ZH
RU
ES
Calculation of total hydrocarbons
Calculation of total hydrocarbons, Total:188 items.
In the international standard classification, Calculation of total hydrocarbons involves: Electrical wires and cables, Equipment for petroleum and natural gas industries, Natural gas, Water quality, Organic chemicals, Shipbuilding and marine structures in general, Microprocessor systems, Interior finishing, Applications of information technology, Fuels, Industrial automation systems, Optics and optical measurements, Protection of and in buildings, Shafts and couplings, Radiocommunications, Environmental protection, Vocabularies, Construction industry, Telecommunication systems, Non-ferrous metals, Thermodynamics and temperature measurements, Air quality, Rubber, Elements of buildings, Petroleum products in general, Lifting equipment, Products of the chemical industry, Wastes, Small craft, Aerospace engines and propulsion systems, Coals, Lubricants, industrial oils and related products, Leather technology, Technical product documentation, Animal feeding stuffs, Metrology and measurement in general, Earthworks. Excavations. Foundation construction. Underground works, Gears.
IN-BIS, Calculation of total hydrocarbons
International Electrotechnical Commission (IEC), Calculation of total hydrocarbons
- IEC TR 60771:1983 Calculation of maximum overall diameter of cables and specification of minimum tensile strength of suspension strand for low-frequency cables with polyolefin insulation and moisturebarrier polyolefin sheath
- IEC 60287-1-1:2023 CMV Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
- IEC 60287-1-1:2001 Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100% load factor) and calculation of losses; General
- IEC 60287-1-1:1994 Electric cables - Calculation of the current rating - Part 1: Current rating equations (100% load factor) and calculation of losses; section 1: General
- IEC 60287-1-1/COR1:2006 Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100% load factor) and calculation of losses - General; Corrigendum 1
- IEC 60287-1-1:2006 Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
International Organization for Standardization (ISO), Calculation of total hydrocarbons
- ISO 6578:1991 Refrigerated hydrocarbon liquids; static measurement; calculation procedure
- ISO 6578:2017 Refrigerated hydrocarbon liquids - Static measurement - Calculation procedure
- ISO 7278-1:1987 Liquid hydrocarbons; Dynamic measurement; Proving systems for volumetric meters; Part 1: General principles
- ISO/TR 8338:1988 Crude petroleum oil; transfer accountability; method for estimation on ships of total quantity remaining on board (ROB)
- ISO 6122:1978 Surface active agents; Technical alkane sulphonates; Determination of total alkane sulphonates content
- ISO 10077-1:2006 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General
- ISO 10077-1:2017 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General
- ISO 1928:1995 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value
British Standards Institution (BSI), Calculation of total hydrocarbons
- BS ISO 6578:2017 Refrigerated hydrocarbon liquids. Static measurement. Calculation procedure
- BS EN ISO 23874:2018 Natural gas. Gas chromatographic requirements for hydrocarbon dewpoint calculation
- BS 7577:1992 Specification for calculation procedures for static measurement of refrigerated light hydrocarbon fluids
- BS EN 13363-2:2005 Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Detailed calculation method
- BS EN 13363-2:2005(2006) Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Detailed calculation method
- BS ISO 7278-1:1990 Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters. General principles
- BS IEC 60287-1-1:2007 Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - General
- BS ISO 16881-1:2005 Cranes - Design calculation for rail wheels and associated trolley track supporting structure - General
- PD IEC/TR 60865-2:2015 Short-circuit currents. Calculation of effects. Examples of calculation
- BS ISO 1928:2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
- BS EN 50672:2017 Ecodesign requirements for computers and computer servers
- BS EN ISO 13567-1:2002 Technical product documentation. Organization and naming of layers for CAD. Overview and principles
- BS IEC 60287-2-1+A2:1997 Electric cables. Calculation of the current rating. Thermal resistance. Calculation of thermal resistance
- BS IEC 60287-2-1:1994+A2:2006 Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance
- BS IEC 60287-2-1:2015 Electric cables. Calculation of the current rating. Thermal resistance. Calculation of thermal resistance
- BS ISO 10300-3:2014 Calculation of load capacity of bevel gears. Calculation of tooth root strength
- BS ISO 10300-3:2023 Calculation of load capacity of bevel gears - Calculation of tooth root strength
NL-NEN, Calculation of total hydrocarbons
YU-JUS, Calculation of total hydrocarbons
CZ-CSN, Calculation of total hydrocarbons
American Society for Testing and Materials (ASTM), Calculation of total hydrocarbons
- ASTM D875-64 Method for Calculating of Olefins and Aromatics in Petroleum Distillates from Bromine Number and Acid Absorption
- ASTM D875-64(1978) Method for Calculating of Olefins and Aromatics in Petroleum Distillates from Bromine Number and Acid Absorption
- ASTM D1555M-00 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons [Metric]
- ASTM D1555M-04e1 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
- ASTM D1555M-04 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
- ASTM D1555M-08e1 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
- ASTM D7675-22 Standard Test Method for Determination of Total Hydrocarbons in Hydrogen by FID-Based Total Hydrocarbon (THC) Analyzer
- ASTM D1555-04e1 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
- ASTM D1555-04 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
- ASTM D1555-04a Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
- ASTM D1555-09 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
- ASTM D1555-16 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
- ASTM D1555-21 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
- ASTM D1555M-04a Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
- ASTM D1555-95(2000) Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons
- ASTM D1555M-16 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
- ASTM D1555M-22 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
- ASTM D1555M-08 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
- ASTM D7675-15 Standard Test Method for Determination of Total Hydrocarbons in Hydrogen by FID-Based Total Hydrocarbon (THC) Analyzer
- ASTM UOP938-10 Total Mercury and Mercury Species in Liquid Hydrocarbons
- ASTM D8001-16e1 Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography
- ASTM D8001-16 Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography
Korean Agency for Technology and Standards (KATS), Calculation of total hydrocarbons
- KS I ISO 23874-2010(2016) Natural gas－Gas chromatographic requirements for hydrocarbon dewpoint calculation
- KS M ISO 6578-2003(2008) Refrigerated hydrocarbon liquids－Static measurement－Calculation procedure
- KS D ISO 11436:2001 Nickel and nickel alloys－Determination of total boron content －Curcumin molecular absorption spectrometric method
- KS M ISO 6122-2007(2017) Surface active agents－Technical alkane sulphonates－Determination of total alkane sulphonates content
- KS M ISO 6122-2007(2022) Surface active agents－Technical alkane sulphonates－Determination of total alkane sulphonates content
- KS C IEC 60287-1-1:2008 Electric cables－Calculation of the current rating－Part 1-1：Current rating equations(100 % load factor)and calculation of losses－General
Professional Standard - Petroleum, Calculation of total hydrocarbons
- SY/T 6042-1994 Calculation method for dynamic metering of liquefied petroleum gas and stable light hydrocarbons
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Calculation of total hydrocarbons
- GB/T 30492-2014 Natural gas.Gas chromatographic requirements for hydrocarbon dewpoint calculation
- GB/T 24962-2010 Refrigerated hydrocarbon liquids.Static measurement.Calculation procedure
- GB/T 15275-1994 Standard for an 8-bit microcomputer bus system:STD bus
- GB/T 26803.1-2011 Industrial control computer system.Bus.Part 1:General description
- GB/T 24589.3-2011 Financial information technology.Data interface of accounting software.Part 3:Public finance budgetary accounting
- GB/T 26477.1-2011 Cranes.Design calculation for rail wheels and associated trolley track supporting structure.Part 1:General
- GB/T 15263-1994 Ambient air-Determination of total hydrocarbons-Gas chromatographic method
- GB/T 11987-1989 Surface active agent--Technical alkane sulphonates--Determination of total alkane sulphonates content
- GB/T 11987-2022 Surface active agents—Technical alkane sulphonates—Determination of total alkane sulphonates content
- GB 11987-1989 Determination of total alkane sulfonate content in surfactant industry alkane sulfonate
国家能源局, Calculation of total hydrocarbons
- SY/T 6042-2019 Dynamic measurement calculation method for liquefied petroleum gas and stable light hydrocarbons
Professional Standard-Ships, Calculation of total hydrocarbons
- CB/T 3484-2005 Compensated gross ton calculation for civil ship
- CB/T 3484-2011 Compensated gross ton calculation for civil ship
- CB/T 3472-2019 Calculation method of overall free vibration of ship
- CB/T 3472-1992 Calculation method of overall free vibration of ship
- CB*/Z 332-1983 Calculation method of longitudinal bending moment and shear force of ship
- CB/Z 275-2008 Load classifying and caculation of weight and gravity center in submarine block method of hull construction
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Calculation of total hydrocarbons
- IEEE 796-1983 Standard Microcomputer System Bus (IEEE Computer Society Document)
- IEEE 959-1987 STANDARD SPECIFICATIONS FOR AN I/O EXPANSION BUS: SBX BUS (IEEE COMPUTER SOCIETY DOC.)
- IEEE 959-1988 Standard Specifications for an I/O Expansion Bus: SBX Bus (IEEE Computer Society Document)
- IEEE 1212-1991 STANDARD CONTROL AND STATUS REGISTER (CSR) ARCHITECTURE FOR MICROCOMPUTER BUSES; (IEEE COMPUTER SOCIETY DOCUMENT)
- IEEE 1149.4-2010 A Mixed-Signal Test Bus (IEEE Computer Society)
- IEEE 1212-2001 Standard for a Control and Status Registers (CSR) Architecture for Microcomputer Buses (IEEE Computer Society Document)
- IEEE 1394-1995 Standard for a High Performance Serial Bus (IEEE Computer Society Document)
API - American Petroleum Institute, Calculation of total hydrocarbons
- API MPMS 14.5-2009 Calculation of Gross Heating Value@ Relative Density@ Compressibility and Theoretical Hydrocarbon Liquid Content for Natural Gas Mixtures for Custody Transfer (THIRD EDITION)
BELST, Calculation of total hydrocarbons
- STB 1364.3-2015 Totalizing cash registers and special computer systems. Additional requirements to totalizing cash registers and special computer systems used in human services
- STB 1364.6-2015 Totalizing cash registers and special computer systems. Additional requirements for totalizing cash registers and special computer systems used at gas stations
- STB 1364.2-2015 Totalizing cash registers and special computer systems. Additional requirements to totalizing cash registers and special computer systems used in distributive trade
- STB 1364.5-2015 Totalizing cash registers and special computer systems. Additional requirements to totalizing cash registers and special computer systems used for clearing off in public catering objects
- STB 1364.0-2015 Totalizing cash registers and special computer systems. General specifications
- STB 1364.4-2015 Totalizing cash registers and special computer systems. Additional requirements to totalizing cash registers built into taximeters
- STB 1364.1-2002 Totalizing cash registers and special computer systems. Terms and definitions
RU-GOST R, Calculation of total hydrocarbons
- GOST R 54851-2011 Building envelope insimilar. Calculation reduced total thermal resistances
- GOST 28656-1990 Liquefied hydrocarbon gases. Calculation method for density and saturated vapours pressure
- GOST 147-2013 Solid mineral fuel. Determination of gross calorific value and calculation of net calorific value
- GOST R 56162-2014 Air pollution emissions. Method of calculating vehicles emissions under summary computational modeling for urban settlements
- GOST 29040-1991 Gasolines. Method of determination of benzene and total aromatics
- GOST 33702-2015 Accounting systems of hydrocarbon condensate, liquefied hydrocarbon gas and long distillate of light hydrocarbons. General requirement for procedure of measurements
Natural Gas Processor's Association (NGPA), Calculation of total hydrocarbons
- GPA STD 2172-2014 Calculation of Gross Heating Value@ Relative Density@ Compressibility and Theoretical Hydrocarbon Liquid Content for Natural Gas Mixtures for Custody Transfer (Third Edition)
Group Standards of the People's Republic of China, Calculation of total hydrocarbons
- T/ZGTXXH 051-2023 System architecture and requirements of edge computing plus
- T/ZGTXXH 010-2021 System Architecture and Requirements of Edge Computing
- T/CCEAS 003-2022 Standard method of measurement of public works in EPC and DB projects
- T/CCEAS 002-2022 Standard method of measurement of building works in EPC and DB projects
- T/IAC 32-2019 Insurance industry cloud computing scenario and overall framework
- T/CCEAS 004-2022 Standard method of measurement of urban rail transit works in EPC and DB projects
Military Standard of the People's Republic of China-General Armament Department, Calculation of total hydrocarbons
Universal Oil Products Company (UOP), Calculation of total hydrocarbons
- UOP 730-2009 Total Oxygen in Liquid Hydrocarbons by Pyrolysis
GOSTR, Calculation of total hydrocarbons
- GOST 28656-2019 Liquefied hydrocarbon gases. Calculation method for determination of saturated vapour density and pressure
- GOST R 56162-2019 Emissions of polluting substances into the atmosphere. Method for calculating the amount of pollutant emissions generated by motor vehicle flows on roads of various categories
Institute of Electrical and Electronics Engineers (IEEE), Calculation of total hydrocarbons
Professional Standard - Aviation, Calculation of total hydrocarbons
IT-UNI, Calculation of total hydrocarbons
German Institute for Standardization, Calculation of total hydrocarbons
- DIN 743-1:2012 Calculation of load capacity of shafts and axles - Part 1: General
- DIN CEN/TS 16023:2014-03*DIN SPEC 19524:2014-03 Characterization of waste - Determination of gross calorific value and calculation of net calorific value; German version CEN/TS 16023:2013
- DIN EN 13363-2:2005 Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method; German version EN 13363-2:2005
- DIN 4085 Bb.2:1989 Soil; analysis of earth-pressure; calculation examples
- DIN 51900:2022-06 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value / Note: Date of issue 2022-05-06*Intended as replacement for DIN 51900-1 (2000-04), DIN 51900-1 Berichtigung 1 (20...
- DIN EN 50672:2018-02 Ecodesign requirements for computers and computer servers; German version EN 50672:2017
- DIN 53308:1968 Testing of leather; determination of the contents of total nitrogen and of ammonium salts, calculation of hide substance
- DIN 4085 Beiblatt 1:2018 Subsoil - Calculation of earth-pressure; Supplement 1: Calculation examples
工业和信息化部, Calculation of total hydrocarbons
- YD/T 3754-2020 Overall technical requirements for edge computing based on LTE networks
- YD/T 3962-2021 Overall technical requirements for 5G core network edge computing
- YD/T 3967-2021 Overall technical requirements for IPv4-IPv6 service interoperability based on cloud computing technology
Professional Standard - Environmental Protection, Calculation of total hydrocarbons
- HJ 38-2017 Stationary source emission--Determination of total hydrocarbons, methane and nonmethane hydrocarbons--Gas chromatography
- HJ 604-2017 Ambient air.Determination of total hydrocarbons, methane and nonmethane hydrocarbons.Direct injection/gas chromatography
- HJ 604-2011 Ambient air.Determination of total hydrocarbons.Gas chromatographic method
European Committee for Standardization (CEN), Calculation of total hydrocarbons
- CEN/TS 16023:2013 Characterization of waste - Determination of gross calorific value and calculation of net calorific value
- EN 13363-2:2005 Solar protection devices combined with glazing Calculation of total solar energy transmittance and light transmittance Part 2: Detailed calculation method
- PD CEN/TS 16023:2013 Characterization of waste - Determination of gross calorific value and calculation of net calorific value
- EN ISO 7278-1:1995 Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters - Part 1: General Principles (ISO 7278-1 : 1987)
PL-PKN, Calculation of total hydrocarbons
- PN C04576 ArkusZ14-1973 Water and w?sie water Tes?s for nitrogen Calcula?ion of to?al nitrogen
- PN A86926-1993 Edible vegetable fats. Determination of anisidine value and calculation of total oxidation value Totox
- PN Z04017-03-1990 Air purity protection Tests for aliphatic hydrocarbons containing alkanes and alkenes Determination of the total of aliphatic hydrocarbons C?-i-Cio in ambient air (immission) by gas chromatography
- PN C04062-1986 Petroleum products Determination of gross heat of combustion by bomb calorimeter and calculation of net heat of combustion, of li?uid fuels
Association Francaise de Normalisation, Calculation of total hydrocarbons
- XP X30-479*XP CEN/TS 16023:2013 Characterization of waste - Determination of gross calorific value and calculation of net calorific value
- NF P50-771-2:2005 Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2 : detailed calculation method.
- NF E22-057-1:2012 Mechanical transmissions - Shafts and axles, calculation of load capacity - Part 1 : general.
- NF X50-702:1991 Business computing - Accounting - Specifications for computer-based accounting applications
- NF C90-672*NF EN 50672:2017 Ecodesign requirements for computers and computer servers
- NF EN 50672:2017 Exigences d'écoconception applicables aux ordinateurs et aux serveurs informatiques
- NF P50-737-1*NF EN ISO 10077-1:2017 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1 : general
- NF M03-005:2011 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value.
American National Standards Institute （ANSI), Calculation of total hydrocarbons
Professional Standard - Public Safety Standards, Calculation of total hydrocarbons
- GA/T 2001-2022 Overall Technical Requirements for Mobile Police Trusted Computing
SE-SIS, Calculation of total hydrocarbons
- SIS SS 18 71 72-1984 Biofuels - Determination of gross calorific value by calorimeter and calculation of net calorific value
- SIS SS 424 16 80-1987-1 Telecommunication cables - Cellular-polyolefin-insulated, PVC-sheathed. screened computer cable, type EUEFK
Professional Standard - Chemical Industry, Calculation of total hydrocarbons
- HG/T 3837-2008 Rubber.Determination of total hydrocarbon.Pyrolytic method
International Telecommunication Union (ITU), Calculation of total hydrocarbons
- ITU-R BO.1212-1995 Calculation of Total Interference between Geostationary-Satellite Networks in the Broadcasting-Satellite Service
Professional Standard - Tobacco, Calculation of total hydrocarbons
- YC/T 11.9-1996 General rules for computer-aided design of drawings and design documents of tobacco machinery products
Japanese Industrial Standards Committee (JISC), Calculation of total hydrocarbons
- JIS A 2102-1:2011 Thermal performance of windows and doors -- Calculation of thermal transmittance -- Part 1: General
- JIS A 2102-1:2015 Thermal performance of windows and doors -- Calculation of thermal transmittance -- Part 1: General
RO-ASRO, Calculation of total hydrocarbons
- STAS SR CEI 771-1995 Calculation of maximum overall diameter of cables and specification of minimum tensile strength of suspension strand for low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
- STAS SR ISO 1928:1995 Solid mineral fuels Determination of gross calorific value by the calorimeter bomb method and calculation of net calorific value
- STAS SR 13325-1995 Animal feeding stuffs - Determination of total nitrogen content and calculation of crude protein content
海关总署, Calculation of total hydrocarbons
- SN/T 5262-2020 Determination of each aromatic hydrocarbon content and total aromatic hydrocarbon content in imported mixed aromatic hydrocarbons by two-dimensional gas chromatography
AT-ON, Calculation of total hydrocarbons
- ONORM S 7009-1982 Testing of leather; determination of the contents of total nitrogen and of ammonium salts; calculation of hide substance
TR-TSE, Calculation of total hydrocarbons
- TS 2678-1977 Determination of Gross Calorific Value By The Calorimetric Bomb Method And Calculation of Net Calorific Value
ZA-SANS, Calculation of total hydrocarbons
- SANS 1928:1995 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value
Beijing Provincial Standard of the People's Republic of China, Calculation of total hydrocarbons
- DB11/T 1367-2016 Determination of methane/total hydrocarbons/non-methane total hydrocarbons in exhaust gas from stationary pollution sources Portable hydrogen flame ionization detector method
AENOR, Calculation of total hydrocarbons
- UNE 55513:1981 SURFACE ACTIVE AGENTS. TECHNICAL ALKANE SULFONATES. DETERMINATION OF TOTAL ALKANE SULPHONATE CONTENT
- UNE-EN ISO 10077-1:2010 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General
Danish Standards Foundation, Calculation of total hydrocarbons
- DS/EN 13363-2/AC:2006 Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method
- DS/EN 13363-2:2005 Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method
- DS/EN ISO 10077-1/AC:2010 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General
- DS/EN ISO 10077-1:2006 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General
- DS/INF 418-1:2013 Calculation of heat loss from buildings - Part 1: Calculation of thermal bridges using detailed computer programmes
Lithuanian Standards Office , Calculation of total hydrocarbons
- LST EN 13363-2-2005 Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method
- LST EN 13363-2-2005/AC-2006 Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2: Detailed calculation method
- LST EN ISO 10077-1:2006/AC:2009 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General
Fujian Provincial Standard of the People's Republic of China, Calculation of total hydrocarbons
- DB3502/T 102-2023 Technical Guidelines for Statistical Accounting of Gross Ecosystem Product (GEP)
Society of Automotive Engineers (SAE), Calculation of total hydrocarbons
- SAE J1787-2005 Measurement of the Total Ash Content of Aviation Piston Engine Oils by a Calculation Method
- SAE J1787-2011 Measurement of the Total Ash Content of Aviation Piston Engine Oils by a Calculation Method
Professional Standard - Post and Telecommunication, Calculation of total hydrocarbons
Taiwan Provincial Standard of the People's Republic of China, Calculation of total hydrocarbons
- CNS 10835-1984 Method of Test for Gross Calorific Value of Solid Mineral Fuels by the Calorimeter Bomb Method, and Calculation of Net Calorific Value
European Committee for Electrotechnical Standardization（CENELEC）, Calculation of total hydrocarbons
- EN 50672:2017 Ecodesign requirements for computers and computer servers
ES-UNE, Calculation of total hydrocarbons
- UNE-EN 50672:2017 Ecodesign requirements for computers and computer servers (Endorsed by Asociación Española de Normalización in December of 2017.)
Illuminating Engineering Society of North America, Calculation of total hydrocarbons
- IESNA LM-67-1994 Calculation Procedures and Specification of Criteria for Lighting Calculations
Professional Standard - Energy, Calculation of total hydrocarbons
- NB/SH/T 0885-2014 Determination of total aromatics and total saturates in lube base stocks by high performance liquid chromatography (HPLC) with refractive index detection
HU-MSZT, Calculation of total hydrocarbons
National Aeronautics and Space Administration (NASA), Calculation of total hydrocarbons
- NASA NACA-TR-1098-1952 Summary of methods for calculating dynamic lateral stability and response and for estimating lateral stability derivatives
ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Calculation of total hydrocarbons
- ITU-T Y.3516-2017 Cloud computing – Functional architecture of inter-cloud computing (Study Group 13)