ZH
RU
ES
Other test equipment
Other test equipment, Total:497 items.
In the international standard classification, Other test equipment involves: Environmental testing, Mechanical testing, Insulation, Lamps and related equipment, Products of the textile industry, Standardization. General rules, Surface treatment and coating, Particle size analysis. Sieving, Products of the chemical industry, Linear and angular measurements, Electrical and electronic testing, Textile fibres, Vocabularies, Shipbuilding and marine structures in general, Machine tools, Equipment for entertainment, Testing of metals, Petroleum products in general, Aerospace engines and propulsion systems, Geology. Meteorology. Hydrology, Leather technology, Analytical chemistry, Footwear, Construction materials, Medical equipment, Diagnostic, maintenance and test equipment, Pesticides and other agrochemicals, General methods of tests and analysis for food products, Electromechanical components for electronic and telecommunications equipment, Plastics, Shop fittings, Dentistry, Nuclear energy engineering, Electromagnetic compatibility (EMC), Measurement of fluid flow, Wood-based panels, Installations in buildings, Glass, Technical drawings, Paper products, Paint ingredients, Corrosion of metals, Road vehicles in general, Optoelectronics. Laser equipment, Radiation measurements, Radiation protection, Animal feeding stuffs, Power transmission and distribution networks, Items of art and handicrafts, Electricity. Magnetism. Electrical and magnetic measurements, Transformers. Reactors, Burners. Boilers, Measurement of volume, mass, density, viscosity, Rubber and plastics products, Electrical engineering in general, Hand-held tools, Gears, Audio, video and audiovisual engineering, Printed circuits and boards, Electrical wires and cables, Fuels, Raw materials for rubber and plastics, Waxes, bituminous materials and other petroleum products, Road engineering, Protection against fire, Components for electrical equipment, Optical equipment, On-board equipment and instruments, Agricultural machines, implements and equipment, Optics and optical measurements, Office machines, Paper and board, Road vehicle systems, Pipeline components and pipelines, Cereals, pulses and derived products, Protection against dangerous goods, Characteristics and design of machines, apparatus, equipment, Fibre optic communications, Non-destructive testing, Industrial trucks, Equipment for manual handling, Furniture, Test conditions and procedures in general, Hydraulic fluids, Organic chemicals, Iron and steel products.
BE-NBN, Other test equipment
RU-GOST R, Other test equipment
- GOST R 51371-1999 Mechanical environment stability test methods for machines, instruments and other industrial products. Test for influence of shocks
- GOST R 52561-2006 Mechanical environment stability test methods for machines, instruments and other industrial products. Test methods for influence of shocks by free fall, shocks by drop on account of topple, influence of rocking and prolonged pitches
- GOST R 51805-2001 Mechanical environment stability test methods for machines, instruments and other industrial products. Tests for influences of acceleration steady state
- GOST R IEC 60068-3-8-2015 Environmental dynamic testing for machines, instrument and other articles. Selecting amongst vibration tests
- GOST R 51911-2002 Mechanical environment stability test methods for machines, instruments and other industrial products. Bending, torn, tensile and compression tests of electrical terminals, fittings and other parts being connecting up
- GOST 30630.1.1-1999 Mechanical environment stability test methods for machines, instruments and other industrial products. Determination of dynamic characteristics of structure
- GOST R 52862-2007 Mechanical environment stability test methods for machines, instruments and other industrial products. Test methods for acoustic noise (vibration, acoustic component)
- GOST R 52762-2007 Mechanical environment stability test methods for machines, instruments and other industrial products. Test methods for bumps to enclosure of products
- GOST R 51499-1999 Environmental dynamic testing for machines, instruments and other articles. Vibration. Time-history method
- GOST 30546.2-1998 Seismic stability tests for machines, instruments and other industrial products. General guidance and test methods
- GOST 31419-2010 Environmental dynamic test methods for machines, instruments and other technical articles. Mixed mode vibration tests
- GOST 31418-2010 Environmental dynamic test methods for machines, instrument and other technical articles. Shock tests with shock response spectrum synthesis
- GOST R ISO 8325-2010 Dental rotary instruments. Test methods
- GOST IEC 60068-2-57-2016 Environmental dynamic testing for machines, instrument and other articles. Vibration. Time-history and sine-beat method
- GOST R 51369-1999 Climatic environment stability test methods machines, instruments and other industrial products. Test for influence of humidity
- GOST 30630.2.5-2013 Climatic environment stability test methods for machines, instruments and other industrial products. Test methods for salt mist
- GOST R 53190-2008 Environmental dynamic test methods for machines, instruments and other technical articles. Shock tests with shock response spectrum synthesis
- GOST 30630.2.6-2013 Climatic environment stability test methods for machines instruments and other industrial products. Test methods for water influence
- GOST R 51370-1999 Climatic environment stability test methods for machines, instruments and other industrial products. Test for influence of solar radiation
- GOST R 51368-1999 Climatic environment stability test methods for machines, instruments and other industrial products. Test for stability influence of temperature
- GOST R 51502-1999 Environmental dynamic testing for machines, instruments and other articles. Exposure to broad-band random vibration (digital control)
- GOST 30630.2.1-2013 Climatic environment endurance test methods for machines, instruments and other industrial products. Test for stability influence of temperature
- GOST R 51802-2001 Aggressive and other special media stability test methods for machines, instruments and other industrial products
- GOST 25258-1982 Electrometric measurement means. Acceptance rules and test methods
- GOST R 51804-2001 Environment, stability test methods for machines, instruments and other industrial products. Combined tests
- GOST 30630.2.7-2013 Climatic environment stability test methods for machines instruments and other industrial products. Test methods for dust (sand) influence
- GOST 30630.1.2-1999 Mechanical environment stability test methods for machines, instruments and other industrial products. Tests for influences of vibration
- GOST R IEC 773-1996 Brushes for electrical machines. Test methods and apparatus for the measurement of the operational characteristics
- GOST 33677-2015 Machines and instruments for inter-row and row tillage. Test methods
- GOST 25651-2015 Testing and measuring instruments for vehicles. Technical requirements and test methods
- GOST 29016-1991 Vitreous and porcelain enamels. Apparatus for testing with acid and neutral liquids and their vapours
- GOST R 51684-2000 Climatic environment stability test methods of machines, instruments and other industrial products. Test for low air pressure
- GOST R 51909-2002 Environment stability test methods for machines, instruments and other industrial products. Tests for transportation and storage
- GOST 30630.1.9-2015 Mechanic environment stability test methods for machines, instruments and other industrial products. Features of digital control of random vibration testing
- GOST 30630.1.6-2013 Mechanical environment stability test methods for machines instruments and other industrial products. Bending, torn, tensile and compression tests of electrical terminals, fittings and other parts being connecting up
- GOST 30630.1.8-2002 Test methods for resistance to environmental factors of machines, instruments and other articles. Time-history vibration tests
- GOST 30630.1.5-2013 Mechanical environment stability test methods for machines, instruments and other industrial products. Test methods for acoustic noise (vibration, acoustic component)
- GOST R 57427-2017 Textile. Test methods for nonwovens. Part 10. Determination of lint and other particles generation in the dry state
YU-JUS, Other test equipment
- JUS N.H9.102-1987 Measuring current transformers. Additional reguirements
- JUS B.E8.095-1987 Laboratory glassware. Methods for thermal shock test
- JUS N.A5.706-1980 Basic environmental testing procedures. Test Ab: Cold fornon heat-?issipating components, equipment or other articles with gradual change of temperature
- JUS N.A5.705-1980 Basic environmental testing procedures. Test Aa: Cold of non heat-dissipating components, ajuipment or other articles with sudden change of temperature
Taiwan Provincial Standard of the People's Republic of China, Other test equipment
- CNS 12249-1988 Subsidiary Methods of Test for Pressure-Sensitive Adhesive Tapes for Electrical Insulation
- CNS 2604.1-1988 Subsidiary Methods of Test for Varnishe for Electrical Insulation
- CNS 2604-1-1988 Subsidiary Methods of Test for Varnishe for Electrical Insulation
- CNS 4798.10-1994 Method of test for toy safety (Testing for lead and other hazardous heavy metals content)
- CNS 4798-10-1994 Method of test for toy safety (Testing for lead and other hazardous heavy metals content)
- CNS 14711-2002 Metallic and other non- organic coatings-Sulfur dioxide test with general condensation of moisture
- CNS 12081-1987 Method of Test for Fiber Optic Devices (FOPT-13 Visual and Mechanical Inspection of Fibers,Cables,Connectors and Other Fiber Optic Devices)
American Society for Testing and Materials (ASTM), Other test equipment
- ASTM D3511/D3511M-15 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
- ASTM D4970/D4970M-16 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
- ASTM D502-89(2003) Standard Test Method for Particle Size of Soaps and Other Detergents
- ASTM B244-09(2021) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM B244-09 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM B244-09(2014) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM D6500-00(2012)e1 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
- ASTM B244-97 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM B244-97(2002) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- ASTM D502-89(2009) Standard Test Method for Particle Size of Soaps and Other Detergents
- ASTM D3511-07 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
- ASTM D3511-05 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
- ASTM D3511-07a Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
- ASTM D6500-00(2006) Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
- ASTM D6500-00 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
- ASTM D3512/D3512M-10(2014) Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
- ASTM D6466-99(2005) Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
- ASTM D6466-99 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
- ASTM D3514-02 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad
- ASTM D3512-05(2007)e1 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
- ASTM D3512-07 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
- ASTM D3511-99a Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
- ASTM D1574-04 Standard Test Method for Extractable Matter in Wool and Other Animal Fibers
- ASTM D1574-04(2008) Standard Test Method for Extractable Matter in Wool and Other Animal Fibers
- ASTM D1574-04(2013) Standard Test Method for Extractable Matter in Wool and Other Animal Fibers
- ASTM D3512-02 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
- ASTM D3512-99a Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
- ASTM D5795-95(2000) Standard Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via "Cobb Ring" Apparatus
- ASTM D5795-95(2008) Standard Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via
x201C;Cobb Ringx201D; Apparatus - ASTM D5795-16 Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via &x201c;Cobb Ring&x201d; Apparatus
- ASTM D2130-90(2001) Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection
- ASTM F129-97(2008) Standard Practice for Amount of Ink Deposit on Carbon Paper and Inked Ribbons, Other Than Fabric Type
- ASTM D465-01 Standard Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related Products
- ASTM D465-96 Standard Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related Products
- ASTM D2130-22 Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection
- ASTM D2130-90(2008) Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection
- ASTM D2130-13 Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection
- ASTM D6801-07 Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials
- ASTM D1113-13 Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool
- ASTM D1113-90a(2008) Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool
- ASTM E352-93(2006) Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
- ASTM E352-93(2000)e1 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
- ASTM E1740-07 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
- ASTM E1740-07a Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
- ASTM E1740-02 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
- ASTM E1740-01 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
- ASTM E1740-00 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
- ASTM D6986-03(2010) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
- ASTM G56-18 Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials
- ASTM E2298-13a Standard Test Method for Instrumented Impact Testing of Metallic Materials
- ASTM E2298-15 Standard Test Method for Instrumented Impact Testing of Metallic Materials
- ASTM E2298-13 Standard Test Method for Instrumented Impact Testing of Metallic Materials
- ASTM F1089-02 Standard Test Method for Corrosion of Surgical Instruments
- ASTM E2546-07 Standard Practice for Instrumented Indentation Testing
- ASTM D5417-99(2003) Standard Practice for Operation of the Vettermann Drum Tester
- ASTM D5417-99 Standard Practice for Operation of the Vettermann Drum Tester
- ASTM F1089-10 Standard Test Method for Corrosion of Surgical Instruments
- ASTM E2546-15(2023) Standard Practice for Instrumented Indentation Testing
- ASTM E979-91(1998) Standard Test Method for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids
- ASTM D3514-05 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad
- ASTM E979-91(2004) Standard Test Method for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids
- ASTM F25-04 Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
- ASTM D6683-14 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
- ASTM D3514/D3514M-10(2014) Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad
- ASTM E2298-09 Standard Test Method for Instrumented Impact Testing of Metallic Materials
- ASTM C1245-93 Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures Point Load Test
- ASTM D2505-88(2004)e1 Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
- ASTM E354-93(2006) Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
- ASTM D5827-95(2002) Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
- ASTM D5827-95 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
- ASTM D2505-88(2010) Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
- ASTM D5827-09 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
Professional Standard - Light Industry, Other test equipment
- QB/T 2559-2002 Guidelines on types of apparatus glass their composition and test methods
- QB/T 2561-2002 Laboratory glassware ----Test tubes and culture tubes
British Standards Institution (BSI), Other test equipment
- BS EN ISO 4541:1979 Metallic and other non-organic coatings - Corrodkote test (CORR test)
- BS EN ISO 26203-2:2011 Metallic materials. Tensile testing at high strain rates. Servo-hydraulic and other test systems
- BS EN 12390-1:2012 Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds
- BS EN 1528-4:1997 Fatty food - Determination of pesticides and polychlorinated biphenyls (PCBs) - Determination, confirmatory tests, miscellaneous
- BS EN ISO 4543:1995 Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions
- BS EN 12390-1:2000 Testing hardened concrete - Shape, dimensions and other requirements for specimens and moulds
- BS EN 12390-1:2021 Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds
- BS EN 61000-4-23:2001 Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances
- BS EN ISO 6988:1986 Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture
- BS EN ISO 10289:2001 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests
- BS 2782-8 Method 826A:1992 Methods of testing plastics - Other properties - Determination of adhesion of print on plastics sheet
- BS EN ISO 9073-10:2005 Textiles - Test methods for nonwovens - Lint and other particles generation in the dry state
- BS 756:1952 Specification for Dean and Stark apparatus
- BS EN 61189-3:2008 Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Test methods for interconnection structures (printed boards)
- BS EN ISO 4521:2008 Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods
- BS 598-110:1998 Sampling and examination of bituminous mixtures for roads and other paved areas. Methods of test for the determination of wheel-tracking rate and depth
- BS ISO 16331-1:2012 Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Performance of handheld laser distance meters
- BS ISO 10109-7:2001 Optics and optical instruments - Environmental requirements - Test requirements for optical measuring instruments
- BS ISO 6487:2015+A1:2017 Road vehicles. Measurement techniques in impact tests. Instrumentation
- BS 5131-4.2:1990 Methods of test for footwear and footwear materials - Other components - Flexing index of fibreboard
- BS EN ISO 14556:2000 Steel - Charpy V-notch pendulum impact test - Instrumented test method
- BS ISO 10587:2000 Metallic and other inorganic coatings - Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods - Inclined wedge method
- BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
PL-PKN, Other test equipment
- PN M53864-1985 Electrical temperatur? measuring instruments and their accessories Requirements and tests
- PN E08120-1986 Electrical measuring instruments Safety requirements and tests
Association Francaise de Normalisation, Other test equipment
- NF A05-104*NF EN ISO 4541:1995 Metallic and other non-organic coatings. Corrodkote corrosion test (CORR test).
- NF G52-202:1976 Leathers and hides. Chemical testing of leather. Determination of water and other volatile substances.
- NF G62-020:1983 Footwear. Test methods. Determination of the resistance of laces to the cutting effect of accessories.
- NF EN ISO 12867:2010 Instruments ophtalmiques - Montures d'essai
- NF A91-142:2003 Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test.
- NF A05-106*NF EN ISO 6988:1995 Metallic and other non-organic coatings. Sulfur dioxide test with general condensation of moisture.
- NF A91-118*NF EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests.
- NF P18-430-1:2012 Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds
- NF A05-105*NF EN ISO 4543:1995 Metallic and other non-organic coatings. General rules for corrosion tests applicable for storage conditions.
- NF S93-042*NF EN 1618:1997 Catheters other than intravascular catheters. Test methods for common properties.
- NF S10-140:1999 Optics and optical instruments - Lasers and laser-related equipments Electromagnetic compatibility (EMC) - Requirements and tests.
- NF D30-500/A1:1997 Test gases - Test pressures - Appliances categories.
- NF S10-019:1998 Raw optical glass in bulk and preshaped forms. Bubbles and other inclusions. Test method and classification.
- NF C42-100-9*NF EN IEC 60051-9:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 9 : recommended test methods
- NF S10-030:1994 Optics. Optical instruments. Environmental test methods.
- NF E05-059-1:2003 Geometrical products specification (GPS) - Acceptance tests and reverification tests of profile measuring instruments - Part 1 : measuring instruments for areal surface texture.
- NF C41-105*NF EN 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1 : requirements for instruments
- NF EN 61083-1:2001 Appareils et logiciels utilisés pour les mesures pendant les essais de choc à haute tension - Partie 1 : prescriptions pour les appareils
- NF V03-080-4*NF EN 1528-4:1997 Fatty food. Determination of pesticides and polychlorinated biphenyls (pcbs). Part 4 : determination, confirmatory tests, miscellaneous.
- NF C93-701/A1*NF EN 61189-1/A1:2002 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 1 : general test methods and methodology
- NF ISO 6487:2015 Véhicules routiers - Techniques de mesurage lors des essais de chocs - Instrumentation
- NF A03-015:2001 Steel - Charpy V-notch pendulum impact test - Instrumented test method.
Japanese Industrial Standards Committee (JISC), Other test equipment
- JIS F 0028:1989 Glossary of terms for shipbuilding (Machinery -- Testing, working practice, miscellaneous)
- JIS F 0028:2005 Shipbuilding -- Glossary of terms -- Machinery -- Testing, working practice, miscellaneous
- JIS B 7755:2011 Charpy pendulum impact test for metal -- Instrumentation
- JIS C 60068-2-47:2004 Environmental testing -- Part 2-47: Test methods -- Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests
- JIS T 5502:1993 Dental rotary instruments -- Test methods
- JIS T 5502:2001 Dental rotary instruments -- Test methods
- JIS T 5502:2013 Dental rotary instruments -- Test methods
- JIS B 1758:2013 Acceptance tests for gear measuring instruments
- JIS C 1102-9:1997 Direct acting indicating analogue electrical measuring instruments and their accessories Part 9: Recommended test methods
- JIS B 7728:1997 Calibration of force-proving instruments used for the verification of uniaxial testing machines
- JIS F 8001:1976 Method of watertight testing for marine electric appliances
- JIS B 7755:1993 Impact testing machines for metallic materials -- Instrumentation
- JIS T 7332:2005 Ophthalmic instruments -- Fundamental requirements and test methods
- JIS B 7912-6:2007 Field procedures for testing geodetic and surveying instruments -- Part 6: Rotating lasers
- JIS F 0807:1999 General requirements for environmental tests of control and instrumentation equipment for marine use
ZA-SANS, Other test equipment
- SANS 4541:1978 Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test)
Professional Standard - Railway, Other test equipment
- TB/T 3540.3-2018 Test methods for traction thermal performance of diesel locomotives Part 3: Other tests
- TB/T 2479.11-1993 General test methods for line machinery and other track working machinery
- TB/T 2328.17-1992 Test method for content of clay mass and other impurities in railway crushed stone ballast
Korean Agency for Technology and Standards (KATS), Other test equipment
- KS B ISO 8956-2004(2009) Acceptance conditions for copying attachments, integral or otherwise, for lathes－Testing of the accuracy
- KS P ISO 12867:2021 Ophthalmic instruments — Trial frames
- KS C IEC 60512-9-2003(2008) Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 9：Miscellaneous tests
- KS P ISO 9801:2021 Ophthalmic instruments — Trial case lenses
- KS C IEC 60811-412:2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
- KS L 7104-2002 Enamel apparatus for laboratory
- KS M 2670-1999 Glasswares for testing apparatus of petroleum products
- KS C 1001-1970 Impulse voltage testing for instrument transformers
- KS M 2670-1994 Glasswares for testing apparatus of petroleum products
- KS M 2670-1999(2021) Glasswares for testing apparatus of petroleum products
- KS R 1158-2012 Characteristics of measuring instruments for the collision test
- KS B 5551-2004(2019) Impact testing machines for metallic materials－Instrumentation
- KS L ISO 4787:2006 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
- KS L ISO 4787:2016 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
- KS R 1158-2002(2007) Characteristics of measuring instruments for the collision test
- KS C IEC 61083-1-2006(2021) Instruments and software used for measurements in high-voltage impulse tests Part 1：Requirements for instruments
- KS C IEC 61083-1:2022 Instruments and software used for measurements in high-voltage and high-current tests — Part 1: Requirements for instruments for impulse tests
- KS B ISO 14556:2002 Steel-Charpy V-notch pendulum impact test-Instrumented test method
- KS B ISO 14577-1-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 1：Test method
- KS B ISO 14556:2015 Steel－Charpy V－notch pendulum impact test－Instrumented test method
- KS C IEC 60811-410:2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 410: Miscellaneous tests ― Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
- KS B ISO 15004:2003 Ophthalmic instruments-Fundamental requirements and test methods
- KS B ISO 15004:2013 Ophthalmic instruments ― Fundamental requirements and test methods
- KS B ISO 15004-2013(2018) Ophthalmic instruments ― Fundamental requirements and test methods
- KS C IEC 61083-1:2006 Instruments and software used for measurement in High-voltage impulse tests－Part 1：Requirements for instruments
- KS D ISO 3613:2002 Metallic and other inorganic coatings－Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys－Test methods
- KS D ISO 3613-2012(2017) Metallic and other inorganic coatings－Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys－Test methods
SE-SIS, Other test equipment
- SIS SMS 2966-1972 Metallic and other non-organic coatings. Acetic acid salt spray test. ACSS test
- SIS SMS 2965-1972 Metallic and other non-organic coatings. Copper accelerated acetic acid salt spray test. CASS test
- SIS SS-EN 27 786-1992 Dental rotary instruments — Laborator/ abrasive instruments (ISO 7786:1990)
German Institute for Standardization, Other test equipment
- DIN 51854:1993 Testing of gaseous fuels and other gases; determination of ammonia content
- DIN 51755:1974 Testing of Mineral Oils and Other Combustible Liquids; Determination of Flash Point by the Closed Tester according to Abel-Pensky
- DIN EN ISO 12867:2010-11 Ophthalmic instruments - Trial frames (ISO 12867:2010); German version EN ISO 12867:2010
- DIN EN ISO 6988:1997 Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985); German version EN ISO 6988:1994
- DIN 19217:1998 Measuring systems for liquids other than water - Definitions, requirements and testing (OIML R 117:1995)
- DIN EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment (IEC 62052-11:2003); German version EN 62052-11:2003
- DIN 58502:1990 Drawing instruments; requirements, testing
- DIN 70020-3:1986 Automotive engineering; maximum speed; accelleration and other terms, definitions and tests
- DIN 51864:1986 Testing of gaseous fuels and other gases; determination of nitrogen monoxide content; Saltzman method
- DIN EN ISO 10289:2001 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests (ISO 10289:1999); German version EN ISO 10289:2001
- DIN EN ISO 4521:2009 Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods (ISO 4521:2008); English version of DIN EN ISO 4521:2009-01
- DIN 51872-5:1996 Testing of gaseous fuels and other gases - Determination of the components - Part 5: Capillary gaschromatographic procedure
- DIN EN ISO 4541:1995 Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978); German version EN ISO 4541:1994
- DIN EN 61000-4-23:2001 Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques; Test methods for protective devices for HEMP and other radiated disturbances (IEC 61000-4-23:2000); German version EN 61000-4-23:2000
- DIN EN ISO 8325:2004 Dentistry - Test methods for rotary instruments (ISO 8325:2004); German version EN ISO 8325:2004
- DIN EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments (IEC 61083-1:2001); German version EN 61083-1:2001
- DIN 53436-1:1981 Producing thermal decomposition products from materials in an air stream and their toxicological testing; decomposition apparatus and determination of test-temperature
Society of Automotive Engineers (SAE), Other test equipment
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Other test equipment
- GB/T 22541-2008 Instrument for soil test.Compaction apparatus
- GB/T 9357-2008 Instrument for soil test.Permeameter
- GB/T 12745-2007 Geotechnical engineering instrument for test.Cone static or dynamic penetrometer
- GB/T 12746-2007 Geotechnical engineering instrument for test.Penetration test apparatus
- GB/T 30244-2013 Oscillographic polarograph and its test solution
- GB/T 28493-2012 Test method for rating vending machines for bottled,canned and other sealed beverages
- GB/T 11377-1989 Metallic and other non-organic coatings--General rules for corrosion tests applicable for storage conditions
- GB/T 11377-2005 Metallic and other inorganic coatings.Genenal rules for corrosion tests applicable for storage conditions
- GB/T 21298-2007 Laboratory glassware.Text tubes
- GB/T 11606.11-1989 The method of environmental test for analytical instruments--Sand and dust content of the air test
- GB/T 11606.12-1989 The method of environmental test for analytical instruments--Mould growth test
- GB/T 11606.13-1989 The method of environmental test for analytical instruments--Salt mist test
- GB/T 11606.16-1989 The method of environmental test for analytical instruments--Fall down test
- GB/T 11606.17-1989 The method of environmental test for analytical instruments--Pump test
- GB/T 11606.3-1989 The method of environmental test for analytical instruments--Cold test
- GB/T 11606.4-1989 The method of environmental test for analysical instruments--High temperature test
- GB/T 11606.9-1989 The method of environmental test for analytical instruments--Magnetic field test
- GB/T 11606.10-1989 The method of environmental test for analytical instruments--Low air pressure test
- GB/T 11606.8-1989 The method of environmental test for analytical instruments--Vibration test
- GB/T 21997.1-2008 Instrument for soil test.Liquid limit device.Part 1: Casagrande liquid limit device
- GB/T 11606-2007 Methods of environmental test for analytical instruments
- GB/T 6587.4-1986 Vibration tests for electronic measuring instruments
- GB/T 6587.5-1986 Shock tests for electronic measuring instruments
- GB/T 6587.6-1986 Transportation tests for electronic measuring instruments
- GB/T 6587.2-1986 Temperature tests for electronic measuring instruments
- GB/T 6587.3-1986 Humidity tests for electronic measuring instruments
- GB/T 21997.2-2008 Instrument for soil test.Liquid limit device.Part 2: Fall cone liquid limit device
- GB/T 4935.1-2008 Instrument for soil test.Oedometer.Part 1:Single level arm oedometer
- GB/T 4935.2-2009 Instrument for soil test.Oedometer.Part 2:Pneumatic oedometer
- GB/T 11606.14-1989 The method of environmental test for analytical insturments--Cold storage test
- GB/T 11606.15-1989 The method of environmental test for analytical instruments--High temperature storage test
- GB/T 11606.6-1989 The method of environmental test for analytical instruments--Damp heat, steady state
- GB/T 11606.7-1989 The method of environmental test for analytical instruments--Damp heat, cyclic
- GB/T 11606.5-1989 The method of environmental test for analytical instruments--Change of temperature test
- GB/T 31228-2014 Instrumented nanoindentation test.Terminology
- GB/T 11463-1989 Reliability test for electronic measuring instruments
- GB 11463-1989 Electronic Measuring Instrument Reliability Testing
- GB 6579-1986 Laboratory glassware－Methods for thermal shock test
- GB/T 6579-1986 Laboratory glassware--Methods for thermal shock test
- GB/T 21043-2007 Instrument for soil test.Strain-controlled unconfined compression apparatus
- GB/T 4934.1-2008 Instrument for soil test.Shear apparatus.Part 1: Strain-controlled direct shear apparatus
- GB/T 4934.2-2008 Instrument for soil test.Shear apparatus.Part 2: Field vane shear apparatus
- GB/T 24107.1-2009 Instrument for soil test.Triaxial apparatus.Part 1:Strain controlled triaxial apparatus
- GB/T 13606-2007 Instrument for geotechnical engineering.General specifications of vibrating wire sensor
- GB/T 8993-1998 Environmental conditions and testing procedures for nuclear instrumentation
- GB/T 6587.1-1986 Environmental tests program for electronic measuring instruments
- GB/T 6587.7-1986 Basic safety tests for electronic measuring instruments
- GB/T 11606.1-1989 The method of environmental test for analytical instruments--General
- GB/T 42413-2023 Test method for resistance to freezing of glassware and glass containers
- GB/T 22458-2008 General rules of instrumented nanoindentation test
- GB/T 25480-2010 Basic environmental conditions and testing methods for transportation and storage of instruments
- GB/T 11606.2-1989 The method of environmental test for analytical instruments--Line frequency and voltage test
- GB/T 12085.1-1989 Optics and optical instruments--Environmental test methods--Definitions extent of testing
SAE - SAE International, Other test equipment
- SAE J211-2004 INSTRUMENTATION FOR IMPACT TEST (PDF IS NOT AVAILABLE)
- SAE J211/2-1995 Instrumentation for Impact Test—Part 2: Photographic Instrumentation
- SAE J977-1966 INSTRUMENTATION FOR LABATORY IMPACT TESTS
- SAE J211-1-2007 Instrumentation for Impact Test Part 1 Electronic Instrumentation
- SAE J211-1-1995 Instrumentation for Impact Test Part 1 Electronic Instrumentation
Professional Standard - Machinery, Other test equipment
- JB/T 7439.2-1994 Terminology relating to laboratory instruments - Dynamic test instrument
- JB/T 6214-1992 Guideline for reliability validation test and determination test (exponential distribution) for instrumentation
- JB/T 6214-2014 Guideline for reliability validation test and determination test (exponential distribution) for instrumentation
- JB/T 4279.3-1994 Enamelled winding wire test equipment and equipment verification method elongation tester
- JB/T 4279.6-1994 Enamelled winding wire test equipment equipment verification method peeling tester
- JB/T 4279.4-1994 Enamelled winding wire test equipment and equipment verification method springback angle tester
- JB/T 4279.5-1994 Enamelled winding wire test equipment verification method emergency pull-off tester
- JB/T 4279.10-1994 Enamelled winding wire test equipment verification method solvent resistance tester
- JB/T 4279.8-1994 Enamelled winding wire test equipment and equipment verification method softening breakdown tester
- JB/T 4279.9-1994 Enamelled winding wire test equipment verification method One-way paint scraping tester
- JB/T 4279.11-1994 Enamelled winding wire test equipment equipment verification method breakdown voltage tester
- JB/T 7406.2-1994 Testing machine terminology - Non-destructive test instrument
- JB/T 7083-1993 Impulse voltage testing instruments for low voltage apparatus
- JB/T 7083-2013 Impulse-voltage tester for low-voltage electrical installations
- JB/T 4279.3-2008 Verification procedure for test equipment of enamelled winding wire.Part 3:Elongation tester
- JB/T 4279.6-2008 Verification procedure for test equipment of enamelled winding wire.Part 6:Peeling tester
- JB/T 4279.14-2008 Verificafion procedure for test equipment of enamelled winding wire.Part 14: Solderability tester
- JB/T 4279.4-2008 Verification procedure for test equipment of enamelled winding wire.Part 4:Springness tester
- JB/T 4279.5-2008 Verification procedure for test equipment of enamelled winding wire.Part 5:Jerk tester
- JB/T 4279.10-2008 Verification procedure for test equipment of enamelled winding wire.Part 10:Tester for resistance to solvents
- JB/T 4279.13-1994 Enamelled winding wire test equipment and equipment verification method High-voltage paint film continuity tester
- JB/T 4279.12-1994 Enamelled winding wire test equipment and equipment verification method Low-voltage paint film continuity tester
- JB/T 7439.3-1994 Terminology relating to laboratory instruments - Climatic and environmental test equipment
- JB/T 4279.8-2008 Verification procedure for test equipment of enamelled winding wire.Part 8:Cut-through tester
- JB/T 4279.9-2008 Verification procedure for test equipment of enamelled winding wire.Part 9:Unidirectional scraping tester
- JB/T 4279.11-2008 Verification procedure for test equipment of enamelled winding wire.Part 11:Breakdown voltage tester
- JB/T 4279.15-2008 Verificafion procedure for test equipment of enamelled winding wire.Part 15: To-and-fro scraping tester
- JB/T 4279.16-2008 Verificafion procedure for test equipment of enamelled winding wire.Part 16: Static friction coefficient tester
- JB/T 4279.17-2008 Verificafion procedure for test equipment of enamelled winding wire.Part 17: Dynamic friction coefficient tester
- JB/T 7079-1993 Spring Driven Shock Tester and Its Calibration
- JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification
European Committee for Standardization (CEN), Other test equipment
- EN 12390-1:2012 Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds
- EN 12390-1:2021 Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds
- EN ISO 12867:2010 Ophthalmic instruments - Trial frames (ISO 12867:2010)
- EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021)
- EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
- EN ISO 12867:1998 Ophthalmic Instruments - Trial Frames ISO 12867:1998
- EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15)
- EN 1528-4:1996 Fatty food - Determination of pesticides and polychlorinated biphenyls (PCBs) - Part 4: Determination, confirmatory tests, miscellaneous
- EN ISO 15004:1997 Ophthalmic Instruments - Fundamental Requirements and Test Methods ISO 15004:1997
- EN ISO 9073-10:2004 Textiles - Test methods for nonwovens - Part 10: Lint and other particles generation in the dry state
- EN ISO 3262-3:1998 Extenders for Paints - Specifications and Methods of Test - Part 3: Blanc Fixe Together with the Other Parts of BSISO 3262-3:1998
International Organization for Standardization (ISO), Other test equipment
- ISO 12867:1998 Ophthalmic instruments - Trial frames
- ISO 3613:2010 Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
- ISO 3613:2021 Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
- ISO 14556 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
- ISO 1775:1975 Porcelain laboratory apparatus; Requirements and methods of test
- ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
- ISO 1125:1999/Amd 1:2011 Rubber compounding ingredients - Carbon black - Determination of ash - Amendment 1: Insertion of additional item in test report
- ISO 14556:2000 Steel - Charpy V-notch pendulum impact test - Instrumented test method
- ISO 30013:2011 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties
- ISO 17123-7:2005 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 7: Optical plumbing instruments
KR-KS, Other test equipment
- KS P ISO 12867-2021 Ophthalmic instruments — Trial frames
- KS P ISO 9801-2021 Ophthalmic instruments — Trial case lenses
- KS C IEC 60811-412-2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
- KS C IEC 61083-1-2022 Instruments and software used for measurements in high-voltage and high-current tests — Part 1: Requirements for instruments for impulse tests
- KS C IEC 60811-410-2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 410: Miscellaneous tests ― Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
未注明发布机构, Other test equipment
Group Standards of the People's Republic of China, Other test equipment
- T/ZZB 1079-2019 Xenon-arc sources aging resistance tester for plastics and their products
- T/CEC 358-2020 Test Instrument Data Transmission Protocol
- T/CQBSXY 1027-2023 Fur Test for colour fastness Change in colour for determination of grey scale rating（Instrumental assessment）
Professional Standard - Nuclear Industry, Other test equipment
Canadian General Standards Board （CGSB), Other test equipment
American Gear Manufacturers Association, Other test equipment
- AGMA 931-A02-2002 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
Military Standard of the People's Republic of China-General Armament Department, Other test equipment
- GJB 570.13-1988 Meteorological instrument final test method cloud meter
- GJB 570.14-1988 Typical test methods for meteorological instruments Radiosonde
- GJB 570.2-1988 Meteorological instrument final test method complete machine test
- GJB 570.5-1988 Meteorological instrument final test method environmental test
- GJB 3288-1998 Military optical instrument test methods
- GJB 570.6-1988 Meteorological instrument finalization test method reliability test
- GJB 595.3-1988 Environmental test methods for artillery optical instruments - low temperature test
- GJB 595.5-1988 Environmental test methods for artillery optical instruments - damp heat test
- GJB 595.2-1988 Environmental test methods for artillery optical instruments High temperature test
- GJB 595.7-1988 Environmental testing methods for artillery optical instruments Impact testing
- GJB 595.9-1988 Environmental test methods for artillery optical instruments rain test
- GJB 595.6-1988 Environmental test methods for artillery optical instruments Vibration test
- GJB 6368-2008 Approval test procedure for military observation and sight instrument
- GJB 570.1-1988 General Principles of Typical Test Methods for Meteorological Instruments
- GJB 595.4-1988 Environmental test methods for artillery optical instruments Temperature shock test
- GJB 349.46-1992 Conventional Weapons Finalization Test Methods Low-Light Night Vision Instruments
- GJB 2236-1994 Observation and aiming instrument accuracy test methods
机械工业部, Other test equipment
- JB/T 56214-1992 Guidelines for instrument reliability verification tests and measurement tests (exponential distribution)
CZ-CSN, Other test equipment
American National Standards Institute （ANSI), Other test equipment
- ANSI N323A-1997 Radiation Protection Instrumentation Test and Calibration - Portable Survey Instruments
- ANSI N323A/B-2013 Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
- ANSI/ASTM E1740:2010 Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
Lithuanian Standards Office , Other test equipment
AENOR, Other test equipment
- UNE-EN ISO 12867:2010 Ophthalmic instruments - Trial frames (ISO 12867:2010)
- UNE-EN 61083-1:2002 Instruments and software used for measurement in high-voltage impulse tests -- Part 1: Requirements for instruments.
Professional Standard - Ocean, Other test equipment
- HY/T 141-2011 Specification for sea test of oceanographic instruments
- HY 016.10-1992 Basic environmental test methods for marine instruments mold growth test
- HY 016.11-1992 Basic environmental test methods for marine instruments Vibration test
- HY 016.12-1992 Basic environmental test methods for marine instruments Shock test
- HY 016.2-1992 Low temperature test for basic environmental test methods for marine instruments
- HY 016.4-1992 High temperature test for basic environmental test methods for marine instruments
- HY 21.3-1992 The basic method of environmental test for oceanographic instruments - Guideline for damp/heat test
- HY 21.5-1992 The basic method of environmental test for oceanographic instruments - Guideline for mould test
- HY 21.6-1992 The basic method of environmental test for oceanographic instruments - Guideline for salt fog test
- HY 21.7-1992 The basic method of environmental test for oceanographic instruments - Guideline for vibration test
- HY 21.8-1992 The basic method of environmental test for oceanographic instruments - Guideline for shock test
- HY 016.13-1992 Basic environmental test methods for marine instruments Continuous shock test
- HY 016.15-1992 Basic environmental test methods for marine instruments Hydrostatic pressure test
- HY 016.3-1992 Basic environmental test methods for marine instruments Low temperature storage test
- HY 016.5-1992 Basic environmental test methods for marine instruments High temperature storage test
- HY 016.6-1992 High temperature change test of basic environmental test methods for marine instruments
- HY 016.7-1992 Guidelines for vibration tests of basic environmental test methods for marine instruments
- HY 016.8-1992 Guidelines for Shock Tests of Basic Environmental Test Methods for Oceanographic Instruments
- HY 016.14-1992 Basic environmental test methods for marine instruments Tilt and roll tests
- HY 21.11-1992 The basic method of environmental test for oceanographic instruments - Guideline for hydrostatic pressure test
- HY 21.1-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature test
- HY 21.4-1992 The basic method of environmental test for oceanographic instruments - Guideline for temperature variation test
- HY 21.9-1992 The basic method of environmental test for oceanographic instruments - Guideline for bump test
Professional Standard - Hydroelectric Power, Other test equipment
- SD 106-1982 Series Spectrum of Geotechnical Testing Instruments
Institute of Electrical and Electronics Engineers (IEEE), Other test equipment
- IEEE N323A-1997 Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
- IEEE N323A/COR-2004 Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
Standard Association of Australia （SAA）, Other test equipment
- AS 61083.1:2006 Instruments and software used for measurement in high-voltage impulse tests - Requirements for instruments
- AS 1961.2:2004 Castors and wheels - Test methods and apparatus
Professional Standard - Urban Construction, Other test equipment
AR-IRAM, Other test equipment
HU-MSZT, Other test equipment
Professional Standard - Radio Television Film, Other test equipment
- GY/T 27-1984 Configuration of testing apparatus for television video channels and their technical requirements
ES-AENOR, Other test equipment
CU-NC, Other test equipment
- NC 57-62-1986 Reciplents, Instruments and Laboratory Utenslls. Laboratory Glassware. Selection
International Electrotechnical Commission (IEC), Other test equipment
- IEC 61083-1:2021 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests
- IEC 61558-2-23:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites
- IEC 61083-1:2001 Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments
TR-TSE, Other test equipment
- TS 784-1969 METHODS FOR THERMAL SHOCK TESTS ON LABORATORY GLASSWARE
Danish Standards Foundation, Other test equipment
- DS/EN 60051-9+A1,2:1996 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 9: Recommended test methods
- DS 1103.1:1976 Test methods for rigid flat sheets. Apparatus and general testing conditions
- DS/EN 61083-1:2002 Instruments and software used for measurements in high-voltage impulse tests - Part 1: Requirements for instruments
- DS/EN ISO 14556:2000 Steel - Charpy V-notch pendulum impact test - Instrumented test method
European Committee for Electrotechnical Standardization（CENELEC）, Other test equipment
- EN IEC 60051-9:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 9: Recommended test methods
- HD 495 S1-1988 Spring-Operated Impact- Test Apparatus and its Calibration
- EN 61189-2:2006 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2: Test methods for materials for interconnection structures
- EN 61189-3:2008 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)
Defense Logistics Agency, Other test equipment
Professional Standard - Electricity, Other test equipment
- DL/T 1681-2016 Guidelines for Selection and Matching of High Voltage Test Instruments and Equipment
Professional Standard - Military and Civilian Products, Other test equipment
- WJ 743-1994 Stress test method for adhesives used in optical instruments
- WJ 746-1994 Impact test method for adhesives used in optical instruments
- WJ 747-1994 High temperature test method for adhesives used in optical instruments
- WJ 748-1994 Low temperature test method for adhesives used in optical instruments
- WJ 750-1994 Test method for shrinkage of glue for optical instruments
- WJ 741-1994 Test method for cleanliness of adhesives used in optical instruments
- WJ 742-1994 Test method for transmittance of glue used in optical instruments
- WJ 751-1994 Test method for solvent resistance of adhesives for optical instruments
工业和信息化部, Other test equipment
- JB/T 13810-2020 Instrumented Charpy Pendulum Impact Testing Machine
- WJ/T 746-2014 Impact test method for glue used in optical instruments
- WJ/T 747-2014 High temperature test method for glue used in optical instruments
- WJ/T 743-2014 Glue stress test method for optical instruments
- WJ/T 748-2014 Low temperature test method for glue used in optical instruments
- WJ/T 742-2014 Test method for transmittance of glue used in optical instruments
- WJ/T 751-2014 Test method for solvent resistance of glue for optical instruments
- WJ/T 741-2014 Test method for cleanliness of glue used in optical instruments
Professional Standard - Building Materials, Other test equipment
- JC/T 724-1996 Apparatus for physical test of cement.Electrically driven flexure testing device
- JC/T 724-1982 Apparatus for physical test of cement.Electrically driven flexure testing device
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Other test equipment
- GB/T 32065.4-2015 Environmental test methods for oceanographic instruments—Part 4：Dry heat
- GB/T 32065.2-2015 Environmental test methods for oceanographic instruments—Part 2：Cold
- GB/T 32065.7-2015 Environmental test methods for oceanographic instruments—Part 7：Damp heat, cyclic
- GB/T 32065.6-2015 Environmental test methods for oceanographic instruments—Part 6：Damp heat, steady state
- GB/T 32065.5-2015 Environmental test methods for oceanographic instruments—Part 5：Dry heat storage
- GB/T 32065.3-2015 Environmental test methods for oceanographic instruments—Part 3: Cold storage
国家市场监督管理总局、中国国家标准化管理委员会, Other test equipment
- GB/T 32065.14-2019 Environmental test methods for oceanographic instruments—Part 14 : Vibration test
- GB/T 32065.15-2019 Environmental test methods for oceanographic instruments—Part 15：Hydrostatic pressure test
- GB/T 32065.9-2019 Environmental test methods for oceanographic instruments—Part 9:Mould test
- GB/T 32065.10-2020 Environmental test methods for oceanographic instruments—Part 10：Salt fog test
- GB/T 32065.19-2020 Environmental test methods for oceanographic instruments—Part 19 : Immersion test
Professional Standard - Grain, Other test equipment
- LS/T 3706-2012 Test instrument of grain and oils.Technical requirements and test method for automatic titration analyzer
CENELEC - European Committee for Electrotechnical Standardization, Other test equipment
- EN 61083-1:1993 Digital recorders for measurements in high-voltage impulse tests Part 1: Requirements for digital recorders
- EN 61189-2:1997 Test Methods for Electrical Materials@ Printed Boards and Other Interconnection Structures and Assemblies - Part 2: Test Methods for Materials and Interconnection Structures (Incorporates Amendment A1: 2000; Incorporating Corrigendum August 1997)
- EN 61189-3:1997 Test Methods for Electrical Materials@ Interconnection Structures and Assemblies Part 3: Test Methods for Interconnection Structures (Printed Boards)
Professional Standard - Petroleum, Other test equipment
- SY/T 5420-1991 Basic environmental test methods for petroleum exploration and development instruments Test D: low temperature test
- SY/T 5218-1991 Basic environmental test methods for petroleum exploration and development instruments Test A: High temperature test
- SY/T 5221-1991 Basic environmental test methods for petroleum exploration and development instruments Test B: Shock test
- SY/T 5230-1991 Basic environmental test methods for petroleum exploration and development instruments Test C: Salt spray test
- SY/T 5584-1993 Basic environmental test methods for petroleum exploration and development instruments Test J: Sealing test
National Metrological Verification Regulations of the People's Republic of China, Other test equipment