ZH
RU
ES

Duplicate wells for detection

Duplicate wells for detection, Total:496 items.

In the international standard classification, Duplicate wells for detection involves: Mining and quarrying, Non-destructive testing, Earth-moving machinery, Shipbuilding and marine structures in general, Gas and steam turbines. Steam engines, Linear and angular measurements, Testing of metals, Mining equipment, Hospital equipment, Welding, brazing and soldering, Fluid storage devices, Protection against dangerous goods, Surface treatment and coating, Fertilizers, Analytical chemistry, Aircraft and space vehicles in general, Reinforced plastics, Textile machinery, Machine tools, Construction industry, Cutting tools, Chipless working equipment, Farming and forestry, Mechanical testing, Telecommunication systems, Machine tool systems, Earthworks. Excavations. Foundation construction. Underground works, Gears, Packaging materials and accessories, Materials and articles in contact with foodstuffs, Refractories, Audio, video and audiovisual engineering, Installations in buildings, Coals, Freight distribution of goods, Products of the chemical industry, Paper and board, Quality, Materials for aerospace construction, Non-ferrous metals, Occupational safety. Industrial hygiene, Safety of machinery, Ergonomics, Cellular materials, Pipeline components and pipelines, Plastics, Physics. Chemistry, Electronic components in general, Bridge construction, Optical equipment, Elements of buildings, Ceramics, Agricultural machines, implements and equipment, Powder metallurgy, Power transmission and distribution networks, Veterinary medicine, Rubber and plastics products, Pumps, Meat, meat products and other animal produce, Insulating materials, Document imaging applications, TESTING, Water quality, General methods of tests and analysis for food products, Test conditions and procedures in general, Construction materials, Wastes, Medical equipment, Measurement of fluid flow, Fasteners, Software development and system documentation, Environmental protection, Particle size analysis. Sieving, Fishing and fish breeding, Fibre optic communications, Graphic technology, External sewage systems, Fasteners for aerospace construction, Road engineering, Internal combustion engines, Insulation, Refrigerating technology, Extraction and processing of petroleum and natural gas, Waxes, bituminous materials and other petroleum products, Birth control. Mechanical contraceptives, Fuels, Industrial automation systems, Photography, Data storage devices, Products of the textile industry.


American Society of Civil Engineers (ASCE), Duplicate wells for detection

Association Francaise de Normalisation, Duplicate wells for detection

  • NF EN 455-1/IN1:2022 Gants médicaux non réutilisables - Partie 1 : exigences et essais pour la détection de l'absence de trous
  • NF EN 455-1+A1:2022 Gants médicaux non réutilisables - Partie 1 : exigences et essais pour la détection de l'absence de trous
  • NF P98-311-5*NF EN 124-5:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 5 : gully tops and manhole tops made of composite materials
  • NF T81-123:1979 Transportation equipment. Road tankers for liquified pressure gas. Holes for gauging, degassing and testing.
  • NF ISO 2772:2019 Conditions d'essais des perceuses verticales à montant (perceuses-aléseuses) - Contrôle de l'exactitude
  • NF Q03-096*NF EN 13676:2001 Polymer coated paper and board intended for food contact - Detection of pinholes.
  • NF EN ISO 11623:2016 Bouteilles à gaz - Construction composite - Contrôles et essais périodiques
  • NF EN ISO 17643:2015 Contrôle non destructif des assemblages soudés - Contrôle par courants de Foucault des assemblages soudés avec analyse des signaux dans le plan complexe
  • NF EN 13676:2001 Papiers et cartons enduits de polymères destinés à entrer en contact avec les denrées alimentaires - Détection des trous d'épingle
  • NF E11-150-5:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5 : CMMs using single and multiple stylus contacting probing systems.
  • NF B43-211:2004 Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity.
  • NF EN 12543-2:2021 Essais non destructifs - Caractéristiques des foyers émissifs des tubes radiogènes industriels utilisés dans les essais non destructifs - Partie 2 : méthode radiographique par sténopé
  • XP T16-106*XP CEN/TS 17273:2019 Nanotechnologies - Guidance on detection and identification of nano-objects in complex matrices
  • NF T54-116:1973 Plastic. Sheets. Determination of resistance to perforation. Perforametre method.
  • NF ISO 23876:2022 Bouteilles à gaz - Bouteilles et tubes composites - Essai par émission acoustique (EA) pour les contrôles et les essais périodiques
  • NF P98-311-2*NF EN 124-2:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 2 : gully tops and manhole tops made of cast iron
  • NF X11-501*NF ISO 565:1990 Test sieves. Metal wire cloth, peroforated metal plate and electroformed sheet. Nominal sizes of openings.
  • NF A09-231-2*NF EN 12543-2:2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2 : pinhole camera radiographic method
  • NF EN 547-2+A1:2008 Sécurité des machines - Mesures du corps humain - Partie 2 : principes de détermination des dimensions requises pour les orifices d'accés
  • NF EN 547-2/IN1:2008 Sécurité des machines - Mesures du corps humain - Partie 2 : principes de détermination des dimensions requises pour les orifices d'accés
  • NF P16-369/IN1*NF EN 14982/IN1:2010 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness.
  • NF P16-369*NF EN 14982+A1:2010 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
  • XP CEN/TS 17273:2019 Nanotechnologies - Document d'orientation pour la détection et l'identification des nano-objets dans les matrices complexes
  • NF A09-360:1985 Non destructive testing. Acoustic emission. Examination of composite material parts and structures. Matrix fibers.
  • NF P20-518:1984 Methods of testing doors. Test for the change in stiffness of the door leaves by repeated torsion.
  • NF E60-100-2*NF ISO 230-2:2014 Test code for machine tools - Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes
  • NF G38-017:1989 TEXTILES. ARTICLES FOR INDUSTRIAL USES. TESTS FOR GEOTEXTILES. MEASUREMENT OF PORE SIZE. DETERMINATION OF FILTRATION OPENING.

Group Standards of the People's Republic of China, Duplicate wells for detection

  • T/QGCML 741-2023 Pile hole diameter detection device
  • T/CECS 253-2022 In-hole imaging inspection standard for foundation foundation
  • T/CECS 596-2019 Technical specification for testing of borehole of cast-in-place piles
  • T/CASME 832-2023 Technical specification for testing new composite foundation with data traceability
  • T/QGCML 1056-2023 Auto parts hole position deviation size detection device
  • T/JSEE 011-2023 Technical specifications for X-ray detection of composite core damage of carbon fiber composite core conductors
  • T/SCBDIF 001-2023 Process defect detection method for batch repetitively processed products
  • T/CATSI 02012-2022 Infrared thermal imaging detection method for fiber-wound composite gas cylinder
  • T/CPFIA 0001-2020 Technical specification for tail gas detection of compound fertilizer high-tower granulation process
  • T/SCMES 19-2023 Surface geometric integrity testing equipment for complex curved surface parts
  • T/CSEE 0166-2020 Technical specification for optoelectronic integrated detection device for optical fiber composite low-voltage cables
  • T/CIMA 0009-2019 Automatic pretreatment instrument for rapid detection of malachite green in aquatic products
  • T/CSTM 00433-2023 Nondestructive testing- Bonding interface of mullite fiber composites- Terahertz time-Domain spectroscopy detection method
  • T/CAMS /CICEIA24-2019 Reciprocating internal combustion engine-Turbocharger- Method for leakage-measurement
  • T/CAS 413-2020 Supervision Regulations for Drainage Pipeline Inspection and Trenchless Restoration
  • T/ZJSEE 0015-2023 Guidance for composite insulators infrared test in overhead lines with unmanned aerial vehicles
  • T/CAMS 104.1-2022 Test method for laser processing microstructurePart 1:Micro circle hole
  • T/JSJTQX 21-2021 Technicalspecificationfordetectionofembeddeddepthofcorrugatedbeamguardrailcolumnbydrillingmethod
  • T/CECS 879-2021 Technical specification for non-destructive testing of bridge prestressed tunnel grouting density
  • T/CSTM 00270-2020 X-Ray Digital Radiography for composite sandwich structure

Professional Standard - Petroleum, Duplicate wells for detection

  • SY/T 6824-2011 General requirements and testing method of combined perforator for oil and gas well
  • SY/T 5623-1997 Prediction and detection methods of formation pore pressure
  • SY/T 5891.1-1999 Specification of making concrete targets for well perforators test
  • SY/T 6791-2010 General requirements and testing methods of firing head system of oil and gas well
  • SY 6791-2010 General technical conditions and detection methods of perforation initiation device for oil and gas wells

HU-MSZT, Duplicate wells for detection

IETF - Internet Engineering Task Force, Duplicate wells for detection

  • RFC 7527-2015 Enhanced Duplicate Address Detection
  • RFC 4429-2006 Optimistic Duplicate Address Detection (DAD) for IPv6
  • RFC 6957-2013 Duplicate Address Detection Proxy
  • RFC 7352-2014 Sieve Email Filtering: Detecting Duplicate Deliveries
  • RFC 5682-2009 Forward RTO-Recovery (F-RTO): An Algorithm for Detecting Spurious Retransmission Timeouts with TCP

YU-JUS, Duplicate wells for detection

  • JUS C.A7.091-1985 Non-destructive testing. Metallographic replica technigues ofsurface examination
  • JUS G.S2.813-1990 Cellular plastics. Compression test for rigid materials
  • JUS D.A8.090-1984 Tasting of fibre building boards. Detormination ofreslstence to perforation by impact
  • JUS D.C8.118-1987 Testing of particleboards; determination of formaldehyde content; extraction methodcalled perf orator method
  • JUS D.C8.118/1-1988 Testing of particleboards; determivation of formaldebjrde ccmtent; extract±on method cal led perforator method. Anendment

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Duplicate wells for detection

  • GB/T 17455-2008 Non-destrctive testing.Metallographic replica techniques of surface examination
  • GB/T 14289-1993 Earth-moving machinery. Diagnostic ports
  • GB/T 24762-2009 Geometrical Product Specifications(GPS).Acceptance test and reverification test for video measuring machine
  • GB/T 17455-1998 Non-destructive testing--Metallographic replica techniques of surface examination
  • GB/T 26954-2011 Non-destructive testing of welds.Eddy current testing of welds by complex-plane analysis
  • GB/T 22638.2-2008 Test methods for aluminium and aluminium alloy foils.Part 2:Determination of porosity
  • GB/T 7734-2015 Method for ultrasonic testing of clad steel plates
  • GB/T 41655-2022 Non-destructive testing—Ultrasonic testing—Technique of testing claddings produced by welding, rolling and explosion
  • GB/T 16857.1-2002 Geometrical product specification(GPS)-Acceptance and reverification tests for coordinate measuring machines--Part 1: Vocabulary
  • GB/T 16857.2-2006 Geometrical Product Specifications(GPS). Acceptance and reverification tests for coordinate measuring machines(CMM). Part 2:CMMs used for measuring size
  • GB/T 16306-2008 Re-inspection and re-rest procedures for assessment of declared quality levels
  • GB/T 16857.10-2022 Acceptance testing and re-inspection testing of product geometry specification (GPS) coordinate measuring system (CMS) Part 10: Laser tracker
  • GB/T 16857.3-2009 Geometrical Product Specifications(GPS).Acceptance and reverification tests for coordinate measuring machines(CMM).Part 3:CMMs with the axis of a rotary table as the fourth axis
  • GB/T 16857.4-2003 Geometrical product specifications(GPS)--Acceptance and reverification tests for coordinate measuring machines(CMM)--Part 4: CMMs used in scanning measuring mode
  • GB/T 16857.9-2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 9:CMMs with multiple probing systems
  • GB/T 16857.7-2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 7: CMMs equipped with imaging probing systems
  • GB/T 16857.5-2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 5:CMMs using multiple-stylus probing systems
  • GB/T 16857.12-2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 12: Articulated arm coordinate measurement machines (CMM)
  • GB/T 16857.6-2006 Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features
  • GB/T 16857.8-2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 8: CMMs with optical distance sensors
  • GB 51008-2016 Testing and Appraisal Standards for Towering and Complex Steel Structures
  • GB/T 20361-2006 Determination of malachite green and gentian violet residues in fishery products. High performance liquid chromatography with fluorescence detector
  • GB/T 23901.2-2009 Non-destructive testing.Image quality of radiographs.Part 2:Image quality indicators (step/hole type).Determination of image quality value

国家市场监督管理总局、中国国家标准化管理委员会, Duplicate wells for detection

  • GB/T 40336-2021 Non-destructive testing—Leak testing—Calibration of reference leaks for gases
  • GB/T 23901.2-2019 Non-destructive testing—Image quality of radiographs—Part 2:Determination of the image quality value using step/hole-type image quality indicators
  • GB/T 37166-2018 Non-destructive testing—Test method of composite materials for industrial computed tomography (CT)
  • GB/T 16857.901-2020 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 901: CMMs with multiple imaging probing system
  • GB/T 39789-2021 Non-destructive testing of welds—Eddy current-video integrated testing method of metal composites weld
  • GB/T 38949-2020 Determination of pore size for porous membranes—Standard particle method
  • GB/T 40728-2021 Remanufacturing—Quality inspection methods for repaired layers of mechanical products
  • GB/T 36984-2018 X-ray CT testing method of the porous metal materials for surgical implant applications

International Organization for Standardization (ISO), Duplicate wells for detection

  • ISO 8925:1989 Earth-moving machinery; diagnostic ports
  • ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
  • ISO 15721:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
  • ISO 22476-7:2012 Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test
  • ISO 11623:2002 Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders
  • ISO 12817:2013 Fibre-reinforced plastic composites - Determination of open-hole compression strength
  • ISO 12817:2012 Fibre-reinforced plastic composites - Determination of open-hole compression strength
  • ISO 3057:1974 Non-destructive testing; Metallographic replica techniques of surface examination
  • ISO 15398:2012 Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas
  • ISO 23429:2004 Gauging of hexagon sockets
  • ISO/CD TR 10064-2.2 Code of inspection practice — Part 2: Double Flank Radial Composite Measurements
  • ISO/TS 19016:2019 Gas cylinders — Cylinders and tubes of composite construction — Modal acoustic emission (MAE) testing for periodic inspection and testing
  • ISO 230-2:2006 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes (Fourth Edition)
  • ISO 230-2:2014 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
  • ISO 22476-1:2012/cor 1:2013 Geotechnical investigation and testing - Field testing - Part 1: Electrical cone and piezocone penetration test; Technical Corrigendum 1

National Metrological Verification Regulations of the People's Republic of China, Duplicate wells for detection

  • JJG 153-2020 Mechanical hole detector[
  • JJG 467-1986 Verification Regulation of Precision Bore Diameter Measuring Instrument
  • JJG(石油) 02-1990 Verification rules for standard orifice plate for natural gas flow measurement
  • JJG(机械) 23-1990 Verification regulations for the verticality tester of the inner hole of the bearing inner ring to the end face

Korean Agency for Technology and Standards (KATS), Duplicate wells for detection

  • KS B ISO 3057:2018 Non-destructive testing — Metallographic replica techniques of surface examination
  • KS B ISO 11623:2008 Transportable gas cylinders-Periodic inspection and testing of composite gas cylinders
  • KS B ISO 11623:2013 Transportable gas cylinders－Periodic inspection and testing of composite gas cylinders
  • KS B 4212-2013 Test conditions for turret and single spindle co－ordinatedrilling machines with vertical spindle－Testing of the accuracy
  • KS B ISO 3057:2008 Non-destructive testing－Metallographic replica techniques of surface examination
  • KS M 3082-2007 Test methods for shear properties of fiber reinforced plastics by the V-notched specimen
  • KS I 3323-2014 Recycled plastics manhole for signal-controlled
  • KS I 3323-2016 Recycled plastics manhole for signal-controlled
  • KS P ISO 10328:2009 Prosthetics-Structural testing of lower-limb prostheses-Requirements and test methods
  • KS B ISO 10360-7:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 7:CMMs used for measuring
  • KS B ISO 10360-7:2015 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 7:CMMs used for measuring
  • KS M 7056-1982(2002) TESTING METHOD FOR PUNCTURE OF PAPERBOARD
  • KS E 3732-1987(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
  • KS M 7056-1982 TESTING METHOD FOR PUNCTURE OF PAPERBOARD
  • KS B ISO 230-2:2014 Test code for machine tools-Part 2 : Determination of accuracy and repeatability of positioning numerically controlled axes
  • KS B ISO 230-2:2015 Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
  • KS B ISO 230-2:2007 Test code for machine tools-Part 2 : Determination of accuracy and repeatability of positioning numerically controlled axes
  • KS B ISO 19232-2:2005 Non-destructive testing－Image quality of radiographs－Part 2：Image quality indicators(step/hole type)－Determination of image quality value

KR-KS, Duplicate wells for detection

  • KS B ISO 3057-2018 Non-destructive testing — Metallographic replica techniques of surface examination

AIA/NAS - Aerospace Industries Association of America Inc., Duplicate wells for detection

  • NAS999-1981 Nondestructive Inspection of Advanced Composite Structures
  • NAS999-2012 NONDESTRUCTIVE INSPECTION OF ADVANCED COMPOSITE STRUCTURES (Rev 2)

Indonesia Standards, Duplicate wells for detection

German Institute for Standardization, Duplicate wells for detection

  • DIN 2921:1968 Access openings 450 × 450
  • DIN 64805:1984 Double lift dobbies; cards, matrices
  • DIN EN ISO 16148:2006 Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing (AT) for periodic inspection (ISO 16148:2006) English version of DIN EN ISO 16148:2006-08
  • DIN EN 13676:2001 Polymer coated paper and board intended for food contact - Detection of pinholes; German version EN 13676:2001
  • DIN 53142-1:2014 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
  • DIN 53142-1:2004 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
  • DIN EN ISO 11623:2018-01 Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02); German version EN ISO 11623:2015 / Note: To be replaced by DIN EN ISO 11623 (2022-04), DIN EN ISO 11623 (2022-12).
  • DIN EN 13676:2001-06 Polymer coated paper and board intended for food contact - Detection of pinholes; German version EN 13676:2001
  • DIN EN ISO 17643:2015-12 Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis (ISO 17643:2015); German version EN ISO 17643:2015
  • DIN 58141-3:1989 Testing of fibre optic elements; determination of acceptance angle of light guides
  • DIN 53142-2:2004 Testing of board - Puncture test - Part 2: Puncture test with linear move
  • DIN 53142-2:2014 Testing of board - Puncture test - Part 2: Puncture test with linear move
  • DIN 54150:1977 Non-destructive testing; impression methods for surface examination (Replica-technique)
  • DIN EN 1389:2004 Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity; German version EN 1389:2003
  • DIN 65187:1986 Aerospace; inserts for composite materials, with clearance hole, aluminium alloy
  • DIN 65306:1986 Aerospace; inserts for composite materials, with clearance hole, corrosion resisting steel
  • DIN EN ISO 24817:2018-03 Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2017); English version EN ISO 24817:2017
  • DIN EN ISO 11623:2022-12 Gas cylinders - Composite cylinders and tubes - Periodic inspection and testing (ISO/DIS 11623.2:2022); German and English version prEN ISO 11623:2022 / Note: Date of issue 2022-10-28*Intended as replacement for DIN EN ISO 11623 (2018-01).
  • DIN EN 12543-2:2019 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method; German and English version prEN 12543-2:2019
  • DIN CEN/TS 17273:2019-06*DIN SPEC 52379:2019-06 Nanotechnologies - Guidance on detection and identification of nano-objects in complex matrices; German version CEN/TS 17273:2018
  • DIN EN 50699:2021 Recurrent Test of Electrical Equipment; German version EN 50699:2020
  • DIN EN 14982:2011-01 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness; German version EN 14982:2006+A1:2010 / Note: To be replaced by DIN EN ISO 13268 (2022-09).
  • DIN ISO 1985:1999 Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy (ISO 1985:1998)
  • DIN EN ISO 10360-2:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009); German version EN ISO 10360-2:2009
  • DIN 32645:2008-11 Chemical analysis - Decision limit, detection limit and determination limit under repeatability conditions - Terms, methods, evaluation
  • DIN 19051-4:1991 Test charts for micrography; DIN-test chart B for optical density and for determination of scale of reproduction
  • DIN EN ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011); German version EN ISO 10360-7:2011
  • DIN 4023:2006 Geotechnical investigation and testing - Graphical presentation of logs of boreholes, trial pits, shafts and adits
  • DIN EN 12543-2:2021-06 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method; German version EN 12543-2:2021

Professional Standard - Machinery, Duplicate wells for detection

  • JB/T 10658-2006 Non-destructive testing Eddy current testing of welds by complex plane analysis
  • JB/T 10231.11-2002 Tool inspection methods Part 11:Core drills
  • JB/T 8248.2-1999 Method for measurement for effective aperture and relative aperture of camera lenses

CZ-CSN, Duplicate wells for detection

IT-UNI, Duplicate wells for detection

  • UNI 7604-1976 Examination with electron microscope of metallic materials by the replica technique. Preparation of replicas for microfractography examination.
  • UNI 7329-1974 Examination with electron microscope of metallic materials by the replica technique. Preparation of replicas for microstructure examination.
  • UNI EN 12543-2-2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
  • UNI 2231-1943
  • UNI 6327-1968 Microscopic examination of metallic materials. Use of varnish and film replica.

Professional Standard - Coal, Duplicate wells for detection

  • MT/T 991-2006 The visual examine instrument of the borehole in mine

American Society for Testing and Materials (ASTM), Duplicate wells for detection

  • ASTM D5151-11 Standard Test Method for Detection of Holes in Medical Gloves
  • ASTM D5151-19 Standard Test Method for Detection of Holes in Medical Gloves
  • ASTM D5151-19(2023) Standard Test Method for Detection of Holes in Medical Gloves
  • ASTM D5151-99(2006) Standard Test Method for Detection of Holes in Medical Gloves
  • ASTM D5151-06 Standard Test Method for Detection of Holes in Medical Gloves
  • ASTM D5151-99 Standard Test Method for Detection of Holes in Medical Gloves
  • ASTM D5151-06(2011) Standard Test Method for Detection of Holes in Medical Gloves
  • ASTM D5151-06(2015) Standard Test Method for Detection of Holes in Medical Gloves
  • ASTM E1294-89(1999) Standard Test Method for Pore Size Characteristics of Membrane Filters Using Automated Liquid Porosimeter
  • ASTM D6484/D6484M-04 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • ASTM D5766/D5766M-02 Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D5766/D5766M-02a Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D3768-96(2000) Standard Test Method for Microcellular Urethanes--Flexural Recovery
  • ASTM D3768-96 Standard Test Method for Microcellular Urethanes--Flexural Recovery
  • ASTM D3768-22 Standard Test Method for Microcellular Urethanes—Flexural Recovery
  • ASTM D3768-16 Standard Test Method for Microcellular Urethanes&x2014;Flexural Recovery
  • ASTM F1735-09(2015) Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
  • ASTM C1869-18(2023) Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
  • ASTM D4762-88(2001) Standard Guide for Testing Automotive/Industrial Composite Materials
  • ASTM D4762-88(1995)e1 Standard Guide for Testing Automotive/Industrial Composite Materials
  • ASTM D4762-16 Standard Guide for Testing Polymer Matrix Composite Materials
  • ASTM D7246-06 Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves
  • ASTM D7246-06(2015) Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves
  • ASTM D7246-06(2021) Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves
  • ASTM A1015-01 Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
  • ASTM A1015-01(2005) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
  • ASTM A1015-01(2009) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
  • ASTM C1785-15 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
  • ASTM A1015-01(2014) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
  • ASTM C1785-17 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
  • ASTM C1785-16 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
  • ASTM D3768-11 Standard Test Method for Microcellular Urethanesmdash;Flexural Recovery
  • ASTM C1785-16a Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
  • ASTM F1469-99 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
  • ASTM F1469-99(2004) Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
  • ASTM D3768-06 Standard Test Method for Microcellular Urethanes-Flexural Recovery
  • ASTM F1469-99(2010) Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
  • ASTM F3039-23 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
  • ASTM F807-83(2003) Standard Practice for Determining Resolution Capability of Office Copiers
  • ASTM D7615/D7615M-11 Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
  • ASTM E2533-09 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications
  • ASTM F1698-02(2015) Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
  • ASTM F1929-98 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
  • ASTM F1929-98(2004) Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
  • ASTM A939/A939M-15(2020) Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings (Withdrawn 2021)
  • ASTM D6484/D6484M-14 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • ASTM C478-07 Standard Specification for Precast Reinforced Concrete Manhole Sections
  • ASTM C478-09 Standard Specification for Precast Reinforced Concrete Manhole Sections
  • ASTM D6484/D6484M-04e1 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • ASTM D6484/D6484M-99e1 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • ASTM D6484/D6484M-20 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • ASTM E2229-02 Standard Practices for Interpretation of Psychophysiological Detection of Deception (Polygraph) Data
  • ASTM E2229-09 Standard Practices for Interpretation of Psychophysiological Detection of Deception (Polygraph) Data
  • ASTM F1929-15 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
  • ASTM D5766/D5766M-95 Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D5766/D5766M-02a(2007) Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D5766/D5766M-07 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D5766/D5766M-11(2018) Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates

CH-SNV, Duplicate wells for detection

  • SEV 0140-1938
  • SN EN 12543-2-2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method

National Association of Pipe Fabricators (NAPF), Duplicate wells for detection

  • PFI ES-16-2004 Access Holes, Bosses and Plugs for Radiographic Inspection of Pipe Welds
  • PFI ES-16-1985 Access Holes, Bosses and Plugs for Radiographic Inspection of Pipe Welds R(2001)
  • PFI ES-16-2013 ACCESS HOLES, BOSSES AND PLUGS FOR RADIOGRAPHIC INSPECTION OF PIPE WELDS

TR-TSE, Duplicate wells for detection

  • TS 2310-1976 Non- Destructive Testing- Metallographic Replica Technigues of Surface examination

U.S. Military Regulations and Norms, Duplicate wells for detection

Aerospace Industries Association/ANSI Aerospace Standards, Duplicate wells for detection

Aerospace Industries Association, Duplicate wells for detection

  • AIA NAS 999-1981 Nondestructive Inspection of Advanced Composite Structures R(1988)

Yunnan Provincial Standard of the People's Republic of China, Duplicate wells for detection

  • DB53/T 761-2016 Limit and detection of compound sodium nitrophenolate in fertilizer
  • DB53/ 038-1999 Quality Inspection of Red-cured Tobacco Leaf on Hanging Rod
  • DB53/T 1064.3-2021 Green Peacock Quarantine Technology Part 3: Technical Specifications for Feather Lice Laboratory Testing
  • DB53/T 1064.2-2021 Green Peacock Quarantine Technology Part 2: Technical Specifications for Laboratory Detection of Avian Influenza Virus
  • DB53/T 1064.1-2021 Green Peacock Quarantine Technology Part 1: Technical Specifications for Laboratory Testing of Avian Paramyxovirus
  • DB53/T 1064.4-2021 Green Peacock Quarantine Technology Part 4: Technical Specifications for Laboratory Testing of Gastrointestinal Nematodes

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Duplicate wells for detection

  • GB/T 22638.2-2016 Test methods for aluminium and aluminium alloy foils—Part 2: Determination of pinhole
  • GB/T 34886-2017 Non-destructive testing—Test method for laser shearography of composite materials
  • GB/T 34890-2017 Geometrical product specification（GPS）—Acceptance and reverification tests for digital photogrammetry 3D coordinate measuring system
  • GB/T 16857.2-2017 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 2: CMMs used for measuring linear dimensions
  • GB/T 34874.3-2017 Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 3：Acceptance and reverification tests
  • GB/T 16857.5-2017 Geometrical product specifications(GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 5:CMMs using single or multiple stylus contacting probing systems

国家煤矿安全监察局, Duplicate wells for detection

European Committee for Standardization (CEN), Duplicate wells for detection

  • EN ISO 17643:2015 Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis (ISO 17643:2015)
  • EN 13676:2001 Polymer coated paper and board intended for food contact - Detection of pinholes
  • EN ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
  • EN 1716:1997 Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an assembled tapping tee
  • EN 1389:2003 Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity
  • EN ISO 22476-7:2012 Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test
  • EN 993-1:1995 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity
  • EN ISO 11623:2015 Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02)
  • EN ISO 11623:2002 Transportable Gas Cylinders - Periodic Inspection and Testing of Composite Gas Cylinders ISO 11623: 2002
  • CEN/TS 17273:2018 Nanotechnologies - Guidance on detection and identification of nano-objects in complex matrices
  • EN 124-5:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
  • FprEN ISO 11623 Gas cylinders - Composite cylinders and tubes - Periodic inspection and testing (ISO/FDIS 11623:2023)
  • EN ISO 11623:2023 Gas cylinders - Composite cylinders and tubes - Periodic inspection and testing (ISO 11623:2023)

未注明发布机构, Duplicate wells for detection

  • BS EN 1711:2000(2004) Non - destructive examination of welds — Eddy current examination of welds by complex plane analysis
  • BS EN ISO 11623:2015(2018) Gas cylinders - Composite construction - Periodic inspection and testing
  • DIN EN ISO 11623:2016 Gas cylinders – Composite construction – Periodic inspection and testing
  • BS EN ISO 24817:2017(2018) Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection

RU-GOST R, Duplicate wells for detection

  • GOST 33377-2015 Polymer composites. Test method for filled-hole tension testing of specimens
  • GOST 33375-2015 Polymer composites. Test method for open-hole tension testing of specimens
  • GOST R 56787-2015 Polymer composites. Nondestructive testing
  • GOST R 59181-2021 Automobile roads of general use. Bridge constructions. Non-destructive testing methods for detection of holidays in dielectric waterproofing coatings at bridge spans
  • PNST 532-2021 Space systems. Carbon-carbon and ceramic matrix composites. Determination of apparent density and of open porosity
  • GOST 13.1.701-1995 Reprography. Micrography. Test-charts for image quality control. Types. Methods of control
  • GOST 13.1.407-1991 Reprography. Micrography. Devices for mounting microfilms into jackets. General technical requirements. Methods of control
  • GOST 13.1.408-1991 Reprography. Micrography. Devices for mounting microfilms into aperture cards. General technical requirements. Methods of control
  • GOST R 56788-2015 Polymer composites. Test method open-hole compressive strength of polymer matrix composite laminates
  • GOST R 57604-2017 Polymer composites. General requirements for the content of nondestructive testing documentation
  • GOST R 56814-2015 Polymer composites. Ultrasonic testing of sandwich constructions face sheet and core material
  • GOST 409-2017 Plastics cellular and rubbers cellular. Determination of apparent density
  • GOST ISO 4074-5-1993 Rubber condoms. Testing for holes

Society of Automotive Engineers (SAE), Duplicate wells for detection

  • SAE ARP4402-2013 Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure
  • SAE ARP4402A-2020 Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure
  • SAE ARP5089-1996 Composite Repair NDT/NDI Handbook
  • SAE AS4787-2013 Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware
  • SAE AS4787A-2019 Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware
  • SAE AMS3898/4B-1994 Interleaf Carrier Material, Composite Tape Paper, 0.004 inch (0.10 mm), Perforated
  • SAE AMS3898/1B-1994 Interleaf Carrier Material, Composite Tape Parchment, 0.004 inch (0.10 mm), Unperforated
  • SAE AMS3898/1-1975 INTERLEAF CARRIER MATERIAL, COMPOSITE TAPE Parchment, 0.004 in. (0.10 mm), Unperforated
  • SAE AMS3898/7A-1994 Interleaf Carrier Material, Composite Tape Differentially Coated Paper, Unperforated 0.0042 in. (0.107 mm)
  • SAE AMS3898B-1994 Interleaf Carrier Material, Composite Tape or Broadgoods Paper, 0.004 Inch (0.10 mm), Perforated
  • SAE ARP4402-1992 Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure
  • SAE AMS3898/2B-1994 Interleaf Carrier Material, Composite Tape Polyethylene Film, 0.0018 inch (0.046 mm), Unperforated

Professional Standard - Aerospace, Duplicate wells for detection

  • QJ 480-1979 test method for porosity of metallic coatings
  • QJ 2914-1997 Acoustic Emission Testing Method for Composite Structural Parts

Professional Standard - Recommended Standards for Engineering Construction, Duplicate wells for detection

  • CECS 253-2009 Technical specification for testing method with yideo monitor through the hole of foundation pile

工业和信息化部/国家能源局, Duplicate wells for detection

工业和信息化部, Duplicate wells for detection

  • JB/T 13912-2020 Online pinhole detection device for uncoiled wire
  • YS/T 63.6-2019 Testing methods for carbon materials for aluminum use Part 6: Determination of open porosity
  • YS/T 1130-2016 Method for detecting welding cracks in sintered metal porous materials
  • JC/T 2626-2021 Method for detecting pollutant release characteristic parameters of wood composite panels

Danish Standards Foundation, Duplicate wells for detection

  • DS/EN 1711/A1:2004 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis
  • DS/EN 1711:2002 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis
  • DS/EN 13676:2001 Polymer coated paper and board intended for food contact - Detection of pinholes
  • DS/EN 1389:2004 Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity
  • DS/EN 12543-2:2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
  • DS/EN 14982+A1:2011 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
  • DS/ENV 1389:1994 Advanced technical ceramics. Ceramic composites. Physical properties. Determination of density and apparent porosity
  • DS 2389:1993 Centre holes 60 degree. Determination of dimensions
  • DS 2390:1993 Centre holes 90 degree. Determination fo dimensions
  • DS 2420-2:2008 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced - Supplement to DS/EN 1917
  • DS/ISO 15398:2013 Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas
  • DS/EN 12543-2:2021 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 2: Pinhole camera radiographic method

Lithuanian Standards Office , Duplicate wells for detection

  • LST EN 1711-2000 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis
  • LST EN 1711-2000/A1-2004 Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis
  • LST EN 13676-2003 Polymer coated paper and board intended for food contact - Detection of pinholes
  • LST EN ISO 15721:2002 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001)
  • LST EN ISO 11623:2002 Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders (ISO 11623:2002)
  • LST EN 1389-2004 Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity
  • LST EN 12543-2-2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
  • LST EN 12543-2-2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
  • LST EN 14982-2006+A1-2010 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness

Professional Standard - Agriculture, Duplicate wells for detection

  • NY/T 1485-2007 Detection and identification for Radopholus similis（Cobb)Thorne
  • KJ 201701 Colloidal gold immunochromatography for rapid detection of malachite green in aquatic products
  • NY/T 2255-2012 Technical code for detection of banana burrowing nematode, banana race and citrus race

Professional Standard - Post and Telecommunication, Duplicate wells for detection

  • YD/T 787-1995 Test method of time-division multiplexer at 64kbit/s

Anhui Provincial Standard of the People's Republic of China, Duplicate wells for detection

  • DB34/T 4051-2021 In-hole TV Imaging Inspection Regulations in Concrete Holes
  • DB34/T 2252-2014 Detection of Malachite Green Residues in Aquatic Products—Colloidal Gold Immunochromatography
  • DB34/T 3587-2020 Technical regulations for inspection and repair of urban drainage pipelines

Association of German Mechanical Engineers, Duplicate wells for detection

  • VDI/VDE 2608-2001 Tangential composite and radial composite inspection of cylindrical gears, bevel gears, worms and worm wheels
  • VDI/VDE/DGQ 2618 Blatt 13.2-2005 Inspection of measuring and test equipment - Test instruction for bore gauges with 2-point contact

Japanese Industrial Standards Committee (JISC), Duplicate wells for detection

  • JIS R 2205:1992 Testing method for apparent porosity, water absorption specific gravity of refractory bricks
  • JIS Z 2324-1:2018 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 1: Standard test blocks
  • JIS Z 2324-2:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 2: Method of testing for performance characteristics of laser inspection system
  • JIS B 8311:1991 Reciprocating pumps -- Testing methods
  • JIS Z 2324-3:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 3: Method of testing for performance characteristics of camera inspection system
  • JIS B 8603:1989 Performance testing and inspection methods by air for open type reciprocating refrigerant compressors
  • JIS Z 2324-4:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 4: Method of testing for performance characteristics of eddy current inspection system

British Standards Institution (BSI), Duplicate wells for detection

  • BS EN 13676:2001 Polymer coated paper and board intended for food contact - Detection of pinholes
  • BS EN 16210:2013 Transportation loads. Measurement and evaluation of climatic and other loads. Data acquisition and general requirements for measuring equipment
  • BS ISO 12817:2013 Fibre-reinforced plastic composites. Determination of open-hole compression strength
  • BS PAS 139:2012 Detection and characterization of manufactured nano-objects in complex matrices. Guide
  • BS EN ISO 11623:2002 Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders
  • BS ISO 15398:2012 Specifications for thermoplastics covers And frames for manholes and inspection chambers used in non-traffic areas
  • BS EN 1389:2004 Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity
  • BS EN 1389:2003 Advanced technical ceramics - Ceramic composites - Physical properties - Physical properties - Determination of density and apparent porosity
  • BS EN ISO 11623:2023 Gas cylinders. Composite cylinders and tubes. Periodic inspection and testing
  • BS EN ISO 16663-1:2009 Fishing nets, Method of test for the determination of mesh size - Opening of mesh
  • BS EN 61300-3-27:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Measurement method for the hole location of a multiway connector plug. Section 27: Measurement method for the hole locatio...
  • BS ISO 13314:2011 Mechanical testing of metals. Ductility testing. Compression test for porous and cellular metals
  • 21/30391147 DC BS ISO 23876. Gas cylinders. Cylinders and tubes of composite construction — Acoustic emission examination (AT) for periodic inspection and testing
  • BS ISO 3057:1998 Non-destructive testing - Metallographic replica techniques of surface examination
  • BS EN 295-6:2013 Vitrified clay pipes systems for drain and sewers. Requirements for components of manholes and inspection chambers
  • BS EN 124-5:2015 Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of composite materials

Professional Standard - Press and Publication, Duplicate wells for detection

  • CY/T 106-2014 Quality Inspection and Evaluation Specifications for Optical Disc Replication
  • CY/T 105-2014 Sampling Test Specification for Optical Disc Quality of Reproduction

Henan Provincial Standard of the People's Republic of China, Duplicate wells for detection

  • DB41/T 2467-2023 Emergency inspection specifications for disaster-stricken elevator recovery
  • DB41/T 2311-2022 Technical specification for quality inspection of prestressed tunnel grouting in highway bridges

国家能源局, Duplicate wells for detection

  • NB/T 10382-2019 Technical Specifications for Detection and Inspection of Flotation Composite Agents for Coal Preparation

WRC - Welding Research Council, Duplicate wells for detection

  • BULLETIN 235-1978 IMPROVED REPEATABILITY IN ULTRASONIC EXAMINATION ; ULTRASONIC TESTING SYSTEM STANDARDIZATION REQUIREMENTS

Jiangsu Provincial Standard of the People's Republic of China, Duplicate wells for detection

  • DB32/T 4115-2021 Technical specifications for quality inspection of bored piles and underground diaphragm walls
  • DB32/T 2141-2012 Detection method of oxygenation capacity of microporous aeration and oxygenation equipment

Shandong Provincial Standard of the People's Republic of China, Duplicate wells for detection

  • DB37/T 5262-2023 Technical Standard for Quality Inspection of Underground Holes and Grooves

NL-NEN, Duplicate wells for detection

  • NVN-ENV 658-6-1994 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Part 6: Determination of shear strength by double-punch shearing
  • NEN-ISO 4003:1993 Permeable sintered metal materials. Determination of bubble test pore size (ISO 4003:1977)

Professional Standard - Non-ferrous Metal, Duplicate wells for detection

  • YS/T 455.2-2003 Test method for aluminium foil Part 2:Test method for porosity
  • YS/T 63.6-2006 Carbonaceous materials used in the production of aluminium-Part 6:Determination of open porosity using a hydrostatic method

Professional Standard - Commodity Inspection, Duplicate wells for detection

  • SN/T 2300-2009 Detection of mosquito-borne chikungunya virus at frontier port
  • SN/T 0481.12-2011 Inspection of bauxite for import and export.Part 12:Determination of apparent porosity and water absorption

SAE - SAE International, Duplicate wells for detection

  • SAE AS4787-1992 Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware
  • SAE AS6171/11-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by Design Recovery Test Methods

The American Road & Transportation Builders Association, Duplicate wells for detection

Standard Association of Australia （SAA）, Duplicate wells for detection

  • AS 4024.1703:2006 Safety of machinery - Principles for determining the dimensions required for access openings
  • AS ISO 17643:2020 Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
  • AS 2282.5:1999 Methods for testing flexible cellular polyurethane - Determination of cell count
  • AS 2337.3:2006/Amdt 1:2007
  • AS/NZS 4266.22/AMD 1:2006 Amendment No.1 to AS/NZS 4266.22.2004 Rrconstituted wood-based panels--Methods of test Part 22: Porosity of laminated surface
  • AS ISO 24817:2022 Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection

廊坊市市场监督管理局, Duplicate wells for detection

  • DB1310/T 282-2022 Technical Regulations for Inspection of Rigid Pile Composite Foundation

中国国家认证认可监督管理委员会, Duplicate wells for detection

  • RB/T 216-2017 Inspection and testing agency qualification accreditation capability evaluation food re-inspection agency requirements

Professional Standard - Railway, Duplicate wells for detection

RO-ASRO, Duplicate wells for detection

International Telecommunication Union (ITU), Duplicate wells for detection

  • ITU-T S.11-1989 Use of Start-Stop Reperforating Equipment for Perforated Tape Retransmission - Telegraph Services Terminal Equipment (Study Group IX) 1 pp
  • ITU-T S.11-1988 USE OF START - STOP REPERFORATING EQUIPMENT FOR PERFORATED TAPE RETRANSMISSION

Professional Standard - Electron, Duplicate wells for detection

IN-BIS, Duplicate wells for detection

AENOR, Duplicate wells for detection

  • UNE-EN 13676:2002 Polymer coated paper and board intended for food contact - Detection of pinholes.
  • UNE-EN 12543-2:2009 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
  • UNE-EN 14982:2007+A1:2011 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness

ES-UNE, Duplicate wells for detection

  • UNE-EN ISO 17643:2016 Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis (ISO 17643:2015)
  • UNE-EN ISO 24817:2017 Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2017, Corrected version 2018-01-01) (Endorsed by Asociación Española de Normalización in...
  • UNE-EN 12543-2:2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method

Professional Standard - Construction Industry, Duplicate wells for detection

  • JG/T 192-2006 Test method for repeated opening and closing performance of windows and doors

SE-SIS, Duplicate wells for detection

  • SIS SS 01 42 30-1982 Precision of test methods - Determina-tion of repeatability and reproducibility by inter-laboratory tests
  • SIS SS IEC 576:1983 Nuclear instrumentation - Portable bore-hole logging equipment - General characteristics

Jiangxi Provincial Standard of the People's Republic of China, Duplicate wells for detection

  • DB36/T 1197-2019 Regulations for testing the density of grouting in bridge prestressed tunnels

Professional Standard - Navy, Duplicate wells for detection

  • HJB 449.2-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 2:Examination for exploder aperture base

GM North America, Duplicate wells for detection

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Duplicate wells for detection

Hebei Provincial Standard of the People's Republic of China, Duplicate wells for detection

  • DB13/T 2768.4-2018 Graphene powder material detection method part 4: specific surface area, pore volume and pore diameter BET method
  • DB13/T 2480-2017 Technical specification for testing the quality of dense grouting in bridge prestressed tunnels
  • DB13/T 5186-2020 Technical specification for non-destructive testing of grouting density in prestressed tunnels of bridges

Professional Standard-Ships, Duplicate wells for detection

National Metrological Technical Specifications of the People's Republic of China, Duplicate wells for detection

  • JJF 1261.13-2014 Rules of Metrology Testing for Energy Efficiency Label of Copy Machines
  • JJF 1728-2018 Calibration Specification for Ultrasonic Testing Instruments for Resin Matrix Composites

Professional Standard - Civil Aviation, Duplicate wells for detection

  • MH/T 3022-2011 Infrared thermography for composite component of aircraft

Guangdong Provincial Standard of the People's Republic of China, Duplicate wells for detection

  • DB44/T 1163-2013 Detection method of composite enzyme substrate for the total number of bacterial colonies in water

Liaoning Provincial Standard of the People's Republic of China, Duplicate wells for detection

  • DB21/T 1450-2015 Technical specification for testing of building foundation piles and composite foundations
  • DB21/T 3827-2023 Technical regulations for non-destructive testing of grouting density in bridge prestressed tunnels

国家质量监督检验检疫总局, Duplicate wells for detection

API - American Petroleum Institute, Duplicate wells for detection

US-FCR, Duplicate wells for detection

American National Standards Institute （ANSI), Duplicate wells for detection

CEN - European Committee for Standardization, Duplicate wells for detection

  • EN 993-1:2018 Methods of Test for Dense Shaped Refractory Products - Part 1: Determination of Bulk Density@ Apparent Porosity and True Porosity
  • PD CEN/TS 17273:2018 Nanotechnologies - Guidance on detection and identification of nano-objects in complex matrices
  • PREN 12543-2-2019 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method

Military Standard of the People's Republic of China-General Armament Department, Duplicate wells for detection

  • GJB 9749-2020 Communication satellite fault detection, isolation and recovery function test methods
  • GJB 1038.1A-2004 Nondestructive testing methods for fiber reinforced composite materials Part 1 Ultrasonic testing

Professional Standard - Aviation, Duplicate wells for detection

  • HB 20095-2012 Inspection method for composite parts and structures using ultrasonic C-scan
  • HB 8571-2020 Active thermography test method for aviation composite material
  • HB 7825-2007 Requirements and manufacturing composite structures reference blocks for nondestructive testing

Universal Oil Products Company (UOP), Duplicate wells for detection

  • UOP 578-2011 Automated Pore Volume and Pore Size Distribution of Porous Substances by Mercury Porosimetry

ZA-SANS, Duplicate wells for detection

  • SANS 11623:2006 Transportable gas cylinders - Periodic inspection and testing of composite gas cylinders
  • SANS 10299-7:2003 Development, maintenance and management of groundwater resources Part 7: The rehabilitation of water boreholes

BE-NBN, Duplicate wells for detection

  • NBN S 02-003-1985 Test sieves - Technical requirements and testing - Part 2: Test sieves of metal perforated plate

Professional Standard - Public Safety Standards, Duplicate wells for detection

  • GA/T 1964-2021 Forensic Scientist Porcine STR Multiplex Amplification Assay Capillary Electrophoresis Fluorescence Detection
  • GA/T 754-2008 The requirements and test method of electronic data storage duplication tool

ES-AENOR, Duplicate wells for detection

Hubei Provincial Standard of the People's Republic of China, Duplicate wells for detection

  • DB42/T 1741-2021 Shock wave method to test the grouting density of bridge prestressed tunnels

PL-PKN, Duplicate wells for detection

  • PN-EN 12543-2-2021-09 E Non-destructive testing -- Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing -- Part 2: Pinhole camera radiographic method
  • PN P04662-1992 Knitted articles. Determination of perforation

AT-ON, Duplicate wells for detection

  • OENORM EN 12543-2-2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method

American Society of Mechanical Engineers (ASME), Duplicate wells for detection

FI-SFS, Duplicate wells for detection

GB-REG, Duplicate wells for detection

Shanxi Provincial Standard of the People's Republic of China, Duplicate wells for detection

  • DB14/T 1109-2015 Technical specification for non-destructive testing of bridge prestressed tunnel grouting compactness

Inner Mongolia Provincial Standard of the People's Republic of China, Duplicate wells for detection

  • DB15/T 1931-2020 Technical specification for non-destructive testing of bridge prestressed tunnel grouting compactness

American Welding Society (AWS), Duplicate wells for detection

  • WRC 235:1978 Part 1: Improved Repeatability in Ultrasonic Examination

AASHTO - American Association of State Highway and Transportation Officials, Duplicate wells for detection

  • M 199M/M 199-2007 Standard Specification for Precast Reinforced Concrete Manhole Sections
  • M 199M/M 199-2010 Standard Specification for Precast Reinforced Concrete Manhole Sections
  • M 199M/M 199-2014 Standard Specification for Precast Reinforced Concrete Manhole Sections
  • M 199M/M 199-2008 Standard Specification for Precast Reinforced Concrete Manhole Sections
  • M 199M/M 199-2017 Standard Specification for Precast Reinforced Concrete Manhole Sections
  • T 280-2005 Standard Method of Test for Concrete Pipe@ Manhole Sections@ or Tile (ASTM Designation: C 497-03a)

Xinjiang Provincial Standard of the People's Republic of China, Duplicate wells for detection

  • DB65/T 4617-2022 Specification for detection and evaluation of grouting density in prestressed tunnels of highway bridges

(U.S.) Ford Automotive Standards, Duplicate wells for detection

Society of Motion Picture and Television Engineers (SMPTE), Duplicate wells for detection

  • SMPTE 270-2008 For Motion-Picture Film (65-mm) - Manufacturer-Printed Latent Image Identification Information - 80 Perforation Repeat
  • SMPTE 313-2008 For Motion-Picture Film (65-mm) ?Manufacturer-Printed Latent Image Identification Information ?120 Perforation Repeat

  Duplicate well detection, Hole detection method, Minimum number of duplicate wells, Value of duplicate wells, Statistics of duplicate wells, 3 replicate wells for each detection, multiple wells, Duplicate wells for detection.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved