ZH
RU
ES

When the rheometer is used

When the rheometer is used, Total:468 items.

In the international standard classification, When the rheometer is used involves: Measurement of volume, mass, density, viscosity, Construction materials, Electricity. Magnetism. Electrical and magnetic measurements, Plastics, Measurement of fluid flow, Waxes, bituminous materials and other petroleum products, Raw materials for rubber and plastics, Adhesives, Road engineering, Rubber, Cereals, pulses and derived products, Petroleum products in general, Mechanical testing, Transformers. Reactors, External sewage systems, Non-destructive testing, Rubber and plastics products, Paints and varnishes, Protection against fire, Equipment for processing of minerals, Animal feeding stuffs, Rectifiers. Convertors. Stabilized power supply, Thermodynamics and temperature measurements, Power transmission and distribution networks, Industrial automation systems, Powder metallurgy, Safety of machinery, Geology. Meteorology. Hydrology, Lubricants, industrial oils and related products, Insulating fluids, Equipment for petroleum and natural gas industries, Materials for aerospace construction, Milk and milk products, Nuclear energy engineering, Road vehicles in general, Cellular materials, Products of the textile industry, Railway rolling stock, Medical equipment, Biology. Botany. Zoology, Shipbuilding and marine structures in general, Quality, Metrology and measurement in general, Protection of and in buildings, Linear and angular measurements, Petroleum, petroleum products and natural gas handling equipment, Photography, Protective equipment, Optics and optical measurements, Construction technology, Optoelectronics. Laser equipment, Surface treatment and coating, Bearings.

Association Francaise de Normalisation, When the rheometer is used

NF ISO 6502-3:2023 Caoutchouc - Mesure des caractéristiques de vulcanisation à l'aide de rhéomètres - Partie 3 : rhéomètre sans rotor
NF ISO 6502-2:2018 Caoutchouc - Mesure des caractéristiques de vulcanisation à l'aide de rhéomètres- Partie 2 : rhéomètre à disque oscillant
NF ISO 6502-1:2018 Caoutchouc - Mesure des caractéristiques de vulcanisation à l'aide du rhéomètres - Partie 1 : introduction
NF C42-544-1/A1:2001 Instrument transformers - Part 1 : current transformers.
NF C42-544-1/A2:2003 Instrument transformers - Part 1 : current transformers.
NF T51-710:1986 Plastics. Polyvinyl chloride pastes. Determination of apparent viscosity using the severs rheometer.
NF T30-070*NF EN ISO 2431:2019 Paints and varnishes - Determination of flow time by use of flow cups
NF C42-569-2*NF EN 61869-2:2013 Instrument transformers - Part 2 : additional requirements for current transformers
NF V03-717-2*NF EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2 : determination of rheological properties using a extensograph
NF EN ISO 5530-2:2015 Farines de blé tendre - Caractéristiques physiques des pâtes - Partie 2 : détermination des caractéristiques rhéologiques au moyen de l'extensographe
NF EN ISO 13517:2020 Poudres métalliques - Détermination du temps d'écoulement au moyen d'un entonnoir calibré (cône d'écoulement de Gustavsson)
NF C42-544-6:2001 Instrument transformers - Part 6 : requirements for protective current transformers for transient performance.
NF EN ISO 5530-1:2015 Farines de blé tendre - Caractéristiques physiques des pâtes - Partie 1 : détermination de l'absorption d'eau et des caractéristiques rhéologiques au moyen du farinographe
NF EN 17408:2020 Détermination de l'aptitude à l'écoulement et à l'application des adhésifs viscoélastiques avec la méthode de la rhéologie oscillométrique
NF EN ISO 4490:2018 Poudres métalliques - Détermination du temps d'écoulement au moyen d'un entonnoir calibré (appareil de Hall)
NF EN 17643:2022 Bitumes et liants bitumineux - Détermination de la température d'équi-module de rigidité et de l'angle de phase à l'aide d'un rhéomètre à cisaillement dynamique (DSR) - Essai BTSV
NF P18-452:2017 Bétons - Mesure du temps d'écoulement des bétons et des mortiers au maniabilimètre
NF EN 12846-1:2022 Bitumes et liants bitumineux - Détermination du temps d'écoulement à l'aide d'un viscosimètre à écoulement- Partie 1 : émulsions bitumineuses
NF ISO 11843-3:2003 Capacité de détection - Partie 3 : méthodologie pour déterminer la valeur critique d'une variable de réponse lorsque aucun étalonnage n'est utilisé
NF S93-123-9:2005 Infusion equipment for medical use - Part 9 : fluid lines for use with pressure infusion equipment.
NF X65-011-2*NF ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2 : primary calibration methods
NF V03-710:1992 Wheat flour. Physical characteristics of doughs. Part 4 : determination of rheological properties using an alveograph.
NF S93-123-10:2005 Infusion equipment for medical use - Part 10 : accessories for fluid lines for use with pressure infusion equipment.
NF EN IEC 63047:2021 Instrumentation nucléaire - Format de données pour l'acquisition de données numériques en mode liste utilisées dans la détection et la mesure des rayonnements
NF EN 16345:2012 Bitumes et liants bitumineux - Mesure du temps d'écoulement des émulsions bitumineuses avec le Viscosimètre Redwood No. II
NF S93-123-9*NF EN ISO 8536-9:2015 Infusion equipment for medical use - Part 9 : fluid lines for single use with pressure infusion equipment

German Institute for Standardization, When the rheometer is used

DIN 53019-4:2016 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
DIN 53019-4:2016-10 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
DIN EN ISO 2431:2020-02 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09); German version EN ISO 2431:2019
DIN 51810-2:2017-04 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode; German version CEN/TS 15325:2008
DIN EN ISO 5530-2:2020-06 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/DIS 5530-2:2020); German and English version prEN ISO 5530-2:2020 / Note: Date of issue 2020-05-08*Intended as replacement for...
DIN EN ISO 5530-2:2015-03 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012); German version EN ISO 5530-2:2014 / Note: To be replaced by DIN EN ISO 5530-2 (2020-06).
DIN EN 14770:2012-08 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle using a Dynamic Shear Rheometer (DSR); German version EN 14770:2012 / Note: To be replaced by DIN EN 14770 (2022-03).
DIN EN ISO 5530-1:2015-03 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2013); German version EN ISO 5530-1:2014 / Note: To be replaced by DIN EN ISO 5530-1 (2020-06).
DIN EN ISO 5530-1:2020-06 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO/DIS 5530-1:2020); German and English version prEN ISO 5530-1:2020 / Note: Date of issue 2020-05-08*Intended...
DIN 54811:1984 Testing of plastics; determining the fluidity of plastics melts by the capillary rheometer
DIN EN ISO 5530-2:2020 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/DIS 5530-2:2020); German and English version prEN ISO 5530-2:2020
DIN 51810-4:2021 Testing of lubricants - Determination of the consistency of metal saponified lubricating greases using an oscillatory rheometer with a cone/plate system
DIN 51810-4:2021-04 Testing of lubricants - Determination of the consistency of metal saponified lubricating greases using an oscillatory rheometer with a cone/plate system
DIN EN 17643:2022-09 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test; German version EN 17643:2022
DIN EN 17408:2020-11 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry; German version EN 17408:2020
DIN 51810-2:2017 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN EN ISO 5530-1:2020 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO/DIS 5530-1:2020); German and English version prEN ISO 5530-1:2020
DIN EN 17643:2022 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test
DIN EN 60909-0 Bb.3:2003 Short-circuit currents in three-phase a.c. systems - Factors for the calculation of short-circuit currents according to IEC 60909-0 (IEC/TR 60909-1:2002)
DIN 51810-2:2011 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012); German version EN ISO 5530-2:2014
DIN EN 17408:2020 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry; German version EN 17408:2020
DIN 42600-2:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 2: Current transformers U<(Index)m> = 0,72 kV and U<(Index)m> = 1,2 kV - Main dimensions
DIN EN ISO 5530-1:2015 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2013); German version EN ISO 5530-1:2014
DIN EN 1110:2011 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature; German version EN 1110:2010
DIN EN 12305:1998 Biotechnology - Modified organisms for application in the environment - Guidance for the sampling strategies for deliberate releases of genetically modified plants; German version EN 12305:1997
DIN EN 16345:2012-09 Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer; German version EN 16345:2012
DIN 31652-3:1983 Plain bearings; hydrodynamic plain journal bearings designed for operation under steady-state conditions; operational parameters necessary when designing circular cylindrical bearings

YU-JUS, When the rheometer is used

JUS G.S1.508-1997 Plastics - Determination of powder-mix time of PVC resins using a torque rheometer
JUS G.S1.507-1997 Plastics - Fusion of poly(vinyl chloride) (PVC) compounds using a torque rheometer

American Society for Testing and Materials (ASTM), When the rheometer is used

ASTM C1749-17 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
ASTM C1749-17a Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
ASTM D2396-20 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D6204-12 Standard Test Method for Rubbermdash;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D7175-05 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-07 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-05e1 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D5099-93(2003) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D5099-93(1998) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D664-09 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-11ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D6648-08 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D664-18e2 Test Method for Determination of Flexible Creep Hardness of Asphalt Binders Using a Bending Beam Rheometer
ASTM D7654/D7654M-10 Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
ASTM D5099-08 Standard Test Methods for Rubberx2014;Measurement of Processing Properties Using Capillary Rheometry
ASTM D2396-94(2004) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D2396-94(1999)e1 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D2396-94(2012) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM F2550-06 Standard Practice for Locating Leaks in Sewer Pipes Using Electro-Scan--the Variation of Electric Current Flow Through the Pipe Wall
ASTM D5099-08(2017) Standard Test Methods for Rubber&x2014;Measurement of Processing Properties Using Capillary Rheometry
ASTM D7271-06(2020) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM C1749-12 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
ASTM D6648-01 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D7552-09 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
ASTM D3835-79(1983) Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer
ASTM C1874-19 Standard Test Method for Measuring the Rheological Properties of Cementitious Materials Using a Coaxial Rotational Rheometer
ASTM C1874-20 Standard Test Method for Measuring Rheological Properties of Cementitious Materials Using Coaxial Rotational Rheometer
ASTM D7175-08 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-08 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-10 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-08a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-15 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-20 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7271-06 Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM D6204-07 Standard Test Method for Rubber-Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D7175-15 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D6204-19a Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-19 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D7271-06(2012) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM D7405-10a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM UOP344-87 Moisture in Hydrocarbon Streams Using an On-Line Analyzer
ASTM D6204-04 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-99 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-01 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-05 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-15 Standard Test Method for Rubber&x2014;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM C1784-20 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
ASTM D6601-12 Standard Test Method for Rubber Propertiesmdash;Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM D7552-22 Standard Test Method for Determining the Complex Shear Modulus (G*) of Asphalt Mixtures Using Dynamic Shear Rheometer
ASTM D7825-12 Standard Guide for Generating a Process Stream Property Value through the Application of a Process Stream Analyzer
ASTM E2510-07 Standard Test Method for Torque Calibration or Conformance of Rheometers
ASTM E2510-07(2013) Standard Test Method for Torque Calibration or Conformance of Rheometers
ASTM D8059-19 Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
ASTM D7654/D7654M-10(2018) Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
ASTM D6601-02 Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM D6601-19 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM E3277-21 Standard Test Method for Determining Whether a Material is a Liquid or a Solid by Rheometry
ASTM E3277-22 Standard Test Method for Determining Whether a Material is a Liquid or a Solid by Rheometry
ASTM D5099-08(2022) Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
ASTM D3835-02 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D3835-08 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D7750-12 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D2538-18 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
ASTM D5099-08(2013) Standard Test Methods for Rubbermdash;Measurement of Processing Properties Using Capillary Rheometry
ASTM D7971-20 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D7512-09(2015) Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
ASTM D3835-16 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D7605-11(2016) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D7605-11(2022) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D3795-00a Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM B855-17 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
ASTM D8184-18 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D8184-18e1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D2538-95 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
ASTM D2538-95(2001) Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
ASTM D2538-02 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
ASTM C490-07 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-09 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-10 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-17 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM D5422-03 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM D5422-17 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM E633-00(2005) Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800176;F (1000176;C) in Air
ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E2246-11(2018) Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2245-11(2018) Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM D3795-00a(2006) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D3795-00a(2012) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D7605-11 Standard Test Method for Thermoplastic ElastomersMeasurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D5422-09 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM D7605-10 Standard Test Method for Thermoplastic Elastomersx2014;Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM C490-04 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490-00a Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-11 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-11e1 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM E2338-06 Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards
ASTM E2338-11 Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards
ASTM D8059-19(2022) Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
ASTM D8059-16 Standard Test Method for Rubber Compounds&x2014;Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
ASTM C1784-14 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products

Japanese Industrial Standards Committee (JISC), When the rheometer is used

JIS C 1731-1:1998 Instrument transformers for testing purpose and used with general instrument Part 1: Current transformers
JIS C 1731-2:1998 Instrument transformers for testing purpose and used with general instrument Part 2: Voltage transformers
JIS C 1216:1995 Alternating-current watt-hour meters (for connection through instrument transformer)
JIS K 7199:1999 Plastics -- Determination of the fluidity of plastics using capillary and slit-die rheometers
JIS K 7199:1991 Testing method for flow properties of thermoplastics with a capillary rheometer
JIS C 1216-2:2009 Alternating-current watt-hour meters (for connection through instrument transformer) -- Part 2: Measuring instruments used in transaction or certification
JIS C 1216-2:2017 Alternating-current watt-hour meters (for connection through instrument transformer) -- Part 2: Measuring instruments used in transaction or certification
JIS K 6297:2020 Rubber, unvulcanized -- Determination of viscosity and stress relaxation using a rotorless sealed rheometer
JIS C 1216-2 AMD 1:2014 Alternating-current watt-hour meters (for connection through instrument transformer) -- Part 2: Measuring instruments used in transaction or certification (Amendment 1)
JIS K 7381:2002 Plastics -- Polyvinyl chloride pastes -- Determination of apparent viscosity using the Severs rheometer
JIS B 8572-4:2011 Fuel oil flow meters -- Measuring instruments used in transaction or certification -- Part 4: Stationary fuel oil flow meters
JIS B 8572-4:2014 Fuel oil flow meters.Measuring instruments used in transaction or certification.Part 4: Stationary fuel oil flow meters, fuel oil flow meters on road tankers, mobile type fuel oil flow meters
JIS B 8572-3:2011 Fuel oil flow meters -- Measuring instruments used in transaction or certification -- Part 3: Small amount fuel oil flow meters

International Organization for Standardization (ISO), When the rheometer is used

ISO/TR 12765:1998 Measurement of fluid flow in closed conduits - Methods using transit-time ultrasonic flowmeters
ISO 4575:1978 Plastics — Polyvinyl chloride pastes — Determination of apparent viscosity using the Severs rheometer
ISO/FDIS 13145:2023 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
ISO 13145:2023 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
ISO 2431:2019 Paints and varnishes — Determination of flow time by use of flow cups
ISO 2431:1980 Paint and varnishes — Determination of flow time by use of flow cups
ISO 4575:2007 Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity using the Severs rheometer
ISO 14934-4:2014 Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
ISO 5530-2:2020 Wheat flour — Physical characteristics of doughs — Part 2: Determination of rheological properties using an extensograph
ISO 11443:2005 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO 11443:1995 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO 11443:2014 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO 11443:2021 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO 8322-7:1991 Building construction; measuring instruments; procedures for determining accuracy in use; part 7: instruments when used for setting out
ISO 5530-4:1991 Wheat flour; physical characteristics of doughs; part 4: determination of rheological properties using an alveograph
ISO/TS 14934-4:2007 Fire tests - Calibration of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
ISO/TS 15768:2000 Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters
ISO 5530-1:2020 Wheat flour — Physical characteristics of doughs — Part 1: Determination of water absorption and rheological properties using a farinograph
ISO 5530-4:1991/Cor 1:1992 Wheat flour; physical characteristics of doughs; part 4: determination of rheological properties using an alveograph; technical corrigendum 1
ISO 6721-10:1999 Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO 6721-10:2015 Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO/TS 24154:2005 Hydrometry - Measuring river velocity and discharge with acoustic Doppler profilers
ISO/DIS 6996:2023 Bunkering - Meter verification using master Coriolis mass flow meter
ISO/CD 6721-10:2023 Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate and a cone-and-plate oscillatory rheometer
ISO/TS 17996:2006 Cheese - Determination of rheological properties by uniaxial compression at constant displacement rate
ISO/TS 17996:2023|IDF/RM 205:2023 Cheese — Determination of rheological properties by uniaxial compression at constant displacement rate
ISO 17996:2006|IDF 205:2006 Rheological properties of cheese using uniaxial pressure at constant displacement rate
ISO 5530-4:1983 Wheat flour — Physical characteristics of doughs — Part 4: Determination of rheological properties using an alveograph
ISO 5530-2:1988 Wheat flour; physical characteristics of doughs part 2: determination of rheological properties using an extensograph
ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
ISO 14934-2:2006 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
ISO 8536-10:2004 Infusion equipment for medical use - Part 10: Accessories for fluid lines for use with pressure infusion equipment
ISO 8536-9:2004 Infusion equipment for medical usePart 9:Fluid lines for use with pressure infusion equipment
ISO 8536-9:2015 Infusion equipment for medical use - Part 9: Fluid lines for single use with pressure infusion equipment
ISO/TS 16975-4:2022 Respiratory protective devices — Selection, use and maintenance — Part 4: Selection and usage guideline for respiratory protective devices under pandemic/epidemic/outbreak of infectious respiratory di
ISO 8322-8:1992 Building construction; measuring instruments; procedures for determining accuracy in use; part 8: electronic distance-measuring instruments up to 150 m

Korean Agency for Technology and Standards (KATS), When the rheometer is used

KS F 2393-2014 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS F 2393-2019 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS C IEC 60044-1:2003 Instrument transformers－Part 1：Current transformers
KS F 2390-2014 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS F 2390-2019 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS C 1207-1995(2000) ALTERNATING-CURRENT WATT-HOUR METERS (FOR CONNECTION THROUGH INSTRUMENT TRANSFORMER)
KS C 1207-1980 ALTERNATING-CURRENT WATT-HOUR METERS (FOR CONNECTION THROUGH INSTRUMENT TRANSFORMER)
KS C IEC 60044-6-2003(2018)
KS M 3004-2013 Testing method for flow properties of thermoplastics with a capillary rheometer
KS M ISO 11443-2017(2022) Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS B ISO TR 12765:2005 Measurement of fluid flow in closed conduits－Methods using transit-time ultrasonic flowmeters
KS F 2390-2009 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS M ISO 6721-10:2003 Plastics-Determination of dynamic mechanical properties-Part 10:Complex shear viscosity using a parallel plate oscillatory rheometer
KS M ISO 6721-10:2016 Plastics－Determination of dynamic mechanical properties－Part 10：Complex shear viscosity using a parallel plate oscillatory rheometer
KS C IEC 60044-6:2003 Instrument transformers－Part 6：Requirements for protective current transformers for transient performance
KS C IEC 62770:2015 Fluids for electrotechnical applications — Unused natural esters for transformers and similar electrical equipment
KS P ISO 8536-9:2010 Infusion equipment for medical use-Part 9:Fluid lines for use with pressure infusion equipment
KS P ISO 8536-9:2017 Infusion equipment for medical use－Part 9：Fluid lines for use with pressure infusion equipment
KS C IEC 62770-2015(2020) Fluids for electrotechnical applications — Unused natural esters for transformers and similar electrical equipment
KS P ISO 8536-10:2010 Infusion equipment for medical use－Part 10：Accessories for fluid lines for use with pressure infusion equipment
KS P ISO 8536-10:2017 Infusion equipment for medical use－Part 10：Accessories for fluid lines for use with pressure infusion equipment
KS C IEC 61481-1-2016(2021) Live working — Phase comparators — Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
KS C IEC 61243-1-2016(2021) Live working－Voltage detectors－Part 1：Capacitive type to be used for voltages exceeding 1 kV a.c.
KS B ISO 8322-8:2002 Building construction－Measuring instruments－Procedures for determining accuracy in use－Part 8：Electronic distance－measuring instruments up to 150 m

CH-SNV, When the rheometer is used

SN EN 17408-2021 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry

IT-UNI, When the rheometer is used

UNI EN 17408-2021 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry

Lithuanian Standards Office , When the rheometer is used

LST EN 17408-2020 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
LST EN ISO 2431:2012 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
LST ISO 5530-1:2004 Wheat flour. Physical characteristics of doughs. Part 1: Determination of water absorption and rheological properties using a farinograph
LST EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012)
LST ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012, identical)
LST EN ISO 9396:2001 Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus (ISO 9396:1997)
LST EN 16345-2012 Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer
LST EN 60296-2012 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear (IEC 60296:2012)

PL-PKN, When the rheometer is used

PN-EN 17408-2021-02 E Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
PN C89291-24-1991 Poly(vinyl chloride) Determination of apparent viscosity of a past? using the Severs rheometer

The American Road & Transportation Builders Association, When the rheometer is used

AASHTO T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO TP 70-2011 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO TP 70-2013 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 350-2014 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO TP 70-2010 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) Revision 1
AASHTO T 313-2002 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) HM-22; Part IIB; Formaly AASHTO TP 1
AASHTO T 315-2002 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) HM-22; Part IIB; Formaly AASHTO TP 5
AASHTO TP 70-2007 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)
AASHTO M 210-2010 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210-2011 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210-2012 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210M/M 210-2014 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2015 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO R 70-2016 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete

AASHTO - American Association of State Highway and Transportation Officials, When the rheometer is used

TP5-1998 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2004 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1997 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2012 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2005 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1993 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Edition 1B)
T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2004 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP 125-2016 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2003 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2008 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1998 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1997 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2005 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2012 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1993 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) (Edition 1B)
T 315-2002 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (HM-22; Part IIB; Formaly AASHTO TP 5)
T 350-2014 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2009 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2011 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2012 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2013 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2007 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 123-2016 Standard Method of Test for Measuring Asphalt Binder Yield Energy and Elastic Recovery Using the Dynamic Shear Rheometer
T 313-2002 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) (HM-22; Part IIB; Formaly AASHTO TP 1)
TP 70-2010 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Revision 1)
TP 122-2016 Standard Method of Test for Determination of Performance Grade of Physically Aged Asphalt Binder Using Extended Bending Beam Rheometer (BBR) Method
T 368-2017 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Hot-Poured Asphalt Crack Sealant by Bending Beam Rheometer (BBR)
TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)
M210-1999 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete (Nineteenth Edition; ASTM C490-96; Revised Per Interim Specifications - Specifications - 1999)
M 210-2009 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210M/M 210-2014 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2010 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2006 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2011 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2012 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
R 70M/R 70-2018 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
R 70-2016 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete

RU-GOST R, When the rheometer is used

GOST 28795-1990 Wheat flour. Physical characteristics of doughs. Determination of rheological properties using an alveograph
PNST 79-2016 Automobile roads of general use. Viscous petroleum road bitumens. The method determining of the flexural creep stiffness using the bending beam rheometer (BBR)
GOST R 54498-2011 Whole meal and flour from Triticum Aestivum. Determination of water absorption and rheological properties using a mixolab
GOST ISO 5530-2-2014 Wheat flour. Physical characteristics of doughs. Part 2. Determination of rheological properties using an extensograph
PNST 87-2016 Automobile roads of general use. Viscous petroleum road bitumens. The method determining of the properties using a dynamic shear rheometer (DSR)
PNST 89-2016 Automobile roads of general use. Petroleum-based bitumen binders. The method of determining the low temperature properties using dynamic shear rheometer (DSR)
GOST ISO 5530-1-2013 Wheat flour. Physical characteristics of doughs. Part 1. Determination of water absorption and rheological properties using farinograf
GOST R 51409-1999 Wheat flour. Physical characteristics of doughs. Determination of rheological properties using an extensograph
GOST R 51415-1999 Wheat flour. Physical characteristics of doughs. Determination of rheological properties using a alveograph
PNST 190-2017 Freight cars. Method of dynamic tests for impact on track with the use of strain-gauge-based wheelset
GOST R 54331-2011 Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear. Specifications
GOST R 55421-2013 General use highways. Emulsion bitumen road cationic. Method for determination of apparent viscosity
GOST R 51404-1999 Wheat flour. Physical characteristics of doughs. Determination of water absorption and rheological properties using a farinograph

AENOR, When the rheometer is used

UNE-ISO 4575:2014 Plastics. Poly(vinyl chloride) pastes. Determination of apparent viscosity using the Severs rheometer
UNE-EN ISO 2431:2012 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
UNE-EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012)
UNE-EN ISO 5530-1:2015 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2013)
UNE 55522:1991 SURFACE ACTIVE AGENTS. DETERMINATION OF RHEOLOGICAL BEHAVIOUR USING A ROTATIONAL VISCOMETER.
UNE-EN 62770:2014 Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment
UNE-EN 60296:2012 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
UNE-EN ISO 9396:2001 Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus. (ISO 9396:1997)
UNE-EN 16345:2012 Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer

American Society of Mechanical Engineers (ASME), When the rheometer is used

ASME MFC-18M-2001 Measurement of Fluid Flow Using Variable Area Meters
ASME MFC-18M-2001(R2016) Measurement of Fluid Flow using Variable Area Meters
ASME MFC-5.1-2011(R2018) Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
ASME PTC 19.5-1972 Application, Part II of fluid meters: Interim supplement on instruments and apparatus
ASME SEC III D1 NH NMA T-2003 Appendix T Rules for Strain, Deformation, and Fatigue Limits at Elevated Temperatures

British Standards Institution (BSI), When the rheometer is used

19/30387856 DC BS EN 17408. Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
20/30406602 DC BS ISO 11443. Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
BS ISO 11443:2021 Tracked Changes. Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
BS ISO 13145:2023 Rubber. Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
BS EN ISO 2431:2019 Paints and varnishes. Determination of flow time by use of flow cups
BS ISO 4575:2007 Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity using the Severs rheometer
BS DD CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode
DD CEN/TS 15325:2008 Bitumen and bituminous binders. Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode
BS EN ISO 5530-1:2014 Wheat flour. Physical characteristics of doughs. Determination of water absorption and rheological properties using a farinograph
BS ISO 6721-10:2001 Plastics - Determination of dynamic mechanical properties - Complex shear viscosity using a parallel-plate oscillatory rheometer
BS ISO 11443:2014 Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
20/30374680 DC BS EN ISO 5530-2. Wheat flour. Physical characteristics of doughs - Part 2. Determination of rheological properties using an extensograph
DD ISO/TS 24154:2005 Hydrometry. Measuring river velocity and discharge with acoustic Doppler profilers
BS ISO/TR 12765:1998 Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
BS 4317-22:1989 Methods of test for cereals and pulses. Determination of water absorption of flour and rheological properties of doughs using a valorigraph
BS EN ISO 4490:2014 Metallic powders. Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
BS EN ISO 4490:2008 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
BS DD ISO/TS 24154:2006 Hydrometry - Measuring river velocity and discharge with acoustic Doppler profilers
BS 5857-1.5:1980 Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of water flow. Transit time method using radioactive tracers
BS EN 17643:2022 Bitumen and bituminous binders. Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR). BTSV test
20/30374677 DC BS EN ISO 5530-1. Wheat flour. Physical characteristics of doughs - Part 1. Determination of water absorption and rheological properties using a farinograph
21/30423946 DC BS EN 17643. Bitumen and bituminous binders. Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR). BTSV test
BS ISO 6721-10:2015 Tracked Changes. Plastics. Determination of dynamic mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer
BS ISO/TR 12765:1999 Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
BS EN 17408:2020 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
BS 5857-2.4:1980 Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of gas flow. Transit time method using radioactive tracers
BS ISO 14934-2:2013 Fire tests. Calibration and use of heat flux meters. Primary calibration methods
DD CEN/TS 15324:2008 Bitumen and bituminous binders. Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
23/30441174 DC BS ISO 6996. Bunkering. Meter verification using master Coriolis mass flow meter
BS ISO 23048:2018 Ships and marine technology. Verification method for portable power measurement using a strain gauge
22/30441875 DC BS EN 62770. Fluids for electrotechnical applications. Unused natural esters for transformers and similar electrical equipment
BS 4317-21:1999 Methods of test for cereals and pulses - Determination of rheological properties of doughs using an extensograph
BS ISO 22007-7:2023 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient measurement of thermal effusivity using a plane heat source
BS EN 16345:2012 Bitumen and bituminous binders. Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer

IN-BIS, When the rheometer is used

ZA-SANS, When the rheometer is used

SANS 60044-8:2004 Instrument transformers Part 8: Electronic current transformers
SANS 60044-6:2004 Instrument transformers Part 6: Requirements for protective current transformers for transient performance
SANS 60044-1:2003 Instrument transformers Part 1: Current transformers
SANS 10361:2000 Textile floor coverings - Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers

Canadian Standards Association (CSA), When the rheometer is used

CSA C60044-6-07-CAN/CSA-2007 Transformateurs de mesure ?Partie 6 : Prescriptions concernant les transformateurs de courant pour protection pour la r閜onse en r間ime transitoire premi鑢e 閐ition,
CSA C60044-8-07-CAN/CSA-2007 Instrument transformers ?Part 8: Electronic current transformers First Edition

工业和信息化部/国家能源局, When the rheometer is used

JB/T 13150-2017 Non-destructive testing instrument Eddy current detector with variable array probe

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., When the rheometer is used

ASHRAE PH-97-9-1-1997 Concentration Shift When Using Refrigerant Mixtures
ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 4155-1998 Advanced Feedback Control of Indoor Air Quality Using Real-Time Computational Fluid Dynamics

Danish Standards Foundation, When the rheometer is used

DS/EN ISO 2431:2012 Paints and varnishes - Determination of flow time by use of flow cups
DS/CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode
DS/ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
DS/ISO 5530-1:2013 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph
DS-håndbog 116.3.6:2021 Using frequency converters and guidance in leakage currents and stray currents – What is the meaning?
DS/EN ISO 9396:2000 Plastics - Phenolic resins - Determination af the gel time at a given temperature using automatic apparatus
DS/CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode
DS/EN 60296:2012 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
DS/ISO 11843-3:2003 Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
DS/EN 16345:2013 Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer

ES-UNE, When the rheometer is used

UNE-EN ISO 2431:2020 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09)
UNE-EN 17643:2023 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a dynamic shear rheometer (DSR) - BTSV test
UNE-EN 17408:2021 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry

European Committee for Standardization (CEN), When the rheometer is used

PD CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode
FprEN ISO 5530-2 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/FDIS 5530-2:2021)
prEN 17643-2021 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test
EN 1110:2010 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature
FprEN ISO 5530-1:2021 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO/FDIS 5530-1:2021)
FprEN ISO 5530-1 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO/FDIS 5530-1:2021)

International Electrotechnical Commission (IEC), When the rheometer is used

IEC 61869-2:2012/ISH1:2022 Instrument transformers - Part 2: Additional requirements for current transformers
IEC 61869-2:2012 Instrument transformers - Part 2: Additional requirements for current transformers
IEC 60044-1:2003 Instrument transformers - Part 1: Current transformers
IEC 61869-14:2018 Instrument transformers - Part 14: Additional requirements for current transformers for DC applications
IEC TR 62543:2011/AMD1:2013 Amendment 1 - High-voltage direct current (HVDC) power transmission using voltage sourced converters (VSC)
IEC 61869-15:2018 Instrument transformers - Part 15: Additional requirements for voltage transformers for DC applications
IEC 62770:2013 Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment
IEC 62089:2001 Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters
IEC 61243-1:2003+AMD1:2009 CSV Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.

未注明发布机构, When the rheometer is used

DIN EN ISO 2431:1996 Determination of flow time of paints and varnishes by use of flow cups
BS ISO 11483-3:2003 Capability of detection — Part 3 : Methodology for determination of the critical value for the response variable when no calibration data are used

Indonesia Standards, When the rheometer is used

SNI 13-6664-2002 Determination of rock mass deformation modulus by probex-1 dilatometers

CZ-CSN, When the rheometer is used

CSN 67 3013-1980 Paints and varnishes. Determination of flow time by use of flow cup

AT-ON, When the rheometer is used

ONORM EN 535-1992 Paints and varnishes — Determination of flow time by use of flow cups
OENORM EN 17643-2021 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test

VN-TCVN, When the rheometer is used

TCVN 7848-2-2015 Wheat flour - Physical characteristics of doughs .Part 2:Determination of rheological properties using an extensograph
TCVN 7848-1-2015 Wheat flour - Physical characteristics of doughs .Part 1:Determination of water absorption and rheological properties using a farinograph

HU-MSZT, When the rheometer is used

MSZ 9631-1958

Professional Standard - Electricity, When the rheometer is used

DL/T 2043-2019 Technical conditions for use of ±1100kV UHV DC converter transformers
DL/T 2003-2019 Guidelines for the use of on-load tap-changers for converter transformers

KR-KS, When the rheometer is used

KS M ISO 11443-2017 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS M 2458-2023 Petroleum products and related products — Determination of multiple stress creep and recovery (MSCR) of asphalt using a dynamic shear rheometer

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, When the rheometer is used

GB/T 33095.1-2016 Rubber, unvulcanized—Measurement of rheological properties using rotorless shear rheometer— Part 1: Frequency sweep
GB/T 33061.10-2016 Plastics—Determination of dynamic mechanical properties—Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, When the rheometer is used

GB/T 25278-2010 Plastics.Determination of the fluidity of plastics using capillary and slit-die rheometers
GB/T 17950-2000 Semiconductor converter-Part 6:Application guide for the protection of semiconductor converters against overcurrent by fuses
GB/T 21989-2008 Plastics.Poly(vinyl chloride)pastes.Determination of apparent viscosity using the Severs rheometer
GB/T 41940-2022 Rubber—Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
GB 2536-2011 Fluids for electrotechnical applications.Unused mineral insulating oils for transformers and switchgear

GOSTR, When the rheometer is used

GOST R 57995-2017 Composite polymers. Determination of curing behavior of thermosetting resins by dynamic mechanical procedures using a rheometer
GOST R 58400.8-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method of determining the flexural creep stiffness at subzero temperatures using the bending beam rheometer (BBR)
GOST R 58400.10-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method for determination of the properties using a dynamic shear rheometer (DSR)
GOST R 58400.9-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method for determination of low temperature properties using dynamic shear rheometer (DSR)

ESDU - Engineering Sciences Data Unit, When the rheometer is used

SPB-M4-1-2007 Interfacial and rheological properties of asphaltenes investigated using AFM
SPB-M11-1-2010 Apr.09: Interactions and Rheological Properties of Asphaltenes Investigated using AFM
ESDU 85009 A-2007 Fluid transients in pipes. Use of air inlet/outlet valves as surge suppression devices.
ESDU 85009-1985 FLUID TRANSIENTS IN PIPES Use of air inlet/outlet valves as surge suppression devices
SPB-M6-1-2010 Apr.08: Interfacial and Rheological Properties of Asphaltenes Investigated using AFM
ESDU 85044-1985 FLUID TRANSIENTS IN PIPES Pressure surge following booster pump trip. Suppression using pump bypass
ESDU 85044 A-2007 Fluid transients in pipes. Pressure surge following booster pump trip. Suppression using pump bypass.

IETF - Internet Engineering Task Force, When the rheometer is used

RFC 8038-2017 Exporting MIB Variables Using the IP Flow Information Export (IPFIX) Protocol
RFC 4383-2006 The Use of Timed Efficient Stream Loss-Tolerant Authentication (TESLA) in the Secure Real-time Transport Protocol (SRTP)

Institute of Electrical and Electronics Engineers (IEEE), When the rheometer is used

IEEE Std 1246-2020 IEEE Guide for Temporary Protective Grounding Systems Used in Substations - Redline
IEEE 2745.2-2021 Guide for Technology of Unified Power Flow Controller Using Modular Multilevel Converter—Part 2: Terminology
P2745.1/D4+1, April 2019 IEEE Draft Guide for Technology of Unified Power Flow Controller Using Modular Multilevel Converter: Part 1 Functions

American National Standards Institute （ANSI), When the rheometer is used

ANSI/ASTM D2538:1995 Test Method for Fusion of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer (08.02)

SE-SIS, When the rheometer is used

SIS SS-ISO 2874:1988 Packaging — Complete, filled transport packages — Stacking test using compression tester

Standard Association of Australia （SAA）, When the rheometer is used

AS 1580.401.3:2002(R2013)

NL-NEN, When the rheometer is used

NEN 3947-1982 Bitumen and tar products Determination of flow time by the ISO and DIN cup

API - American Petroleum Institute, When the rheometer is used

API H00008-2002 Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology (First Edition)

European Committee for Electrotechnical Standardization（CENELEC）, When the rheometer is used

EN 62770:2014 Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment
EN 60296:2012 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear

Society of Automotive Engineers (SAE), When the rheometer is used

SAE AIR1387C-2003 Designing with Elastomers for Use at Low Temperatures, Near or Below Glass Transition
SAE AIR6334-2020 A Guide to Extending Times Between Overhaul for Rotorcraft Power Train Transmissions Using Monitoring Data

国家能源局, When the rheometer is used

NB/T 10199-2019 Electrical fluids, unused natural esters for transformers and similar electrical equipment

BE-NBN, When the rheometer is used

NBN E 17-005-1988

(U.S.) Ford Automotive Standards, When the rheometer is used

FORD WSK-M4D604-A-2006 POLYPROPYLENE (PP), COPOLYMER, CONTROLLED RHEOLOGY (CR) GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D638-B)
FORD WSS-M2C949-A-2014 FLUID, ULTRA LOW VISCOSITY (ULV) AUTOMATIC TRANSMISSION ***TO BE USED WITH FORD WSS-M99P1111-A***

North Atlantic Treaty Organization Standards Agency, When the rheometer is used

STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER

NATO - North Atlantic Treaty Organization, When the rheometer is used

AFLP-3713-2014 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE ANALYSER (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (

TR-TSE, When the rheometer is used

TS 2950-1978 Measurement Of Water Flow In Closed Conduits - Tracer Methods Part III: Constant Rate Injection Method Using Radioactive Tracers

Jiangsu Provincial Standard of the People's Republic of China, When the rheometer is used

DB32/T 4227-2022 Safety management and quality control specifications for clinical use of high-flow respiratory humidification therapy equipment

US-FCR, When the rheometer is used

FCR COE ER 37-1-2-1974 USE OF STATISTICAL SAMPLING TECHNIQUES IN THE EXAMINATION OF DISBURSEMENT VOUCHERS OF LESS THAN $750, REPRINT INCORPORATES CHANGE 1-2