ZH
RU
ES
Cadmium content in the air
Cadmium content in the air, Total:277 items.
In the international standard classification, Cadmium content in the air involves: Air quality, Analytical chemistry, Construction materials, Transformers. Reactors, Adhesives, Spices and condiments. Food additives, Lubricants, industrial oils and related products, Applications of information technology, Ferrous metals, Tobacco, tobacco products and related equipment, Electronic components in general, Edible oils and fats. Oilseeds, Vocabularies, Insulating fluids, Nuclear energy engineering, Radiation protection, Radiation measurements, Acoustics and acoustic measurements, Internal combustion engines, Rubber and plastics products, Farming and forestry, Products of the chemical industry, Testing of metals, Inorganic chemicals, Electrical wires and cables, Fuels, Protective equipment, Plastics, Galvanic cells and batteries, Measurement of volume, mass, density, viscosity, Power transmission and distribution networks, Alarm and warning systems, Road vehicles in general, Raw materials for rubber and plastics, Fertilizers, Electrical equipment for working in special conditions, Ventilators. Fans. Air-conditioners, Kitchen equipment.
Indonesia Standards, Cadmium content in the air
Japanese Industrial Standards Committee (JISC), Cadmium content in the air
- JIS K 0097:1979 Method for determination of cadmium and lead in stack gas
- JIS A 1118:1997 Method of test for air content of fresh concrete by volumetric method
BE-NBN, Cadmium content in the air
- NBN T 95-401-1979 Determination of the lead, zinc, cadmium, copper, nickel ? and iron content of a gas flow
- NBN T 94-501-1980 Determination of flueride content in ambient air
- NBN T 94-501-1984 Determination of fluoride content in ambient air
- NBN X 44-002-1976 Cleaning equipment for air and other gases - Dust sampling in gas flows and determination of the dustcontents of the gas
- NBN T 94-403-1977 Determination of the cadmium mass in particles collected by air filtration - Atomic absorption spectrophotometry
- NBN T 94-203-1977 Determination of hydrogensulfide content in ambient air - Methylene blue raethod
- NBN T 94-301-1976 Determination of nitrogen dioxyde contents of ambient air -Griess-Saltzman method
- NBN T 94-302-1976 Determination of nitrogen oxydes and of nitrogen monoxyde contents of ambient air - Griess-Saltzman method
- NBN T 94-202-1977 Determination of sulphur dioxide content in ambient air - West and Gaeke method
- NBN T 94-201-1975 Air sampling and analysis methods — Determination of sulphur dioxide (SO2) content in ambient air — Hydrogen peroxide method
- NBN-EN 10036-1992 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen
HU-MSZT, Cadmium content in the air
RO-ASRO, Cadmium content in the air
- STAS SR 11771-13-1994 Natural radioactive nuclides with pollution potential proceededDetermination of radium 226 content in the ambient air from the
- STAS 12052-1982 A I R Determination of 222 radon short life descendants content
ES-AENOR, Cadmium content in the air
European Committee for Standardization (CEN), Cadmium content in the air
- EN 15841:2009 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
- EN 481:1993 Workplace atmospheres; size fraction definitions for measurement of airborne particles
- EN 10036:1989 Chemical Analysis of Ferrous Materials Determination of Total Carbon in Steels and Irons Gravimetric After Combustion in a Stream of Oxygen
- EN 13274-6:2001 Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air
NO-SN, Cadmium content in the air
- NS 4870-1985 Air quality - Acrolein content in workplace atmosphere
- NS 4869-1985 Air quality - Nitrogen dioxide content in workplace atmosphere - Colometric metod
- NS 4859-1983 Air quality - Emission measurement - Manual determination of concentration of sulphur trioxide/sulphuric acid and sulphur dioxide in dustladen gases - Isopropanol method
NL-NEN, Cadmium content in the air
- NEN 2037-1982 Air quality — Reference method for the determination of ozone in air — Photometric determination after absorption in potassium iodide thiosulphate solution
- NEN 5961-1988 Concrete - Determination of air content of fresh concrete (displacement method)
PL-PKN, Cadmium content in the air
- PN Z04036-1970 Determination of ni?robenzene yapours con?en? in air
- PN Z04071-1961 Determination of vapor n-butyl alcohol con?ens in air. Speedy me?hod
- PN Z04102-06-1986 Air purity protection Tests for cadmium and its compounds Determination of cadmium and its compounds in suspended particles in the ambient air (imision) by atomie absorption spectrometry
- PN Z04037-10-1987 Air purity protection Tests for chlorine Determination of chlorine content in the ambient air (imision) by spectrophotometric method with methyl orange
- PN Z04072-1961 Determination of Thionyl Chloride Vaponr Contens in Air. Speedy Method
- PN M73743-01-1993 Pneumatic fluid power. Compressed air filters. Main characteristics to be included in commercial literature and specific requirements
- PN C04207-1988 Rubber vulcanized Determination of resistance to accelerated ageing in hot air by measurement of stress at a given elongation
- PN Z04045-09-1992 Air purity protection ests for content of aldehydes etermination of furfuraldehyde n work places by gas chromatography
- PN Z04020-02-1991 Air purity protection. Tests for elemental carbon content. Determination of elemental carbon in dust in ambient air (immission) by gas chromatography
- PN Z04073-05-1988 Air purity protection Tests for phosphorus and its compounds Determination of phosphorus oxychloride in work places by spectrophotometry in visible light
- PN Z04222-02-1991 Air purity protection. Tests for carbon black content. Determination of carbon black in work places by gravimetric method
- PN Z04152-05-1993 Air purity protection. Tests for styrene content. Determination of styrene in ambient air (imission) by gas chromatography
- PN Z04009-04-1993 Air purity protection. Tests for content of nitrogen and its compounds. Determination of nitrates in dust in ambient air (imission) by spectrophotometric method with sodium salicilate
- PN Z04048-1969 De?ermination of ace?one vapours content in air
- PN Z04225-03-1993 Air purity protection. Tests for hydrogen chloride content. Determination of hydrogen chloride by turbidimetry in workplaces with sampling using gas washing bottles
- PN Z04227-02-1992 Air purity protection ests for kerosene content etermination of kerosene vapours n work places by gas chromatography
- PN Z04005-03-1987 Air purity protection Tests for alkalies Determination of potassium hydroxide in work places by colorimetric method
- PN Z04005-04-1987 Air purity protection Tests for alkalies Determination of potassium hydroxide in work places by potentiometric method
- PN M73742-1992 Pneumatic fluid power. Air line pressure regulators. Main characteristics to be included in commercial literature and specifid requirements
- PN Z04030-05-1991 Air purity protection Tests for dust Determination of total dust in work places by filtration-gravimetric method
- PN Z04224-02-1992 Air punty protection Tests for propyl alcohol content Determination of isopropyl alcohol in work places by gas chromatography
- PN Z04226-02-1992 Air purity protection -- Tests for individual toxic substances compounds (in their mixtures) in indoor air -- Determination of semi-volatile substances vapours emitted from materials and products applied in building, containing bitumens and their chlorode
- PN Z04094 Arkusz 01-1974 Air puri?y protection Tests tor carbon monoxide Determinalion of carbon monoxide in work s?a?ion by iodometric method
- PN Z04159-05-1993 Air purity protection. Tests for phenol content. Determination of phenol in ambient air (imission) by gas chromatography
- PN Z04009-03-1990 Air purity protection Tests for nitrogen compounds Determination of ammonia in work places by spectrophotometry in visible spectra] region, indopheno] method
Standard Association of Australia （SAA）, Cadmium content in the air
- AS 1012.4.3:1999 Methods of testing concrete - Determination of air content of freshly mixed concrete - Measuring air volume when concrete dispersed in water
- AS 1012.4.3:2014 Methods of testing concrete, Method 4.3: Determination of air content of freshly mixed concrete — Measuring air volume when concrete is dispersed in water
Danish Standards Foundation, Cadmium content in the air
- DS/EN 15841:2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
- DS/EN 10036:1989 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen
- DS/EN ISO 10720:2007 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas
- DS/CEN/TS 15675:2008 Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements
- DS/EN ISO 15351:2010 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method)
- DS/EN ISO 5135:1999 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
- DS/EN 13274-6:2002 Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air
Lithuanian Standards Office , Cadmium content in the air
- LST EN 15841-2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
- LST EN ISO 10720:2007 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997)
- LST EN ISO 15351:2010 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999)
- LST EN 13274-6-2002 Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air
- LST EN ISO 5135:2002 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997)
AENOR, Cadmium content in the air
- UNE-EN 15841:2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
- UNE-CEN/TS 15675:2009 EX Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements
- UNE 60403:2005/2M:2013 Interrupting security valve on minimun pressure for gas installations with a flow of up to 4,8 m3 (n)/h of air.
- UNE 60403:2005 Interrupting security valve on minimun pressure for gas installations with a flow of up to 4,8 m3 (n)/h of air.
- UNE 60403:2005/1M:2007 Interrupting security valve on minimun pressure for gas installations with a flow of up to 4,8 m3 (n)/h of air.
- UNE-EN ISO 10720:2008 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997)
- UNE-EN ISO 15351:2011 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999)
German Institute for Standardization, Cadmium content in the air
- DIN EN 15841:2010-04 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition; German version EN 15841:2009
- DIN EN 15841:2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition; German version EN 15841:2009
- DIN EN ISO 15351:2010-08 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999); German version EN ISO 15351:2010
- DIN EN ISO 11114-3:2011-04 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010); German version EN ISO 11114-3:2010
- DIN EN 10036:1990 Chemical analysis of ferrous materials; determination of total carbon in steel and iron; gravimetric method after combustion in a stream of oxygen; German version EN 10036:1989
- DIN EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas; German version EN 10276-2:2003
- DIN ISO 16000-3:2013 Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method (ISO 16000-3:2011)
- DIN 33897-3:2016-08 Workplaces atmospheres - Routine methods for the determination of dustiness of bulk materials - Part 3: Dust production in still air
- DIN EN 13274-6:2002-03 Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air; German version EN 13274-6:2001
- DIN EN ISO 6883:2017 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) (ISO 6883:2017); German version EN ISO 6883:2017
- DIN EN ISO 6883:2014 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) (ISO 6883:2007); German version EN ISO 6883:2014
- DIN EN ISO 23861:2023 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
- DIN ISO 16000-6:2012 Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TAę sorbent, thermal desorption and gas chromatography using MS or MS-FID (ISO 16000-6:2011)
- DIN 51352-2:1985 Testing of lubricants; determination of ageing characteristics of lubricating oils; Conradson carbon residue after ageing by passing air through the lubricating oil in the presence of iron(III)oxide
YU-JUS, Cadmium content in the air
- JUS U.M1.031-1982 Concrete. Determ inati on of air conteints in fresh concrete
- JUS Z.B0.001-1991 Safety precautions. Maximum allowable concentrations of toxic gases vapours and aerosols in working premises atmosphere
- JUS B.H8.080-1996 Petroleum and petroleum products - Determination of aromatic hydrocarbons content in light naphthas and aviation gasolines - Gas chromatographic method
Group Standards of the People's Republic of China, Cadmium content in the air
- T/FSI 102-2023 Determination of Hydrogen Content in Hydrogen Silicone Oil by Headspace Gas Chromatography
- T/BSM 0001-2023 Determination of hydrogen content in hydrogen water Headspace gas chromatographic method
- T/FSI 103-2023 Determination of vinyl content in vinyl silicone oil and methyl vinyl silicone rubber by headspace gas chromatography
Association Francaise de Normalisation, Cadmium content in the air
- NF X43-256:1988 AIR QUALITY. WORKPLACE AIR. SAMPLING AND DETERMINATION OF LEAD AIRBONE PARTICULATE MATTER.
- NF X43-011:1975 Air pollution. Determination of gaseous sulphur compounds in ambient air sampling equipment and method.
- NF X43-027:1993 Air quality. Ambient air. Determination of lead in aerosols X-ray fluorescence spectrometry.
- NF E51-731*NF EN 13182:2002 Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces
- NF EN 14902:2005 Qualité de l'air ambiant - Méthode normalisée pour la mesure du plomb, cadmium, de l'arsenic et du nickel dans la fraction MP10 de la matière particulaire en suspension
- NF EN 12255-15:2004 Stations d'épuration - Partie 15 : mesurage du transfert d'oxygène en eau claire dans les bassins d'aération des stations d'épuration à boues activées
- NF X43-019:1983 Atmospheric pollution. Determination of the sulphur dioxide content of the ambient air by means of ultraviolet fluorescence.
- NF M60-766:2004 Nuclear energy - Measurement of radioactivity in the enviromment - Air - Radon 222 : methods for integrated measurement of the average volumic activity of radon in the atmospheric environment, with a passive collection and an deferred analysis.
- NF E37-216:1997 Reciprocating internal combustion engines. Measurement of emitted airborne noise. Engineering method and survey method.
- NF T60-214:1995 Animal and vegetable fats and oils. Determination of conventional mass per volume ("litre weight in air").
- NF A06-301:1989 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen.
- NF X43-404-3*NF ISO 16000-3:2011 Indoor air - Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Part 3 : Active sampling method.
- NF M60-763:2004 Nuclear energy - Measurement of radioactivity in the enviromment - Air - Radon 222 and its short-life decay products in the atmospheric environment : their origins and measuring methods.
- NF M60-763:1998 Nuclear energy. Measurement of radioactivity in the environment-Air. Radon 222 and its short-life decay products in the atmospheric environment : their origins and measuring methods.
- XP ISO/TS 21361:2019 Nanotechnologies - Méthode de quantification des concentrations dans l'air de noir de carbone et de silice amorphe à l'échelle nanométrique dans un environnement de fabrication industrielle contenant des mélanges de poussières
- NF A06-392-2*NF EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2 : infrared method after fusion under inert gas.
- NF EN ISO 11665-3:2020 Mesurage de la radioactivité dans l'environnement - Air : radon 222 - Partie 3 : méthode de mesure ponctuelle de l'énergie alpha potentielle volumique de ses descendants à vie courte
- NF X43-035*NF EN 16913:2017 Ambient air - Standard method for measurement of NO3-, SO42-, Cl-, NH4+, Na+, K+, Mg2+, Ca2+ in PM2,5 as deposited on filters
- NF E49-320-2*NF ISO 6301-2:2019 Pneumatic fluid power - Compressed-air lubricators - Part 2 : test methods to determine the main characteristics to be included in supplier's literature
- NF X43-404-6:2012 Indoor air - Part 6 : determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA(R) sorbent, thermal desorption and gas chromatography using MS or MS/FID.
- NF U42-125:1985 Fertilizers. Determination of ammoniacal nitrogen content in the presence of other substances which release ammonia when treated with sodium hydroxide. Titrimetric method.
- NF S76-007-6*NF EN 13274-6:2002 Respiratory protective devices - Methods of test - Part 6 : determination of carbon dioxide content of the inhalation air.
- NF EN 13274-6:2002 Appareils de protection respiratoire - Méthodes d'essai - Partie 6 : détermination de la teneur en dioxyde de carbone de l'air inhalé
- NF X43-015:1976 Air pollution. Nitrogen dioxide content of atmospheric air. Method of determination by collection on a triethanolamine-impregnated filter.
- NF M60-763-3*NF EN ISO 11665-3:2020 Measurement of radioactivity in the environment - Air: radon-222 - Part 3 : spot measurement method of the potential alpha energy concentration of its short-lived decay products
- NF EN ISO 11665-2:2019 Mesurage de la radioactivité dans l'environnement - Air : radon 222 - Partie 2 : méthode de mesure intégrée pour la détermination de l'énergie alpha potentielle volumique moyenne de ses descendants à vie courte
- NF EN 16913:2017 Air ambiant - Méthode normalisée pour le mesurage de NO3-, SO42-, Cl-, NH4+, Na+, K+, Mg2+, Ca2+ dans la fraction PM2,5 telle que déposée sur des filtres
- FD X43-070-2:2015 Air quality - Practical guidance for estimating the uncertainty of measurement of pollutant concentration in ambient air - Part 2 : estimation of the uncertainties associated with the automated measurements of SO2, NO, NOx, NO2, O3 and CO carried out on s
IN-BIS, Cadmium content in the air
Professional Standard - Electricity, Cadmium content in the air
- DL 423-1991 Determination of gas content in insulating oil Differential-vacuum-pressure method
- DL/T 1824-2018 Method for the determination of acetone content in operating transformer oil by headspace gas chromatography
IX-SA, Cadmium content in the air
British Standards Institution (BSI), Cadmium content in the air
- BS EN 12023:1997 Self adhesive tapes - Measurement of water vapour transmission in a warm humid atmosphere
- BS ISO 16000-38:2019 Indoor air - Determination of amines in indoor and test chamber air. Active sampling on samplers containing phosphoric acid impregnated filters
- BS EN 10276-2:2003 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Infrared method after fusion under inert gas
- BS EN 1015-7:1999 Methods of test for mortar for masonry - Determination of air content of fresh mortar
- BS ISO 18301:2014 Animal and vegetable fats and oils. Determination of conventional mass per volume (litre weight in air). Oscillating U-tube method
- BS EN 13274-6:2002 Respiratory protective devices - Methods of test - Determination of carbon dioxide content of the inhalation air
- BS 1747-13:1994 Methods for measurement of air pollution. Determination of the particulate lead content of aerosols collected on filters: atomic absorption spectrometric method
- BS EN 10036:1991 Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen
- BS EN 10036:1991(1999) Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen
- BS EN ISO 11665-3:2020 Measurement of radioactivity in the environment. Air: radon-222 - Spot measurement method of the potential alpha energy concentration of its short-lived decay products
- BS ISO 16000-6:2012 Indoor air. Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID
- BS ISO 11665-3:2012 Measurement of radioactivity in the environment. Air: radon-222. Spot measurement method of the potential alpha energy concentration of its short-lived decay products
- BS EN 50055:1991 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (V/V) methane in air
- BS EN 50055:1999 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (V/V) methane in air
- BS EN 50056:1999 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 100% (V/V) methane in air
- 21/30394853 DC BS EN ISO 23861. Workplace air. Chemical agent present as a mixture of airborne particles and vapours. Requirements for evaluation of measuring procedures using samplers
- BS EN 61779-2:2000 Electrical apparatus for the detection and measurement of flammable gases - Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in the air
- BS EN 61779-3:2000 Electrical apparatus for the detection and measurement of flammable gases - Performance requirements for group I apparatus indicating a volume fraction up to 100% methane in air
- BS ISO 17735:2009 Workplace atmospheres - Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography
- BS 6020-2:1981 Instruments for the detection of combustible gases - Specification for safety and performance requirements for Group I instruments reading up to 5% methane in air
Professional Standard - Forestry, Cadmium content in the air
- LY/T 1221-1999 Determination of carbon dioxide content in forest soil air
FI-SFS, Cadmium content in the air
SE-SIS, Cadmium content in the air
- SIS SS-EN 50 055-1992 Electrical apparatusfor the detection and measurement ofcombustible gases - Performance requirements for Group I apparatus indicating upto5% (v/v) methane in air
PT-IPQ, Cadmium content in the air
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Cadmium content in the air
AR-IRAM, Cadmium content in the air
Professional Standard - Petrochemical Industry, Cadmium content in the air
- NB/SH/T 0474-2010 Standard test method for gasoline diluent in used gasoline engine oils by gas chromatography
- SH/T 0713-2002 Standard test method for determination of benzene and toluene in finished motor and aviation gasoline by gas chromatography
CZ-CSN, Cadmium content in the air
- CSN EN 10 036-1993 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen
- CSN ISO 4848:1994 Concrete.Determinatin of air content of freshly mixed concrete.Pressure method
Korean Agency for Technology and Standards (KATS), Cadmium content in the air
- KS X ISO TR 19167:2021 Application of ubiquitous public access to-geographic information to an air quality information service
- KS L 3136-2021 Standard test method for air content of hydraulic cement mortar
- KS D ISO 10700-2008(2018) Steel and iron－Determination of manganese content－Flame atomic absorption spectrometric method
- KS M 1081-2008 Ceramic fuse in electrotechnical products－Determination of lead and cadmium－Atomic spectrometry
- KS I ISO 16000-3:2008 Indoor air-Part 3:Determination of formaldehyde and other carbonyl compounds-Active sampling method
- KS I ISO 16000-3:2014 Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — N sampling method
- KS I ISO 9855-2005(2020) Ambient air－Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
- KS I ISO 13794-2008(2018) Ambient air－Determination of asbestos fibres－Indirect-transfer transmission electron microscopy method
- KS T ISO 14853-2012(2017) Plastics ― Determination of the ultimate anaerobic biodegradability in an aqueous system ― Method by measurement of biogas
- KS C IEC 61779-2:2003 Electrical apparatus for the detection and measurement of flammable gases－Part 2 : Performance requirements for group Iapparatus indicating a volume fraction up to 5% methane in air
- KS A 0080-2007 Electrostatic dust sampler and measuring method for mass of airborne dust by the electrostatic dust sampler
- KS I ISO 16000-6:2004 Indoor air-Part 6:Determination of volatile organic compounds inindoor and test chamber air by active sampling on Tenax TA sorbent,thermal desorption and gas chromatography using MS/FID
- KS I ISO 16000-6:2014 Indoor air — Part 6: Determination of volatile organic compounds in indoor and test chamber air by N sampling on Tenax TA® sorbent, thermal desorption and gas chromatography using MS or MS/FID
- KS B 6741-1995(2000) MEASURING METHODS FOR AIRBORN PARTICLES IN CLEAN ROOM AND EVALUATING METHODS FOR AIR CLEANLINESS OF CLEAN ROOM
- KS M 9900-2007 Measuring methods for airborn particles in clean room and evaluating methods for air cleanliness of clean room
- KS I 30011-2012 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
- KS B ISO 8960:2005 Refrigerators, frozen-food storage cabinets and food freezers for household and similar use－measurement of emission of airborne acoustical noise
- KS B ISO 8960:2009 Refrigerators, frozen-food storage cabinets and food freezers for household and similar use－measurement of emission of airborne acoustical noise
KR-KS, Cadmium content in the air
- KS X ISO TR 19167-2021 Application of ubiquitous public access to-geographic information to an air quality information service
- KS F 2449-2022 Test method for air content of fresh concrete by the volumetric method
- KS B ISO 8960-2005 Refrigerators, frozen-food storage cabinets and food freezers for household and similar use－measurement of emission of airborne acoustical noise
International Organization for Standardization (ISO), Cadmium content in the air
- ISO/TR 19167:2019 Application of ubiquitous public access to-geographic information to an air quality information service
- ISO 6883:1987 Animal and vegetable fats and oils; Determination of mass per unit volume ("litre weight") in air
- ISO 11454:1997 Tobacco and tobacco products - Determination of vapour-phase nicotine in air - Gas-chromatographic method
- ISO 6883:1995 Animal and vegetable fats and oils - Determination of conventional mass per volume ("litre weight in air")
- ISO 16000-3:2011 Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method
- ISO 18301:2014 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) - Oscillating U-tube method
- ISO 6883:1995/Cor 1:1996 Animal and vegetable fats and oils - Determination of conventional mass per volume ("litre weight in air"); Technical corrigendum 1
- ISO 16000-6:2011 Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID
- ISO 16000-6:2004 Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID
- ISO 11665-3:2020 Measurement of radioactivity in the environment — Air: radon-222 — Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products
- ISO 21846:2018 Vegetable fats and oils — Determination of composition of triacylglycerols and composition and content of diacylglycerols by capillary gas chromatography
RU-GOST R, Cadmium content in the air
- GOST 30570-2003 Cigarettes. Determination of nicotine content in smoke condensate. Gas-chromatographic method
- GOST R ISO 16000-38-2021 Indoor air. Part 38. Determination of amines in indoor and test chamber air. Active sampling on samplers containing phosphoric acid impregnated filters
- GOST R 51206-2004 Motor vehicles. Content of pollutants in the air of passenger compartment and cabin. Norms and test methods
- GOST R 51206-1998 Automobile vehicles. Content of harmful substances in air of cabin and saloon. Rates and methods of determination
- GOST IEC 61779-3-2006 Electrical apparatus for the detection and measurement of flammable gases. Part 3. Performance requirements for group I apparatus indicating a volume fraction up to 100% methane in air
- GOST IEC 61779-2-2006 Electrical apparatus for the detection and measurement of flammable gases. Part 2. Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in air
BR-ABNT, Cadmium content in the air
- ABNT NBR 16887-2020 Concrete - Determination of air content of freshly mixed concrete - Pressure method
Guangdong Provincial Standard of the People's Republic of China, Cadmium content in the air
- DB44/T 1031-2012 Determination of Methanol Content in Pulping Waste Liquid by Headspace Gas Chromatography
- DB44/T 1030-2012 Determination of Carboxylic Acid Group Content in Pulp by Headspace Gas Chromatography
- DB44/T 1157-2013 Determination of Oxalate Content in Pulp Bleaching Wastewater by Headspace-Gas Chromatography
- DB44/T 1027-2012 Determination of Carbonate Content in Alkali Pulping Black Liquor by Headspace Gas Chromatography
- DB44/T 1158-2013 Determination of Residual Hydrogen Peroxide Content in Pulp Bleaching Wastewater by Headspace-Gas Chromatography
国家市场监督管理总局、中国国家标准化管理委员会, Cadmium content in the air
- GB/T 39560.5-2021 Determination of certain substances in electrical and electronic products—Part 5: Cadmium，lead and chromium in polymers and electronics and cadmium and lead in metals by AAS，AFS，ICP-OES and ICP-MS
- GB/T 38234-2019 Determination of fatty acid methyl esters (FAME) in aviation turbine fuel—Gas chromatography-mass spectrometry
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Cadmium content in the air
- GB/T 33916-2017 Animal and vegetable fats and oils—Determination of conventional mass per volume (liter weight in air)
Hunan Provincial Standard of the People's Republic of China, Cadmium content in the air
- DB43/T 1652-2019 Determination of Calcium Carbonate Content in Tissue Paper by Headspace Gas Chromatography
American Society for Testing and Materials (ASTM), Cadmium content in the air
- ASTM D7166-10 Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
- ASTM D6023-02 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
- ASTM D6023-96 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
- ASTM C231/C231M-10 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C1179-91(2000) Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
- ASTM C231-97e1 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C231/C231M-22 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C231-08 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C231-08a Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C231-08b Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C231-08c Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C231-09 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C231-09a Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C1179-15 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
- ASTM D8446-22 Standard Test Method for Water Vapor Content in Compressed Air Using Electronic Moisture Analyzers
- ASTM C231-04 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C231-03 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C231/C231M-09b Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C1179-21 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
- ASTM D6886-03(2009) Standard Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy
- ASTM C231/C231M-14 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM D2685-95(2003) Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography
- ASTM D2685-11 Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography
- ASTM D7493-22 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
- ASTM D5578-94(1999)e1 Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
- ASTM D3606-10 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
- ASTM D7493-14 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
Professional Standard - Energy, Cadmium content in the air
- NB/SH/T 0707-2016 Determination of Benzene and Toluene in Paraffin Waxes by Headspace Injection Gas Chromatography
国家能源局, Cadmium content in the air
- SH/T 0707-2016 Determination of benzene and toluene content in paraffin wax by headspace sampling gas chromatography
IT-UNI, Cadmium content in the air
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Cadmium content in the air
- GB/T 41682-2022 Determination of headspace gas content in plastic packaging container for food—Sensor method
- GB 24428-2009 Limitation of mercury content for zinc silver oxide,zinc oxygen and zinc manganese dioxide button batteries
- GB 20936.2-2009 Electrical apparatus for the detection and measurement of flammable gases.Part 2:Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in air
- GB/T 20936.3-2009 Electrical apparatus for the detection and measurement of flammable gases.Part 3:Performance requirements for group I apparatus indicating a volume fraction up to 100% methane in air
Inner Mongolia Provincial Standard of the People's Republic of China, Cadmium content in the air
- DB15/T 3075-2023 Determination Method of Harmful Microorganisms in the Air of Large-scale Sheep Farms
国家质量监督检验检疫总局, Cadmium content in the air
- SN/T 4949-2017 Determination of dioxane content in detergent products by headspace gas chromatography-mass spectrometry
American National Standards Institute （ANSI), Cadmium content in the air
- ANSI/ASTM C1179:2000 Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Cadmium content in the air
- ASHRAE OR-05-8-6-2005 Feasibility Study of Using Various Instruments for Measurement of Air Motion in a Test Room
- ASHRAE 3796-1994 Temperature-Based Variable for Monitoring Outdoor Coil Airflow in an Air-Source Heat Pump During Frost-Forming Conditions
VN-TCVN, Cadmium content in the air
- TCVN 6117-2010 Animal and vegetable fats and oils.Determination of conventional mass per volume (litre weight in air)
Military Standard of the People's Republic of China-General Armament Department, Cadmium content in the air
- GJB 533.35-1991 Methods for detecting air components in submarine cabins. Determination of cadmium, copper and lead content. Graphite furnace atomic absorption spectrophotometry.
- GJB 533.35A-2021 Methods for testing air components in submarine cabins - Part 35: Determination of cadmium, copper and lead content - Graphite furnace atomic absorption spectrophotometry
Professional Standard - Commodity Inspection, Cadmium content in the air
- SN/T 2268-2009 Determination of organic volatiles in enameled wire.Headspace.GC-MS method
- SN/T 3626-2013 Determination of hexanal in edible oil for export.Headspace-SPME-GC method
Association of German Mechanical Engineers, Cadmium content in the air
- VDI 4252 Blatt 2-2004 Measurement of airborne microorganisms and viruses in ambient air - Active sampling of bioaerosols - Separation of airborne mould on gelatine/polycarbonate filters
National Aeronautics and Space Administration (NASA), Cadmium content in the air
- NASA NACA-RM-E53J07-1954 Measurement of heat-transfer and friction coefficients for flow of air in noncircular ducts at high surface temperatures
The American Road & Transportation Builders Association, Cadmium content in the air
SG-SPRING SG, Cadmium content in the air
- SS 78 Pt.A6-1987 Testing Concrete Part A6: Methods For Determination Of Air Content Of Fresh Concrete
- SS 300 Pt.1-1985 SPECIFICATION FOR Methods Of Test For Gases Evolved During Combustion Of Electric Cables Part 1 : Method For Determination Of Amount Of Halogen Acid Gas Evolved During Combustion Of Polymeric Materials Taken From Cables
海关总署, Cadmium content in the air
- HS/T 40-2013 Determination of toluene, acetone and butanone in paints by headspace gas chromatography-mass spectrometry
工业和信息化部, Cadmium content in the air
- SH/T 1831-2020 Determination of free acrylonitrile content in acrylonitrile-butadiene rubber by headspace gas chromatography
ES-UNE, Cadmium content in the air
- UNE-EN 16913:2018 Ambient air - Standard method for measurement of NO3¯, SO4²¯, Cl¯, NH4+, Na+, K+, Mg²+, Ca²+ in PM2,5 as deposited on filters
- UNE-EN 13274-6:2002 Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air.
- UNE-EN ISO 11665-3:2020 Measurement of radioactivity in the environment - Air: radon-222 - Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products (ISO 11665-3:2020) (Endorsed by Asociación Española de Normalización in ...
TH-TISI, Cadmium content in the air
- TIS 15.13-1978 Standard for portland cement.part 13: standard method of test for air content of hydraulic cement mortar
ZA-SANS, Cadmium content in the air
- SANS 6164:1990 Determination of lead (inorganic and tetra-alkyl) in workplace air by atomic absorption spectrophotometry