ZH
RU
ES

specific surface as

specific surface as, Total:461 items.

In the international standard classification, specific surface as involves: Manufacturing forming processes, Construction materials, Optics and optical measurements, Linear and angular measurements, Products of the chemical industry, Equipment for the chemical industry, Coals, Textile fibres, Non-metalliferous minerals, Plastics, Products of the textile industry, Raw materials for rubber and plastics, Graphic technology, Equipment for the metallurgical industry, Particle size analysis. Sieving, Waxes, bituminous materials and other petroleum products, Powder metallurgy, Ceramics, Measurement of volume, mass, density, viscosity, Paints and varnishes, Testing of metals, Metalliferous minerals, Mining and quarrying, Nuclear energy engineering, On-board equipment and instruments, Analytical chemistry, Paint ingredients, Data storage devices, Fuels, Mechanical testing, Packaging materials and accessories, Measurement of fluid flow, Non-ferrous metals, Surface treatment and coating, Paint coating processes, Applications of information technology, Air quality, Protection against dangerous goods, Solar energy engineering, Milk and milk products, Road engineering, Road vehicle systems, TESTING, Non-textile floor coverings, Wastes, Tyres, Construction of airports.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, specific surface as

GB/T 6060.1-1997 Roughness comparison specimens. Cast surfaces
GB/T 6060.4-1988 Roughness comparison specimens--Polished surfaces
GB/T 6060.3-1986 Roughness comparison specimens--Spark-erosion machining surfaces
GB/T 207-1963 Method of determination for specific surface of cement
GB/T 6060.5-1988 Roughness comparison specimens--Shot-blasted and grit-blasted surfaces
GB/T 6646.4-1986 Method for specific surface area of chrysotile asbestos
GB/T 6060.2-1985 Roughness comparison specimens--Ground, turned, bored,milled, shaped and planed
GB/T 6060.2-2006 Roughness comparison specimens - Ground, turned, bored, milled, shaped and planed
GB/T 14495-1993 Roughness comparison specimens for wooden pieces
GB/T 3780.5-2002 Carbon black used in rubber products--Determination of specific surface area--CTAB test method
GB/T 8074-1987 Testing method for specific surface of cement--Blaine method
GB/T 8074-2008 Testing method for specific surface of cement.Blaine method
GB/T 8074-2008(英文版) Testing method for specific surface of cement—Blaine method
GB/T 6646.4 COR-1986 Method for specific surface area of chrysotile asbestos COR
GB/T 6369-2008 Surface active agents.Determination of emulsifying power.Colorimetric method
GB/T 6369-1986 Surface active agents--Measurement of emulsifying power--Colorimetric method
GB 6369-1986 Surface active agents－Measurement of emulsifying power－Colorimetric method
GB/T 13390-2008 Metallic powder.Determination of the specific surface area.Method of nitrogen adsorption
GB/T 3780.5-2008 Carbon black. Part 5: Determination of specific surface area. CTAB test method
GB/T 13390-1992 Metallic powder--Determination of the specific surface area--Method of nitrogen adsorption
GB/T 10322.9-2023 Determination of specific surface area of iron ore by Breton gas permeability method
GB/T 11847-2008 Determination of specific surface area of uranium dioxide power by BET capacity method
GB/T 11847-1989 Determination of specific surface area of uranium dioxide powder by multipoint BET method
GB/T 10322.8-2009 Iron ores.Single-point determination of specific surface area.Nitrogen adsorption method
GB/T 19587-2017 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 19587-2004 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 14495-2009 Geometrical Product Specifications(GPS).Surface texture:Profile method.Roughness comparison specimens for wooden pieces
GB/T 2922-1982 Chemical reagents--Determination of specific surface area of solid supports used in chromatography
GB/T 6060.3-2008 Surface roughness comparison specimen.Part 3:Spark-eroded,shot-blasted,gritp-blasted,lapped,filed and polished surface
GB/T 7702.21-1997 Standard test method for granular activated carbon from coal--Determination of specific surface area
GB/T 13288-1991 The assessment of profile grades of steel surface before application of paint and related products.Comparator
GB/T 42303-2023 Guidelines for comparative tests of the performance of surfactant-based detergents for fabric washing
GB/T 14634.6-2002 Test methods of rare earth three-band phosphors for fluorescent lamps-Determination of specific surface area
GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface profil
GB/T 2596-1981 Tungsten powder and tungsten carbide powder--Determination of specific surface product(average graininess)--Simplified nitrogen absorption method
GB/T 7702.20-2008 Test method for granular activated carbon from coal.Determination of pore volume and specific surface area
GB/T 23656-2009 Rubber compounding ingredients.Silica,precipitated,hydrated.Determination of CTAB surface area
GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 3:Method for the calibration of ISO surface profile comparators and for the determination of surface
GB/T 11107-1989 Metallic and its compound powder--Determination of specific surface and particle size by air permeating method
GB/T 24692-2009 Surface active agents.Detergents for domestic machine dishwashing.Guider for comparative testing of performance
GB/T 13288.1-2008 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive blast-c
GB/T 42310-2023 Determination of specific surface area of nanotechnology graphene powder by argon adsorption static capacity method
GB/T 14634.6-2010 Test methods of rare earth three-band phosphors for fluorescent lamps.Part 6:Determination of specific surface area
GB/T 13288.2-2011 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel.Comparator procedure
GB/T 43096-2023 Determination of external specific surface area by powder layer permeability test under steady flow conditions of metal powder
GB/T 20170.2-2006 Test method of physical characters of rare earth metals and compounds.Determination on specific surface area of rare earth compounds
GB/T 6609.35-2023 Methods of chemical analysis and determination of physical properties of alumina Part 35: Determination of specific surface area Nitrogen adsorption method
GB/T 6609.35-2009 Chemical analysis methods and determination of physical performance of alumina-Part 35: Determination of specific surface area by nitrogen adsorption

ZA-SANS, specific surface as

SANS 5748:2006 Specific surface of cement
SANS 5748:2010 Specific surface of cement
SANS 5137:2005 Paints and varnishes - Daylight 45°, 0° luminous directional reflectance of surface coatings and pigments

Korean Agency for Technology and Standards (KATS), specific surface as

KS A 0065-2010 Methods of visual comparison for surface colours
KS A 0065-2015 Methods of visual comparison for surface colours
KS A 0065-1986 Methods of visual comparison for surface colours
KS B 0507-1975 Roughness Comparison Specimens
KS B 0507-1986 Roughness Comparison Specimens
KS M 3817-2002 Methods for comparison of surface roughness of plastics
KS M 3817-1982 Methods for comparison of surface roughness of plastics
KS B 0507-1975(2011) Roughness Comparison Specimens
KS A 0065-2015(2020) Methods of visual comparison for surface colours
KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS M 1429-2013 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS A 0094-2014(2019) Determination of the specific surface area of powders(solids) by gas adsorption method
KS M ISO 4319:2007 Surface active agents－Detergents for washing fabrics－Guide for comparative testing of performance
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS M ISO 4198:2003 Surface active agents-Detergents for hand dishwashing-Guide for comparative testing of performance
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS M ISO 4198-2014(2019) Surface active agents — Detergents for hand dishwashing — Guide for comparative testing of performance
KS M ISO 4198:2014 Surface active agents — Detergents for hand dishwashing — Guide for comparative testing of performance
KS M ISO 8008:2003 Aluminium oxide primarily used for the production of aluminium-Determination of specific surface area by nitrogen adsorption-Single-point method
KS M ISO 4319-2007(2017) Surface active agents－Detergents for washing fabrics－Guide for comparative testing of performance
KS M ISO 4319-2007(2022) Surface active agents－Detergents for washing fabrics－Guide for comparative testing of performance
KS M ISO 7535-2007(2018) Surface active agents－Detergents for domestic machine dishwashing－Guide for comparative testing of performance
KS M ISO 4652-2014(2019) Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption methods — Single-point procedures
KS M ISO 4652:2014 Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption methods — Single-point procedures
KS M ISO 7535:2007 Surface active agents－Detergents for domestic machine dishwashing－Guide for comparative testing of performance
KS F 2496-2012 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS L ISO 18757-2012(2017) Fine ceramics－Determination of specific surface area of ceramic powders by gas adsorption using the BET method
KS L ISO 18757-2012(2022) Fine ceramics－Determination of specific surface area of ceramic powders by gas adsorption using the BET method
KS M ISO 4652-1:2010 Rubber compounding ingredients-Carbon black-Determination of specific surface area by nitrogen adsorption methods-Part 1:Single-point procedures
KS M ISO 4652-1:2014 Rubber compounding ingredients－Carbon black－Determination of specific surface area by nitrogen adsorption methods－Part 1：Single-point procedures
KS M ISO 8503-1-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 1：Specifications and definitions for ISO surf
KS M ISO 8503-1:2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast cleaned steel substrates — Part 1: Specifications and definitions for ISO
KS B ISO 13565-2-2014(2019) Geometrical Product Specifications(GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 2: Height characterization using the linear material ratio curve
KS M ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface profile comparators and for the determination of surface
KS M ISO 8503-4-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface p
KS M ISO 8503-3-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 3：Method for the calibration of ISO surface p
KS M ISO 8503-3:2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast cleaned steel substrates — Part 3: Method for the calibration of ISO surf
KS M ISO 8503-4:2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surf
KS F 2446-2000 Standard test method of test for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
KS F 2446-1980 Standard test method of test for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
KS D ISO 10070:2004 Metallic powders－Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
KS M ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 3：Method for the calibration of ISO surface profile comparators and for the determination of surface
KS M ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 2：Method for the grading of surface profile of abrasive blast-cleaned steel－Comparator procedure
KS M ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 1：Specifications and definitions for ISO surface profile comparators for the assessment of abrasive
KS M ISO 8503-2:2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface prof
KS F 2446-2020 Standard test method for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens
KS M ISO 8503-2-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 2：Method for the grading of surface profile o
KS D ISO 10070-2004(2019) Metallic powders－Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions

CZ-CSN, specific surface as

CSN 72 2114-1970 Determination of specific surface of cement
CSN 44 1818-1987 Iron ore concentrates, Method of determination of specific surface
CSN 25 2302-1980 Surface roughness comparison specimens. echnical requirements
CSN 49 0212-1988 Wood surface roughness comparison specimens of wood. Technical requirements
CSN 72 5042-1973 Testing of fired ceranyc materials. Definition of the specific surface and volume resistivities

Taiwan Provincial Standard of the People's Republic of China, specific surface as

CNS 11352-1985 Method of Comparison for Surface Colour
CNS 10793-1984 Roughness Comparison Specimens
CNS 14389-1999 Methods of measuring for specific surface area of fine ceramic powders by gas adsorption
CNS 12706-1990 Method of Test for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
CNS 14306-1-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Specifications and definitions for ISO surface profile comparators for the assessment of abrasive
CNS 14306.1-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Specifications and definitions for ISO surface profile comparators for the assessment of abrasive
CNS 14306-4-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306.4-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306.3-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306-3-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
CNS 14306.2-1999 Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned steel substrates (Method for the grading of surface profile of abrasive blast-cleaned steel-Comparator procedure
CNS 14306-2-1999 Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned steel substrates (Method for the grading of surface profile of abrasive blast-cleaned steel-Comparator procedure

Japanese Industrial Standards Committee (JISC), specific surface as

JIS Z 8723:1988 Methods of visual comparison for surface colours
JIS B 0659:1996 Roughness comparison specimens
JIS K 7104:1976 Methods for comparison of surface roughness of plastics
JIS Z 8723:2000 Methods for visual comparison of surface colours
JIS Z 8830:1990 Determination of the specific surface area of powders by gas adsorption methods
JIS Z 8830:2013 Determination of the specific surface area of powders (solids) by gas adsorption -- BET method
JIS Z 8830 ERRATUM 1:2002 Determination of the specific surface area of powders (solids) by gas adsorption method (Erratum 1)
JIS B 0671-2:2002 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve

国家市场监督管理总局、中国国家标准化管理委员会, specific surface as

GB/T 6060.1-2018 Surface roughness comparison specimen—Part 1: Casting surface
GB/T 38691-2020 Testing method for specific surface area of petroleum refining catalysts
GB/T 39713-2020 Testing mothed for specific surface area of ceramic powders—BET gas adsorption operation
GB/T 11107-2018 Metallic and its compound powder—Determination of specific surface and particle size—Air permeating method
GB/Z 38062-2019 Nanotechnologies—Determination of specific surface area of graphene materials—Methylene blue adsorption method

RU-GOST R, specific surface as

GOST 10898.5-1984 Ion-exchange resins. Determination of specific surface
GOST 13144-1979 Graphite. Methods for the determination of specific surface
GOST 19616-1974 Weaving and knitted fabrics. A method for evaluating the specific surface resistance
GOST 29104.20-1991 Industrial fabrics. Method for determination of surface specific electric resistance
GOST 8.428-1981 State system for ensuring the uniformity of measurements. Areometers. The values of coefficients of surface tension of liquids
GOST 25699.2-1990 Carbon black for rubber industry. Methods for determination of surface area by CTAB adsorption
GOST 25699.4-1990 Carbon black for rubber industry. Method for determination of specific surface area by inert gas adsorption
GOST 28794-1990 Reagents. Method for the determination of specific surface of chromatographic materials by thermal desorption
GOST 9378-1975 Surface roughness comparison specimens. Technical requirements

AT-ON, specific surface as

ONORM B 2606-1-1997 Surfaces for sports areas -Lawns
ONR CEN/TS 17510-2021 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption
ONORM S 1407-1976 Textile floor coverings; determination of surface pile density and pile fibre volume ratio of pile carpets

Aerospace Industries Association/ANSI Aerospace Standards, specific surface as

AIA/NAS NAS 823-1991 Cast Surface Comparison Standard (Rev. 2)
AIA/NAS NAS823-2011 CAST SURFACE COMPARISON STANDARD Rev 3 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380]

Canadian General Standards Board （CGSB), specific surface as

CGSB 88.20-M88-CAN/CGSB-1988 Echelles Pour Graphiques, Cartes Et Plans

Group Standards of the People's Republic of China, specific surface as

T/ZSA 110-2022 Specific surface area and pore size analyzer
T/YNIA 021-2023 Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method
T/CPCIF 0140-2021 Catalyst carrier— Determination of surface area and pore volume for quasi-thin-water aluminit— Nitrogen adsorption method

International Organization for Standardization (ISO), specific surface as

ISO 23604:2022 Method of determining specific surface area of coal
ISO 2632-3:1979 Roughness comparison specimens — Part 3: Cast surfaces
ISO 9277:2022 Determination of the specific surface area of solids by gas adsorption — BET method
ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption - BET method
ISO 8008:2005 Aluminium oxide primarily used for the production of aluminium - Determination of specific surface area by nitrogen adsorption
ISO 4319:1977 Surface active agents; Detergents for washing fabrics; Guide for comparative testing of performance
ISO 4652:1981 Rubber compounding ingredients; Carbon black; Determination of specific surface area; Nitrogen adsorption methods
ISO 8008:1986 Aluminium oxide primarily used for the production of aluminium; Determination of specific surface area by nitrogen adsorption; Single-point method
ISO 4198:1984 Surface active agents; Detergents for hand dishwashing; Guide for comparative testing of performance
ISO 12800:2003 Nuclear fuel technology - Guide to the measurement of the specific surface area of uranium oxide powders by the BET method
ISO 4652:2020 Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption methods — Single-point procedures
ISO 12800:2017 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
ISO 7535:1984 Surface active agents; Detergents for domestic machine dishwashing; Guide for comparative testing of performance
ISO 2449:1974 Milk and liquid milk products; Density hydrometers for use in products with a surface tension of approximately 45 mN/m
ISO 4652-1:1994 Rubber compounding ingredients - Carbon black - Determination of specific surface area by nitrogen adsorption methods - Part 1: Single-point procedures
ISO 20804:2022 Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
ISO 21283:2018 Iron ores - Determination of specific surface area - Test method using air-permeability apparatus (Blaine)
ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio
ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
ISO 8503-4:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surf
ISO 4652:2012 Rubber compounding ingredients - Carbon black - Determination of specific surface area by nitrogen adsorption methods - Single-point procedures
ISO 8503-3:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 3: method for the calibration of ISO surface profile comparators and for the determination of surf
ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
ISO 13565-2:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
ISO 13565-2:1996/cor 1:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve; Technical Corrigendum 1
ISO 10070:2019 Metallic powders — Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
ISO 8503-2:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 2: method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure
ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
ISO/TR 22770:2019 Preparation of steel substrates before application of paints and related products — Analytical colorimetry method to support visual assessment of surface preparation grades
ISO 18757:2003 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method

British Standards Institution (BSI), specific surface as

BS ISO 23604:2022 Method of determining specific surface area of coal
21/30425566 DC BS ISO 23604. Method of determining specific surface area of coal
BS EN 1370:1997 Founding - Surface roughness inspection by visual tactile comparators
BS ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption. BET method
BS 4359-1:1996 Determination of the specific surface area of powders. BET method of gas adsorption for solids (including porous materials)
BS 4359-2:1982 Determination of the specific surface area of powders - Recommended air permeability methods
BS ISO 8008:2005 Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption
BS EN ISO 12800:2019 Nuclear fuel technology. Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
21/30419294 DC BS ISO 9277. Determination of the specific surface area of solids by gas adsorption. BET method.
BS ISO 9277:2022 Tracked Changes. Determination of the specific surface area of solids by gas adsorption. BET method
BS ISO 4652:2020 Rubber compounding ingredients. Carbon black. Determination of specific surface area by nitrogen adsorption methods. Single-point procedures
BS ISO 21283:2018 Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
BS ISO 20804:2022 Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
BS EN ISO 13565-2:1998 Geometric Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Height characterization using the linear material ration curve
BS EN ISO 13565-2:1997 Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Height characterization using the linear material ration curve
BS EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof
BS 4140-23:1987 Methods of test for aluminium oxide - Determination of specific surface area by nitrogen adsorption (single-point method)
BS ISO 4652:2012 Rubber compounding ingredients. Carbon black. Determination of specific surface area by nitrogen adsorption methods. Single-point procedures
BS EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof
20/30375934 DC BS ISO 4652. Rubber compounding ingredients. Carbon black. Determination of specific surface area by nitrogen adsorption methods. Single-point procedures
21/30372607 DC BS ISO 20804. Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
PD CEN/TS 17510:2020 Materials obtained from end-of-life tyres. Determination of the specific surface area of powders. Method based on krypton adsorption
BS PD CEN/TS 15901-14:2016 Road and airfield surface characteristics. Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCN): ViaFriction (Road Analyser and Recorder of ViaTech AS)
BS EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure
BS EN ISO 18757:2005 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of specific surface area of ceramic powders by gas adsorption using the BET method
BS EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast
BS 2634-2:1987 Roughness comparison specimens. Specification for spark-eroded, shot-blasted, grit-blasted, and polished specimens
BS EN ISO 10070:2019 Metallic powders. Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions
BS 2634-2:2010 Roughness comparison specimens. Part 2: Specification for spark-eroded, shot?blasted, grit-blasted and polished specimens
BS EN ISO 18757:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method
PD ISO/TR 22770:2019 Preparation of steel substrates before application of paints and related products. Analytical colorimetry method to support visual assessment of surface preparation grades

Standard Association of Australia （SAA）, specific surface as

AS 2382:1981 Surface roughness comparison specimens
AS 2360.8.1:2007 Hydrometry - Measurement of free surface flow in closed conduits - Methods
AS/NZS 4266.22/AMD 1:2006 Amendment No.1 to AS/NZS 4266.22.2004 Rrconstituted wood-based panels--Methods of test Part 22: Porosity of laminated surface
AS 4049.3/AMD 1:2006 Amendment No.1 to AS 4049.3-2005 Paints and related--Pavement marking materials Part 3: Waterborne paint--For use with surface applied glass beads
AS 2148:2004 Milk and liquid milk products - Density hyrometers for use in products with a surface tension of approximately 45 mN/m

Professional Standard - Chemical Industry, specific surface as

HG/T 6138-2023 Specific surface area and pore size analyzer
HG/T 2347.8-1992 Determination of specific surface area of γ·Fe(index 2)O(index 3)magnetic powder
HG/T 3073-1999 Rubber compounding ingredients.Silica,precipitated,hydrated.Determination of specific surface area - Nitrogen adsorption method

RO-ASRO, specific surface as

STAS 4223/2-1970 CEMENT Determination of specific surface by means of the flowmeter
STAS 11289-1987 VALUES OF SUPERFICIAL TENSION OF HYDROMETRICAL LIQUIDS
STAS 4223/1-1970 Gement DETERMINATION OF SPECIFIC SURFACE BY MEANS OF AIR PERMEABILITY APPARATUS

YU-JUS, specific surface as

JUS M.A1.043-1982 Roughness camparison specimens — Gast surfaces
JUS H.E8.050-1991 Surface active agents. Determination of wetting power by immersion

NL-NEN, specific surface as

NEN 3636-1980 Surface roughness - Roughness comparison specimens

SE-SIS, specific surface as

SIS SS 13 21 16-1978 Concrete testing — Aggregate — Crushed surface ratio
SIS 83 25 17-1973 Carpets. Determination of surface pile density and pile volume ratio
SIS SS-ISO 8503-4:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast- cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for
SIS SS-ISO 8503-3:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast- cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators
SIS SS-ISO 8503-2:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast- cleaned steel substrates — Part 1: Specifications and definitions for ISO sur- face profile comparators for

TR-TSE, specific surface as

TS 3496-1980 DETERMINATION OF SPECIFIC SURFACE AREA OF POWDERED ORE SAMPLES
TS 2578-1977 Roughness Comparison Specimens PART 1 : Turned, Ground, Bored, Milled, Shaped And Planed

National Metrological Verification Regulations of the People's Republic of China, specific surface as

JJG(建材) 107-1999 Verification regulation for determination specific surface area of air permeability apparatus

Aerospace Industries Association, specific surface as

AIA NAS 823-1991 Cast Surface Comparison Standard (Rev. 2)

AIA/NAS - Aerospace Industries Association of America Inc., specific surface as

NAS823-2011 CAST SURFACE COMPARISON STANDARD (Rev 3)
NAS823-1991 Cast Surface Comparison Standard (Rev 2)

Professional Standard - Aerospace, specific surface as

QJ 1674-1989 Comparison samples of "flow marks" and "pimples" on the surface of aluminum alloy die-casting parts

National Metrological Technical Specifications of the People's Republic of China, specific surface as

JJF 1099-2003 Calibration Specification of Roughness Comparison Specimens
JJF 1099-2018 Calibration Specification for Roughness Comparison Specimens

Professional Standard - Electron, specific surface as

SJ 20842-2002 Test method for Ga/As ratio of surface of gallium arsenide

Professional Standard - Machinery, specific surface as

JB/T 8271-2015 Comparison scale for surface defect of photoconductor of electrostatic copying process

PL-PKN, specific surface as

PN C04422-1968 Inorganic pigment* for paints Determination ol specific area
PN C89652-1987 Porous materials and powders The BET method for the determination of the specific surface area
PN C04404-11-1988 Pigments for paints General methods of test Determination of the specific surface area and texture
PN C04550 ArkusZ04-1974 Water and waste water Tests for synthetic surface active agents and theirs biochemical oxidation Determination of nonionic poly- ethoxylic synthetic surface active agents by colorimetric method with phosphotungstic acid
PN C04550 ArkusZ03-1972 Water and waste waterTests for synthetic surface active agents and theirs biochemical oxidation Determination of nonionic, polyethoxyHc synthetic surface active agents by colorimetric method with ammo- nium cobaltothiocyanate

AENOR, specific surface as

UNE 22164:1994 DETERMINATION OF BET SPECIFIC SURFACE FOR SEPIOLITIC MATERIALS.
UNE 82305-3:1991 ROUGHNESS COMPARISON SPECIMENS. PART 3: CAST SURFACES.
UNE-ISO 9277:2009 Determination of the specific surface area of solids by gas adsorption using the BET method
UNE-EN ISO 13565-2:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO CURVE (ISO 13565-2:1996).
UNE 55800:1985 SURFACE ACTIVE AGENTS. DETERGENTS FOR WASHING FABRICS. GUIDE FOR COMPARATIVE TESTING OF PERFORMANCE
UNE 55829:1986 SURFACE ACTIVE AGENTS. DETERGENTS FOR HAND DISHWASHING. GUIDE FOR COMPARATIVE TESTING OF PERFORMANCE
UNE 55828:1986 SURFACE ACTIVE AGENTS. DETERGENTS FOR DOMESTIC MACHINE DISHWASHING. GUIDE FOR COMPARATIVE TESTING OF PERFORMANCE
UNE-EN 1557:1997 SURFACE ACTIVE AGENTS. COLORIMETRIC CHARACTERIZATION OF OPTICALLY CLEAR COLOURED LIQUIDS (PRODUCTS) AS X, Y, Z TRISTIMULUS VALUES IN TRANSMISSION.
UNE 40242-1:1974 CARPETS. DETERMINATION OF MEASURED SURFACE PILE DENSITY AND MEASURED PILE FIBRE VOLUME RATIO.
UNE 55815:1984 SURFACE ACTIVE AGENTS. ETHANOL TO BE USED AS RAW-MATERIAL IN DETERGENT FORMULATIONS. DETERMINATION OF ALDEHYDES CONTENT. VISUAL COLORIMETRIC METHOD
UNE-EN 933-5:1999/A1:2005 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
UNE-EN 933-5:1999 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 5: DETERMINATION OF PERCENTAGE OF CRUSHED AND BROKEN SURFACES IN COARSE AGGREGATE PARTICLES.
UNE-EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
UNE-EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
UNE-EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
UNE-EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
UNE 55624:1982 SURFACE ACTIVE AGENTS. SODIUM AND POTASSIUM SILICATES TO BE USED AS RAW-MATERIALS IN DETERGENT FORMULATIONS. CALCULATION OF THE RATIO SIO2/NA2O OR SIO2/K2O

Professional Standard - Agriculture, specific surface as

126药典四部-2020 0900 Property inspection method 0991 Specific surface area measurement method
GB 2922-1982 Test method for specific surface area of chromatographic carrier for chemical reagents

Professional Standard - Military and Civilian Products, specific surface as

WJ 2250-1994 Verification Regulations for Activated Carbon Specific Surface Area Meter

American Society for Testing and Materials (ASTM), specific surface as

ASTM D2320-98(2003) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D2320-98 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
ASTM B922-10 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM E3149-18 Standard Guide for Facial Image Comparison Feature List for Morphological Analysis
ASTM D7390-07(2012) Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
ASTM B922-20 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM C1274-00(2006) Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM D7390-07 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
ASTM B922-02(2008) Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM C1274-00 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1274-95 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1274-10 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1274-12 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM B922-22 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM C1274-12(2020) Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1069-09(2022) Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM C1069-86(1997)e1 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM D7390-18 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
ASTM D7390-18e1 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
ASTM D7330-22 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
ASTM D2726-10 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D4567-03 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-99 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-03(2008) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-03(2013) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method

American Gear Manufacturers Association, specific surface as

AGMA 91FTM6-1991 Comparing Surface Failure Modes in Bearings and Gears: Appearances versus Mechanisms

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., specific surface as

SP 112 COMPARATOR-2016 Quality Standard For Evaluation Of Cast Surface Finishes – Visual and Tactile Method – Three Dimensional Cast Surface Comparator

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, specific surface as

GB/T 3780.5-2017 Carbon black—Part5：Determination of specific surface area—CTAB test method
GB/T 23656-2016 Rubber compounding ingredients—Determination of surface area for silica，precipitated，hydrated—CTAB method

Professional Standard - Building Materials, specific surface as

JC/T 995-2006 Zirconia powder with low specific surface area and better sinter ability

IN-BIS, specific surface as

IS 5534-1969
IS 8425-1977
IS 4290 Pt.3-1992 Roughness comparison specimens. Part 3: Cast surfaces (First Revision)
IS 11578-1986

German Institute for Standardization, specific surface as

DIN 6174:1979 Colorimetric Evaluation of Colour Differences of Surface Colours According to the CIELAB Formula
DIN ISO 9277:2014-01 Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
DIN 6176:2001 Colorimetric evaluation of colour differences of surface colours according to DIN99-formula
DIN 66132:1975 Determination of specific surface area of solids by adsorption of nitrogen; single-point diffenrential method according to Haul and Duembgen
DIN 66133:1993 Determination of pore volume distribution and specific surface area of solids by mercury intrusion
DIN 66126:2015-08 Determination of specific surface area of disperse solids by the gas permeability technique - Blaine method
DIN EN ISO 12800:2019-09 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017); German version EN ISO 12800:2019
DIN EN ISO 13565-2:1998 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996); German version EN ISO 13565-2:1997
DIN EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017)
DIN EN ISO 12800:2018 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017); German and English version prEN ISO 12800:2018
DIN EN 1557:1997-03 Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission; German version EN 1557:1996
DIN 66132:1975-07 Determination of specific surface area of solids by adsorption of nitrogen; single-point diffenrential method according to Haul and Dümbgen
DIN 66134:1998 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)
DIN EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
DIN EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
DIN CEN/TS 17510:2020-12 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption; German version CEN/TS 17510:2020
DIN 66134:1998-02 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)
DIN EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
DIN EN ISO 8503-3:2012-06 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of...
DIN EN ISO 8503-4:2012-06 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of...
DIN EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
DIN EN ISO 10070:2020-04 Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019); German version EN ISO 10070:2019
DIN EN ISO 8503-1:2013 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
DIN EN ISO 8503-2:2012-06 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator pro...
DIN EN ISO 8503-1:2013-05 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of a...
DIN EN ISO 18757:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003); English version of DIN EN ISO 18757:2006
DIN CEN/TS 17510:2020 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption; German version CEN/TS 17510:2020
DIN EN ISO 18757:2006-01 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003); German version EN ISO 18757:2005

NZ-SNZ, specific surface as

AS/NZS 4383.2:1996 Preparation of Documents Used in Electrotechnology Part 2: Function-Oriented Diagrams (Replaces NZS/AS 1103.4: 1992, NZS/AS 1103.7: 1984 and NZS/AS 1103.8: 1986)
AS/NZS 4586:2004 Slip Resistance of Classification of New Pedestrian Surface Materials (Supersedes AS/NZS 3661.1: 1993; Amendment 1: 02/14/2005)

Indonesia Standards, specific surface as

SNI 13-6661-2002 Specific surface area measurement for mineral powder by nitrogen gas adsorption
SNI 13-6977-2003 Mineral grain - Determination of specific surface area using test methods of Lea and Nurse permeabilities

European Committee for Standardization (CEN), specific surface as

EN 1370:1996 Founding - Surface Roughness Inspection by Visual Tactile Comparators
EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017)
prEN 725-6-1992 Advanced technical ceramics; methods of test for ceramic powders; part 6: determination of the specific surface area
EN 725-6:1996 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 6: Determination of the Specific Surface Area
EN ISO 13565-2:1997 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties - Part 2: Height Characterization Using the Linear Material Ratio Curve
EN ISO 8503-4:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast -Cleaned Steel Substrates - Part 4: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of
EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
EN ISO 8503-1:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 1: Specifications and Definitions for ISO Surface Profile Comparators for the Assessment of Abr
EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
CEN/TS 15901-14:2016 Road and airfield surface characteristics - Part 14: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCN): ViaFriction (Road Analyser and Recorder of ViaTech AS)
EN ISO 8503-2:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 2: Method for the Grading of Surface Profile of Abrasive Blast-Cleaned Steel - Comparator Proce
EN ISO 8503-3:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 3: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of S
EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
PD CEN/TS 15901-14:2016 Road and airfield surface characteristics - Part 14: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCN): ViaFriction (Road Analyser and Recorder of ViaTech AS)

Association Francaise de Normalisation, specific surface as

NF A04-195:1997 Founding. Surface roughness inspection by visualtactile comparators.
NF E05-051:1981 Surface texture. Measurement devices. Roughness comparison specimens.
NF T73-801:1979 Surface active agents. Detergents for washing fabrics. Guide for comparative testing of performance.
NF X11-620:1996 Determination of the specific surface area of solids by gas adsorption using the bet method.
NF T45-105:2020 Rubber compounding ingredients - Carbon black - Determination of specific surface area by nitrogen adsorption methods - Single-point procedures
E25-032:1986 Fasteners. Coatings (and surface treatments) for protection against corrosion. Comparative presentment.
NF T20-219:1987 Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption. Single-point method.
NF M60-456*NF EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
NF ISO 4652:2020 Ingrédients de mélange du caoutchouc - Noir de carbone - Détermination de la surface spécifique par méthodes par adsorption d'azote - Modes opératoires à un point de mesure
NF E25-032:1986 Éléments de fixation - Revêtements (et traitements de surface) destinés à la protection contre la corrosion - Présentation comparative.
NF EN ISO 18757:2006 Céramiques techniques - Détermination de la surface spécifique (aire massique) des poudres céramiques par adsorption de gaz à l'aide de la méthode BET
T73-803:1985 Surface active agents. Detergents for domestic machine dishwashing. Guide for comparative testing of performance.
T73-802:1985 Surface active agents. Detergents for hand dishwashing. Guide for comparative testing of performance.
NF EN 16074:2019 Peintures et vernis - Détermination de la teneur en matière non volatile et du rendement superficiel spécifique de revêtements pour prélaquage
NF B42-006:1996 Advanced technical ceramics. Methods of test for ceramic powders. Part 6 : determination of the specific surface area.
NF P18-622-5*NF EN 933-5:1998 Tests for geometrical properties of aggregates. Part 5 : determination of percentage of crushed and broken surfaces in coarse aggregate particles.
NF T35-503-4*NF EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4 : method for the calibration of ISO surface profile comparators and for the determination of s
NF T35-503-4:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 4 : method for the calibration of ISO surface profile comparators and for the determination of sur
NF EN 1557:1996 Agents de surface - Caractérisation colorimétrique des liquides (produits) colorés optiquement clairs par composantes trichromatiques X, y et Z en transmittance
NF E05-022:1998 Geometrical Product Specifications (GPS) - Surface texture : profile method - Surfaces having stratified functional properties - Part 2 : height characterization using the linear material ratio curve.
XP T47-769*XP CEN/TS 17510:2020 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorptionX
NF T35-503-3*NF EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3 : method for the calibration of ISO surface profile comparators and for the determination of s
NF T35-503-3:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 3 : method for the calibration of ISO surface profile comparators and for the determination of sur
NF T73-421*NF EN 1557:1996 Surface active agents. Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission.
NF T35-503-2*NF EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2 : method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proce
NF T35-503-2:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 2 : method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedur
NF ISO 23812:2009 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Méthode pour l'étalonnage de la profondeur pour le silicium à l'aide de matériaux de référence à couches delta multiples
NF EN ISO 10070:2019 Poudres métalliques - Détermination de la surface spécifique d'enveloppe à partir de mesures de la perméabilité à l'air d'un lit de poudre dans des conditions d'écoulement permanent
NF T35-503-1:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 1 : specifications and definitions for ISO surface profile comparators for the assessment of abras
XP CEN/TS 17510:2020 Matériaux produits à partir de pneus usagés non réutilisables - Détermination de la surface spécifique des poudrettes - Méthode fondée sur l'adsorption de krypton
XP X30-475*XP CEN/TS 15862:2012 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at a fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
NF A91-490*NF EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using agoniophotometer or an abridged goniophotometer

Association of German Mechanical Engineers, specific surface as

VDI/VDE 2603-1990 Methods of surface measurement; measurement of profile bearing length ratio

未注明发布机构, specific surface as

DIN EN 1370:1997 Surface roughness inspection by visual tactile comparators
DIN EN ISO 8503-3:1995 Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the DIN determination of surface profile using a focusing microscope
BS ISO 8008:2005(2006) Aluminium oxide primarily used for the production of aluminium — Determination of specific surface area by nitrogen adsorption
DIN EN ISO 8503-4:1995 Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the DIN determination of surface profile using a stylus instrument
BS EN ISO 13565-2:1998(1999) Geometric Product Specifications (GPS) — Surface texture : Profile method — Surfaces having stratified functional properties — Part 2 : Height characterization using linear material ratio curve
BS EN 725-6:1996(1999) Advanced technical ceramics — Methods of test for ceramic powders — Part 6 : Determination of the specific surface area
DIN EN 933-5:1998 Tests for geometrical properties of aggregates — Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
NF EN 933-5:2022 Essais pour déterminer les caractéristiques géométriques des granulats - Partie 5 : détermination du pourcentage de surfaces cassées dans les gravillons et graves naturelles

U.S. Air Force, specific surface as

AIR FORCE MIL-I-27202 A NOTICE 1-1996 INDICATOR, ELECTRICAL TACHOMETER, 0-110 PERCENT RPM, INTEGRALLY LIGHTED
AIR FORCE MIL-I-27202 A (1)-1983 INDICATOR, ELECTRICAL TACHOMETER, 0-110 PERCENT RPM, INTEGRALLY LIGHTED
AIR FORCE MIL-I-27202 A-1980 INDICATOR, ELECTRICAL TACHOMETER, 0-110 PERCENT RPM, INTEGRALLY LIGHTED
AIR FORCE MIL-I-25863 D NOTICE 1-1996 INDICATOR, ELECTRICAL TACHOMETER 0-110 PERCENT RPM, 2 INCH SIZE, INTEGRALLY LIGHTED
AIR FORCE MIL-I-25863 D-1990 INDICATOR, ELECTRICAL TACHOMETER 0-110 PERCENT RPM, 2 INCH SIZE, INTEGRALLY LIGHTED

BE-NBN, specific surface as

NBN T 63-303-1980 Surface active agents - Detergents for washing fabrics - Guide for comparative testing of performance
NBN T 63-304-1986 Surface active agents - Detergents for hand dishwashing - Guide for comparative testing of performance
NBN T 63-305-1986 Surface active agents - Detergents for domestic machine dishwashing-Guide for comparative testing of performance

Professional Standard - Energy, specific surface as

NB/SH/T 0571-2021 Determination of Specific Surface Area and Micropore Volume of Zeolite in Catalyst

ES-AENOR, specific surface as

AGMA - American Gear Manufacturers Association, specific surface as

91FTM6-1991 Comparing Surface Failure Modes in Bearings and Gears: Appearances versus Mechanisms

Professional Standard - Non-ferrous Metal, specific surface as

YS/T 438.4-2001 Methods for physical performance determination of sandy alumina.Determination of specific surface area.B.E.T. method
YS/T 438.4-2013 Methods for physical performance determination of sandy alumina.Part 4:B.E.T method for determination of specific surface area

Lithuanian Standards Office , specific surface as

LST ISO 4198:1997 Surface active agents. Detergents for hand dishwashing; Guide for comparative testing of performance
LST ISO 7535:1997 Surface active agents. Detergents for domestic machine dishwashing. Guide for comparative testing of performance
LST EN ISO 13565-2:2001 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996)
LST EN 1557-2002 Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission
LST CEN/TS 17510-2020 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption
LST EN 933-5-2002 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
LST EN 933-5-2002/A1-2005 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
LST EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
LST EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
LST EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
LST EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra

Professional Standard - Petroleum, specific surface as

SY/T 6154-1995 Static Nitrogen Adsorption Capacity Method for Determination of Rock Specific Surface and Pore Size Distribution

国家能源局, specific surface as

SY/T 6154-2019 Static adsorption capacity method for determination of rock specific surface area and pore size distribution
SH/T 0959-2017 Determination of specific surface area of catalytic cracking catalysts Static nitrogen adsorption capacity method

Danish Standards Foundation, specific surface as

DS/EN ISO 13565-2/Corr. 1:2007 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
DS/EN ISO 13565-2:1998 Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve
DS/ISO 7535:2011 Surface active agents - Detergents for domestic machine dishwashing - Guide for comparative testing of performance
DS/EN 1557:1997 Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission
DS/EN 933-5/A1:2005 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
DS/EN 933-5:1998 Tests for geometrical properties of aggregates - Part 5:Determination of percentage of crushed and broken surfaces in coarse aggregate particles
DS/EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced
DS/EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
DS/EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
DS/EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
DS/EN ISO 18757:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method

KR-KS, specific surface as

KS M ISO 7535-2007(2023) Surface active agents－Detergents for domestic machine dishwashing－Guide for comparative testing of performance
KS M ISO 4652-1-2010 Rubber compounding ingredients－Carbon black－Determination of specific surface area by nitrogen adsorption methods－Part 1：Single-point procedures
KS M ISO 8503-1-2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast cleaned steel substrates — Part 1: Specifications and definitions for ISO
KS M ISO 8503-3-2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast cleaned steel substrates — Part 3: Method for the calibration of ISO surf
KS M ISO 8503-4-2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surf
KS M ISO 8503-2-2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface prof

American National Standards Institute （ANSI), specific surface as

ANSI/ASTM E1039:1999 Test Method for Calibration and Characterization of Non-Concentrator Terrestrial Photovoltaic Reference Cells Under Global Irradiation

IT-UNI, specific surface as

UNI 4870-1961
UNI CEN/TS 17510-2021 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption

ES-UNE, specific surface as

UNE-EN ISO 12800:2019 Nuclear fuel technology - Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method (ISO 12800:2017) (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE-CEN/TS 17510:2020 Materials obtained from End-of-Life Tyres - Determination of the specific surface area of powders - Method based on krypton adsorption (Endorsed by Asociación Española de Normalización in December of 2020.)
UNE-EN ISO 10070:2020 Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019)

ESDU - Engineering Sciences Data Unit, specific surface as

TM 58-1974 Comparison of surface pressure fluctuations in a turbulent boundary layer as measured on various flight vehicles

DE-VDA, specific surface as

VDA 280-1-2001 Colorimetry for motor vehicles - Colour measuring of plastic surfaces of interior materials for motor vehicles

Hebei Provincial Standard of the People's Republic of China, specific surface as

DB13/T 2768.4-2018 Graphene powder material detection method part 4: specific surface area, pore volume and pore diameter BET method

工业和信息化部, specific surface as

YS/T 1161.3-2016 Methods for analysis of pseudoboehmite Part 3: Determination of pore volume and specific surface area Nitrogen adsorption method

AASHTO - American Association of State Highway and Transportation Officials, specific surface as

T 166-2005 Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2011 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-1993 Standard Specification for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (Eighteenth Edition)
T 166-2000 Standard Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (Twentieth Edition)

TH-TISI, specific surface as

TIS 1710.1-1998 Rubber compounding ingredients.carbon black.determination of specific surface area by nitrogen adsorption methods.part 1: single-point procedures

The American Road & Transportation Builders Association, specific surface as

AASHTO T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2016 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens

PT-IPQ, specific surface as

E 249-1971

National Aeronautics and Space Administration (NASA), specific surface as

NASA NACA-RM-A51H20 REV A-1951 Comparison of drag, pressure recovery, and surface pressure of a scoop-type inlet and an NACA submerged inlet at transonic speeds