
ASTM D7136/D7136M-20 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM F1515-98 Standard Test Method for Measuring Light Stability of Resilient Vinyl Flooring by Color Change
ASTM F1515-03 Standard Test Method for Measuring Light Stability of Resilient Vinyl Flooring by Color Change
ASTM D7136/D7136M-07 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D7136/D7136M-12 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D7332/D7332M-23 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM D6671/D6671M-19 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM D6641/D6641M-16 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D6641/D6641M-16e2 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D6641/D6641M-16e1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D4093-95 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D4255/D4255M-20 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM C1523-02 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
ASTM C1523-17 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
ASTM D5467/D5467M-97e1 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D5467/D5467M-97(2017) Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
ASTM D6264/D6264M-23 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM F1550-10 Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter
ASTM C1897-20 Standard Test Methods for Measuring the Reactivity of Supplementary Cementitious Materials by Isothermal Calorimetry and Bound Water Measurements
ASTM D7332/D7332M-09 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM D7332/D7332M-07 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM D7332/D7332M-22 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM D7332/D7332M-16 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM D7332/D7332M-15 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM D7332/D7332M-15a Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM C1702-15a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM C1702-23 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM D4075-02 Standard Test Methods for Compounding Materials-Flame Atomic Absorption Technique-Determination of Metals
ASTM D8356-20 Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio
ASTM F1550-00 Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calori
ASTM F1550-01 Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calori
ASTM E2058-01 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E2058-02a Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E2058-00 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E2058-02 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E2058-06 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM D5376-06(2017) Standard Test Method for Rubber Compounding Materials&x2014;Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ
ASTM D4093-23 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D7552-09 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
ASTM D6641/D6641M-01e1 Standard Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture
ASTM D4093-95(2001)e1 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D4093-95(2014) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM E2058-03 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM C1702-13a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM D3410/D3410M-03(2008) Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D7905/D7905M-14 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D6641/D6641M-09 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM C1702-13 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM E1740-10 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM D6264/D6264M-17 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM E2058-09 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM D5856-95(2007) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D5856-95(2002) Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D5856-95(2002)e1 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D5856-95 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM D7136/D7136M-05e1 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D7136/D7136M-05 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D5856-15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
ASTM C580-18(2023) Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM E2058-13 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E1474-21 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM E1474-22 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM E1740-20a Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM E1740-09 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E1740-20 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM E1740-22 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM E1740-15 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM D7616/D7616M-11 Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
ASTM F1550-05 Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter
ASTM D7616/D7616M-11(2017) Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures

CZ-CSN, Test method for elastic modulus of composite materials

CSN 34 6311-1984 Testing of ceramic elektrolochtiic mulo rials. Methods of determination of tin; elasticity modulus
CSN 72 5019-1982 Testing of ceramic electrotechnlc materials. Methods of the modulus of rigidity

Group Standards of the People's Republic of China, Test method for elastic modulus of composite materials

T/CSAE 170-2020 Test methods for mechanical properties of adhesively bonded joints for automotive polymer matrix composites—Composite/composite
T/CSAE 171-2020 Test methodsfor mechanical properties of adhesively bonded joints for automotive polymer matrix composites—Composite/metal
T/SDAMA 001-2022 Test method of frequency dielectric properties of inorganic filler for high frequency composite dielectric substrate
T/CAAMTB 90-2022 Performance requirements and test methods of aluminum matrix composite brake discs for electric passenger vehicles
T/CSTM 00484-2022 Test method for in-plane shear properties of fiber reinforced polymer matrix composites laminatesby the ± 45° laminate stretching method

Professional Standard - Aviation, Test method for elastic modulus of composite materials

HB 5367.11-1986 Test method for modulus of elasticity of carbon graphite sealing materials
HB 7736.5-2004 Test method for physical properties of composite material prepreg Part 5:Determination of resin content
HB 7736.4-2004 Test method for physical properties of composite material prepreg Part 4:Determination of volatiles content
HB 7736.8-2004 Test method for physical properties of composite material prepreg Part 8:Determination of tack
HB 7736.2-2004 Test method for physical properties of composite material prepreg Part 2:Determination of mass per unit area
HB 7736.7-2004 Test method for physical properties of composite material prepreg Part 7:Determination of gel time
HB 7736.3-2004 Test method for physical properties of composite material prepreg Part 3:Determination of fiber mass per unit area
HB 7736.6-2004 Test method for physical properties of composite material prepreg Part 6:Determination of resin flow

The American Road & Transportation Builders Association, Test method for elastic modulus of composite materials

AASHTO T 307-1999(R2007) Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
AASHTO T307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials Twentieth Edition
AASHTO T 307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
AASHTO T 301-2008 Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer
AASHTO T301-1999 Standard Method of Test for Elastic Recovery Test of Bituminous Materials by Means of a Ductilometer Twentieth Edition
AASHTO TP31-1996 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension 2000 Edition; Interim Edition 4/2001
AASHTO TP 79-2013 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO TP 79-2015 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO TP 79-2009 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO T 292-1997 Standard Method of Test for Resilient Modulus of Subgrade Soils and Untreated Base/Subbase Materials HM-22; Part IIA R(2000)
AASHTO TP 79-2010 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt: (HMA) Using the Asphalt Mixture Performance Tester (AMPT) Revision 1

AASHTO - American Association of State Highway and Transportation Officials, Test method for elastic modulus of composite materials

T 307-1999 Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials
TP46-1994 Standard Test Method for Determining the Resilient Modulus of Soils and Aggregate Materials
TP31-1996 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension
T 301-1994 Standard Method of Test for Elastic Recovery Test of Bituminous Materials by Means of a Ductilometer (Eighteenth Edition)
TP31-1994 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension (Edition 1B)
T294-1994 Standard Method of Test for Resilient Modulus of Unbound Granular Base/ Subbase Materials and Subgrade Soils - SHRP Protocol P46
T292-1991 Standard Method of Test for Resilient Modulus of Subgrade Soils and Untreated Base/Subbase Materials (Eighteenth Edition)
T 292-1997 Standard Method of Test for Resilient Modulus of Subgrade Soils and Untreated Base/Subbase Materials (No Superseded)
T 301-1999 Standard Method of Test for Elastic Recovery Test of Bituminous Materials by Means of a Ductilometer (Nineteenth Edition; Revised Per Interim Specifications - Tests and Methods - 1999)
TP 123-2016 Standard Method of Test for Measuring Asphalt Binder Yield Energy and Elastic Recovery Using the Dynamic Shear Rheometer
TP 79-2013 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2015 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2009 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2012 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2011 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt: (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2010 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt: (HMA) Using the Asphalt Mixture Performance Tester (AMPT) (Revision 1)

Standard Association of Australia （SAA）, Test method for elastic modulus of composite materials

AS 1774.31.2:2001/Amdt 2:2002
AS 1774.31.1:2000/Amdt 1:2002
AS 1774.31.2:2001/Amdt 1:2001
AS 1774.31.2:2001(R2013)
AS 1774.31.1:2000(R2013)
AS 1180.4A:1972 Methods of test for hose made from elastomeric materials - Ply adhesion - Dead weight method
AS 1180.11:1982 Methods of test for hose made from elastomeric materials - Hose and coupling compatibility - Tensile method
AS 1180.4B:1972 Methods of test for hose made from elastomeric materials - Ply adhesion - Autographic method
AS 3558.1:1999 Methods of testing plastics and composite materials sanitary plumbing and fixtures - Determination of water absorption characteristics
AS 3558.11:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of impact resistance of baths for ablutionary purposes
AS 3558.19:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of impact resistance of sinks
AS/NZS 3558.12:1995 Methods of testing plastics and composite materials sanitary plumbing fixtures Method 12: Determination of resistance to thermal shock of baths for ablutionary purposes
AS 3558.12:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to thermal shock of baths for ablutionary purposes
AS 3558.15:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of impact resistance of washbasins
AS 3558.20:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to thermal shock of sinks
AS 3558.2:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of chemical and stain resistance
AS 3558.23:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to heat of the surface of sinks
AS 3558.8:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to thermal shock of laundry troughs
AS 3558.16:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to thermal shock of washbasins
AS 3558.17:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of impact resistance of shower bases and shower modules
AS 3558.18:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to thermal shock of shower bases and shower modules
AS 1289.6.8.1:1995 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the resilient modulus and permanent deformation of granular unbound pavement materials

Professional Standard - Building Materials, Test method for elastic modulus of composite materials

JC/T 678-1997 Test method for Young's modulus,shear modulus and Poisson's ratio of glass material

国家市场监督管理总局、中国国家标准化管理委员会, Test method for elastic modulus of composite materials

GB/T 37780-2019 Test method for elastic modulus，shear modulus and Poisson's ratio of glass
GB/T 38989-2020 Uniaxial compressive elastic modulus test method of materials stabilazed with inorganic binder（middle segment method）
GB/T 40406-2021 Standard test method for static modulus of elasticity and poisson's ratio of carbon materials in compression
GB/T 35465.5-2020 Test method for fatigue properties of polymer matrix composite materials—Part 5: Flexural fatigue
GB/T 1927.10-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending
GB/T 35465.4-2020 Test method for fatigue properties of polymer matrix composite materials—Part 4: Tension-compression fatigue and compression-compression fatigue
GB/T 9966.9-2021 Test methods for natural stone—Part 9: Determination of the dynamic modulus of elasticity by measuring the fundamental resonance frequency
GB/T 41498-2022 Fibre-reinforced plastic composites—Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
GB/T 35465.6-2020 Test method for fatigue properties of polymer matrix composite materials—Part 6:Fatige properties of adhesives in shear by tension
GB/T 39748.8-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate

RU-GOST R, Test method for elastic modulus of composite materials

GOST 18336-1973 Rigid cellular plastics. Method of test for modulus of elasticity
GOST R 52578-2006 Dental impression elastomeric materials. Technical requirements. Test methods
GOST 33843-2016 Polymer composites. Method for determination of shear modulus in the plane by torsion
GOST R 57578-2017 Polymer composites. Method for determination of linear thermal expansion with a interferometry
GOST R 57843-2017 Wood polymer composites. Test methods for determination of flexural mechanical properties
GOST R ISO 10768-2017 Footwear. Test method for the determination of the resistance of elastic materials for footwear to repeated extension. Fatigue resistance
GOST R 55419-2013 Composite material based on active rubber powder, modifying asphalt mixes. Technical requirements and test methods
GOST R 57948-2017 Polymer composites. Test method of determination of impact resistance of unnotched sample
GOST R 57206-2016 Polymer composites. Test method of determination of the mode II fracture toughness for the calibrated end-loaded split (C-ELS)
GOST R 56466-2015 Space systems. Materials test methods. Method of determining the linear thermal expansion coefficient composites at high temperatures
GOST R 57994-2017 Polymer composites. Test methods for fracture toughness definition and energy release speeds
GOST R 57754-2017 Polymer composites. Test method for determination of linear thermal expansion by thermomechanical analysis
GOST R 56772-2015 Polymer composites. Method for determination static energy absorption properties of honeycomb sandwich core materials
GOST R 57045-2016 Polymer composites. Test method for determination of tensile properties perpendicular to reinforcement plane
GOST R 56741-2015 Composites. Method of measuring the uniformity of absorbing electrochromic coating on a glazing surface
GOST 18299-1972 Paintwork materials. Method for determination of tensile strength, relative elongation at tear and modulus of elasticity
GOST R 57733-2017 Polymer composites. Test method for determination of inplane shear properties of hoop wound samples
GOST R 57922-2017 Ceramic composites. Test method for determination of mechanical characteristics under monotonic uniaxial tension at normal temperature
GOST EN 1849-2-2011 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Methods for determination of thickness and mass per unit area
GOST R IEC 811-2-1-1994 Methods specific to elastomeric compaunds of insulating and sheathing materials of electric cables. Ozone resistance test, hot set test, mineral oil immersion test
GOST 33685-2015 Polymer composites. Test method for determination of the interlaminar fracture toughness under shear GIIC
GOST R 57707-2017 Polymer composites. Test method for durability of adhesive joints by exposure to humidity and temperature under load
GOST R IEC 60811-2-1-2002 Test methods specific to elastomeric compounds of insulating and sheathing materials of electric and optical cables. Ozone resistance, hot set and mineral oil immersion tests
GOST R IEC 60811-2-1-2006 Common test methods for insulating and sheathing materials of electric and optical cables. Part 2-1. Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests
GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
GOST 25.603-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
GOST 25.604-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
PNST 128-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the dynamic modulus, the number of the flow of hot asphalt mixes using the setup for performance test (AMPT)

Professional Standard - Ferrous Metallurgy, Test method for elastic modulus of composite materials

YB/T 5350-2006 Method for Measuring High Temperature Elastic Modulus of Metallic Materials by Disc Oscillator Method

Professional Standard - Aerospace, Test method for elastic modulus of composite materials

QJ 2509-1993 Test method for ash content of carbon/carbon composite materials

British Standards Institution (BSI), Test method for elastic modulus of composite materials

BS EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
BS EN 13286-43:2003(2017) Unbound and hydraulically bound mixtures - Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
BS EN 13286-43:2003 Unbound and hydraulically bound mixtures - Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
BS EN 14146:2004 Natural stone test methods - Determination of the dynamic elastic modulus of elasticity (by measuring the fundamental resonance frequency)
DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) — Part 1: Test methods for characterisation of WPC materials and products
PD 6503-2:1988 Toxicity of combustion products. Guide to the relevance of small-scale tests for measuring the toxicity of combustion products of materials and composites
BS 6319-3:1990 Testing of resin and polymer/cement compositions for use in construction - Methods for measurement of modulus of elasticity in flexure and flexural strength
BS EN 14598-2:2005 Reinforced thermosetting moulding compounds - Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) - Methods of test and general requirements
BS EN 14598-2:2005(2006) Reinforced thermosetting moulding compounds - Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) - Methods of test and general requirements
BS EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance
BS 2782-4 Methods 451F to 451J:1978 Methods of testing plastics - Chemical properties - Determination of formaldehyde in phenolic mouldings (colorimetric method) - Determination of formaldehyde in phenolic mouldings (gravimetric method) - Determination of sulphates in phenolic mouldings - D
BS 6319-6:1984 Testing of resin and polymer/cement compositions for use in construction - Method for determination of modulus of elasticity in compression
BS ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
BS 2782-3 Method 323G:1997 Methods of testing plastics. Mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer
BS EN 17096:2018 Geosynthetics. Test method for the determination of the strain hardening modulus of PE-HD geosynthetic barriers
BS EN 1007-2:2002 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of linear density
BS EN 60811-603:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Measurement of total acid number of filling compounds
BS EN 1007-1:2002 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of size content
BS ISO 20975-2:2018 Fibre-reinforced plastic compositess. Determination of laminate through-thickness properties. Determination of the elastic modulus, the strength and the Weibull size effects by flexural test of unidirectional laminate, for carbon-fibre based systems
BS EN ISO 14855:2004 Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide
BS EN ISO 20337:2019 Fibre-reinforced plastic composites. Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
13/30255941 DC BS ISO 13061-4. Physical and mechanical properties of wood. Test methods for small clear specimen. Part 4. Determination of modulus of elasticity in static bending
BS 1902-10.2:1994 Methods of testing refractory materials - Investment casting shell mould systems - Determination of permeability and standard air flow capacity at elevated temperatures - Section 10.2: Determination of permeability and standard air flow capacity at elevat
DD ENV 1007-4-1994 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of tensile properties of filament at ambient temperature
BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
BS 1902 Sec.4.4:1984 Methods of testing refractory materials. Properties measured under an applied stress. Determination of modulus of rupture at ambient temperature (method 1902-404)
BS EN 1007-4:2005 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature
19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
BS EN 60811-604:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Measurement of absence of corrosive components in filling compounds
BS EN 1007-6:2008 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Determination of tensile properties of filaments at high temperature
BS EN 1007-6:2007 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature

European Committee for Standardization (CEN), Test method for elastic modulus of composite materials

EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010)
EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
DD ENV 1007-1-1993 Advanced Technical Ceramics - Ceramic Composites - Methods of Test for Reinforcements - Part 1: Determination of Size Content
EN 13286-43:2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
EN 14598-2:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
EN ISO 14129:1997 Fibre-Reinforced Plastic Composites - Determination of the in-Plane Shear Stress/Shear Strain Response, Including the in-Plane Shear Modulus and Strength, by the Plus or Minus 45 Degree Tension Test Method ISO 14129:1997
DD ENV 1007-6-2002 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filament at high temperature Ratified European Text
EN ISO 14855-2:2018 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
EN ISO 14855-2:2009 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test (ISO 1

Professional Standard - Forestry, Test method for elastic modulus of composite materials

LY/T 2382-2014 Standard test method for nondestructive evaluation of lumber using stress wave

Danish Standards Foundation, Test method for elastic modulus of composite materials

DS/EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
DS/EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance
DS/EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
DS/EN ISO 10580:2012 Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions
DS/EN 13412:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
DS/EN 13286-43:2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
DS/EN 1007-1:2003 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 1: Determination of size content
DS/EN 61788-13:2013 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
DS/ENV 1007-1:1993 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Part 1: Determination of size content
DS/EN 1007-6:2008 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature
DS/ENV 1007-2:1993 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Part 2: Determination of linear density
DS/EN 1007-4:2004 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 4: Determination of tensile properties of filaments at ambient temperature
DS/ENV 1007-3:1993 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Part 3: Determination of filament diameter
DS/EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45º tension test method
DS/ENV 1007-4:1994 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Part 4: Determination of tensile properties of filament at ambient temperature
DS/EN 60811-604:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds

Lithuanian Standards Office , Test method for elastic modulus of composite materials

LST EN 14580-2005 Natural stone test methods - Determination of static elastic modulus
LST EN 14146-2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
LST EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010)
LST EN 13412-2007 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
LST EN ISO 10580:2012 Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions (ISO 10580:2010)
LST EN 13286-43-2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
LST EN 1007-1-2003 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 1: Determination of size content
LST EN 61788-13-2013 Superconductivity -- Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites (IEC 61788-13:2012)
LST EN 1007-6-2008 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature
LST EN 1007-4-2004 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4: Determination of tensile properties of filaments at ambient temperature
LST EN 1007-4-2004/AC-2007 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4: Determination of tensile properties of filaments at ambient temperature
LST EN ISO 14129:2001 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45° tension test method (ISO 14129:1997)

Association Francaise de Normalisation, Test method for elastic modulus of composite materials

NF EN 14580:2005 Méthodes d'essai des pierres naturelles - Détermination du module d'élasticité statique
NF B10-638*NF EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
NF EN ISO 10768:2010 Chaussures - Méthode d'essai pour la détermination de la résistance des élastiques de chaussures à des extensions répétées - Résistance à la fatigue
NF EN 14146:2004 Méthodes d'essai pour pierres naturelles - Détermination du module d'élasticité dynamique (par la mesure de la fréquence de résonance fondamentale)
NF EN 15534-1/IN1:2018 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 1 : Méthodes d'essai pour la caractérisation des compositions et d...
NF EN 15534-1+A1:2018 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 1 : Méthodes d'essai pour la caractérisation des compositions et d...
NF G38-206*NF EN 17096:2018 Geosynthetics - Test method for the determination of the strain hardening modulus of PE-HD geosynthetic barriers
NF EN 17096:2018 Géosynthétiques - Méthode d'essai pour la détermination du module d'écrouissage des Géomembranes HDPE
NF T58-300-1/IN1*NF EN 15534-1/IN1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : Test methods for characterisation of compounds and products
NF T58-300-1*NF EN 15534-1+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : Test methods for characterisation of compounds and products
NF B10-631*NF EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
NF EN 13286-43:2003 Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 43 : méthode d'essai pour la détermination du module d'élasticité des mélanges traités aux liants hydrauliques
NF EN 13412:2006 Produits et systèmes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination du module d'élasticité en compression
NF P98-846-43*NF EN 13286-43:2003 Unbound and hydraulically bound mixtures - Part 43 : test method for the determination of the modulus of elasticity of hydraulically bound mixtures.
XP ISO/TS 21975:2020 Nanotechnologies - Films nanocomposites polymères pour emballages alimentaires avec des propriétés barrières - Spécification des caractéristiques et méthodes de mesure
NF T57-401*NF EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
NF EN ISO 20337:2019 Composites plastiques renforcés de fibres - Méthode d'essai de cisaillement à l'aide d'un châssis de cisaillement pour la détermination de la contrainte de cisaillement/déformation au cisaillement dans le plan et du module de cisaillement
NF EN IEC 61189-2-501:2022 Méthodes d'essai pour les matériaux électriques, les cartes imprimées et autres structures d'interconnexion et ensembles - Partie 2-501 : méthodes d'essai des matériaux pour structures d'interconnexion - Mesure de la puissance élastique et d...
NF EN IEC 60404-16:2018 Matériaux magnétiques - Partie 16 : méthodes de mesure des propriétés magnétiques des bandes en alliage amorphe à base de fer à l'aide de l'essai sur tôle unique
NF EN 61788-13:2013 Supraconductivité - Partie 13 : mesure des pertes en courant alternatif - Méthodes de mesure par magnétomètre des pertes par hystérésis dans les composites multi-filamentaires supraconducteurs
NF T51-803-1*NF EN ISO 14855-1:2013 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1 : general method
NF P98-257-1:2004 Roadway-related tests - Homogeneity of mixtures - Part 1 : test method for determination of the quality of manual coating of cola-mix asphalt
NF P98-240-1:1993 Road testing. Measurement of the rate of hydraulic binders and additives in the cementitious materials. Part 1 : chemical method for the determination of the cement content in a new mixed material.
NF EN 1007-6:2008 Céramiques techniques avancées - Céramiques composites - Méthodes d'essai pour renforts - Partie 6 : détermination des propriétés en traction du filament à haute température
NF T25-714*NF EN 1007-6:2008 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 6 : determination of tensile properties of filament at high temperature

German Institute for Standardization, Test method for elastic modulus of composite materials

DIN EN 14580:2005-07 Natural stone test methods - Determination of static elastic modulus; German version EN 14580:2005
DIN EN 14580:2005 Natural stone test methods - Determination of static elastic modulus; German version EN 14580:2005
DIN 51942:2002 Testing of carbonaceous materials - Determination of dynamic modulus of elasticity by pulse excitation - Solid materials
DIN EN 14146:2004-06 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency); German version EN 14146:2004
DIN EN ISO 10768:2010-12 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010); German version EN ISO 10768:2010
DIN 51942 Berichtigung 1:2006 Testing of carbonaceous materials - Determination of dynamic moduls of elasticity by pulse excitation - Solid materials, Corrigenda to DIN 51942:2002-03
DIN EN 17096:2019 Geosynthetics - Test method for the determination of the strain hardening modulus of PE-HD geosynthetic barriers
DIN EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency); German version EN 14146:2004
DIN EN 13286-43:2003-07 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures; German version EN 13286-43:2003
DIN EN 13412:2006-11 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression; German version EN 13412:2006
DIN EN 13286-43:2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures; German version EN 13286-43:2003
DIN EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements; German version EN 13677-2:2003
DIN EN 14598-2:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements; German version EN 14598-2:2005
DIN EN IEC 61189-2-501:2020 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-501: Test methods for materials for interconnection structures - Measurement of Resilience strength and Resilience strength Retention Factor
DIN EN IEC 61189-2-501:2020-12 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-501: Test methods for materials for interconnection structures - Measurement of Resilience strength and Resilience strength Retention Fact...
DIN EN 15534-1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products (includes Amendment A1:2017)
DIN EN 17096:2019-02 Geosynthetics - Test method for the determination of the strain hardening modulus of PE-HD geosynthetic barriers; German version EN 17096:2018
DIN EN ISO 20337:2020-01 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018); German version EN ISO 20337:2019
DIN EN 1007-6:2008-02 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature; German version EN 1007-6:2007
DIN SPEC 4885:2014 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus; Text in German and English
DIN EN ISO 14129:1998-02 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ± 45° tension test method (ISO 14129:1997); German version EN ISO 14129:1997
DIN EN 1007-1:2002 Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 1: Determination of size content; German version EN 1007-1:2002
DIN EN ISO 14855-2:2009 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test (ISO 1
DIN EN 1007-2:2002 Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 2: Determination of linear density; German version EN 1007-2:2002
DIN EN 1007-6:2008 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature; English version of DIN EN 1007-6:2008-02

Professional Standard - Machinery, Test method for elastic modulus of composite materials

JB/T 12748-2015 Methods of test for the performance of wood alternative composite material for delivery drums for wires and cables

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Test method for elastic modulus of composite materials

GB/T 35469-2017 Test method of anti-mold activity of building wood-plastic composites
GB/T 13477.17-2017 Test method for building sealants—Part 17：Determination of elastic recovery
GB/T 34437-2017 Test method of the oxygen permeability of the multilayer composite plastics pipe
GB/T 35465.1-2017 Test method for fatigue properties of polymer matrix composite materials—Part 1：General principle
GB/T 35465.3-2017 Test method for fatigue properties of polymer matrix composite materials -Part 3: Tension-tension fatigue
GB/T 35465.2-2017 Test method for fatigue properties of polymer matrix composite materials -Part 2: Statistical analysis of linear or linearized stress-life(S-N) and strain-life(ε-N) fatigue data

American National Standards Institute （ANSI), Test method for elastic modulus of composite materials

ANSI/ASTM C747:2005 Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ANSI/ASTM A893:1997 Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
ANSI/ICEA T-28-562-2003 Test Method For Measurement of Hot Creep of Polymeric Insulations
ANSI/ASTM E1740:2010 Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ANSI/ASTM E2058a:2013 Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ANSI/ASTM D5568:2008 Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
ANSI/ASTM E1740:2015 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter

Professional Standard - Non-ferrous Metal, Test method for elastic modulus of composite materials

YS/T 63.13-2016 Test methods for carbon materials for aluminum - Part 13: Determination of elastic modulus

Korean Agency for Technology and Standards (KATS), Test method for elastic modulus of composite materials

KS F 2376-2014 Standard test method for determining the resilient modulus of asphalt mixtures using indirect tensile mode
KS M ISO 14129-2016(2021) Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
KS P ISO 17190-4-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 4：Determination of moisture content by mass loss upon heating
KS C IEC 60811-3-2:2020 Common test methods for insulating and sheathing materials of electric cables — Part 3: Methods specific to PVC compounds —Section 2: Loss of mass test — Thermal stability test
KS P ISO 17190-10-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 10：Determination of extractable polymer content by potentiometric titration
KS P ISO 17190-9-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 9：Gravimetric determination of density
KS P ISO 17190-7-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 7：Gravimetric determination of absorption under pressure
KS C IEC 60811-604:2016 Electric and optical fibre cables — Test methods for non-metallic materials — Part 604: Physical tests — Measurement of absence of corrosive components in filling compounds

国家质量监督检验检疫总局, Test method for elastic modulus of composite materials

SN/T 4879-2017 Test methods for combustion properties of polymers and their composites Microcalorimetry

IN-BIS, Test method for elastic modulus of composite materials

VN-TCVN, Test method for elastic modulus of composite materials

TCVN 5936-1995 Test methods for insulations and sheaths of electric cables and cords (Elastomeric and thermoplastic compounds)
TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength

AENOR, Test method for elastic modulus of composite materials

UNE-EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
UNE-EN ISO 10768:2011 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010)
UNE-EN 13412:2008 Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
UNE-EN 13286-43:2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
UNE-EN ISO 14129:1999 FIBRE-REINFORCED PLASTIC COMPOSITES. DETERMINATION OF THE IN-PLANE SHEAR STRESS/SHEAR STRAIN RESPONSE, INCLUDING THE IN-PLANE SHEAR MODULUS AND STRENGTH, BY THE +-45o TENSION TEST METHOD. (ISO 14129:1997).
UNE-EN 60811-604:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds

CEN - European Committee for Standardization, Test method for elastic modulus of composite materials

EN 17096:2018 Geosynthetics - Test method for the determination of the strain hardening modulus of PE-HD geosynthetic barriers

BELST, Test method for elastic modulus of composite materials

STB 1501-2013 Highways. Мethod of determination elastic modulus and uniformity consolidation of materials of layers of road designs

Insulated Cable Engineers Association （ICEA), Test method for elastic modulus of composite materials

ICEA T-28-562-2003 TEST METHOD FOR MEASUREMENT OF HOT CREEP OF POLYMERIC INSULATIONS

Liaoning Provincial Standard of the People's Republic of China, Test method for elastic modulus of composite materials

DB21/T 2837-2017 On-site test method for mass per unit area of polymer waterproof material composite sheet (FS2)

未注明发布机构, Test method for elastic modulus of composite materials

BS 6319-6:1984(2011) Testing of resin compositions for use in construction — Part 6 : Method for determination of modulus of elasticity in compression
BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength
BS EN 1007-4:2004(2009) Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4 : Determination of tensile properties of filaments at ambient temperature

ES-UNE, Test method for elastic modulus of composite materials

UNE-EN 15534-1:2014+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
UNE-EN 17096:2020 Geosynthetics - Test method for the determination of the strain hardening modulus of PE-HD geosynthetic barriers
UNE-EN 1007-6:2007 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature (Endorsed by AENOR in January of 2008.)
UNE-EN 1007-1:2002 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 1: Determination of size content (Endorsed by AENOR in November of 2002.)
UNE-EN ISO 20337:2020 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
UNE-EN 61788-13:2012 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites (Endorsed by AENOR in November of 2012.)

International Organization for Standardization (ISO), Test method for elastic modulus of composite materials

ISO/PRF 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
ISO 13061-4:2014 Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 4: Determination of modulus of elasticity in static bending
ISO 20337:2018 Fibre-reinforced plastic composites — Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
ISO 13061-4:2014/Amd 1:2017 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 4: Determination of modulus of elasticity in static bending — Amendment 1
ISO 20975-2:2018 Fibre-reinforced plastic compositess - Determination of laminate through-thickness properties - Part 2: Determination of the elastic modulus, the strength and the Weibull size effects by flexural test of unidirectional laminate, for carbon-fibre based sys
ISO 14855-1:2012 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method
ISO 14855-2:2007/cor 1:2009 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test; Techn
ISO 14855-2:2007 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
ISO 14855-2:2018 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test

ES-AENOR, Test method for elastic modulus of composite materials

UNE 53-621-1989

DE-VDA, Test method for elastic modulus of composite materials

VDA 275-1994 Moulded composites and fleeces for vehicles - Determination of formaldehyde release - Test procedure called modified flask method

住房和城乡建设部, Test method for elastic modulus of composite materials

JG/T 528-2017 Test method for emission of volatile organic compounds from building decoration materials - test cabin method

NZ-SNZ, Test method for elastic modulus of composite materials

AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)

CENELEC - European Committee for Electrotechnical Standardization, Test method for elastic modulus of composite materials

EN 61788-13:2003 Superconductivity Part 13: AC loss measurements Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
EN 61788-13:2012 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
EN 60811-2-1:1998 Insulating and Sheathing Materials of Electric and Optical Cables - Common Test Methods - Part 2-1: Methods Specific to Elastomeric Compounds - Ozone Resistance@ Hot Set and Mineral Oil Immersion Tests

RO-ASRO, Test method for elastic modulus of composite materials

STAS SR EN 60811-2-1-1995 Insulating and sheathing materials of electric cables Common test methods Part 2 : Methods specific to elastomeric compounds Section 1 : Ozone rezistance test - Hot set test - Mineral oil immersion test
STAS SR EN 60811-3-2-1996 Insulating and sheathing materials of electric cables Common test methodes Part 3: Methods specific to PVC compounds Section 3: Loss of mass test - Thermal stability test

KR-KS, Test method for elastic modulus of composite materials

KS M ISO 14129-2016 Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
KS C IEC 60811-3-2-2020 Common test methods for insulating and sheathing materials of electric cables — Part 3: Methods specific to PVC compounds —Section 2: Loss of mass test — Thermal stability test
KS C IEC 60811-604-2016 Electric and optical fibre cables — Test methods for non-metallic materials — Part 604: Physical tests — Measurement of absence of corrosive components in filling compounds

International Electrotechnical Commission (IEC), Test method for elastic modulus of composite materials

IEC 61189-2-501:2022 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-501: Test methods for materials for interconnection structures - Measurement of resil

Indonesia Standards, Test method for elastic modulus of composite materials

SNI 03-6755-2002 Test methods for bulk specific gravity of compact asphalt mixture using parafin layer test specimens
SNI 04-6190.2-1999
SNI 03-6757-2002 Test method for bulk specific gravity of compact asphalt mixture using saturated surface dry test specimens

European Committee for Electrotechnical Standardization（CENELEC）, Test method for elastic modulus of composite materials

EN 60811-604:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds