ZH
RU
ES

Particle Specification Table

Particle Specification Table, Total:500 items.

In the international standard classification, Particle Specification Table involves: Wood-based panels, Animal feeding stuffs, Nuclear energy engineering, Inorganic chemicals, Particle size analysis. Sieving, Meat, meat products and other animal produce, Construction materials, Photography, Testing of metals, Measurement of volume, mass, density, viscosity, Domestic, commercial and industrial heating appliances, Air quality, Cork and cork products, Pipeline components and pipelines, Products of the chemical industry, Pesticides and other agrochemicals, Elements of buildings, Metalliferous minerals, Soil quality. Pedology, Measurement of fluid flow, Pharmaceutics, Construction industry, Welding, brazing and soldering, Farming and forestry, Processes in the food industry, Protective equipment, Physics. Chemistry, Quality, Agricultural machines, implements and equipment, Earthworks. Excavations. Foundation construction. Underground works, Fuels, Adhesives, Lubricants, industrial oils and related products, Beverages, Tobacco, tobacco products and related equipment, Analytical chemistry, Internal combustion engines, Cereals, pulses and derived products, Fluid power systems, Linear and angular measurements, Tea. Coffee. Cocoa, Geology. Meteorology. Hydrology, Paints and varnishes, Mining and quarrying, Aerospace fluid systems and components, Rubber, Installations in buildings, Water quality, Sports equipment and facilities, Vocabularies, Medical equipment, Measurement of time, velocity, acceleration, angular velocity, Road vehicle systems, Plastics, Laboratory medicine, Materials and components for railway engineering, Ventilators. Fans. Air-conditioners, Coatings and related processes used in aerospace industry, Occupational safety. Industrial hygiene, Tyres, External sewage systems, Power stations in general, Environmental protection, Road engineering.


HU-MSZT, Particle Specification Table

IN-BIS, Particle Specification Table

ES-UNE, Particle Specification Table

  • UNE-EN 60819-3-4:2014 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles (Endorsed by AENOR in June of 2014.)
  • UNE-EN ISO 17225-2:2021 Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2021)
  • UNE-EN ISO 17225-6:2022 Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO 17225-6:2021)
  • UNE 77219:1998 ERRATUM:2009 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications.
  • UNE-ISO 4387:2008/Amd 2:2018 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
  • UNE-ISO 4387:2008/Amd.1:2010 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
  • UNE-EN ISO 14644-9:2022 Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022)
  • UNE-EN ISO 20023:2020 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications (ISO 20023:2018)
  • UNE-EN ISO 10808:2010 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing (ISO 10808:2010) (Endorsed by AENOR in February of 2011.)

RU-GOST R, Particle Specification Table

ES-AENOR, Particle Specification Table

BELST, Particle Specification Table

AENOR, Particle Specification Table

  • UNE 56920:1990 GRANULATED CORK AND CORK POWDER. SPECIFICATIONS.
  • UNE 55547:1981 SURFACE ACTIVE AGENTS. POWDERS AND GRANULES. MEASUREMENT OF THE ANGLE OF REPOSE
  • UNE-EN 543:2003 Adhesives - Determination of apparent density of powder and granule adhesives
  • UNE-ISO 4387:2008 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
  • UNE-ISO 4387:2008/A1:2010 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
  • UNE-EN ISO 17225-2:2014 Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2014)
  • UNE-EN ISO 17225-6:2014 Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO 17225-6:2014)
  • UNE-EN 14955:2006 Surfaces for sports areas - Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas
  • UNE-EN 14666:2005 Surface active Agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method

British Standards Institution (BSI), Particle Specification Table

  • BS ISO 26824:2022 Tracked Changes. Particle characterization of particulate systems. Vocabulary
  • BS ISO 9276-6:2008 Representation of results of particle size analysis - Descriptive and quantitative representation of particle shape and morphology
  • BS 7554:1992 Specification for beaded desiccant silica gel
  • BS ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption. BET method
  • BS EN ISO 17225-2:2021 Tracked Changes. Solid biofuels. Fuel specifications and classes. Graded wood pellets
  • BS ISO 4387:2000+A1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • BS ISO 4387:2019 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • BS ISO 4387:2000+A2:2017 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • BS ISO 20998-2:2022 Tracked Changes. Measurement and characterization of particles by acoustic methods.. Linear theory
  • BS ISO 22640:2023 Rubber. Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
  • BS ISO 17175:2017 Bidis. Determination of total and nicotine-free dry particulate matter using a linear routine analytical smoking machine
  • 20/30399876 DC BS EN ISO 17225-2. Solid biofuels. Fuel specifications and classes. Part 2. Graded wood pellets
  • BS EN 16809-2:2017 Thermal insulation products of buildings. In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads. Specification for the bonded and loose-fill products after installation
  • 20/30399888 DC BS EN ISO 17225-6. Solid biofuels. Fuel specifications and classes - Part 6. Graded non-woody pellets
  • PD ISO/TS 14101:2012 Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method
  • 17/30337552 DC BS ISO 17175. Bidis. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • BS EN 933-5:1998 Tests for geometrical properties of aggregates - Determination of percentage of crushed and broken surfaces in coarse aggregate particles
  • BS ISO 17853:2011 Wear of implant materials. Polymer and metal wear particles. Isolation and characterization
  • BS EN ISO 16890-1:2016 Air filters for general ventilation. Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM)
  • BS ISO 20804:2022 Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
  • 22/30448665 DC BS ISO 22640. Rubber. Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
  • BS PAS 510:2021 Plastic pellets, flakes and powders. Handling and management throughout the supply chain to prevent their leakage to the environment. Specification
  • BS EN 14666:2005 Surface active agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method
  • BS PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
  • BS EN 14227-1:2013 Hydraulically bound mixtures. Specifications. Cement bound granular mixtures

CZ-CSN, Particle Specification Table

CU-NC, Particle Specification Table

  • NC 43-18-1986 Artificial Wood. Partiole Board Quality Specifications
  • NC 44-04-1985 Ores. Granular Nickel Oxide Quality Specifications
  • NC 88-47-1984 Tobacco and Tobacco Products Granulated Black Cut Tcbacco Quality Specifications
  • NC 43-40-1988 Artificial and Natural Wood Industry. Coated Particle Boards. Testing Methods
  • NC 43-08-6-1987 Artificial and Natural Wood Industry. Partiole Boards. Tensile Strength Perpendicular to Board Surface
  • NC 26-116-1985 Drugs. Granulars. General Quality Specifications

未注明发布机构, Particle Specification Table

  • JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
  • BS EN 543:2003(2007) Adhesives — Determination of apparent density of powder and granule adhesives

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Particle Specification Table

  • GB/T 41948-2022 Particle Characterization Sample Preparation
  • GB/T 15445-1995 Graphical representation of results of particle size analysis
  • GB 15445-1995 Graphical representation of particle size analysis results
  • GB/T 16742-2008 Function representation of particle size distribution.Power-function
  • GB/T 16742.1-1997 Function representation of particle size distribution. Power-function
  • GB/T 19921-2005 Test method of particles on silicon wafer surfaces
  • GB/T 11986-1989 Surface active agents--Powders and granules--Mesurement of the angle of repose
  • GB/T 7702.21-1997 Standard test method for granular activated carbon from coal--Determination of specific surface area
  • GB/T 29023.2-2016 Measurement and characterization of particles by acoustic method.Part 2: Guidelines for linear theory
  • GB/T 24351-2009 Universal technical specifications for vertical counter-flow pellet feed coolers
  • GB/T 7702.20-2008 Test method for granular activated carbon from coal.Determination of pore volume and specific surface area
  • GB/T 42311-2023 Characterization of Nanoparticles in Respiratory Exposure Chambers for Nanotechnology Inhalation Toxicity Studies
  • GB/T 29023.1-2012 Measurement and characterization of particles by acoustic methods.Part 1:Concepts and procedures in ultrasonic attenuation spectroscopy

American Society for Testing and Materials (ASTM), Particle Specification Table

  • ASTM C1076-09(2015) Standard Specification for Nuclear Grade Hafnium Oxide Pellets
  • ASTM C1066-09(2015) Standard Specification for Nuclear Grade Zirconium Oxide Pellets
  • ASTM C785-08(2015) Standard Specification for Nuclear-Grade Aluminum Oxide Pellets
  • ASTM D3462/D3462M-16 Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
  • ASTM UOP294-93 Apparent Bulk Density of Catalyst Particles
  • ASTM C922-21 Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets for Light Water Reactors
  • ASTM C922-14 Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets
  • ASTM UOP294-14 Apparent Bulk Density of Catalyst Particles
  • ASTM D3018/D3018M-11 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM E1509-12(2017) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
  • ASTM D3018/D3018M-09 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM D3018-03 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM D3018-00 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM D3018-03(2009) Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM D3018/D3018M-10 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM D225-65(1978) Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
  • ASTM D3018/D3018M-22 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM A139/A139M-04(2015) Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
  • ASTM D3909/D3909M-14(2021) Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules
  • ASTM D225-01 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
  • ASTM D225-03 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
  • ASTM D225-04 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
  • ASTM D225-02 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
  • ASTM D3018/D3018M-11(2017) Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM D6225-98e1 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
  • ASTM D6225/D6225M-98(2020) Standard Test Method for Granule Cover of Mineral-Surfaced Roofing
  • ASTM D3909/D3909M-22 Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules
  • ASTM D6552-06 Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
  • ASTM D6552-00 Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
  • ASTM C1066-97(2004) Standard Specification for Nuclear Grade Zirconium Oxide Pellets
  • ASTM C1066-97 Standard Specification for Nuclear Grade Zirconium Oxide Pellets
  • ASTM D3462-76 Standard Specification for Asphalt Shingles Made From Glass Mat And Surfaced With Mineral Granules
  • ASTM C785-08(2022) Standard Specification for Nuclear-Grade Aluminum Oxide Pellets
  • ASTM C1066-09(2022) Standard Specification for Nuclear Grade Zirconium Oxide Pellets
  • ASTM C1076-09(2022) Standard Specification for Nuclear Grade Hafnium Oxide Pellets
  • ASTM D6225-98 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
  • ASTM D6225-98(2004) Standard Test Method for Granule Cover of Mineral Surfaced Roofing
  • ASTM D6225/D6225M-98(2012)e1 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
  • ASTM D7684-11(2020) Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
  • ASTM D7684-11(2016) Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
  • ASTM C1076-09 Standard Specification for Nuclear Grade Hafnium Oxide Pellets
  • ASTM C785-08 Standard Specification for Nuclear-Grade Aluminum Oxide Pellets
  • ASTM D3462/D3462M-23 Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
  • ASTM A983/A983M-06(2016) Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
  • ASTM D8208-19 Standard Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler
  • ASTM F24-09(2015) Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
  • ASTM F24-20 Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
  • ASTM F1428-92(1999) Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
  • ASTM F1428-92(2017) Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
  • ASTM F327-08(2022) Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
  • ASTM E1509-95(2000) Standard Specification for Room Heaters, Pellet Fuel-Burning Type
  • ASTM D3018/D3018M-10a Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • ASTM E1509-22 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
  • ASTM C784-20 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
  • ASTM D4512-03 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
  • ASTM D4512-03(2008) Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
  • ASTM D4512-03(2013) Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
  • ASTM D4512-03(2013)e1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
  • ASTM D451-91(1996)e1 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
  • ASTM D451/D451M-17 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
  • ASTM D5651-21 Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
  • ASTM C1252-03 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
  • ASTM C1252-06 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
  • ASTM E1509-04 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
  • ASTM C922-08 Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets
  • ASTM F1904-14 Standard Practice for Testing the Biological Responses to Particles in vivo
  • ASTM D2687-95(2016) Standard Practices for Sampling Particulate Ion-Exchange Materials
  • ASTM E1509-12 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
  • ASTM D4512-99 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
  • ASTM D4977/D4977M-03(2019) Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
  • ASTM D4977/D4977M-20 Standard Test Method for Granule Adhesion to Mineral-Surfaced Roofing by Abrasion
  • ASTM C1252-98 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
  • ASTM D5817-96 Standard Practice for Carbon Black, Pelleted-Reduction and Blending of Gross Samples
  • ASTM D7530/D7530M-17 Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
  • ASTM D7505/D7505M-17 Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
  • ASTM F2743-11 Standard Guide for Coating Inspection and Acute Particulate Characterization of Coated Drug-Eluting Vascular Stent Systems

Korean Agency for Technology and Standards (KATS), Particle Specification Table

  • KS M ISO 3628:2019 Photography — Processing chemicals —Specifications for boric acid, granular
  • KS A ISO 9276-2:2003 Representation of results of particle size analysis-Part 2:Calculation of average particle sizes/diameters and moments from particle size distributions
  • KS A ISO 9276-2:2014 Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
  • KS M ISO 2031:2020 Granulated cork — Determination of apparent bulk density
  • KS M ISO 4324-2007(2012) Surface active agents－Powders and granules－Measurement of the angle of repose
  • KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method
  • KS M 1429-2013 Determination of the specific surface area of media(pelletized) - Gas adsorption method
  • KS E 3605-1996(2021) Particulate materials -General rules for methods of sampling
  • KS E 3605-1996(2016) Particulate materials -General rules for methods of sampling
  • KS P ISO 17853:2020 Wear of implant materials — Polymer and metal wear particles — Isolation and characterization

KR-KS, Particle Specification Table

  • KS M ISO 3628-2019 Photography — Processing chemicals —Specifications for boric acid, granular
  • KS M ISO 2031-2020 Granulated cork — Determination of apparent bulk density
  • KS P ISO 17853-2020 Wear of implant materials — Polymer and metal wear particles — Isolation and characterization

Professional Standard - Agriculture, Particle Specification Table

Association Francaise de Normalisation, Particle Specification Table

  • NF X11-632-2:2001 Representation of results of particle size analysis - Part 2 : calculation of average particle sizes/diameters and moments from particle size distributions.
  • NF ISO 882-2:1993 Cardamome {Elettaria} {Cardamomum} ({Linnaeus}) Maton var. {Minuscula} burkill - Spécifications - Partie 2 : graines.
  • NF X11-634:1988 Granulométrie - Caractérisation de la taille et de la forme des éléments d'une population granulaire
  • NF U42-810:1986 Porous fertillzers - Determination of granule apparent specific gravity
  • NF EN 60626-3/A1:2013 Matériaux combinés souples destinés à l'isolement électrique - Partie 3 : spécifications pour matériaux particuliers
  • NF EN 60626-3:2008 Matériaux combinés souples destinés à l'isolement électrique - Partie 3 : spécifications pour matériaux particuliers
  • XP T47-765:2011 End of Life Tyres (ELT) - Characterisation of granulates from granulation processes - Guidance for a testing campaign
  • XP T47-766:2013 End of life tyres (ELT) - Characterization of granulates from granulation processes - Evaluation of the odour intensity
  • NF T73-008:1978 Surface active agents. Powders and granules.measurement of the angle of repose.
  • FD ISO/TR 27628:2007 Air des lieux de travail - Particules ultrafines, nanoparticules et aérosols nanostructurés - Caractérisation et évaluation de l'exposition par inhalation
  • NF EN 60672-3:1998 Matériaux isolants à base de céramique ou de verre - Partie 3 : spécifications pour matériaux particuliers.
  • NF EN ISO 17225-2:2021 Biocombustibles solides - Classes et spécifications des combustibles - Partie 2 : classes de granulés de bois
  • NF EN 543:2003 Adhésifs - Détermination de la masse volumique apparente des adhésifs en poudre et en granules
  • NF EN ISO 17225-6:2021 Biocombustibles solides - Classes et spécifications des combustibles - Partie 6 : classes de granulés d'origine agricole
  • NF V37-001*NF ISO 4387:2020 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • NF X34-101-6:2012 Solid biofuels - Fuel specifications and classes - Part 6 : non-woody pellets for non-industrial use.
  • NF EN 60371-3-9/A1:2013 Matériaux isolants à base de mica - Partie 3 : spécifications pour matériaux particuliers - Feuille 9 : micanite moulable
  • NF EN 60371-3-9:1996 Matériaux isolants à base de mica - Partie 3 : spécifications pour matériaux particuliers - Feuille 9 : micanite moulable
  • NF E48-695:2003 Hydraulic fluid power - Parts and components - Expression of particulate pollution measurement results.
  • NF ISO 4387:2020 Cigarettes - Détermination de la teneur en matière particulaire totale et en matière particulaire anhydre et exempte de nicotine au moyen d'une machine à fumer analytique de routine
  • NF X11-632-4*NF ISO 9276-4:2001 Representation of results of particle size analysis - Part 4 : characterization of a classification process
  • NF P90-147*NF EN 14955:2005 Surfaces for sports areas - Determination of composition and particle shape on unbound mineral surfaces for outdoor sports areas
  • XP T43-125*XP ISO/TS 22640 :2019 Rubber - Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
  • NF S86-300:1996 Horlogerie - Cahier des charges pour cadrans de montres
  • NF EN 60674-3-7:1998 Spécification pour les films en matière plastique - Partie 3 : spécifications pour matériaux particuliers - Feuille 7 : prescriptions pour les films de fluoroéthylène-propylène (FEP), utilisés dans l'isolation électrique.
  • NF S57-035-9:2005 Fireworks - Part 9 : crackling granules - Specification and test methods.
  • NF EN IEC 63356-1:2022 Caractéristiques de source lumineuse à LED - Partie 1 : Feuilles de caractéristiques
  • NF EN 17521:2021 Produits alimentaires - Détermination de la teneur en toxines d'Alternaria dans la tomate, le blé et les graines de tournesol purification par SPE et CLHP-SM/SM
  • NF EN 12271:2007 Enduits superficiels - Spécifications
  • NF EN IEC 60674-3-2:2019 Spécification pour les films en matière plastique à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 2 : exigences pour les films de polyéthylène-téréphtalate (PET), à orientation biaxe équilibrée, utili...
  • NF EN 60454-3-1/A1:2010 Rubans adhésifs sensibles à la pression à usages électriques - Partie 3-1 : spécifications pour matériaux particuliers - Rubans en PVC avec un adhésif sensible à la pression
  • NF X43-133*NF EN ISO 28439:2011 Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential mobility analysing systems.
  • NF X34-240*NF EN ISO 20023:2018 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications
  • NF P18-622-5*NF EN 933-5:1998 Tests for geometrical properties of aggregates. Part 5 : determination of percentage of crushed and broken surfaces in coarse aggregate particles.

国家市场监督管理总局、中国国家标准化管理委员会, Particle Specification Table

  • GB/T 19921-2018 Test method for particles on polished silicon wafer surfaces
  • GB/T 39095-2020 Aerospace—Hydraulic fluid components—Expression of particulate contamintion levels

Universal Oil Products Company (UOP), Particle Specification Table

Beijing Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB11/T 1819-2021 Technical specifications for grid monitoring and evaluation of ambient air particulate matter
  • DB11/T 2056-2022 Technical specifications for grid-based monitoring of total suspended particulate matter in ambient air

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Particle Specification Table

  • ASHRAE OR-16-C025-2016 Characterizing the In-Situ Size-Resolved Removal Efficiency of Residential HVAC Filters for Fine and Ultrafine Particles
  • ASHRAE LV-11-C053-2011 Development of an Experimental Methodology to Determine Monolayer and Multilayer Particle Resuspension from Indoor Surfaces
  • ASHRAE LO-09-010-2009 Grease Particle Emission Characterization from Seven Commercial Kitchen Cooking Appliances and Representative Food Products

农业农村部, Particle Specification Table

  • NY/T 3589-2020 Technical Specifications for Granular Fertilizer
  • NY/T 4128-2022 General technical specifications for expanded pellet feed for fishing

International Organization for Standardization (ISO), Particle Specification Table

  • ISO/CD 19996 Charge conditioning of aerosol particles for particle characterization and the generation of calibration and test aerosols
  • ISO/DIS 19996:2011 Charge conditioning of aerosol particles for particle characterization and the generation of calibration and test aerosols
  • ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption - BET method
  • ISO 4324:1977 Surface active agents; Powders and granules; Measurement of the angle of repose
  • ISO 17225-2:2021 Solid biofuels — Fuel specifications and classes — Part 2: Graded wood pellets
  • ISO 9276-6:2008 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology
  • ISO 22640:2023 Rubber — Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
  • ISO/PRF 22640 Rubber — Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
  • ISO 17853:2010 Wear of implant materials - Polymer and metal wear particles - Isolation and characterization
  • ISO/TR 10391:1992 Forage harvesters; method of determining by screening and expressing particle size of chopped forage materials
  • ISO 17853:2003 Wear of implant materials - Polymer and metal wear particles - Isolation, chacterization and quantification
  • ISO 20804:2022 Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
  • ISO/TR 23173:2021 Surface chemical analysis - Electron spectroscopies - Measurement of the thickness and composition of nanoparticle coatings
  • ISO 20023:2018 Solid biofuels — Safety of solid biofuel pellets — Safe handling and storage of wood pellets in residential and other small-scale applications
  • ISO 14644-9:2022 Cleanrooms and associated controlled environments — Part 9: Assessment of surface cleanliness for particle concentration

PL-PKN, Particle Specification Table

  • PN C04840-1989 Surface active agents Powders and granules Measurement of the angle of repose
  • PN-EN ISO 17225-2-2021-10 E Solid biofuels -- Fuel specifications and classes -- Part 2: Graded wood pellets (ISO 17225-2:2021)
  • PN B03262-1989 Concrete bins for storing granular materials and silags Design rules

Standard Association of Australia （SAA）, Particle Specification Table

Professional Standard - Water Conservancy, Particle Specification Table

  • SL 42-1992 Technical standard for determination of sediment particle size in open channels
  • SL 42-2010 Technical standard for determination of sediment particle size in open channels
  • SL 42-1992（条文说明） Technical standard for determination of sediment particle size in open channels(explanation)
  • SL 237-006-1999 Code for test of soil - grain size analysis test
  • SL 237-055-1999 Code for test of soil - coarse grained soil compaction test
  • SL 237-058-1999 Code for test of soil - coarse grained soil consolidation test
  • SL 237-053-1999 Code for test of soil - preparation of coarse grained soil sample
  • SL 237-054-1999 Code for test of soil - relative density test of coarse grained soil
  • SL 237-059-1999 Code for test of soil - coarse grained soil direct shear test
  • SL 237-060-1999 Code for test of soil - coarse grained soil triaxial compression test

Group Standards of the People's Republic of China, Particle Specification Table

  • T/CACM 1363-2021 Packaging specification of granule forms of individual medicinals for prescriptions
  • T/SHPPA 008-2020 General specification for producing traditional Chinese medicine granules
  • T/CCPIA 054-2020 Guidelines on development of specifications for controlled release granules
  • T/SDNY 024-2021 Code of practice for safe production of pesticide granules
  • T/SDNY 017-2021 Pesticide granules production process operating procedures
  • T/SDGSY 6-2022 Specification for sphericity of manufactured sand with funnel test
  • T/CTSS 20-2021 Processing technical regulations of granular green tea made by machine-plucking fresh leaves
  • T/CNHAW 0005-2021 Technical specification for separation and purification of magnetic nanoparticles with resin
  • T/CECS 1144-2022 Technical specification for the application of cement-based particle-mixed lightweight board
  • T/WJZZ 009-2021 Whole measurement calibration method of particle number concentration measuring instrument
  • T/CECS 586-2019 Technical specification for pollution control of fine particulate matter (PM2.5) in building
  • T/CECS 923-2021 Technical specification for the application of particle mixed multifunctional composite mortar
  • T/ZZXJX 256-2022 Technical specification for the application of particle mixed multifunctional composite mortar
  • T/CECS 578-2019 Technical specifications for application of expanded polystyrene granule lightweight aggregate concrete block
  • T/CICEIA /CAMS24-2021 Diesel engine-Particulate filter-Product quality grading specification
  • T/NAASS 005-2020 Technical Specification for Preparation of Caragana Korshinskii Total Mixed Granular Diet for Fatten Sheep
  • T/SDAA 2023-0064 Processing Technical Regulations for Total Mixed Ration Pellet Feed of Sika Deer
  • T/CECS 571-2019 Technical specification for the application of particle-reinforced thermosetting resin inspection wells
  • T/SSM 5-2022 Calibration specifications for particle number concentration measuring instruments used in motor vehicle emissions
  • T/HPAESRCU 0008-2021 Technical Specification for Green-design Product Assessment - Ecological Oxygen-containing Laundry Granules

TH-TISI, Particle Specification Table

  • TIS 1759-1999 Surface active agents.powders and granules.measurement of the angle of repose

BE-NBN, Particle Specification Table

  • NBN T 63-140-1980 Surface active agents - Powders and granules - Measurement of the angle of repose

German Institute for Standardization, Particle Specification Table

  • DIN ISO 4324:1983-12 Surface active agents; powders and granules; measurement of the angle of repose
  • DIN EN ISO 17225-2:2021-09 Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2021); German version EN ISO 17225-2:2021
  • DIN ISO 9276-6:2012-01 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology (ISO 9276-6:2008)
  • DIN EN ISO 17225-6:2021-11 Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO 17225-6:2021); German version EN ISO 17225-6:2021
  • DIN EN 543:2003-08 Adhesives - Determination of apparent density of powder and granule adhesives; German version EN 543:2003
  • DIN 66145:1976 Graphical representation of particle size distributions; RRSB-grid
  • DIN 66145:1976-04 Graphical representation of particle size distributions; RRSB-grid
  • DIN ISO 4387:2021-03 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine (ISO 4387:2019)
  • DIN EN 14666:2005 Surface active agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method; German version EN 14666:2005
  • DIN 66143:1974 Graphical representation of particle size distributions; power-function grid
  • DIN 66143:1974-03 Graphical representation of particle size distributions; power-function grid
  • DIN EN 14955:2006 Surfaces for sports areas - Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas; English version of DIN EN 14955:2006
  • DIN 66144:1974 Graphical representation of particle size distributions; log-normal grid
  • DIN 66144:1974-03 Graphical representation of particle size distributions; log-normal grid
  • DIN ISO/TS 80004-3:2011 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2010)
  • DIN EN ISO 17225-6:2020 Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO/DIS 17225-6:2020); German and English version prEN ISO 17225-6:2020
  • DIN ISO 9276-6:2012 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology (ISO 9276-6:2008)
  • DIN EN 14955:2006-01 Surfaces for sports areas - Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas; German version EN 14955:2005
  • DIN EN ISO 14644-9:2022-10 Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022); German version EN ISO 14644-9:2022
  • DIN 66135-1:2001-06 Particle characterization - Micropore analysis by gas adsorption - Part 1: Fundamentals and testing procedure
  • DIN EN 16809-2:2017 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation; German version EN
  • DIN EN ISO 20023:2019-04 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications (ISO 20023:2018); German version EN ISO 20023:2018
  • DIN EN ISO 10808:2011-04 Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing (ISO 10808:2010); German version EN ISO 10808:2010

Association of German Mechanical Engineers, Particle Specification Table

  • VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
  • VDI 3489 Blatt 3-1997 Particulate matter measurement - Methods of characterizing and monitoring test aerosols - Optical particle counter
  • VDI 3489 Blatt 8-1996 Particulate matter measurement - Methods for characterizing and monitoring test aerosols - Time-of-flight spectrometer

Heilongjiang Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB23/T 1538-2013 Cement polystyrene particle formwork lattice concrete wall construction technical specification
  • DB23/T 3583-2023 Technical regulations for granulating straw and returning it to the field in multiple quantities for fertilization

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Particle Specification Table

  • GB/T 15445.6-2014 Representation of results of particle size analysis—Part 6: Descriptive and quantitative representation of particle shape and morphology
  • GB/T 36082-2018 Nanotechnologies—Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening—FT-IR method

Japanese Industrial Standards Committee (JISC), Particle Specification Table

  • JIS Z 3284-2:2014 Solder paste -- Part 2: Test methods for solder particle shape, surface condition judgment, and particle size distribution

Professional Standard - Commodity Inspection, Particle Specification Table

  • SN/T 1408-2004 Rules for the inspection of magnesium granules for export

National Metrological Verification Regulations of the People's Republic of China, Particle Specification Table

  • JJG 1061-2010 Verification Regulation of Liquid-borne Particle Counters
  • JJG 943-1998 Verification Regulation of Total Suspended Particulate Sampler
  • JJG 943-2011 Verification Regulation of Total Suspended Particulates Sampler
  • JJG(机械) 92-1992 Verification Regulations for Automatic Recording Particle Sedimentation Balance
  • JJG(机械) 7-1990 Verification rules for single particle compressive strength tester

Shanxi Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB14/T 1312-2016 Technical regulations for the production of alfalfa pellets
  • DB14/T 1162-2015 Technical regulations for the production of full mixed pellet feed for fattening sheep in house

Jiangxi Provincial Standard of the People's Republic of China, Particle Specification Table

Anhui Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB34/T 909-2009 Granular mulberry black tea processing technical regulations
  • DB34/T 4080-2021 Technical specification for mechanized processing of granular green tea

Inner Mongolia Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB15/T 2667-2022 Technical regulations for processing alfalfa pellets
  • DB15/T 2683-2022 Salix pellet feed processing technical regulations
  • DB15/T 1282-2017 Technical specification for processing natural forage grass pellets
  • DB15/T 3074-2023 Technical specifications for the processing of fully mixed pellet feed for mutton sheep

European Committee for Standardization (CEN), Particle Specification Table

  • EN ISO 17225-2:2021 Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2021)
  • EN ISO 17225-6:2021 Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO 17225-6:2021)
  • EN ISO 17225-2:2014 Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2014)
  • EN ISO 17225-6:2014 Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets
  • EN 14666:2005 Surface active agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gaschromatographic method

Danish Standards Foundation, Particle Specification Table

  • DS/ISO 17225-2:2021 Solid biofuels – Fuel specifications and classes – Part 2: Graded wood pellets
  • DS/ISO 17225-6:2021 Solid biofuels – Fuel specifications and classes – Part 6: Graded non-woody pellets
  • DS/EN 543:2003 Adhesives - Determination of apparent density of powder and granule adhesives
  • DS/EN 14961-2:2011 Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use
  • DS/ISO 4387/Amd. 1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • DS/ISO 4387:2000 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • DS/EN 14961-6:2012 Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use
  • DS/EN ISO 17225-2:2021 Solid biofuels – Fuel specifications and classes – Part 2: Graded wood pellets (ISO 17225-2:2021)
  • DS/EN ISO 17225-6:2021 Solid biofuels – Fuel specifications and classes – Part 6: Graded non-woody pellets (ISO 17225-6:2021)
  • DS/EN 14955:2006 Surfaces for sports areas - Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas
  • DS/EN 14666:2005 Surface active Agents – Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules – Gas chromatographic method

IT-UNI, Particle Specification Table

  • UNI EN ISO 17225-2:2021 Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets
  • UNI EN ISO 17225-6:2021 Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets
  • UNI 4870-1961
  • UNI/TR 11810-2-2021 Materials derived from End of Life Tyres - Guidelines for the conformity of granulates and powders to REACh and CLP Regulations - Part 2: Manufacturers of granulates/powders from ELTs as is

GOSTR, Particle Specification Table

  • GOST 33103.2-2017 Solid biofuel. Fuel specifications and classes. Part 2. Graded wood pellets
  • GOST 33103.6-2017 Solid biofuel. Fuel specifications and classes. Part 6. Graded non-woody pellets

RO-ASRO, Particle Specification Table

  • STAS 10762-1978 Surface agents CONDITIONED GRANULATED DETRGENTS General technical requirements for quality
  • STAS 7621/2-1985 NORMAL ELECTROCORUNDUM Determination of mineralogic composition and aggregate granules content

International Electrotechnical Commission (IEC), Particle Specification Table

Jiangsu Provincial Standard of the People's Republic of China, Particle Specification Table

Ningxia Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB64/T 821-2012 Technical regulations for processing mulberry leaf pellet feed
  • DB64/T 1153-2015 Technical specification for safe operation of pellet feed press
  • DB64/T 824-2012 Technical regulations for processing fermented wine grain pellet feed
  • DB64/T 822-2012 Technical Regulations for Fermented Potato Residue Pellet Feed Processing

Lithuanian Standards Office , Particle Specification Table

  • LST EN 543-2003 Adhesives - Determination of apparent density of powder and granule adhesives
  • LST EN 14961-2-2011 Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use
  • LST ISO 4387:2000 Cigarettes. Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine
  • LST EN 14961-6-2012 Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use
  • LST EN ISO 17225-2:2021 Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2021)
  • LST EN ISO 17225-6:2021 Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO 17225-6:2021)
  • LST EN 14955-2006 Surfaces for sports areas - Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas
  • LST ISO 4387:2000/A1:2008 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine - AMENDMENT 1 (ISO 4387:2000/Amd.1:2008, identical)
  • LST EN 14666-2005 Surface active Agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method

未注明发布机构, Particle Specification Table

  • JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
  • BS EN 543:2003(2007) Adhesives — Determination of apparent density of powder and granule adhesives

Indonesia Standards, Particle Specification Table

  • SNI 03-1765-1990 Coarse aggregates for concrete, Test method for flat and long grains.
  • SNI 13-6977-2003 Mineral grain - Determination of specific surface area using test methods of Lea and Nurse permeabilities
  • SNI 2547-2008 Water meter specification

Professional Standard - Chemical Industry, Particle Specification Table

  • HG/T 2467.12-2003 Guidelines on drafting specifications of pesticides
  • HG/T 3013-1999 Photography.Processing chemicals.Specifications for boric acid,granular

Yunnan Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB5305/T 67-2021 Technical Regulations for Biomass Pellet Fuel Production
  • DB53/T 992-2020 Technical Regulations for Co-cultivation of Mulberry Silkworm and Small Silkworm Granules with Artificial Feed
  • DB53/T 949-2019 Tobacco biomass pellet fuel baking operation management regulations

Sichuan Provincial Standard of the People's Republic of China, Particle Specification Table

Zhejiang Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB3305/T 260-2023 Technical regulations for supplementary feeding of lake lamb pellets

国家林业局, Particle Specification Table

  • LY/T 2669-2016 Technical regulations for monitoring air particulate matter in forests

Canadian Standards Association (CSA), Particle Specification Table

  • CAN/CSA-ISO 17225-2:2015 Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (First Edition)
  • CAN/CSA-ISO 17225-6:2015 Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (First Edition)

CEN - European Committee for Standardization, Particle Specification Table

  • EN 14961-6:2012 Solid biofuels - Fuel specifications and classes - Part 6: Nonwoody pellets for non-industrial use
  • EN 14035-9:2004 Fireworks - Part 9: Crackling granules - Specification and test methods
  • EN ISO 20023:2018 Solid biofuels - Safety of solid biofuel pellets - Safe handling and storage of wood pellets in residential and other small-scale applications

Professional Standard - Aquaculture, Particle Specification Table

  • SC/T 1030.7-1999 Technical specifications for rainbow trout culture.Formulated pellets

National Metrological Technical Specifications of the People's Republic of China, Particle Specification Table

Henan Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB41/T 1537-2018 Technical regulations for the production of peanut seedling pellets for feed
  • DB41/T 2419-2023 Technical Regulations for Co-cultivation of Mulberry Silkworm Granules with Artificial Feed

Xinjiang Provincial Standard of the People's Republic of China, Particle Specification Table

Guizhou Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB52/T 1011-2015 Fanjingshan Granular Green Tea Processing Technical Regulations

Shandong Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB37/T 3633-2019 Technical Regulations for Production of TMR Pellet Feed for Fattening Sheep

中国气象局, Particle Specification Table

  • QX/T 509-2019 GRIMM 180 Particulate Matter Concentration Monitor Calibration Specifications

CH-SNV, Particle Specification Table

  • SN EN ISO 17225-2:2021 Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2021)
  • SN EN ISO 17225-6:2021 Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO 17225-6:2021)

ET-QSAE, Particle Specification Table

Professional Standard - Recommended Standards for Engineering Construction, Particle Specification Table

Jilin Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB22/T 2386-2015 Technical Specifications for Beauveria bassiana Granules Controlling Corn Borer

Society of Automotive Engineers (SAE), Particle Specification Table

  • SAE J2943-2022 Recommended Practice for Filter Weighing of Particulate Matter Emissions
  • SAE J1378-1998 Electric Hourmeter Specification
  • SAE AMS1531D-2008 Cleaner for Aircraft Exterior Surfaces Wipe-On, Wipe-Off, Containing Suspended Abrasive Solids

SAE - SAE International, Particle Specification Table

American National Standards Institute （ANSI), Particle Specification Table

  • ANSI/ASTM D4894:1998 Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram (08.03)

AT-ON, Particle Specification Table

  • ONORM M 8126-1994 Tribotechnique - Solid particle erosion test - Basic rules
  • ONORM M 5858-1997 Air analysis - Ambient air monitoring - Requirements for monitors for suspended particulate matter - Marking of conformity
  • ONORM B 2535-1994 Meters for cold water - Specifications Compteurs d'eau froide - Specifications

Guangxi Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB45/T 2182-2020 Technical Regulations for Feeding Sugarcane Tail Beef Cattle with Pellet Feed
  • DB45/T 2181-2020 Technical regulations for the production of sugarcane tail tip pellet feed for cattle and sheep
  • DB45/T 2183-2020 Technical Regulations for Raising Sugarcane Tail Goat Pellet Feed

Professional Standard - Railway, Particle Specification Table

Professional Standard - Machinery, Particle Specification Table

  • JB/T 12653-2016 Diesel engines.Technical specifications of particle oxidation catalytic converter (POC)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Particle Specification Table

  • GJB 5975-2007 Specification for SiC particles reinforced casting A1 matrix composites
  • GJB 5443-2005 Specification for high volume fraction SiCp/Al composites

Hebei Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB13/T 2524-2017 Technical Regulations for the Production and Processing of Compound Alfalfa Grass Granules

工业和信息化部, Particle Specification Table

  • YB/T 4917-2021 Technical Specifications for Determination of Primary Flue Gas Particulate Matter from Converter Steelmaking

PT-IPQ, Particle Specification Table

  • NP EN 312-1-2002 Particleboards Specifications Part 1:General requirements for all board types

Society of Motion Picture and Television Engineers (SMPTE), Particle Specification Table

  • SMPTE RDD 5-2006 Film Grain Technology Specifications for H.264 X'A6' MPEG-4 AVC Bitstreams

Liaoning Provincial Standard of the People's Republic of China, Particle Specification Table

  • DB21/T 2904-2018 Technical specifications for quality evaluation of straw pellet processing complete sets of equipment

Professional Standard - Electricity, Particle Specification Table

  • DL/T 1915-2018 Gravimetric method for testing technical specifications of low-concentration particulate matter in thermal power plants

Professional Standard - Intellectual Property, Particle Specification Table

  • ZC 0004-2001 Form Formatting and Coding Standards Part 1: Form Code Rules

The American Road & Transportation Builders Association, Particle Specification Table

  • AASHTO TP56-1999 Standard Test Method for Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle Shape, Surface Texture, and Grading) 2000 Edition

ISA - International Society of Automation, Particle Specification Table

  Chlorinated polyvinyl chloride specification sheet, Particle size, cpvc specification sheet, Table product technical specification table, Torch Spec Sheet, Nut specification table, Specification Deviation Table, Driven shaft standard size specification table, Thread specification table, Particle Specification Table, particle table.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved