Voltage and specific capacity

Voltage and specific capacity, Total:500 items.

In the international standard classification, Voltage and specific capacity involves: Capacitors, Electrical engineering in general, Power transmission and distribution networks, Thermodynamics and temperature measurements, Conducting materials, Compressors and pneumatic machines, Integrated circuits. Microelectronics, Electronic components in general, Protection against electric shock, Electrical equipment for working in special conditions, Installations in buildings, Metrology and measurement in general, Electricity. Magnetism. Electrical and magnetic measurements, Vacuum technology, Valves, Transformers. Reactors, Milk and milk products, Electrical accessories, Powder metallurgy, Electromagnetic compatibility (EMC), Energy and heat transfer engineering in general, Radiation measurements, Acoustics and acoustic measurements, Electronic display devices, Paints and varnishes, Non-ferrous metals, Semiconductor devices, Insulating fluids, Testing of metals, Piezoelectric and dielectric devices, Solar energy engineering, Nuclear energy engineering, Fluid storage devices, Non-destructive testing, Rectifiers. Convertors. Stabilized power supply, Rotating machinery, Galvanic cells and batteries, Vocabularies, Magnetic materials, Electromechanical components for electronic and telecommunications equipment, Audio, video and audiovisual engineering, Insulation, Equipment for petroleum and natural gas industries, Quality, Electronic tubes, Iron and steel products, Radiocommunications, Optoelectronics. Laser equipment, Coals, Shipbuilding and marine structures in general, Electric traction equipment, Industrial automation systems, Vibrations, shock and vibration measurements, Environmental testing, Electrical and electronic testing, Construction materials, Aerospace electric equipment and systems, Products of non-ferrous metals, Semiconducting materials, Fluid power systems, Protective equipment, Measurement of force, weight and pressure, Test conditions and procedures in general.

CZ-CSN, Voltage and specific capacity

CSN ISO 3968:1994 Hydraulic fluid power.Filters.Evaluation of pressure drop versus flow characteristics
CSN 35 8745-1973 Semiconductor devices. Transistore. Measurement of open-circuit reverse voltage transfer ratio and tinie coefíicient at high frequencies

Korean Agency for Technology and Standards (KATS), Voltage and specific capacity

KS C 0272-1995(2000) ELECTROMAGNETIC COMPATIBILITY-TESTING AND MEASURMENT TECHNIQUES-VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TEST
KS C IEC 61481-1-2021 Live working — Phase comparators — Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
KS C IEC 61481-1-2016(2021) Live working — Phase comparators — Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
KS C CISPR 17-2004 Electromagnetic compatibility(EMC)-Methods of measurement of the suppression characteristics ofpassive radio interference filters and suppression components
KS C 0266-1995 Electromagnetic compatibility-Testing and measurement techniques-Surge immunity test
KS C 0272-1995 Electromagnetic compatibility-Testing and measurement techniques-Voltage dips,short interruptions and voltage variations immunity
KS C 0269-1995 Electromagnetic compatibility-Testing and measurement techniques-Power frequency magnetic field immunity test
KS C IEC TR 62981:2021 Studies and comparisons of magnetic measurements on grain-oriented electrical steelsheet determined by the single sheet test method and Epstein test method
KS C IEC 60655:2014 Values for the difference between free-field and pressure sensitivity levels for one-inch standard condenser microphones
KS C IEC 60655:2007 Values for the difference between free-field and pressure sensitivity levels for one-inch standard condenser microphones
KS C IEC 61000-4-11-2008(2013) Electromagnetic compatibility(EMC)－Part 4-11：Testing and measurement techniques－Voltage dips, short interruptions and voltage variations immunity tests
KS C 9610-4-11-2020 Electromagnetic compatibility(EMC) ― Part 4-11: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests
KS C IEC 61000-4-14:2010 Electromagnetic compatibility(EMC)－Part 4-14：Testing and measurement techniques－Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
KS C IEC 61000-4-11:2008 Electromagnetic compatibility(EMC)－Part 4-11：Testing and measurement techniques－Voltage dips, short interruptions and voltage variations immunity tests
KS C 9610-4-11-2017 Electromagnetic compatibility(EMC) ― Part 4-11: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests
KS C IEC 61000-4-11-2017 Electromagnetic compatibility(EMC)－Part 4-11：Testing and measurement techniques－Voltage dips, short interruptions and voltage variations immunity tests
KS C IEC 60512-25-7-2009(2009) Connectors for electronic equipment－Tests and measurements－Part 25-7：Test 25g：Impedance, reflection coefficient, and voltage standing wave ratio(VSWR)
KS C IEC 61094-5A:2017 Electroacoustics — Measurement microphones — Part 5: Methods for pressure calibration of working standard microphones by comparison
KS C IEC 61094-5A-2022 Electroacoustics — Measurement microphones — Part 5: Methods for pressure calibration of working standard microphones by comparison
KS C 9610-4-8-2017 Electromagnetic compatibility(EMC) — Part 4-8: Testing and measurement techniques — Power frequency magnetic field immunity test
KS C IEC 61000-4-5:2008 Electromagnetic compatibility(EMC)-Part 4-5:Testing and measurement techniques-Surge immunity test
KS C IEC 61000-4-5:2014 Electromagnetic compatibility(EMC) — Part 4-5: Testing and measurement techniques — Surge immunity test
KS C IEC 60512-25-7-2014 Connectors for electronic equipment－Tests and measurements－Part 25-7：Test 25g：Impedance, reflection coefficient, and voltage standing wave ratio(VSWR)
KS C IEC 61000-4-29:2014 Electromagnetic compatibility(EMC) — Part 4-29: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
KS C IEC 61000-4-29-2014(2019) Electromagnetic compatibility(EMC) — Part 4-29: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
KS C IEC TR 61000-2-8-2007(2017) Electromagnetic compatibility(EMC)－Part 2－8：Environment－Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
KS C IEC 61000-4-29-2019 Electromagnetic compatibility(EMC) — Part 4-29: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
KS C IEC TR 61000-2-8-2022 Electromagnetic compatibility(EMC)－Part 2－8：Environment－Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
KS C IEC 61094-5A-2017(2022) Electroacoustics — Measurement microphones — Part 5: Methods for pressure calibration of working standard microphones by comparison
KS C IEC TR 61000-2-8-2007(2022) Electromagnetic compatibility(EMC)－Part 2－8：Environment－Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
KS C IEC 61000-4-34:2014 Electromagnetic compatibility(EMC) — Part 4-34: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
KS C IEC 61000-4-34:2016 Electromagnetic compatibility(EMC) — Part 4-34: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
KS C IEC 61000-4-34-2016(2021) Electromagnetic compatibility(EMC) — Part 4-34: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than
KS C IEC 61000-4-34-2021 Electromagnetic compatibility(EMC) — Part 4-34: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
KS C IEC 61000-2-8:2007 Electromagnetic compatibility(EMC)－Part 2－8：Environment－Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
KS C IEC 61000-4-14-2010(2017) Electromagnetic compatibility(EMC)－Part 4-14：Testing and measurement techniques－Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
KS C IEC 61000-4-14-2022 Electromagnetic compatibility(EMC)－Part 4-14：Testing and measurement techniques－Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

AT-ON, Voltage and specific capacity

ONORM ISO 3968:1983 Hydraulik fluid power; filters; evaluation of pressure drop versus flow characteristics
ONORM E 6023-1990 Low-voltage high-rupturing-capacity fuses up to 660 V; replacement handle
ONORM E 6024-1993 Low-voltage high-rupturing-capacity fuses up to 660 V - LV HRC fuse switch disconnector
ONORM E 6021-1989 Low-voltage high-rupturing-capacity fuses up to 660 V; LV HRC fuse bases
ONORM E 6022-1990 Low-voltage high-rupturing-capacity fuses; three-pole fuse base racks for L. V.H.R.C.-fuses up to 660 V for busbar mounting
OENORM EN ISO 11114-6:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 6: Oxygen pressure surge testing (ISO/DIS 11114-6:2021)

RU-GOST R, Voltage and specific capacity

GOST 28885-1990 Capacitors. Methods of measurements and tests
GOST 23089.4-1983 Integrated circuits. Method of measuring the input currents and input bias current of operational amplifiers and voltage comparators
GOST R 50730.5-1995 Microwave ferrite devices. Methods of measurement of voltage standing wave ratio (VSWR) and maximum VSWR at high power level
GOST 8.255-2003 State system for ensuring the uniformity of measurements. Electrical capacity measures. Verification procedure
GOST 8.255-1977 State system for ensuring the uniformity of measurements. Capasitance measures. Methods and means of calibration
GOST R 54076-2010 Cheese and cheese products. Conductometric method for determination of sodium chloride mass fraction
GOST 23089.14-1988 Integrated microcircuits. Methods for measuring delay time of the switching on/off the voltage comparators
GOST 23089.3-1983 Integrated circuits. Methods of measuring the operational amplifiers and voltage comparators zero offset voltage and emf
GOST 8.013-1972 State system for ensuring the uniformity of measurements. Condenser personnel dosimeters. Verification. Methods and means
GOST 8.153-1975 State system of ensuring the uniformity of measurement. Measuring condenser microphones. Methods and means of verification
GOST 25024.3-1983 Signal produce displays. Measuring methods of current and voltage
GOST 23089.11-1983 Integrated circuits. Methods of measuring the operational amplifiers and voltage comparators input common mode voltage rejection ratio
GOST R 51317.4.11-2007 Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity. Requirements and test methods
GOST R 51317.4.11-1999 Electromagnetic compatibility of technical equipment. Immunity to dynamic changes of power supply voltage. Requirements and test methods
GOST 18604.3-1980 Transistors bipolar. Methods for measuring collector and emitter capacitances
GOST R 51317.3.5-2006 Electromagnetic compatibility of technical equipment. Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A. Limits and test methods
GOST R 51318.14.1-2006 Electromagnetic compatibility of technical equipment. Household appliances, electric tools and similar apparatus. Radio disturbance. Limits and methods of measurements
GOST 30605-1998 Digital voltage and current measuring converters. General specifications
GOST R 51317.3.11-2006 Electromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 75 A and subject to conditional connection. Limits and test methods
GOST 23089.0-1978 Integrated circuits. General requirements at measuring electrical parameters of operational amplifiers and voltage comparators
GOST 23089.1-1983 Integrated circuits. Method of measuring the operational amplifiers and voltage comparators gain
GOST R 51318.16.1.2-2007 Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-2. Radio disturbance and immunity measuring apparatus and methods. Conducted radio disturbance measuring and imm
GOST 30421-1996 Electrical capacitance, pure resistance and dissipation factor high-voltage meters. General specifications
GOST R 53539-2009 Electromagnetic compatibility of technical equipment. Resistibility of telecommunication equipment to ovorvoltages and overcurrents. General technical requirements
GOST R 51318.13-2006 Electromagnetic compatibility of technical equipment. Sound and television broadcast receivers and associated equipment. Radio disturbance. Limits and methods of measurement
GOST R 51318.16.1.1-2007 Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-1. Radio disturbance and immunity measuring apparatus. Measuring apparatus
GOST R 51097-1997 Electromagnetic compatibility of technical equipment. Radiofrequency disturbances from insulator sets and line fittings. Limits and measuring methods
GOST R 51318.11-2006 Electromagnetic compatibility of technical equipment. Industrial, scientific, medical and domestic (ISMD) high-frequency equipment. Radio disturbance. Limits and methods of measurement
GOST R 51317.3.8-1999 Electromagnetic compatibility of technical equipment. Signalling on low-voltage electrical installations. Emission levels, frequency bands and electromagnetic disturbance levels
GOST 21106.5-1977 Oscillator, modulator and regulation tubes; anode dissipated power more than 25 W. Methods of measurement of filament current and voltage
GOST 23089.5-1983 Integrated circuits. Method of measuring the operational amplifiers and voltage comparators consumption current and power
GOST R 51318.16.1.3-2007 Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-3. Radio disturbance and immunity measuring apparatus. Disturbance power measuring apparatus
GOST R 8.562-2007 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the power and voltage of electromagnetic waves
GOST R 8.562-1996 State system for ensuring the uniformity of measurements. State verification schedule for means measuring power of electromagnetic waves within frequency range from 0,03 to 37,50 GHz
GOST R 51317.4.34-2007 Electromagnetic compatibility of technical equipment.Voltage dips, short interruptions and voltage variations immunity for equipment with input current more than 16 A per phase. Requirements and test methods
GOST R 51318.22-2006 Electromagnetic compatibility of technical equipment. Information technology equipment. Man-made radio disturbance. Limits and methods of measurement
GOST R IEC 1007-1996 Transformers and inductors for use in electronic and telecommuncation equipment. Measuring methods and test procedures
GOST R 51525-1999 Electromagnetic compatibility of technical equipment. Immunity of measuring relays and protection equipment to electrostatic discharges. Requirement and test methods
GOST R 51318.16.2.4-2010 Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-4. Methods of measurement of disturbances and immunity. Immunity parameters measurement
GOST R 51522-1999 Electromagnetic compatibilyty of technical equipment. Electrical equipment for measurement, control and laboratory use. Requirements and test methods
GOST 30606-1998 Digital converters for voltage or current measuring. Basic parameters. General technical requirements. Methods of tests
GOST 24613.10-1977 Optoelectronic integrated microcircuits. Method for measuring noise current and noise voltage for low and high levels of logic signal switches
GOST 21106.13-1978 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Methods of measurement of direct interelectrode capacitances
GOST IEC 61000-4-29-2016 Electromagnetic compatibility (EMC). Part 4-29. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
GOST IEC 61000-3-3-2015 Electromagnetic compatibility (EMC). Part 3-3. Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase connected to the power supply network without s
GOST IEC 61000-4-34-2016 Electromagnetic compatibility (EMC). Part 4-34. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
GOST R 8.849-2013 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of electric capacitance and dielectric dissipation for AC high voltage of power frequency
GOST R 51317.3.4-2006 Electromagnetic compatibility of technical equipment. Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A. Limits and test methods
GOST R 51317.3.12-2006 Electromagnetic compatibility of technical equipment. Limitation of harmonic currents produced by equipment with input current greater than 16A and not greater than 75 A per phase connected to public low-voltage supply systems. Limits and test methods
GOST 29073-1991 Electromagnetic compatibility for industrial process measurement and control equipment. Immunity to electromagnetic disturbance. General introduction
GOST 30318-1995 Electromagnetic compatibility of technical means. Frequency bandwidth and off-band emission requirements of radiotransmitters. Test and control methods
GOST R 8.746-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the ratio error and phase displacement of a.c. power frequency voltage in the range from 0,1/V3 do 750/V3 kB
GOST R 50638-1994 Electromagnetic compatibility of technical equipment. Semicondactor microvawe oscillator devices and modules. List of EMC parameters and requirements for them. Methods of measurement
GOST R 51516-1999 Electromagnetic compatibility of technical equipment. Immunity of measuring relays and protection equipment to fast transient disturbance. Requirement and test methods
GOST R 50657-1994 Electromagnetic compatibility of radioelectronic equipment. Radio transmitting devices of all types and purposes for national economic use. Limits for frequency tolerances. Measuring and monitoring methods
GOST R 50842-1995 Electromagnetic compatibiliti of radioelectronic equipment. Radio transmitting devices for national economics application. Limits for spurious emissions. Measurings and monitoring methods
GOST 8.240-1977 State system for ensuring the uniformity of measurements. Measuring transducers for pressure differences with unified current output signals of the SSI. Methods and means of verification
GOST IEC 61000-4-14-2016 Electromagnetic compatibility (EMC). Part 4-14. Testing and measurement techniques. Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

SE-SIS, Voltage and specific capacity

SIS SEN 21 18 11-1968 Tolerances on nominal voltage in distribution networks
SIS SS IEC 655:1986 Acoustics — Values for the difference between free-field and pressure sensitivity levels for one-inch standard condenser microphones

British Standards Institution (BSI), Voltage and specific capacity

BS EN 61481-1:2014(2015) Live working — Phase comparators Part 1 : Capacitive type to be used for voltages exceeding 1 kV A.C.
BS EN 61788-4:2016 Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
BS EN 61481-1:2014 Live working. Phase comparators. Capacitive type to be used for voltages exceeding 1 kV a.c
BS EN 60358-2:2013 Coupling capacitors and capacitor dividers. AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application
PD IEC/TR 61000-3-7:2008 Electromagnetic compatability (EMC). Limits. Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
PD IEC/TR 61000-3-6:2008 Electromagnetic compatibility (EMC). Limits. Assessment of emission limits for the connection of distorting installations to MV, HV and EHV power systems
BS ISO 21172-1:2015 Gas cylinders. Welded steel pressure drums up to 3 000 litres capacity for the transport of gases. Design and construction. Capacities up to 1 000 litres
PD IEC/TR 61000-3-13:2008 Electromagnetic compatibility (EMC). Limits. Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems
BS EN 61000-4-14:1999 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage fluctuation immunity test
BS EN 61094-5:2016 Electroacoustics. Measurement microphones. Methods for pressure calibration of working standard microphones by comparison
BS EN 61000-4-11:2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
BS EN ISO 11114-6:2022 Gas cylinders. Compatibility of cylinder and valve materials with gas contents - Oxygen pressure surge testing
BS EN 61000-4-11:2004+A1:2017 Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
BS EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
PD IEC/TR 61000-3-14:2011 Electromagnetic compatibility (EMC). Assessment of emission limits for harmonics, interharmonics, voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems
BS EN 50361:2001 Basic standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones (300 MHz - 3 GHz)
PD IEC/TR 61000-2-8:2002 Electromagnetic compatibility (EMC). Environment. Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
BS EN 61000-4-11:1994 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
18/30381090 DC BS EN 61000-4-11. Electromagnetic compatibility (EMC). Part 4-11. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
BS ISO 20816-5:2018 Mechanical vibration. Measurement and evaluation of machine vibration. Machine sets in hydraulic power generating and pump-storage plants
BS EN ISO 16526-3:2020 Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Spectrometric method
BS ISO 20146:2019 Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
BS EN 61000-4-34:2007+A1:2009 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
BS EN 61000-4-34:2007 Electromagnetic compatability (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16A per phase
21/30420641 DC BS EN ISO 24676. Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 6. Oxygen pressure surge testing
BS EN 61000-4-14:1999+A2:2009 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
BS EN 134104:1991 Specification for harmonized system of quality assessment for electronic components - Blank detail specification: compression type trimmer capacitors (qualification approval)
BS EN 134104:1995 Specification for harmonized system of quality assessment for electronic components - Blank detail specification: compression type trimmer capacitors (qualification approval)
BS IEC TR 63401-1:2022 Dynamic characteristics of inverter-based resources in bulk power systems - Interconnecting inverter-based resources to low short circuit ratio AC networks
BS EN 61000-3-12:2011 Electromagnetic compatibility (EMC). Limits. Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and 75 A per phase
BS EN 61000-3-12:2006 Electromagnetic compatibility (EMC). Limits. Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current 16A and 75A per phase
BS EN 61000-3-12:2005 Electromagnetic compatibility (EMC) - Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16A and 75A per phase

Group Standards of the People's Republic of China, Voltage and specific capacity

T/CSEE 0032-2017 Relative dielectric loss factor and capacitance ratio live test method of capacitive equipment
T/GVS 005-2022 Testing specification for contrast method of absolute pressure capacitance diaphragm vacuum gauge in the semiconductor equipment
T/CEC 135-2017 Guidelines for the Measurement and Verification of Power Savings in Waste Heat and Pressure Power Generation Projects
T/CEC 506-2021 Design specification for large-capacity dry-type high-frequency transformers for power electronic equipment
T/CPSS 1008-2021 Method for comprehensive assessment of energy efficiency and power quality in low voltage DC distribution system
T/SSEA 0218-2022 Quality classification and "Linpaozhe" evaluation requirements for angle steel for UHV transmission towers

Professional Standard - Electricity, Voltage and specific capacity

DL/T 2603-2023 Live test method for relative dielectric loss factor and capacitance ratio of capacitive equipment
DL/T 2000-2019 1000kV AC Transformer Body and Regulating Compensation Transformer Combined Partial Discharge Field Measurement Guidelines
DL/T 294.4-2019 Technical Specifications for Generator De-excitation and Rotor Overvoltage Protection Device Part 4 Calculation of De-excitation Capacity

CN-STDBOOK, Voltage and specific capacity

图书 3-9846 Understanding and Implementation of GB/T 35710-2017 "Guidelines for Capacity Evaluation of Power Transformers with Voltage Levels 35kV and Below"

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Voltage and specific capacity

GB/T 7777-2003 Measurement and evaluation of mechanical vibration of displacement compressors
GB/T 30137-2013 Power quality.Voltage dips and short interruptions
GB/T 23365-2023 Lithium cobalt oxide electrochemical performance test first discharge specific capacity and first charge and discharge efficiency test method
GB/T 23365-2009 Electrochemical performance test of lithium cobalt oxide.Test method for specific capacity and charge.discharge efficiency of the first cycle
GB/T 23366-2009 Electrochemical performance test of lithium cobalt oxide.Test method for discharge plateau capacity ratio and cycle life
GB/T 11068-2006 Gallium arsenide epitaxial layer.Determination of carrier concentration voltage-capacitance method
GB 11068-1989 GaAs Epitaxial Layer Carrier Concentration Capacitance-Voltage Measurement Method
GB/T 42161-2022 Electrochemical performance test of lithium iron phosphate—Test method for the initial discharge specific capacity and the initial efficiency
GB/T 43093-2023 Lithium nickel manganese oxide electrochemical performance test first discharge specific capacity and first charge and discharge efficiency test method
GB/T 17626.14-2005 Electromagnetic compatibility Testing and measurement techniques Voltage fluctuation immunity test
GB/T 17626.11-1999 Electromagnetic compatibility. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
GB/T 17626.11-2008 Electromagnetic compatibility.Testing and measurement techniques.Voltage dips, short interruptions and voltage variations immunity tests
GB/T 30842-2014 Electromagnetic shielding effectiveness specification and measuring method for high voltage testing enclosures
GB/T 17626.27-2006 Electromagnetic compatibility Testing and measurement techniques Unbalance immunity test
GB/T 17626.29-2006 Electromagnetic compatibility Testing and measurement techniques Voltage dips， short interruptions and voltage variations on d.c.input power port immunity tests
GB/Z 18039.7-2011 Electromagnetic compatibility.Environment.Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
GB/T 17626.34-2012 Electromagnetic compatibility.Testing and measurement techniques.Voltage dips,short interruptions and voltage variations immunity tests for equipment with mains current more than 16A per phase
GB/T 17626.11-2023 Electromagnetic Compatibility Testing and Measurement Techniques Part 11: Voltage Dips, Short Interruptions and Voltage Variation Immunity Tests for Equipment with Input Current Less than or Equal to 16 A per Phase

国家市场监督管理总局、中国国家标准化管理委员会, Voltage and specific capacity

GB/T 7777-2021 Measurement and evaluation of mechanical vibration of displacement compressors
GB/T 39864-2021 Electrochemical performance test of lithium manganese oxide—Test method for the initial specific discharge capacity and the initial efficiency
GB/T 39861-2021 Electrochemical performance test of lithium manganese oxide—Test method for discharge plateau capacity ratio and cycle life
GB/T 19749.2-2022 Coupling capacitors and capacitor dividers—Part 2: DC or AC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application
GB/T 37201-2018 Electrochemical performance test of lithium nickel cobalt manganese oxide —Test method for discharge specific capacity and charge-discharge coulombic efficiency of the first cycle
GB/T 37207-2018 Electrochemical performance test of lithium nickel cobalt manganese oxide— Test method for discharge plateau capacity ratio and cycle life
GB/T 5095.2507-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)

International Electrotechnical Commission (IEC), Voltage and specific capacity

IEC White Paper RE-EES:2012 Grid integration of large-capacity Renewable Energy sources and use of large-capacity Electrical Energy Storage
IEC 61481-1:2014 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
IEC 61481-1:2014/COR1:2015 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
IEC 60588-5:1979 Askarels for transformers and capacitors. Part 5: Screening test for compatibility of materials and transformer askarels
IEC TR 61088:1991 Characteristics and measurements of ultrasonic piezoceramic transducers
IEC 61501:1998 Nuclear reactor instrumentation - Wide range neutron fluence rate meter - Mean square voltage method
IEC 60358-2:2013 Coupling capacitors and capacitor dividers - Part 2: AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application
IEC TR 63401-1:2022 Dynamic characteristics of inverter-based resources in bulk power systems - Part 1: Interconnecting inverter-based resources to low short circuit ratio AC networks
IEC 61000-4-11:2001 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measuring techniques; Voltage dips, short interruptions and voltage variations immunity tests
IEC 60655:1979 Values for the difference between free-field and pressure sensitivity levels for one-inch standard condenser microphones
IEC 61000-4-14:2002 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques; Voltage fluctuation immunity test
IEC 61000-4-11:2017 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
IEC 61000-4-11:2004 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
IEC 61000-4-14:1999 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test
IEC 61000-4-14:1999+AMD1:2001 CSV Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test
IEC TR 61000-3-14:2011 Electromagnetic compatibility (EMC) - Part 3-14: Assessment of emission limits for harmonics, interharmonics, voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems
IEC 60512-25-7:2004 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)
IEC 61000-4-11:1994 Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 11: Voltage dips, short interruptions and voltage variations immunity tests
IEC 61000-4-33:2005 Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters
IEC 61000-4-11/AMD1:2000 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations immunity tests; Amendment 1
IEC 61000-4-11:2004/ISH1:2010 Interpretation Sheet 1 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
IEC 61000-4-11:2004/AMD1:2017 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests; Amendment 1
IEC 61000-4-14:1999/AMD1:2001 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques; Voltage fluctuation immunity test; Amendment 1
IEC 61000-4-34:2005+AMD1:2009 CSV Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than
IEC 61000-4-29:2000 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
IEC 61000-4-34:2009 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
IEC 61000-2-8:2002 Electromagnetic compatibility (EMC) - Part 2-8: Environment; Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
IEC 61000-3-12:2004 Electromagnetic compatibility (EMC) - Part 3-12: Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current 16 A and 75 A per phase
IEC 61000-4-7:2009 Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
IEC 61000-4-34:2005/AMD1:2009 Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipmentwith mains curr
IEC 61000-4-34:2005 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
IEC 61000-4-11:2020 RLV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16
IEC 61000-3-12:2011 Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current 16 A and 75 A per phase
IEC 61000-3-12:2011+AMD1:2021 CSV Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase
IEC TR 61000-2-8:2002 Electromagnetic compatibility (EMC) - Part 2-8: Environment; Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
IEC 61000-4-11:2020/COR1:2020 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16
IEC 61000-4-11:2020 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16
IEC 61000-4-14:1999+AMD1:2001+AMD2:2009 CSV Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

Professional Standard - Machinery, Voltage and specific capacity

JB/T 56211-1999 Product quality classification of coupling capacitors and capacitor voltage regulators

United States Navy, Voltage and specific capacity

NAVY MIL-E-7016 F (1)-1981 ELECTRIC LOAD AND POWER SOURCE CAPACITY, AIRCRAFT, ANALYSIS OF
NAVY MIL-E-7016 F-1976 ELECTRIC LOAD AND POWER SOURCE CAPACITY, AIRCRAFT, ANALYSIS OF
NAVY MIL-E-7016 F VALID NOTICE 1-1988 ELECTRIC LOAD AND POWER SOURCE CAPACITY, AIRCRAFT, ANALYSIS OF [Use In Lieu Of: NAVY MIL-E-007016 E]

Association Francaise de Normalisation, Voltage and specific capacity

NF EN 61481-1:2015 Travaux sous tension - Comparateurs de phase - Partie 1 : type capacitif pour usage sur des tensions alternatives de plus de 1 kV
NF C31-888-4*NF EN 61788-4:2016 Superconductivity - Part 4 : residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
NF C18-481-1*NF EN 61481-1:2015 Live working - Phase comparators - Part 1 : capacitive type to be used for voltages exceeding 1 kv a.c.
NF E51-260/A1*NF ISO 1217/A1:2016 Displacement compressors - Acceptances tests - Amendment 1 : calculation of isentropic efficiency and relationship with specific energy
NF EN IEC 60076-22-8:2021 Transformateurs de puissance - Partie 22-8 : accessoires pour transformateurs de puissance et bobines d'inductance - Dispositifs compatibles avec les réseaux de communication
NF E48-352*NF ISO 3662:1989 Hydraulic fluid power. Pumps and motors. Geometric displacements.
NF ISO 1217/A1:2016 Compresseurs volumétriques - Essais de réception - Amendement 1 : calcul de du rendement isenthropique et relation avec l'énergie spécifique
NF C54-110-2*NF EN 60358-2:2014 Coupling capacitor and capacitor dividers - Part 2 : AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application
NF C86-902:1986 Harmonized system of quality assessment for electronic components. Integrated voltage comparators. Blank detail specification CECC 90 302.
NF C93-629-4*NF EN 60368-4:2001 Piezoelectric filters of assessed quality - Part 4 : sectional specification - Capability approval
NF C91-004-14/A2*NF EN 61000-4-14/A2:2009 Electromagnetic compatibility (EMC) - Part 4-14 : testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
NF C91-004-11:1995 Electromagnetic compatibility (emc). Part 4 : testing and measurement techniques. Section 11 : voltage dips, short interruptions and voltage variations immunity tests.
NF EN 60444-2:2001 Mesure des paramètres des quartz piézoélectriques par la technique de phase nulle dans le circuit en pi - Partie 2 : méthode de décalage de phase pour la mesure de la capacité dynamique des quartz
NF C93-629-4-1*NF EN 60368-4-1:2001 Piezoelectric filters of assessed quality - Part 4-1 : blank detail specification - Capability approval
NF C91-004-11*NF EN 61000-4-11:2004 Electromagnetic compatibility (EMC) - Part 4-11 : testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
NF EN ISO 11114-6:2022 Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux - Partie 6 : essai de compression adiabatique à l'oxygène
NF C91-004-29*NF EN 61000-4-29:2001 Electromagnetic compatibilty (EMC) - Part 4-29 : testing and measurement techniques - Voltages dips, short interruptions and voltage variations on d.c. in put power port immunity tests
NF C46-020:1986 ELECTROMAGNETIC COMPATIBILITY MAINLY FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT. GENERAL INTRODUCTION.
NF C91-004-14/A1*NF EN 61000-4-14/A1:2004 Electromagnetic compatibility (EMC) - Part 4-14 : testing and measurement techniques - Voltage fluctuation immunity test
NF C91-004-14*NF EN 61000-4-14:1999 Electromagnetic compatibility (EMC) - Part 4-14 : testing and measurement techniques - Voltage fluctuation immunity test
NF EN 61000-4-14/A1:2004 Compatibilité électromagnétique (CEM) - Partie 4-14 : techniques d'essai et de mesure - Essai d'immunité aux fluctuations de tension
NF EN 61000-4-14:1999 Compatibilité électromagnétique (CEM) - Partie 4-14 : techniques d'essai et de mesure - essai d'immunité aux fluctuations de tension
NF C93-400-25-7*NF EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Part 25-7 : test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR).
NF EN 60512-25-7:2005 Connecteurs pour équipements électroniques - Essais et mesures - Partie 25-7 : essais 25g : impédance, coefficient de réflexion et rapport d'ondes stationnaires en tension (VSWR)
NF C46-023:1988 ELECTROMAGNETIC COMPATIBILITY MAINLY FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT. ELECTRICAL FAST TRANSIENTS BURST REQUIREMENTS.
NF EN 61000-4-29:2001 Compatibilité électromagnétique (CEM) - Partie 4-29 : techniques d'essai et de mesure - Essais d'immunité aux creux de tension, coupures brèves et variations de tension sur les accès d'alimentation en courant continu
NF C93-367*NF EN 61248-7:1998 Transformers and inductors for use in electronic and telecommunication equipment. Part 7 : sectional specification for high-frequency transformers on the basis of the capability approval procedure.
NF EN 61280-2-4:1998 Procédures d'essai de base des sous-systèmes de télécommunications à fibres optiques - Partie 2-4 : procédures d'essai des systèmes numériques - Mesure de la tolérance sur le débit binaire.
NF C93-363*NF EN 61248-3:1998 Transformers and inductors for use in electronic and telecommunication equipment. Part 3 : sectional specification for power transformers on the basis of the capability approval procedure.
NF C93-365*NF EN 61248-5:1998 Transformers and inductors for use in electronic and telecommunication equipment. Part 5 : sectional specification for pulse transformers on the basis of the capability approval procedure.
NF C46-022:1986 ELECTROMAGNETIC COMPATIBILITY MAINLY FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT. RADIATED ELECTROMAGNETIC FIELD REQUIREMENTS.
NF EN 61094-5:2016 Électroacoustique - Microphones de mesure - Partie 5 : méthodes pour l'étalonnage en pression par comparaison des microphones étalons de travail
NF C91-004-34/A1*NF EN 61000-4-34/A1:2009 Electromagnetic compatibility (EMC) - Part 4-34 : testing and measuring techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase.
NF C91-004-34*NF EN 61000-4-34:2007 Electromagnetic compatibility (EMC) - Part 4-34 : testing and measuring techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
NF C97-335*NF EN 61094-5:2016 Electroacoustics - Measurement microphones - Part 5 : methods for pressure calibration of working standard microphones by comparison
NF EN 61000-4-34/A1:2009 Compatibilité électromagnétique (CEM) - Partie 4-34 : techniques d'essai et de mesure - Essais d'immunité aux creux de tension, coupures brèves et variations de tension pour matériel ayant un courant d'alimentation de plus de 16 A par phase
NF E48-353:1985 Hydraulic fluid power. Positive displacement pumps and motors. Identification code and dimensions for mounting flanges and shaft ends.
NF L54-002-160*NF EN 2591-704:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 704 : electrical elements - Measurement of turns ratio on a transformer used in a coupler
NF C91-004-11*NF EN IEC 61000-4-11:2020 Electromagnetic compatibility (EMC) - Part 4-11 : testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
NF EN 61000-4-34:2007 Compatibilité électromagnétique (CEM) - Partie 4-34 : techniques d'essai et de mesure - Essais d'immunité aux creux de tension, coupures brèves et variations de tension pour matériel ayant un courant appelé de plus de 16 A par phase
NF EN IEC 61000-4-11:2020 Compatibilité électromagnétique (CEM) - Partie 4-11 : techniques d'essai et de mesure - Essais d'immunité aux creux de tension, coupures brèves et variations de tension pour les appareils à courant d'entrée inférieur ou égal à 16 A par phase
NF EN 2591-704:2002 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 704 : organes électriques - Mesure du rapport des spires sur un transformateur utilisé dans un coupleur
NF C93-366*NF EN 61248-6:1998 Transformers and inductors for use in electronic and telecommunication equipment. Part 6 : sectional specification for inductors on the basis of the capability approval procedure.

Professional Standard - Recommended Standards for Engineering Construction, Voltage and specific capacity

CECS 33-1991 THE SELECTION STANDARD FOR SERIES OF VOLTAGE AND CAPACITY OF SHUNT CAPACITOR

JSAE - Society of Automotive Engineers of Japan@ Inc., Voltage and specific capacity

JASO D609-2001 Automotive Parts - Current Capacity of Low Tension Cables
JASO D609-2017 Automotive Parts - Current Capacity of Low Tension Cables

国家能源局, Voltage and specific capacity

NB/T 41001-2011 Capacitive voltage transformer product quality classification
NB/T 41003-2011 Product quality classification of self-healing shunt capacitors for AC power systems with nominal voltage 1000V and below

Association of German Mechanical Engineers, Voltage and specific capacity

VDI 2045 Blatt 1-1993 Acceptance and performance tests on turbo compressors and displacement compressors; test procedure and comparison with guaranteed values

Defense Logistics Agency, Voltage and specific capacity

DLA DSCC-DWG-85019 REV E-2008 DELAY LINES, PROGRAMMABLE 16 PIN COMPATIBLE, 3 BIT, TTL COMPATIBLE
DLA SMD-5962-89562 REV F-2004 MICROCIRCUIT, LINEAR, SWITCHED CAPACITOR VOLTAGE CONVERTER WITH REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-95768 REV B-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, 4-BIT MAGNITUDE COMPARATOR, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON
DLA SMD-5962-97533 REV C-2003 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, QUADRUPLE 2-INPUT POSITIVE NAND GATE, MONOLITHIC SILICON
DLA SMD-5962-97534 REV B-2001 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, QUADRUPLE 2-INPUT POSITIVE-AND GATE, MONOLITHIC SILICON
DLA SMD-5962-92234-1993 MICROCIRCUIT, DIGITAL, FAST CMOS 8-BIT IDENTITY COMPARATOR WITH CHIP ENABLE, TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON
DLA SMD-5962-88757 REV B-2006 MICROCIRCUIT, DIGITAL, HIGH-SPEED CMOS, PHASE-LOCKED-LOOP WITH VOLTAGE CONTROLLED OSCILLATOR, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON

Professional Standard - Electron, Voltage and specific capacity

SJ/T 31492-1995 Comparable unit output energy consumption quota for capacitor manufacturing products
SJ/T 9503.12-1991 Class 1 high-voltage ceramic dielectric capacitors--Quality grading standard
SJ/T 9503.14-1991 Class 2 high-voltage ceramic dielectric capacitors--Quality grading standard
SJ/T 10557.2-1994 Methods of crystal grain structure measurement for aluminum foil for high voltage electrolytic capacitors
SJ/T 31490-1995 Comparable unit output energy consumption quota for piezoelectric quartz crystal manufacturing products

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Voltage and specific capacity

GB/T 35710-2017 Rated power evaluation guide for 35kV and below power transformers
GB/T 20441.5-2017 Electroacoustics—Measurement microphones—Part 5: Methods for pressure calibration of working standard microphones by comparison
GB/T 35711-2017 Analysis, restrain and measurement of harmonics of DC side of high voltage direct current (HVDC) transimission system

European Committee for Electrotechnical Standardization（CENELEC）, Voltage and specific capacity

EN 61481-1:2014 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
EN 61000-4-11:2004 Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
EN 61000-4-34:2007 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
EN 60512-25-7:2005 Connectors for electronic equipment Tests and measurements Part 25-7: Test 25g Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
EN 61000-4-29:2000 Electromagnetic Compatibility (EMC) Part 4-29: Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations on D.C. Input Power Port Immunity Tests
EN 61000-4-34:2007/A1:2009 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

AENOR, Voltage and specific capacity

UNE-EN 61481-1:2015 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
UNE-EN 61000-4-11:2005/A1:2017 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
UNE-EN 61000-4-11:2005 Electromagnetic compatibility (EMC) -- Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
UNE-EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements -- Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
UNE-EN 61000-4-29:2002 Electromagnetic compatibility (EMC) -- Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests.
UNE-EN 61000-4-14:2001/A2:2010 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phaseCompatibilité électromagnétique (CEM) - Partie 4-14: Techniques d'essai et
UNE-EN 61000-4-34:2008/A1:2010 Electromagnetic compatibility (EMC) -- Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
UNE-EN 61000-4-7:2004 Electromagnetic compatibility (EMC) -- Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
UNE-EN 61000-4-7:2004/A1:2010 Electromagnetic compatibility (EMC) -- Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
UNE-EN 61000-4-34:2008 Electromagnetic compatibility (EMC) -- Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (IEC 61000-4-34:2005).
UNE-EN 61000-4-14:2001/A1:2005 Electromagnetic compatibility (EMC) -- Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16A per phase.
UNE-EN 61000-4-14:2001 Electromagnetic compatibility (EMC) -- Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16A per phase.

Japanese Industrial Standards Committee (JISC), Voltage and specific capacity

JIS B 8656:2002 Test methods for electro-hydraulic proportional bypass flow control valves
JIS B 8654:2002 Test methods for electro-hydraulic proportional series flow control valves
JIS B 8657:2002 Test methods for electro-hydraulic proportional directional bypass flow control valves
JIS B 8655:2002 Test methods for electro-hydraulic proportional directional series flow control valves
JIS C 61000-4-11:2008 Electromagnetic compatibility (EMC) -- Part 4-11: Testing and measuring techniques -- Voltage dips, short interruptions and voltage variations immunity tests
JIS C 61000-4-14:2004 Electromagnetic compatibility (EMC) -- Part 4-14: Testing and measurement techniques -- Voltage fluctuation immunity test
JIS C 1000-4-11:2003 Electromagnetic compatibility (EMC) -- Part 4: Testing and measuring techniques -- Section 11: Voltage dips, short interruptions and voltage variations immunity tests
JIS C 61000-4-11:2003 Electromagnetic compatibility (EMC) -- Part 4: Testing and measuring techniques -- Section 11: Voltage dips, short interruptions and voltage variations immunity tests
JIS C 61000-4-34:2008 Electromagnetic compatibility (EMC) -- Part 4-34: Testing and measurement techniques -- Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16A per phase
JIS C 61000-4-34:2017 Electromagnetic compatibility (EMC) -- Part 4-34: Testing and measurement techniques -- Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
JIS C 61000-4-11:2021 Electromagnetic compatibility (EMC) -- Part 4-11: Testing and measuring techniques -- Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase

German Institute for Standardization, Voltage and specific capacity

DIN 43620-1:1984 Low-voltage high-rupturing-capacity fuses with blade contacts; LV HRC fuse links for 500 and 660 V a.c. and 440 V d.c.
DIN 43620-3:1984 Low-voltage high-rupturing-capacity fuses with blade contacts; LV HRC fuse bases for LV HRC fuse links for 500 and 660 V a.c. and 440 V d.c.
DIN EN IEC 61788-4:2021 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (IEC 61788-4:2020); German version EN IEC 61788-4:2020
DIN EN 61788-4:2017 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (IEC 61788-4:2016); German version EN 61788-4:2016
DIN 40771-1:1981 Nickel-cadmium-accumulators; cells with pocket-type plates, cells in steel and plastic containers; rated capacities, main dimensions
DIN 45940-1302:1987 Harmonized system of quality assessement for electronic components; blank detail specification: integrated voltage comparators
DIN IEC 60483:1988-04 Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling; identical with IEC 60483, edition 1976
DIN EN 61481-1:2015 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. (IEC 61481-1:2014); German version EN 61481-1:2014
DIN EN 61000-4-11:2005 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11:2004); German version EN 61000-4-11:2004
DIN EN 60358-2:2014 Coupling capacitors and capacitor dividers - Part 2: AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application (IEC 60358-2:2013); German version EN 60358-2:2013
DIN EN ISO 11114-6:2022-12 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 6: Oxygen pressure surge testing (ISO 11114-6:2022); German version EN ISO 11114-6:2022
DIN EN 61094-5:2016-12 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2016); German version EN 61094-5:2016
DIN 43534:1983 Lead storage batteries; maintenance-free, sealed, immobilized electrolyte; rated capacities, voltages, main dimensions, construction-details, requirements
DIN 43534:1983-11 Lead storage batteries; maintenance-free, sealed, immobilized electrolyte; rated capacities, voltages, main dimensions, construction-details, requirements
DIN 72311-18:1982 Lead storage batteries; starterbatteries with basic fastening 10,5 for passenger cars and commercial vehicles; nominal capacities, main dimensions
DIN EN 2591-704:2002 Aerospace series - Elements of electrical and optical connection; Test methods - Part 704: Electrical elements; Measurement of turns ratio on a transformer used in a coupler; German and English version EN 2591-704:2001
DIN EN 50123-7-3:1999 Railway applications - Fixed installations; D.C. switchgear - Part 7: Measurement, control and protection devices for specific use in d.c. traction systems; Section 3: Isolating voltage transducers and other voltage measuring devices; German version EN 50
DIN EN 61000-4-29:2001 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests (IEC 61000-4-29:2000); German version EN 61000-4-29:2000
DIN EN 61000-4-34:2008 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase (IEC 61000-4-34:2005); German version E

Professional Standard - Non-ferrous Metal, Voltage and specific capacity

YS/T 484-2005 Method for measuring the discharge capacity of the hydrogen storage alloys as the negative electrode of the metal hydride-nickel battery

Taiwan Provincial Standard of the People's Republic of China, Voltage and specific capacity

CNS 14676-1-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 1 : Overview
CNS 14676.1-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 1 : Overview
CNS 14676-2-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 2 : Electrostatic discharge immunity test
CNS 14676.2-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 2 : Electrostatic discharge immunity test
CNS 14676.5-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 5 : Surge immunity test
CNS 14676-5-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 5 : Surge immunity test
CNS 14676-3-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Prat 3 : Radiated ,radio-frequency ,electromagnetic field immunity test
CNS 14676.8-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 8: Power frequency magnetic field immunity test
CNS 14676-8-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 8: Power frequency magnetic field immunity test
CNS 14676.3-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Prat 3 : Radiated ,radio-frequency ,electromagnetic field immunity test
CNS 14676-9-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 9: Pulse magnetic field immunity test
CNS 14676.9-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 9: Pulse magnetic field immunity test
CNS 14676.4-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Prat 4 : Electrical fast transient/burst immunity test
CNS 14676-4-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Prat 4 : Electrical fast transient/burst immunity test
CNS 14676.10-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 10: Damped oscillatory magnetic field immunity test
CNS 14676-10-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 10: Damped oscillatory magnetic field immunity test
CNS 13213-1993 Procedures for Temperature and Irradiance Corrections to Measured I-V Characteristics of Crystalline Silicon Photovoltaic Devices
CNS 14676.6-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques- Part 6 : Immunity to conducted disturbances,induced by radio-frequency fields
CNS 14676-6-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques- Part 6 : Immunity to conducted disturbances,induced by radio-frequency fields
CNS 5540-1988 Environmental Testing Methods and Endurance Testing Methods for Discrete Semiconductor Devices (Reverse Bias Test of Variable Capacitance Diodes Under High Temperature)

Canadian Standards Association (CSA), Voltage and specific capacity

CSA IEC 61000-4-4-06-CAN/CSA:2006 Electromagnetic compatibility (EMC) ?Part 4-4: Testing and measurement techniques ?Electrical fast transient/burst immunity test Second Edition
CSA IEC 61000-4-30-04-CAN/CSA:2004 Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques Power quality measurement methods First Edition
CSA IEC 61000-4-11-05-CAN/CSA:2005 Electromagnetic Compatibility (EMC) - Part 4-11: Testing and measurement techniques . Voltage dips, short interruptions and voltage variations immunity tests Second Edition; IEC 61000-4-11:2004
CSA IEC 61000-4-14-01-CAN/CSA:2001 Electromagnetic Compatibility (EMC) - Part 4-14: Testing and Measurement Techniques - Voltage Fluctuation Immunity Test First Edition
CSA IEC 61000-4-34-06-CAN/CSA:2006 Electromagnetic compatibility (EMC) ?Part 4-34 :Testing and measurement techniques ?Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
CSA C60871-1-03-CAN/CSA-2003 Condensateurs shunt pour r閟eaux ?courant alternatif de tension assign閑 sup閞ieure ?1 000 V Partie 1: G閚閞alit閟 Caract閞istiques fonctionnelles, essais et valeurs assign閑s R鑗les de s閏urit? Guide d installation et d exploitation Deuxi鑝e Edit
CSA IEC 61000-4-7-03-CAN/CSA:2003 Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto First Edition; IEC 61000-4-7: 20
CAN/CSA-CEI/IEC 61000-4-11:2005 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (Second Edition)
CSA IEC 61000-4-3-07-CAN/CSA:2007 Electromagnetic compatibility (EMC) ?Part 4-3: Testing and measurement techniques ?Radiated, radio-frequency, electromagnetic field immunity test Second Edition
CSA IEC 61000-4-11-01-CAN/CSA:2001 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 11: Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests First Edition
CSA IEC 61000-4-2-01-CAN/CSA:2001 Electromagnetic Compatibility (EMC) - Part 4-2: Testing and Measurement Techniques - Electrostatic Discharge Immunity Test First Edition
CAN/CSA-CEI/IEC 61000-4-14:2001 Electromagnetic Compatibility (EMC) - Part 4-14: Testing and Measurement Techniques - Voltage Fluctuation Immunity Test (First Edition)
CSA CEI 61000-4-11-05-CAN/CSA-2005 Compatibilite Electromagnetique (CEM) - Partie 4-11: Techniques d'essai et de mesure . Essais d'immunit?aux creux de tension, coupures br鑦es et variations de tension Deuxieme Edition; CEI 61000-4-11:2004
CSA IEC 61000-4-5-01-CAN/CSA:2001 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 5: Surge Immunity Test First Edition
CSA CEI 61000-2-8:04-CAN/CSA-2004 Compatibilit?閘ectromagn閠ique (CEM) Partie 2-8: Environnement Creux de tension et coupures br鑦es sur les r閟eaux d撮lectricit?publics incluant des r閟ultats de mesures statistiques Premiere Edition
CSA CEI 61000-4-34-06-CAN/CSA-2006 Compatibilit?閘ectromagn閠ique (CEM) ?Partie 4-34: Techniques d'essai et de mesure ?Essais d'immunit?aux creux de tension coupures br鑦es et variations de tension pour mat閞iel ayant un courant appel?de plus de 16 A par phase
CAN/CSA-CEI/IEC 61000-4-14 AMD 1:2003 Amendment 1 Electromagnetic compatibility (EMC) – Part 4-14: Testing and measurement techniques – Voltage fluctuation immunity test (First Edition)
CAN/CSA-CEI/IEC 61000-4-34:2010 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (First Edition)
CSA IEC 61000-4-27-01-CAN/CSA:2001 Electromagnetic Compatibility (EMC) - Part 4-27: Testing and Measurement Techniques - Unbalance, Immunity Test First Edition; IEC 61000-4-27:2000

PL-PKN, Voltage and specific capacity

PN E83001-03-1987 Lead acid starter batteries Batteries of nomina? voltage 12 V Dimensions and capacities
PN E83001-02-1990 Lead-acid starter batteries Batteries of nomina? voltage 6 V Dimensions and capacities
PN-EN ISO 22553-3-2021-06 E Paints and varnishes--Electro-deposition coatings--Part 3: Compatibility of electro-deposition coating materials with a reference oil (ISO 22553-3:2019)

CU-NC, Voltage and specific capacity

NC 81-36-1987 Sugar Industry. Barometric Condensers. Quality Specifications
NC 90-01-39-1984 Metrological Assurance. Wires and Rollers for Measuring Threads. Verification Methods and Means

CH-SNV, Voltage and specific capacity

SN 177 066-1980 Guidelines for the use of large shunt capacitors in order to improve the reactive power and voltage ratio of distribution networks

ZA-SANS, Voltage and specific capacity

PIESA 1006-2004 Distribution transformers of size up to and including 500 kVA and operating at nominal voltages not exceeding 33 kV
SANS 61000-4-29:2005 Electromagnetic compatibility (EMC) Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
PIESA 1048-2007 Electricity supply - Quality of supply - Voltage characteristics, compatibility levels, limits and assessment methods
SANS 61000-4-5:2006 Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques - Surge immunity test
SANS 61000-4-14:2003 Electromagnetic compatibility (EMC) Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test
SANS 61000-4-11:2005 Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
NRS 048-2-2003 Electricity supply — Quality of supply Part 2: Voltage characteristics, compatibility levels, limits and assessment methods
NRS 048-2-2007 Ed 3 Electricity supply - Quality of supply Part 2: Voltage characteristics, compatibility levels, limits and assessment methods
NRS 048-2-2007 Electricity supply - Quality of supply Part 2: Voltage characteristics, compatibility levels, limits and assessment methods
SANS 61000-4-14:2009 Electromagnetic compatibility (EMC) Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

工业和信息化部, Voltage and specific capacity

YD/T 2829-2015 Electromagnetic compatibility requirements and measurement methods for sensing layer equipment

Professional Standard - Energy, Voltage and specific capacity

NB/T 20576-2019 Analysis of Neutron Flux Rate of Reactor Pressure Vessel in PWR Nuclear Power Plant
NB/T 41002-2011 Product quality classification of shunt capacitors used in AC power systems with nominal voltage above 1000V
NB/T 20161-2012 Installation and commissioning technical guideline for ex-core neutron flux measuring system for pressurized water reactor of nuclear power plants
NB/T 20161-2021 Technical regulations for installation and testing of external neutron fluence rate measurement system for pressurized water reactor nuclear power plants

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Voltage and specific capacity

JEDEC EIA-371-1970 Measurement of Small-Signal VHF-UHF Transistor Short-Circuit Forward Current Transfer Ratio

IEC - International Electrotechnical Commission, Voltage and specific capacity

IEC TR 62981:2017 Studies and comparisons of magnetic measurements on grain-oriented electrical steelsheet determined by the single sheet test method and Epstein test method (Edition 1.0)
IEC 61000-4-11 INT 1:2010 ELECTROMAGNETIC COMPATIBILITY (EMC) – Part 4-11: Testing and measurement techniques – Voltage dips@ short interruptions and voltage variations immunity tests (Edition 2.0)
IEC 61094-5:2016 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
IEC 61000-4-14/AMD1:1999 Amendment 1 Electromagnetic Compatibility (EMC) - Part 4-14: Testing and Measurement Techniques - Voltage Fluctuation Immunity Test (Edition 1.0)

American Society for Testing and Materials (ASTM), Voltage and specific capacity

ASTM E973-05a Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
ASTM E973-05 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
ASTM F1153-92(1997) Standard Test Method for Characterization of Metal-Oxide-Silicon (MOS) Structures by Capacitance-Voltage Measurements
ASTM F1392-00 Standard Test Method for Determining Net Carrier Density Profiles in Silicon Wafers by Capacitance-Voltage Measurements With a Mercury Probe

Chongqing Provincial Standard of the People's Republic of China, Voltage and specific capacity

DB50/T 494-2013 On-site testing specification for power transformer capacity of 66kV and below

European Committee for Standardization (CEN), Voltage and specific capacity

EN ISO 16526-1:2020 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011)
EN ISO 11114-6:2022 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 6: Oxygen pressure surge testing (ISO 11114-6:2022)
EN ISO 16526-3:2020 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
EN 16117-1:2011 Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 %
prEN ISO 11114-6:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 6: Oxygen pressure surge testing (ISO/DIS 11114-6:2021)
EN 2591-704:2001 Aerospace series - Elements of electrical and optical connection; Test methods - Part 704: Electrical elements; Measurement of turns ratio on a transformer used in a coupler

International Organization for Standardization (ISO), Voltage and specific capacity

ISO 16526-1:2011 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method
ISO 2604-3:1975 Steel products for pressure purposes; Quality requirements; Part III : Electric resistance and induction; Welded tubes
ISO 11114-6:2022 Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing
ISO 16526-3:2011 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method
ISO/TR 4869-4:1998 Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs

Electrostatic Discharge Association (ESDA), Voltage and specific capacity

ANSI/ESD STM97.2-2006 Floor Materials and Footwear - Voltage Measurement in Combination with a Person

ESD - ESD ASSOCIATION, Voltage and specific capacity

STM97.2-2006 FLOOR MATERIALS AND FOOTWEAR - VOLTAGE MEASUREMENT IN COMBINATION WITH A PERSON

Professional Standard - Railway, Voltage and specific capacity

TB/T 1651-1996 Calculation Conditions and Methods of Transformer Capacity in Traction Substation
TB/T 2713-1996 Method for determination of lubricating oil consumption of positive displacement air compressors for internal combustion and electric locomotives

European Telecommunications Standards Institute (ETSI), Voltage and specific capacity

ETSI ETR 019-1991 Transmission and Multiplexing Specification of New Generation High-Capacity Digital Radio Systems
ETSI EN 300 373-1-2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime mobile transmitters and receivers for use in the MF and HF bands; Part 1: Technical characteristics and methods of measurement (V1.4.1)
ETSI TS 102 883-2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra Wide Band (UWB); Measurement Techniques (V1.1.1)
ETSI EN 301 033-2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics and methods of measurement for shipborne watchkeeping receivers for reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and VHF bands (V1.4.1)

未注明发布机构, Voltage and specific capacity

ANSI/ESD STM97.2-2016 Floor Materials and Footwear - Voltage Measurement in Combination with a Person
AS/NZS 61000.4.11:2005(R2016) Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
DIN EN ISO 11114-6 E:2021-06 Gas cylinders Compatibility of cylinder and valve materials with gas content Part 6: Oxygen pressure surge testing (draft)
DIN EN 61094-5 E:2015-07 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison

RO-ASRO, Voltage and specific capacity

STAS 11612/4-1981 Instrument transformers VOLTAGE TRANSFORMERS CAPACITIVE Special technical requirements for quality

Standard Association of Australia （SAA）, Voltage and specific capacity

AS/NZS 61000.4.14:2007 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage fluctuation immunity test
AS/NZS 61000.4.11:2005 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11, Ed. 2.0 (2004) MOD)
AS/NZS IEC/TR 61000.2.8:2009 Electromagnetic Compatibility (EMC) Environment Voltage dips and short interruptions in public power supply systems with statistical measurements
AS/NZS 61000.4.34:2012 Electromagnetic compatibility (EMC), Part 4.34: Testing and measurements techniques — Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
AS/NZS 61000.4.7:2012 Electromagnetic Compatibility (EMC) Test and Measurement Technology General guidance on harmonic and inter-harmonic measurements and instrumentation of power supply systems and equipment connected to them
AS 1289.5.8.9:1998(R2013) Soil Testing Methods for Engineering Soil Compaction and Density Testing Nuclear Surface Moisture Densitometer Moisture Content of Standard Moisture Blocks Comparison with Primary Blocks
AS/NZS 61000.4.14:2012 Electromagnetic compatibility (EMC) Testing and measurement technology Immunity tests to voltage fluctuations for equipment with an input current not exceeding 16 A per phase
AS/NZS 61000.3.12:2006 Electromagnetic compatibility (EMC) - Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and <=75 A per phase

Jiangsu Provincial Standard of the People's Republic of China, Voltage and specific capacity

DB32/T 3711-2020 Technical specifications for shore power connection system of low-voltage small-capacity ships in inland rivers

KR-KS, Voltage and specific capacity

KS C IEC TR 62981-2021 Studies and comparisons of magnetic measurements on grain-oriented electrical steelsheet determined by the single sheet test method and Epstein test method
KS C IEC 61094-5A-2017 Electroacoustics — Measurement microphones — Part 5: Methods for pressure calibration of working standard microphones by comparison
KS C IEC 61000-3-12-2013 Electromagnetic compatibility(EMC)－Part 3-12：Limits－Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and≤75 A per phase
KS C 9610-3-12-2023 Electromagnetic compatibility(EMC) — Part 3-11: Limits — Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase
KS C IEC 61000-4-34-2016 Electromagnetic compatibility(EMC) — Part 4-34: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Voltage and specific capacity

ITU-T G.166 FRENCH-1988 CHARACTERISTICS OF SYLLABIC COMPANDORS FOR TELEPHONY ON HIGH CAPACITY LONG DISTANCE SYSTEMS
ITU-T G.166-1989 Characteristics of Syllabic Compandors for Telephony on High Capacity Long Distance Systems - General Characteristics of International Telephone Connections and Circuits (Study Groups XII and XV) 7 pp

CENELEC - European Committee for Electrotechnical Standardization, Voltage and specific capacity

EN 50361:2001 Basic Standard for the Measurement of Specific Absorption Rate Related to Human Exposure to Electromagnetic Fields from Mobile Phones (300 MHz - 3 GHz)
EN 61000-4-11:1994 Electromagnetic Compatibility (EMC) Part 4: Testing and Measurement Techniques Section 11: Voltage Dips@ Short Interruptions and Voltage Variations Immunity Tests

Lithuanian Standards Office , Voltage and specific capacity

LST ISO 11223:2007 Petroleum and liquid petroleum products - Direct static measurements - Measurement of content of vertical storage tanks by hydrostatic tank gauging (identical ISO 11223:2004)
LST EN 61000-4-11-2004 Electromagnetic compatibility (EMC). Part 4-11: Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11:2004)
LST EN 60512-25-7-2005 Connectors for electronic equipment. Tests and measurements. Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR) (IEC 60512-25-7:2004)
LST EN 61000-4-29-2003 Electromagnetic Compatibility (EMC). Part 4-29: Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests (IEC 61000-4-29:2000)
LST EN 61000-4-34-2007 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (IEC 61000-4-34:2005)
LST EN 2591-704-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 704: Electrical elements - Measurement of turns ratio on a transformer used in a coupler

YU-JUS, Voltage and specific capacity

JUS N.N6.133-1980 Radiocommunications. TV receivers. Methods of measurements. Compatibility with signal recording equipment
JUS N.N6.183-1978 Radio Communications. Wire? distribution systems. Methods ofmeasurements. RF signal to noise ratio. Calibration ofthe selective voltmeter
JUS N.R8.161-1982 Cores for inductors and transformers for telecommunications. Common measuring methods. Variation f permeabi!ity with temperature

Professional Standard - Post and Telecommunication, Voltage and specific capacity

YD/T 2655-2013 Electromagnetic Compatibility Requirements and Measurement Methods for Video Surveillance Equipment Connected to Telecommunications Networks
YD/T 3036-2023 Technical requirements for mass storage interface characteristics between Universal Integrated Circuit Card (UICC) and terminals
YD/T 3037.2-2023 Test method for characteristics of mass storage interface between Universal Integrated Circuit Card (UICC) and terminals Part 2: UICC
YD/T 3037.1-2023 Test method for characteristics of mass storage interface between Universal Integrated Circuit Card (UICC) and terminal - Part 1: Terminal

National Metrological Technical Specifications of the People's Republic of China, Voltage and specific capacity

JJF 1701.5-2019 Program of Pattern Evaluation of Instrument Transformers—Part 5:Capacitor Voltage Transformers

VDI - Verein Deutscher Ingenieure, Voltage and specific capacity

VDI 4471 Blatt 1-2009 Anti-theft systems for goods - Technology comparison and compatibility of electronic article surveillance system (EAS) referred to the source tagging - Fundamentals

Institute of Electrical and Electronics Engineers (IEEE), Voltage and specific capacity

IEEE Std 1453.1-2012 (Adoption of IEC/TR 61000-3-7:2008) IEEE Guide--Adoption of IEC/TR 61000-3-7:2008, Electromagnetic compatibility (EMC)--Limits--Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
IEEE P1453.1/D1, February 2012 IEEE Draft Adoption of IEC/TR 61000-3-7:2008, Electromagnetic compatibility (EMC)-Limits-Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
IEEE Std C57.12.51-2008 Ventilated dry-type power transformers, 501 kVA and larger, three-phase, with high-voltage 601 V to 34500 V; low-voltage 208Y/120 V to 4160 V - General requirements
IEEE Std C57.115-1991 Guide for loading mineral-oil-immersed power transformers rated in excess of 100 MVA (65 C winding rise)

Danish Standards Foundation, Voltage and specific capacity

DS/EN 61000-4-11:2004 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
DS/EN 61000-4-14/A1:2004 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test
DS/EN 61000-4-14:2000 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test
DS/EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
DS/EN 61000-4-11:1994 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 11: voltage dips,short interruptions and voltage variations immunity tests
DS/EN 61000-4-29:2001 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
DS/EN 61000-4-34/A1:2009 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
DS/EN 61000-4-34:2007 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
DS/IEC/TR 61000-2-8:2003 Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
DS/EN 61000-4-7/A1:2009 Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
DS/EN 61000-4-7/Corr.1:2004 Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
DS/EN 61000-4-7:2002 Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
DS/EN 2591-704:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 704: Electrical elements - Measurement of turns ratio on a transformer used in a coupler

Indonesia Standards, Voltage and specific capacity

SNI IEC 61000-4-11:2013 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

ES-UNE, Voltage and specific capacity

UNE-EN ISO 11114-6:2023 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 6: Oxygen pressure surge testing (ISO 11114-6:2022)
UNE-EN 61094-5:2017 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
UNE-EN IEC 61000-4-11:2021/AC:2022-10 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
UNE-EN IEC 61000-4-11:2021 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
UNE-EN 2591-704:2001 Aerospace series- Elements of electrical and optical connection- Test methods- Part 704: Electrical elements- Measurement of turns ratio on a transformer used in a coupler. (Endorsed by AENOR in April of 2002.)

TH-TISI, Voltage and specific capacity

TIS 1460-2009 Electromagnetic compatibility (emc).part 4: testing and measurement techniques.section 11: voltage dips, short interruptions and voltage variations immunity tests

GOSTR, Voltage and specific capacity

GOST IEC/TR 61000-3-14-2019 Electromagnetic compatibility (EMC). Part 3-14. Assessment of emission limits of harmonic, interharmonic, voltage fluctuation and unbalance for the connection of disturbing installations to LV power systems

Insulated Cable Engineers Association （ICEA), Voltage and specific capacity

ICEA T-32-645-2012 TEST METHOD FOR ESTABLISHING VOLUME RESISTIVITY COMPATIBILITY OF WATER BLOCKING COMPONENTS WITH EXTRUDED SEMICONDUCTING SHIELD MATERIALS

Inner Mongolia Provincial Standard of the People's Republic of China, Voltage and specific capacity

DB15/T 1613.4-2019 Mobile Pressure Vessel Information Platform Part 4: Technical Specifications for Electronic Tags and Read-Write Equipment??

Professional Standard-Ships, Voltage and specific capacity

CB/T 4314-2013 Measurement and calculation methods for the properties of underwater practice piezoelectric ceramics element
CB/T 1194-1988 Measurement and Calculation Method of Performance Parameters of Piezoelectric Ceramic Components Used in Underwater Acoustics

WRC - Welding Research Council, Voltage and specific capacity

BULLETIN 434-1998 DESIGN AND INSERVICE MARGINS OF POWER PIPING SYSTEMS: A COMPARATIVE STUDY OF U. S.@ CANADIAN AND EUROPEAN CODES & STANDARDS

NZ-SNZ, Voltage and specific capacity

SA/SNZ TR IEC 61000.3.14:2013 Electromagnetic compatibility (EMC) Part 3.14: Limits - Assessment of emission limits for harmonics, interharmonics, voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems

American National Standards Institute （ANSI), Voltage and specific capacity

ANSI C57.12.57-1987 Transformers - Ventilated Dry-Type Network Transformers 2500 kVA and Below, Three-Phase, with High-Voltage 34 500 Volts and Below, Low-Voltage 216Y/125 and 480Y/277 Volts- Requirements This is Now Copyrighted by IEEE
ANSI C57.12.52-1981 Requirements for Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts
ANSI C57.12.51-1981 Dry-Type Power Transformers 501 kVA and Larger, Three-Phase with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts, Requirements for Ventilated
ANSI/IEEE C57.12.51:2008 Standard for Ventilated Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34500 Volts; Low-Voltage 208Y/120 to 4160 Volts - General Requirements
ANSI/ASA S1.15-5-2021 American National Standard Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
ANSI C57.12.50-1981 Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase and 15 to 500 kVA, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 120 to 600 Volts, Requirements for; Correction June 1982
ANSI/EIA 364-108:2000 Impedance, Reflection Coefficient, Return Loss, and VSWR Test Procedure Measured in the Time and Frequency Domain for Electrical Connectors, Cable Assemblies or Interconnection Systems

GB-REG, Voltage and specific capacity

REG NASA-LLIS-2046-2009 Lessons Learned ?Limitations of Internal Protective Devices in High-Voltage/High- Capacity Batteries Using Lithium-Io

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Voltage and specific capacity

IEEE C63.4-1988 ELECTROMAGNETIC COMPATIBILITY - RADIO- NOISE EMISSIONS FROM LOW-VOLTAGE ELECTRICAL AND ELECTRONIC EQUIPMENT IN THE RANGE OF 10 KHZ TO 1 GHZ - METHODS OF MEASUREMENT
IEEE 62582-2-2011 Nuclear power plants – Instrumentation and control important to safety – Electrical equipment condition monitoring methods – Part 2: Indenter modulus

European Association of Aerospace Industries, Voltage and specific capacity

AECMA PREN 2591-G4-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part G4 - Electrical Elements Measurement of Turns Ratio on a Transformer Used in a Coupler Edition P 1
AECMA PREN 2591-G5-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part G5 - Electrical Elements Measurement of Stub Input Impedance of Couplers Edition P 1

IN-BIS, Voltage and specific capacity

IS 4545 Pt.8-1983 Methods of measurement of television broadcast transmission receivers Part 8 Compatibility with audio and video recording equipment

Acoustical Society of America (ASA), Voltage and specific capacity

ASA S1.15 PART 5-2021 American National Standard Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison