ZH
RU
ES

The specific heat capacity of indium

The specific heat capacity of indium, Total:384 items.

In the international standard classification, The specific heat capacity of indium involves: Plastics, Petroleum products in general, Thermodynamics and temperature measurements, Ceramics, Testing of metals, Reinforced plastics, Refractories, Protection of and in buildings, Metrology and measurement in general, Non-ferrous metals, Raw materials for rubber and plastics, Products of the chemical industry, Pipeline components and pipelines, Construction materials, Ferroalloys, Paper and board, Earthworks. Excavations. Foundation construction. Underground works, Refrigerating technology, Milk and milk products, Semiconducting materials, Analytical chemistry, Conducting materials, Insulating fluids, Water quality, Natural gas, Burners. Boilers, Installations in buildings, Fluid storage devices, Wood, sawlogs and sawn timber, Fluid power systems, Capacitors, Elements of buildings, Paint ingredients, Agricultural machines, implements and equipment, Aerospace electric equipment and systems, Cellular materials, Solar energy engineering, Fuels, Electrical engineering in general, Electrical wires and cables, Ventilators. Fans. Air-conditioners, Glass, Packaging and distribution of goods in general, Bottles. Pots. Jars, Powder metallurgy, Protection against electric shock, Electrical equipment for working in special conditions, Fruits. Vegetables, General methods of tests and analysis for food products, Rubber and plastics products, Heat pumps, Crude petroleum, Iron and steel products, Aircraft and space vehicles in general, Nuclear energy engineering, Non-destructive testing, Measurement of force, weight and pressure.

Professional Standard - Petroleum, The specific heat capacity of indium

SY/T 7517-2010 Determination for heat capacity of crude oil
SY 7517-2010 Determination method of specific heat capacity of crude oil
SY/T 7517-1994 Determination method of crude oil specific heat capacity adiabatic calorimetry

Japanese Industrial Standards Committee (JISC), The specific heat capacity of indium

JIS K 7123:1987 Testing methods for specific heat capacity of plastics
JIS K 7123 AMD 1:2012 Testing methods for specific heat capacity of plastics (Amendment 1)
JIS R 1611:1997 Test methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by laser flash method
JIS R 1611:2010 Measurement methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by flash method
JIS P 8118:2014 Paper and board -- Determination of thickness, density and specific volume
JIS R 2614:1985 Testing method for specific gravity and true porosity of insulating fire bricks
JIS R 1650-3:2002 Method for measurement of fine ceramics thermoelectric materials Part 3: Thermal diffusivity, specific heat capacity, and thermal conductivity
JIS G 3194 AMD 1:2010 Dimensions, mass and permissible variations of hot rolled flat steel (Amendment 1)
JIS G 3192 AMD 1:2010 Dimensions, mass and permissible variations of hot rolled steel sections (Amendment 1)

Professional Standard - Energy, The specific heat capacity of indium

NB/SH/T 0632-2014 Standard test method for determining specific heat capacity by differential scanning calorimetry

能源部, The specific heat capacity of indium

SY 7517-1992 Adiabatic calorimetric method for determination of specific heat capacity of crude oil

Korean Agency for Technology and Standards (KATS), The specific heat capacity of indium

KS M 3049-2011(2013) Testing methods for specific heat capacity of plastics
KS M 3049-2011 Testing methods for specific heat capacity of plastics
KS M ISO 11357-4-2016(2021) Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
KS L 1604-2017 Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS L 1604-2017(2022) Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS L 1604-2002 Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS M ISO 9967:2003 Thermoplastics pipes-Determination of creep ratio
KS M ISO 9967:2016 Thermoplastics pipes－Determination of creep ratio
KS M ISO 534:2011 Paper and board-Determination of thickness, density and specific volume
KS M ISO 534:2014 Paper and board — Determination of thickness, density and specific volume
KS M ISO 534:2020 Paper and board — Determination of thickness, density and specific volume
KS H ISO 6735:2006 Dried milk－Assessment of heat class－Heat-number reference method
KS M ISO 9967-2016(2021) Thermoplastics pipes－Determination of creep ratio
KS D ISO 11438-8:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 8:Determination of indium content
KS D ISO 11438-8:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 8：Determination of indium content
KS C IEC 61788-5:2002 Superconductivity-Part 5:Matrix to superconductor volume ratio measurement-Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
KS C 6421-2002 FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE IN ELECTRONIC EQUIPMENT
KS C 6421-1982 FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE IN ELECTRONIC EQUIPMENT
KS L 3304-2012(2022) Testing method for specific gravity and true porosity of insulating fire bricks
KS H ISO 11289:2007 Heat-processed foods in hermetically sealed containers－Determination of pH
KS B ISO 21029-2-2017(2022) Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements
KS W 0680-2008(2013) Space-systems performance and quality assessment-general thermal space radiator

British Standards Institution (BSI), The specific heat capacity of indium

BS EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Determination of specific heat capacity
BS EN ISO 11357-4:2014 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
BS EN ISO 11357-4:2021 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
BS EN 821-3:2005 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Determination of specific heat capacity
BS ISO 19935-2:2020 Plastics. Temperature modulated DSC. Measurement of specific heat capacity cp
BS ISO 24144:2023 Thermal insulation. Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range. Differential scanning calorimetry (DSC) method
22/30397807 DC BS ISO 24144. Thermal insulation. Test method for Specific heat capacity of thermal insulation for buildings in the high temperature range. DSC method
20/30406588 DC BS EN ISO 11357-4. Plastics. Differential scanning calorimetry (DSC). Part 4. Determination of specific heat capacity
BS ISO 19628:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of specific heat capacity
BS EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of specific heat capacity
BS ISO 11438-8:1993 Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of indium content
BS EN ISO 534:2011 Paper and board. Determination of thickness, density and specific volume
BS 853-1:1990 Specification for vessels for use in heating systems. Calorifiers and storage vessels for central heating and hot water supply
BS 853-1:1990+A3:2011 Specification for vessels for use in heating systems. Calorifiers and storage vessels for central heating and hot water supply
BS 3483-C8:1980 Methods for testing pigments for paints - Comparison of heat stability
BS EN 14037-3:2003 Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Rating method and evaluation of radiant thermal output
BS ISO 22007-6:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Comparative method for low thermal conductivities using a temperature-modulation technique
BS EN ISO 22007-6:2015 Plastics. Determination of thermal conductivity and thermal diffusivity. Comparative method for low thermal conductivities using a temperature-modulation technique
BS EN ISO 4590:2003 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
BS EN 1251-1:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Fundamental requirements
BS EN ISO 21029-2:2015 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1 000 litres volume. Operational requirements
BS EN 1251-3:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Operational requirements
BS EN ISO 9967:2016 Tracked Changes. Thermoplastics pipes. Determination of creep ratio
BS ISO 17744:2004 Plastics - Determination of specific volume as a function of temperature and pressure (pVT diagram) - Piston apparatus method
BS EN 61481-1:2014 Live working. Phase comparators. Capacitive type to be used for voltages exceeding 1 kV a.c
PD ISO/TR 14232-2:2017 Thermal spraying. Powders. Comparison of coating performance and spray powder chemistry
BS EN 1251-2:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Design, fabrication, inspection and testing

Military Standard of the People's Republic of China-General Armament Department, The specific heat capacity of indium

GJB 772.309-1993 Test Methods for Explosives Specific Heat Capacity Determination Microcaloric Calorimetry
GJB 737.8-1993 Test methods for pyrotechnics. Determination of specific heat capacity. Microcalorimetric method.
GJB 331-1987 Test method for specific heat capacity of solid materials 60-370K
GJB 1715-1993 Test method for medium temperature specific heat capacity of fibrous and powdery materials
GJB 330-1987 Test method for average specific heat capacity of solid materials from room temperature to 800°C
GJB 8683.8-2015 Test methods for physical parameters of pyrotechnics Part 8: Continuous specific heat capacity determination Differential scanning calorimetry

ESDU - Engineering Sciences Data Unit, The specific heat capacity of indium

AERO 00.01.08 A-1982 Specific heat capacities and their ratio as functions of temperature for several common gases.
ESDU 68008 C-1978 Specific heat capacity at constant pressure of ice@ water and steam.
ESDU 99011 A-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: Aliphatic hydrocarbons - alkanes.
ESDU 99005 A-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: inorganic gases.
ESDU 02004 A-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: halogenated hydrocarbons - haloethanes.
ESDU 00052-2001 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: oxygenated hydrocarbons - aliphatic esters.
ESDU 02003-2002 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: halogenated hydrocarbons - halomethanes.
ESDU 00019-2001 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: oxygenated aliphatic hydrocarbons - alcohols@ aldehydes@ ketones and ethers.
ESDU 03008-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: Halogenated hydrocarbons - halopropanes@ butanes@ ethylenes@ benzenes.
ESDU 00051-2001 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: hydrocarbons - alkenes@ alkadienes@ alkynes@ cycloalkanes@ aromatics.
AERO 00.03.30 A-1999 Solutions to the oblique shock wave relations for a range of specific heat ratios: pressure coefficient and detachment angle.
AERO 00.03.30-1965 SOLUTIONS TO THE OBLIQUE SHOCK WAVE RELATIONS FOR A RANGE OF SPECIFIC HEAT RATIOS: PRESSURE COEFFICIENT AND DETACHMENT ANGLE
ESDU 86007 B-2003 Heat capacity and enthalpy of liquids: alkanes.
ESDU 75015 A-2003 Heat capacity and enthalpy of liquids: aromatic hydrocarbons.
ESDU 79028 B-2005 Heat capacity and enthalpy of liquids: aliphatic alcohols.
ESDU 79028 A-2003 Heat capacity and enthalpy of liquids: Aliphatic alcohols
ESDU 76010 B-2003 Heat capacity and enthalpy of liquids: halogenated methanes.
ESDU 81030 A-2003 Heat capacity and enthalpy of liquids: aliphatic ketones.
ESDU 86023 A-2003 Heat capacity and enthalpy of liquids: alkenes and alkadienes.
AERO 00.03.31-1965 Solutions to the Prandtl-Meyer expansion relations for a range of specific heat ratios: pressure coefficient and maximum flow deflection angle.
ESDU 77007 A-2003 Heat capacity and enthalpy of liquids: halogenated ethanes and ethylenes.
AERO 00.01.09 A-1975 A simple model of a thermally perfect@ calorically imperfect diatomic gas. Comparison with real gases.
ESDU 85024 A-2003 Heat capacity and enthalpy of liquids: organic sulphur compounds (thiols and sulphides).

RU-GOST R, The specific heat capacity of indium

GOST R 56754-2015 Plastics. Differential scanning calorimetry (DSC). Part 4. Determination of specific heat capacity
GOST R 57969-2017 Polymer composites. Determination of specific heat capacity by differential scanning calorimetry with temperature modulation
GOST 10898.4-1984 Ion-exchange resins. Determination of specific volume
GOST 23250-1978 Building materials. Method of specific heat determination
GOST R ISO 534-2012 Paper and board. Determination of thickness, density and specific volume
GOST 10062-1975 Natural combustible gases. Method for determination of specific heat of combustion
GOST 21523.3.1-1993 Modified wood. Method for determination of heat capacity
GOST 27851-1988 Hydraulic drive volumetric pumps. Accelerated comparative life tests
GOST 31168-2014 Houses. Method for determination of specific heat consumption for building heating
GOST R 57712-2017 Polymer composites. Test method for determination of specific heat
GOST 28794-1990 Reagents. Method for the determination of specific surface of chromatographic materials by thermal desorption
GOST 21523.3-1987 Modified wood. Method for determination of thermal conductivity, heat conductivity and heat capacity
GOST 13903-2005 Glass containers. Methods of testing the thermal resistivity
GOST R 50237-1992 Modified wood. Method for determination of heat capacity
GOST 13903-1993 Glass containers. Test methods for thermal resistivity
GOST 17733-1989 Glass containers. Method for determination of thermal resistance at raised temperatures

Association Francaise de Normalisation, The specific heat capacity of indium

NF T51-507-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: determination of specific heat capacity
NF T51-507-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
NF T51-507-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
NF EN ISO 19628:2021 Céramiques techniques - Propriétés thermophysiques des composites céramiques - Détermination de la capacité thermique spécifique
NF B41-215*NF EN 821-3:2005 Advanced technical ceramics - Monolithic ceramics - Thermophysical properties - Part 3 : determination of specific heat capacity
NF A54-102:2015 Ferronickel - Electrothermal atomic absorption spectrometric method - Determination of antimony, silver, tin, indium, lead, tellerium and thallium
NF B43-365*NF EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity
NF Q03-016:2005 Paper and board - Determination of thickness, density and specific volume.
NF Q03-016*NF EN ISO 534:2011 Paper and board - Determination of thickness, density and specific volume.
NF EN ISO 534:2011 Papier et carton - Détermination de l'épaisseur, de la masse volumique et du volume spécifique
NF T54-911:2008 Thermoplastics pipes - Determination of creep ratio.
NF T54-911*NF EN ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio
NF EN ISO 12567-1:2013 Isolation thermique des fenêtres et portes - Détermination de la transmission thermique par la méthode à la boîte chaude - Partie 1 : fenêtres et portes complètes
NF EN 12130:2018 Plumes et duvets - Méthodes d'essais - Détermination du pouvoir gonflant (volume massique)
NF B35-516:1983 Laboratory glassware. Thermo-alcoholometers and alcoholthermohydrometers.
NF EN 12546-1:2000 Matériaux et objets en contact avec les denrées alimentaires - Récipients isolants à usage domestique - Partie 1 : spécifications concernant les récipients isolants, bouteilles et carafes isolantes
NF P50-103:1988 Solar energy. Hot water tanks heated by heat transfer fluids. Vocabulary.
NF EN 821-3:2005 Céramiques techniques avancées - Céramiques monolithiques - Propriétés thermophysiques - Partie 3 : détermination de la chaleur spécifique
NF B43-210:2003 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3 : determination of specific heat capacity.
NF C73-223:1983 Heating Household Appliances Water heaters with a partial capacity electrically heated Performance Requirements
NF T51-227-6*NF EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6 :comparative method for low thermal conductivities using a temperature-modulation technique
NF EN ISO 22007-6:2015 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 6 : méthode comparative pour faibles conductivités thermiques utilisant une technique de modulation de la température
NF C79-632-1*NF EN 60519-21:2009 Safety in electroheat installations - Part 21 : particular requirements for resistance heating equipment - Heating and melting glass equipment
NF V08-406*NF ISO 11289:1993 Heat-processed foods in hermetically sealed containers. Determination of ph.
NF E86-510-2*NF EN ISO 21029-2:2015 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2 : operational requirements

International Organization for Standardization (ISO), The specific heat capacity of indium

ISO 11357-4:2005 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 19935-2:2020 Plastics — Temperature modulated DSC — Part 2: Measurement of specific heat capacity cp
ISO 24144:2023 Thermal insulation — Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range — Differential scanning calorimetry (DSC) method
ISO 19628:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity
ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio
ISO 534:2011 Paper and board - Determination of thickness, density and specific volume
ISO 534:2005 Paper and board - Determination of thickness, density and specific volume
ISO 6735:1985 Dried milk; Assessment of heat class; Heat-number reference method
ISO 11438-8:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 8: determination of indium content
ISO/CD 17744:2023 Plastics — Determination of specific volume as a function of temperature and pressure, pvT diagram — Piston apparatus method
ISO 17744:2004 Plastics - Determination of specific volume as a function of temperature and pressure (pvT diagram) - Piston apparatus method
ISO 22007-6:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
ISO 11289:1993 Heat-processed foods in hermetically sealed containers; determination of pH

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The specific heat capacity of indium

GB/T 19466.4-2016 Plastics—Differential scanning calorimetry （DSC）—Part 4: Determination of specific heat capacity

Danish Standards Foundation, The specific heat capacity of indium

DS/EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
DS/ISO 11357-4:2021 Plastics – Differential scanning calorimetry (DSC) – Part 4: Determination of specific heat capacity
DS/EN ISO 11357-4:2021 Plastics – Differential scanning calorimetry (DSC) – Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
DS/EN 821-3:2005 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity
DS/EN 1159-3/AC:2008 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
DS/EN 1159-3:2003 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
DS/EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) – Thermophysical properties of ceramic composites – Determination of specific heat capacity (ISO 19628:2017)
DS/EN ISO 534:2012 Paper and board - Determination of thickness, density and specific volume
DS/EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio
DS/ENV 821-3:1993 Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Part 3: Determination of specific heat capacity
DS/EN 1251-1:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements
DS/EN 1251-3:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements

IT-UNI, The specific heat capacity of indium

UNI EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
UNI EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity

KR-KS, The specific heat capacity of indium

KS M ISO 11357-4-2016 Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
KS D ISO 11438-8-2012 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 8：Determination of indium content
KS M ISO 534-2020 Paper and board — Determination of thickness, density and specific volume
KS M ISO 9967-2016 Thermoplastics pipes－Determination of creep ratio

ES-UNE, The specific heat capacity of indium

UNE-EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
UNE-EN 821-3:2005 Advanced technical ceramics - Monolithic ceramics. Thermo-physical properties - Part 3: Determination of specific heat capacity (Endorsed by AENOR in March of 2005.)
UNE-EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity (ISO 19628:2017) (Endorsed by Asociación Española de Normalización in April of 2021.)
UNE-EN ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
UNE-EN ISO 21029-2:2016 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements (ISO 21029-2:2015)

American Society for Testing and Materials (ASTM), The specific heat capacity of indium

ASTM E1269-11 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-11(2018) Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E2716-23 Standard Test Method for Determining Specific Heat Capacity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E2716-09 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
ASTM E2716-09(2014) Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
ASTM C351-92b(1999) Standard Test Method for Mean Specific Heat of Thermal Insulation
ASTM C351-92b(1999)e1 Standard Test Method for Mean Specific Heat of Thermal Insulation
ASTM D4611-16 Standard Test Method for Specific Heat of Rock and Soil
ASTM D4611-86(2004) Standard Test Method for Specific Heat of Rock and Soil
ASTM D4611-86(2000) Standard Test Method for Specific Heat of Rock and Soil
ASTM D4611-08 Standard Test Method for Specific Heat of Rock and Soil
ASTM F2682-07(2018) Standard Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom
ASTM D2766-95(2005) Standard Test Method for Specific Heat of Liquids and Solids
ASTM D2766-95(2000) Standard Test Method for Specific Heat of Liquids and Solids
ASTM D2766-95(2009) Standard Test Method for Specific Heat of Liquids and Solids
ASTM D2766-95 Standard Test Method for Specific Heat of Liquids and Solids
ASTM E2584-20 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM A593-72 Specification for Charpy V-nNtch Testing Requirements for Steel Plates for Pressure Vessel
ASTM E1225-20 Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
ASTM E1225-99 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
ASTM D3588-98 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM E220-07 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM E220-07e1 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM D3588-98(2003) Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
ASTM E220-02 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM E220-19 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM E220-13 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM E220-07a Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM E2584-07 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM C149-86(2005) Standard Test Method for Thermal Shock Resistance of Glass Containers
ASTM E457-96 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E457-96(2002) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E457-08 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E457-08(2020) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E457-08(2015) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E816-05(2010) Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
ASTM D5472-93(1999)e1 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM C1039-85(2000) Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
ASTM E734-80(2021) Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)
ASTM D5472/D5472M-20 Standard Practice for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM E734-80(2015) Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)
ASTM E2584-10 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM D6446-99 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
ASTM D6446-01 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
ASTM E1225-04 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
ASTM E1225-09 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
ASTM E1225-13 Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
ASTM D5472-93(2005) Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM D5472/D5472M-14 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM D6822-12b(2017)e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM C149-86(2010) Standard Test Method for Thermal Shock Resistance of Glass Containers

Professional Standard - Aerospace, The specific heat capacity of indium

QJ 968-1986 Test method for low temperature specific heat capacity of solid materials
QJ 1521-1988 Test method for deep low temperature specific heat capacity of solid materials
QJ 2275-1992 Method for determination of specific heat capacity of composite solid propellant
QJ 969-1986 Test method for average specific heat capacity of solid materials at high temperature up to 800°
QJ 809-1994 Quasi-steady-state method for the determination of thermal conductivity and specific heat capacity of composite solid propellants

未注明发布机构, The specific heat capacity of indium

GJB 330A-2000 Test method for specific heat capacity of solid materials 60~2773K
BS EN 821-3:2005(2009) Advanced technical ceramics — Monolithic ceramics . Thermophysical properties — Part 3 : Determination of specific heat capacity
DIN EN ISO 534:2005 Paper and cardboard – Determination of thickness, density and specific volume (ISO 534:2005)
BS EN 61481-1:2014(2015) Live working — Phase comparators Part 1 : Capacitive type to be used for voltages exceeding 1 kV A.C.
BS 6993-2:1990(2007) Thermal and radiometric properties of glazing — Part 2 : Method for direct measurement of U - value (thermal transmittance)

工业和信息化部, The specific heat capacity of indium

YS/T 1256-2018 Differential scanning calorimetry for specific heat capacity test of non-ferrous metal materials
JB/T 13515-2018 Volumetric chilled water (heat pump) unit with full heat recovery

European Committee for Standardization (CEN), The specific heat capacity of indium

EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
DD ENV 821-3-1993 Advanced Technical Ceramics - Monolithic Ceramics - Thermo- Physical Properties - Part 3: Determination of Specific Heat Capacity
EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity (ISO 19628:2017)
EN ISO 534:2011 Paper and board - Determination of thickness, density and specific volume
EN ISO 534:2005 Paper and board - Determination of thickness, density and specific volume ISO 534:2005; Supersedes EN 20534:1993
EN 1251-1:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements
EN 1251-3:2000 Cryogenic Vessels - Transportable Vacuum Insulated Vessels of Not More Than 1000 Litres Volume - Part 3: Operational Requirements
EN ISO/TS 16491:2012 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests

CEN - European Committee for Standardization, The specific heat capacity of indium

EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The specific heat capacity of indium

GB/T 3140-1995 Test method for mean specific heat capacity of fiber reinforced plastics
GB/T 3140-2005 Fiber-reinforced plastics composites-Determination of mean specific heat capacity
GB/T 3781.6-1993 Acetylene black--Determination of apparent specificvolume
GB/T 3781.6-2006 Acetylene black.Part 6:Determination of apparent specific volume
GB/T 18042-2000 Thermoplastics pipes-Determination of creep ratio
GB/T 26550-2011 Testing and appraising of similitude thermal efficiency for grain dryer
GB/T 1711-1989 Comparison of heat stability of pigments in stoving medium
GB/T 7702.20-2008 Test method for granular activated carbon from coal.Determination of pore volume and specific surface area
GB/T 11842-1989 Determination of oxygen to uranium atomic ratic in uranium dioxide powder and pellets by thermogravimetric method
GB 11842-1989 Determination of Atomic Ratio of Oxygen to Uranium in Uranium Dioxide Powder and Pellets by Thermogravimetry
GB/T 31362-2015 Non-destructive testing.Thermal neutron radiographic testing.Determination of beam L/D ratio

国家市场监督管理总局、中国国家标准化管理委员会, The specific heat capacity of indium

GB/T 5990-2021 Refractory materials—Determination of thermal conductivity, specific heat capacity and thermal diffusivity(hot-wire method)
GB/T 3781.6-2019 Acetylene black—Part 6：Determination of apparent specific volume

AT-ON, The specific heat capacity of indium

OENORM EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
ONORM ENV 821-3-1993 Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Part 3: Determination of specific heat capacity

CH-SNV, The specific heat capacity of indium

SN EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
SN EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity (ISO 19628:2017)

Lithuanian Standards Office , The specific heat capacity of indium

LST EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
LST EN 821-3-2005 Advanced technical ceramics - Monolithic ceramics. Thermo-physical properties - Part 3: Determination of specific heat capacity
LST EN 1159-3-2003 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
LST EN 1159-3-2003/AC-2007 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
LST EN 1159-3-2003/AC-2008 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity
LST EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity (ISO 19628:2017)
LST EN ISO 534:2012 Paper and board - Determination of thickness, density and specific volume (ISO 534:2011)
LST EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2007)
LST EN 1251-1-2002 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements
LST EN 1251-3-2002 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements

PL-PKN, The specific heat capacity of indium

PN-EN ISO 11357-4-2021-07 E Plastics--Differential scanning calorimetry (DSC)--Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
PN-EN ISO 19628-2021-08 E Fine ceramics (advanced ceramics, advanced technical ceramics)--Thermophysical properties of ceramic composites--Determination of specific heat capacity (ISO 19628:2017)
PN C04302-1989 Coke of hard coal Thermogravimetric method of combustibility determina.tion
PN C82055-11-1989 Test methods of pressed carbon products Determination of thermal specific conductivity with comparative method

AENOR, The specific heat capacity of indium

UNE-EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014)
UNE-EN ISO 534:2012 Paper and board - Determination of thickness, density and specific volume (ISO 534:2011)

German Institute for Standardization, The specific heat capacity of indium

DIN EN ISO 11357-4:2021-05 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021); German version EN ISO 11357-4:2021
DIN EN ISO 11357-4:2020 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO/DIS 11357-4:2020); German and English version prEN ISO 11357-4:2020
DIN EN 821-3:2005-04 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity; German version EN 821-3:2005
DIN EN ISO 19628:2021-06 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity (ISO 19628:2017); German version EN ISO 19628:2021
DIN EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021); German version EN ISO 11357-4:2021
DIN EN ISO 19628:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity (ISO 19628:2017); German and English version prEN ISO 19628:2020
DIN EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014); German version EN ISO 11357-4:2014
DIN EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2005); German version EN ISO 11357-4:2013
DIN EN ISO 534:2012 Paper and board - Determination of thickness, density and specific volume (ISO 534:2011); German version EN ISO 534:2011
DIN EN ISO 534:2012-02 Paper and board - Determination of thickness, density and specific volume (ISO 534:2011); German version EN ISO 534:2011
DIN EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2007); English version of DIN EN ISO 9967:2008-02
DIN 1715-2:1983 Thermostat metals; testing the specific thermal curvature
DIN EN ISO 9967:2016-07 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016); German version EN ISO 9967:2016
DIN EN ISO 19628:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity (ISO 19628:2017); German version EN ISO 19628:2021
DIN 5496:1991 Thermal radiation of volume radiators
DIN 6622-2:1981 Household tanks for storing heating oil; 1000 litre
DIN EN 821-3:2005 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity; German version EN 821-3:2005
DIN 6622-3:1981 Household tanks for storing heating oil; tubs
DIN 66133:1993 Determination of pore volume distribution and specific surface area of solids by mercury intrusion
DIN EN 1159-3:2008 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity(includes Corrigendum AC:2008); English version of DIN EN 1159-1:2008-06
DIN 10290:1981-11 Thermohydrometer for the density measurement of milk and skim-milk
DIN 6622-1:1981 Household tanks for storing heating oil; 620 litre
DIN 44535:1968 Non-thermal storage water heater, wall mounting type, capacity 15 and 80 litres; requirements
DIN EN 1251-1:2000-03 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements; German version EN 1251-1:2000
DIN EN ISO 21029-2:2016-02 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements (ISO 21029-2:2015); German version EN ISO 21029-2:2015

Group Standards of the People's Republic of China, The specific heat capacity of indium

T/CI 038-2021 The test method of mean specific heat capacity for lithium ion battery cell
T/CPCIF 0140-2021 Catalyst carrier— Determination of surface area and pore volume for quasi-thin-water aluminit— Nitrogen adsorption method

Guangxi Provincial Standard of the People's Republic of China, The specific heat capacity of indium

DB45/T 2109-2019 Volumetric method for determination of selenium content in copper indium gallium selenide solar photovoltaic cell target

Taiwan Provincial Standard of the People's Republic of China, The specific heat capacity of indium

CNS 13984-1997 Methods of test for thermal diffusivity,specific heat capacity,and thermal conductivity of fine ceramics by laser flash method

IN-BIS, The specific heat capacity of indium

IS 10699-1983

YU-JUS, The specific heat capacity of indium

JUS U.J5.050-1987 Heat in civil engineering. Meesuring specific heat cap*city

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., The specific heat capacity of indium

ASHRAE 3977-1996 Experimental Comparison of Two-Speed and Single-Speed Geothermal Heat Pumps
ASHRAE CH-03-5-4-2003 Vapor Pressure and Specific Heat of LiBr-H2O at High Temperature
ASHRAE KC-03-5-3-2003 Performance Comparison of Waste Heat-Driven Desiccant Systems
ASHRAE TO-98-3-3-1998 Comparison Study of Compact Plate Fin-and-Tube Heat Exchangers
ASHRAE PH-97-10-4-1997 Comparative Study of Heat Transfer Characteristics of New Alternatives to R-22
ASHRAE TO-98-17-3-1998 Comparative Summer Attic Thermal Performance of Six Roof Constructions
ASHRAE OR-16-C047-2016 Experimental Validation of a Thermal Resistance and Capacity Model for Geothermal Boreholes
ASHRAE HI-02-8-2-2002 Field Test Comparison of Hot Water Recirculation Loop vs. Point-of-Use Water Heaters in a High School
ASHRAE 3808-1994 Shell-Side Condensation Heat Transfer of R-134A - Part III: Comparison with R-12
ASHRAE 3847-1995 Comparison of Energy Prediction of Three Ground-Coupling Heat Transfer Calculation Methods
ASHRAE DA-07-057-2007 Comparative Analysis of four Solar Models for Tropical Sites (RP-1309)
ASHRAE MN-00-2-3-2000 GSHP Bore Field Performance Comparisons of Standard and Thermally Enhanced Grout
ASHRAE SE-99-20-01-1999 A New Comparison of Vertical Ground Heat Exchanger Design Methods for Residential Applications
ASHRAE 3908-1995 Experimental Comparison on Performance of Rotary Compressors with Different HFC-134A Compatible Lubricants
ASHRAE DA-00-13-1-2000 Comparison of Vertical Ground Heat Exchanger Design Software for Commercial Applications
ASHRAE SD-95-13-1995 Design Methods and Installation Cost Comparisons of Commercial GSHP Systems

CZ-CSN, The specific heat capacity of indium

CSN 72 5031-1973 Testing of fired ceramic materials. Determination of medium specific heat
CSN 70 0537-1981 Glass Method for determination oí the spec'fic volume electrical resistanca at elevated temperatures
CSN 70 0559-1972 Testing of glass containers. Thermal shock test on glass containers
CSN 35 8207-1964 Capacitors for use under tropical conditions.
CSN 35 8785-1975 Semiconductor devices. Varicaps. Measurement of thermal capacitance coefflcient.
CSN 34 6319-1987 Testing of ceramic electrotechnic materials. Methods of the determination of medium specific heat, thermal conductivity and medium temperature conductivity

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, The specific heat capacity of indium

GJB 5382.8-2005 Test methods of physical parameter for pyrotechnic. Part 8: Determination of specific heat capacity. DSC method

VN-TCVN, The specific heat capacity of indium

TCVN 3652-2007 Paper and board.Determination of thickness, density and specific volume

Indonesia Standards, The specific heat capacity of indium

SNI ISO 534:2011 Paper and board - Determination of thickness, density and specific volume

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), The specific heat capacity of indium

ASHRAE 4701-2004 A Comparison of Electrical- and Thermal-Load-Following CHP Systems
ASHRAE 4612-2003 Comparison of Four Models for Thermal Response Test Evaluation
ASHRAE AN-04-8-3-2004 Water Chemistry Issues in Geothermal Heat Pump Systems

BE-NBN, The specific heat capacity of indium

NBN E 18-001-1976

Professional Standard - Electron, The specific heat capacity of indium

SJ 3244.4-1989 Methods of measurement for profile distribution of carrier concentration of Gallium arsenide and Indium phosphide materials--Electrochemical voltage capacitance method

HU-MSZT, The specific heat capacity of indium

MSZ 20858-1957

American Society of Mechanical Engineers (ASME), The specific heat capacity of indium

ASME STP-PT-007-2006 COMPARISON OF PRESSURE VESSEL CODES ASME SECTION VIII AND EN13445 Technical, Commercial, and Usage Comparison Design Fatigue Life Comparison
ASME SEC XI D1 NMA APP K-2003 Appendix K Assessment of Reactor Vessels with Low Upper Shelf Charpy Impact Energy Levels

International Telecommunication Union (ITU), The specific heat capacity of indium

ITU-R BS.216-2-1982 Protection Ratio for Sound Broadcasting in the Tropical Zone

The American Road & Transportation Builders Association, The specific heat capacity of indium

AASHTO TP 72-2008 Standard Method of Test for Quantitative Determination of the Percentage of Lime in Hot Mix Asphalt (HMA)

SE-SIS, The specific heat capacity of indium

SIS 71 10 33-1961 Thermal shnrk test nn glass containers

Defense Logistics Agency, The specific heat capacity of indium

DLA A-A-52193 F-2008 FOOD CONTAINER, INSULATED, WITH INSERTS
DLA DSCC-DWG-85019 REV E-2008 DELAY LINES, PROGRAMMABLE 16 PIN COMPATIBLE, 3 BIT, TTL COMPATIBLE
DLA A-A-50223 A VALID NOTICE 1-2006 SCALE, BEAM INDICATING: WEIGHING, SPECIFIC GRAVITY; CAPACITY 0.01 NOT LESS THAN 200 GRAMS, THREE OR FOUR WEIGHT BEAMS: 0.01 GRAM SENSITIVITY
DLA A-A-50223 A-2001 SCALE, BEAM INDICATING: WEIGHING, SPECIFIC GRAVITY; CAPACITY 0.01 NOT LESS THAN 200 GRAMS, THREE OR FOUR WEIGHT BEAMS: 0.01 GRAM SENSITIVITY

Association of German Mechanical Engineers, The specific heat capacity of indium

DVS 2205-5-1986 Mathematical calculation of containers and vessels of thermoplastic polymers; square containers
DVS 2205-5-1980 Calculation of containers and apparatuses of thermoplastics; rectangular containers
DVS 2205-5 Beiblatt-1984 "Calculation of containers and apparatuses of thermoplastics; rectangular containers, structural details"
DVS 2205-2-1974 "Calculation of containers and apparatuses of thermoplastics; standing round, unpressurized containers"
DVS 2205-1 Beiblatt 19-2008
DVS 2205-5 Beiblatt-1982

FI-SFS, The specific heat capacity of indium

CU-NC, The specific heat capacity of indium

NC 15-76-1987 Thermotechnics. Heat Rate Values per Time Unit due to Food Products Respiration

Society of Automotive Engineers (SAE), The specific heat capacity of indium

SAE AMS3637F-1993 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Clear, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio
SAE AMS3637G-2012 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation, Clear, Flexible, Heat Shrinkable, 2 to 1 Shrink Ratio
SAE AMS3638F-1993 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Pigmented, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio
SAE AMS3638G-2012 Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Pigmented, Semi-Rigid, Heat-Shrinkable, 2 to 1 Shrink Ratio
SAE AMS3623D-1993 Tubing, Irradiated Polychloroprene Elastomer, Electrical Insulation Flexible, Heat-Shrinkable, 1.750 to 1 Shrink Ratio

International Electrotechnical Commission (IEC), The specific heat capacity of indium

IEC 60949:1988/AMD1:2008 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects; Amendment 1

Professional Standard - Non-ferrous Metal, The specific heat capacity of indium

YS/T 484-2005 Method for measuring the discharge capacity of the hydrogen storage alloys as the negative electrode of the metal hydride-nickel battery
YS/T 276.5-2011 Methods for chemical analysis of indium.Part 5:Determination of iron content.Method 1:Graphite furnace atomic absorption spectrometry.Method 2:Flame atomic absorption spectrometry

Natural Gas Processor's Association (NGPA), The specific heat capacity of indium

GPA RR-109-1987 Acoustic Determination of the Thermodynamic Reference State Heat Capacity of n-Heptane Vapor
GPA RR-123-1989 Reference State Heat Capacities of Three C-8 Compounds

American National Standards Institute （ANSI), The specific heat capacity of indium

ANSI/ASTM C1039:2000 Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes

国家能源局, The specific heat capacity of indium

SH/T 0959-2017 Determination of specific surface area of catalytic cracking catalysts Static nitrogen adsorption capacity method

US-FCR, The specific heat capacity of indium

FCR AF I32-1068-1998 HEATING SYSTEMS AND UNFIRED PRESSURE VESSELS
FCR AF AFI AMC 32-1068 SUPP 1-1995 HEATING SYSTEMS AND UNFIRED PRESSURE VESSELS

GM Europe, The specific heat capacity of indium

GME QK 000117-1983 Polyamid 6 mit 25 Gew.-% Glasfasern, w鋜mestabilisiert Polyamide 6 with 25 % by Mass Glass Fibres, Heat Stabilized German
GME QK 001157-1983 Polyamid 6 mit 50 Massenanteil in % Glasfasern, w鋜mestabilisiert Polyamide 6 with 50 % by Mass Glass Fibres, Heat Stabilized German
GME QK 001168-1983 Hochschlagz鋒es Polyamid 66 mit 20 Massenanteil in % Glasfasern, hitzestabilisiert High Impact Resistant Polyamide 66 with 20 % by Mass Glass Fibre, Heat Stabilized German
GME QK 001175-1983 Polyamid 66 mit 30 Massenanteil in % Glasfasern, stabilisiert Polyamide 66 with 30 % by Mass Glass Fibres, Heat Stabilized German
GME QK 001177-1983 Polyamid 66 mit 35 Massenanteil in % Glasfasern, hitzestabilisiert Polyamide 66 with 35 % by Mass Glass Fibres, Heat Stabilized German

WRC - Welding Research Council, The specific heat capacity of indium

BULLETIN 302-1985 POSTWELD HEAT TREATMENT OF PRESSURE VESSELS ; RELAXATION STRESSES IN PRESSURE VESSELS ; A STUDY OF RESIDUAL STRESS IN PRESSURE VESSEL STEELS

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, The specific heat capacity of indium

ITU-R F.339-6-1986 Bandwidths@ Signal-to-Noise Ratios and Fading Allowances in Complete Systems - Section 3Aa - Technical Characteristics

AGMA - American Gear Manufacturers Association, The specific heat capacity of indium

ISO 14179-1:2004 Gear Reducers - Thermal Capacity Based on ISO/TR 14179-1

ES-AENOR, The specific heat capacity of indium

UNE 9-105-1992 Boilers, economizers, reheaters superheaters. Hydraulic pressure test

GOSTR, The specific heat capacity of indium

GOST 22667-1982 Combustible natural gases. Calculation method for determination of calorific value, specific gravity and Wobbe index