ZH
RU
ES
adhesive test
adhesive test, Total:160 items.
In the international standard classification, adhesive test involves: Adhesives, Bearings, Paints and varnishes, Construction materials, Waxes, bituminous materials and other petroleum products, Paint ingredients, Education, Materials and components for railway engineering, Products of the textile industry.
Korean Agency for Technology and Standards (KATS), adhesive test
United States Navy, adhesive test
Association Francaise de Normalisation, adhesive test
- NF EN ISO 9664:1995 Adhésifs - Méthodes d'essai de tenue à la fatigue d'adhésifs structuraux en traction-cisaillement.
- NF EN 1067:2006 Adhésifs - Examen et préparation des échantillons pour essais
- NF EN 12594:2014 Bitumes et liants bitumineux - Préparation des échantillons d'essai
- NF EN ISO 22637:2019 Adhésifs - Essai des adhésifs pour revêtements de sol - Détermination de la résistance électrique des composites et films d'adhésif
- NF EN 12964:2001 Adhésifs pour cuir et matériaux pour articles chaussants - Adhésifs à haute ténacité - Contrôle de la résistance à la chaleur des joints à une température élevée
- NF EN ISO 17178:2020 Adhésifs - Adhésifs pour le collage de parquet au sol - Méthodes d'essai et exigences minimales
- P15-437:1987 Hydraulic binders. Testing technics. Characterization of cements by fluidity measurement under mortar vibration.
- NF EN 302-7:2023 Adhésifs pour structures portantes en bois - Méthodes d'essai - Partie 7 : détermination de la durée d'utilisation dans des conditions de référence
- NF T76-503*NF ISO 21194:2019 Elastic adhesives - Testing of adhesively bonded joints - Bead peel test
- NF ISO 16525-1:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 1 : méthodes d'essai générales
- NF EN 302-5:2023 Adhésifs pour structures portantes en bois - Méthodes d'essai - Partie 5 : détermination du temps d'assemblage maximal dans des conditions de référence
- NF EN ISO 22633:2019 Adhésifs - Méthodes d'essais pour adhésifs pour revêtements de sols et revêtements muraux - Détermination des variations dimensionnelles d'un revêtement en linoléum en contact avec un adhésif
- NF EN ISO 22632:2019 Adhésifs - Méthodes d'essai d'adhésifs pour revêtements du sol et muraux - Essai de cisaillement
- NF EN ISO 22631:2019 Adhésifs - Méthodes d'essai d'adhésifs pour revêtements du sol et muraux - Essai de pelage
- NF T76-138*NF EN 17418:2021 Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures - Testing, requirements and repair strength verification
- NF ISO 16525-9:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 9 : détermination des propriétés de transmission de signal à haute vitesse
- NF ISO 16525-2:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 2 : détermination des propriétés électriques pour utilisation dans des assemblages électroniques
- NF EN 1902:2015 Adhésifs - Méthodes d'essai des adhésifs pour revêtements muraux et de sol - Essai de fluage sous contrainte de cisaillement
- NF EN 302-3:2023 Adhésifs pour structures portantes en bois - Méthodes d'essai - Partie 3 : détermination de l'influence de l'attaque d'acide des fibres de bois, résultant de traitements cycliques en température et humidité sur la résistance à la traction t...
- NF ISO 16525-4:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 4 : détermination de la résistance au cisaillement et de la résistance électrique des assemblages collés rigide sur rigide
- NF EN ISO 15908:2003 Adhésifs pour réseaux de tuyauteries en matières thermoplastiques - Méthode d'essai de stabilité thermique d'un adhésif
Danish Standards Foundation, adhesive test
- DS/EN 1067:2006 Adhesives - Examination and preparation of samples for testing
- DS/EN 12594:2007 Bitumen and bituminous binders - Preparation of test samples
- DS/EN 14293:2006 Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements
- DS/EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
Lithuanian Standards Office , adhesive test
- LST EN 1067-2006 Adhesives - Examination and preparation of samples for testing
- LST EN 12594-2007 Bitumen and bituminous binders - Preparation of test samples
- LST EN 14293-2007 Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements
- LST EN ISO 7143:2007 Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007)
- LST EN 17418-2021 Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures - Testing, requirements and repair strength verification
- LST EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
AENOR, adhesive test
- UNE-EN 1067:2006 Adhesives - Examination and preparation of samples for testing
- UNE-EN 12594:2015 Bitumen and bituminous binders - Preparation of test samples
- UNE 104281-5-1:1990 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. PAINTS AND ADHESIVES. TESTING METHODS. SAMPLING.
- UNE 104281-5-11:1988 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. PAINTING AND ADHESIVES. TEST METHODS. DISTILLATION
- UNE 104281-5-9:1991 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. PAINTINGS AND ADHESIVES. TESTING METHODS. COOLING.
- UNE-EN 14293:2007 Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements
- UNE 104281-5-14:1991 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. PAINTINGS AND ADHESIVES. TEST METHODS. COVERING CAPACITY.
- UNE 104281-5-12:1988 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. PAINTING AND ADHESIVES. TEST METHODS. APPLICATION BEHAVIOUR.
- UNE 104281-5-13:1989 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. PAINTING AND ADHESIVES. TEST METHODS. DRYING TIME.
- UNE 104281-5-17:1988 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. PAINTING AND ADHESIVES. TEST METHODS. ARTIFICIAL AGEING.
- UNE 104281-5-6:1987 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. PAINTINGS AND ADHESIVES. TESTING METHODS. KREBS-STORMER CONSISTENCY
- UNE 104281-5-3:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. PAINTING AND ADHESIVES. TESTING METHODS. DILUTION STABILITY
- UNE-EN 2781:1999 AEROSPACE SERIES. NON-METALLIC MATERIALS. STRUCTURAL ADHESIVES. TEST METHODS. DETERMINATION OF THE PRIMER THICKNESS.
- UNE 104281-5-10:1987 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. PAINTING AND ADHESIVES. TESTING METHODS. FLASH POINT. TAG CLOSED TESTER
- UNE-EN ISO 7143:2007 Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007)
- UNE 104281-5-15:1992 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. PAINTING AND ADHESIVES. TESTING METHODS. SOLUTION PAINTING IN ANOTHER ONE RESISTANCE.
- UNE-EN ISO 9142:2004 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
German Institute for Standardization, adhesive test
- DIN EN 1067:2006-03 Adhesives - Examination and preparation of samples for testing; German version EN 1067:2005
- DIN EN 12594:2023 Bitumen and bituminous binders - Preparation of test samples; German and English version prEN 12594:2023
- DIN EN 12594:2015-01 Bitumen and bituminous binders - Preparation of test samples; German version EN 12594:2014
- DIN EN 12594:2023-04 Bitumen and bituminous binders - Preparation of test samples; German and English version prEN 12594:2023 / Note: Date of issue 2023-03-17*Intended as replacement for DIN EN 12594 (2015-01).
- DIN EN ISO 9142:2004-05 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003); German version EN ISO 9142:2003
- DIN 54461:2021-03 Structural adhesives - Testing of adhesive bonds - Bending peel test
- DIN EN ISO 17178:2020-06 Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements (ISO 17178:2013); German version EN ISO 17178:2020
- DIN ISO 21194:2020-12 Elastic adhesives - Testing of adhesively bonded joints - Bead peel test (ISO 21194:2019)
- DIN EN ISO 17178:2020 Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements (ISO 17178:2013)
- DIN EN ISO 7143:2007-05 Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007); German version EN ISO 7143:2007
- DIN EN ISO 22637:2019-11 Adhesives - Test of adhesive for floor covering - Determination of the electrical resistance of adhesive films and composites (ISO 22637:2019); German version EN ISO 22637:2019
- DIN 54461:2021 Structural adhesives - Testing of adhesive bonds - Bending peel test
- DIN 54461:2005 Structural adhesives - Testing of adhesive bonds - Bending peel test
- DIN EN ISO 22637:2019 Adhesives - Test of adhesive for floor covering - Determination of the electrical resistance of adhesive films and composites (ISO 22637:2019)
- DIN EN ISO 22631:2019-11 Adhesives - Test method for adhesives for floor and wall coverings - Peel test (ISO 22631:2019); German version EN ISO 22631:2019
- DIN EN ISO 22632:2019-11 Adhesives - Test method for adhesives for floor and wall coverings - Shear test (ISO 22632:2019); German version EN ISO 22632:2019
- DIN EN 17418:2021-06 Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures - Testing, requirements and repair strength verification; German version EN 17418:2021
- DIN EN ISO 22631:2019 Adhesives - Test method for adhesives for floor and wall coverings - Peel test (ISO 22631:2019)
- DIN EN ISO 22632:2018 Adhesives - Test methods for adhesives for floor and wall coverings - Shear test (ISO/DIS 22632:2018); German and English version prEN ISO 22632:2018
- DIN EN ISO 22631:2018 Adhesives - Test method for adhesives for floor and wall coverings - Peel test (ISO/DIS 22631:2018); German and English version prEN ISO 22631:2018
- DIN EN 15416-4:2017-05 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions; German version EN 15416-4:2017
- DIN 13990:2017-04 Dentistry - Test methods for shear bond strength of adhesives for orthodontic attachments
- DIN EN ISO 15908:2003 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesive (ISO 15908:2002); German version EN ISO 15908:2002
- DIN EN ISO 22633:2020-01 Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive (ISO 22633:2019); German version EN ISO 22633:2019
RU-GOST R, adhesive test
European Committee for Standardization (CEN), adhesive test
- EN 12594:2014 Bitumen and bituminous binders - Preparation of test samples
- EN 302-5:2023 Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions
- EN 17418:2021 Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures - Testing, requirements and repair strength verification
British Standards Institution (BSI), adhesive test
- BS EN 12594:2014 Bitumen and bituminous binders. Preparation of test samples
- BS EN ISO 9142:2003 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- 23/30466176 DC BS EN 12594. Bitumen and bituminous binders. Preparation of test samples
- BS 5350-C6:1990 Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of bond strength in direct tension in sandwich panels
- BS EN 13454-2:2019 Tracked Changes. Binders for floor screeds based on calcium sulphate. Test methods
- BS EN ISO 17178:2020 Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements
- BS EN 302-8:2023 Tracked Changes. Adhesives for load-bearing timber structures. Test methods. Static load test of multiple bond line specimens in compression shear
- BS EN 302-2:2023 Tracked Changes. Adhesives for load-bearing timber structures. Test methods. Determination of resistance to delamination
- BS EN ISO 22637:2019 Adhesives. Test of adhesive for floor covering. Determination of the electrical resistance of adhesive films and composites
- 21/30439577 DC BS EN 302-2. Adhesives for load-bearing timber structures. Test methods. Part 2. Determination of resistance to delamination
- BS ISO 21194:2019 Elastic adhesives. Testing of adhesively bonded joints. Bead peel test
- BS EN 302-7:2023 Tracked Changes. Adhesives for load-bearing timber structures. Test methods. Determination of the working life under referenced conditions
- BS EN 302-4:2023 Tracked Changes. Adhesives for load-bearing timber structures. Test methods. Determination of the effects of wood shrinkage on the shear strength
- BS EN 302-6:2023 Tracked Changes. Adhesives for load-bearing timber structures. Test methods. Determination of the minimum pressing time under referenced conditions
- BS EN 302-5:2023 Tracked Changes. Adhesives for load-bearing timber structures. Test methods. Determination of maximum assembly time under referenced conditions
- 21/30439574 DC BS EN 302-1. Adhesives for load-bearing timber structures. Test methods. Part 1. Determination of longitudinal tensile shear strength
- 22/30447996 DC BS EN 302-8. Adhesives for load-bearing timber structures. Test methods. Part 8. Static load test of multiple bond line specimens in compression shear
- BS EN ISO 22631:2019 Adhesives. Test method for adhesives for floor and wall coverings. Peel test
- 21/30439589 DC BS EN 302-7. Adhesives for load-bearing timber structures. Test methods. Part 7. Determination of the working life under referenced conditions
- BS EN ISO 22632:2019 Adhesives. Test method for adhesives for floor and wall coverings. Shear test
- 21/30439580 DC BS EN 302-4. Adhesives for load-bearing timber structures. Test methods. Part 4. Determination of the effects of wood shrinkage on the shear strength
- 21/30439586 DC BS EN 302-6. Adhesives for load-bearing timber structures. Test methods. Part 6. Determination of the minimum pressing time under referenced conditions
- 21/30439583 DC BS EN 302-5. Adhesives for load-bearing timber structures. Test methods. Part 5. Determination of maximum assembly time under referenced conditions
- 19/30395764 DC BS EN 17418. Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures. Testing, requirements and repair strength verification
- BS EN 302-3:2023 Adhesives for load-bearing timber structures. Test methods - Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
- BS EN 15416-3:2017+A1:2019 Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods. Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
- BS EN ISO 22633:2019 Adhesives. Test methods for adhesives for floor coverings and wall coverings. Determination of dimensional changes of a linoleum floor covering in contact with an adhesive
- BS DD ISO/PAS 11856:2003 Textile floor coverings - Test methods for the determination of fibre bind
- BS EN 15416-4:2017 Tracked Changes. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods. Determination of open assembly time under referenced conditions
- BS EN 15416-5:2017 Tracked Changes. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods. Determination of minimum pressing time under referenced conditions
The American Road & Transportation Builders Association, adhesive test
- AASHTO T 237-2005(R2009) Standard Method of Test for Testing Epoxy Resin Adhesive
- AASHTO TP 91-2015 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test
- AASHTO TP 91-2011 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Asphalt Bond Strength (ABS) Test
AASHTO - American Association of State Highway and Transportation Officials, adhesive test
- T 237-2005 Standard Method of Test for Testing Epoxy Resin Adhesive
- T 237-2004 Standard Method of Test for Testing Epoxy Resin Adhesive
- TP 91-2015 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test
- TP 91-2011 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Asphalt Bond Strength (ABS) Test
Standard Association of Australia （SAA）, adhesive test
SAE - SAE International, adhesive test
- SAE J840-1982 Test Procedures for Brake Shoe and Lining Adhesives and Bonds@ Recommended Practice (August 1982)
- SAE J840-2017 Test Procedures for Brake Shoe and Lining Adhesives and Bonds@ Recommended Practice (August 1982)
Society of Automotive Engineers (SAE), adhesive test
- SAE J840B-1968 TEST PROCEDURES FOR BRAKE SHOE AND LINING ADHESIVES AND BONDS
- SAE J840-1962 TEST PROCEDURES FOR BRAKE SHOE AND LINING ADHESIVES AND BONDS
- SAE J840C-1971 TEST PROCEDURES FOR BRAKE SHOE AND LINING ADHESIVES AND BONDS
IN-BIS, adhesive test
- IS 13826 Pt.7-1993 Bitumen based felts. Methods of test. Part 7: Determination of binder test
AT-ON, adhesive test
- ONORM B 3609-1994 Bitumen, modified bitumen and bituminous binders - Preparation of test samples
- OENORM EN 17418-2021 Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures - Testing, requirements and repair strength verification
ES-UNE, adhesive test
- UNE-EN ISO 17178:2020 Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements (ISO 17178:2013)
- UNE-EN ISO 22637:2020 Adhesives - Test of adhesive for floor covering - Determination of the electrical resistance of adhesive films and composites (ISO 22637:2019)
- UNE-EN 2667-2:2018 Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 2: Compressive tube shear (Endorsed by Asociación Española de Normalización in March of 2018.)
- UNE-EN ISO 22632:2020 Adhesives - Test method for adhesives for floor and wall coverings - Shear test (ISO 22632:2019)
- UNE-EN ISO 22631:2020 Adhesives - Test method for adhesives for floor and wall coverings - Peel test (ISO 22631:2019)
- UNE-EN 17418:2021 Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures - Testing, requirements and repair strength verification
- UNE-EN ISO 22633:2020 Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive (ISO 22633:2019)
GM Daewoo, adhesive test
- GMKOREA EDS-T-7713-2012 Method of Testing the Adhesion Strength of Adhesives ???? ???? ???? Version 3; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW3371 [Replaced: GMKOREA EDS-T-7713]
GM North America, adhesive test
Association of German Mechanical Engineers, adhesive test
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, adhesive test
- PREN 2243-1-1980 Structural Adhesives Test Methods Part 1 - Single Lap Shear Aerospace Series (Edition 1)
(U.S.) Ford Automotive Standards, adhesive test
CZ-CSN, adhesive test
未注明发布机构, adhesive test
- BS EN ISO 9142:2003(2007) Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints
CH-SNV, adhesive test
- SN EN 17418-2021 Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures - Testing, requirements and repair strength verification
IT-UNI, adhesive test
- UNI EN 17418-2021 Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures - Testing, requirements and repair strength verification
Japanese Industrial Standards Committee (JISC), adhesive test
RO-ASRO, adhesive test