ZH
RU
ES

Sieve particle size

Sieve particle size, Total:460 items.

In the international standard classification, Sieve particle size involves: Powder metallurgy, Fuels, Particle size analysis. Sieving, Geology. Meteorology. Hydrology, Soil quality. Pedology, Metalliferous minerals, Non-metalliferous minerals, Paints and varnishes, Linear and angular measurements, Coals, Analytical chemistry, Products of the chemical industry, Cork and cork products, Animal feeding stuffs, Cutting tools, Plastics, Tea. Coffee. Cocoa, Fertilizers, Construction materials, Farm buildings, structures and installations, Road engineering, Air quality, Refractories, Optoelectronics. Laser equipment, Testing of metals, Aids for disabled or handicapped persons, Non-ferrous metals, Protection against dangerous goods, Ferroalloys, Inorganic chemicals, Ceramics, Cereals, pulses and derived products, Optical equipment, Environmental protection, Earthworks. Excavations. Foundation construction. Underground works, Equipment for the chemical industry, Raw materials for rubber and plastics, Civil engineering in general.

SE-SIS, Sieve particle size

SIS SS 02 71 23-1992 Geotechnical tests — Particle size distribution — Sieving
SIS SS 13 21 23-1983 Concrete testing - Aggregate - Particle size distribution by sieving
SIS SS 13 21 12-1978 Concrete testing — Aggregate — Particle size distribution
SIS SS 02 71 24-1992 Geotechnical tests — Particle size distribution — Sedimentation, hydrometer method

AENOR, Sieve particle size

UNE 103101:1995 PARTICLE SIZE ANALYSIS OF A SOIL BY SCREENING.
UNE-EN 24497:1999 METALLIC POWDERS. DETERMINATION OF PARTICLE SIZE BY DRY SIEVING. (ISO 4497:1983).
UNE-EN 933-2:1996 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. TEST SIEVES, NOMINAL SIZE OF APERTURES.
UNE-EN 933-2/1M:1999 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. TEST SIEVES, NOMINAL SIZE OF APERTURES.
UNE 56918:1990 GRANULATED CORK. SIZE ANALISYS BY MECHANICAL SIEVING.
UNE-EN 15415-1:2012 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
UNE-EN 12948:2011 Liming materials - Determination of size distribution by dry and wet sieving
UNE 53014:2012 Plastic materials. Determination of particle size and its distribution
UNE 34232:1981 SODIUM CHLORIDE USED AS TABLE SALT. DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY MECHANICAL SIEVING.
UNE-EN ISO 8130-1:2011 Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:1992)
UNE-EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
UNE-CEN/TR 15149-3:2015 IN Solid biofuels - Determination of particle size distribution - Part 3: Rotary screen method

Korean Agency for Technology and Standards (KATS), Sieve particle size

KS D ISO 4497:2019 Metallic powders — Determination of particle size by dry sieving
KS E ISO 728:2002 Coke(nominal top size greater than 20 mm)－Size analysis by sieving
KS E ISO 4701:2009 Iron ores and direct reduced iron－Determination of size distribution by sieving
KS E ISO 728:2022 Coke — Size analysis by sieving
KS M ISO 2030:2004 Granulated cork－Size analysis by mechanical sieving
KS M ISO 23202-2016(2021) Aluminium oxide used for the production of aluminium－Determination of particles passing a 20 micrometer aperture sieve
KS E ISO 1953:2002 Hard coal－Size analysis by sieving
KS M ISO 2030:2020 Granulated cork — Size analysis by mechanical sieving
KS E ISO 6230:2003 Manganese ores－Determination of size distribution by sieving
KS A ISO 9276-2-2014(2019) Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS M 5976-1-1999
KS M 1425-2004 Testing method for particle size distribution of palletized media by sieving
KS P ISO 17190-3-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 3：Determination of particle size distribution by sieve fractionation
KS M ISO 8130-1:2008 Coating powders－Part 1：Determination of particle size distribution by sieving
KS M ISO 8130-1:2019 Coating powders — Part 1: Determination of particle size distribution by sieving
KS P ISO 17190-3:2011 Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 3：Determination of particle size distribution by sieve fractionation
KS E ISO 2325:2002 Coke－Size analysis(Nominal top size 20 mm or less)
KS M 1425-2004(2010) Testing method for particle size distribution of palletized media by sieving
KS E ISO 4701:2020 Iron ores and direct reduced iron —Determination of size distribution by sieving
KS A 0095-2007 Determination of particle size distribution by the weight of sedimentation in liquid
KS M 1425-2013 Testing method for particle size distribution of palletized media by sieving
KS M ISO 2926:2010 Aluminium oxide primarily used for the production of aluminium-Particle size analysis for the range 45μm to 150μm - Method using electroformed sieves
KS M ISO 8220:2003 Aluminium oxide primarily used for the production of aluminium-Determination of the fine particle size distribution (less than 60 ㎛)-Method using electroformed sieves
KS I 2215-2011 Measuring method for particle-size distribution of dusts in flue gas

KR-KS, Sieve particle size

KS D ISO 4497-2019 Metallic powders — Determination of particle size by dry sieving
KS E ISO 728-2022 Coke — Size analysis by sieving
KS E ISO 1953-2018(2023) Hard coal — Size analysis by sieving
KS M ISO 23202-2016 Aluminium oxide used for the production of aluminium－Determination of particles passing a 20 micrometer aperture sieve
KS M ISO 2030-2020 Granulated cork — Size analysis by mechanical sieving
KS M ISO 8130-1-2019 Coating powders — Part 1: Determination of particle size distribution by sieving
KS E ISO 4701-2020 Iron ores and direct reduced iron —Determination of size distribution by sieving

International Organization for Standardization (ISO), Sieve particle size

ISO 4497:2020 Metallic powders — Determination of particle size by dry sieving
ISO 8876:1989 Fluorspar; determination of particle size distribution by sieving
ISO 19430:2016 Particle size analysis - Particle tracking analysis (PTA) method
ISO 6230:1989 Manganese ores; determination of size distribution by sieving
ISO/DIS 1953:2022 Hard coal — Size analysis by sieving
ISO 2030:1990 Granulated cork; size analysis by mechanical sieving
ISO 2030:2018 Granulated cork - Size analysis by mechanical sieving
ISO 21501-1:2009 Determination of particle size distribution - Single particle light interaction methods - Part 1: Light scattering aerosol spectrometer
ISO 728:1974 Title missing - Legacy paper document
ISO 1953:1994 Hard coal - Size analysis by sieving
ISO 1953:2015 Hard coal - Size analysis by sieving
ISO 728:2021 Coke - Size analysis by sieving
ISO 9284:1992 Abrasive grains; test-sieving machines
ISO 9284:2013 Abrasive grains - Test-sieving machines
ISO 4150:1980 Green coffee — Size analysis — Manual sieving
ISO 4701:1999 Iron ores - Determination of size distribution by sieving
ISO 4150:1991 Green coffee; size analysis; manual sieving
ISO 8876:1989/Cor 1:1991 Flourspar; determination of particle size distribution by sieving; technical corrigendum 1
ISO 728:1995 Coke (nominal top size greater than 20 mm) - Size analysis by sieving
ISO 4701:1985 Iron ores; Determination of size distribution by sieving
ISO 9276-2:2001 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 9276-2:2014 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 17827-2:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below
ISO 2030:1976 Cork — Granulated cork — Size analysis by mechanical sieving
ISO 728:1981 Coke (nominal top size greater than 20 mm); Size analysis
ISO 22412:2017 Particle size analysis - Dynamic light scattering (DLS)
ISO 17190-3:2020 Urine-absorbing aids for incontinence — Polyacrylate superabsorbent powders — Part 3: Test method for determination of the particle size distribution by sieve fractionation
ISO 8130-1:1992 Coating powders; part 1: determination of particle size distribution by sieving
ISO 8130-1:2019 Coating powders — Part 1: Determination of particle size distribution by sieving
ISO 17867:2015 Particle size analysis - Small-angle X-ray scattering
ISO/DIS 19430 Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
ISO 13765-5:2004 Refractory mortars - Part 5: Determination of grain size distribution (sieve analysis)
ISO 5915:1980 Sodium hexafluorosilicate for industrial use; Determination of particle size distribution; Sieving method
ISO 2926:1974 Aluminium oxide primarily used for the production of aluminium; Particle size analysis; Sieving method
ISO 4701:2019 Iron ores and direct reduced iron — Determination of size distribution by sieving
ISO 21501-3:2007 Determination of particle size distribution - Single particle light interaction methods - Part 3: Light extinction liquid-borne particle counter
ISO 4701:2008 Iron ores and direct reduced iron - Determination of size distribution by sieving
ISO 4701:2017 Iron ores and direct reduced iron - Determination of size distribution by sieving
ISO 3118:1976 Sodium perborates for industrial use; Determination of particle size distribution by mechanical sieving
ISO 21501-2:2007 Determination of particle size distribution - Single particle light interaction methods - Part 2: Light scattering liquid-borne particle counter
ISO 17190-3:2001 Urine absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 3: Determination of particle size distribution by sieve fractionation
ISO 8511:1995 Rubber compounding ingredients - Carbon black - Determination of pellet size distribution
ISO 4150:2011 Green coffee or raw coffee - Size analysis - Manual and machine sieving
ISO 21501-4:2007 Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces
ISO 21501-4:2018 Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces
ISO 17827-1:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above

American National Standards Institute （ANSI), Sieve particle size

ANSI/ASTM D1921:2001 Particle Size (Sieve Analysis) of Plastic Materials, Standard Test Method for (08.02)

CZ-CSN, Sieve particle size

CSN 17 6205-1973 Instrument for siftíng
CSN 44 1640-2004 Brown coals - Size analysis by sieving
CSN 25 7698-1976 Grain testers
CSN ISO 8876:1992 Fluorspar - Determination of particle size distribution by sieving
CSN 99 4178-1990 Grain testers. Technical requirements
CSN 99 4179-1990 Grain testers. Methods of verification and calibrating
CSN 44 1704-1981 Non-ferrous ores and concentrates.Determination of size distribution by sieving and sedimentation analysis

Professional Standard - Ocean, Sieve particle size

HY/T 175-2014 Optical suspended sediment particle size analyzer

American Society for Testing and Materials (ASTM), Sieve particle size

ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM UOP422-66 Particle Size Distribution by Micromesh Sieves
ASTM UOP438-81 Attrition of Molecular Sieve Particles
ASTM UOP437-81 Size Distribution of Molecular Sieve Particles
ASTM D5158-98(2013) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM D6933-04 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
ASTM D6933-08 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
ASTM D2862-97(2004) Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-97 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D6913-04 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04(2009) Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM E2651-10 Standard Guide for Powder Particle Size Analysis
ASTM E276-21 Standard Test Method for Particle Size or Screen Analysis at 4.75 mm (No. 4) Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM E1037-15 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM D1921-01 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D1921-96 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D1921-06 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D1921-18 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM UOP854-85 Size Distribution of Solid Phosphoric Acid Catalyst
ASTM E276-03(2008)e1 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM E389-03(2008)e1 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
ASTM E276-13 Standard Test Method for Particle Size or Screen Analysis at No. 4 lpar;4.75-mmrpar; Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM E389-13 Standard Test Method for Particle Size or Screen Analysis at No. 4 lpar;4.75-mmrpar; Sieve and Coarser for Metal-Bearing Ores and Related Materials
ASTM D4749-87 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM UOP333-07 Fines in Catalysts and Catalyst Supports by Sieve Analysis
ASTM D8200-22 Standard Practice for Creating a Correlation to Compare Particle Size Distribution Results of Proppants by Dynamic Imaging Analyzers and Sieves
ASTM E276-03 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM E389-93(1998) Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
ASTM D1001-51 Specification for Sieve Analysis of Granular Mineral Surfacing for Asphalt Roofing and Shingles
ASTM D4513-11 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D1511-10 Standard Test Method for Carbon Black&8212;Pellet Size Distribution
ASTM D4513-97(2006) Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D4513-97 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D4513-97(2001)e1 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D4513-11(2017) Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D4513-22 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D6933-18 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
ASTM D4749-87(2002)e1 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM D4749-87(2002) Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM D4749-87(2012) Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM D6933-22 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
ASTM D4749-87(2007) Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM D6913-04(2009)e1 Standard Test Methods for Particle-Size Distribution 40;Gradation41; of Soils Using Sieve Analysis

British Standards Institution (BSI), Sieve particle size

BS ISO 4701:2008 Iron ores and direct reduced iron. Determination of size distribution by sieving
BS 3900-J2:1993 Methods of test for paints - Testing of coating powders - Determination of particle size distribution of coating powders by sieving
PD CEN/TS 17434:2020 Ambient air. Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
BS ISO 19430:2016 Particle size analysis. Particle tracking analysis (PTA) method
BS 8471:2007 Guide to particle sizing methods
BS ISO 728:2021 Coke. Size analysis by sieving
BS ISO 1953:2015 Hard coal. Size analysis by sieving
BS EN 15149-1:2010 Solid biofuels. Determination of particle size distribution. Oscillating screen method using sieve apertures of 1 mm and above
BS EN 15149-2:2010 Solid biofuels. Determination of particle size distribution. Vibrating screen method using sieve apertures of 3,15 mm and below
18/30332191 DC BS ISO 11277. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS ISO 2030:2018 Granulated cork. Size analysis by mechanical sieving
BS ISO 20977:2018 Liming materials. Determination of size distribution by dry and wet sieving
BS EN 933-2:2020 Tests for geometrical properties of aggregates - Determination of particle size distribution. Test sieves, nominal size of apertures
23/30456345 DC BS ISO 11277 AMD 1. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS 7425-4:1993 Abrasive grains. Specification for test-sieving machines
BS ISO 23202:2006 Aluminium oxide used for the production of aluminium. Determination of particles passing a 20 micrometre aperture sieve
BS DD CEN/TS 15149-1:2006 Solid biofuels - Methods for the determination of particle size distribution - Oscillating screen method using sieve apertures of 3, 15 mm and above
BS EN ISO 17827-2:2016 Solid biofuels. Determination of particle size distribution for uncompressed fuels. Vibrating screen method using sieves with aperture of 3,15 mm and below
BS ISO 13765-5:2006 Refractory mortars - Determination of grain size distribution (sieve analysis)
BS EN ISO 8130-1:1993 Coating powders. Determination of particle size distribution by sieving
BS EN ISO 8130-1:2010 Coating powders. Determination of particle size distribution by sieving
BS ISO 13765-5:2004 Refractory mortars - Determination of grain size distribution (sieve analysis)
BS EN 15415-1:2011 Solid recovered fuels. Determination of particle size distribution. Screen method for small dimension particles
BS ISO 4150:2012 Green coffee or raw coffee. Size analysis. Manual and machine sieving
DD CEN/TS 15415:2006 Solid recovered fuels — Determination of particle size distribution by screen method
19/30377681 DC BS EN 933-2. Tests for geometrical properties of aggregates. Part 2. Determination of particle size distribution. Test sieves, nominal size of apertures
23/30456658 DC BS EN ISO 17827-2 Solid biofuels. Determination of particle size distribution for uncompressed fuels - Part 2. Vibrating screen method using sieves with aperture of 3,15 mm and below
BS ISO 17867:2015 Particle size analysis. Small-angle X-ray scattering
23/30456654 DC BS EN ISO 17827-1 Solid biofuels. Determination of particle size distribution for uncompressed fuels - Part 1. Oscillating screen method using sieves with apertures of 3,15 mm and above
BS ISO 9276-2:2001 Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions
BS ISO 9276-2:2014 Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
BS 812-103.1:1985 Testing aggregates. Method for determination of particle size distribution. Sieve tests
BS EN ISO 8130-1:2019 Tracked Changes. Coating powders. Determination of particle size distribution by sieving
BS EN 933-1:1997 Tests for geometrical properties of aggregates - Determination of particle size distribution - Sieving method
BS EN 933-1:2012 Tests for geometrical properties of aggregates. Determination of particle size distribution. Sieving method
BS EN 933-10:2009 Tests for geometrical properties of aggregates Part 10: Assessment of fines — Grading of filler aggregates (air jet sieving)
BS DD ISO/TS 13762:2002 Particle size analysis - Small angle X-ray scattering method
BS 5663-2:1987 Methods of testing iron ores - Determination of size distribution by sieving
BS PD CEN/TR 15149-3:2014 Solid biofuels. Determination of particle size distribution. Rotary screen method
BS ISO 1304:2006 Rubber compounding ingredients - Carbon black - Determination of iodine adsorption number
BS ISO 1304:2016 Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number
BS EN 12948:2010 Liming materials. Determination of size distribution by dry and wet sieving
BS ISO 8486-1:1997 Bond abrasives. Determination and designation of grain size distribution. Macrogrits F4 to F220
BS ISO 8486-1:1996 Bond abrasives. Determination and designation of grain size distribution. Macrogrits F4 to F220
BS ISO 11277:2010 Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS ISO 11277:2009 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
BS ISO 11277:2020 Tracked Changes. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
DD CEN/TS 15149-1:2006 Solid biofuels — Methods for the determination of particle size distribution — Part 1: Oscillating screen method using sieve apertures of 3,15 mm and above
DD CEN/TS 15149-2:2006 Solid biofuels — Methods for the determination of particle size distribution — Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
BS EN ISO 17827-1:2016 Solid biofuels. Determination of particle size distribution for uncompressed fuels. Oscillating screen method using sieves with apertures of 3,15 mm and above
BS EN 12948:2002 Liming materials - Determination of size distribution by dry and wet sieving
BS DD CEN/TS 15415:2006 Solid recovered fuels - Determination of particle size and particle size distribution by screen method
DD CEN/TS 15149-3:2006 Solid biofuels — Methods for the determination of particle size distribution — Part 3: Rotary screen method

Professional Standard - Coal, Sieve particle size

MT/T 659-1997 GXS Fine Particle Classifying Sieve

ES-UNE, Sieve particle size

UNE-CEN/TS 17434:2020 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 17827-2:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2016)
UNE-EN ISO 17827-1:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016)
UNE-EN 933-2:2022 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
ISO/DIS 17827-1:2023 Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above
ISO/DIS 17827-2:2023 Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below
UNE-EN ISO 8130-1:2020 Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:2019)

German Institute for Standardization, Sieve particle size

DIN CEN/TS 17434:2020-06 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS); German version CEN/TS 17434:2020
DIN 66165-2:1987 Particle size analysis; sieve analysis; procedure
DIN ISO 9284:2014 Abrasive grains - Test-sieving machines (ISO 9284:2013)
DIN ISO 9284:2014-06 Abrasive grains - Test-sieving machines (ISO 9284:2013)
DIN 66165-1:1987 Particle size analysis; sieve analysis; general principles
DIN 66165-2:2016 Particle size analysis - Sieving analysis - Part 2: Procedure
DIN 66165-2:2016-08 Particle size analysis - Sieving analysis - Part 2: Procedure
DIN EN ISO 17827-1:2016-10 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016); German version EN ISO 17827-1:2016 / Note: To be replaced by DI...
DIN EN ISO 17827-2:2016-10 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2016); German version EN ISO 17827-2:2016 / Note: To be replaced by DIN E...
DIN EN 933-2:2020 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
DIN EN 933-2:2020-09 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures; German version EN 933-2:2020
DIN 66165-1:2016 Particle size analysis - Sieving analysis - Part 1: Fundamentals
DIN 66165-1:2022 Particle size analysis - Sieving analysis - Part 1: Fundamentals
DIN 66165-1:2022-06 Particle size analysis - Sieving analysis - Part 1: Fundamentals
DIN 66119:2016 Particle size analysis - Size analysis by air classification with gravitation-counterflow elutriator
DIN 66119:1983 Particle size analysis; size analysis by air classification with gravitation-counterflow elutriator
DIN EN 15149-1:2011 Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above; German version EN 15149-1:2010
DIN EN 15149-2:2011 Solid biofuels- Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below; German version EN 15149-2:2010
DIN EN ISO 17827-2:2023-01 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO/DIS 17827-2:2022); German and English version prEN ISO 17827-2:2022 / Note: Date ...
DIN EN ISO 8130-1:2019-08 Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:2019); German version EN ISO 8130-1:2019
DIN EN ISO 17827-1:2023-01 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO/DIS 17827-1:2022); German and English version prEN ISO 17827-1:2022 / Note: Da...
DIN 52098:2005 Aggregates test methods - Determination of particle size distribution by wet sieving
DIN EN 15415-1:2011-11 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles; German version EN 15415-1:2011
DIN EN 12948:2011-02 Liming materials - Determination of size distribution by dry and wet sieving; German version EN 12948:2010
DIN ISO 9276-2:2018-09 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN ISO 22412:2018 Particle size analysis - Dynamic light scattering (DLS) (ISO 22412:2017)
DIN EN ISO 8130-1:2019 Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:2019)
DIN EN 933-1:2021-07 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method; German and English version prEN 933-1:2021 / Note: Date of issue 2021-06-11*Intended as replacement for DIN EN 933-1 (2012-03).
DIN 53477:2018-09 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
DIN EN 933-1:2012-03 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method; German version EN 933-1:2012 / Note: To be replaced by DIN EN 933-1 (2021-07).
DIN 51938:2015-09 Testing of carbonaceous materials - Determination of particle size distribution by sieving - Solid matters
DIN EN ISO 17827-2:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2016); German version EN ISO 17827-2:2016
DIN ISO 4783-1:1996 Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations - Part 1: Generalities; identical with ISO 4783-1:1989
DIN 51938:1994 Testing of carbon materials; determination of particle size distribution by sieving; solid matters
DIN 22019-1:1985 Investigations of the raw material in hard-coal-mining; determination of the particle-size-distribution 20 Šm by sieve-analysis
DIN 51938:2015 Testing of carbonaceous materials - Determination of particle size distribution by sieving - Solid matters
DIN EN ISO 17827-2:2023 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO/DIS 17827-2:2022); German and English version prEN ISO 17827-2:2022
DIN EN 451-2:1995 Method of testing fly ash - Part 2: Determination of fineness by wet sieving; German version EN 451-2:1994
DIN ISO 9276-2:2018 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN ISO 9276-2:2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2001);English version of DIN ISO 9276-2:2006-02
DIN EN 15415-1:2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles; German version EN 15415-1:2011
DIN EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method; German version EN 933-1:2012
DIN EN 933-1:2006 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method; English version of DIN EN 933-1:1997 + A1:2005
DIN 22019-1:1985-03 Investigations of the raw material in hard-coal-mining; determination of the particle-size-distribution >20 µm by sieve-analysis

Association Francaise de Normalisation, Sieve particle size

NF ISO 9284:2013 Grains abrasifs - Machine à tamiser de contrôle
XP CEN/TS 17434:2020 Air ambiant - Détermination de la distribution granulométrique de particules d'un aérosol atmosphérique à l'aide d'un spectromètre de granulométrie à mobilité électrique (MPSS)
NF ISO 11277:2020 Qualité du sol - Détermination de la répartition granulométrique de la matière minérale des sols - Méthode par tamisage et sédimentation
XP X43-174*XP CEN/TS 17434:2020 Ambient air - Determination of the particle size spectra of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
NF E75-233*NF ISO 9284:2013 Abrasive grains - Test-sieving machines
NF E75-233:1993 Abrasive grains. Test sieving machines
NF M03-040:1995 Hard coal. Size analysis by sieving.
NF V03-308*NF ISO 4150:1991 Green coffee. Size analysis. Manual sieving.
NF ISO 4150:1991 Café vert - Analyse granulométrique - Tamisage manuel.
NF T20-223:1973 Aluminium oxide primarily used for the production of aluminium. Particle size analysis. Sieving method.
NF X11-635:1985 Size analysis-Representation of particle size distributions - Reference models
NF X34-124-1*NF EN ISO 17827-1:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1 : oscillating screen method using sieves with apertures of 3,15 mm and above
NF X34-124-2*NF EN ISO 17827-2:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2 : vibrating screen method using sieves with aperture of 3,15 mm and below
NF EN 12948:2010 Amendements minéraux basiques - Détermination de la distribution granulométrique par tamisage par voie sèche et par voie humide
NF A20-008*NF ISO 4701:1986 Iron ores. Determination of size distribution by sieving.
NF T70-335:1995 Energetic materials for defense. Physical-chemical analysis and properties. Determination of average diameter. Method with the sub-sieve-sizer Fisher.
NF T30-499-1:2011 Coating powders - Part 1 : determination of particle size distribution by sieving.
NF X11-510:1988 Sieves and sieving. Wire gauze with square apertures made from annealed round wire for industrial use. Wire diameters.
NF T30-499-1*NF EN ISO 8130-1:2019 Coating powders - Part 1 : determination of particle size distribution by sieving
NF EN 15415-1:2011 Combustibles solides de récupération - Détermination de la distribution granulométrique - Partie 1 : méthode de criblage pour des particules de petites dimensions
NF P18-622-2:1996 Tests for geometrical properties of aggregates. Part 2 : determination of particle size distribution. Test sieves, nominal size of apertures.
NF X31-516:2007 Qualité du sol - Fractionnement granulodensimétrique des matières organiques particulaires du sol dans l'eau
NF EN ISO 8130-1:2019 Poudres pour revêtement - Partie 1 : détermination de la distribution granulmétrique par tamisage
NF X31-107:2003 Qualité du sol - Détermination de la distribution granulométrique des particules du sol - Méthode à la pipette
NF P94-056:1996 Soil : investigation and testing. Granulometric analysis. Dry sieving method after washing.
NF EN 933-1:2012 Essais pour déterminer les caractéristiques géométriques des granulats - Partie 1 : détermination de la granularité - Analyse granulométrique par tamisage
NF X34-110-1:2010 Solid biofuels - Determination of particle size distribution - Part 1 : oscillating screen method using sieve apertures of 1 mm and above.
NF X34-214-1*NF EN 15415-1:2011 Solid recovered fuels - Determination of particle size distribution - Part 1 : screen method for small dimension particles
NF U44-182*NF EN 12948:2010 Liming materials - Determination of size distribution by dry and wet sieving
XP T47-752:2007 End of Life Tyres (ELF) - Determination of the particle size analysis of granulates issued from End of Life Tyres - Method based on the mechanical sieving of product
NF T45-153*NF ISO 8511:2011 Rubber compounding ingredients - Carbon black - Determination of pellet size distribution
NF T20-218*NF ISO 8220:1987 Aluminium oxide primarilly used for the production of aluminium. Determination of the fine particle size distribution (less than 60 micrometers). Method using electroformed sieves.
NF P12-301*NF EN 1015-1:1999 Methods of test for mortar for masonry. Part 1 : determination of particle size distribution (by sieve analysis).
NF X31-101:1992 SOIL QUALITY. PREPARATION OF SOIL TEST SAMPLE FOR PHYSICO-CHEMICAL ANALYSIS. DRYING, CRUMBLING OF CLODS AND 2 MM SIEVING.
NF P18-622-1:1997 Tests for geometrical properties of aggregates. Part 1 : determination of particle size distribution. Sieving method.
NF X11-642:1982
NF X34-110-2:2010 Solid biofuels - Determination of particle size distribution - Part 2 : vibrating screen method using sieve apertures of 3,15 mm and below.
NF P18-622-1/A1:2006 Tests for geometrical properties of aggregates - Part 1 : determination of particle size distribution - Sieving method.
NF ISO 20977:2019 Amendements minéraux basiques - Détermination de la distribution granulométrique par tamisage à sec ou à l'état humide
NF EN 1015-1:1999 Méthodes d'essai des mortiers pour maçonnerie - Partie 1 : détermination de la répartition granulométrique (par tamisage).
NF EN 1015-1/A1:2007 Méthodes d'essai des mortiers pour maçonnerie - Partie 1 : détermination de la répartition granulométrique (par tamisage)

VN-TCVN, Sieve particle size

TCVN 251-2007 Hard coal.Size analysis by sieving
TCVN 4777-1989 Ores and concentrates of non-ferrous metals.Method of sieve and sedimentary analysis for determination of particle size
TCVN 5225-2007 Coke (nominal top size greater than 20 mm).Size analysis by sieving
TCVN 4807-2013 Green coffee or raw coffee.Size analysis.Manual and machine sieving
TCVN 6862-2012 Soil quality.Determination of particle size distribution in mineral soil material.- Method by sieving and sedimentationMethod by sieving and sedimentation

ES-AENOR, Sieve particle size

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sieve particle size

GB/T 6288-1986 Determination of particle size for granular molecular sieve
GB 6288-1986 Determiantion of particle size for granular molecular sieve
GB/T 5917.1-2008 Determination of feed particle size.Two.sieve screening method
GB/T 31313-2014 Fluorspar.Determination of particle size distribution by sieving
GB/T 21843-2008 Plastics.Vinyl chloride homopolymer and copolymer resins.Particle size determination by mechanical sieving
GB/T 24192-2009 Chromium ores.Determination of particle size by sieving
GB/T 10322.7-2004 Iron ore-Determination of size distribution by sieving
GB/T 43211-2023 Test Method for Particle Size Determination of Softwood Pellets by Mechanical Sieving
GB/T 29653-2013 Manganese ores.Determination of size distribution by sieving
GB/T 1480-2012 Metallic powders.Determination of particle size by dry sieving
GB/T 15445.2-2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distibutions
GB/T 22231-2008 Particle Size Distribution/Fiber Length and Diameter Distribution
GB/T 13220-1991 Determination of particle size distribution of fine powder--Method of sieve classfication with sonic wave
GB/T 2441.7-2001 Determination of Urea Determination of particle size Sieve method
GB/T 3170.1-1982 Determination of particle size of aluminum powder--Mechanical vibration sieve method
GB/T 3170.2-1982 Determination of particle size of aluminum powder--Manual-air-blowing sieve method
GB/T 2441.7-2010 Determination of urea-Part 7: Particle size-Sieve method
GB/T 41949-2022 Particle─Laser particle size analyser─Technical requirements
GB/T 21782.1-2008 Coating powders.part1: Determination of particle size distribution by sieving
GB/T 1480-1995 Determination of particle size for metallic powders--Dry sieving
GB/T 21524-2008 Particle size determination of inorganic chemical products.Sieving method
GB/T 20732-2006 Optical fiber diameter analyser
GB/T 22459.5-2008 Refractory mortars.Part 5:Determination of grain size distribution(sieve analysis)
GB/T 10322.7-2016 Iron ores and direct reduced iron.Determination of size distribution by sieving
GB/T 20405.3-2006 Urine-absorbing aids for incontinence. Test methods for characterizing Polymer-based absorbent materials. Part 3: Determination of particle size distribution by sieve fractionation
GB/T 4108-1983 Magnesium powders and aluminum-magnesium alloy powders--Determination of particle size by dry sieving method
GB/T 4108-2004 Magnesium powder and aluminium-magnesium alloy powder determination of particle size-Dry sieving method

国家市场监督管理总局、中国国家标准化管理委员会, Sieve particle size

GB/T 6288-2021 Determination of particle size for granular molecular sieve
GB/T 22459.5-2022 Refractory mortars—Part 5: Determination of grain size distribution ( sieve analysis )

BE-NBN, Sieve particle size

NBN-ISO 2030:1992 Granulated cork. Size analysis by mechanical sieving
NBN-ISO 2066:1992 Expanded pure agglomerated cork. Determination of moisture content
NBN T 03-421-1983 Aluminium oxide primarily used for the production of aluminium - Particle size analysis - Sieving method
NBN T 03-531-1983 Sodium hexafluorosilicate for industrial use - Determination of particle size distribution - Sieving method
NBN T 03-353-1981 Sodium perborates for industrial use - Determination of particle size distribution by mechanical sieving
NBN T 03-426-1988 Aluminium oxide primarily used for the production of aluminium - Determination of the fine particle size distribution (less than 60 u.m) - Method using electroformed sieves

Danish Standards Foundation, Sieve particle size

DS/ISO 1953:1994 Hard coal - Size analysis by sieving
DS/EN 933-2:1999 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
DS/EN ISO 8130-1:2011 Coating powders - Part 1: Determination of particle size distribution by sieving
DS/ISO 15900:2020 Determination of particle size distribution – Differential electrical mobility analysis for aerosol particles
DS/EN 15415-1:2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
DS/EN 12948:2011 Liming materials - Determination of size distribution by dry and wet sieving
DS/EN 15149-1:2011 Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above
DS/EN 15149-2:2011 Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
DS/EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
DS/CEN/TS 15149-3:2006 Solid biofuels - Methods for the determination of particle size distribution - Part 3: Rotary screen method

API - American Petroleum Institute, Sieve particle size

API PUBL 332-1995 Comparison of Screening Values from Selected Hydrocarbon Screening Instruments

European Committee for Standardization (CEN), Sieve particle size

EN 15149-1:2010 Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above
EN 15149-2:2010 Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
EN ISO 17827-2:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3@15 mm and below
EN ISO 17827-1:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3@15 mm and above
prEN ISO 17827-2 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO/DIS 17827-2:2022)
prEN ISO 17827-1 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO/DIS 17827-1:2022)
EN ISO 8130-1:2010 Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:1992)
EN 12948:2010 Liming materials - Determination of size distribution by dry and wet sieving
prEN 933-1-2021 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
PD CEN/TR 15149-3:2014 Solid biofuels - Determination of particle size distribution - Part 3: Rotary screen method
prEN 933-1-1992 Tests for geometrical properties of aggregates; part 1: determination of particle size distribution; granulometric analysis (sieving method)

RU-GOST R, Sieve particle size

GOST 32989.1-2014 Solid biofuels. Determination of particle size distribution. Part 1. Oscillating screen method using sieve apertures of 1 mm and above
GOST 32989.2-2014 Solid biofuels. Determination of particle size distribution. Part 2. Vibrating screen method using sieve apertures of 3,15 mm and below
GOST 5954.2-1991 Coke. Size analysis (Nominal top size 20 mm or less)
GOST 25469-1993 Alumina. Sieve method for the determination of particle size distribution
GOST 2093-1982 Solid fuel. Size analysis
GOST ISO 13765-5-2017 Refractory mortars. Determination of grain size distribution (sieve analysis)
GOST R 8.896-2015 State system for ensuring the uniformity of measurements. Laser analyzers of particle size. Verification procedure
GOST ISO 11286-2014 Tea. Classification by particle size analysis
GOST 5954.1-1991 Coke. Sieve analysis (nominal top size greater than 20 mm)
GOST 18318-1994 Metallic powders. Determination of particle size by dry sieving
GOST 18318-1973 Metal powders. Method of sieve analysis
GOST R 55566-2013 Solid recovered fuels. Determination of particle size distribution. Part 1. Screen method for small dimension particles
GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
GOST 24236-1980 Manganese ores, concentrates and agglomerates. Determination of size distribution by sieving
GOST ISO 8511-2013 Rubber compounding ingredients. Carbon black. Determination of pellet size distribution
GOST 24598-1981 Ores and concentrates of non-ferrous metals. Size analysis and sedimentation methods for the determination of size distribution

NZ-SNZ, Sieve particle size

AS/NZS 4521:1997 Abrasive Grains - Test-Sieving Machines (ISO 9284: 1992)

The American Road & Transportation Builders Association, Sieve particle size

AASHTO T 27-2011 Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates
AASHTO T 27-2014 Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates

AASHTO - American Association of State Highway and Transportation Officials, Sieve particle size

T 27-2014 Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates
T 27-2006 Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates
T 27-2011 Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates
T27-1993 Standard Specification for Sieve Analysis of Fine and Coarse Aggregates (Eighteenth Edition; ASTM C136-84a)
T27-1997 Standard Specification for Sieve Analysis of Fine and Coarse Aggregates (Nineteenth Edition; ASTM C136-95a)

PL-PKN, Sieve particle size

PN C04424-1970 Pigmen?? Determination ot particie size ditlribution
PN-EN 933-2-2021-01 E Tests for geometrical properties of aggregates -- Part 2: Determination of particle size distribution -- Test sieves, nominal size of apertures
PN Z04097 Arkusz 07-1974 Air purity protection Tests for size composition of dust Sieve analysis
PN C04424-02-1985 Pigments Determination of particie size distribution Microscopic method-simple
PN C04424-04-1985 Pigments Determination of particie size distribution Filtration on filter paper
PN C04424-06-1987 Rgments Determination of particie sizedistribution Grindometric method

Professional Standard - Machinery, Sieve particle size

JB/T 7141-2007 Test methods for pellet separator
JB/T 7141-1993 Pellet feed grading sieve test method
JB/T 10556-2006 Optical fibre diameter analyser

Japanese Industrial Standards Committee (JISC), Sieve particle size

JIS M 8706:1996 Iron ores -- Determination of size distribution by sieving
JIS K 7369:2009 Plastics -- Polyvinyl chloride homopolymer and copolymer resins -- Determination of particle size by mechanical sieving
JIS Z 8826:2005 Particle size analysis -- Photon correlation spectroscopy
JIS R 1639-1:1999 Test methods of properties of fine ceramic granules Part 1: Size distribution of granules
JIS M 8706:2022 Iron ores and direct reduced iron -- Determination of size distribution by sieving
JIS M 8706:2008 Iron ores and direct reduced iron -- Determination of size distribution by sieving
JIS M 8706:2015 Iron ores and direct reduced iron -- Determination of size distribution by sieving
JIS Z 8819-2:2001 Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
JIS Z 8820:1990 General rules for the determination of particle size distribution by sedimentation in liquid

IN-BIS, Sieve particle size

IS 460 Pt.3-1985

未注明发布机构, Sieve particle size

BS ISO 23202:2006(2007) Aluminium oxide used for the production of aluminium — Determination of particles passing a 20 micrometre aperture sieve
DIN EN 933-1:1997 Test for geometrical properties of aggregates — Part 1: Determination of particle size distribution — Granulometric analysis, Sieving method
BS ISO 13765-5:2005 Refractory mortars — Part 5 : Determination of grain size distribution (sieve analysis)
NF P18-622-1*NF EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1 : determination of particle size distribution - Sieving method.
BS 812-103.1:1985(1998) Testing aggregates — Part 103 : Methods for determination of particle size distribution — Section 103.1 Sieve tests

Indonesia Standards, Sieve particle size

SNI 13-4702-1998 Determination of grain size of coal by sieving equipment
SNI ISO 13765-5:2010 Refractory Mortars-Part 5: Determination of grain size distribution (sieve analysis)

GOSTR, Sieve particle size

GOST 5954.2-2020 Coke. Size analysis nominal top size 20 mm or less
GOST 5954.1-2020 Coke. Sieve analysis (nominal top size greater than 20 mm)

Professional Standard - Agriculture, Sieve particle size

GB/T 2448-1991 Determination of urea particle size by sieving method

CEN - European Committee for Standardization, Sieve particle size

PREN 933-2-2019 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves@ nominal size of apertures
PD CEN/TS 15415:2006 Solid recovered fuels - Determination of particle size distribution by screen method
EN ISO 8130-1:2019 Coating powders - Part 1: Determination of particle size distribution by sieving
PD CEN/TS 15149-3:2006 Solid biofuels Methods for the determination of particle size distribution Part 3: Rotary screen method
PD CEN/TS 15149-1:2006 Solid biofuels Methods for the determination of particle size distribution Part 1: Oscillating screen method using sieve apertures of 3@15 mm and above
PD CEN/TS 15149-2:2006 Solid biofuels Methods for the determination of particle size distribution Part 2: Vibrating screen method using sieve apertures of 3@15 mm and below

Lithuanian Standards Office , Sieve particle size

LST EN 933-2-2001 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
LST EN 15415-1-2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
LST EN 12948-2011 Liming materials - Determination of size distribution by dry and wet sieving
LST EN 15149-2-2011 Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
LST EN 15149-1-2011 Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above
LST EN ISO 8130-1:2011 Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:1992)
LST EN 933-1-2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method

Association of German Mechanical Engineers, Sieve particle size

VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer

农业农村部, Sieve particle size

NY/T 3979-2021 Green coffee particle size analysis manual and mechanical screening

PK-PSQCA, Sieve particle size

PS 282-1963 METHOD OF TEST FOR AMOUNT OF MATERIAL FINER THAN No. 200 BS SIEVE IN AGGREGATES

Taiwan Provincial Standard of the People's Republic of China, Sieve particle size

CNS 11776-1986 Method of Test for Particle-Size Analysis of Soils

Professional Standard - Petroleum, Sieve particle size

SY/T 6542-2003 Core particle sizer

National Metrological Verification Regulations of the People's Republic of China, Sieve particle size

JJG 167-2020 Laser particle size distribution analyzer

Malaysia Standards, Sieve particle size

MS 396-1976

Professional Standard - Ferrous Metallurgy, Sieve particle size

YB/T 4392.3-2014 Sulphat titanium slag.Determination of particle size.Mechanical sieving method

AT-ON, Sieve particle size

ONORM M 1157-3-1994 Testing methods for foundry sands - Determination of grain size distribution (sieve grading)
OENORM EN 933-1-2021 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method

Standard Association of Australia （SAA）, Sieve particle size

AS 1141.11.1:2009/Amdt 1:2011
AS 3706.7:2014
AS 1141.11:1996 Methods for sampling and testing aggregates - Particle size distribution by sieving
AS 1141.11.1:2009 Methods for sampling and testing aggregates Method 11.1: Particle size distribution—Sieving method
AS 1141.11.1:2020 Methods for sampling and testing aggregates, Method 11.1: Particle size distribution — Sieving method
AS 1141.19:1998 Methods for sampling and testing aggregates - Fine particle size distribution in road materials by sieving and decantation

YU-JUS, Sieve particle size

JUS B.B8.036-1982 Crushed aggregate. Determination of fine particles with the wet sieve analysis
JUS K.F0.003-1989 Grains of fuse? a luminJuri oxide and silicon carbide for abrasive products. Descrlptlon of tbe sleving macbines
JUS K.F0.081-1989 Grains of diamond and cubic boroo nitri?e for bonded abrasive products. Grain sizes dlstribution and designat ion

RO-ASRO, Sieve particle size

STAS SR ISO 8130-1:1994 Coating powders - Part 1: Determination of partide size distribution by sieving

Universal Oil Products Company (UOP), Sieve particle size

UOP 333-2010 Fines in Catalysts and Catalyst Supports by Sieve Analysis
UOP 856-2007 PARTICLE SIZE DISTRIBUTION OF POWDERS BY LASER LIGHT SCATTERING

Group Standards of the People's Republic of China, Sieve particle size

T/ZSA 110-2022 Specific surface area and pore size analyzer

Professional Standard - Chemical Industry, Sieve particle size

HG/T 6138-2023 Specific surface area and pore size analyzer

Professional Standard - Commodity Inspection, Sieve particle size

SN/T 1138-2002 Dry sieving test method for particle size composition of metal powders for import and export

TR-TSE, Sieve particle size

TS 1945-1975 ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — PARTICLE S?ZE ANALYSIS — SIEVING METHOD
TS 2565-1977 SODI?M PERBORATES FOR INDUSTRIAL USEDETERMINATION OF PARTICLE S?ZE DISTRIBUTION BY MECHANICAL SIEVING

Military Standard of the People's Republic of China-General Armament Department, Sieve particle size

GJB 771.106-1991 Test methods for gunpowder performance. Screening method for determination of propellant particle size distribution.
GJB 8683.6-2015 Test methods for physical parameters of pyrotechnics Part 6: Particle size determination and screening method

National Metrological Technical Specifications of the People's Republic of China, Sieve particle size

JJF 1211-2008 Calibration Specification for Static Light Scattering Particle Size Analyzers

ZA-SANS, Sieve particle size

SANS 3001-AG1:2009 Civil engineering test methods Part AG1: Particle size analysis of aggregates by sieving

Professional Standard - Non-ferrous Metal, Sieve particle size

YS/T 438.1-2001 Methods for physical performance determination of sandy alumina.Determination of size distribution.Sieving method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Sieve particle size

GJB 5382.6-2005 Test methods of physical parameter for pyrotechnic. Part 6: Determination of particle size. Sieve method

HU-MSZT, Sieve particle size

MSZ KGST 958-1978

CU-NC, Sieve particle size

NC 04-67-1985 Materials Testing. Metallic Powders. Granulometry Analysis by Sieving