ZH
RU
ES

Inaccurate measurement of standard materials

Inaccurate measurement of standard materials, Total:499 items.

In the international standard classification, Inaccurate measurement of standard materials involves: Air quality, Vocabularies, Analytical chemistry, Farm buildings, structures and installations, Tobacco, tobacco products and related equipment, Metrology and measurement in general, Water quality, Graphic technology, Soil quality. Pedology, Protection against fire, Lubricants, industrial oils and related products, Quality, Microbiology, Fuels, Organic chemicals, Products of the chemical industry, Physics. Chemistry, Pharmaceutics, Radiation measurements, Linear and angular measurements, Construction materials, Protection against electric shock, Petroleum products in general, Raw materials for rubber and plastics, Electromagnetic compatibility (EMC), Nuclear energy engineering, Textile fibres, Measurement of volume, mass, density, viscosity, Optics and optical measurements, Paint ingredients, Waxes, bituminous materials and other petroleum products, Crude petroleum, Sports equipment and facilities, Powder metallurgy, Domestic, commercial and industrial heating appliances, Pesticides and other agrochemicals, CHEMICAL TECHNOLOGY, Semi-manufactures of timber, Pipeline components and pipelines, Textile auxiliary materials, Electricity. Magnetism. Electrical and magnetic measurements, Environmental protection, Products of the textile industry, Ferrous metals, Earthworks. Excavations. Foundation construction. Underground works, Construction industry, Medical equipment, Geology. Meteorology. Hydrology, Testing of metals, Non-ferrous metals, Rubber, Road vehicle systems, Plastics, Paints and varnishes, Farming and forestry, Rubber and plastics products, Solar energy engineering, Insulating materials, Semiconducting materials, Wastes, Test conditions and procedures in general, Leather technology, Rotating machinery, Medical sciences and health care facilities in general, Surface treatment and coating, Materials for aerospace construction, Laboratory medicine, Kitchen equipment, Shipbuilding and marine structures in general, Energy and heat transfer engineering in general, Veterinary medicine, Printed circuits and boards, Natural gas, Refractories, Environmental testing, Occupational safety. Industrial hygiene.

American Society for Testing and Materials (ASTM), Inaccurate measurement of standard materials

ASTM D7440-23 Standard Practice for Characterizing Uncertainty in Air Quality Measurements
ASTM D7440-08(2015)e1 Standard Practice for Characterizing Uncertainty in Air Quality Measurements
ASTM D7440-08 Standard Practice for Characterizing Uncertainty in Air Quality Measurements
ASTM E1756-08(2020) Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-08(2015) Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-08 Standard Test Method for Determination of Total Solids in Biomass
ASTM E1721-01(2009) Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
ASTM E1721-01 Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
ASTM E1721-01(2020) Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
ASTM E1721-01(2015) Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
ASTM E2655-14(2020) Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM E1721-95 Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
ASTM D5907-03 Standard Test Method for Filterable and Nonfilterable Matter in Water
ASTM E2655-14 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM D6032-08 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
ASTM D6032-02 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
ASTM D6032/D6032M-17 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
ASTM E2536-21 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM E2536-14 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM E2536-15 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM E2536-15a Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM D4055-02 Standard Test Method for Pentane Insolubles by Membrane Filtration
ASTM D3180-12 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
ASTM D2109-96(2000) Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures
ASTM D2109-96(2000)e1 Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures
ASTM D2109-01 Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures
ASTM D2109-01(2006) Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures
ASTM D7366-08(2019) Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
ASTM E2536-09 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM D4095-97(2008) Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes
ASTM D4095-97(2014) Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter &40;Total Solids&41; in Floor Polishes
ASTM E2655-08 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM D8293-19 Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements
ASTM E2500-07(2012) Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment
ASTM ISO/ASTM51707-15 Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
ASTM D893-11 Standard Test Method for Insolubles in Used Lubricating Oils
ASTM D893-12 Standard Test Method for Insolubles in Used Lubricating Oils
ASTM ISO/ASTM 51707-15 Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
ASTM D3279-07 Standard Test Method for n-Heptane Insolubles
ASTM E2764-11 Standard Practice for Uncertainty Assessment in the Context of Seized-Drug Analysis
ASTM F1116-88(1995) Standard Test Method for Determining Dielectric Strength of Overshoe Footwear
ASTM F1116-21 Standard Test Method for Determining Dielectric Strength of Dielectric Footwear
ASTM F1116-14 Standard Test Method for Determining Dielectric Strength of Dielectric Footwear
ASTM D5553-95(2006) Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
ASTM D5553-95(2001) Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
ASTM D5553-95 Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
ASTM D7724-18(2023)e1 Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM)
ASTM D8293-22 Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements
ASTM D8104-17 Standard Guide for Determining Coating Qualification Test Data Applicability
ASTM D1113-13 Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool
ASTM D1113-90a(2008) Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool
ASTM C1005-19 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
ASTM C1005-18 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
ASTM C1005-05 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
ASTM D7724-11 Standard Test Method for Carbon BlackNon-Dispersible Matter by Mechanical Flushing (NDM)
ASTM E2867-14(2019) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM D7366-08(2013) Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
ASTM D7366-08 Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
ASTM E2867-14(2023) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM D5907-96a Standard Test Method for Filterable and Nonfilterable Matter in Water
ASTM D1065-18(2022) Standard Test Method for Unsaponifiable Matter in Pine Chemicals, Including Rosin, Tall Oil, and Related Products
ASTM E1755-95 Standard Test Method for Ash in Biomass
ASTM E1755-01(2015) Standard Test Method for Ash in Biomass
ASTM D4072-98(2003)e1 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
ASTM D6560-00(2005) Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
ASTM D6560-00 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
ASTM D4072-98 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
ASTM D4072-98(2008) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
ASTM D6560-12 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
ASTM D6560-22 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
ASTM D6560-17 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
ASTM D4072-98(2013) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
ASTM D5553-95(2019) Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
ASTM D7724-18e1 Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM)
ASTM D7724-18 Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM)
ASTM D7724-11(2016) Standard Test Method for Carbon Black&x2014;Non-Dispersible Matter by Mechanical Flushing (NDM)
ASTM D269-97(2002) Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
ASTM D269-97(2020) Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
ASTM D1113-90a(1995) Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool
ASTM D1113-90a(2001) Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool
ASTM F1722-96(2003) Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis
ASTM F1722-09 Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis
ASTM F1722-96 Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis
ASTM F1722-15(2021) Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis
ASTM D2109-01(2011) Standard Test Methods for Nonvolatile Matter in Halogenated Organic
Solvents and Their Admixtures
ASTM D2109-01(2006)e1 Standard Test Methods for Nonvolatile Matter in Halogenated Organic
Solvents and Their Admixtures
ASTM D2109-01(2016) Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures
ASTM D5907-18 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
ASTM E194-99 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
ASTM E194-10(2015) Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
ASTM E2779-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
ASTM D6301-98 Standard Practice for the Collection of Samples of Filterable and Nonfilterable Matter in Water
ASTM D6301-03 Standard Practice for the Collection of Samples of Filterable and Nonfilterable Matter in Water
ASTM D4139-04 Standard Guide for Determining Volatile and Nonvolatile Content of Pigments
ASTM D4139-04(2009) Standard Guide for Determining Volatile and Nonvolatile Content of Pigments
ASTM D4139-04(2014) Standard Guide for Determining Volatile and Nonvolatile Content of Pigments
ASTM E1755-01 Standard Test Method for Ash in Biomass
ASTM E1755-01(2007) Standard Test Method for Ash in Biomass
ASTM E1755-01(2020) Standard Test Method for Ash in Biomass
ASTM E1756-95 Standard Test Method for Determination of Total Solids in Biomass
ASTM E1756-01 Standard Test Method for Determination of Total Solids in Biomass
ASTM E2043-99(2021) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM E2043-99(2017) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM E2043-99(2012) Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry
ASTM D5055-05 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D5055-04 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D5055-03 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D5055-11a Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D5055-12 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D5055-13e1 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM F2331-11(2021) Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
ASTM E2554-18 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
ASTM E2554-18e1 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
ASTM E194-06 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
ASTM D5557-95(2017) Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
ASTM D3648-95 Standard Practices for the Measurement of Radioactivity
ASTM C650-20 Standard Test Method for Determination of Resistance to Chemical Substances
ASTM D4055-04(2019) Standard Test Method for Pentane Insolubles by Membrane Filtration
ASTM D5353-95(2019) Standard Test Method for Determination of Total Desulfated Fatty Matter
ASTM E1690-01 Standard Test Method for Determination of Ethanol Extractives in Biomass
ASTM E1690-95 Standard Test Method for Determination of Ethanol Extractives in Biomass
ASTM E1690-08 Standard Test Method for Determination of Ethanol Extractives in Biomass
ASTM D5055-16 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D7317-06 Standard Test Method for Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
ASTM D5907-13 Standard Test Methods for Filterable Matter lpar;Total Dissolved Solidsrpar; and Nonfilterable Matter lpar;Total Suspended Solidsrpar; in Water
ASTM D4751-20a Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D4751-20b Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D4751-20 Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM E2780-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
ASTM D6329-98(2008) Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
ASTM E2780-10 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
ASTM E1690-08(2021) Standard Test Method for Determination of Ethanol Extractives in Biomass
ASTM D5439-95 Standard Test Method for Determination of Sediment in Moellon
ASTM D5439-95(2001) Standard Test Method for Determination of Sediment in Moellon
ASTM D5439-95(2006) Standard Test Method for Determination of Sediment in Moellon
ASTM D4055-01 Standard Test Method for Pentane Insolubles by Membrane Filtration
ASTM D4055-97 Standard Test Method for Pentane Insolubles by Membrane Filtration
ASTM D4055-04 Standard Test Method for Pentane Insolubles by Membrane Filtration
ASTM D4055-04(2009) Standard Test Method for Pentane Insolubles by Membrane Filtration
ASTM D4055-04(2013) Standard Test Method for Pentane Insolubles by Membrane Filtration
ASTM C123/C123M-14 Standard Test Method for Lightweight Particles in Aggregate
ASTM E2515-07 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
ASTM D7626-19 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
ASTM E2515-11(2017) Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
ASTM D7626-19e1 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
ASTM E1369-02 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM F1839-01(2007) Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
ASTM F1839-01 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
ASTM F1839-08e1 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
ASTM G213-17(2023) Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
ASTM E255-91(1997) Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
ASTM E2558-08 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
ASTM E2558-13(2021) Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces
ASTM D5902-05(2010) Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
ASTM B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM E1369-07 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM E1369-07e1 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM E1369-07e2 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM D5055-07 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM D6478-08 Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
ASTM D6478-09 Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
ASTM D6478-00 Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
ASTM E1827-11(2017) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
ASTM D6478-10(2019) Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
ASTM D2764-20 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
ASTM D2764-99(2015)e1 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
ASTM C1005-17 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
ASTM D2504-67 Standard Method Of Test For Noncondensable Gases In C3 And Lighter Hydro-Carbon Products By Gas Chromatography
ASTM E1369-15(2020)e1 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM E1298-89(2000) Standard Guide for Determination of Purity, Impurities, and Contaminants in Biological Drug Products
ASTM E1298-89(1994) Standard Guide for Determination of Purity, Impurities, and Contaminants in Biological Drug Products
ASTM E1690-08(2016) Standard Test Method for Determination of Ethanol Extractives in Biomass
ASTM E1369-15 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM D4716-07 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D4716/D4716M-20 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM E2554-13 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
ASTM D1490-01(2006) Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
ASTM D1490-96e1 Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
ASTM D1490-01 Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
ASTM D2697-03 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D7367-19 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
ASTM D7367-19e2 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
ASTM D7367-19e1 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
ASTM D6479-15(2020) Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
ASTM D647-88a Standard test method for determining the wrinkle resistance of fabrics used in inflatable restraints
ASTM C1005-10 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
ASTM D3410/D3410M-03 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D3410/D3410M-95 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D3410/D3410M-16e1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM E973-10(2015) Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
ASTM E973-16(2020) Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
ASTM E973-16 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
ASTM D4872-14(2020) Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
ASTM D4571-06(2012) Standard Test Methods for Rubber Compounding Materialsmdash;Determination of Volatile Material
ASTM F1527-00 Standard Guide for Application of Silicon Standard Reference Materials and Reference Wafers for Calibration and Control of Instruments for Measuring Resistivity of Silicon
ASTM D6050-97(2003)e1 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-21 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-09 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97(2003) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-09(2016) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6842-02 Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making
ASTM D6842-02e1 Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making
ASTM D6842-02(2007) Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making
ASTM D5557-95 Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
ASTM D5557-95(2001) Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
ASTM D5557-95(2011) Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
ASTM D5557-95(2006) Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
ASTM D6617-00 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-05 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-08 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D4571-02 Standard Test Methods for Rubber Chemicals8212;Determination of Volatile Material
ASTM E1821-01 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM E1821-96 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM E1821-01(2007) Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM E1821-08 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM E1821-08(2015) Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM D2832-92(2011) Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
ASTM C1104/C1104M-95 Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
ASTM C1104/C1104M-00 Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
ASTM C1104/C1104M-19 Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
ASTM D6402-99(2009) Standard Test Method for Determing Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
ASTM D4678-15a(2019) Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM C1005-00 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
ASTM D5261-92(1996) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM G213-17 Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
ASTM D5560-95(2018) Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils
ASTM E2093-12(2016) Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM D6689-01(2019)e1 Standard Guide for Optimizing, Controlling, and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM D5261-10(2018) Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM E1288-89(1994) Standard Test Method for The Durability of Biomass Pellets (Withdrawn 2003)
ASTM D4359-90(2012) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM E1821-08(2020) Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
ASTM A1073/A1073M-12 Standard Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet
ASTM D1065-96 Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products
ASTM D2832-92(2005) Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
ASTM D3050-05e1 Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)
ASTM D3050-05 Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)
ASTM D3050-07(2015) Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)
ASTM D4571-21 Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material
ASTM C1375-00(2005) Standard Guide for Substrates Used in Testing Building Seals and Sealants
ASTM C1375-00 Standard Guide for Substrates Used in Testing Building Seals and Sealants
ASTM C1375-00(2009) Standard Guide for Substrates Used in Testing Building Seals and Sealants
ASTM D4571-22 Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material
ASTM E1758-01(2020) Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
ASTM D6402-99(2014) Standard Test Method for Determining Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
ASTM C1375-00(2014) Standard Guide for Substrates Used in Testing Building Seals and Sealants
ASTM E1758-95e1 Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
ASTM E1758-01 Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
ASTM E1758-01(2007) Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
ASTM E1758-01(2015) Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
ASTM D1353-02 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D1353-13 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D1353-03 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D1353-09 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM E1731-95(2001) Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
ASTM E1731-11(2018) Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
ASTM D4571-06(2017) Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material
ASTM D3180-07 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
ASTM D3180-15 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
ASTM D6502-08 Standard Test Method for Continuous Measurement of On-line Composite Samples of Low Level Filterable Matter (Suspended Solids) and Non-Filterable Matter (Ionic Solids) in Process Water by X-Ray Fluore
ASTM D6402-99(2020) Standard Test Method for Determining Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
ASTM A1073/A1073M-14 Standard Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet
ASTM D4281-95(2005)e1 Standard Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination
ASTM D4281-95(2001) Standard Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination
ASTM D4281-95 Standard Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination
ASTM D5560-95(2011) Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils
ASTM D4600-95(2016) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM F1500-98(2019) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
ASTM D1353-13(2021) Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D7979-19 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent, and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
ASTM D7979-20 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent, and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
ASTM E2852-13(2021) Standard Guide for Acquisition, Maintenance, Storage, and Use of Hazardous Material Detection Instrumentation
ASTM D7845-20 Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry
ASTM D7845-17 Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry
ASTM C1287-18 Standard Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry
ASTM D5502-00 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
ASTM D5502-00(2005) Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
ASTM D2504-88(2010) Standard Test Method for Noncondensable Gases in C₂ and Lighter Hydrocarbon Products by Gas Chromatography
ASTM D6691-09 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
ASTM D3171-06 Standard Test Methods for Constituent Content of Composite Materials
ASTM D3171-99 Standard Test Methods for Constituent Content of Composite Materials
ASTM D7873-22a Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)
ASTM D5560-95(2006) Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils
ASTM D5560-95 Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils
ASTM D5560-95(2001) Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils
ASTM E2385-11 Standard Guide for Estimating Wildlife Exposure Using Measures of Habitat Quality
ASTM E2852-13 Standard Guide for Acquisition, Maintenance, Storage, and Use of Hazardous Material Detection Instrumentation
ASTM B885-09(2020) Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
ASTM D5553-95(2012) Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
ASTM D7873-22 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)
ASTM D7280-15 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
ASTM D4746-20 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
ASTM F2459-12 Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis
ASTM D7626-10 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
ASTM D6831-02 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D5902-05 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
ASTM D5902-05e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
ASTM E1195-01(2008) Standard Test Method for Determining a Sorption Constant (K_oc) for an Organic Chemical in Soil and Sediments
ASTM C1005-20 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements
ASTM D6029-96 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
ASTM D6029-17 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
ASTM G156-97 Standard Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test
ASTM D7873-20 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)
ASTM D8108-21 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D8108-20 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D2697-03(2021) Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D4600-95(2005) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D4600-95(2010) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
ASTM D1490-01(2013) Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
ASTM E918-83(2011) Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure

未注明发布机构, Inaccurate measurement of standard materials

JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles

International Organization for Standardization (ISO), Inaccurate measurement of standard materials

ISO GUIDE 30:1992/Amd 1:2008 Terms and definitions used in connection with reference materials Amendment 1 Revision of definitions for reference material and certified reference material
ISO 29201:2012 Water quality - The variability of test results and the uncertainty of measurement of microbiological enumeration methods
ISO/TS 15530-3:2004 Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards
ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
ISO/TR 24697:2011 Textiles and textile products - Guidelines on the determination of the precision of a standard test method by interlaboratory trials
ISO 21253-2:2019 Water quality — Multi-compound class methods — Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method
ISO 6974-1:2012/cor 1:2012 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition; Technical Corrigendum 1

TR-TSE, Inaccurate measurement of standard materials

TS 127-1964 STANDARD METHODS OF TEST FOR BENZENE-INSOLUABLE MATTER ?N CREOSOTE

Association of German Mechanical Engineers, Inaccurate measurement of standard materials

VDI 2449 Blatt 3-2001 Measurement methods test criteria - General method for the determination of the uncertainty of calibratable measurement methods
VDI/VDE 2629 Blatt 2-2012 Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces
VDI 3957 Blatt 3-2008 Biological measuring procedures to determine and assess effects of air pollutants on plants (bioindication) - Procedure for standardised exposure of curly kale
VDI 4206 Blatt 2-2015 Performance criteria and test procedures for measuring devices for monitoring emissions at small firing installations - Measuring devices for the determination of particulate emissions
VDI 4206 Blatt 2-2011 Performance criteria and test procedures for measuring devices for monitoring emissions at small firing installations - Measuring devices for the determination of particulate emissions
VDI 3957 Blatt 13 Berichtigung-2007 Biological measurement procedures for determining and evaluating the effects of ambient air pollutants by means of lichens (bioindication) - Mapping the diversity of epiphytic lichens as an indicator of air quality - Corrigendum concerning guideline VDI 3
VDI 3957 Blatt 13-2005 Biological measurement procedures for determining and evaluating the effects of ambient air pollutants by means of lichens (bioindication) - Mapping the diversity of epiphytic lichens as an indicator of air quality

National Metrological Technical Specifications of the People's Republic of China, Inaccurate measurement of standard materials

JJF(铁道) 602-2004 Uncertainty in Measurement for Special Measuring Standards of Railway
JJF(烟草)2.1-2008 Evaluation of Uncertainty in Measurment for Parameter of Physical Characteristics of Cigarettes—Part 1:Mass
JJF(烟草) 2.1-2008 Guidelines for the Evaluation of Uncertainty in Measurement of Physical Indexes of Cigarettes - Part 1 Quality

Military Standard of the People's Republic of China-General Armament Department, Inaccurate measurement of standard materials

GJB 1485-1992 Precision, accuracy and uncertainty of material physical property testing methods

Korean Agency for Technology and Standards (KATS), Inaccurate measurement of standard materials

KS I ISO 14956:2008 Air quality－Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
KS X ISO 15790-2005(2020) Graphic technology and photography－Certified reference materials for reflection and transmission metrology－Documentation and procedures for use, including determination of combined standard uncertaint
KS M 2415-2006(2016) Standard test method for n-heptane insolubles
KS B ISO 15530-3:2020 Geometrical product specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards
KS C CISPR TR 16-4-1-2012 Specification for radio disturbance and immunity measuring apparatus and methods－Part 4-1：Uncertainties, statistics and limit modelling－Uncertainties in standardized EMC tests
KS B ISO 15530-3:2005 Geometrical Product Specifications(GPS)-Coordinate measuring machines(CMM):Technique for determining the uncertainty of measurement-Part 3:Use of calibrated workpieces or standards
KS B ISO 15530-3:2014 Geometrical Product Specifications(GPS)-Coordinate measuring machines(CMM):Technique for determining the uncertainty of measurement-Part 3:Use of calibrated workpieces or standards
KS B ISO 15530-3:2015 Geometrical Product Specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or standards
KS C CISPR TR 16-4-1-2012(2017) Specification for radio disturbance and immunity measuring apparatus and methods－Part 4-1：Uncertainties, statistics and limit modelling－Uncertainties in standardized EMC tests
KS C CISPR TR 16-4-1-2012(2022) Specification for radio disturbance and immunity measuring apparatus and methods－Part 4-1：Uncertainties, statistics and limit modelling－Uncertainties in standardized EMC tests
KS C IEC 60034-2-1:2019 Rotating electrical machines — Part 2-1: Standard methods for determining losses and efficiency from tests(excluding machines for traction vehicles)
KS P 1015-2012 Establishment of a reference material and evaluation method for troponin-based cardiovascular diagnostics

American Gear Manufacturers Association, Inaccurate measurement of standard materials

AGMA 99FTM3-1999 Measurement Uncertainty for Pitch and Runout Artifacts

GOSTR, Inaccurate measurement of standard materials

GOST R 8.980-2019 State system for ensuring the uniformity of measurements. Standard reference data. The critical temperatures and critical pressures of thermo unstable substances
GOST R 8.976-2019 State system for ensuring the uniformity of measurements. Certified reference materials of composition of gas mixtures. General specifications
GOST R 8.985-2020 State system for ensuring the uniformity of measurements. State service of standard reference data on physical constants and properties of substances and materials. Standard Reference Data for Atomic Energy Service. Basic principles
GOST IEC 60034-2-1-2017 Rotating electrical machines. Part 2-1. Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
GOST R 58484-2019 Non-active surgical implants. Implants based on hyaluronic acid. Standard guide to determining characteristics and conducting trials of hyaluronic acid, as an incipient basis for medical devices
GOST R 8.967-2019 State system for ensuring the uniformity of measurements. Transfer units of time, frequency and time scale national UTC(SU) from the State primary standard of the Russian Federation with the use of the GLONASS system. Classification. Measurement uncertain

Association Francaise de Normalisation, Inaccurate measurement of standard materials

FD X43-070-6:2019 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 6 : estimation of the uncertainties on mass concentrations of particulate matters measured automatically
NF EN ISO 15530-3:2011 Spécification géométrique des produits (GPS) - Machines à mesurer tridimensionnelles (MMT) : Technique pour la détermination de l'incertitude de mesure - Partie 3 : utilisation de pièces étalonnées ou d'étalons de mesure
NF E11-160-3*NF EN ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): technique for determining the uncertainty of measurement - Part 3 : use of calibrated workpieces or measurement standards
FD X43-070-7:2011 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 7 : estimation of the uncertainties on measurements of benzo[a]pyrene conducted in situ on PM10 fraction
FD S99-132:2000 Methodology for identification of quality and construction criteria, introduction and monitoring of indicators for health establishments
FD X43-070-8:2011 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 8 : estimation of the uncertainties on measurements of Pb, Cd, As and Ni conducted in situ in the PM10 fraction
FD X43-070-2:2015 Air quality - Practical guidance for estimating the uncertainty of measurement of pollutant concentration in ambient air - Part 2 : estimation of the uncertainties associated with the automated measurements of SO2, NO, NOx, NO2, O3 and CO carried out on s
NF T90-350:2004 Water quality - Determination of the standardized global biological index.
FD A06-500*FD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
FD X43-070-4:2008 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 4 : estimation of the uncertainties on on-site diffusion tube measurements of nitrogen dioxide, followed by a laboratory spectro
FD X43-070-3:2008 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 3 : Estimation of the uncertainties on measurements of benzene conducted in situ by diffusion tube followed by a thermal desorpt
FD T90-465-2:2019 Water quality - Protocol for the estimation of the uncertainty of measurement associated with an analysis result for microbiological enumeration methods - Part 2 : technical enumeration
NF X43-352*NF EN 15853:2010 Ambient air quality - Standard method for the determination of mercury deposition
NF EN ISO 3759:2011 Textiles - Préparation, marquage et mesurage des éprouvettes d'étoffe et des vêtements dans les essais de détermination de la variation des dimensions
FD X07-021:1999 Fundamental standards - Metrology and application of the statistics - Help to the process for the estimation and the use of the measurement and test results uncertainty
FD T90-465-1:2014 Water quality - Protocol for the estimation of the uncertainty of measurement associated with an analysis result for microbiological enumeration methods - Part 1 : references, definition and general principles
FD X43-070-5:2008 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 5 : Estimation of the uncertainties on measurements of benzene conducted in situ by pumping followed by a thermal desorption and
NF EN 15841:2010 Qualité de l'air ambiant - Méthode normalisée pour la détermination des dépôts d'arsenic, de cadmium, de nickel et de plomb
NF X43-026*NF EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter.
NF X43-372*NF EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
NF EN 14791:2017 Émissions de sources fixes - Détermination de la concentration massique des oxydes de soufre - Méthode de référence normalisée
NF T90-253-2*NF EN ISO 21253-2:2019 Water quality - Multi-compound class methods - Part 2 : criteria for the quantitative determination of organic substances using a multi-compound class analytical method
GA T90-374:2006 Water quality - Application guide for NF T 90-350:2004 (Determination of the standardized global biological index)
NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
NF EN 599-2:2016 Durabilité du bois et des matériaux dérivés du bois - Efficacité des produits préventifs de préservation du bois établie par des essais biologiques - Partie 2 : étiquetage

RU-GOST R, Inaccurate measurement of standard materials

GOST R 8.913-2016 State system for ensuring the uniformity of measurements. Satellite laser ranging systems. Accuracy and measurement uncertainty. Standardized metrological characteristics
GOST 32673-2014 Regulations for establishing environmental standards and atmosphere emission control procedures for odorous substances
GOST R 55919-2013 Regulations for establishing environmental standards and atmosphere emission control procedures for odorous substances
GOST R 8.926-2016 State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with halocarbons. Procedure of determining the metrological characteristics
GOST R 8.918-2016 State system for ensuring the uniformity of measurements. Reference materials refinery gases. General metrological and technical requirements
GOST R 8.919-2016 State system for ensuring the uniformity of measurements. Reference systems for certification reference materials composition of magistral natural gas and substitute natural gas. The method of verification
GOST R 8.921-2016 State system for ensuring the uniformity of measurements. Certified reference materials of natural gas magistral and substitute natural gas. Procedure of determining the metrological characteristics
GOST R 8.925-2016 State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Hydrogen, Nitrogen, Oxygen, Carbon Oxide, Carbon Dioxide, Methane, Propane, Hexane. Procedure of determining the metrological characteristics
GOST 33577-2015 Activated carbon. Standard test method for determination of water-soluble substances content
GOST R 8.920-2016 State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Nitrogen oxide, Nitrogen dioxide, Hydrogen sulfide, Sulfur dioxide, Ammonia. Procedure of determining the metrological characteristics
GOST 33576-2015 Activated carbon. Standard test method for determining acid extractable substances content
GOST R ISO 4967-2009 Steel. Determination of content of nonmetallic inclusions. Micrographic method using standard diagrams
GOST R 8.735.1-2014 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in liquid and solid substances and materials. Transfer of the units from the State Primary Standard based on coulomet

British Standards Institution (BSI), Inaccurate measurement of standard materials

BS DD 260:2003 Water quality - Enumeration of micro-organisms in water samples - Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement
BS ISO 15790:2005 Graphic technology and photography - Certified reference materials for reflection and transmission metrology - Documentation and procedures for use, including determination of combined standard uncertainty
PD CISPR/TR 16-4-1:2009 Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Uncertainties in standardized EMC tests
BS 8496:2007 Water quality - Enumeration of micro-organisms in water samples - Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement
BS ISO 13752:1998 Air quality - Assessment of uncertainty of a measurement method under field conditions using a second method as reference
BS EN ISO 15530-3:2011 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Use of calibrated workpieces or measurement standards
BS EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
BS EN 14907:2005(2010) Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
BS EN 14184:2003 Water quality - Guidance standard for the surveying of aquatic macrophytes in running waters
BS EN ISO 21253-2:2019 Water quality. Multi-compound class methods - Criteria for the quantitative determination of organic substances using a multi-compound class analytical method
BS EN 12287:1999 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Description of reference materials
PD CEN/TR 10317:2020 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products
BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

Danish Standards Foundation, Inaccurate measurement of standard materials

DS/EN ISO 15530-3:2012 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials

German Institute for Standardization, Inaccurate measurement of standard materials

DIN EN ISO 15530-3:2018-09 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011); German version EN 15530-3:2011
DIN EN ISO 15530-3:2018 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
DIN SPEC 1168:2010 Air quality - Approach to uncertainty estimation for ambient air reference measurement methods; German version CR 14377:2002
DIN ISO/TS 15530-3:2008 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards (ISO/TS 15530-3:2004); German version CEN ISO/TS 15530-3:2007
DIN EN ISO 15530-3:2012 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011); German version EN 15530-3:2011
DIN EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter; English version of DIN EN 14907
DIN EN ISO 21253-2:2022-12 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019); German version EN ISO 21253-2:2019
DIN EN 14128:2020-06 Durability of wood and wood-based products - Efficacy criteria for curative wood preservatives as determined by biological tests; German version EN 14128:2020
DIN EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; English version of DIN EN 14902
DIN EN 14791:2017-05 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method; German version EN 14791:2017
DIN 38409-10:1980-07 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by mass concentration in water and waste water (H10)

BE-NBN, Inaccurate measurement of standard materials

NBN T 03-238-1980 Sodium and potassium silicates for industrial use - Preparation of solution of products not easily sOluble in boiling water and determination of matter insoluble in water
NBN T 03-349-1981 Crude sodium borates for industrial use - Determination of matter insoluble in alkaline medium and preparation of test solutions
NBN T 03-161-1980 Sodium chloride for industrial use - Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations

American National Standards Institute （ANSI), Inaccurate measurement of standard materials

ANSI/IEEE C63.23:2012 Standard Guide for Electromagnetic Compatibility - Computations and Treatment of Measurement Uncertainty
ASTM D1644-01(2023) Standard Test Methods for Nonvolatile Content of Varnishes
ANSI/ASA S2.21-1998 Standard Method for Preparation of a Standard Material for Dynamic Mechanical Measurements

KR-KS, Inaccurate measurement of standard materials

KS B ISO 15530-3-2020 Geometrical product specifications(GPS) — Coordinate measuring machines(CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards
KS C IEC 60034-2-1-2019 Rotating electrical machines — Part 2-1: Standard methods for determining losses and efficiency from tests(excluding machines for traction vehicles)

American Society of Mechanical Engineers (ASME), Inaccurate measurement of standard materials

ASME B89.7.1 TECH RPT-2016 Guidelines for Addressing Measurement Uncertainty in the Development and Application of ASME B89 Standards
ASME B89.7.1-2016 Guidelines for Addressing Measurement Uncertainty in the Development and Application of ASME B89 Standards

Lithuanian Standards Office , Inaccurate measurement of standard materials

LST EN ISO 15530-3:2012 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
LST EN 14907-2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
LST EN 60034-2-1-2008 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) (IEC 60034-2-1:2007)
LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

Standard Association of Australia （SAA）, Inaccurate measurement of standard materials

AS/NZS CISPR 16.4.1:2012
ASCRM 002-2-1999 Certified reference material - Float glass - For use in determining abradability index by AS 1774.23.2
ASCRM 002-1-1997 Certified reference material - Float glass - For use in determining abradability index by AS 1774.23.1

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Inaccurate measurement of standard materials

GB/T 24635.3-2009 Geometrical Product Specification(GPS)-Coordinate measuring machines(CMM):Technique for determining the uncertainty of measurement-Part 3: Use of calibrated workpieces or standards
GB/Z 6113.401-2007 Specification for radio disturbance and immunity measuring apparatus and methods.Part 4-1:Uncertainties,statistics and limit modelling.Uncertainties in standardized EMC tests
GB/Z 6113.401-2018 Specification for radio disturbance and immunity measuring apparatus and methods.Part 4-1:Uncertainties,statistics and limit modelling.Uncertainties in standardized EMC tests
GB 14883.2-2016 National food safety standard Determination of radioactive substance hydrogen-3 in food
GB 14883.8-2016 Determination of Radioactive Substances Plutonium-239 and Plutonium-240 in National Food Safety Standard Food
GB/T 31253-2014 Natural gas.Validation for gaseous reference materials.Direct measurement of calorific value and density

VN-TCVN, Inaccurate measurement of standard materials

TCVN 3750-2016 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

CU-NC, Inaccurate measurement of standard materials

NC 00-37-1987 National System for Standardiza- tion, Metrology and Quality Control. Guide for the Elabora- tion of Precisión Measurement Standards
NC 96-00-05-1989 Standards System for Fire Protection. Determination of Combustibility of Solid Materials and Substances. Testing Methods

Institute of Electrical and Electronics Engineers (IEEE), Inaccurate measurement of standard materials

ANSI C63.23-2012 American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty
IEEE Std C63.23-2012 American National Standard Guide for Electromagnetic Compatibility - Computations and Treatment of Measurement Uncertainty

European Telecommunications Standards Institute (ETSI), Inaccurate measurement of standard materials

ETSI ETR 304-1996 Methods for Testing and Specification (MTS); The Future in ETSI of Quality of Standards-Making, Validation and Testing
ETSI TR 102 215-2003 Electromagnetic compatibility and Radio spectrum Matters (ERM); Recommended approach, and possible limits for measurement uncertainty for the measurement of radiated electromagnetic fields above 1 GHz V1.1.2

International Electrotechnical Commission (IEC), Inaccurate measurement of standard materials

CISPR/TR 16-4-1-2009 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-1: Uncertainties, statistics and limit modelling – Uncertainties in standardized EMC tests
CISPR 16-4-1-2003 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1:Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests
CISPR 16-4-1/TR-2005 Specification for radio disturbance and immunity measuring apparatus and methods--Part4-1:Uncertainties,statistics and limit modelling -Uncertainties in standardized EMC tests
CISPR TR 16-4-1:2009 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests
CISPR TR 16-4-1-2009 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests

ZA-SANS, Inaccurate measurement of standard materials

SANS 216-4-1:2009 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests
SANS 886:2009 Water quality - Enumeration of micro-organisms in water samples - Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty of measurement

Japanese Industrial Standards Committee (JISC), Inaccurate measurement of standard materials

JIS B 7443-3:2015 Geometrical product specifications (GPS) -- Coordinate measuring machines (CMM) : Technique for determining the uncertainty of measurement -- Part 3: Use of calibrated workpieces or measurement standards

European Committee for Standardization (CEN), Inaccurate measurement of standard materials

CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
CEN ISO/TS 15530-3:2007 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards
EN ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
EN ISO 3233-3:2015 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of
EN 14907:2005 Ambient air quality Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
EN 14184:2003 Water quality Guidance standard for the surveying of aquatic macrophytes in running waters
EN 14184:2014 Water quality - Guidance for the surveying of aquatic macrophytes in running waters
PD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN ISO 21253-2:2019 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019)
CEN/TR 10317:2020 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products
FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

HU-MSZT, Inaccurate measurement of standard materials

MSZ 9272-1969

US-FCR, Inaccurate measurement of standard materials

FCR 21 CFR PART 660-2015 ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS
FCR 21 CFR PART 660-2014 ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS
FCR 21 CFR PART 660-2013 ADDITIONAL STANDARDS FOR DIAGNOSTIC SUBSTANCES FOR LABORATORY TESTS

IEC - International Electrotechnical Commission, Inaccurate measurement of standard materials

CISPR/TR 16-4-1 AMD 2-2007 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-1: Uncertainties@ statistics and limit modelling – Uncertainties in standardized EMC tests (Edition 1.1)
CISPR/TR 16-4-1-2005 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-1: Uncertainties@ statistics and limit modelling – Uncertainties in standardized EMC tests (Edition 1.1; Consolidated Reprint)
CISPR/TR 16-4-1-2003 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-1: Uncertainties@ statistics and limit modelling – Uncertainties in standardized EMC tests (Edition 1.0; Together with CISPR 16-4-3@ CISPR 16-4-4 and and the Second

Shanxi Provincial Standard of the People's Republic of China, Inaccurate measurement of standard materials

DB14/T 1981-2020 Internal quality control reference material control method for the validity of test results

The American Road & Transportation Builders Association, Inaccurate measurement of standard materials

AASHTO T 111-2010 Standard Method of Test for Mineral Matter or Ash in Asphalt Materials
AASHTO T 111-2011 Standard Method of Test for Mineral Matter or Ash in Asphalt Materials
AASHTO T 111-2021 Standard Method of Test for Mineral Matter or Ash in Asphalt Materials

AASHTO - American Association of State Highway and Transportation Officials, Inaccurate measurement of standard materials

T 111-2009 Standard Method of Test for Mineral Matter or Ash in Asphalt Materials
T 111-2010 Standard Method of Test for Mineral Matter or Ash in Asphalt Materials
T81-1987 Standard Test Method for Xylene-Insoluble Matter in Creosote (Eighteenth Edition; Withdrawn; Delete Standard Due to the Lack of Use)
TP 63-2003 Standard Method of Test for Determining Rutting Susceptibility of Asphalt Paving Mixtures Using the Asphalt Pavement Analyzer (APA)

Professional Standard - Urban Construction, Inaccurate measurement of standard materials

CJ 26.10-1991 Determination of standard sulfide in urban sewage water quality inspection method
CJ 26.9-1991 Determination of Standard Cyanide in Municipal Sewage Water Quality Inspection Method

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Inaccurate measurement of standard materials

IEEE C63.23-2012 American National Standard Guide for Electromagnetic Compatibility-Computations and Treatment of Measurement Uncertainty (Includes Access to Additional Content)

Underwriters Laboratories (UL), Inaccurate measurement of standard materials

UL 2904 BULLETIN-2023 UL Standard for Safety Standard Method for Testing and Assessing Particle and Chemical Emissions from 3D Printers

检验方法与规程专业（理化）, Inaccurate measurement of standard materials

GB 14883.5-2016 National food safety standard Determination of radioactive substance polonium-210 in food
GB 14883.9-2016 Determination of Radioactive Substance Iodine-131 in Food Safety National Standard Food
GB 14883.4-2016 Determination of radioactive substance promethium-147 in national food safety standard food
GB 14883.10-2016 National Food Safety Standards Determination of Radioactive Substance Cesium-137 in Food

ES-UNE, Inaccurate measurement of standard materials

UNE-EN ISO 21253-2:2020 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019)
UNE-EN 14128:2020 Durability of wood and wood-based products - Efficacy criteria for curative wood preservatives as determined by biological tests

国家能源局, Inaccurate measurement of standard materials

NB/T 34057.2-2017 Determination of chemical composition of lignocellulosic biomass raw materials Part 2: Purification of standard samples
NB/T 34057.1-2017 Determination of chemical composition of lignocellulosic biomass raw materials Part 1: Preparation of standard samples

VE-FONDONORMA, Inaccurate measurement of standard materials

COVENIN 571-1976

AENOR, Inaccurate measurement of standard materials

UNE-EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

KE-KEBS, Inaccurate measurement of standard materials

KS 08-264-1981 KENYA STANDARD METHODS FOR ESTIMATION OF MOISTURE. TOTAL SIZE OR FINISH, ASH. FATTY MATTER AND DETERMINATION OF WATER-SOLUBLE MATTER IN TEXTILES

Occupational Health Standard of the People's Republic of China, Inaccurate measurement of standard materials

GBZ/T 210.5-2008 Guide for establishing occupational health standards-Part 5: Determination methods of chemicals in biological material