ZH
RU
ES

Precision during method validation

Precision during method validation, Total:139 items.

In the international standard classification, Precision during method validation involves: Raw materials for rubber and plastics, Petroleum products in general, Organic chemicals, Glass, Non-ferrous metals, Non-metalliferous minerals, Metalliferous minerals, Ceramics, Road engineering, Test conditions and procedures in general, Electrical wires and cables, Thermodynamics and temperature measurements, Refractories, Rubber and plastics products, Rubber, Laboratory medicine, Optics and optical measurements, Mining and quarrying, Conducting materials, Metrology and measurement in general, Iron and steel products, Quality, Soil quality. Pedology, Construction materials, Nuclear energy engineering, Inorganic chemicals, Analytical chemistry, Milk and milk products, Protection against fire.

American Society for Testing and Materials (ASTM), Precision during method validation

ASTM D4821-04 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-01 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-19 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-20 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-03 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-03a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM C729-11 Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM D4821-14 Standard Guide for Carbon Blackmdash;Validation of Test Method Precision and Bias
ASTM D4821-05 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-15 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D4821-06 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D4821-07 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D4821-07e1 Standard Guide for Carbon BlackValidation of Test Method Precision and Bias
ASTM E177-08 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E691-99 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-08 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E2847-13e1 Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
ASTM E2847-14 Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers
ASTM C838-96(2005) Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
ASTM E177-04 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-06 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-04e1 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E388-04 Standard Test Method for Wavelength Accuracy of Spectral Bandwidth Fluorescence Spectrometers
ASTM B84-07 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
ASTM B84-07(2013) Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
ASTM D4460-22 Standard Practice for Calculating Precision Limits Where Values Are Calculated from Other Test Methods
ASTM D4460-22a Standard Practice for Calculating Precision Limits Where Values Are Calculated from Other Test Methods
ASTM E177-06b Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM B114-07(2018) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
ASTM D6780/D6780M-12 Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)
ASTM D6780/D6780M-19 Standard Test Methods for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)
ASTM D6780-02 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
ASTM D6780-05 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
ASTM E691-09e1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E180-93 Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial Chemicals
ASTM C670-03 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C1215-92(2006) Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM C670-10 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C670-13 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C670-15 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C1382-97 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C1382-02 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C670-96 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM B114-07 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
ASTM B114-07(2013) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
ASTM D6300-19 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-13a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-19a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D4781-99 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM D4781-03 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM C1215-92(2012)e1 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM D4512-22 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D6300-06 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-04 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D6300-20a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D6300-21 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D6300-20 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D6300-20b Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM E2653-14 Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories

YU-JUS, Precision during method validation

JUS ISO 279:1992 Essential oils. Determination of relative density at 20 degree C (Reference method)
JUS B.G8.056-1982 Methods of analysh ofiron ore?. Experimental methods for checking theprecision of sampling

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Precision during method validation

GB/T 6683.3-2023 Precision of measurement methods and results for petroleum and related products - Part 3: Monitoring and verification of published precision data for test methods
GB/T 13216.5-1991 Test methods for glycerines--Determination of density at 20℃
GB/T 6683-1997 Petroleum products--Determination of precision data in relation to methods of test
GB/T 27679-2011 Copper,lead,zinc and nickel concentrates.Experimental methods for checking the precision of sampling
GB/T 32553-2016 Fluorspar.Method of determining the precision of sampling and sample preparation
GB/T 15338-2008 Standard guide for carbon black.Validation of test method precision and bias
GB/T 10322.3-2000 Iron ores-Experimental methods for checking the precision of sampling
GB/T 15338-2012 Carbon black.Validation of test method precision and bias
GB/T 25995-2010 Test methods for density and apparent porosity of fine ceramics
GB/T 15338-1994 Standard guide for carbon black--Validation of test method precision and bias
GB/T 14838-1993 Rubber and rubber products.Determination of precision for test method standards
GB/T 14838-2009 Rubber and rubber products.Determination of precision for test method standards
GB/T 2007.4-2008 General rules for the sampling and sample preparation of minerals in bulk-Experimental methods for checking the precision and bias
GB/T 6379-1986 Precision of test methods--Determination of repeatability and reproducibility for a standard test method by interlaboratory tests
GB/T 24233-2009 Manganese and chromium ores.Experimental methods for evaluation of quality variation and methods for checking the precision of sampling

TR-TSE, Precision during method validation

TS 2910-1977 IRON ORES - EXPERIMENTAL METHODS FOR CHECKING THE PRECISION OF SAMPLING

Association Francaise de Normalisation, Precision during method validation

NF T40-005*NF ISO 19983:2017 Rubber - Determination of precision of test methods
NF P98-880-1*NF EN 13880-1:2004 Hot applied joint sealants - Part 1 : test method for the determination of density at 25o C
NF P98-880-2*NF EN 13880-2:2004 Hot applied joint sealants - Part 2 : test method for the determination of cone penetration at 25o C
NF M07-033-3*NF EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3 : monitoring and verification of published precision data in relation to methods of test
NF EN ISO 4259-3:2020 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 3 : surveillance et vérification des données de fidélité publiées relatives aux méthodes d'essai

未注明发布机构, Precision during method validation

DIN EN ISO 4259-1:2020 Petroleum products – Precision of measurement methods and results – Part 1: Determination of precision data of test methods

国家市场监督管理总局、中国国家标准化管理委员会, Precision during method validation

GB/T 6683.1-2021 Petroleum and related products—Precision of measurement methods and results—Part 1: Determination of precision data in relation to methods of test

British Standards Institution (BSI), Precision during method validation

BS EN 13880-1:2003 Hot applied joint sealants - Test method for the determination of density at 25 °C
BS 3467:1962 Method of test for temperature coefficient of resistance of alloy wire for precision resistors
PD 6528:1990 Method for verifying accuracy of tan delta measurements applicable to capacitors
BS EN 13880-2:2003 Hot applied joint sealants - Test method for the determination of cone penetration at 25 °C
BS EN ISO 4259-3:2020 Petroleum and related products. Precision of measurement methods and results - Monitoring and verification of published precision data in relation to methods of test
18/30350503 DC BS ENISO 4259-3. Petroleum and related products. Precision of measurement methods and results. Part 3. Monitoring and verification of published precision data in relation to methods of test
BS ISO 21714:2018 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining density of ceramic coatings
BS 6092-1:1981 Methods of sampling and test for sodium and potassium silicates for industrial use - Determination of solution density at 20 °C
BS EN ISO 4259-4:2021 Petroleum and related products. Precision of measurement methods and results - Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory (ISO 4259-4:2021)

Professional Standard - Aerospace, Precision during method validation

QJ 1964-1990 Evaluation Method of Precision and Accuracy of Wind Tunnel Dynamometer Test

Professional Standard - Energy, Precision during method validation

NB/SH/T 6001-2020 Guidelines for interlaboratory studies to determine the precision of test methods

Japanese Industrial Standards Committee (JISC), Precision during method validation

JIS R 1634:1998 Test methods for density and apparent porosity of fine ceramics
JIS R 1639-2:1999 Test methods of properties of fine ceramic granules Part 2: Bulk density

German Institute for Standardization, Precision during method validation

DIN EN 13880-1:2003 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C; German version EN 13880-1:2003
DIN EN 13880-2:2003 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 °C; German version EN 13880-2:2003
DIN EN ISO 4259-3:2020-08 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020); German version EN ISO 4259-3:2020
DIN EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
DIN EN 993-7:1998 Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures; German version EN 993-7:1998
DIN EN 993-2:1995 Methods of test for dense shaped refractory products - Part 2: Determination of true density; German version EN 993-2:1995
DIN EN ISO 4259-4:2022-09 Petroleum and related products - Precision of measurement methods and results - Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory (ISO 4259-4:2021)...

CU-NC, Precision during method validation

NC 90-06-46-1988 Metrological Assurance. Weighing Instruments with Digital Indication of Sperior and Special Precisión Class. Methods and Means of Verification
NC 90-06-45-1987 Metrological Assurance. Weighing Instruments with Digital Indication of Ordinary and Medium Precisión Class. Methods and Means of Verification
NC 90-07-11-1984 Metrological Assurance. Piston-and-Weigh Gages with Upper Measurement Limits up to 250 MPa (2 500 Kgf/cm2) and Precision Classes Less Than or Equal to 0,02. Verification Methods and Means

ZA-SANS, Precision during method validation

SANS 9272:2003 Rubber and rubber products - Determination of precision for test method standards

IN-BIS, Precision during method validation

IS 5420 Pt.2-1973

American National Standards Institute （ANSI), Precision during method validation

ANSI/ASTM E177:2013 PRACTICE FOR USE OF THE TERMS PRECISION AND BIAS IN ASTM TEST METHODS
ANSI/ASTM E691:2013 PRACTICE FOR CONDUCTING AN INTERLABORATORY STUDY TO DETERMINE THE PRECISION OF A TEST METHOD

European Committee for Standardization (CEN), Precision during method validation

EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
EN ISO 4259-4:2022 Petroleum and related products - Precision of measurement methods and results - Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory (ISO 4259-4:2021)

Korean Agency for Technology and Standards (KATS), Precision during method validation

KS M ISO 4259-3:2022 Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test
KS E ISO 8530-2003(2019)
KS M ISO 4259:2009 Petroleum products－Determination and application of precision data in relation to methods of test
KS Q ISO 22971-2012(2017) Accuracy (trueness and precision) of measurement methods and results－Practical guidance for the use of ISO 5725－2:1994 in designing, implementing and statistically analysing interlaboratory repeatabil

KR-KS, Precision during method validation

KS M ISO 4259-3-2022 Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test

International Organization for Standardization (ISO), Precision during method validation

ISO 4259-3:2020 Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test
ISO 21714:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining density of ceramic coatings
ISO 8196-3:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
ISO 8196-3:2009|IDF 128-3:2009 Definition and evaluation of the overall accuracy of methods for quantification of variation in milk analysis Part 3: Methods for the evaluation and validation of methods for quantification of variation in milk analysis
ISO 4259-4:2021 Petroleum and related products — Precision of measurement methods and results — Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard te

国家药监局, Precision during method validation

YY/T 1789.1-2021 Methods for performance evaluation of in vitro diagnostic test systems Part 1: Precision
YY/T 1789.6-2023 In vitro diagnostic testing system performance evaluation methods Part 6: Precision, diagnostic sensitivity and specificity of qualitative reagents

RU-GOST R, Precision during method validation

GOST 8.465-1982 State system of ensuring the unity of measurements. Actial frequency of limited accuracy. Methods and means of verification
GOST R 8.861-2013 State system for ensuring the uniformity of measurements. Means of measuring spectral density of radiance, spectral density of radiant intensity and spectral density of irradiance in the wavelength range of 0,2-25,0 mkm. Verification procedure
GOST 8.492-1983 State system for ensuring the uniformity of measurements. Actual low precision of frequency. Methods and means of verification
GOST 8.500-1984 State system for ensuring the uniformity of measurements. State verification schedule for means of measurement of material optical density
GOST R 8.612-2005 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the surface density of coatings in the range from 0,001 to 1,000 kg/sq m
GOST 8.559-1993 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the optical density of materials in transmitted light

ES-UNE, Precision during method validation

UNE-EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)
UNE-EN ISO 4259-4:2023 Petroleum and related products - Precision of measurement methods and results - Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory (ISO 4259-4:2021)

Standard Association of Australia （SAA）, Precision during method validation

AS/NZS 2891.7.3:2014

PL-PKN, Precision during method validation

PN-EN ISO 4259-3-2020-08 P Petroleum and related products--Precision of measurement methods and results--Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)

The American Road & Transportation Builders Association, Precision during method validation

AASHTO TP24-1994 Standard Test Method for Determining the Density of Freshly Mixed Concrete in Place Using a Twin-Probe Nuclear Density Gauge 2000 Edition; Interim Edition 4/2001 R(1996)

GOSTR, Precision during method validation

GOST R 8.670-2009 State system for ensuring the uniformity of measurements. Precision inductive transducers for linear dimensions (parameters). Methods of verifications
GOST 8.537-1985 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the surface coating density in the range of 0,001-1,000 kg/m2

BELST, Precision during method validation

STB 8079-2020 System for ensuring the uniformity of measurements of the Republic of Belarus. Clock-type dial indicators graduated in unit divisions of 0,01 mm. Methods of verification